653 lines
27 KiB
C
Executable File
653 lines
27 KiB
C
Executable File
|
|
// ######## ######## ###### ########
|
|
// ## ## ## ## ##
|
|
// ## ## ## ##
|
|
// ## ###### ###### ##
|
|
// ## ## ## ##
|
|
// ## ## ## ## ##
|
|
// ## ######## ###### ##
|
|
|
|
#define TEST_SETTINGS_1
|
|
// #define TEST_SETTINGS_2
|
|
|
|
#if defined(TEST_SETTINGS_1)
|
|
|
|
#define initial_speed_wpm 26 // "factory default" keyer speed setting
|
|
#define initial_command_mode_speed_wpm 20 // "factory default" command mode speed setting
|
|
#define initial_sidetone_freq 600 // "factory default" sidetone frequency setting
|
|
#define sidetone_hz_limit_low 299
|
|
#define sidetone_hz_limit_high 2001
|
|
#define hz_high_beep 1500 // frequency in hertz of high beep
|
|
#define hz_low_beep 400 // frequency in hertz of low beep
|
|
#define initial_dah_to_dit_ratio 300 // 300 = 3 / normal 3:1 ratio
|
|
#define initial_ptt_lead_time_tx1 0 // PTT lead time in mS
|
|
#define initial_ptt_tail_time_tx1 10 // PTT tail time in mS
|
|
#define initial_ptt_lead_time_tx2 0 // PTT lead time in mS
|
|
#define initial_ptt_tail_time_tx2 10 // PTT tail time in mS
|
|
#define initial_ptt_lead_time_tx3 0 // PTT lead time in mS
|
|
#define initial_ptt_tail_time_tx3 10 // PTT tail time in mS
|
|
#define initial_ptt_lead_time_tx4 0 // PTT lead time in mS
|
|
#define initial_ptt_tail_time_tx4 10 // PTT tail time in mS
|
|
#define initial_ptt_lead_time_tx5 0 // PTT lead time in mS
|
|
#define initial_ptt_tail_time_tx5 10 // PTT tail time in mS
|
|
#define initial_ptt_lead_time_tx6 0 // PTT lead time in mS
|
|
#define initial_ptt_tail_time_tx6 10 // PTT tail time in mS
|
|
#define initial_qrss_dit_length 1 // QRSS dit length in seconds
|
|
#define initial_pot_wpm_low_value 13 // Potentiometer WPM fully CCW
|
|
#define initial_pot_wpm_high_value 35 // Potentiometer WPM fully CW
|
|
#define wpm_limit_low 5
|
|
#define wpm_limit_high 60
|
|
#define potentiometer_change_threshold 0.9 // don't change the keyer speed until pot wpm has changed more than this
|
|
#define send_buffer_size 150
|
|
#define default_length_letterspace 3
|
|
#define default_length_wordspace 7
|
|
#define default_keying_compensation 0 // number of milliseconds to extend all dits and dahs - for QSK on boatanchors
|
|
#define default_first_extension_time 0 // number of milliseconds to extend first sent dit or dah
|
|
#define default_pot_full_scale_reading 1023
|
|
#define default_weighting 50 // 50 = weighting factor of 1 (normal)
|
|
#define default_ptt_hang_time_wordspace_units 0.0
|
|
#define winkey_c0_wait_time 1 // the number of milliseconds to wait to send 0xc0 byte after send buffer has been sent
|
|
#define winkey_command_timeout_ms 5000
|
|
#define winkey_discard_bytes_startup 3 // this is used if OPTION_WINKEY_DISCARD_BYTES_AT_STARTUP is enabled above
|
|
#define winkey_xoff_threshold 20 // the number of chars in the buffer when we begin sending XOFFs
|
|
#define winkey_xon_threshold 10 // the number of chars in the buffer below which we deactivate XOFF
|
|
#define default_memory_repeat_time 3000 // time in milliseconds
|
|
#define LCD_COLUMNS 16
|
|
#define LCD_ROWS 2
|
|
#define lcd_i2c_address_mathertel_PCF8574 0x27 // I2C address of display for FEATURE_LCD_MATHERTEL_PCF8574
|
|
#define lcd_i2c_address_fdebrander_lcd 0x27 // I2C address of display for FEATURE_LCD_I2C_FDEBRABANDER
|
|
#define lcd_i2c_address_ydv1_lcd 0x27 // I2C address of display for FEATURE_LCD_YDv1
|
|
//#define lcd_i2c_address_ydv1_lcd 0x38 // I2C address of display for FEATURE_LCD_YDv1
|
|
#define lcd_i2c_address_sainsmart_lcd 0x27 // I2C address of display for FEATURE_LCD_SAINSMART_I2C
|
|
#define hell_pixel_microseconds 4025
|
|
#define program_memory_limit_consec_spaces 1
|
|
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
|
|
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
|
|
