RadioSonde/RX_FSK/data/screens1.txt

268 lines
7.6 KiB
Plaintext
Raw Normal View History

2022-12-10 14:57:48 +01:00
### screens1.txt: OLED display
# Definition of display content and action behaviour
#
# Timer: (view timer, rx timer, norx timer)
# - value -1: timer is disabled; value>=0: timer fires after (value) seconds
# - view timer: time since current view (display mode and sonde) was started
# - rx timer: time since when sonde data has been received continuously (trigger immediatly after RX)
# - norx timer: time since when no sonde data has been received continuously
# (rx and norx timer is started after tuning a new frequency and receiving a signal or not receiving
# anything for a 1s period)
#
# Actions:
# - W: activate WiFi scan
# - F: activate frequency spectrum display
# - 0: activate "Scan:" display (this is basically just display mode 0)
# - x: (1..N): activate display mode x [deprecated]
# - >: activate next display mode
# - D: activate default receiver display (display mode specified in config)
# - +: advance to next active sonde from QRG config
# - #: no action
#
# Display content (lower/upper case: small/large font)
# line,column=content
# for ILI9225 its also possible to indicate
# line,column,width=content for text within a box of width 'width'
# line,column,-width=content for right-justified text
#
# XText : Text
# F(suffix): frequency (with suffix, e.g., " MHz")
# L latitade
# O lOngitute
# A altitude
# Hm(suffix) hor. speed m/s (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
# Hk(suffix) hor. speed km/h (suffix: e.g. "km/h"; no suffix=>km/h as 16x8 bitmap for SSD1306 display only)
# V(suffix) vert. speef (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
# Ix sonde ID (default/d: dxlaprs; s: short id, n: real serial number)
# RS41,RS92: all identical R1234567
# DFMx: ID M12345678; short ID and serial 12345678
# M10: ID ME95231F0; short ID: M95231F0; serial 9062104592
# Q signal quality statistics bar
# T type string (RS41/DFM9/DFM6/RS92)
# C afC value
# N ip address (only tiny font)
# S scan list entry info: l/empty: launch site name, #=entry nr, t=total entries, a=active entries, /: #/t
# K RS41 kill timer values: Kl launch timer, Kb burst timer, Kc kill countdown
# format: K_4: h:mm k_6: h:mm:ss k_s: sssss, nothing shown for other sonde
# Mx telemetry value x (t temp p preassure h hyg b battery)
# Gx GPS-related data
# raw data from GPS: GA, GO, GH, GC: LAtitude, lOngitude, Altutide(Height), Course over ground
# relative to sonde: GD, GI, GB: Distance, dIrection (absolute), relative Bearing
# G0 GPS circle diagram e.g. 3,5=g0NCS,50,ff0000,000033,5,ffff00,4,ffffff
# "N" (what is on top: N=north C=course)
# "C" (where does the arrow point to: C=course, S=sonde)
# "S" (what is shown by the bullet: C=course, S=sonde)
# 50: circle radius, followed by fg and bg color
# 5: bullet radius, followed by fg color
# 4: arrow width, followed by fg color
# R RSSI
# B battery(T-Beam 1.0) S=status V=Batt.Volt C=charge current D=discharge current
# U=USB volt I=USB current T=IC temp
#
# fonts=x,y can be used to select font (x=small, y=large) for all items below
# for SSD1306, x and y can be used to select one of those fonts:
# (y should be a 1x2 font (1,5,6,7), x a small font)
# u8x8_font_chroma48medium8_r, // 0 ** default small
# u8x8_font_7x14_1x2_f, // 1 ** default large
# u8x8_font_amstrad_cpc_extended_f, // 2
# u8x8_font_5x7_f, // 3
# u8x8_font_5x8_f, // 4
# u8x8_font_8x13_1x2_f, // 5
# u8x8_font_8x13B_1x2_f, // 6
# u8x8_font_7x14B_1x2_f, // 7
# u8x8_font_artossans8_r, // 