DatvRx/longmynd/ftdi.c

529 lines
22 KiB
C
Raw Normal View History

2024-06-04 19:03:30 +02:00
/* -------------------------------------------------------------------------------------------------- */
/* The LongMynd receiver: ftdi.c */
/* - an implementation of the Serit NIM controlling software for the MiniTiouner Hardware */
/* - implements all the ftdi i2c accessing routines apart from the usb stuff */
/* Copyright 2019 Heather Lomond */
/* -------------------------------------------------------------------------------------------------- */
/*
This file is part of longmynd.
Longmynd is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
Longmynd is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with longmynd. If not, see <https://www.gnu.org/licenses/>.
*/
/* -------------------------------------------------------------------------------------------------- */
/* ----------------- INCLUDES ----------------------------------------------------------------------- */
/* -------------------------------------------------------------------------------------------------- */
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <unistd.h>
#include "ftdi.h"
#include "ftdi_usb.h"
#include "nim.h"
#include "errors.h"
/* -------------------------------------------------------------------------------------------------- */
/* ----------------- DEFINES ------------------------------------------------------------------------ */
/* -------------------------------------------------------------------------------------------------- */
#define FTDI_VID 0x0403
#define FTDI_PID 0x6010
#define FTDI_NUM_TRIES 10
#define FTDI_STOP_START_REPEATS 4
#define FTDI_RDWR_TIMEOUT 100
#define MSB_FALLING_EDGE_CLOCK_BYTE_IN 0x24
#define MSB_FALLING_EDGE_CLOCK_BYTE_OUT 0x11
#define MSB_RISING_EDGE_CLOCK_BIT_IN 0x22
#define MSB_FAILING_EDGE_CLOCK_BIT_IN 0x26
/*
FTDI GPIO Pins
LSB
- AC0: NIM Reset
- AC1: TS2SYNC
- AC2: <unused>
- AC3: <unused>
- AC4: LNB Bias Enable
- AC5: <unused>
- AC6: <unused>
- AC7: LNB Bias Voltage Select
MSB
*/
#define FTDI_GPIO_PINID_NIM_RESET 0
#define FTDI_GPIO_PINID_TS2SYNC 1
#define FTDI_GPIO_PINID_LNB_BIAS_ENABLE 4
#define FTDI_GPIO_PINID_LNB_BIAS_VSEL 7
/* -------------------------------------------------------------------------------------------------- */
/* ----------------- GLOBALS ------------------------------------------------------------------------ */
/* -------------------------------------------------------------------------------------------------- */
static int num_bytes_to_send = 0;
static uint8_t out_buffer[256];
/* Default GPIO value 0x6f = 0b01101111 = LNB Bias Off, LNB Voltage 12V, NIM not reset */
static uint8_t ftdi_gpio_value = 0x6f;
/* Default GPIO direction 0xf1 = 0b11110001 = LNB pins, NIM Reset are outputs, TS2SYNC is input (0 for in and 1 for out) */
static uint8_t ftdi_gpio_direction = 0xf1;
/* -------------------------------------------------------------------------------------------------- */
/* ----------------- ROUTINES ----------------------------------------------------------------------- */
/* -------------------------------------------------------------------------------------------------- */
/* -------------------------------------------------------------------------------------------------- */
uint8_t ftdi_setup_ftdi_io(void){
/* -------------------------------------------------------------------------------------------------- */
/* sets up the IO stages of the FTDI and syncs the comms */
/* return: error code */
/* -------------------------------------------------------------------------------------------------- */
uint8_t err=ERROR_NONE;
uint8_t *in_buffer;