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
|
|
#define dim_backlight_inactive_time 5 // minutes - FEATURE_LCD_BACKLIGHT_AUTO_DIM
|
|
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
|
|
#define default_cw_echo_timing_factor 1.75 // "factory default" setting
|
|
#define default_autospace_timing_factor 2.0 // "factory default" setting
|
|
#define winkey_paddle_echo_buffer_decode_timing_factor 0.25
|
|
#define potentiometer_always_on 0
|
|
#define ptt_interlock_check_every_ms 100
|
|
#define ptt_interlock_active_state HIGH
|
|
#define unknown_cw_character '*'
|
|
#define cli_paddle_echo_on_at_boot 1
|
|
#define cli_straight_key_echo_on_at_boot 1
|
|
#define tx_key_dit_and_dah_pins_active_state LOW
|
|
#define tx_key_dit_and_dah_pins_inactive_state HIGH
|
|
#define potentiometer_check_interval_ms 150
|
|
#define potentiometer_reading_threshold 1
|
|
#define default_paddle_interruption_quiet_time_element_lengths 0
|
|
#define default_wordsworth_wordspace 6
|
|
#define default_wordsworth_repetition 1
|
|
#define serial_program_memory_buffer_size 500
|
|
#define eeprom_write_time_ms 30000
|
|
|
|
#ifdef FEATURE_BUTTONS
|
|
#define analog_buttons_number_of_buttons 4
|
|
#define analog_buttons_r1 10
|
|
#define analog_buttons_r2 1
|
|
#endif
|
|
|
|
|
|
#if defined(FEATURE_BUTTONS) && !defined(FEATURE_PS2_KEYBOARD) && !defined(FEATURE_USB_KEYBOARD) && !defined(FEATURE_COMMAND_LINE_INTERFACE) && !defined(FEATURE_WINKEY_EMULATION)
|
|
#define number_of_memories byte(analog_buttons_number_of_buttons-1)
|
|
#else
|
|
#define number_of_memories byte(12)
|
|
#endif
|
|
|
|
#ifdef FEATURE_CAPACITIVE_PADDLE_PINS
|
|
#define capacitance_threshold 2
|
|
#endif //FEATURE_CAPACITIVE_PADDLE_PINS
|
|
|
|
#ifdef FEATURE_LED_RING
|
|
#define led_ring_low_limit 10
|
|
#define led_ring_high_limit 50
|
|
#endif //FEATURE_LED_RING
|
|
|
|
#ifdef FEATURE_QLF
|
|
#define qlf_dit_max 125
|
|
#define qlf_dit_min 75
|
|
#define qlf_dah_max 200
|
|
#define qlf_dah_min 100
|
|
#define qlf_on_by_default 0
|
|
#endif //FEATURE_QLF
|
|
|
|
|
|
#ifdef FEATURE_WINKEY_EMULATION
|
|
#ifdef OPTION_WINKEY_UCXLOG_9600_BAUD
|
|
#define WINKEY_DEFAULT_BAUD 9600
|
|
#else
|
|
#define WINKEY_DEFAULT_BAUD 1200
|
|
#endif //OPTION_WINKEY_UCXLOG_9600_BAUD
|
|
// alter these below to map alternate sidetones for Winkey interface protocol emulation
|
|
#ifdef OPTION_WINKEY_2_SUPPORT
|
|
#define WINKEY_SIDETONE_1 3759
|
|
#define WINKEY_SIDETONE_2 1879
|
|
#define WINKEY_SIDETONE_3 1252
|
|
#define WINKEY_SIDETONE_4 940
|
|
#define WINKEY_SIDETONE_5 752
|
|
#define WINKEY_SIDETONE_6 625
|
|
#define WINKEY_SIDETONE_7 535
|
|
#define WINKEY_SIDETONE_8 469
|
|
#define WINKEY_SIDETONE_9 417
|
|
#define WINKEY_SIDETONE_10 375
|
|
#else //OPTION_WINKEY_2_SUPPORT
|
|
#define WINKEY_SIDETONE_1 4000
|
|
#define WINKEY_SIDETONE_2 2000
|
|
#define WINKEY_SIDETONE_3 1333
|
|
#define WINKEY_SIDETONE_4 1000
|
|
#define WINKEY_SIDETONE_5 800
|
|
#define WINKEY_SIDETONE_6 666
|
|
#define WINKEY_SIDETONE_7 571
|
|
#define WINKEY_SIDETONE_8 500
|
|
#define WINKEY_SIDETONE_9 444
|
|
#define WINKEY_SIDETONE_10 400
|
|
#endif //OPTION_WINKEY_2_SUPPORT
|
|
|
|
#define WINKEY_1_REPORT_VERSION_NUMBER 10
|
|
#define WINKEY_2_REPORT_VERSION_NUMBER 23
|
|
|
|
// alter these to map to alternate hang time wordspace units
|
|
#define WINKEY_HANG_TIME_1_0 1.0
|
|
#define WINKEY_HANG_TIME_1_33 1.33
|
|
#define WINKEY_HANG_TIME_1_66 1.66
|
|
#define WINKEY_HANG_TIME_2_0 2.0
|
|
|
|
#define WINKEY_RETURN_THIS_FOR_ADMIN_GET_CAL 0x16
|
|
#define WINKEY_RETURN_THIS_FOR_ADMIN_PADDLE_A2D 0xEE
|
|
#define WINKEY_RETURN_THIS_FOR_ADMIN_SPEED_A2D 0x00
|
|
|
|
#endif //FEATURE_WINKEY_EMULATION
|
|
|
|
|
|
#define PRIMARY_SERIAL_PORT &Serial
|
|
#define PRIMARY_SERIAL_PORT_BAUD 115200 // This applies only when the port is in Command Line Interface mode. In Winkey mode it will default to 1200.
