first commit
This commit is contained in:
commit
cab552d78c
BIN
Display.pdf
Executable file
BIN
Display.pdf
Executable file
Binary file not shown.
91
README.md
Executable file
91
README.md
Executable file
|
|
@ -0,0 +1,91 @@
|
||||||
|
RadioSonde Version 0.8.5
|
||||||
|
============================
|
||||||
|
<img src="http://xavier.debert.free.fr/RS/TTGO.jpg" width="50%"><img src="http://xavier.debert.free.fr/RS/TTGO2.jpg" width="50%">
|
||||||
|
<img src="http://xavier.debert.free.fr/RS/TTGO3.jpg" width="50%"><img src="http://xavier.debert.free.fr/RS/TTGO4.jpg" width="50%"><img src="http://xavier.debert.free.fr/RS/TTGO5.jpg" width="50%">
|
||||||
|
<img src="http://xavier.debert.free.fr/RS/Web4.png" width="20%"><img src="http://xavier.debert.free.fr/RS/Web.png" width="20%">
|
||||||
|
<img src="http://xavier.debert.free.fr/RS/Web3.png" width="20%"><img src="http://xavier.debert.free.fr/RS/Web2.png" width="20%">
|
||||||
|
<img src="http://xavier.debert.free.fr/RS/Web5.png" width="20%">
|
||||||
|
|
||||||
|
|
||||||
|
Projet basé sur le travail de DL9RDZ
|
||||||
|
====================================
|
||||||
|
|
||||||
|
Pour TTGO LORA 32 esp32 pico D4
|
||||||
|
Décodage de RadioSonde RS41 and DFM06/09 et M10
|
||||||
|
|
||||||
|
Attention à la version de votre TTGO!
|
||||||
|
vous devez modifier dans config.txt, le port de l'écran OLED
|
||||||
|
- TTGO v1: SDA=4 SCL=15, RST=16
|
||||||
|
- TTGO v2: SDA=21 SCL=22, RST=16
|
||||||
|
|
||||||
|
## Version en production 0.8.5 et devel 0.8.7
|
||||||
|
|
||||||
|
## 0.8.0
|
||||||
|
travail de refonte et réécriture du code
|
||||||
|
## 0.8.1
|
||||||
|
modification de la partie Web
|
||||||
|
## 0.8.5
|
||||||
|
Evolution majeur du système
|
||||||
|
affichage du pourcentage de la batterie en mode scanning
|
||||||
|
création d'une fenetre Batterie, Boussole
|
||||||
|
suppresion lib et code TFT
|
||||||
|
création Azimute, elevation correction de Bugs majeur , mineur
|
||||||
|
Ajout fonction Smetre, Buzzer, QTH, Gps on off ...
|
||||||
|
mise à jour OTA
|
||||||
|
trop de modification pour toutes les expliciter!
|
||||||
|
|
||||||
|
|
||||||
|
## Les Boutons optionnel à ajouter(souder)
|
||||||
|
sur les GPIO 1002 et 1004
|
||||||
|
attention:
|
||||||
|
|
||||||
|
+5V--[ SW ]---GPIO----[ R1 ]---/ R1=10 ou 12KOhms
|
||||||
|
|
||||||
|
- appuie court <1.5 seconds
|
||||||
|
- appuie double court 0.5 seconds
|
||||||
|
- appuie moyen 2-4 seconds
|
||||||
|
- appuie long >5 seconds
|
||||||
|
|
||||||
|
## Wifi configuration
|
||||||
|
|
||||||
|
Au démarrage, si aucune connexion possible au wifi paramètré, il monte un Wifi AP
|
||||||
|
le SSID et mot de passe par défaut est: Radiosonde
|
||||||
|
en mode AP, il doit être en 192.168.4.1,
|
||||||
|
mais vous avez aussi la possibilité de mettre http://radiosonde.local dans n'importe quel Wifi
|
||||||
|
connecté.
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
## Mode Scanne
|
||||||
|
|
||||||
|
Le fichier qrg.txt contient la liste par défaut des cannaux.
|
||||||
|
pour y configurer les noms, fréquences et mode [M=M10, 6=DFM06, 9=DFM09 et 4=RS41]
|
||||||
|
|
||||||
|
|
||||||
|
## Mode Réception
|
||||||
|
|
||||||
|
En réception, une seul fréquence est décodé, les infos de la sonde (ID, GPS, RSSI, ...)
|
||||||
|
seront affichées dans plusieur fenetre à choisir ( 0 à 6) à configurer dans la page Web
|
||||||
|
rubrique config.
|
||||||
|
In receiving mode, a single frequency will be decoded, and sonde info (ID, GPS
|
||||||
|
coordinates, RSSI) will be displayed. The bar above the IP address indicates,
|
||||||
|
for the last 18 frames, if reception was successfull (|) or failed (.)
|
||||||
|
A DOUBLE press will switch to scanning mode.
|
||||||
|
A SHORT press will switch to the next channel in channels.txt
|
||||||
|
|
||||||
|
## Mode Analyseur
|
||||||
|
|
||||||
|
Le mode analyseur de spectre (400..406 MHz) est affiché (chaque ligne == 50 kHz)
|
||||||
|
Pour les cartes TTGO sans bouton configurable, il y a un nouveau paramètre dans config.txt:
|
||||||
|
- spectrum=10 // 0=off / 1-99 nombre de seconds pour afficher l'analyseur
|
||||||
|
- timer=1 // 0=off / 1= afficher le compte à rebours du spectre dans l'affichage du spectre
|
||||||
|
- marker=1 // 0=off / 1= afficher la fréquence dans l'affichage du spectre
|
||||||
|
|
||||||
|
## Setup
|
||||||
|
|
||||||
|
voir Setup.md pour l'installation!
|
||||||
|
|
||||||
|
73
|
||||||
|
Xavier
|
||||||
|
|
||||||
|
|
||||||
2412
RadioSonde_FSK/RadioSonde_FSK.ino
Executable file
2412
RadioSonde_FSK/RadioSonde_FSK.ino
Executable file
File diff suppressed because it is too large
Load Diff
109
RadioSonde_FSK/data/config.txt
Executable file
109
RadioSonde_FSK/data/config.txt
Executable file
|
|
@ -0,0 +1,109 @@
|
||||||
|
#-------------------------------#
|
||||||
|
# Hardware depending settings
|
||||||
|
#-------------------------------#
|
||||||
|
# pin: 255=disabled; x=button x+128=touch button
|
||||||
|
button_pin=2
|
||||||
|
button2_pin=4
|
||||||
|
# No specification in config file: try autodetection (gpio4 pin level at startup)
|
||||||
|
#button_pin=0
|
||||||
|
#button2_pin=255
|
||||||
|
#button2_axp=0
|
||||||
|
# LED port
|
||||||
|
#led_pout=-1
|
||||||
|
# OLED Setup is depending on hardware of LoRa board
|
||||||
|
# TTGO v1: SDA=4 SCL=15, RST=16
|
||||||
|
# TTGO v2: SDA=21 SCL=22, RST=16
|
||||||
|
# T-BEAM, OLED: SDA=21, SCL=22, RST=16
|
||||||
|
# T-BEAM, ILI9225: SDA=4, CLK=21, RS=2, RST=22, CS=0
|
||||||
|
# No specification in config file: try autodetection (gpio4 pin level at startup)
|
||||||
|
#
|
||||||
|
# disptype: 0=OLED, 1=ILI9225
|
||||||
|
#disptype=0
|
||||||
|
#oled_sda=21
|
||||||
|
#oled_scl=22
|
||||||
|
#oled_rst=16
|
||||||
|
oled_orient=1
|
||||||
|
gpsOn=0
|
||||||
|
gps_rxd=-1
|
||||||
|
gps_txd=-1
|
||||||
|
gps_lat=43.59169
|
||||||
|
gps_lon=7.10071
|
||||||
|
gps_alt=123
|
||||||
|
# Show AFC value (for RS41 only, maybe also DFM, but useful for RS92 or M10)
|
||||||
|
# showafc=1
|
||||||
|
# Frequency correction, in Hz
|
||||||
|
# freqofs=0
|
||||||
|
#-------------------------------#
|
||||||
|
# General config settings
|
||||||
|
#-------------------------------#
|
||||||
|
maxsonde=20
|
||||||
|
debug=0
|
||||||
|
# wifi mode: 1=client in background; 2=AP in background; 3=client on startup, ap if failure
|
||||||
|
wifi=3
|
||||||
|
# TCP/IP KISS TNC in port 14590 for APRSdroid (0=disabled, 1=enabled)
|
||||||
|
kisstnc.active = 1
|
||||||
|
mdnsname=radiosonde
|
||||||
|
# display configuration. List of "displays"
|
||||||
|
# first entry: "Scanner" display
|
||||||
|
# second entry: default "Receiver" display
|
||||||
|
# additional entries: alternative receiver display, activated by button
|
||||||
|
display=0,1,2,3,4,5,6
|
||||||
|
# set to -1 to disable (used for "N" values in timers in screens.txt). Value in seconds
|
||||||
|
norx_timeout=20
|
||||||
|
vbatmax=1.86
|
||||||
|
vbatmin=1.64
|
||||||
|
sdOn=0
|
||||||
|
buzzerOn=0
|
||||||
|
buzzerPort=12
|
||||||
|
buzzerFreq=700
|
||||||
|
dbsmetre=1
|
||||||
|
#-------------------------------#
|
||||||
|
# Spectrum display settings
|
||||||
|
#-------------------------------#
|
||||||
|
startfreq=400
|
||||||
|
channelbw=10
|
||||||
|
spectrum=30 #10
|
||||||
|
noisefloor=-125
|
||||||
|
marker=1
|
||||||
|
#-------------------------------#
|
||||||
|
# APRS settings
|
||||||
|
#-------------------------------#
|
||||||
|
call=NOCALL
|
||||||
|
passcode=123456
|
||||||
|
#-------------------------------#
|
||||||
|
# Sonde specific settings: bandwidth
|
||||||
|
# valid values: 3100, 3900, 5200, 6300, 7800, 10400, 12500,
|
||||||
|
# 15600, 20800, 25000, ...
|
||||||
|
# other values will be rounded up to the next valid value
|
||||||
|
# rs92.alt2d: default altitude used by RS92 decoder if only 3 sats available
|
||||||
|
#-------------------------------#
|
||||||
|
rs41.agcbw=12500
|
||||||
|
rs41.rxbw=6300
|
||||||
|
rs92.rxbw=12500
|
||||||
|
rs92.alt2d=480
|
||||||
|
dfm.agcbw=20800
|
||||||
|
dfm.rxbw=10400
|
||||||
|
#-------------------------------#
|
||||||
|
# axudp for sending to aprsmap
|
||||||
|
#-------------------------------#
|
||||||
|
# local use only, do not feed to public services
|
||||||
|
# data not sanitized / quality checked, outliers not filtered out
|
||||||
|
axudp.active=1
|
||||||
|
axudp.host=monurl.fr
|
||||||
|
axudp.port=14580
|
||||||
|
axudp.symbol=/O
|
||||||
|
axudp.highrate=1
|
||||||
|
axudp.idformat=0
|
||||||
|
#-------------------------------#
|
||||||
|
# maybe some time in the future
|
||||||
|
#-------------------------------#
|
||||||
|
# currently simply not implemented, no need to put anything here anyway
|
||||||
|
tcp.active=0
|
||||||
|
tcp.host=radiosondy.info
|
||||||
|
tcp.port=14590
|
||||||
|
tcp.symbol=/O
|
||||||
|
tcp.highrate=20
|
||||||
|
tcp.idformat=0
|
||||||
|
#-------------------------------#
|
||||||
|
# EOF
|
||||||
|
#-------------------------------#
|
||||||
BIN
RadioSonde_FSK/data/fontawesome-webfont.eot
Executable file
BIN
RadioSonde_FSK/data/fontawesome-webfont.eot
Executable file
Binary file not shown.
BIN
RadioSonde_FSK/data/fontawesome-webfont.woff
Executable file
BIN
RadioSonde_FSK/data/fontawesome-webfont.woff
Executable file
Binary file not shown.
187
RadioSonde_FSK/data/index.html
Executable file
187
RadioSonde_FSK/data/index.html
Executable file
|
|
@ -0,0 +1,187 @@
|
||||||
|
<!DOCTYPE html>
|
||||||
|
<html>
|
||||||
|
<head>
|
||||||
|
<title>RadioSonde (version %VERSION_ID%)</title>
|
||||||
|
<meta name="viewport" content="width=device-width, initial-scale=1">
|
||||||
|
<link rel="icon" href="data:,">
|
||||||
|
<link rel="stylesheet" type="text/css" href="style.css">
|
||||||
|
</head>
|
||||||
|
<body style="background-color: #008CBA;">
|
||||||
|
<div style="background-color: #FFFFFF;">
|
||||||
|
<h2><i onclick="w3_open()" class="fa fa-bars"></i> RadioSonde (version %VERSION_ID%)</h2>
|
||||||
|
</div>
|
||||||
|
<!--
|
||||||
|
<p>GPIO state: <strong> %STATE%</strong></p>
|
||||||
|
<p><a href="/on"><button class="button">ON</button></a></p>
|
||||||
|
<p><a href="/off"><button class="button button2">OFF</button></a></p>
|
||||||
|
-->
|
||||||
|
|
||||||
|
<!-- Side Navigation -->
|
||||||
|
<nav style="text-align: left; background-color: #aaa; font-weight: bold; display:none" id="mySidebar">
|
||||||
|
<h3>MENU</h3>
|
||||||
|
<button class="tablinks fa fa-close" onclick="w3_close();"> Close</button><br>
|
||||||
|
<button class="tablinks fa fa-dashboard" onclick="selTab(event,'QRG'); w3_close()" id="defaultTab"> QRG</button><br>
|
||||||
|
<button class="tablinks fa fa-wifi" onclick="selTab(event,'WiFi'); w3_close()"> WiFi</button><br>
|
||||||
|
<button class="tablinks fa fa-database" onclick="selTab(event,'Data'); w3_close()"> Data</button><br>
|
||||||
|
<button class="tablinks fa fa-map-marker" onclick="selTab(event,'SondeMap'); w3_close()"> URL SondeMap</button><br>
|
||||||
|
<button class="tablinks fa fa-gears" onclick="selTab(event,'Config'); w3_close()"> Config</button><br>
|
||||||
|
<button class="tablinks fa fa-sliders" onclick="selTab(event,'Control'); w3_close()"> Control</button><br>
|
||||||
|
<button class="tablinks fa fa-download" onclick="selTab(event,'Update'); w3_close()"> Update</button><br>
|
||||||
|
<button class="tablinks fa fa-support" onclick="selTab(event,'About'); w3_close()"> About</button><br><br><br><br>
|
||||||
|
</nav>
|
||||||
|
|
||||||
|
<div id="QRG" class="tabcontent">
|
||||||
|
<h3> QRG - Setup</h3>
|
||||||
|
<iframe src="qrg.html" style="border:none;" width="100%%" height="100%%"></iframe>
|
||||||
|
</div>
|
||||||
|
|
||||||
|
<div id="WiFi" class="tabcontent">
|
||||||
|
<h3> WiFi - Settings</h3>
|
||||||
|
<iframe src="wifi.html" style="border:none;" width="100%%" height="100%%"></iframe>
|
||||||
|
</div>
|
||||||
|
|
||||||
|
<div id="Data" class="tabcontent" data-src="status.html">
|
||||||
|
<h3>Data</h3>
|
||||||
|
<iframe src="status.html" style="border:none;" width="100%%" height="100%%"></iframe>
|
||||||
|
</div>
|
||||||
|
|
||||||
|
<div id="SondeMap" class="tabcontent" data-src="sondemap.html">
|
||||||
|
<iframe src="sondemap.html" style="border:none;" width="98%%" height="98%%"></iframe>
|
||||||
|
</div>
|
||||||
|
<!--
|
||||||
|
<div id="SondeMap" class="tabcontent" data-src="http://wx.dl2mf.de/#?">
|
||||||
|
<iframe src="http://wx.dl2mf.de/" style="border:none;" width="98%%" height="98%%"></iframe>
|
||||||
|
</div>
|
||||||
|
<div id="SondeMap2" class="tabcontent" data-src="https://radiosondy.info/">
|
||||||
|
<iframe src="https://radiosondy.info/" style="border:none;" width="98%%" height="98%%"></iframe>
|
||||||
|
</div>
|
||||||
|