8
# u8x8_font_artosserif8_r, // 9
# u8x8_font_torussansbold8_r, // 10
# u8x8_font_victoriabold8_r, // 11
# u8x8_font_victoriamedium8_r, // 12
# u8x8_font_pressstart2p_f, // 13
# u8x8_font_pcsenior_f, // 14
# u8x8_font_pxplusibmcgathin_f, // 15
# u8x8_font_pxplusibmcga_f, // 16
# u8x8_font_pxplustandynewtv_f, // 17
#
# for ILI9225, these fonts are available:
# Terminal6x8 // 0
# Terminal11x16 // 1
# Terminal12x16 // 2
# FreeMono9pt7b, // 3
# FreeMono12pt7b, // 4
# FreeSans9pt7b, // 5
# FreeSans12pt7b, // 6
# Picopixel, // 7
#
# color=rrggbb,rrggbb can be used to select color (foreground, background)
# see https://github.com/Nkawu/TFT_22_ILI9225/wiki#color-reference for example (use without "#"-sign)
#
# for TFT display, coordinates and width are multiplied by xscale,yscale and later used in pixels
# with scale=1,1 you can directly use pixel coordinates. (default: xscale=13,yscale=22 => 8 lines, 16 columns)
###########
#
# Default configuration for "Scanner" display:
# - view timer disabled; rx timer=0; norx timer = 0
# => after 1 second immediately an action is triggered
# (norx: go to next sonde; rx: go to default receiver display)
# - key1 actions: D,0,F,W
# => Button press activates default receiver view, double press does nothing
# Mid press activates Spectrum display, long press activates Wifi scan
# - key2 has no function
@Scanner
timer=-1,0,0
key1action=D,#,F,W
key2action=D,#,#,#
timeaction=#,D,+
0,0=XScan
0,5=S#:
0,9=T
3,0=F MHz
5,0,16=S
7,0=bVV
#7,0=gV
7,5=n
############
# Default configuration for "Legacy" display:
# - view timer=-1, rx timer=-1 (disabled); norx timer=20 (or -1 for "old" behaviour)
# => norx timer fires after not receiving a singla for 20 seconds
# - key1 actions: +,0,F,W
# => Button1 press: next sonde; double press => @Scanner display
# => Mid press activates Spectrum display, long press activates Wifi scan
# - key2 actions: 2,#,#,#
# => BUtton2 activates display 2 (@Field)
# - timer actions: #,#,0
# (norx timer: if no signal for >20 seconds: go back to scanner mode)
#
@Legacy
timer=-1,-1,N
key1action=+,0,F,W
key2action=>,#,#,#
timeaction=#,#,0
0,5=f MHz
1,8=c
0,0=t
1,0=is
2,0=L
4,0=O
2,10=a
3,10=h
4,9=v
6,0=R
6,7=Q
############
# Configuratoon for "Field" display (display 2)
# similar to @Legacy, but no norx timer, and Key2 goes to display 4
@Field
timer=-1,-1,N
key1action=+,0,F,W
key2action=>,#,#,#
timeaction=#,#,#
2,0=L
4,0=O
3,10=h
4,9=v
0,0=Is
6,0=A
6,7=Q
############
# Configuration for "Field2" display (display 3)
# similar to @Field
@Field2
timer=-1,-1,N
key1action=+,0,F,W
key2action=>,#,#,#
timeaction=#,#,#
2,0=L
4,0=O
1,12=t
0,9=f
3,10=h
4,9=v
0,0=Is
6,0=A
6,7=Q
#############
# Configuration for "GPS" display
# not yet the final version, just for testing
@GPSDIST
timer=-1,-1,-1
key1action=+,0,F,W
key2action=>,#,#,#
timeaction=#,#,#
0,0=Is
0,9=f
1,12=t
2,0=L
4,0=O
2,10=a
3,10=h
4,9=v
5,9=gC
5,13=gB
6,7=Q
7,0=gV
7,2=xd=
7,4=gD
7,12=gI°
############
@BatteryOLED
timer=-1,-1,-1
key1action=+,0,F,W
key2action=>,#,#,#
timeaction=#,#,#
fonts=0,1
0,0=xBat.Status:
0,12=bS
1,0=xBatt:
1,6=bVV
2,0=bCmA (charge)
3,0=bDmA (disch.)
4,0=xUSB:
4,5=bUV
5,5=bImA
6,0=xTemp:
6,5=bT C
#############
@Meteo
timer=-1,-1,-1
key1action=+,0,F,W
key2action=>,#,#,#
timeaction=#,#,#
fonts=0,1
0,0=Is
0,9=f
1,12=t
2,0=xSonde
3,0=xData
2,10=A
4,0=Mt°C
4,9=Mh%rH
6,0=MphPa
6,11=MbV
#############
@GPS-Data
timer=-1,-1,-1
key1action=+,0,F,W
key2action=>,#,#,#
timeaction=#,#,#
fonts=0,1
0,0=xGPS-Data
1,0=xLAT :
1,6=gA
2,0=xLONG:
2,6=gO
3,0=xALT :
3,9=gH
4,0=xSonde
5,0=xAlt :
5,6=a
6,0=xDist:
6,6=gD