|
|
|
|
#ifdef FEATURE_COMMAND_LINE_INTERFACE_ON_SECONDARY_PORT
|
|
#define SECONDARY_SERIAL_PORT &Serial1
|
|
#define SECONDARY_SERIAL_PORT_BAUD 115200
|
|
#endif
|
|
|
|
|
|
#define CW_DECODER_SCREEN_COLUMNS 120 // word wrap at this many columns
|
|
#define CW_DECODER_SPACE_PRINT_THRESH 4.5 // print space if no tone for this many element lengths
|
|
#define CW_DECODER_SPACE_DECODE_THRESH 2.0 // invoke character decode if no tone for this many element lengths
|
|
#define CW_DECODER_NOISE_FILTER 20 // ignore elements shorter than this (mS)
|
|
|
|
#define STRAIGHT_KEY_ACTIVE_STATE LOW
|
|
|
|
#ifdef FEATURE_DYNAMIC_DAH_TO_DIT_RATIO
|
|
#define DYNAMIC_DAH_TO_DIT_RATIO_LOWER_LIMIT_WPM 30
|
|
#define DYNAMIC_DAH_TO_DIT_RATIO_LOWER_LIMIT_RATIO 300 // 300 = 3:1 ratio
|
|
#define DYNAMIC_DAH_TO_DIT_RATIO_UPPER_LIMIT_WPM 70
|
|
#define DYNAMIC_DAH_TO_DIT_RATIO_UPPER_LIMIT_RATIO 240 // 240 = 2.4:1 ratio
|
|
#endif //FEATURE_DYNAMIC_DAH_TO_DIT_RATIO
|
|
|
|
#if defined(FEATURE_COMPETITION_COMPRESSION_DETECTION)
|
|
#define COMPETITION_COMPRESSION_DETECTION_ARRAY_SIZE 16
|
|
#define COMPETITION_COMPRESSION_DETECTION_TIME_INTERCHAR_LOWER_LIMIT 1
|
|
#define COMPETITION_COMPRESSION_DETECTION_TIME_INTERCHAR_UPPER_LIMIT 6.0
|
|
#define COMPETITION_COMPRESSION_DETECTION_AVERAGE_ALARM_THRESHOLD 3.0
|
|
#endif //FEATURE_COMPETITION_COMPRESSION_DETECTION
|
|
|
|
#if defined(FEATURE_SLEEP)
|
|
#define KEYER_AWAKE_PIN_AWAKE_STATE HIGH
|
|
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
|
|
#endif
|
|
|
|
#if defined(FEATURE_LCD_BACKLIGHT_AUTO_DIM)
|
|
#define keyer_power_led_awake_duty 255 // PWM duty cycle. 0 is 0%, 255 is 100%
|
|
#define keyer_power_led_asleep_duty 25 // 25 is quite dim. Use 0 for off
|
|
#endif
|
|
|
|
#if defined(FEATURE_ETHERNET)
|
|
#define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
|
|
#define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}
|
|
#define FEATURE_ETHERNET_DNS {8,8,8,8}
|
|
// #define FEATURE_ETHERNET_IP {192,168,1,179} // default IP address ("192.168.1.179")
|
|
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xEE}
|
|
|
|
#define FEATURE_ETHERNET_GATEWAY {192,168,1,1} // default gateway
|
|
#define FEATURE_ETHERNET_SUBNET_MASK {255,255,255,0} // default subnet mask
|
|
#define FEATURE_ETHERNET_WEB_LISTENER_PORT 80
|
|
#define FEATURE_UDP_SEND_BUFFER_SIZE 128
|
|
#define FEATURE_UDP_RECEIVE_BUFFER_SIZE 128
|
|
#endif //FEATURE_ETHERNET
|
|
|
|
#define FEATURE_INTERNET_LINK_MAX_LINKS 2
|
|
#define FEATURE_INTERNET_LINK_DEFAULT_RCV_UDP_PORT 8888
|
|
#define FEATURE_INTERNET_LINK_BUFFER_TIME_MS 500 // increase this time if you have greater than 500 ms latency on your link
|
|
#define FEATURE_INTERNET_LINK_SVC_DURING_LOOP_TIME_MS 20
|
|
#define FEATURE_INTERNET_LINK_KEY_DOWN_TIMEOUT_SECS 8
|
|
|
|
#define WEB_SERVER_CONTROL_TX_KEY_TIME_LIMIT_SECS 10
|
|
|
|
#if defined(FEATURE_4x4_KEYPAD)|| defined (FEATURE_3x4_KEYPAD)
|
|
#define KEYPAD_ROWS 4 //KeyPad Rows
|
|
#if defined(FEATURE_4x4_KEYPAD)
|
|
#define KEYPAD_COLS 4 //keypad Columns
|
|
#else
|
|
#define KEYPAD_COLS 3
|
|
#endif
|
|
#define mem1 0 //Memory numbers for Keypad: Actual memory numbers start with "0"
|
|
#define mem2 1
|
|
#define mem3 2
|
|
#define mem4 3
|
|
#define mem5 4
|
|
#define mem6 5
|
|
#define mem7 6
|
|
#define mem8 7
|
|
#define mem9 8
|
|
#define mem10 9
|
|
#define mem11 10
|
|
#define mem12 11
|
|
#endif //#if defined(FEATURE_4x4_KEYPAD)|| defined (FEATURE_3x4_KEYPAD)
|
|
|
|