<div id="SondeMap3" class="tabcontent" data-src="https://tracker.sondehub.org/?sondehub=1#!mt=osm&mz=8&qm=6_hours&mc=43.76665,6.24011&f=none&q=RS_*;*chase">
|
||||||
|
<iframe src="https://tracker.sondehub.org/?sondehub=1#!mt=osm&mz=8&qm=6_hours&mc=43.76665,6.24011&f=none&q=RS_*;*chase" style="border:none;" width="98%%" height="98%%"></iframe>
|
||||||
|
</div>
|
||||||
|
-->
|
||||||
|
<div id="Config" class="tabcontent">
|
||||||
|
<h3>Configuration</h3>
|
||||||
|
<iframe src="config.html" style="border:none;" width="100%%" height="100%%"></iframe>
|
||||||
|
</div>
|
||||||
|
|
||||||
|
<div id="Control" class="tabcontent">
|
||||||
|
<h3>Control</h3>
|
||||||
|
<iframe src="control.html" style="border:none;" width="100%%" height="100%%"></iframe>
|
||||||
|
</div>
|
||||||
|
|
||||||
|
<div id="Update" class="tabcontent">
|
||||||
|
<h3>Update</h3>
|
||||||
|
<iframe src="update.html" style="border:none;" width="100%%" height="100%%"></iframe>
|
||||||
|
</div>
|
||||||
|
|
||||||
|
<div id="About" class="tabcontent">
|
||||||
|
<h3>About</h3>
|
||||||
|
%VERSION_NAME%<br>
|
||||||
|
Copyright © 2019 by Hansi Reiser, DL9RDZ<br>
|
||||||
|
(version %VERSION_ID%)<br>
|
||||||
|
with mods by <a href="https://www.dl2mf.de/" target="_blank">Meinhard Guenther, DL2MF</a><br>
|
||||||
|
<br>
|
||||||
|
Autodetect info: %AUTODETECT_INFO%<br>
|
||||||
|
<br>
|
||||||
|
CopyLeft 2020 Modifier par <a href="http://openpmr.cla.fr">FRS2013</a><br>
|
||||||
|
Licence GNU GPL <a href="https://www.gnu.org/licenses/gpl-2.0.txt">https://www.gnu.org/licenses/gpl-2.0.txt</a>
|
||||||
|
for details
|
||||||
|
</div>
|
||||||
|
|
||||||
|
<div style="background-color: #008CBA;"><br>
|
||||||
|
<h2>by FRS2013</h2>
|
||||||
|
</div>
|
||||||
|
<script>
|
||||||
|
function selTab(evt, id) {
|
||||||
|
var i, tabcontent, tablinks;
|
||||||
|
tabcontent=document.getElementsByClassName("tabcontent");
|
||||||
|
for(i=0; i<tabcontent.length; i++) {
|
||||||
|
tabcontent[i].style.display = "none";
|
||||||
|
var link = tabcontent[i].dataset.src;
|
||||||
|
if(link) {
|
||||||
|
var iframe = tabcontent[i].getElementsByTagName("iframe")[0];
|
||||||
|
iframe.setAttribute("src", "");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
tablinks=document.getElementsByClassName("tablinks");
|
||||||
|
for(i=0; i<tablinks.length; i++) {
|
||||||
|
tablinks[i].className = tablinks[i].className.replace(" active", "");
|
||||||
|
}
|
||||||
|
var act = document.getElementById(id);
|
||||||
|
act.style.display = "block";
|
||||||
|
evt.currentTarget.className += " active";
|
||||||
|
|
||||||
|
var link = act.dataset.src;
|
||||||
|
if(link) {
|
||||||
|
var iframe = act.getElementsByTagName("iframe")[0];
|
||||||
|
iframe.setAttribute("src", link);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
document.getElementById("defaultTab").click();
|
||||||
|
</script>
|
||||||
|
<!-- Script for Sidebar, Tabs, Accordions, Progress bars and slideshows -->
|
||||||
|
<script>
|
||||||
|
// Side navigation
|
||||||
|
function w3_open() {
|
||||||
|
var x = document.getElementById("mySidebar");
|
||||||
|
x.style.width = "100%";
|
||||||
|
x.style.height = "80%";
|
||||||
|
x.style.fontSize = "40px";
|
||||||
|
x.style.paddingTop = "0%";
|
||||||
|
x.style.display = "block";
|
||||||
|
}
|
||||||
|
function w3_close() {
|
||||||
|
document.getElementById("mySidebar").style.display = "none";
|
||||||
|
}
|
||||||
|
|
||||||
|
// Tabs
|
||||||
|
function openCity(evt, cityName) {
|
||||||
|
var i;
|
||||||
|
var x = document.getElementsByClassName("city");
|
||||||
|
for (i = 0; i < x.length; i++) {
|
||||||
|
x[i].style.display = "none";
|
||||||
|
}
|
||||||
|
var activebtn = document.getElementsByClassName("testbtn");
|
||||||
|
for (i = 0; i < x.length; i++) {
|
||||||
|
activebtn[i].className = activebtn[i].className.replace(" w3-dark-grey", "");
|
||||||
|
}
|
||||||
|
document.getElementById(cityName).style.display = "block";
|
||||||
|
evt.currentTarget.className += " w3-dark-grey";
|
||||||
|
}
|
||||||
|
|
||||||
|
var mybtn = document.getElementsByClassName("testbtn")[0];
|
||||||
|
mybtn.click();
|
||||||
|
|
||||||
|
// Accordions
|
||||||
|
function myAccFunc(id) {
|
||||||
|
var x = document.getElementById(id);
|
||||||
|
if (x.className.indexOf("w3-show") == -1) {
|
||||||
|
x.className += " w3-show";
|
||||||
|
} else {
|
||||||
|
x.className = x.className.replace(" w3-show", "");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
// Slideshows
|
||||||
|
var slideIndex = 1;
|
||||||
|
|
||||||
|
function plusDivs(n) {
|
||||||
|
slideIndex = slideIndex + n;
|
||||||
|
showDivs(slideIndex);
|
||||||
|
}
|
||||||
|
|
||||||
|
function showDivs(n) {
|
||||||
|
var x = document.getElementsByClassName("mySlides");
|
||||||
|
if (n > x.length) {slideIndex = 1}
|
||||||
|
if (n < 1) {slideIndex = x.length} ;
|
||||||
|
for (i = 0; i < x.length; i++) {
|
||||||
|
x[i].style.display = "none";
|
||||||
|
}
|
||||||
|
x[slideIndex-1].style.display = "block";
|
||||||
|
}
|
||||||
|
|
||||||
|
showDivs(1);
|
||||||
|
</script>
|
||||||
|
</body>
|
||||||
|
</html>
|
||||||
|
|
||||||
4
RadioSonde_FSK/data/networks.txt
Executable file
4
RadioSonde_FSK/data/networks.txt
Executable file
|
|
@ -0,0 +1,4 @@
|
||||||
|
Radiosonde
|
||||||
|
Radiosonde
|
||||||
|
VotreSSID
|
||||||
|
votrepass
|
||||||
24
RadioSonde_FSK/data/qrg.txt
Executable file
24
RadioSonde_FSK/data/qrg.txt
Executable file
|
|
@ -0,0 +1,24 @@
|
||||||
|
# Frequency in Mhz (format nnn.nnn)
|
||||||
|
# Type (4=RS41, R=RS92, 6=DFM normal, DFM-06, 9=DFM inverted, DFM-09, M=M10)
|
||||||
|
#
|
||||||
|
400.000 9 + Test(FR)
|
||||||
|
401.500 4 - Santander(ES)
|
||||||
|
402.000 M + Nimes(FR)
|
||||||
|
402.800 4 + Cuneo(IT)
|
||||||
|
403.000 6 + Ajactio(FR)
|
||||||
|
403.010 6 + Canjuers(FR)
|
||||||
|
404.200 4 + Rome(IT)
|
||||||
|
404.500 4 - Payern(CH)
|
||||||
|
404.500 M - Bourges(FR)
|
||||||
|
404.789 9 + Frejus1(FR)
|
||||||
|
404.800 4 + Milan(IT)
|
||||||
|
405.000 R + Frejus2(FR)
|
||||||
|
401.199 M - Trappes(FR)
|
||||||
|
405.789 9 + Pegomas(FR)
|
||||||
|
405.100 4 - Lindenberg
|
||||||
|
405.700 4 - Bergen
|
||||||
|
405.900 4 - Bergen_2
|
||||||
|
405.100 4 - Meppen_2
|
||||||
|
405.300 4 - Essen
|
||||||
|
405.500 4 - Essen_2
|
||||||
|
# end
|
||||||
249
RadioSonde_FSK/data/screens.txt
Executable file
249
RadioSonde_FSK/data/screens.txt
Executable file
|
|
@ -0,0 +1,249 @@
|
||||||
|
# Definition of display content and action behaviour
|
||||||
|
#
|
||||||
|
# Timer: (view timer, rx timer, norx timer)
|
||||||
|
# - value -1: timer is disabled; value>=0: timer fires after (value) seconds
|
||||||
|
# - view timer: time since current view (display mode and sonde) was started
|
||||||
|
# - rx timer: time since when sonde data has been received continuously (trigger immediatly after RX)
|
||||||
|
# - norx timer: time since when no sonde data has been received continuously
|
||||||
|
# (rx and norx timer is started after tuning a new frequency and receiving a signal or not receiving
|
||||||
|
# anything for a 1s period)
|
||||||
|
#
|
||||||
|
# Actions:
|
||||||
|
# - W: activate WiFi scan
|
||||||
|
# - F: activate frequency spectrum display
|
||||||
|
# - 0: activate "Scan:" display (this is basically just display mode 0)
|
||||||
|
# - x: (1..N): activate display mode x [deprecated]
|
||||||
|
# - >: activate next display mode
|
||||||
|
# - D: activate default receiver display (display mode specified in config)
|
||||||
|
# - +: advance to next active sonde from QRG config
|
||||||
|
# - #: no action
|
||||||
|
#
|
||||||
|
# Display content (lower/upper case: small/large font)
|
||||||
|
# line,column=content
|
||||||
|
# for ILI9225 its also possible to indicate
|
||||||
|
# line,column,width=content for text within a box of width 'width'
|
||||||
|
# line,column,-width=content for right-justified text
|
||||||
|
#
|
||||||
|
# XText : Text
|
||||||
|
# F(suffix): frequency (with suffix, e.g., " MHz")
|
||||||
|
# L latitade
|
||||||
|
# O lOngitute
|
||||||
|
# A altitude
|
||||||
|
# Hm(suffix) hor. speed m/s (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||||
|
# Hk(suffix) hor. speed km/h (suffix: e.g. "km/h"; no suffix=>km/h as 16x8 bitmap for SSD1306 display only)
|
||||||
|
# V(suffix) vert. speef (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||||
|
# Ix sonde ID (dfm format by x: d=>dxlaprs, a=>autorx, s=>real serial number)
|
||||||
|
# Q signal quality statistics bar
|
||||||
|
# T type string (RS41/DFM9/DFM6/RS92)
|
||||||
|
# C afC value
|
||||||
|
# N ip address (only tiny font)
|
||||||
|
# S scan list entry info: l/empty: launch site name, #=entry nr, t=total entries, a=active entries, /: #/t
|
||||||
|
# K RS41 kill timer values: Kl launch timer, Kb burst timer, Kc kill countdown
|
||||||
|
# format: K_4: h:mm k_6: h:mm:ss k_s: sssss, nothing shown for other sonde
|
||||||
|
# Mx telemetry value x (t temp p preassure h hyg) [not yet implemented, maybe some day in future]
|
||||||
|
# Gx GPS-related data
|
||||||
|
# raw data from GPS: GA, GO, GH, GC: LAtitude, lOngitude, Altutide(Height), Course over ground
|
||||||
|
# relative to sonde: GD, GI, GB: Distance, dIrection (absolute), relative Bearing
|
||||||
|
# G0 GPS circle diagram e.g. 3,5=g0NCS,50,ff0000,000033,5,ffff00,4,ffffff
|
||||||
|
# "N" (what is on top: N=north C=course)
|
||||||
|
# "C" (where does the arrow point to: C=course, S=sonde)
|
||||||
|
# "S" (what is shown by the bullet: C=course, S=sonde)
|
||||||
|
# 50: circle radius, followed by fg and bg color
|
||||||
|
# 5: bullet radius, followed by fg color
|
||||||
|
# 4: arrow width, followed by fg color
|
||||||
|
# R RSSI
|
||||||
|
# B battery(T-Beam 1.0) S=status V=Batt.Volt C=charge current D=discharge current
|
||||||
|
# U=USB volt I=USB current T=IC temp
|
||||||
|
# AA Azimut degres
|
||||||
|
#
|
||||||
|
# fonts=x,y can be used to select font (x=small, y=large) for all items below
|
||||||
|
# for SSD1306, x and y can be used to select one of those fonts:
|
||||||
|
# (y should be a 1x2 font (1,5,6,7), x a small font)
|
||||||
|
# u8x8_font_chroma48medium8_r, // 0 ** default small
|
||||||
|
# u8x8_font_7x14_1x2_f, // 1 ** default large
|
||||||
|
# u8x8_font_amstrad_cpc_extended_f, // 2
|
||||||
|
# u8x8_font_5x7_f, // 3
|
||||||
|
# u8x8_font_5x8_f, // 4
|
||||||
|
# u8x8_font_8x13_1x2_f, // 5
|
||||||
|
# u8x8_font_8x13B_1x2_f, // 6
|
||||||
|
# u8x8_font_7x14B_1x2_f, // 7
|
||||||
|
# u8x8_font_artossans8_r, // 8
|
||||||
|
# u8x8_font_artosserif8_r, // 9
|
||||||
|
# u8x8_font_torussansbold8_r, // 10
|
||||||
|
# u8x8_font_victoriabold8_r, // 11
|
||||||
|
# u8x8_font_victoriamedium8_r, // 12
|
||||||
|
# u8x8_font_pressstart2p_f, // 13
|
||||||
|
# u8x8_font_pcsenior_f, // 14
|
||||||
|
# u8x8_font_pxplusibmcgathin_f, // 15
|
||||||
|
# u8x8_font_pxplusibmcga_f, // 16
|
||||||
|
# u8x8_font_pxplustandynewtv_f, // 17
|
||||||
|
#
|
||||||
|
#
|
||||||
|
# color=rrggbb,rrggbb can be used to select color (foreground, background)
|
||||||
|
# see https://github.com/Nkawu/TFT_22_ILI9225/wiki#color-reference for example (use without "#"-sign)
|
||||||
|
#
|
||||||
|
# for TFT display, coordinates and width are multiplied by xscale,yscale and later used in pixels
|
||||||
|
# with scale=1,1 you can directly use pixel coordinates. (default: xscale=13,yscale=22 => 8 lines, 16 columns)
|
||||||
|
###########
|
||||||
|
#
|
||||||
|
# Default configuration for "Scanner" display:
|
||||||
|
# - view timer disabled; rx timer=0; norx timer = 0
|
||||||
|
# => after 1 second immediately an action is triggered
|
||||||
|
# (norx: go to next sonde; rx: go to default receiver display)
|
||||||
|
# - key1 actions: D,0,F,W
|
||||||
|
# => Button press activates default receiver view, double press does nothing
|
||||||
|
# Mid press activates Spectrum display, long press activates Wifi scan
|
||||||
|
# - key2 has no function
|
||||||
|
@Scanner
|
||||||
|
timer=-1,0,0
|
||||||
|
key1action=D,#,F,W
|
||||||
|
key2action=#,#,#,#
|
||||||
|
timeaction=#,D,+
|
||||||
|
0,0=XScan
|
||||||
|
0,5=S#:
|
||||||
|
0,9=T
|
||||||
|
3,0=F MHz
|
||||||
|
5,0=S
|
||||||
|
7,0=y%
|
||||||
|
7,5=n
|
||||||
|
|
||||||
|
############
|
||||||
|
# Default configuration for "Legacy" display:
|
||||||
|
# - view timer=-1, rx timer=-1 (disabled); norx timer=20 (or -1 for "old" behaviour)
|
||||||
|
# => norx timer fires after not receiving a singla for 20 seconds
|
||||||
|
# - key1 actions: +,0,F,W
|
||||||
|
# => Button1 press: next sonde; double press => @Scanner display
|
||||||
|
# => Mid press activates Spectrum display, long press activates Wifi scan
|
||||||
|
# - key2 actions: 2,#,#,#
|
||||||
|
# => BUtton2 activates display 2 (@Field)
|
||||||
|
