first commit

2022-08-24 07:59:16 +02:00
commit adfe5792c4
259 changed files with 77719 additions and 0 deletions
@@ -0,0 +1,100 @@
+/* Arduino terminal for PL2303 USB to serial converter and DealeXtreme GPRS modem. */
+/* USB support */
+#include <usbhub.h>
+/* CDC support */
+#include <cdcacm.h>
+#include <cdcprolific.h>
+// Satisfy IDE, which only needs to see the include statment in the ino.
+#ifdef dobogusinclude
+#include <spi4teensy3.h>
+#include <SPI.h>
+#endif
+
+class PLAsyncOper : public CDCAsyncOper
+{
+public:
+    uint8_t OnInit(ACM *pacm);
+};
+
+uint8_t PLAsyncOper::OnInit(ACM *pacm)
+{
+    uint8_t rcode;
+
+    // Set DTR = 1
+    rcode = pacm->SetControlLineState(1);
+
+    if (rcode)
+    {
+        ErrorMessage<uint8_t>(PSTR("SetControlLineState"), rcode);
+        return rcode;
+    }
+
+    LINE_CODING	lc;
+    //lc.dwDTERate	= 9600;
+    lc.dwDTERate = 115200;
+    lc.bCharFormat	= 0;
+    lc.bParityType	= 0;
+    lc.bDataBits	= 8;
+
+    rcode = pacm->SetLineCoding(&lc);
+
+    if (rcode)
+        ErrorMessage<uint8_t>(PSTR("SetLineCoding"), rcode);
+
+    return rcode;
+}
+USB     Usb;
+//USBHub     Hub(&Usb);
+PLAsyncOper  AsyncOper;
+PL2303       Pl(&Usb, &AsyncOper);
+
+void setup()
+{
+  Serial.begin( 115200 );
+#if !defined(__MIPSEL__)
+  while (!Serial); // Wait for serial port to connect - used on Leonardo, Teensy and other boards with built-in USB CDC serial connection
+#endif
+  Serial.println("Start");
+
+  if (Usb.Init() == -1)
+      Serial.println("OSCOKIRQ failed to assert");
+
+  delay( 200 );
+}
+
+void loop()
+{
+    Usb.Task();
+
+    if( Usb.getUsbTaskState() == USB_STATE_RUNNING )
+    {
+       uint8_t rcode;
+
+       /* reading the keyboard */
+       if(Serial.available()) {
+         uint8_t data= Serial.read();
+
+         /* sending to the phone */
+         rcode = Pl.SndData(1, &data);
+         if (rcode)
+            ErrorMessage<uint8_t>(PSTR("SndData"), rcode);
+       }//if(Serial.available()...
+
+        /* reading the converter */
+        /* buffer size must be greater or equal to max.packet size */
+        /* it it set to 64 (largest possible max.packet size) here, can be tuned down
+        for particular endpoint */
+        uint8_t  buf[64];
+        uint16_t rcvd = 64;
+        rcode = Pl.RcvData(&rcvd, buf);
+         if (rcode && rcode != hrNAK)
+           ErrorMessage<uint8_t>(PSTR("Ret"), rcode);
+
+           if( rcvd ) { //more than zero bytes received
+             for(uint16_t i=0; i < rcvd; i++ ) {
+               Serial.print((char)buf[i]); //printing on the screen
+             }
+           }//if( rcvd ...
+    }//if( Usb.getUsbTaskState() == USB_STATE_RUNNING..
+}
+