#define initial_sidetone_mode 1 // Sidetone mode, 0=OFF, 1=ON, 2=PADDLE_ONLY
|
|
|
|
#define sd_card_spi_ss_line 4
|
|
|
|
|
|
#if defined(OPTION_DFROBOT_LCD_COMMAND_BUTTONS)
|
|
|
|
// For V1.1 board use these values
|
|
#define dfrobot_btnRIGHT_analog 50
|
|
#define dfrobot_btnUP_analog 250
|
|
#define dfrobot_btnDOWN_analog 450
|
|
#define dfrobot_btnLEFT_analog 650
|
|
#define dfrobot_btnSELECT_analog 850
|
|
|
|
// For V1.0 board use these values
|
|
// #define dfrobot_btnRIGHT_analog 50
|
|
// #define dfrobot_btnUP_analog 195
|
|
// #define dfrobot_btnDOWN_analog 380
|
|
// #define dfrobot_btnLEFT_analog 555
|
|
// #define dfrobot_btnSELECT_analog 790
|
|
|
|
// button to memory mappings (0 = command button, 1 = memory 1, 2 = memory 2, etc.)
|
|
#define dfrobot_btnRIGHT 2
|
|
#define dfrobot_btnUP 1
|
|
#define dfrobot_btnDOWN 3
|
|
#define dfrobot_btnLEFT 4
|
|
#define dfrobot_btnSELECT 0
|
|
#define dfrobot_btnNONE 255 // do not change
|
|
|
|
#endif
|
|
|
|
|
|
#define sequencer_pins_active_state HIGH
|
|
#define sequencer_pins_inactive_state LOW
|
|
#define ptt_line_active_state HIGH
|
|
#define ptt_line_inactive_state LOW
|
|
#define tx_key_line_active_state HIGH
|
|
#define tx_key_line_inactive_state LOW
|
|
#define ptt_input_pin_active_state LOW
|
|
#define ptt_input_pin_inactive_state HIGH
|
|
#define tx_inhibit_pin_active_state LOW
|
|
#define tx_inhibit_pin_inactive_state HIGH
|
|
#define tx_pause_pin_active_state LOW
|
|
#define tx_pause_pin_inactive_state HIGH
|
|
#define sidetone_line_active_state HIGH
|
|
#define sidetone_line_inactive_state LOW
|
|
|
|
#if defined(ARDUINO_MAPLE_MINI)
|
|
#define button_value_factor 4095
|
|
#else
|
|
#define button_value_factor 1023
|
|
#endif
|
|
|
|
#define farnsworth_timing_calibration 1.15
|
|
|
|
#define sidetone_volume_low_limit 10
|
|
#define sidetone_volume_high_limit 500
|
|
|
|
#define command_mode_acknowledgement_character 'C'
|
|
|
|
#if defined(FEATURE_COMMAND_MODE_ENHANCED_CMD_ACKNOWLEDGEMENT)
|
|
#define command_a_iambic_a "A"
|
|
#define command_b_iambic_b "B"
|
|
#define command_c_single_paddle "SINGLE"
|
|
#define command_d_ultimatic "ULT"
|
|
#define command_h_weight_dit_dah_ratio_default "R"
|
|
#define command_i_tx_on "TX ON"
|
|
#define command_i_tx_off "TX OFF"
|
|
#define command_k_dit_dah_buffers_on "ON"
|
|
#define command_k_dit_dah_buffers_off "OFF"
|
|
#define command_n_paddle_reverse "REV"
|
|
#define command_n_paddle_normal "NORM"
|
|
#define command_o_sidetone_off "ST OFF"
|
|
#define command_o_sidetone_paddle_only "ST PD ONLY"
|
|
#define command_o_sidetone_on "ST ON"
|
|
#define command_t_tune_mode "TUNE"
|
|
#define command_v_potentiometer_on "POT ON"
|
|
#define command_v_potentiometer_off "POT OFF"
|
|
|
|
#define command_error "ERR"
|
|
|
|
#endif //FEATURE_COMMAND_MODE_ENHANCED_CMD_ACKNOWLEDGEMENT
|
|
|
|
#endif //TEST_SETTINGS_1
|
|
|
|
//*********************************************************************************************************************
|
|
//*********************************************************************************************************************
|
|
//*********************************************************************************************************************
|
|
//*********************************************************************************************************************
|
|
//*********************************************************************************************************************
|
|
|
|
#if defined(TEST_SETTINGS_2)
|
|