uint8_t old_in_buffer=0;
int i;
int clock_divisor = 0x0095;
printf("Flow: FTDI setup io\n");
/* note we don't accumulate errors for this bit as we are trying to sync */
/* first we send out a byte to act as our sync */
num_bytes_to_send = 0;
out_buffer[num_bytes_to_send++] = 0xAA;
if (err==ERROR_NONE) ftdi_usb_i2c_write(out_buffer, num_bytes_to_send);
num_bytes_to_send = 0;
/* next we keep reading it until we get it back, and the reply before it */
for (i=0; i<FTDI_NUM_TRIES; i++) {
if (err==ERROR_NONE) ftdi_usb_i2c_read(&in_buffer);
if ((old_in_buffer==0xFA) && (*in_buffer==0xAA)) {
printf(" Status: MPSSE Synched ");
printf("%.2X %.2X\n",*in_buffer,old_in_buffer);
break;
}
old_in_buffer = *in_buffer;
}
out_buffer[num_bytes_to_send++]=0x8A;
out_buffer[num_bytes_to_send++]=0x97;
out_buffer[num_bytes_to_send++]=0x8D;
if (err==ERROR_NONE) err=ftdi_usb_i2c_write(out_buffer, num_bytes_to_send);
num_bytes_to_send = 0;
out_buffer[num_bytes_to_send++]=0x80;
out_buffer[num_bytes_to_send++]=0x13;
out_buffer[num_bytes_to_send++]=0x13;
out_buffer[num_bytes_to_send++]=0x82;
out_buffer[num_bytes_to_send++]=0x6f;
out_buffer[num_bytes_to_send++]=0xf1;
out_buffer[num_bytes_to_send++] = 0x86;
out_buffer[num_bytes_to_send++] = clock_divisor & 0xFF;
out_buffer[num_bytes_to_send++] = (clock_divisor >> 8) & 0xFF;
if (err==ERROR_NONE) err=ftdi_usb_i2c_write(out_buffer, num_bytes_to_send);
num_bytes_to_send = 0;
usleep(30000);
out_buffer[num_bytes_to_send++] = 0x85;
if (err==ERROR_NONE) err=ftdi_usb_i2c_write(out_buffer, num_bytes_to_send);
num_bytes_to_send = 0;
/* need to wait a while for it to work */
usleep(30000);
if (err!=ERROR_NONE) printf("ERROR: set mpsse mode\n");
return err;
}
/* -------------------------------------------------------------------------------------------------- */
uint8_t ftdi_i2c_set_start(void) {
/* -------------------------------------------------------------------------------------------------- */
/* sets the i2c start condition on the i2c bus */
/* return: error code */
/* -------------------------------------------------------------------------------------------------- */
int count;
for (count=0; count<FTDI_STOP_START_REPEATS; count++) {
out_buffer[num_bytes_to_send++] = 0x80;
out_buffer[num_bytes_to_send++] = 0x03;
out_buffer[num_bytes_to_send++] = 0x13;
}
for (count=0; count<FTDI_STOP_START_REPEATS; count++) {
out_buffer[num_bytes_to_send++] = 0x80;
out_buffer[num_bytes_to_send++] = 0x01;
out_buffer[num_bytes_to_send++] = 0x13;
}
/* note we don't send this out yet as there will be more */
return ERROR_NONE;
}
/* -------------------------------------------------------------------------------------------------- */
uint8_t ftdi_i2c_set_stop(void) {
/* -------------------------------------------------------------------------------------------------- */
/* sets the i2c stop condition on the i2c bus */
/* return: error code */
/* -------------------------------------------------------------------------------------------------- */
int count;
for (count=0; count<FTDI_STOP_START_REPEATS; count++) {
out_buffer[num_bytes_to_send++] = 0x80;
out_buffer[num_bytes_to_send++] = 0x01;
out_buffer[num_bytes_to_send++] = 0x13;
}
for (count=0; count<FTDI_STOP_START_REPEATS; count++) {
out_buffer[num_bytes_to_send++] = 0x80;
out_buffer[num_bytes_to_send++] = 0x03;
out_buffer[num_bytes_to_send++] = 0x13;
}
out_buffer[num_bytes_to_send++] = 0x80;
out_buffer[num_bytes_to_send++] = 0x03;
out_buffer[num_bytes_to_send++] = 0x10;
/* note we don't send this out yet as there will be more */
return ERROR_NONE;
}
/* -------------------------------------------------------------------------------------------------- */