# - timer actions: #,#,0
|
||||||
|
# (norx timer: if no signal for >20 seconds: go back to scanner mode)
|
||||||
|
#
|
||||||
|
@Legacy
|
||||||
|
timer=-1,-1,N
|
||||||
|
key1action=+,0,F,W
|
||||||
|
key2action=>,#,#,#
|
||||||
|
timeaction=#,#,0
|
||||||
|
0,0=t
|
||||||
|
0,5=f MHz
|
||||||
|
1,0=is
|
||||||
|
1,8=c
|
||||||
|
2,0=L
|
||||||
|
2,10=a
|
||||||
|
3,10=h
|
||||||
|
4,0=O
|
||||||
|
4,9=v
|
||||||
|
5,9=gC
|
||||||
|
5,13=gB
|
||||||
|
6,0=R
|
||||||
|
6,7=Q
|
||||||
|
7,6=gD
|
||||||
|
7,12=gI°
|
||||||
|
|
||||||
|
|
||||||
|
############
|
||||||
|
# Configuratoon for "Field" display (display 2)
|
||||||
|
# similar to @Legacy, but no norx timer, and Key2 goes to display 4
|
||||||
|
@Field
|
||||||
|
timer=-1,-1,N
|
||||||
|
key1action=+,0,F,W
|
||||||
|
key2action=>,#,#,#
|
||||||
|
timeaction=#,#,#
|
||||||
|
0,0=Is
|
||||||
|
2,0=L
|
||||||
|
2,9=xEl:
|
||||||
|
2,12=gE
|
||||||
|
4,0=O
|
||||||
|
3,10=h
|
||||||
|
4,9=v
|
||||||
|
5,9=gC
|
||||||
|
5,13=gB
|
||||||
|
6,0=A
|
||||||
|
6,7=Q
|
||||||
|
7,6=gD
|
||||||
|
7,12=gI°
|
||||||
|
|
||||||
|
############
|
||||||
|
# Configuration for "Field2" display (display 3)
|
||||||
|
# similar to @Field
|
||||||
|
@Field2
|
||||||
|
timer=-1,-1,N
|
||||||
|
key1action=+,0,F,W
|
||||||
|
key2action=>,#,#,#
|
||||||
|
timeaction=#,#,#
|
||||||
|
0,0=Is
|
||||||
|
0,9=f
|
||||||
|
1,12=t
|
||||||
|
2,9=xEl:
|
||||||
|
2,12=gE
|
||||||
|
2,0=L
|
||||||
|
3,10=h
|
||||||
|
4,0=O
|
||||||
|
4,9=v
|
||||||
|
5,9=gC
|
||||||
|
5,13=gB
|
||||||
|
6,0=A
|
||||||
|
6,7=Q
|
||||||
|
7,6=gD
|
||||||
|
7,12=gI°
|
||||||
|
|
||||||
|
#############
|
||||||
|
# Configuration for "GPS" display
|
||||||
|
# not yet the final version, just for testing
|
||||||
|
@GPSDIST
|
||||||
|
timer=-1,-1,-1
|
||||||
|
key1action=+,0,F,W
|
||||||
|
key2action=>,#,#,#
|
||||||
|
timeaction=#,#,#
|
||||||
|
0,0=Is
|
||||||
|
0,9=f
|
||||||
|
1,12=t
|
||||||
|
2,0=L
|
||||||
|
4,0=O
|
||||||
|
2,10=a
|
||||||
|
3,10=h
|
||||||
|
4,9=v
|
||||||
|
5,9=gC
|
||||||
|
5,13=gB
|
||||||
|
6,0=xEl:
|
||||||
|
6,2=gE
|
||||||
|
6,7=Q
|
||||||
|
7,0=gW
|
||||||
|
7,2=xd=
|
||||||
|
7,4=gD
|
||||||
|
7,11=gI°
|
||||||
|
|
||||||
|
############
|
||||||
|
# Boussole Oled
|
||||||
|
@BOUSSOLE
|
||||||
|
timer=-1,-1,-1
|
||||||
|
key1action=+,0,F,W
|
||||||
|
key2action=>,#,#,#
|
||||||
|
timeaction=#,#,#
|
||||||
|
0,0=g0
|
||||||
|
0,10=a
|
||||||
|
1,10=h
|
||||||
|
2,9=v
|
||||||
|
3,10=gC
|
||||||
|
3,13=gB
|
||||||
|
4,9=gD
|
||||||
|
5,11=gI°
|
||||||
|
6,9=xEl:
|
||||||
|
6,11=gE
|
||||||
|
7,9=t
|
||||||
|
|
||||||
|
############
|
||||||
|
@BatteryOLED
|
||||||
|
timer=-1,-1,-1
|
||||||
|
key1action=+,0,F,W
|
||||||
|
key2action=>,#,#,#
|
||||||
|
timeaction=#,#,#
|
||||||
|
fonts=0,1
|
||||||
|
0,0=xBat.Status:
|
||||||
|
2,0=xCpu:
|
||||||
|
2,7=bVV
|
||||||
|
4,0=xVbus:
|
||||||
|
4,7=bCV
|
||||||
|
6,0=xPower:
|
||||||
|
6,7=bPmW
|
||||||
|
|
||||||
10
RadioSonde_FSK/data/sondemap.html
Executable file
10
RadioSonde_FSK/data/sondemap.html
Executable file
|
|
@ -0,0 +1,10 @@
|
||||||
|
<html>
|
||||||
|
<head>
|
||||||
|
<link rel=\"stylesheet\" type=\"text/css\" href=\"style.css\">
|
||||||
|
</head>
|
||||||
|
<body>
|
||||||
|
<button class="tablinks" onclick="javascript:window.open('http://wx.dl2mf.de/','_self')"> Sonde Map</button><br><br>
|
||||||
|
<button class="tablinks" onclick="javascript:window.open('https://radiosondy.info/','_self')"> RadioSony</button><br><br>
|
||||||
|
<button class="tablinks" onclick="javascript:window.open('https://tracker.sondehub.org/?sondehub=1#!mt=osm&mz=8&qm=6_hours&mc=43.76665,6.24011&f=none&q=RS_*;*chase','_self')"> SondeHub</button><br><br>
|
||||||
|
</body>
|
||||||
|
</html>
|
||||||
659
RadioSonde_FSK/data/style.css
Executable file
659
RadioSonde_FSK/data/style.css
Executable file
|
|
@ -0,0 +1,659 @@
|
||||||
|
body, html {
|
||||||
|
height: 100%;
|
||||||
|
margin: 0;
|
||||||
|
font-family: Arial;
|
||||||
|
}
|
||||||
|
|
||||||
|
table, th, td {
|
||||||
|
border: 1px solid black;
|
||||||
|
border-collapse: collapse;
|
||||||
|
background-color: #ddd
|
||||||
|
}
|
||||||
|
|
||||||
|
td#caption {
|
||||||
|
text-align: center;
|
||||||
|
background-color: #aaa;
|
||||||
|
font-weight: bold;
|
||||||
|
}
|
||||||
|
|
||||||
|
td#sfreq {
|
||||||
|
background-color: #ccc;
|
||||||
|
}
|
||||||
|
|
||||||
|
.tab {
|
||||||
|
overflow: hidden;
|
||||||
|
border: 1px solid #ccc;
|
||||||
|
}
|
||||||
|
|
||||||
|
.tab button {
|
||||||
|
background-color: inherit;
|
||||||
|
float: left;
|
||||||
|
border: none;
|
||||||
|
outline: none;
|
||||||
|
cursor: pointer;
|
||||||
|
padding: 14px 16px;
|
||||||
|
transition: 0.3s;
|
||||||
|
}
|
||||||
|
|
||||||
|
.tab button:hover {
|
||||||
|
background-color: #ddd;
|
||||||
|
}
|
||||||
|
|
||||||
|
.tab button.active {
|
||||||
|
background-color: #ccc;
|
||||||
|
}
|
||||||
|
|
||||||
|
.tabcontent {
|
||||||
|
display: none;
|
||||||
|
padding: 6px 12px;
|
||||||
|
border: 1px solid #ccc;
|
||||||
|
border-top: none;
|
||||||
|
height: 100%;
|
||||||
|
background-color: #FFFFFF;
|
||||||
|
}
|
||||||
|
|
||||||
|
html {
|
||||||
|
font-family: Helvetica;
|
||||||
|
display: inline-block;
|
||||||
|
margin: 0px auto;
|
||||||
|
text-align: center;
|
||||||
|
}
|
||||||
|
h1{
|
||||||
|
color: #0F3376;
|
||||||
|
padding: 2vh;
|
||||||
|
}
|
||||||
|
p{
|
||||||
|
font-size: 1.5rem;
|
||||||
|
}
|
||||||
|
.button {
|
||||||
|
display: inline-block;
|
||||||
|
background-color: #008CBA;
|
||||||
|
border: none;
|
||||||
|
border-radius: 4px;
|
||||||
|
color: white;
|
||||||
|
padding: 16px 40px;
|
||||||
|
text-decoration: none;
|
||||||
|
font-size: 30px;
|
||||||
|
margin: 2px;
|
||||||
|
cursor: pointer;
|
||||||
|
}
|
||||||
|
.button2 {
|
||||||
|
background-color: #f44336;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*!
|
||||||
|
* Font Awesome 4.3.0 by @davegandy - http://fontawesome.io - @fontawesome
|
||||||
|
* License - http://fontawesome.io/license (Font: SIL OFL 1.1, CSS: MIT License)
|
||||||
|
*/@font-face{font-family:'FontAwesome';
|
||||||
|
src:url('fontawesome-webfont.eot?v=4.3.0');
|
||||||
|
src:url('fontawesome-webfont.eot?#iefix&v=4.3.0') format('embedded-opentype'),url('fontawesome-webfont.woff2?v=4.3.0') format('woff2'),url('fontawesome-webfont.woff?v=4.3.0') format('woff'),url('fontawesome-webfont.ttf?v=4.3.0') format('truetype'),url('fontawesome-webfont.svg?v=4.3.0#fontawesomeregular') format('svg');
|
||||||
|
font-weight:normal;
|
||||||
|
font-style:normal}.fa{display:inline-block;
|
||||||
|
font:normal normal normal 14px/1 FontAwesome;
|
||||||
|
font-size:inherit;
|
||||||
|
text-rendering:auto;
|
||||||
|
-webkit-font-smoothing:antialiased;
|
||||||
|
-moz-osx-font-smoothing:grayscale;
|
||||||
|
transform:translate(0, 0)}.fa-lg{font-size:1.33333333em;
|
||||||
|
line-height:.75em;
|
||||||
|
vertical-align:-15%}.fa-2x{font-size:2em}.fa-3x{font-size:3em}.fa-4x{font-size:4em}.fa-5x{font-size:5em}.fa-fw{width:1.28571429em;
|
||||||
|
text-align:center}.fa-ul{padding-left:0;
|
||||||
|
margin-left:2.14285714em;
|
||||||
|
list-style-type:none}.fa-ul>li{position:relative}.fa-li{position:absolute;
|
||||||
|
left:-2.14285714em;
|
||||||
|
width:2.14285714em;
|
||||||
|
top:.14285714em;
|
||||||
|
text-align:center}.fa-li.fa-lg{left:-1.85714286em}.fa-border{padding:.2em .25em .15em;
|
||||||
|
border:solid .08em #eee;
|
||||||
|
border-radius:.1em}.pull-right{float:right}.pull-left{float:left}.fa.pull-left{margin-right:.3em}.fa.pull-right{margin-left:.3em}.fa-spin{-webkit-animation:fa-spin 2s infinite linear;
|
||||||
|
animation:fa-spin 2s infinite linear}.fa-pulse{-webkit-animation:fa-spin 1s infinite steps(8);
|
||||||
|
animation:fa-spin 1s infinite steps(8)}@-webkit-keyframes fa-spin{0%{-webkit-transform:rotate(0deg);
|
||||||
|
transform:rotate(0deg)}100%{-webkit-transform:rotate(359deg);
|
||||||
|
transform:rotate(359deg)}}@keyframes fa-spin{0%{-webkit-transform:rotate(0deg);
|
||||||
|
transform:rotate(0deg)}100%{-webkit-transform:rotate(359deg);
|
||||||
|
transform:rotate(359deg)}}.fa-rotate-90{filter:progid:DXImageTransform.Microsoft.BasicImage(rotation=1);
|
||||||
|
-webkit-transform:rotate(90deg);
|
||||||
|
-ms-transform:rotate(90deg);
|
||||||
|
transform:rotate(90deg)}.fa-rotate-180{filter:progid:DXImageTransform.Microsoft.BasicImage(rotation=2);
|
||||||
|
-webkit-transform:rotate(180deg);
|
||||||
|
-ms-transform:rotate(180deg);
|
||||||
|
transform:rotate(180deg)}.fa-rotate-270{filter:progid:DXImageTransform.Microsoft.BasicImage(rotation=3);
|
||||||
|
-webkit-transform:rotate(270deg);
|
||||||
|
-ms-transform:rotate(270deg);
|
||||||
|
transform:rotate(270deg)}.fa-flip-horizontal{filter:progid:DXImageTransform.Microsoft.BasicImage(rotation=0, mirror=1);
|
||||||
|
-webkit-transform:scale(-1, 1);
|
||||||
|
-ms-transform:scale(-1, 1);
|
||||||
|
transform:scale(-1, 1)}.fa-flip-vertical{filter:progid:DXImageTransform.Microsoft.BasicImage(rotation=2, mirror=1);
|
||||||
|
-webkit-transform:scale(1, -1);
|
||||||
|
-ms-transform:scale(1, -1);
|
||||||
|
transform:scale(1, -1)}:root .fa-rotate-90,:root .fa-rotate-180,:root .fa-rotate-270,:root .fa-flip-horizontal,:root .fa-flip-vertical{filter:none}.fa-stack{position:relative;
|
||||||
|
display:inline-block;
|
||||||
|
width:2em;
|
||||||
|
height:2em;
|
||||||
|
line-height:2em;
|
||||||
|
vertical-align:middle}.fa-stack-1x,.fa-stack-2x{position:absolute;
|
||||||
|
left:0;
|
||||||
|
width:100%;
|
||||||
|
text-align:center}
|
||||||
|
.fa-stack-1x{line-height:inherit}
|
||||||
|
.fa-stack-2x{font-size:2em}
|
||||||
|
.fa-inverse{color:#fff}
|
||||||
|
.fa-glass:before{content:"\f000"}
|
||||||
|
.fa-music:before{content:"\f001"}
|
||||||
|
.fa-search:before{content:"\f002"}
|
||||||
|
.fa-envelope-o:before{content:"\f003"}
|
||||||
|
.fa-heart:before{content:"\f004"}
|
||||||
|
.fa-star:before{content:"\f005"}
|
||||||
|
.fa-star-o:before{content:"\f006"}
|
||||||
|
.fa-user:before{content:"\f007"}
|
||||||
|
.fa-film:before{content:"\f008"}
|
||||||
|
.fa-th-large:before{content:"\f009"}
|
||||||
|
.fa-th:before{content:"\f00a"}
|
||||||
|
.fa-th-list:before{content:"\f00b"}
|
||||||
|
.fa-check:before{content:"\f00c"}
|
||||||
|
.fa-remove:before,.fa-close:before,.fa-times:before{content:"\f00d"}
|
||||||
|
.fa-search-plus:before{content:"\f00e"}
|
||||||
|
.fa-search-minus:before{content:"\f010"}
|
||||||
|
.fa-power-off:before{content:"\f011"}
|
||||||
|
.fa-signal:before{content:"\f012"}
|
||||||
|
.fa-gear:before,.fa-cog:before{content:"\f013"}
|
||||||
|
.fa-trash-o:before{content:"\f014"}
|
||||||
|
.fa-home:before{content:"\f015"}
|
||||||
|
.fa-file-o:before{content:"\f016"}
|
||||||
|
.fa-clock-o:before{content:"\f017"}
|
||||||
|
.fa-road:before{content:"\f018"}
|
||||||
|
.fa-download:before{content:"\f019"}
|
||||||
|
.fa-arrow-circle-o-down:before{content:"\f01a"}
|
||||||
|
.fa-arrow-circle-o-up:before{content:"\f01b"}
|
||||||
|
.fa-inbox:before{content:"\f01c"}
|
||||||
|
.fa-play-circle-o:before{content:"\f01d"}
|
||||||
|
.fa-rotate-right:before,.fa-repeat:before{content:"\f01e"}
|
||||||
|
.fa-refresh:before{content:"\f021"}
|
||||||
|
.fa-list-alt:before{content:"\f022"}
|
||||||
|
.fa-lock:before{content:"\f023"}
|
||||||
|
.fa-flag:before{content:"\f024"}
|
||||||
|
.fa-headphones:before{content:"\f025"}
|
||||||
|
.fa-volume-off:before{content:"\f026"}
|
||||||
|
.fa-volume-down:before{content:"\f027"}
|
||||||
|
.fa-volume-up:before{content:"\f028"}
|
||||||
|
.fa-qrcode:before{content:"\f029"}
|
||||||
|
.fa-barcode:before{content:"\f02a"}
|
||||||
|
.fa-tag:before{content:"\f02b"}
|
||||||
|
.fa-tags:before{content:"\f02c"}
|
||||||
|
.fa-book:before{content:"\f02d"}
|
||||||
|
.fa-bookmark:before{content:"\f02e"}
|
||||||
|
.fa-print:before{content:"\f02f"}
|
||||||
|
.fa-camera:before{content:"\f030"}
|
||||||
|
.fa-font:before{content:"\f031"}
|
||||||
|
.fa-bold:before{content:"\f032"}
|
||||||
|
.fa-italic:before{content:"\f033"}
|
||||||
|
.fa-text-height:before{content:"\f034"}
|
||||||
|
.fa-text-width:before{content:"\f035"}
|
||||||
|
.fa-align-left:before{content:"\f036"}
|
||||||
|
.fa-align-center:before{content:"\f037"}
|
||||||
|
.fa-align-right:before{content:"\f038"}
|
||||||
|
.fa-align-justify:before{content:"\f039"}
|
||||||
|
.fa-list:before{content:"\f03a"}
|
||||||
|
.fa-dedent:before,.fa-outdent:before{content:"\f03b"}
|
||||||
|
.fa-indent:before{content:"\f03c"}
|
||||||
|
.fa-video-camera:before{content:"\f03d"}
|
||||||
|
.fa-photo:before,.fa-image:before,.fa-picture-o:before{content:"\f03e"}
|
||||||
|
.fa-pencil:before{content:"\f040"}
|
||||||
|
.fa-map-marker:before{content:"\f041"}
|
||||||
|
.fa-adjust:before{content:"\f042"}
