//
// Created by SQ5RWU on 2016-12-24.
// Extended by OK1TE
//

#ifndef RS41HUP_CONFIG_H
#define RS41HUP_CONFIG_H

#ifdef USE_EXTERNAL_CONFIG
#include "config_external.h"
#else


//********** RTTY
#define SEND_RTTY 1 // Set to 0 to disable RTTY
//**************RTTY Data Format**********************
// $$$<callsign>,<frame#>,[<hh:mm:ss>],[<latitude>,<longitude>],[<height>],[<speed>],[<rtty comment>],[<radio chip temperature (°C)>],[<battery voltage>],[<used gps satellites>],[<good gps datasets>,<bad gps datasets>,<gps fix flags>]*<CRC>
#define RTTY_CALLSIGN "F6KHK" // put your RTTY callsign here, max. 15 characters
#define SEND_RTTY_TIME 1
#define SEND_RTTY_LATLON 1
#define SEND_RTTY_HEIGHT 1
#define SEND_RTTY_SPEED 1
#define SEND_RTTY_MESSAGE 1
#define SEND_RTTY_TEMPERATURE 1
#define SEND_RTTY_VOLTAGE 1
#define SEND_RTTY_SATELLITES 1
#define SEND_RTTY_GPSDATA 1

#define RTTY_COMMENT " Rs41 tracker!"				// max. 25 characters
#define RTTY_WWL 1 // Send WWL instead of the comment
// World Wide Locator pairs (precision)
#define PAIR_COUNT 4 // max. 6 (12 characters WWL)

#define RTTY_FREQUENCY  433.500f //Mhz middle frequency

//************RTTY Shift*********************** si4032
#define RTTY_DEVIATION 0x2	// RTTY shift = RTTY_DEVIATION x 270Hz

//************RTTY Speed*********************** si4032
#define RTTY_SPEED  75 // RTTY baudrate 45, 50, 75, 100

//************rtty bits************************ si4032
#define RTTY_7BIT   1 // if 0 --> 5 bits

//************rtty stop bits******************* si4032
#define RTTY_USE_2_STOP_BITS   0


//********** APRS
#define SEND_APRS 1 // Set to 0 to disable APRS
#define APRS_CALLSIGN "F6KHK" // put your APRS callsign here, 6 characters. If your callsign is shorter add spaces

#define APRS_SSID 'B' // put your APRS SSID here
// 0 --> Your primary station usually fixed and message capable
// 1 --> generic additional station, digi, mobile, wx, etc.
// 2 --> generic additional station, digi, mobile, wx, etc.
// 3 --> generic additional station, digi, mobile, wx, etc.
// 4 --> generic additional station, digi, mobile, wx, etc.
// 5 --> Other network sources (Dstar, Iphones, Blackberry's etc)
// 6 --> Special activity, Satellite ops, camping or 6 meters, etc.
// 7 --> walkie talkies, HT's or other human portable
// 8 --> boats, sailboats, RV's or second main mobile
// 9 --> Primary Mobile (usually message capable)
// A --> internet, Igates, echolink, winlink, AVRS, APRN, etc.
// B --> balloons, aircraft, spacecraft, etc.
// C --> APRStt, DTMF, RFID, devices, one-way trackers*, etc.
// D --> Weather stations
// E --> Truckers or generally full time drivers
// F --> generic additional station, digi, mobile, wx, etc.

#define APRS_DISPLAY_TABLE '/' // put desired APRS Display Table character here
// / --> Primary symbol Table (Mostly stations)
// \\ --> Alternate symbol table (Mostly Objects)
#define APRS_DISPLAY_SYMBOL 'O' // put desired APRS Display Symbol character here
// O --> Balloon (in the primary table)
// See: http://www.aprs.net/vm/DOS/SYMBOLS.HTM

#define APRS_FREQUENCY  432.500f //Mhz middle frequency

#define APRS_COMMENT " Rs41 tracker!"
#define APRS_RELAYS "WIDE1-1,WIDE2-1"
#define APRS_DESTINATION "APZQAP"
#define APRS_DESTINATION_SSID '0'
#define RTTY_TO_APRS_RATIO 2 //transmit APRS packet with each x RTTY packet

//********** Morse (CW)
#define SEND_MORSE 1 // Set to 0 to disable CW
#define MORSE_PREFIX "DE F6KHK" // Start of the message
#define SEND_MORSE_WWL 1 // in <WW-locator>
#define SEND_MORSE_HEIGHT 0 // ASL <altitude>
#define SEND_MORSE_VOLTAGE 0 // bat <voltage>
#define MORSE_SUFFIX " +" // AR^ (end of transmission)
#define MORSE_WPM 20 // Speed in words per minute 5 - 40
#define RTTY_TO_MORSE_RATIO 3 // Transmit morse message with each x RTTY packet

//********* power definition**************************
#define TX_POWER  5 // PWR 0...7 0- MIN ... 7 - MAX
// 0 --> -1dBm
// 1 --> 2dBm
// 2 --> 5dBm
// 3 --> 8dBm
// 4 --> 11dBm
// 5 --> 14dBm
// 6 --> 17dBm
// 7 --> 20dBm
//****************************************************

// Switch sonde ON/OFF via Button
// If this is a flight you might prevent sonde from powered off by button
#define ALLOW_DISABLE_BY_BUTTON 1

//********** Frame Delay in msec**********************
#define TX_DELAY  5000

// Enable/disable LED blinking
// when set to 0, LEDs will stop blinking approx. 10 minutes after powering on the sonde
#define LED_ENABLED 1

#endif

#endif //RS41HUP_CONFIG_H