uint8_t ftdi_i2c_send_byte_check_ack(uint8_t b)
/* -------------------------------------------------------------------------------------------------- */
/* writes a byte to the i2c bus and checks we get an ack */
/* b: the byte to write out */
/* return: error code */
/* -------------------------------------------------------------------------------------------------- */
{
uint8_t *in_buffer;
uint8_t err;
out_buffer[num_bytes_to_send++] = 0x80;
out_buffer[num_bytes_to_send++] = 0x00;
out_buffer[num_bytes_to_send++] = 0x13;
out_buffer[num_bytes_to_send++] = 0x11;
out_buffer[num_bytes_to_send++] = 0x00;
out_buffer[num_bytes_to_send++] = 0x00; /* Data length of 0x0000 means clock out 1 byte */
out_buffer[num_bytes_to_send++] = b; /* Actual byte to clock out */
out_buffer[num_bytes_to_send++] = 0x80;
out_buffer[num_bytes_to_send++] = 0x00;
out_buffer[num_bytes_to_send++] = 0x11;
out_buffer[num_bytes_to_send++] = 0x27;
out_buffer[num_bytes_to_send++] = 0x00;
out_buffer[num_bytes_to_send++] = 0x87;
err=ftdi_usb_i2c_write(out_buffer, num_bytes_to_send);
num_bytes_to_send = 0;
if (err==ERROR_NONE) err=ftdi_usb_i2c_read(&in_buffer);
if ((err==ERROR_NONE) && ((*in_buffer&0x01)!=0)) {
err=ERROR_I2C_NO_ACK;
}
return err;
}
/* -------------------------------------------------------------------------------------------------- */
int ftdi_i2c_read_byte_send_nak(uint8_t *b ) {
/* -------------------------------------------------------------------------------------------------- */
/* reads a byte from the i2c bus */
/* *b: a byte to return the read value in */
/* return: error code */
/* -------------------------------------------------------------------------------------------------- */
uint8_t err;
uint8_t *in_buffer;
/* first send off the commands to do the read */
out_buffer[num_bytes_to_send++] = 0x80;
out_buffer[num_bytes_to_send++] = 0x00;
out_buffer[num_bytes_to_send++] = 0x13;
out_buffer[num_bytes_to_send++] = 0x80;
out_buffer[num_bytes_to_send++] = 0x00;
out_buffer[num_bytes_to_send++] = 0x11;
out_buffer[num_bytes_to_send++] = 0x25;
out_buffer[num_bytes_to_send++] = 0x00;
out_buffer[num_bytes_to_send++] = 0x00;
out_buffer[num_bytes_to_send++] = 0x87;
err=ftdi_usb_i2c_write(out_buffer, num_bytes_to_send);
num_bytes_to_send = 0;
/* now read the value back */
if (err==ERROR_NONE) err=ftdi_usb_i2c_read(&in_buffer);
*b = *in_buffer;
return err;
}
/* -------------------------------------------------------------------------------------------------- */
uint8_t ftdi_i2c_output(void) {
/* -------------------------------------------------------------------------------------------------- */
/* once other routines have set up a sequence of bytes to write, this actually sends them */
/* return: error code */
/* -------------------------------------------------------------------------------------------------- */
uint8_t err;
err=ftdi_usb_i2c_write(out_buffer, num_bytes_to_send);
num_bytes_to_send = 0;
return err;
}
/* -------------------------------------------------------------------------------------------------- */
uint8_t ftdi_i2c_read_reg16(uint8_t addr, uint16_t reg, uint8_t *val) {
/* -------------------------------------------------------------------------------------------------- */
/* read an i2c 16 bit register from the nim */
/* addr: the i2c buser address to access */
/* reg: the i2c register to read */
/* *val: the return value for the register we have read */
/* return: error code */
/* -------------------------------------------------------------------------------------------------- */
int err;
int i;
int timeout=0;
do {
/* Send the register that needs to be read */
for(i=0; i<FTDI_NUM_TRIES; i++) {