|
||||||
|
.fa-tint:before{content:"\f043"}
|
||||||
|
.fa-edit:before,.fa-pencil-square-o:before{content:"\f044"}
|
||||||
|
.fa-share-square-o:before{content:"\f045"}
|
||||||
|
.fa-check-square-o:before{content:"\f046"}
|
||||||
|
.fa-arrows:before{content:"\f047"}
|
||||||
|
.fa-step-backward:before{content:"\f048"}
|
||||||
|
.fa-fast-backward:before{content:"\f049"}
|
||||||
|
.fa-backward:before{content:"\f04a"}
|
||||||
|
.fa-play:before{content:"\f04b"}
|
||||||
|
.fa-pause:before{content:"\f04c"}
|
||||||
|
.fa-stop:before{content:"\f04d"}
|
||||||
|
.fa-forward:before{content:"\f04e"}
|
||||||
|
.fa-fast-forward:before{content:"\f050"}
|
||||||
|
.fa-step-forward:before{content:"\f051"}
|
||||||
|
.fa-eject:before{content:"\f052"}
|
||||||
|
.fa-chevron-left:before{content:"\f053"}
|
||||||
|
.fa-chevron-right:before{content:"\f054"}
|
||||||
|
.fa-plus-circle:before{content:"\f055"}
|
||||||
|
.fa-minus-circle:before{content:"\f056"}
|
||||||
|
.fa-times-circle:before{content:"\f057"}
|
||||||
|
.fa-check-circle:before{content:"\f058"}
|
||||||
|
.fa-question-circle:before{content:"\f059"}
|
||||||
|
.fa-info-circle:before{content:"\f05a"}
|
||||||
|
.fa-crosshairs:before{content:"\f05b"}
|
||||||
|
.fa-times-circle-o:before{content:"\f05c"}
|
||||||
|
.fa-check-circle-o:before{content:"\f05d"}
|
||||||
|
.fa-ban:before{content:"\f05e"}
|
||||||
|
.fa-arrow-left:before{content:"\f060"}
|
||||||
|
.fa-arrow-right:before{content:"\f061"}
|
||||||
|
.fa-arrow-up:before{content:"\f062"}
|
||||||
|
.fa-arrow-down:before{content:"\f063"}
|
||||||
|
.fa-mail-forward:before,.fa-share:before{content:"\f064"}
|
||||||
|
.fa-expand:before{content:"\f065"}
|
||||||
|
.fa-compress:before{content:"\f066"}
|
||||||
|
.fa-plus:before{content:"\f067"}
|
||||||
|
.fa-minus:before{content:"\f068"}
|
||||||
|
.fa-asterisk:before{content:"\f069"}
|
||||||
|
.fa-exclamation-circle:before{content:"\f06a"}
|
||||||
|
.fa-gift:before{content:"\f06b"}
|
||||||
|
.fa-leaf:before{content:"\f06c"}
|
||||||
|
.fa-fire:before{content:"\f06d"}
|
||||||
|
.fa-eye:before{content:"\f06e"}
|
||||||
|
.fa-eye-slash:before{content:"\f070"}
|
||||||
|
.fa-warning:before,.fa-exclamation-triangle:before{content:"\f071"}
|
||||||
|
.fa-plane:before{content:"\f072"}
|
||||||
|
.fa-calendar:before{content:"\f073"}
|
||||||
|
.fa-random:before{content:"\f074"}
|
||||||
|
.fa-comment:before{content:"\f075"}
|
||||||
|
.fa-magnet:before{content:"\f076"}
|
||||||
|
.fa-chevron-up:before{content:"\f077"}
|
||||||
|
.fa-chevron-down:before{content:"\f078"}
|
||||||
|
.fa-retweet:before{content:"\f079"}
|
||||||
|
.fa-shopping-cart:before{content:"\f07a"}
|
||||||
|
.fa-folder:before{content:"\f07b"}
|
||||||
|
.fa-folder-open:before{content:"\f07c"}
|
||||||
|
.fa-arrows-v:before{content:"\f07d"}
|
||||||
|
.fa-arrows-h:before{content:"\f07e"}
|
||||||
|
.fa-bar-chart-o:before,.fa-bar-chart:before{content:"\f080"}
|
||||||
|
.fa-twitter-square:before{content:"\f081"}
|
||||||
|
.fa-facebook-square:before{content:"\f082"}
|
||||||
|
.fa-camera-retro:before{content:"\f083"}
|
||||||
|
.fa-key:before{content:"\f084"}
|
||||||
|
.fa-gears:before,.fa-cogs:before{content:"\f085"}
|
||||||
|
.fa-comments:before{content:"\f086"}
|
||||||
|
.fa-thumbs-o-up:before{content:"\f087"}
|
||||||
|
.fa-thumbs-o-down:before{content:"\f088"}
|
||||||
|
.fa-star-half:before{content:"\f089"}
|
||||||
|
.fa-heart-o:before{content:"\f08a"}
|
||||||
|
.fa-sign-out:before{content:"\f08b"}
|
||||||
|
.fa-linkedin-square:before{content:"\f08c"}
|
||||||
|
.fa-thumb-tack:before{content:"\f08d"}
|
||||||
|
.fa-external-link:before{content:"\f08e"}
|
||||||
|
.fa-sign-in:before{content:"\f090"}
|
||||||
|
.fa-trophy:before{content:"\f091"}
|
||||||
|
.fa-github-square:before{content:"\f092"}
|
||||||
|
.fa-upload:before{content:"\f093"}
|
||||||
|
.fa-lemon-o:before{content:"\f094"}
|
||||||
|
.fa-phone:before{content:"\f095"}
|
||||||
|
.fa-square-o:before{content:"\f096"}
|
||||||
|
.fa-bookmark-o:before{content:"\f097"}
|
||||||
|
.fa-phone-square:before{content:"\f098"}
|
||||||
|
.fa-twitter:before{content:"\f099"}
|
||||||
|
.fa-facebook-f:before,.fa-facebook:before{content:"\f09a"}
|
||||||
|
.fa-github:before{content:"\f09b"}
|
||||||
|
.fa-unlock:before{content:"\f09c"}
|
||||||
|
.fa-credit-card:before{content:"\f09d"}
|
||||||
|
.fa-rss:before{content:"\f09e"}
|
||||||
|
.fa-hdd-o:before{content:"\f0a0"}
|
||||||
|
.fa-bullhorn:before{content:"\f0a1"}
|
||||||
|
.fa-bell:before{content:"\f0f3"}
|
||||||
|
.fa-certificate:before{content:"\f0a3"}
|
||||||
|
.fa-hand-o-right:before{content:"\f0a4"}
|
||||||
|
.fa-hand-o-left:before{content:"\f0a5"}
|
||||||
|
.fa-hand-o-up:before{content:"\f0a6"}
|
||||||
|
.fa-hand-o-down:before{content:"\f0a7"}
|
||||||
|
.fa-arrow-circle-left:before{content:"\f0a8"}
|
||||||
|
.fa-arrow-circle-right:before{content:"\f0a9"}
|
||||||
|
.fa-arrow-circle-up:before{content:"\f0aa"}
|
||||||
|
.fa-arrow-circle-down:before{content:"\f0ab"}
|
||||||
|
.fa-globe:before{content:"\f0ac"}
|
||||||
|
.fa-wrench:before{content:"\f0ad"}
|
||||||
|
.fa-tasks:before{content:"\f0ae"}
|
||||||
|
.fa-filter:before{content:"\f0b0"}
|
||||||
|
.fa-briefcase:before{content:"\f0b1"}
|
||||||
|
.fa-arrows-alt:before{content:"\f0b2"}
|
||||||
|
.fa-group:before,.fa-users:before{content:"\f0c0"}
|
||||||
|
.fa-chain:before,.fa-link:before{content:"\f0c1"}
|
||||||
|
.fa-cloud:before{content:"\f0c2"}
|
||||||
|
.fa-flask:before{content:"\f0c3"}
|
||||||
|
.fa-cut:before,.fa-scissors:before{content:"\f0c4"}
|
||||||
|
.fa-copy:before,.fa-files-o:before{content:"\f0c5"}
|
||||||
|
.fa-paperclip:before{content:"\f0c6"}
|
||||||
|
.fa-save:before,.fa-floppy-o:before{content:"\f0c7"}
|
||||||
|
.fa-square:before{content:"\f0c8"}
|
||||||
|
.fa-navicon:before,.fa-reorder:before,.fa-bars:before{content:"\f0c9"}
|
||||||
|
.fa-list-ul:before{content:"\f0ca"}
|
||||||
|
.fa-list-ol:before{content:"\f0cb"}
|
||||||
|
.fa-strikethrough:before{content:"\f0cc"}
|
||||||
|
.fa-underline:before{content:"\f0cd"}
|
||||||
|
.fa-table:before{content:"\f0ce"}
|
||||||
|
.fa-magic:before{content:"\f0d0"}
|
||||||
|
.fa-truck:before{content:"\f0d1"}
|
||||||
|
.fa-pinterest:before{content:"\f0d2"}
|
||||||
|
.fa-pinterest-square:before{content:"\f0d3"}
|
||||||
|
.fa-google-plus-square:before{content:"\f0d4"}
|
||||||
|
.fa-google-plus:before{content:"\f0d5"}
|
||||||
|
.fa-money:before{content:"\f0d6"}
|
||||||
|
.fa-caret-down:before{content:"\f0d7"}
|
||||||
|
.fa-caret-up:before{content:"\f0d8"}
|
||||||
|
.fa-caret-left:before{content:"\f0d9"}
|
||||||
|
.fa-caret-right:before{content:"\f0da"}
|
||||||
|
.fa-columns:before{content:"\f0db"}
|
||||||
|
.fa-unsorted:before,.fa-sort:before{content:"\f0dc"}
|
||||||
|
.fa-sort-down:before,.fa-sort-desc:before{content:"\f0dd"}
|
||||||
|
.fa-sort-up:before,.fa-sort-asc:before{content:"\f0de"}
|
||||||
|
.fa-envelope:before{content:"\f0e0"}
|
||||||
|
.fa-linkedin:before{content:"\f0e1"}
|
||||||
|
.fa-rotate-left:before,.fa-undo:before{content:"\f0e2"}
|
||||||
|
.fa-legal:before,.fa-gavel:before{content:"\f0e3"}
|
||||||
|
.fa-dashboard:before,.fa-tachometer:before{content:"\f0e4"}
|
||||||
|
.fa-comment-o:before{content:"\f0e5"}
|
||||||
|
.fa-comments-o:before{content:"\f0e6"}
|
||||||
|
.fa-flash:before,.fa-bolt:before{content:"\f0e7"}
|
||||||
|
.fa-sitemap:before{content:"\f0e8"}
|
||||||
|
.fa-umbrella:before{content:"\f0e9"}
|
||||||
|
.fa-paste:before,.fa-clipboard:before{content:"\f0ea"}
|
||||||
|
.fa-lightbulb-o:before{content:"\f0eb"}
|
||||||
|
.fa-exchange:before{content:"\f0ec"}
|
||||||
|
.fa-cloud-download:before{content:"\f0ed"}
|
||||||
|
.fa-cloud-upload:before{content:"\f0ee"}
|
||||||
|
.fa-user-md:before{content:"\f0f0"}
|
||||||
|
.fa-stethoscope:before{content:"\f0f1"}
|
||||||
|
.fa-suitcase:before{content:"\f0f2"}
|
||||||
|
.fa-bell-o:before{content:"\f0a2"}
|
||||||
|
.fa-coffee:before{content:"\f0f4"}
|
||||||
|
.fa-cutlery:before{content:"\f0f5"}
|
||||||
|
.fa-file-text-o:before{content:"\f0f6"}
|
||||||
|
.fa-building-o:before{content:"\f0f7"}
|
||||||
|
.fa-hospital-o:before{content:"\f0f8"}
|
||||||
|
.fa-ambulance:before{content:"\f0f9"}
|
||||||
|
.fa-medkit:before{content:"\f0fa"}
|
||||||
|
.fa-fighter-jet:before{content:"\f0fb"}
|
||||||
|
.fa-beer:before{content:"\f0fc"}
|
||||||
|
.fa-h-square:before{content:"\f0fd"}
|
||||||
|
.fa-plus-square:before{content:"\f0fe"}
|
||||||
|
.fa-angle-double-left:before{content:"\f100"}
|
||||||
|
.fa-angle-double-right:before{content:"\f101"}
|
||||||
|
.fa-angle-double-up:before{content:"\f102"}
|
||||||
|
.fa-angle-double-down:before{content:"\f103"}
|
||||||
|
.fa-angle-left:before{content:"\f104"}
|
||||||
|
.fa-angle-right:before{content:"\f105"}
|
||||||
|
.fa-angle-up:before{content:"\f106"}
|
||||||
|
.fa-angle-down:before{content:"\f107"}
|
||||||
|
.fa-desktop:before{content:"\f108"}
|
||||||
|
.fa-laptop:before{content:"\f109"}
|
||||||
|
.fa-tablet:before{content:"\f10a"}
|
||||||
|
.fa-mobile-phone:before,.fa-mobile:before{content:"\f10b"}
|
||||||
|
.fa-circle-o:before{content:"\f10c"}
|
||||||
|
.fa-quote-left:before{content:"\f10d"}
|
||||||
|
.fa-quote-right:before{content:"\f10e"}
|
||||||
|
.fa-spinner:before{content:"\f110"}
|
||||||
|
.fa-circle:before{content:"\f111"}
|
||||||
|
.fa-mail-reply:before,.fa-reply:before{content:"\f112"}
|
||||||
|
.fa-github-alt:before{content:"\f113"}
|
||||||
|
.fa-folder-o:before{content:"\f114"}
|
||||||
|
.fa-folder-open-o:before{content:"\f115"}
|
||||||
|
.fa-smile-o:before{content:"\f118"}
|
||||||
|
.fa-frown-o:before{content:"\f119"}
|
||||||
|
.fa-meh-o:before{content:"\f11a"}
|
||||||
|
.fa-gamepad:before{content:"\f11b"}
|
||||||
|
.fa-keyboard-o:before{content:"\f11c"}
|
||||||
|
.fa-flag-o:before{content:"\f11d"}
|
||||||
|
.fa-flag-checkered:before{content:"\f11e"}
|
||||||
|
.fa-terminal:before{content:"\f120"}
|
||||||
|
.fa-code:before{content:"\f121"}
|
||||||
|
.fa-mail-reply-all:before,.fa-reply-all:before{content:"\f122"}
|
||||||
|
.fa-star-half-empty:before,.fa-star-half-full:before,.fa-star-half-o:before{content:"\f123"}
|
||||||
|
.fa-location-arrow:before{content:"\f124"}
|
||||||
|
.fa-crop:before{content:"\f125"}
|
||||||
|
.fa-code-fork:before{content:"\f126"}
|
||||||
|
.fa-unlink:before,.fa-chain-broken:before{content:"\f127"}
|
||||||
|
.fa-question:before{content:"\f128"}
|
||||||
|
.fa-info:before{content:"\f129"}
|
||||||
|
.fa-exclamation:before{content:"\f12a"}
|
||||||
|
.fa-superscript:before{content:"\f12b"}
|
||||||
|
.fa-subscript:before{content:"\f12c"}
|
||||||
|
.fa-eraser:before{content:"\f12d"}
|
||||||
|
.fa-puzzle-piece:before{content:"\f12e"}
|
||||||
|
.fa-microphone:before{content:"\f130"}
|
||||||
|
.fa-microphone-slash:before{content:"\f131"}
|
||||||
|
.fa-shield:before{content:"\f132"}
|
||||||
|
.fa-calendar-o:before{content:"\f133"}
|
||||||
|
.fa-fire-extinguisher:before{content:"\f134"}
|
||||||
|
.fa-rocket:before{content:"\f135"}
|
||||||
|
.fa-maxcdn:before{content:"\f136"}
|
||||||
|
.fa-chevron-circle-left:before{content:"\f137"}
|
||||||
|
.fa-chevron-circle-right:before{content:"\f138"}
|
||||||
|
.fa-chevron-circle-up:before{content:"\f139"}
|
||||||
|
.fa-chevron-circle-down:before{content:"\f13a"}
|
||||||
|
.fa-html5:before{content:"\f13b"}
|
||||||
|
.fa-css3:before{content:"\f13c"}
|
||||||
|
.fa-anchor:before{content:"\f13d"}
|
||||||
|
.fa-unlock-alt:before{content:"\f13e"}
|
||||||
|
.fa-bullseye:before{content:"\f140"}
|
||||||
|
.fa-ellipsis-h:before{content:"\f141"}
|
||||||
|
.fa-ellipsis-v:before{content:"\f142"}
|
||||||
|
.fa-rss-square:before{content:"\f143"}
|
||||||
|
.fa-play-circle:before{content:"\f144"}
|
||||||
|
.fa-ticket:before{content:"\f145"}
|
||||||
|
.fa-minus-square:before{content:"\f146"}
|
||||||
|
.fa-minus-square-o:before{content:"\f147"}
|
||||||
|
.fa-level-up:before{content:"\f148"}
|
||||||
|
.fa-level-down:before{content:"\f149"}
|
||||||
|
.fa-check-square:before{content:"\f14a"}
|
||||||
|
.fa-pencil-square:before{content:"\f14b"}
|
||||||
|
.fa-external-link-square:before{content:"\f14c"}
|
||||||
|
.fa-share-square:before{content:"\f14d"}
|
||||||
|
.fa-compass:before{content:"\f14e"}
|
||||||
|
.fa-toggle-down:before,.fa-caret-square-o-down:before{content:"\f150"}
|
||||||
|
.fa-toggle-up:before,.fa-caret-square-o-up:before{content:"\f151"}
|
||||||
|
.fa-toggle-right:before,.fa-caret-square-o-right:before{content:"\f152"}
|
||||||
|
.fa-euro:before,.fa-eur:before{content:"\f153"}
|
||||||
|
.fa-gbp:before{content:"\f154"}
|
||||||
|
.fa-dollar:before,.fa-usd:before{content:"\f155"}
|
||||||
|
.fa-rupee:before,.fa-inr:before{content:"\f156"}
|
||||||
|