|
|
|
|
#define initial_speed_wpm 17 // "factory default" keyer speed setting
|
|
#define initial_sidetone_freq 588 // "factory default" sidetone frequency setting
|
|
#define sidetone_hz_limit_low 299
|
|
#define sidetone_hz_limit_high 2001
|
|
#define hz_high_beep 1500 // frequency in hertz of high beep
|
|
#define hz_low_beep 400 // frequency in hertz of low beep
|
|
#define initial_dah_to_dit_ratio 300 // 300 = 3 / normal 3:1 ratio
|
|
#define initial_ptt_lead_time_tx1 0 // PTT lead time in mS
|
|
#define initial_ptt_tail_time_tx1 10 // PTT tail time in mS
|
|
#define initial_ptt_lead_time_tx2 0 // PTT lead time in mS
|
|
#define initial_ptt_tail_time_tx2 10 // PTT tail time in mS
|
|
#define initial_ptt_lead_time_tx3 0 // PTT lead time in mS
|
|
#define initial_ptt_tail_time_tx3 10 // PTT tail time in mS
|
|
#define initial_ptt_lead_time_tx4 0 // PTT lead time in mS
|
|
#define initial_ptt_tail_time_tx4 10 // PTT tail time in mS
|
|
#define initial_ptt_lead_time_tx5 0 // PTT lead time in mS
|
|
#define initial_ptt_tail_time_tx5 10 // PTT tail time in mS
|
|
#define initial_ptt_lead_time_tx6 0 // PTT lead time in mS
|
|
#define initial_ptt_tail_time_tx6 10 // PTT tail time in mS
|
|
#define initial_qrss_dit_length 1 // QRSS dit length in seconds
|
|
#define initial_pot_wpm_low_value 12 // Potentiometer WPM fully CCW
|
|
#define initial_pot_wpm_high_value 30 // Potentiometer WPM fully CW
|
|
#define wpm_limit_low 5
|
|
#define wpm_limit_high 60
|
|
#define potentiometer_change_threshold 0.9 // don't change the keyer speed until pot wpm has changed more than this
|
|
#define potentiometer_reading_threshold 1
|
|
#define send_buffer_size 150
|
|
#define default_length_letterspace 3
|
|
#define default_length_wordspace 7
|
|
#define default_keying_compensation 0 // number of milliseconds to extend all dits and dahs - for QSK on boatanchors
|
|
#define default_first_extension_time 0 // number of milliseconds to extend first sent dit or dah
|
|
#define default_pot_full_scale_reading 1023
|
|
#define default_weighting 50 // 50 = weighting factor of 1 (normal)
|
|
#define default_ptt_hang_time_wordspace_units 0.0
|
|
#define winkey_c0_wait_time 1 // the number of milliseconds to wait to send 0xc0 byte after send buffer has been sent
|
|
#define winkey_command_timeout_ms 5000
|
|
#define winkey_discard_bytes_startup 3 // this is used if OPTION_WINKEY_DISCARD_BYTES_AT_STARTUP is enabled above
|
|
#define winkey_xoff_threshold 20 // the number of chars in the buffer when we begin sending XOFFs
|
|
#define winkey_xon_threshold 10 // the number of chars in the buffer below which we deactivate XOFF
|
|
#define default_memory_repeat_time 3000 // time in milliseconds
|
|
#define LCD_COLUMNS 16
|
|
#define LCD_ROWS 2
|
|
#define lcd_i2c_address_mathertel_PCF8574 0x27 // I2C address of display
|
|
#define hell_pixel_microseconds 4025
|
|
#define program_memory_limit_consec_spaces 1
|
|
#define serial_leading_zeros 1 // set to 1 to activate leading zeros in serial numbers (i.e. #1 = 001)
|
|
#define serial_cut_numbers 0 // set to 1 to activate cut numbers in serial numbers (i.e. #10 = 1T, #19 = 1N)
|
|
#define go_to_sleep_inactivity_time 10 // minutes - FEATURE_SLEEP
|
|
#define default_cmos_super_keyer_iambic_b_timing_percent 33 // use with FEATURE_CMOS_SUPER_KEYER_IAMBIC_B_TIMING; should be between 0 to 99 % (0% = true iambic b;100% = iambic a behavior)
|
|
#define cw_echo_timing_factor 0.25
|
|
#define winkey_paddle_echo_buffer_decode_time_factor 1600.0