err =ftdi_i2c_set_start();
err|=ftdi_i2c_send_byte_check_ack(addr);
err|=ftdi_i2c_send_byte_check_ack(reg>>8);
err|=ftdi_i2c_send_byte_check_ack(reg&0xff);
if (err==ERROR_NONE) break;
}
if (err==ERROR_NONE) {
/* Read back the contents of that register */
for(i=0; i<FTDI_NUM_TRIES; i++) {
err =ftdi_i2c_set_start();
err|=ftdi_i2c_send_byte_check_ack(addr|0x01);
err|=ftdi_i2c_read_byte_send_nak(val);
err|=ftdi_i2c_set_stop();
err|=ftdi_i2c_output();
if (err==ERROR_NONE) break;
}
}
timeout++;
} while ((err!=ERROR_NONE) && (timeout!=FTDI_RDWR_TIMEOUT));
if (err!=ERROR_NONE) printf("ERROR: i2c read reg16 0x%.2x, 0x%.4x\n",addr,reg);
return err;
}
/* -------------------------------------------------------------------------------------------------- */
uint8_t ftdi_i2c_write_reg16(uint8_t addr, uint16_t reg, uint8_t val) {
/* -------------------------------------------------------------------------------------------------- */
/* write an 8 bit value into a 16 bit i2c register */
/* addr: the i2c bus address to access */
/* reg: the i2c register to write to */
/* val: the value to write into the register */
/* return: error code */
/* -------------------------------------------------------------------------------------------------- */
int err;
int i;
int timeout=0;
do {
for (i=0; i<FTDI_NUM_TRIES; i++) {
err =ftdi_i2c_set_start();
err|=ftdi_i2c_send_byte_check_ack(addr);
err|=ftdi_i2c_send_byte_check_ack(reg>>8);
err|=ftdi_i2c_send_byte_check_ack(reg&0xff);
err|=ftdi_i2c_send_byte_check_ack(val);
err|=ftdi_i2c_set_stop();
err|=ftdi_i2c_output();
if (err==ERROR_NONE) break;
}
timeout++;
} while ((err!=ERROR_NONE) && (timeout!=FTDI_RDWR_TIMEOUT));
if (err!=ERROR_NONE) printf("ERROR: i2c write reg16 0x%.2x, 0x%.4x, 0x%.2x\n",addr,reg, val);
return err;
}
/* -------------------------------------------------------------------------------------------------- */
uint8_t ftdi_i2c_read_reg8(uint8_t addr, uint8_t reg, uint8_t *val) {
/* -------------------------------------------------------------------------------------------------- */
/* read an i2c 8 bit register from the nim */
/* addr: the i2c bus address to access */
/* reg: the i2c register to read */
/* *val: the return value for the register we have read */
/* return: error code */
/* -------------------------------------------------------------------------------------------------- */
uint8_t err;
int i;
int timeout=0;
do {
for (i=0; i<FTDI_NUM_TRIES; i++) {
err =ftdi_i2c_set_start();
err|=ftdi_i2c_send_byte_check_ack(addr);
err|=ftdi_i2c_send_byte_check_ack(reg);
err|=ftdi_i2c_set_stop();
err|=ftdi_i2c_output();
if (err==ERROR_NONE) break;
}
if (err==ERROR_NONE) {
for (i=0; i<FTDI_NUM_TRIES; i++) {
err =ftdi_i2c_set_start();
err|=ftdi_i2c_send_byte_check_ack(addr|0x01);
err|=ftdi_i2c_read_byte_send_nak(val);
err|=ftdi_i2c_set_stop();
err|=ftdi_i2c_output();
if (err==ERROR_NONE) break;
}
}
timeout++;
} while ((err!=ERROR_NONE) && (timeout!=FTDI_RDWR_TIMEOUT));
if (err!=ERROR_NONE) printf("ERROR: i2c read reg8 0x%.2x, 0x%.2x\n",addr,reg);
return err;
}
/* -------------------------------------------------------------------------------------------------- */
uint8_t ftdi_i2c_write_reg8(uint8_t addr, uint8_t reg, uint8_t val) {
/* -------------------------------------------------------------------------------------------------- */
/* write an 8 bit value to an i2c 8 bit register in the nim */
/* addr: the i2c bus address to access */
/* reg: the i2c register to write to */
/* val: the value to write into the register */
/* return: error code */
/* -------------------------------------------------------------------------------------------------- */