.fa-cny:before,.fa-rmb:before,.fa-yen:before,.fa-jpy:before{content:"\f157"}
|
||||||
|
.fa-ruble:before,.fa-rouble:before,.fa-rub:before{content:"\f158"}
|
||||||
|
.fa-won:before,.fa-krw:before{content:"\f159"}
|
||||||
|
.fa-bitcoin:before,.fa-btc:before{content:"\f15a"}
|
||||||
|
.fa-file:before{content:"\f15b"}
|
||||||
|
.fa-file-text:before{content:"\f15c"}
|
||||||
|
.fa-sort-alpha-asc:before{content:"\f15d"}
|
||||||
|
.fa-sort-alpha-desc:before{content:"\f15e"}
|
||||||
|
.fa-sort-amount-asc:before{content:"\f160"}
|
||||||
|
.fa-sort-amount-desc:before{content:"\f161"}
|
||||||
|
.fa-sort-numeric-asc:before{content:"\f162"}
|
||||||
|
.fa-sort-numeric-desc:before{content:"\f163"}
|
||||||
|
.fa-thumbs-up:before{content:"\f164"}
|
||||||
|
.fa-thumbs-down:before{content:"\f165"}
|
||||||
|
.fa-youtube-square:before{content:"\f166"}
|
||||||
|
.fa-youtube:before{content:"\f167"}
|
||||||
|
.fa-xing:before{content:"\f168"}
|
||||||
|
.fa-xing-square:before{content:"\f169"}
|
||||||
|
.fa-youtube-play:before{content:"\f16a"}
|
||||||
|
.fa-dropbox:before{content:"\f16b"}
|
||||||
|
.fa-stack-overflow:before{content:"\f16c"}
|
||||||
|
.fa-instagram:before{content:"\f16d"}
|
||||||
|
.fa-flickr:before{content:"\f16e"}
|
||||||
|
.fa-adn:before{content:"\f170"}
|
||||||
|
.fa-bitbucket:before{content:"\f171"}
|
||||||
|
.fa-bitbucket-square:before{content:"\f172"}
|
||||||
|
.fa-tumblr:before{content:"\f173"}
|
||||||
|
.fa-tumblr-square:before{content:"\f174"}
|
||||||
|
.fa-long-arrow-down:before{content:"\f175"}
|
||||||
|
.fa-long-arrow-up:before{content:"\f176"}
|
||||||
|
.fa-long-arrow-left:before{content:"\f177"}
|
||||||
|
.fa-long-arrow-right:before{content:"\f178"}
|
||||||
|
.fa-apple:before{content:"\f179"}
|
||||||
|
.fa-windows:before{content:"\f17a"}
|
||||||
|
.fa-android:before{content:"\f17b"}
|
||||||
|
.fa-linux:before{content:"\f17c"}
|
||||||
|
.fa-dribbble:before{content:"\f17d"}
|
||||||
|
.fa-skype:before{content:"\f17e"}
|
||||||
|
.fa-foursquare:before{content:"\f180"}
|
||||||
|
.fa-trello:before{content:"\f181"}
|
||||||
|
.fa-female:before{content:"\f182"}
|
||||||
|
.fa-male:before{content:"\f183"}
|
||||||
|
.fa-gittip:before,.fa-gratipay:before{content:"\f184"}
|
||||||
|
.fa-sun-o:before{content:"\f185"}
|
||||||
|
.fa-moon-o:before{content:"\f186"}
|
||||||
|
.fa-archive:before{content:"\f187"}
|
||||||
|
.fa-bug:before{content:"\f188"}
|
||||||
|
.fa-vk:before{content:"\f189"}
|
||||||
|
.fa-weibo:before{content:"\f18a"}
|
||||||
|
.fa-renren:before{content:"\f18b"}
|
||||||
|
.fa-pagelines:before{content:"\f18c"}
|
||||||
|
.fa-stack-exchange:before{content:"\f18d"}
|
||||||
|
.fa-arrow-circle-o-right:before{content:"\f18e"}
|
||||||
|
.fa-arrow-circle-o-left:before{content:"\f190"}
|
||||||
|
.fa-toggle-left:before,.fa-caret-square-o-left:before{content:"\f191"}
|
||||||
|
.fa-dot-circle-o:before{content:"\f192"}
|
||||||
|
.fa-wheelchair:before{content:"\f193"}
|
||||||
|
.fa-vimeo-square:before{content:"\f194"}
|
||||||
|
.fa-turkish-lira:before,.fa-try:before{content:"\f195"}
|
||||||
|
.fa-plus-square-o:before{content:"\f196"}
|
||||||
|
.fa-space-shuttle:before{content:"\f197"}
|
||||||
|
.fa-slack:before{content:"\f198"}
|
||||||
|
.fa-envelope-square:before{content:"\f199"}
|
||||||
|
.fa-wordpress:before{content:"\f19a"}
|
||||||
|
.fa-openid:before{content:"\f19b"}
|
||||||
|
.fa-institution:before,.fa-bank:before,.fa-university:before{content:"\f19c"}
|
||||||
|
.fa-mortar-board:before,.fa-graduation-cap:before{content:"\f19d"}
|
||||||
|
.fa-yahoo:before{content:"\f19e"}
|
||||||
|
.fa-google:before{content:"\f1a0"}
|
||||||
|
.fa-reddit:before{content:"\f1a1"}
|
||||||
|
.fa-reddit-square:before{content:"\f1a2"}
|
||||||
|
.fa-stumbleupon-circle:before{content:"\f1a3"}
|
||||||
|
.fa-stumbleupon:before{content:"\f1a4"}
|
||||||
|
.fa-delicious:before{content:"\f1a5"}
|
||||||
|
.fa-digg:before{content:"\f1a6"}
|
||||||
|
.fa-pied-piper:before{content:"\f1a7"}
|
||||||
|
.fa-pied-piper-alt:before{content:"\f1a8"}
|
||||||
|
.fa-drupal:before{content:"\f1a9"}
|
||||||
|
.fa-joomla:before{content:"\f1aa"}
|
||||||
|
.fa-language:before{content:"\f1ab"}
|
||||||
|
.fa-fax:before{content:"\f1ac"}
|
||||||
|
.fa-building:before{content:"\f1ad"}
|
||||||
|
.fa-child:before{content:"\f1ae"}
|
||||||
|
.fa-paw:before{content:"\f1b0"}
|
||||||
|
.fa-spoon:before{content:"\f1b1"}
|
||||||
|
.fa-cube:before{content:"\f1b2"}
|
||||||
|
.fa-cubes:before{content:"\f1b3"}
|
||||||
|
.fa-behance:before{content:"\f1b4"}
|
||||||
|
.fa-behance-square:before{content:"\f1b5"}
|
||||||
|
.fa-steam:before{content:"\f1b6"}
|
||||||
|
.fa-steam-square:before{content:"\f1b7"}
|
||||||
|
.fa-recycle:before{content:"\f1b8"}
|
||||||
|
.fa-automobile:before,.fa-car:before{content:"\f1b9"}
|
||||||
|
.fa-cab:before,.fa-taxi:before{content:"\f1ba"}
|
||||||
|
.fa-tree:before{content:"\f1bb"}
|
||||||
|
.fa-spotify:before{content:"\f1bc"}
|
||||||
|
.fa-deviantart:before{content:"\f1bd"}
|
||||||
|
.fa-soundcloud:before{content:"\f1be"}
|
||||||
|
.fa-database:before{content:"\f1c0"}
|
||||||
|
.fa-file-pdf-o:before{content:"\f1c1"}
|
||||||
|
.fa-file-word-o:before{content:"\f1c2"}
|
||||||
|
.fa-file-excel-o:before{content:"\f1c3"}
|
||||||
|
.fa-file-powerpoint-o:before{content:"\f1c4"}
|
||||||
|
.fa-file-photo-o:before,.fa-file-picture-o:before,.fa-file-image-o:before{content:"\f1c5"}
|
||||||
|
.fa-file-zip-o:before,.fa-file-archive-o:before{content:"\f1c6"}
|
||||||
|
.fa-file-sound-o:before,.fa-file-audio-o:before{content:"\f1c7"}
|
||||||
|
.fa-file-movie-o:before,.fa-file-video-o:before{content:"\f1c8"}
|
||||||
|
.fa-file-code-o:before{content:"\f1c9"}
|
||||||
|
.fa-vine:before{content:"\f1ca"}
|
||||||
|
.fa-codepen:before{content:"\f1cb"}
|
||||||
|
.fa-jsfiddle:before{content:"\f1cc"}
|
||||||
|
.fa-life-bouy:before,.fa-life-buoy:before,.fa-life-saver:before,.fa-support:before,.fa-life-ring:before{content:"\f1cd"}
|
||||||
|
.fa-circle-o-notch:before{content:"\f1ce"}
|
||||||
|
.fa-ra:before,.fa-rebel:before{content:"\f1d0"}
|
||||||
|
.fa-ge:before,.fa-empire:before{content:"\f1d1"}
|
||||||
|
.fa-git-square:before{content:"\f1d2"}
|
||||||
|
.fa-git:before{content:"\f1d3"}
|
||||||
|
.fa-hacker-news:before{content:"\f1d4"}
|
||||||
|
.fa-tencent-weibo:before{content:"\f1d5"}
|
||||||
|
.fa-qq:before{content:"\f1d6"}
|
||||||
|
.fa-wechat:before,.fa-weixin:before{content:"\f1d7"}
|
||||||
|
.fa-send:before,.fa-paper-plane:before{content:"\f1d8"}
|
||||||
|
.fa-send-o:before,.fa-paper-plane-o:before{content:"\f1d9"}
|
||||||
|
.fa-history:before{content:"\f1da"}
|
||||||
|
.fa-genderless:before,.fa-circle-thin:before{content:"\f1db"}
|
||||||
|
.fa-header:before{content:"\f1dc"}
|
||||||
|
.fa-paragraph:before{content:"\f1dd"}
|
||||||
|
.fa-sliders:before{content:"\f1de"}
|
||||||
|
.fa-share-alt:before{content:"\f1e0"}
|
||||||
|
.fa-share-alt-square:before{content:"\f1e1"}
|
||||||
|
.fa-bomb:before{content:"\f1e2"}
|
||||||
|
.fa-soccer-ball-o:before,.fa-futbol-o:before{content:"\f1e3"}
|
||||||
|
.fa-tty:before{content:"\f1e4"}
|
||||||
|
.fa-binoculars:before{content:"\f1e5"}
|
||||||
|
.fa-plug:before{content:"\f1e6"}
|
||||||
|
.fa-slideshare:before{content:"\f1e7"}
|
||||||
|
.fa-twitch:before{content:"\f1e8"}
|
||||||
|
.fa-yelp:before{content:"\f1e9"}
|
||||||
|
.fa-newspaper-o:before{content:"\f1ea"}
|
||||||
|
.fa-wifi:before{content:"\f1eb"}
|
||||||
|
.fa-calculator:before{content:"\f1ec"}
|
||||||
|
.fa-paypal:before{content:"\f1ed"}
|
||||||
|
.fa-google-wallet:before{content:"\f1ee"}
|
||||||
|
.fa-cc-visa:before{content:"\f1f0"}
|
||||||
|
.fa-cc-mastercard:before{content:"\f1f1"}
|
||||||
|
.fa-cc-discover:before{content:"\f1f2"}
|
||||||
|
.fa-cc-amex:before{content:"\f1f3"}
|
||||||
|
.fa-cc-paypal:before{content:"\f1f4"}
|
||||||
|
.fa-cc-stripe:before{content:"\f1f5"}
|
||||||
|
.fa-bell-slash:before{content:"\f1f6"}
|
||||||
|
.fa-bell-slash-o:before{content:"\f1f7"}
|
||||||
|
.fa-trash:before{content:"\f1f8"}
|
||||||
|
.fa-copyright:before{content:"\f1f9"}
|
||||||
|
.fa-at:before{content:"\f1fa"}
|
||||||
|
.fa-eyedropper:before{content:"\f1fb"}
|
||||||
|
.fa-paint-brush:before{content:"\f1fc"}
|
||||||
|
.fa-birthday-cake:before{content:"\f1fd"}
|
||||||
|
.fa-area-chart:before{content:"\f1fe"}
|
||||||
|
.fa-pie-chart:before{content:"\f200"}
|
||||||
|
.fa-line-chart:before{content:"\f201"}
|
||||||
|
.fa-lastfm:before{content:"\f202"}
|
||||||
|
.fa-lastfm-square:before{content:"\f203"}
|
||||||
|
.fa-toggle-off:before{content:"\f204"}
|
||||||
|
.fa-toggle-on:before{content:"\f205"}
|
||||||
|
.fa-bicycle:before{content:"\f206"}
|
||||||
|
.fa-bus:before{content:"\f207"}
|
||||||
|
.fa-ioxhost:before{content:"\f208"}
|
||||||
|
.fa-angellist:before{content:"\f209"}
|
||||||
|
.fa-cc:before{content:"\f20a"}
|
||||||
|
.fa-shekel:before,.fa-sheqel:before,.fa-ils:before{content:"\f20b"}
|
||||||
|
.fa-meanpath:before{content:"\f20c"}
|
||||||
|
.fa-buysellads:before{content:"\f20d"}
|
||||||
|
.fa-connectdevelop:before{content:"\f20e"}
|
||||||
|
.fa-dashcube:before{content:"\f210"}
|
||||||
|
.fa-forumbee:before{content:"\f211"}
|
||||||
|
.fa-leanpub:before{content:"\f212"}
|
||||||
|
.fa-sellsy:before{content:"\f213"}
|
||||||
|
.fa-shirtsinbulk:before{content:"\f214"}
|
||||||
|
.fa-simplybuilt:before{content:"\f215"}
|
||||||
|
.fa-skyatlas:before{content:"\f216"}
|
||||||
|
.fa-cart-plus:before{content:"\f217"}
|
||||||
|
.fa-cart-arrow-down:before{content:"\f218"}
|
||||||
|
.fa-diamond:before{content:"\f219"}
|
||||||
|
.fa-ship:before{content:"\f21a"}
|
||||||
|
.fa-user-secret:before{content:"\f21b"}
|
||||||
|
.fa-motorcycle:before{content:"\f21c"}
|
||||||
|
.fa-street-view:before{content:"\f21d"}
|
||||||
|
.fa-heartbeat:before{content:"\f21e"}
|
||||||
|
.fa-venus:before{content:"\f221"}
|
||||||
|
.fa-mars:before{content:"\f222"}
|
||||||
|
.fa-mercury:before{content:"\f223"}
|
||||||
|
.fa-transgender:before{content:"\f224"}
|
||||||
|
.fa-transgender-alt:before{content:"\f225"}
|
||||||
|
.fa-venus-double:before{content:"\f226"}
|
||||||
|
.fa-mars-double:before{content:"\f227"}
|
||||||
|
.fa-venus-mars:before{content:"\f228"}
|
||||||
|
.fa-mars-stroke:before{content:"\f229"}
|
||||||
|
.fa-mars-stroke-v:before{content:"\f22a"}
|
||||||
|
.fa-mars-stroke-h:before{content:"\f22b"}
|
||||||
|
.fa-neuter:before{content:"\f22c"}
|
||||||
|
.fa-facebook-official:before{content:"\f230"}
|
||||||
|
.fa-pinterest-p:before{content:"\f231"}
|
||||||
|
.fa-whatsapp:before{content:"\f232"}
|
||||||
|
.fa-server:before{content:"\f233"}
|
||||||
|
.fa-user-plus:before{content:"\f234"}
|
||||||
|
.fa-user-times:before{content:"\f235"}
|
||||||
|
.fa-hotel:before,.fa-bed:before{content:"\f236"}
|
||||||
|
.fa-viacoin:before{content:"\f237"}
|
||||||
|
.fa-train:before{content:"\f238"}
|
||||||
|
.fa-subway:before{content:"\f239"}
|
||||||
|
.fa-medium:before{content:"\f23a"}
|
||||||
4
RadioSonde_FSK/version.h
Executable file
4
RadioSonde_FSK/version.h
Executable file
|
|
@ -0,0 +1,4 @@
|
||||||
|
const char *version_name = "RadioSonde";
|
||||||
|
const char *version_id = "0.8.5";
|
||||||
|
const int SPIFFS_MAJOR=2;
|
||||||
|
const int SPIFFS_MINOR=4;
|
||||||
101
Setup.md
Executable file
101
Setup.md
Executable file
|
|
@ -0,0 +1,101 @@
|
||||||
|
# Près-requis
|
||||||
|
<img src="http://xavier.debert.free.fr/RS/TTGO2.jpg" width="50%">
|
||||||
|
|
||||||
|
|
||||||
|
## Arduino IDE
|
||||||
|
|
||||||
|
Avoir une version à jour exemple 1.8.13(juillet2020)
|
||||||
|
|
||||||
|
## ESP32 support
|
||||||
|
|
||||||
|
Fichier -> Préférences
|
||||||
|
|
||||||
|
en bas dans la case "URL de gestionnaire de cartes supplémentaires"
|
||||||
|
|
||||||
|
Ajouter *https://dl.espressif.com/dl/package_esp32_index.json* et appuier sur oK
|
||||||
|
|
||||||
|
Puis dans Outils
|
||||||
|
Outils -> type de cartes -> Gestionnaire de cartes
|
||||||
|
|
||||||
|
dans la case de recherche taper "esp32"
|
||||||
|
|
||||||
|
Installer "esp32 by Espressif Systems"
|
||||||
|
|
||||||
|
Puis après
|
||||||
|
|
||||||
|
## ESP32 Flash Filesystem Upload support
|
||||||
|
|
||||||
|
Télécharger le fichier zip de la dernière version
|
||||||
|
https://github.com/me-no-dev/arduino-esp32fs-plugin/releases/
|
||||||
|
|
||||||
|
Décompresser l'archive dans le répértoire tools de votre Arduino IDE
|
||||||
|
|
||||||
|
## Ajouter les bibliothèques
|
||||||
|
|
||||||
|
Séléctionner Outils -> Gestionnaire de bibliothèques
|
||||||
|
|
||||||
|
Installer "U8g2"
|
||||||
|
|
||||||
|
Installer "MicroNMEA"
|
||||||
|
|
||||||
|
Installer "TFT_22_ILI9225" nécessaire pas pour l'écran car j'ai tout supprimé
|
||||||
|
mais pour les fonts, car le TTGO fonctionne avec OLED SSD1306 par défaut!