|
|
#define potentiometer_always_on 0
|
|
#define ptt_interlock_check_every_ms 100
|
|
#define ptt_interlock_active_state HIGH
|
|
#define unknown_cw_character '*'
|
|
#define cli_paddle_echo_on_at_boot 1
|
|
#define cli_straight_key_echo_on_at_boot 1
|
|
#define tx_key_dit_and_dah_pins_active_state HIGH
|
|
#define tx_key_dit_and_dah_pins_inactive_state LOW
|
|
#define potentiometer_check_interval_ms 150
|
|
#define default_paddle_interruption_quiet_time_element_lengths 0
|
|
#define default_wordsworth_wordspace 6
|
|
#define default_wordsworth_repetition 1
|
|
#define serial_program_memory_buffer_size 500
|
|
#define eeprom_write_time_ms 30000
|
|
|
|
#ifdef FEATURE_BUTTONS
|
|
#define analog_buttons_number_of_buttons 4 // includes the command button (command button + 3 memory buttons = 4)
|
|
#define analog_buttons_r1 10
|
|
#define analog_buttons_r2 1.2
|
|
#endif
|
|
|
|
|
|
#if defined(FEATURE_BUTTONS) && !defined(FEATURE_PS2_KEYBOARD) && !defined(FEATURE_USB_KEYBOARD) && !defined(FEATURE_COMMAND_LINE_INTERFACE) && !defined(FEATURE_WINKEY_EMULATION)
|
|
#define number_of_memories byte(analog_buttons_number_of_buttons-1)
|
|
#else
|
|
#define number_of_memories byte(12)
|
|
#endif
|
|
|
|
#ifdef FEATURE_CAPACITIVE_PADDLE_PINS
|
|
#define capacitance_threshold 2
|
|
#endif //FEATURE_CAPACITIVE_PADDLE_PINS
|
|
|
|
#ifdef FEATURE_LED_RING
|
|
#define led_ring_low_limit 10
|
|
#define led_ring_high_limit 50
|
|
#endif //FEATURE_LED_RING
|
|
|
|
#ifdef FEATURE_QLF
|
|
#define qlf_dit_max 125
|
|
#define qlf_dit_min 75
|
|
#define qlf_dah_max 200
|
|
#define qlf_dah_min 100
|
|
#define qlf_on_by_default 0
|
|
#endif //FEATURE_QLF
|
|
|
|
|
|
#ifdef FEATURE_WINKEY_EMULATION
|
|
#ifdef OPTION_WINKEY_UCXLOG_9600_BAUD
|
|
#define WINKEY_DEFAULT_BAUD 9600
|
|
#else
|
|
#define WINKEY_DEFAULT_BAUD 1200
|
|
#endif //OPTION_WINKEY_UCXLOG_9600_BAUD
|
|
// alter these below to map alternate sidetones for Winkey interface protocol emulation
|
|
#ifdef OPTION_WINKEY_2_SUPPORT
|
|
#define WINKEY_SIDETONE_1 3759
|
|
#define WINKEY_SIDETONE_2 1879
|
|
#define WINKEY_SIDETONE_3 1252
|
|
#define WINKEY_SIDETONE_4 940
|
|
#define WINKEY_SIDETONE_5 752
|
|
#define WINKEY_SIDETONE_6 625
|
|
#define WINKEY_SIDETONE_7 535
|
|
#define WINKEY_SIDETONE_8 469
|
|
#define WINKEY_SIDETONE_9 417
|
|
#define WINKEY_SIDETONE_10 375
|
|
#else //OPTION_WINKEY_2_SUPPORT
|
|
#define WINKEY_SIDETONE_1 4000
|
|
#define WINKEY_SIDETONE_2 2000
|
|
#define WINKEY_SIDETONE_3 1333
|
|
#define WINKEY_SIDETONE_4 1000
|
|
#define WINKEY_SIDETONE_5 800
|
|
#define WINKEY_SIDETONE_6 666
|
|
#define WINKEY_SIDETONE_7 571
|
|
#define WINKEY_SIDETONE_8 500
|
|
#define WINKEY_SIDETONE_9 444
|
|
#define WINKEY_SIDETONE_10 400
|
|
#endif //OPTION_WINKEY_2_SUPPORT
|
|
|
|
#define WINKEY_1_REPORT_VERSION_NUMBER 10
|
|
#define WINKEY_2_REPORT_VERSION_NUMBER 23
|
|
|
|
// alter these to map to alternate hang time wordspace units
|
|
#define WINKEY_HANG_TIME_1_0 1.0
|
|
#define WINKEY_HANG_TIME_1_33 1.33
|
|
#define WINKEY_HANG_TIME_1_66 1.66
|
|
#define WINKEY_HANG_TIME_2_0 2.0
|
|
|
|
#define WINKEY_RETURN_THIS_FOR_ADMIN_GET_CAL 0x16
|
|
#define WINKEY_RETURN_THIS_FOR_ADMIN_PADDLE_A2D 0xEE
|
|
#define WINKEY_RETURN_THIS_FOR_ADMIN_SPEED_A2D 0x00
|
|
|
|
#endif //FEATURE_WINKEY_EMULATION
|
|
|
|
|
|
|
|
#define PRIMARY_SERIAL_PORT &Serial
|
|
#define PRIMARY_SERIAL_PORT_BAUD 115200 // This applies only when the port is in Command Line Interface mode. In Winkey mode it will default to 1200.