int err;
int i;
int timeout=0;
do {
for (i=0; i<FTDI_NUM_TRIES; i++) {
err =ftdi_i2c_set_start();
err|=ftdi_i2c_send_byte_check_ack(addr);
err|=ftdi_i2c_send_byte_check_ack(reg);
err|=ftdi_i2c_send_byte_check_ack(val);
err|=ftdi_i2c_set_stop();
err|=ftdi_i2c_output();
if (err==ERROR_NONE) break;
}
timeout++;
} while ((err!=ERROR_NONE) && (timeout!=FTDI_RDWR_TIMEOUT));
if (err!=ERROR_NONE) printf("ERROR: i2c_write reg8 0x%.2x, 0x%.2x, 0x%.2x\n",addr,reg,val);
return err;
}
/* -------------------------------------------------------------------------------------------------- */
uint8_t ftdi_gpio_write(uint8_t pin_id, bool pin_value)
/* -------------------------------------------------------------------------------------------------- */
/* write pin_value to the FTDI GPIO pin AC<pin_id> */
/* -------------------------------------------------------------------------------------------------- */
{
printf("Flow: FTDI GPIO Write: pin %d -> value %d\n", pin_id, (int)pin_value);
if(pin_value)
{
ftdi_gpio_value |= (1 << pin_id);
}
else
{
ftdi_gpio_value &= ~(1 << pin_id);
}
num_bytes_to_send = 0;
out_buffer[num_bytes_to_send++] = 0x82; /* aka. MPSSE_CMD_SET_DATA_BITS_HIGHBYTE */
out_buffer[num_bytes_to_send++] = ftdi_gpio_value;
out_buffer[num_bytes_to_send++] = ftdi_gpio_direction;
ftdi_usb_i2c_write(out_buffer, num_bytes_to_send);
num_bytes_to_send = 0;
return ERROR_NONE;
}
/* -------------------------------------------------------------------------------------------------- */
uint8_t ftdi_nim_reset(void)
/* -------------------------------------------------------------------------------------------------- */
/* toggle the reset line on the nim */
/* -------------------------------------------------------------------------------------------------- */
{
printf("Flow: FTDI nim reset\n");
ftdi_gpio_write(FTDI_GPIO_PINID_NIM_RESET, 0);
usleep(10000);
ftdi_gpio_write(FTDI_GPIO_PINID_NIM_RESET, 1);
usleep(10000);
return ERROR_NONE;
}
/* -------------------------------------------------------------------------------------------------- */
uint8_t ftdi_set_polarisation_supply(bool supply_enable, bool supply_horizontal)
/* -------------------------------------------------------------------------------------------------- */
/* Controls RT5047A LNB Power Supply IC, fitted to an additional board. */
/* -------------------------------------------------------------------------------------------------- */
{
if(supply_enable) {
/* Set Voltage */
if(supply_horizontal) {
ftdi_gpio_write(FTDI_GPIO_PINID_LNB_BIAS_VSEL, 1);
}
else {
ftdi_gpio_write(FTDI_GPIO_PINID_LNB_BIAS_VSEL, 0);
}
/* Then enable output */
ftdi_gpio_write(FTDI_GPIO_PINID_LNB_BIAS_ENABLE, 1);
}
else {
/* Disable output */
ftdi_gpio_write(FTDI_GPIO_PINID_LNB_BIAS_ENABLE, 0);
}
return ERROR_NONE;
}
/* -------------------------------------------------------------------------------------------------- */
uint8_t ftdi_init(uint8_t usb_bus, uint8_t usb_addr) {
/* -------------------------------------------------------------------------------------------------- */
/* initialises the ftdi module on the minitiouner */
/* -------------------------------------------------------------------------------------------------- */
uint8_t err;
printf("Flow: FTDI init\n");
err=ftdi_usb_init_i2c(usb_bus, usb_addr, FTDI_VID, FTDI_PID);
if (err==ERROR_NONE) err=ftdi_usb_set_mpsse_mode_i2c();
if (err==ERROR_NONE) err=ftdi_usb_init_ts(usb_bus, usb_addr, FTDI_VID, FTDI_PID);
if (err==ERROR_NONE) err=ftdi_usb_set_mpsse_mode_ts();
if (err==ERROR_NONE) err=ftdi_setup_ftdi_io();
if (err==ERROR_NONE) err=ftdi_nim_reset();
if (err!=ERROR_NONE) printf("ERROR: FTDI init\n");
return err;
}