|
||||||
|
|
||||||
|
|
||||||
|
## Ajouter les bibliothèques, parties 2
|
||||||
|
|
||||||
|
Depuis https://github.com/me-no-dev/ESPAsyncWebServer télécharger le ZIP , l'extraire dans "libraries"
|
||||||
|
, renommer le répertoire en ESPAsyncWebServer (supprimer juste "-master")
|
||||||
|
|
||||||
|
Depuis https://github.com/me-no-dev/AsyncTCP télécharger le ZIP, l'extraire dans "libraries", et renommer le répertoire en AsyncTCP
|
||||||
|
|
||||||
|
de même pour https://github.com/lewisxhe/AXP202X_Library télécharger le ZIP, l'extraire dans "libraries", et renommer le répertoire en AXP202X_Library
|
||||||
|
|
||||||
|
|
||||||
|
## Ajouter les bibliothèques, parties 3
|
||||||
|
|
||||||
|
Copier libraries/SX1278FSK
|
||||||
|
et libraries/SondeLib
|
||||||
|
et libraries/fonts
|
||||||
|
|
||||||
|
fourni dans libraries
|
||||||
|
|
||||||
|
|
||||||
|
```
|
||||||
|
ou sous Linux un lien symbolique est aussi possible mais pas obligatoire!
|
||||||
|
cd ~/Arduino/libraries
|
||||||
|
ln -s <whereyouclonedthegit>/radiosonde/libraries/SondeLib/ .
|
||||||
|
ln -s <whereyouclonedthegit>/radiosonde/libraries/SX1278FSK/ .
|
||||||
|
```
|
||||||
|
Redémarrer Arduino IDE
|
||||||
|
|
||||||
|
## Ajout carte esp32
|
||||||
|
|
||||||
|
Allez dans Outils-> type de cartes -> gestionnaire de cartes
|
||||||
|
|
||||||
|
puis dans la case taper esp32 et Installer.
|
||||||
|
|
||||||
|
## Dernière parties
|
||||||
|
|
||||||
|
Dans Outils -> Esp32 arduino: ->
|
||||||
|
Séléctionner "TTGO LoRa32-OLED v1"
|
||||||
|
|
||||||
|
Puis il vous faut ouvrir le fichier
|
||||||
|
RadioSonde_FSK.ino
|
||||||
|
|
||||||
|
Compiler et Téléverser le dans votre TTGO
|
||||||
|
|
||||||
|
puis il faut téléverser maintenant les DATA!
|
||||||
|
|
||||||
|
Dans Outils
|
||||||
|
cliquer sur ESP32 Sketch Data Upload
|
||||||
|
|
||||||
|
voila le TTGO est prêt!
|
||||||
|
|
||||||
|
Pour les futur mise à jour,
|
||||||
|
j'ai prévue une mise à jour directe via OTA depuis le TTGO donc
|
||||||
|
s'il est connecté à internet depuis votre Smartphone ou votre Box.
|
||||||
|
Cela se fera depuis le menu de la page Web.
|
||||||
|
73
|
||||||
|
Xavier
|
||||||
|
|
||||||
BIN
ant_cju.jpg
Executable file
BIN
ant_cju.jpg
Executable file
Binary file not shown.
|
After Width: | Height: | Size: 21 KiB |
89
libraries/SD/.travis.yml
Executable file
89
libraries/SD/.travis.yml
Executable file
|
|
@ -0,0 +1,89 @@
|
||||||
|
# default language
|
||||||
|
language: generic
|
||||||
|
|
||||||
|
env:
|
||||||
|
global:
|
||||||
|
- CLI_VERSION=latest
|
||||||
|
|
||||||
|
matrix:
|
||||||
|
include:
|
||||||
|
# compile example sketches for the following boards
|
||||||
|
- env:
|
||||||
|
- BOARD='arduino:avr:mega:cpu=atmega2560'
|
||||||
|
install:
|
||||||
|
- arduino-cli core install arduino:avr
|
||||||
|
|
||||||
|
- env:
|
||||||
|
- BOARD='arduino:samd:mkrzero'
|
||||||
|
install:
|
||||||
|
- arduino-cli core install arduino:samd
|
||||||
|
|
||||||
|
- env:
|
||||||
|
- BOARD='arduino:megaavr:uno2018:mode=on'
|
||||||
|
install:
|
||||||
|
- arduino-cli core install arduino:megaavr
|
||||||
|
|
||||||
|
- env:
|
||||||
|
- BOARD='arduino:sam:arduino_due_x'
|
||||||
|
install:
|
||||||
|
- arduino-cli core install arduino:sam
|
||||||
|
|
||||||
|
# check all code files for compliance with the Arduino code formatting style
|
||||||
|
- env:
|
||||||
|
- NAME='Code Formatting Check'
|
||||||
|
language: minimal
|
||||||
|
before_install:
|
||||||
|
# install Artistic Style code formatter tool: http://astyle.sourceforge.net
|
||||||
|
- |
|
||||||
|
mkdir "${HOME}/astyle";
|
||||||
|
wget --no-verbose --output-document="${HOME}/astyle/astyle.tar.gz" "https://iweb.dl.sourceforge.net/project/astyle/astyle/astyle%203.1/astyle_3.1_linux.tar.gz";
|
||||||
|
tar --extract --file="${HOME}/astyle/astyle.tar.gz" --directory="${HOME}/astyle";
|
||||||
|
cd "${HOME}/astyle/astyle/build/gcc";
|
||||||
|
make;
|
||||||
|
export PATH="$PWD/bin:$PATH";
|
||||||
|
cd "$TRAVIS_BUILD_DIR"
|
||||||
|
# download Arduino's Artistic Style configuration file
|
||||||
|
- wget --directory-prefix="${HOME}/astyle" https://raw.githubusercontent.com/arduino/Arduino/master/build/shared/examples_formatter.conf
|
||||||
|
script:
|
||||||
|
# check code formatting
|
||||||
|
- find . -regextype posix-extended -path './.git' -prune -or \( -iregex '.*\.((ino)|(h)|(hpp)|(hh)|(hxx)|(h\+\+)|(cpp)|(cc)|(cxx)|(c\+\+)|(cp)|(c)|(ipp)|(ii)|(ixx)|(inl)|(tpp)|(txx)|(tpl))$' -and -type f \) -print0 | xargs -0 -L1 bash -c 'if ! diff "$0" <(astyle --options=${HOME}/astyle/examples_formatter.conf --dry-run < "$0"); then echo "Non-compliant code formatting in $0"; false; fi'
|
||||||
|
|
||||||
|
# check all files for commonly misspelled words
|
||||||
|
- env:
|
||||||
|
- NAME='Spell Check'
|
||||||
|
language: python
|
||||||
|
python: 3.6
|
||||||
|
before_install:
|
||||||
|
# https://github.com/codespell-project/codespell
|
||||||
|
- pip install codespell
|
||||||
|
script:
|
||||||
|
# codespell will ignore any words in extras/codespell-ignore-words-list.txt, which may be used to fix false positives
|
||||||
|
- codespell --skip="${TRAVIS_BUILD_DIR}/.git" --ignore-words="${TRAVIS_BUILD_DIR}/extras/codespell-ignore-words-list.txt" "${TRAVIS_BUILD_DIR}"
|
||||||
|
|
||||||
|
# default phases shared by the compilation tests
|
||||||
|
before_install:
|
||||||
|
- wget http://downloads.arduino.cc/arduino-cli/arduino-cli-$CLI_VERSION-linux64.tar.bz2
|
||||||
|
- tar xf arduino-cli-$CLI_VERSION-linux64.tar.bz2
|
||||||
|
- mkdir -p "$HOME/bin"
|
||||||
|
- mv arduino-cli "$HOME/bin"
|
||||||
|
- export PATH="$PATH:$HOME/bin"
|
||||||
|
- arduino-cli core update-index
|
||||||
|
- buildExampleSketch() { arduino-cli compile --verbose --warnings all --fqbn $BOARD "$PWD/examples/$1"; }
|
||||||
|
- mkdir -p "$HOME/Arduino/libraries"
|
||||||
|
- ln -s "$PWD" "$HOME/Arduino/libraries/."
|
||||||
|
|
||||||
|
script:
|
||||||
|
- buildExampleSketch CardInfo
|
||||||
|
- buildExampleSketch Datalogger
|
||||||
|
- buildExampleSketch DumpFile
|
||||||
|
- buildExampleSketch Files
|
||||||
|
- buildExampleSketch listfiles
|
||||||
|
- buildExampleSketch ReadWrite
|
||||||
|
|
||||||
|
notifications:
|
||||||
|
webhooks:
|
||||||
|
# use TravisBuddy to comment on any pull request that results in a failed CI build
|
||||||
|
urls:
|
||||||
|
- https://www.travisbuddy.com/
|
||||||
|
on_success: never
|
||||||
|
on_failure: always
|
||||||
26
libraries/SD/README.adoc
Executable file
26
libraries/SD/README.adoc
Executable file
|
|
@ -0,0 +1,26 @@
|
||||||
|
= SD Library for Arduino =
|
||||||
|
|
||||||
|
image:https://travis-ci.org/arduino-libraries/SD.svg?branch=master[Build Status, link=https://travis-ci.org/arduino-libraries/SD]
|
||||||
|
|
||||||
|
The SD library allows for reading from and writing to SD cards.
|
||||||
|
|
||||||
|
For more information about this library please visit us at
|
||||||
|
http://www.arduino.cc/en/Reference/SD
|
||||||
|
|
||||||
|
== License ==
|
||||||
|
|
||||||
|
Copyright (C) 2009 by William Greiman
|
||||||
|
Copyright (c) 2010 SparkFun Electronics
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 3 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
116
libraries/SD/examples/CardInfo/CardInfo.ino
Executable file
116
libraries/SD/examples/CardInfo/CardInfo.ino
Executable file
|
|
@ -0,0 +1,116 @@
|
||||||
|
/*
|
||||||
|
SD card test
|
||||||
|
|
||||||
|
This example shows how use the utility libraries on which the'
|
||||||
|
SD library is based in order to get info about your SD card.
|
||||||
|
Very useful for testing a card when you're not sure whether its working or not.
|
||||||
|
|
||||||
|
The circuit:
|
||||||
|
SD card attached to SPI bus as follows:
|
||||||
|
** MOSI - pin 11 on Arduino Uno/Duemilanove/Diecimila
|
||||||
|
** MISO - pin 12 on Arduino Uno/Duemilanove/Diecimila
|
||||||
|
** CLK - pin 13 on Arduino Uno/Duemilanove/Diecimila
|
||||||
|
** CS - depends on your SD card shield or module.
|
||||||
|
Pin 4 used here for consistency with other Arduino examples
|
||||||
|
|
||||||
|
|
||||||
|
created 28 Mar 2011
|
||||||
|
by Limor Fried
|
||||||
|
modified 9 Apr 2012
|
||||||
|
by Tom Igoe
|
||||||
|
*/
|
||||||
|
// include the SD library:
|
||||||
|
#include <SPI.h>
|
||||||
|
#include <SD.h>
|
||||||
|
|
||||||
|
// set up variables using the SD utility library functions:
|
||||||
|
Sd2Card card;
|
||||||
|
SdVolume volume;
|
||||||
|
SdFile root;
|
||||||
|
|
||||||
|
// change this to match your SD shield or module;
|
||||||
|
// Arduino Ethernet shield: pin 4
|
||||||
|
// Adafruit SD shields and modules: pin 10
|
||||||
|
// Sparkfun SD shield: pin 8
|
||||||
|
// MKRZero SD: SDCARD_SS_PIN
|
||||||
|
const int chipSelect = 4;
|
||||||
|
|
||||||
|
void setup() {
|
||||||
|
// Open serial communications and wait for port to open:
|
||||||
|
Serial.begin(9600);
|
||||||
|
while (!Serial) {
|
||||||
|
; // wait for serial port to connect. Needed for native USB port only
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
Serial.print("\nInitializing SD card...");
|
||||||
|
|
||||||
|
// we'll use the initialization code from the utility libraries
|
||||||
|
// since we're just testing if the card is working!
|
||||||
|
if (!card.init(SPI_HALF_SPEED, chipSelect)) {
|
||||||
|
Serial.println("initialization failed. Things to check:");
|
||||||
|
Serial.println("* is a card inserted?");
|
||||||
|
Serial.println("* is your wiring correct?");
|
||||||
|
Serial.println("* did you change the chipSelect pin to match your shield or module?");
|
||||||
|
while (1);
|
||||||
|
} else {
|
||||||
|
Serial.println("Wiring is correct and a card is present.");
|
||||||
|
}
|
||||||
|
|
||||||
|
// print the type of card
|
||||||
|
Serial.println();
|
||||||
|
Serial.print("Card type: ");
|
||||||
|
switch (card.type()) {
|
||||||
|
case SD_CARD_TYPE_SD1:
|
||||||
|
Serial.println("SD1");
|
||||||
|
break;
|
||||||
|
case SD_CARD_TYPE_SD2:
|
||||||
|
Serial.println("SD2");
|
||||||
|
break;
|
||||||
|
case SD_CARD_TYPE_SDHC:
|
||||||
|
Serial.println("SDHC");
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
Serial.println("Unknown");
|
||||||
|
}
|
||||||
|
|
||||||
|
// Now we will try to open the 'volume'/'partition' - it should be FAT16 or FAT32
|
||||||
|
if (!volume.init(card)) {
|
||||||
|
Serial.println("Could not find FAT16/FAT32 partition.\nMake sure you've formatted the card");
|
||||||
|
while (1);
|
||||||
|
}
|
||||||
|
|
||||||
|
Serial.print("Clusters: ");
|
||||||
|
Serial.println(volume.clusterCount());
|
||||||
|
Serial.print("Blocks x Cluster: ");
|
||||||
|
Serial.println(volume.blocksPerCluster());
|
||||||
|
|
||||||
|
Serial.print("Total Blocks: ");
|
||||||
|
Serial.println(volume.blocksPerCluster() * volume.clusterCount());
|
||||||
|
Serial.println();
|
||||||
|
|
||||||
|
// print the type and size of the first FAT-type volume
|
||||||
|
uint32_t volumesize;
|
||||||
|
Serial.print("Volume type is: FAT");
|
||||||
|
Serial.println(volume.fatType(), DEC);
|
||||||
|
|
||||||
|
volumesize = volume.blocksPerCluster(); // clusters are collections of blocks
|
||||||
|
volumesize *= volume.clusterCount(); // we'll have a lot of clusters
|
||||||
|
volumesize /= 2; // SD card blocks are always 512 bytes (2 blocks are 1KB)
|
||||||
|
Serial.print("Volume size (Kb): ");
|
||||||
|
Serial.println(volumesize);
|
||||||
|
Serial.print("Volume size (Mb): ");
|
||||||
|
volumesize /= 1024;
|
||||||
|
Serial.println(volumesize);
|
||||||
|
Serial.print("Volume size (Gb): ");
|
||||||
|
Serial.println((float)volumesize / 1024.0);
|
||||||
|
|
||||||
|
Serial.println("\nFiles found on the card (name, date and size in bytes): ");
|
||||||
|
root.openRoot(volume);
|
||||||
|
|
||||||
|
// list all files in the card with date and size
|
||||||
|
root.ls(LS_R | LS_DATE | LS_SIZE);
|
||||||
|
}
|
||||||
|
|
||||||
|
void loop(void) {
|
||||||
|
}
|
||||||
84
libraries/SD/examples/Datalogger/Datalogger.ino
Executable file
84
libraries/SD/examples/Datalogger/Datalogger.ino
Executable file
|
|
@ -0,0 +1,84 @@
|
||||||
|
/*
|
||||||
|
SD card datalogger
|
||||||
|
|
||||||
|
This example shows how to log data from three analog sensors
|
||||||
|
to an SD card using the SD library.
|
||||||
|
|
||||||
|
The circuit:
|
||||||
|
analog sensors on analog ins 0, 1, and 2
|
||||||
|
SD card attached to SPI bus as follows:
|
||||||
|
** MOSI - pin 11
|
||||||
|
** MISO - pin 12
|
||||||
|
** CLK - pin 13
|
||||||
|
** CS - pin 4 (for MKRZero SD: SDCARD_SS_PIN)
|
||||||
|
|
||||||
|
created 24 Nov 2010
|
||||||
|
modified 9 Apr 2012
|
||||||
|
by Tom Igoe
|
||||||
|
|
||||||
|
This example code is in the public domain.