|
|
|
|
#ifdef FEATURE_COMMAND_LINE_INTERFACE_ON_SECONDARY_PORT
|
|
#define SECONDARY_SERIAL_PORT &Serial1
|
|
#define SECONDARY_SERIAL_PORT_BAUD 115200
|
|
#endif
|
|
|
|
|
|
#define CW_DECODER_SCREEN_COLUMNS 120 // word wrap at this many columns
|
|
#define CW_DECODER_SPACE_PRINT_THRESH 4.5 // print space if no tone for this many element lengths
|
|
#define CW_DECODER_SPACE_DECODE_THRESH 2.0 // invoke character decode if no tone for this many element lengths
|
|
#define CW_DECODER_NOISE_FILTER 20 // ignore elements shorter than this (mS)
|
|
|
|
#define STRAIGHT_KEY_ACTIVE_STATE LOW
|
|
|
|
#ifdef FEATURE_DYNAMIC_DAH_TO_DIT_RATIO
|
|
#define DYNAMIC_DAH_TO_DIT_RATIO_LOWER_LIMIT_WPM 30
|
|
#define DYNAMIC_DAH_TO_DIT_RATIO_LOWER_LIMIT_RATIO 300 // 300 = 3:1 ratio
|
|
#define DYNAMIC_DAH_TO_DIT_RATIO_UPPER_LIMIT_WPM 70
|
|
#define DYNAMIC_DAH_TO_DIT_RATIO_UPPER_LIMIT_RATIO 240 // 240 = 2.4:1 ratio
|
|
#endif //FEATURE_DYNAMIC_DAH_TO_DIT_RATIO
|
|
|
|
#if defined(FEATURE_COMPETITION_COMPRESSION_DETECTION)
|
|
#define COMPETITION_COMPRESSION_DETECTION_ARRAY_SIZE 16
|
|
#define COMPETITION_COMPRESSION_DETECTION_TIME_INTERCHAR_LOWER_LIMIT 1
|
|
#define COMPETITION_COMPRESSION_DETECTION_TIME_INTERCHAR_UPPER_LIMIT 6.0
|
|
#define COMPETITION_COMPRESSION_DETECTION_AVERAGE_ALARM_THRESHOLD 3.0
|
|
#endif //FEATURE_COMPETITION_COMPRESSION_DETECTION
|
|
|
|
#if defined(FEATURE_SLEEP)
|
|
#define KEYER_AWAKE_PIN_AWAKE_STATE HIGH
|
|
#define KEYER_AWAKE_PIN_ASLEEP_STATE LOW
|
|
#endif
|
|
|
|
#if defined(FEATURE_ETHERNET)
|
|
// #define FEATURE_ETHERNET_IP {192,168,1,178} // default IP address ("192.168.1.178")
|
|
// #define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xED}
|
|
#define FEATURE_ETHERNET_IP {192,168,1,179} // default IP address ("192.168.1.179")
|
|
#define FEATURE_ETHERNET_MAC {0xDE,0xAD,0xBE,0xEF,0xFE,0xEE}
|
|
|
|
#define FEATURE_ETHERNET_GATEWAY {192,168,1,1} // default gateway
|
|
#define FEATURE_ETHERNET_SUBNET_MASK {255,255,255,0} // default subnet mask
|
|
#define FEATURE_ETHERNET_WEB_LISTENER_PORT 80
|
|
#define FEATURE_UDP_SEND_BUFFER_SIZE 128
|
|
#define FEATURE_UDP_RECEIVE_BUFFER_SIZE 128
|
|
#endif //FEATURE_ETHERNET
|
|
|
|
#define WEB_SERVER_CONTROL_TX_KEY_TIME_LIMIT_SECS 10
|
|
|
|
#define FEATURE_INTERNET_LINK_MAX_LINKS 2
|
|
#define FEATURE_INTERNET_LINK_DEFAULT_RCV_UDP_PORT 8888
|
|
#define FEATURE_INTERNET_LINK_BUFFER_TIME_MS 500
|
|
|
|
#if defined(FEATURE_4x4_KEYPAD)|| defined (FEATURE_3x4_KEYPAD)
|
|
#define KEYPAD_ROWS 4 //KeyPad Rows
|
|
#if defined(FEATURE_4x4_KEYPAD)
|
|
#define KEYPAD_COLS 4 //keypad Columns
|
|
#else
|
|
#define KEYPAD_COLS 3
|
|
#endif
|
|
#define mem1 0 //Memory numbers for Keypad: Actual memory numbers start with "0"
|
|
#define mem2 1
|
|
#define mem3 2
|
|
#define mem4 3
|
|
#define mem5 4
|
|
#define mem6 5
|
|
#define mem7 6
|
|
#define mem8 7
|
|
#define mem9 8
|
|
#define mem10 9
|
|
#define mem11 10
|
|
#define mem12 11
|
|
#endif //#if defined(FEATURE_4x4_KEYPAD)|| defined (FEATURE_3x4_KEYPAD)
|
|
|
|
#define initial_sidetone_mode 1 // Sidetone mode, 0=OFF, 1=ON, 2=PADDLE_ONLY
|
|