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <SPI.h>
|
||||||
|
#include <SD.h>
|
||||||
|
|
||||||
|
const int chipSelect = 4;
|
||||||
|
|
||||||
|
void setup() {
|
||||||
|
// Open serial communications and wait for port to open:
|
||||||
|
Serial.begin(9600);
|
||||||
|
while (!Serial) {
|
||||||
|
; // wait for serial port to connect. Needed for native USB port only
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
Serial.print("Initializing SD card...");
|
||||||
|
|
||||||
|
// see if the card is present and can be initialized:
|
||||||
|
if (!SD.begin(chipSelect)) {
|
||||||
|
Serial.println("Card failed, or not present");
|
||||||
|
// don't do anything more:
|
||||||
|
while (1);
|
||||||
|
}
|
||||||
|
Serial.println("card initialized.");
|
||||||
|
}
|
||||||
|
|
||||||
|
void loop() {
|
||||||
|
// make a string for assembling the data to log:
|
||||||
|
String dataString = "";
|
||||||
|
|
||||||
|
// read three sensors and append to the string:
|
||||||
|
for (int analogPin = 0; analogPin < 3; analogPin++) {
|
||||||
|
int sensor = analogRead(analogPin);
|
||||||
|
dataString += String(sensor);
|
||||||
|
if (analogPin < 2) {
|
||||||
|
dataString += ",";
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
// open the file. note that only one file can be open at a time,
|
||||||
|
// so you have to close this one before opening another.
|
||||||
|
File dataFile = SD.open("datalog.txt", FILE_WRITE);
|
||||||
|
|
||||||
|
// if the file is available, write to it:
|
||||||
|
if (dataFile) {
|
||||||
|
dataFile.println(dataString);
|
||||||
|
dataFile.close();
|
||||||
|
// print to the serial port too:
|
||||||
|
Serial.println(dataString);
|
||||||
|
}
|
||||||
|
// if the file isn't open, pop up an error:
|
||||||
|
else {
|
||||||
|
Serial.println("error opening datalog.txt");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
65
libraries/SD/examples/DumpFile/DumpFile.ino
Executable file
65
libraries/SD/examples/DumpFile/DumpFile.ino
Executable file
|
|
@ -0,0 +1,65 @@
|
||||||
|
/*
|
||||||
|
SD card file dump
|
||||||
|
|
||||||
|
This example shows how to read a file from the SD card using the
|
||||||
|
SD library and send it over the serial port.
|
||||||
|
|
||||||
|
The circuit:
|
||||||
|
SD card attached to SPI bus as follows:
|
||||||
|
** MOSI - pin 11
|
||||||
|
** MISO - pin 12
|
||||||
|
** CLK - pin 13
|
||||||
|
** CS - pin 4 (for MKRZero SD: SDCARD_SS_PIN)
|
||||||
|
|
||||||
|
created 22 December 2010
|
||||||
|
by Limor Fried
|
||||||
|
modified 9 Apr 2012
|
||||||
|
by Tom Igoe
|
||||||
|
|
||||||
|
This example code is in the public domain.
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <SPI.h>
|
||||||
|
#include <SD.h>
|
||||||
|
|
||||||
|
const int chipSelect = 4;
|
||||||
|
|
||||||
|
void setup() {
|
||||||
|
// Open serial communications and wait for port to open:
|
||||||
|
Serial.begin(9600);
|
||||||
|
while (!Serial) {
|
||||||
|
; // wait for serial port to connect. Needed for native USB port only
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
Serial.print("Initializing SD card...");
|
||||||
|
|
||||||
|
// see if the card is present and can be initialized:
|
||||||
|
if (!SD.begin(chipSelect)) {
|
||||||
|
Serial.println("Card failed, or not present");
|
||||||
|
// don't do anything more:
|
||||||
|
while (1);
|
||||||
|
}
|
||||||
|
Serial.println("card initialized.");
|
||||||
|
|
||||||
|
// open the file. note that only one file can be open at a time,
|
||||||
|
// so you have to close this one before opening another.
|
||||||
|
File dataFile = SD.open("datalog.txt");
|
||||||
|
|
||||||
|
// if the file is available, write to it:
|
||||||
|
if (dataFile) {
|
||||||
|
while (dataFile.available()) {
|
||||||
|
Serial.write(dataFile.read());
|
||||||
|
}
|
||||||
|
dataFile.close();
|
||||||
|
}
|
||||||
|
// if the file isn't open, pop up an error:
|
||||||
|
else {
|
||||||
|
Serial.println("error opening datalog.txt");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void loop() {
|
||||||
|
}
|
||||||
|
|
||||||
75
libraries/SD/examples/Files/Files.ino
Executable file
75
libraries/SD/examples/Files/Files.ino
Executable file
|
|
@ -0,0 +1,75 @@
|
||||||
|
/*
|
||||||
|
SD card basic file example
|
||||||
|
|
||||||
|
This example shows how to create and destroy an SD card file
|
||||||
|
The circuit:
|
||||||
|
SD card attached to SPI bus as follows:
|
||||||
|
** MOSI - pin 11
|
||||||
|
** MISO - pin 12
|
||||||
|
** CLK - pin 13
|
||||||
|
** CS - pin 4 (for MKRZero SD: SDCARD_SS_PIN)
|
||||||
|
|
||||||
|
created Nov 2010
|
||||||
|
by David A. Mellis
|
||||||
|
modified 9 Apr 2012
|
||||||
|
by Tom Igoe
|
||||||
|
|
||||||
|
This example code is in the public domain.
|
||||||
|
|
||||||
|
*/
|
||||||
|
#include <SPI.h>
|
||||||
|
#include <SD.h>
|
||||||
|
|
||||||
|
File myFile;
|
||||||
|
|
||||||
|
void setup() {
|
||||||
|
// Open serial communications and wait for port to open:
|
||||||
|
Serial.begin(9600);
|
||||||
|
while (!Serial) {
|
||||||
|
; // wait for serial port to connect. Needed for native USB port only
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
Serial.print("Initializing SD card...");
|
||||||
|
|
||||||
|
if (!SD.begin(4)) {
|
||||||
|
Serial.println("initialization failed!");
|
||||||
|
while (1);
|
||||||
|
}
|
||||||
|
Serial.println("initialization done.");
|
||||||
|
|
||||||
|
if (SD.exists("example.txt")) {
|
||||||
|
Serial.println("example.txt exists.");
|
||||||
|
} else {
|
||||||
|
Serial.println("example.txt doesn't exist.");
|
||||||
|
}
|
||||||
|
|
||||||
|
// open a new file and immediately close it:
|
||||||
|
Serial.println("Creating example.txt...");
|
||||||
|
myFile = SD.open("example.txt", FILE_WRITE);
|
||||||
|
myFile.close();
|
||||||
|
|
||||||
|
// Check to see if the file exists:
|
||||||
|
if (SD.exists("example.txt")) {
|
||||||
|
Serial.println("example.txt exists.");
|
||||||
|
} else {
|
||||||
|
Serial.println("example.txt doesn't exist.");
|
||||||
|
}
|
||||||
|
|
||||||
|
// delete the file:
|
||||||
|
Serial.println("Removing example.txt...");
|
||||||
|
SD.remove("example.txt");
|
||||||
|
|
||||||
|
if (SD.exists("example.txt")) {
|
||||||
|
Serial.println("example.txt exists.");
|
||||||
|
} else {
|
||||||
|
Serial.println("example.txt doesn't exist.");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void loop() {
|
||||||
|
// nothing happens after setup finishes.
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
91
libraries/SD/examples/NonBlockingWrite/NonBlockingWrite.ino
Executable file
91
libraries/SD/examples/NonBlockingWrite/NonBlockingWrite.ino
Executable file
|
|
@ -0,0 +1,91 @@
|
||||||
|
/*
|
||||||
|
Non-blocking Write
|
||||||
|
|
||||||
|
This example demonstrates how to perform non-blocking writes
|
||||||
|
to a file on a SD card. The file will contain the current millis()
|
||||||
|
value every 10ms. If the SD card is busy, the data will be buffered
|
||||||
|
in order to not block the sketch.
|
||||||
|
|
||||||
|
NOTE: myFile.availableForWrite() will automatically sync the
|
||||||
|
file contents as needed. You may lose some unsynced data
|
||||||
|
still if myFile.sync() or myFile.close() is not called.
|
||||||
|
|
||||||
|
The circuit:
|
||||||
|
- Arduino MKR Zero board
|
||||||
|
- micro SD card attached
|
||||||
|
|
||||||
|
This example code is in the public domain.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <SD.h>
|
||||||
|
|
||||||
|
// file name to use for writing
|
||||||
|
const char filename[] = "demo.txt";
|
||||||
|
|
||||||
|
// File object to represent file
|
||||||
|
File txtFile;
|
||||||
|
|
||||||
|
// string to buffer output
|
||||||
|
String buffer;
|
||||||
|
|
||||||
|
unsigned long lastMillis = 0;
|
||||||
|
|
||||||
|
void setup() {
|
||||||
|
Serial.begin(9600);
|
||||||
|
while (!Serial);
|
||||||
|
|
||||||
|
// reserve 1kB for String used as a buffer
|
||||||
|
buffer.reserve(1024);
|
||||||
|
|
||||||
|
// set LED pin to output, used to blink when writing
|
||||||
|
pinMode(LED_BUILTIN, OUTPUT);
|
||||||
|
|
||||||
|
// init the SD card
|
||||||
|
if (!SD.begin()) {
|
||||||
|
Serial.println("Card failed, or not present");
|
||||||
|
// don't do anything more:
|
||||||
|
while (1);
|
||||||
|
}
|
||||||
|
|
||||||
|
// If you want to start from an empty file,
|
||||||
|
// uncomment the next line:
|
||||||
|
// SD.remove(filename);
|
||||||
|
|
||||||
|
// try to open the file for writing
|
||||||
|
txtFile = SD.open(filename, FILE_WRITE);
|
||||||
|
if (!txtFile) {
|
||||||
|
Serial.print("error opening ");
|
||||||
|
Serial.println(filename);
|
||||||
|
while (1);
|
||||||
|
}
|
||||||
|
|
||||||
|
// add some new lines to start
|
||||||
|
txtFile.println();
|
||||||
|
txtFile.println("Hello World!");
|
||||||
|
}
|
||||||
|
|
||||||
|
void loop() {
|
||||||
|
// check if it's been over 10 ms since the last line added
|
||||||
|
unsigned long now = millis();
|
||||||
|
if ((now - lastMillis) >= 10) {
|
||||||
|
// add a new line to the buffer
|
||||||
|
buffer += "Hello ";
|
||||||
|
buffer += now;
|
||||||
|
buffer += "\r\n";
|
||||||
|
|
||||||
|
lastMillis = now;
|
||||||
|
}
|
||||||
|
|
||||||
|
// check if the SD card is available to write data without blocking
|
||||||
|
// and if the buffered data is enough for the full chunk size
|
||||||
|
unsigned int chunkSize = txtFile.availableForWrite();
|
||||||
|
if (chunkSize && buffer.length() >= chunkSize) {
|
||||||
|
// write to file and blink LED
|
||||||
|
digitalWrite(LED_BUILTIN, HIGH);
|
||||||
|
txtFile.write(buffer.c_str(), chunkSize);
|
||||||
|
digitalWrite(LED_BUILTIN, LOW);
|
||||||
|
|
||||||
|
// remove written data from buffer
|
||||||
|
buffer.remove(0, chunkSize);
|
||||||
|
}
|
||||||
|
}
|
||||||
79
libraries/SD/examples/ReadWrite/ReadWrite.ino
Executable file
79
libraries/SD/examples/ReadWrite/ReadWrite.ino
Executable file
|
|
@ -0,0 +1,79 @@
|
||||||
|
/*
|
||||||
|
SD card read/write
|
||||||
|
|
||||||
|
This example shows how to read and write data to and from an SD card file
|
||||||
|
The circuit:
|
||||||
|
SD card attached to SPI bus as follows:
|
||||||
|
** MOSI - pin 11
|
||||||
|
** MISO - pin 12
|
||||||
|
** CLK - pin 13
|
||||||
|
** CS - pin 4 (for MKRZero SD: SDCARD_SS_PIN)
|
||||||
|
|
||||||
|
created Nov 2010
|
||||||
|
by David A. Mellis
|
||||||
|
modified 9 Apr 2012
|
||||||
|
by Tom Igoe
|
||||||
|
|
||||||
|
This example code is in the public domain.
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <SPI.h>
|
||||||
|
#include <SD.h>
|
||||||
|
|
||||||
|
File myFile;
|
||||||
|
|
||||||
|
void setup() {
|
||||||
|
// Open serial communications and wait for port to open:
|
||||||
|
Serial.begin(9600);
|
||||||
|
while (!Serial) {
|
||||||
|
; // wait for serial port to connect. Needed for native USB port only
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
Serial.print("Initializing SD card...");
|
||||||
|
|
||||||
|
if (!SD.begin(4)) {
|
||||||
|
Serial.println("initialization failed!");
|
||||||
|
while (1);
|
||||||
|
}
|
||||||
|
Serial.println("initialization done.");
|
||||||
|
|
||||||
|
// open the file. note that only one file can be open at a time,
|
||||||
|
// so you have to close this one before opening another.
|
||||||
|
myFile = SD.open("test.txt", FILE_WRITE);
|
||||||
|
|
||||||
|
// if the file opened okay, write to it:
|
||||||
|
if (myFile) {
|
||||||
|
Serial.print("Writing to test.txt...");
|
||||||
|
myFile.println("testing 1, 2, 3.");
|
||||||
|
// close the file:
|
||||||
|
myFile.close();
|
||||||
|
Serial.println("done.");
|
||||||
|
} else {
|
||||||
|
// if the file didn't open, print an error:
|
||||||
|
Serial.println("error opening test.txt");
|
||||||
|
}
|
||||||
|
|
||||||
|
// re-open the file for reading:
|
||||||
|
myFile = SD.open("test.txt");
|
||||||
|
if (myFile) {
|
||||||
|
Serial.println("test.txt:");
|
||||||
|
|
||||||
|
// read from the file until there's nothing else in it:
|
||||||
|
while (myFile.available()) {
|
||||||
|
Serial.write(myFile.read());
|
||||||
|
}
|
||||||
|
// close the file:
|
||||||
|
myFile.close();
|
||||||
|
} else {
|
||||||
|
// if the file didn't open, print an error:
|
||||||
|
Serial.println("error opening test.txt");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void loop() {
|
||||||
|
// nothing happens after setup
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
80
libraries/SD/examples/listfiles/listfiles.ino
Executable file
80
libraries/SD/examples/listfiles/listfiles.ino
Executable file
|
|
@ -0,0 +1,80 @@
|
||||||
|
/*
|
||||||
|
Listfiles
|
||||||
|
|
||||||
|
This example shows how print out the files in a
|
||||||
|
directory on a SD card
|
||||||
|
|
||||||
|
The circuit:
|
||||||
|
SD card attached to SPI bus as follows:
|
||||||
|
** MOSI - pin 11
|
||||||
|
** MISO - pin 12
|
||||||
|
** CLK - pin 13
|
||||||
|
** CS - pin 4 (for MKRZero SD: SDCARD_SS_PIN)
|
||||||
|
|
||||||
|
created Nov 2010
|
||||||
|
by David A. Mellis
|
||||||
|
modified 9 Apr 2012
|
||||||
|
by Tom Igoe
|
||||||
|
modified 2 Feb 2014
|
||||||
|
by Scott Fitzgerald
|
||||||
|
|
||||||
|
This example code is in the public domain.
|
||||||
|
|
||||||
|
*/
|
||||||
|
#include <SPI.h>
|
||||||
|
#include <SD.h>
|
||||||
|
|
||||||
|
File root;
|
||||||
|
|
||||||
|
void setup() {
|
||||||
|
// Open serial communications and wait for port to open:
|
||||||
|
Serial.begin(9600);
|
||||||
|
while (!Serial) {
|
||||||
|
; // wait for serial port to connect. Needed for native USB port only
|
||||||
|
}
|
||||||
|
|
||||||
|
Serial.print("Initializing SD card...");
|
||||||
|
|
||||||
|
if (!SD.begin(4)) {
|
||||||
|
Serial.println("initialization failed!");
|
||||||
|
while (1);
|
||||||
|
}
|
||||||
|
Serial.println("initialization done.");
|
||||||
|
|
||||||
|
root = SD.open("/");
|
||||||
|
|
||||||
|
printDirectory(root, 0);
|
||||||
|
|
||||||
|
Serial.println("done!");
|
||||||
|
}
|
||||||
|
|
||||||
|
void loop() {
|
||||||
|
// nothing happens after setup finishes.
|
||||||
|
}
|
||||||
|
|
||||||
|
void printDirectory(File dir, int numTabs) {
|
||||||
|
while (true) {
|
||||||
|
|
||||||
|
File entry = dir.openNextFile();
|
||||||
|
if (! entry) {
|
||||||
|
// no more files
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
for (uint8_t i = 0; i < numTabs; i++) {
|
||||||
|
Serial.print('\t');
|
||||||
|
}
|
||||||
|
Serial.print(entry.name());
|
||||||
|
if (entry.isDirectory()) {
|
||||||
|
Serial.println("/");
|
||||||
|
printDirectory(entry, numTabs + 1);
|
||||||
|
} else {
|
||||||
|
// files have sizes, directories do not
|
||||||
|
Serial.print("\t\t");
|
||||||
|
Serial.println(entry.size(), DEC);
|
||||||
|
}
|
||||||
|
entry.close();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
0
libraries/SD/extras/codespell-ignore-words-list.txt
Executable file
0
libraries/SD/extras/codespell-ignore-words-list.txt
Executable file
31
libraries/SD/keywords.txt
Executable file
31
libraries/SD/keywords.txt
Executable file
|
|
@ -0,0 +1,31 @@
|
||||||
|
#######################################
|
||||||
|
# Syntax Coloring Map SD
|
||||||
|
#######################################
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# Datatypes (KEYWORD1)
|
||||||
|
#######################################
|
||||||
|
|
||||||
|
SD KEYWORD1 SD
|
||||||
|
File KEYWORD1 SD
|
||||||
|
SDFile KEYWORD1 SD
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# Methods and Functions (KEYWORD2)
|
||||||
|
#######################################
|
||||||
|
begin KEYWORD2
|
||||||
|
exists KEYWORD2
|
||||||
|
mkdir KEYWORD2
|
||||||
|
remove KEYWORD2
|
||||||
|
rmdir KEYWORD2
|
||||||
|
open KEYWORD2
|
||||||
|
close KEYWORD2
|
||||||
|
seek KEYWORD2
|
||||||
|
position KEYWORD2
|
||||||
|
size KEYWORD2
|
||||||
|
|
||||||
|
#######################################
|
||||||
|
# Constants (LITERAL1)
|
||||||
|
#######################################
|
||||||
|
FILE_READ LITERAL1
|
||||||
|
FILE_WRITE LITERAL1
|
||||||
9
libraries/SD/library.properties
Executable file
9
libraries/SD/library.properties
Executable file
|
|
@ -0,0 +1,9 @@
|
||||||
|
name=SD
|
||||||
|
version=1.2.4
|
||||||
|
author=Arduino, SparkFun
|
||||||
|
maintainer=Arduino <info@arduino.cc>
|
||||||
|
sentence=Enables reading and writing on SD cards.