#define initial_command_mode_speed_wpm 20
|
|
|
|
#if defined(OPTION_DFROBOT_LCD_COMMAND_BUTTONS)
|
|
|
|
// For V1.1 board use these values
|
|
#define dfrobot_btnRIGHT_analog 50
|
|
#define dfrobot_btnUP_analog 250
|
|
#define dfrobot_btnDOWN_analog 450
|
|
#define dfrobot_btnLEFT_analog 650
|
|
#define dfrobot_btnSELECT_analog 850
|
|
|
|
// For V1.0 board use these values
|
|
// #define dfrobot_btnRIGHT_analog 50
|
|
// #define dfrobot_btnUP_analog 195
|
|
// #define dfrobot_btnDOWN_analog 380
|
|
// #define dfrobot_btnLEFT_analog 555
|
|
// #define dfrobot_btnSELECT_analog 790
|
|
|
|
// button to memory mappings (0 = command button, 1 = memory 1, 2 = memory 2, etc.)
|
|
#define dfrobot_btnRIGHT 2
|
|
#define dfrobot_btnUP 1
|
|
#define dfrobot_btnDOWN 3
|
|
#define dfrobot_btnLEFT 4
|
|
#define dfrobot_btnSELECT 0
|
|
#define dfrobot_btnNONE 255 // do not change
|
|
|
|
#endif
|
|
|
|
|
|
#define sequencer_pins_active_state HIGH
|
|
#define sequencer_pins_inactive_state LOW
|
|
#define ptt_line_active_state HIGH
|
|
#define ptt_line_inactive_state LOW
|
|
#define tx_key_line_active_state HIGH
|
|
#define tx_key_line_inactive_state LOW
|
|
#define ptt_input_pin_active_state LOW
|
|
#define ptt_input_pin_inactive_state HIGH
|
|
#define tx_inhibit_pin_active_state LOW
|
|
#define tx_inhibit_pin_inactive_state HIGH
|
|
#define tx_pause_pin_active_state LOW
|
|
#define tx_pause_pin_inactive_state HIGH
|
|
|
|
|
|
#if defined(ARDUINO_MAPLE_MINI)
|
|
#define button_value_factor 4095 //sp5iou contributed
|
|
#else
|
|
#define button_value_factor 1023
|
|
#endif
|
|
|
|
#define farnsworth_timing_calibration 1.15
|
|
|
|
#define sidetone_volume_low_limit 10
|
|
#define sidetone_volume_high_limit 500
|
|
|
|
#define custom_startup_field "your custom text here" // an example could be callsign and name, eg. "AB1XYZ Bob", (or "Worlds best operator" which requires a 20 column display), string length shouldo be no more than the number of columns on the display
|
|
|
|
#define command_mode_acknowledgement_character 'R'
|
|
|
|
#if defined(FEATURE_COMMAND_MODE_ENHANCED_CMD_ACKNOWLEDGEMENT)
|
|
#define command_a_iambic_a "A"
|
|
#define command_b_iambic_b "B"
|
|
#define command_c_single_paddle "SINGLE"
|
|
#define command_d_ultimatic "ULT"
|
|
#define command_h_weight_dit_dah_ratio_default "R"
|
|
#define command_i_tx_on "TX ON"
|
|
#define command_i_tx_off "TX OFF"
|
|
#define command_k_dit_dah_buffers_on "ON"
|
|
#define command_k_dit_dah_buffers_off "OFF"
|
|
#define command_n_paddle_reverse "REV"
|
|
#define command_n_paddle_normal "NORM"
|
|
#define command_o_sidetone_off "ST OFF"
|
|
#define command_o_sidetone_paddle_only "ST PD ONLY"
|
|
#define command_o_sidetone_on "ST ON"
|
|
#define command_v_potentiometer_on "POT ON"
|
|
#define command_v_potentiometer_off "POT OFF"
|
|
|
|
#define command_error "ERR"
|
|
|
|
#endif //FEATURE_COMMAND_MODE_ENHANCED_CMD_ACKNOWLEDGEMENT
|
|
|
|
#endif //TEST_SETTINGS_2
|
|
|
|
// ######## ######## ###### ########
|
|
// ## ## ## ## ##
|
|
// ## ## ## ##
|
|
// ## ###### ###### ##
|
|
// ## ## ## ##
|
|
// ## ## ## ## ##
|
|
// ## ######## ###### ##
|