|
||||||
|
paragraph=Once an SD memory card is connected to the SPI interface of the Arduino or Genuino board you can create files and read/write on them. You can also move through directories on the SD card.
|
||||||
|
category=Data Storage
|
||||||
|
url=http://www.arduino.cc/en/Reference/SD
|
||||||
|
architectures=*
|
||||||
168
libraries/SD/src/File.cpp
Executable file
168
libraries/SD/src/File.cpp
Executable file
|
|
@ -0,0 +1,168 @@
|
||||||
|
/*
|
||||||
|
|
||||||
|
SD - a slightly more friendly wrapper for sdfatlib
|
||||||
|
|
||||||
|
This library aims to expose a subset of SD card functionality
|
||||||
|
in the form of a higher level "wrapper" object.
|
||||||
|
|
||||||
|
License: GNU General Public License V3
|
||||||
|
(Because sdfatlib is licensed with this.)
|
||||||
|
|
||||||
|
(C) Copyright 2010 SparkFun Electronics
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <SD.h>
|
||||||
|
|
||||||
|
/* for debugging file open/close leaks
|
||||||
|
uint8_t nfilecount=0;
|
||||||
|
*/
|
||||||
|
|
||||||
|
File::File(SdFile f, const char *n) {
|
||||||
|
// oh man you are kidding me, new() doesn't exist? Ok we do it by hand!
|
||||||
|
_file = (SdFile *)malloc(sizeof(SdFile));
|
||||||
|
if (_file) {
|
||||||
|
memcpy(_file, &f, sizeof(SdFile));
|
||||||
|
|
||||||
|
strncpy(_name, n, 12);
|
||||||
|
_name[12] = 0;
|
||||||
|
|
||||||
|
/* for debugging file open/close leaks
|
||||||
|
nfilecount++;
|
||||||
|
Serial.print("Created \"");
|
||||||
|
Serial.print(n);
|
||||||
|
Serial.print("\": ");
|
||||||
|
Serial.println(nfilecount, DEC);
|
||||||
|
*/
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
File::File(void) {
|
||||||
|
_file = 0;
|
||||||
|
_name[0] = 0;
|
||||||
|
//Serial.print("Created empty file object");
|
||||||
|
}
|
||||||
|
|
||||||
|
// returns a pointer to the file name
|
||||||
|
char *File::name(void) {
|
||||||
|
return _name;
|
||||||
|
}
|
||||||
|
|
||||||
|
// a directory is a special type of file
|
||||||
|
boolean File::isDirectory(void) {
|
||||||
|
return (_file && _file->isDir());
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
size_t File::write(uint8_t val) {
|
||||||
|
return write(&val, 1);
|
||||||
|
}
|
||||||
|
|
||||||
|
size_t File::write(const uint8_t *buf, size_t size) {
|
||||||
|
size_t t;
|
||||||
|
if (!_file) {
|
||||||
|
setWriteError();
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
_file->clearWriteError();
|
||||||
|
t = _file->write(buf, size);
|
||||||
|
if (_file->getWriteError()) {
|
||||||
|
setWriteError();
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
return t;
|
||||||
|
}
|
||||||
|
|
||||||
|
int File::availableForWrite() {
|
||||||
|
if (_file) {
|
||||||
|
return _file->availableForWrite();
|
||||||
|
}
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int File::peek() {
|
||||||
|
if (! _file) {
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int c = _file->read();
|
||||||
|
if (c != -1) {
|
||||||
|
_file->seekCur(-1);
|
||||||
|
}
|
||||||
|
return c;
|
||||||
|
}
|
||||||
|
|
||||||
|
int File::read() {
|
||||||
|
if (_file) {
|
||||||
|
return _file->read();
|
||||||
|
}
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
// buffered read for more efficient, high speed reading
|
||||||
|
int File::read(void *buf, uint16_t nbyte) {
|
||||||
|
if (_file) {
|
||||||
|
return _file->read(buf, nbyte);
|
||||||
|
}
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int File::available() {
|
||||||
|
if (! _file) {
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
uint32_t n = size() - position();
|
||||||
|
|
||||||
|
return n > 0X7FFF ? 0X7FFF : n;
|
||||||
|
}
|
||||||
|
|
||||||
|
void File::flush() {
|
||||||
|
if (_file) {
|
||||||
|
_file->sync();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
boolean File::seek(uint32_t pos) {
|
||||||
|
if (! _file) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
return _file->seekSet(pos);
|
||||||
|
}
|
||||||
|
|
||||||
|
uint32_t File::position() {
|
||||||
|
if (! _file) {
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
return _file->curPosition();
|
||||||
|
}
|
||||||
|
|
||||||
|
uint32_t File::size() {
|
||||||
|
if (! _file) {
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
return _file->fileSize();
|
||||||
|
}
|
||||||
|
|
||||||
|
void File::close() {
|
||||||
|
if (_file) {
|
||||||
|
_file->close();
|
||||||
|
free(_file);
|
||||||
|
_file = 0;
|
||||||
|
|
||||||
|
/* for debugging file open/close leaks
|
||||||
|
nfilecount--;
|
||||||
|
Serial.print("Deleted ");
|
||||||
|
Serial.println(nfilecount, DEC);
|
||||||
|
*/
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
File::operator bool() {
|
||||||
|
if (_file) {
|
||||||
|
return _file->isOpen();
|
||||||
|
}
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
13
libraries/SD/src/README.txt
Executable file
13
libraries/SD/src/README.txt
Executable file
|
|
@ -0,0 +1,13 @@
|
||||||
|
|
||||||
|
** SD - a slightly more friendly wrapper for sdfatlib **
|
||||||
|
|
||||||
|
This library aims to expose a subset of SD card functionality in the
|
||||||
|
form of a higher level "wrapper" object.
|
||||||
|
|
||||||
|
License: GNU General Public License V3
|
||||||
|
(Because sdfatlib is licensed with this.)
|
||||||
|
|
||||||
|
(C) Copyright 2010 SparkFun Electronics
|
||||||
|
|
||||||
|
Now better than ever with optimization, multiple file support, directory handling, etc - ladyada!
|
||||||
|
|
||||||
637
libraries/SD/src/SD.cpp
Executable file
637
libraries/SD/src/SD.cpp
Executable file
|
|
@ -0,0 +1,637 @@
|
||||||
|
/*
|
||||||
|
|
||||||
|
SD - a slightly more friendly wrapper for sdfatlib
|
||||||
|
|
||||||
|
This library aims to expose a subset of SD card functionality
|
||||||
|
in the form of a higher level "wrapper" object.
|
||||||
|
|
||||||
|
License: GNU General Public License V3
|
||||||
|
(Because sdfatlib is licensed with this.)
|
||||||
|
|
||||||
|
(C) Copyright 2010 SparkFun Electronics
|
||||||
|
|
||||||
|
|
||||||
|
This library provides four key benefits:
|
||||||
|
|
||||||
|
Including `SD.h` automatically creates a global
|
||||||
|
`SD` object which can be interacted with in a similar
|
||||||
|
manner to other standard global objects like `Serial` and `Ethernet`.
|
||||||
|
|
||||||
|
Boilerplate initialisation code is contained in one method named
|
||||||
|
`begin` and no further objects need to be created in order to access
|
||||||
|
the SD card.
|
||||||
|
|
||||||
|
Calls to `open` can supply a full path name including parent
|
||||||
|
directories which simplifies interacting with files in subdirectories.
|
||||||
|
|
||||||
|
Utility methods are provided to determine whether a file exists
|
||||||
|
and to create a directory hierarchy.
|
||||||
|
|
||||||
|
|
||||||
|
Note however that not all functionality provided by the underlying
|
||||||
|
sdfatlib library is exposed.
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
|
||||||
|
Implementation Notes
|
||||||
|
|
||||||
|
In order to handle multi-directory path traversal, functionality that
|
||||||
|
requires this ability is implemented as callback functions.
|
||||||
|
|
||||||
|
Individual methods call the `walkPath` function which performs the actual
|
||||||
|
directory traversal (swapping between two different directory/file handles
|
||||||
|
along the way) and at each level calls the supplied callback function.
|
||||||
|
|
||||||
|
Some types of functionality will take an action at each level (e.g. exists
|
||||||
|
or make directory) which others will only take an action at the bottom
|
||||||
|
level (e.g. open).
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "SD.h"
|
||||||
|
|
||||||
|
namespace SDLib {
|
||||||
|
|
||||||
|
// Used by `getNextPathComponent`
|
||||||
|
#define MAX_COMPONENT_LEN 12 // What is max length?
|
||||||
|
#define PATH_COMPONENT_BUFFER_LEN MAX_COMPONENT_LEN+1
|
||||||
|
|
||||||
|
bool getNextPathComponent(const char *path, unsigned int *p_offset,
|
||||||
|
char *buffer) {
|
||||||
|
/*
|
||||||
|
|
||||||
|
Parse individual path components from a path.
|
||||||
|
|
||||||
|
e.g. after repeated calls '/foo/bar/baz' will be split
|
||||||
|
into 'foo', 'bar', 'baz'.
|
||||||
|
|
||||||
|
This is similar to `strtok()` but copies the component into the
|
||||||
|
supplied buffer rather than modifying the original string.
|
||||||
|
|
||||||
|
|
||||||
|
`buffer` needs to be PATH_COMPONENT_BUFFER_LEN in size.
|
||||||
|
|
||||||
|
`p_offset` needs to point to an integer of the offset at
|
||||||
|
which the previous path component finished.
|
||||||
|
|
||||||
|
Returns `true` if more components remain.
|
||||||
|
|
||||||
|
Returns `false` if this is the last component.
|
||||||
|
(This means path ended with 'foo' or 'foo/'.)
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
// TODO: Have buffer local to this function, so we know it's the
|
||||||
|
// correct length?
|
||||||
|
|
||||||
|
int bufferOffset = 0;
|
||||||
|
|
||||||
|
int offset = *p_offset;
|
||||||
|
|
||||||
|
// Skip root or other separator
|
||||||
|
if (path[offset] == '/') {
|
||||||
|
offset++;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Copy the next next path segment
|
||||||
|
while (bufferOffset < MAX_COMPONENT_LEN
|
||||||
|
&& (path[offset] != '/')
|
||||||
|
&& (path[offset] != '\0')) {
|
||||||
|
buffer[bufferOffset++] = path[offset++];
|
||||||
|
}
|
||||||
|
|
||||||
|
buffer[bufferOffset] = '\0';
|
||||||
|
|
||||||
|
// Skip trailing separator so we can determine if this
|
||||||
|
// is the last component in the path or not.
|
||||||
|
if (path[offset] == '/') {
|
||||||
|
offset++;
|
||||||
|
}
|
||||||
|
|
||||||
|
*p_offset = offset;
|
||||||
|
|
||||||
|
return (path[offset] != '\0');
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
boolean walkPath(const char *filepath, SdFile& parentDir,
|
||||||
|
boolean(*callback)(SdFile& parentDir,
|
||||||
|
const char *filePathComponent,
|
||||||
|
boolean isLastComponent,
|
||||||
|
void *object),
|
||||||
|
void *object = NULL) {
|
||||||
|
/*
|
||||||
|
|
||||||
|
When given a file path (and parent directory--normally root),
|
||||||
|
this function traverses the directories in the path and at each
|
||||||
|
level calls the supplied callback function while also providing
|
||||||
|
the supplied object for context if required.
|
||||||
|
|
||||||
|
e.g. given the path '/foo/bar/baz'
|
||||||
|
the callback would be called at the equivalent of
|
||||||
|
'/foo', '/foo/bar' and '/foo/bar/baz'.
|
||||||
|
|
||||||
|
The implementation swaps between two different directory/file
|
||||||
|
handles as it traverses the directories and does not use recursion
|
||||||
|
in an attempt to use memory efficiently.
|
||||||
|
|
||||||
|
If a callback wishes to stop the directory traversal it should
|
||||||
|
return false--in this case the function will stop the traversal,
|
||||||
|
tidy up and return false.
|
||||||
|
|
||||||
|
If a directory path doesn't exist at some point this function will
|
||||||
|
also return false and not subsequently call the callback.
|
||||||
|
|
||||||
|
If a directory path specified is complete, valid and the callback
|
||||||
|
did not indicate the traversal should be interrupted then this
|
||||||
|
function will return true.
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
SdFile subfile1;
|
||||||
|
SdFile subfile2;
|
||||||
|
|
||||||
|
char buffer[PATH_COMPONENT_BUFFER_LEN];
|
||||||
|
|
||||||
|
unsigned int offset = 0;
|
||||||
|
|
||||||
|
SdFile *p_parent;
|
||||||
|
SdFile *p_child;
|
||||||
|
|
||||||
|
SdFile *p_tmp_sdfile;
|
||||||
|
|
||||||
|
p_child = &subfile1;
|
||||||
|
|
||||||
|
p_parent = &parentDir;
|
||||||
|
|
||||||
|
while (true) {
|
||||||
|
|
||||||
|
boolean moreComponents = getNextPathComponent(filepath, &offset, buffer);
|
||||||
|
|
||||||
|
boolean shouldContinue = callback((*p_parent), buffer, !moreComponents, object);
|
||||||
|
|
||||||
|
if (!shouldContinue) {
|
||||||
|
// TODO: Don't repeat this code?
|
||||||
|
// If it's one we've created then we
|
||||||
|
// don't need the parent handle anymore.
|
||||||
|
if (p_parent != &parentDir) {
|
||||||
|
(*p_parent).close();
|
||||||
|
}
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (!moreComponents) {
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
boolean exists = (*p_child).open(*p_parent, buffer, O_RDONLY);
|
||||||
|
|
||||||
|
// If it's one we've created then we
|
||||||
|
// don't need the parent handle anymore.
|
||||||
|
if (p_parent != &parentDir) {
|
||||||
|
(*p_parent).close();
|
||||||
|
}
|
||||||
|
|
||||||
|
// Handle case when it doesn't exist and we can't continue...
|
||||||
|
if (exists) {
|
||||||
|
// We alternate between two file handles as we go down
|
||||||
|
// the path.
|
||||||
|
if (p_parent == &parentDir) {
|
||||||
|
p_parent = &subfile2;
|
||||||
|
}
|
||||||
|
|
||||||
|
p_tmp_sdfile = p_parent;
|
||||||
|
p_parent = p_child;
|
||||||
|
p_child = p_tmp_sdfile;
|
||||||
|
} else {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if (p_parent != &parentDir) {
|
||||||
|
(*p_parent).close(); // TODO: Return/ handle different?
|
||||||
|
}
|
||||||
|
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
|
||||||
|
The callbacks used to implement various functionality follow.
|
||||||
|
|
||||||
|
Each callback is supplied with a parent directory handle,
|
||||||
|
character string with the name of the current file path component,
|
||||||
|
a flag indicating if this component is the last in the path and
|
||||||
|
a pointer to an arbitrary object used for context.
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
boolean callback_pathExists(SdFile& parentDir, const char *filePathComponent,
|
||||||
|
boolean /* isLastComponent */, void * /* object */) {
|
||||||
|
/*
|
||||||
|
|
||||||
|
Callback used to determine if a file/directory exists in parent
|
||||||
|
directory.
|
||||||
|
|
||||||
|
Returns true if file path exists.
|
||||||
|
|
||||||
|
*/
|
||||||
|
SdFile child;
|
||||||
|
|
||||||
|
boolean exists = child.open(parentDir, filePathComponent, O_RDONLY);
|
||||||
|
|
||||||
|
if (exists) {
|
||||||
|
child.close();
|
||||||
|
}
|
||||||
|
|
||||||
|
return exists;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
boolean callback_makeDirPath(SdFile& parentDir, const char *filePathComponent,
|
||||||
|
boolean isLastComponent, void *object) {
|
||||||
|
/*
|
||||||
|
|
||||||
|
Callback used to create a directory in the parent directory if
|
||||||
|
it does not already exist.
|
||||||
|
|
||||||
|
Returns true if a directory was created or it already existed.
|
||||||
|
|
||||||
|
*/
|
||||||
|
boolean result = false;
|
||||||
|
SdFile child;
|
||||||
|
|
||||||
|
result = callback_pathExists(parentDir, filePathComponent, isLastComponent, object);
|
||||||
|
if (!result) {
|
||||||
|
result = child.makeDir(parentDir, filePathComponent);
|
||||||
|
}
|
||||||
|
|
||||||
|
return result;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
|
||||||
|
boolean callback_openPath(SdFile& parentDir, char *filePathComponent,
|
||||||
|
boolean isLastComponent, void *object) {
|
||||||
|
|
||||||
|
Callback used to open a file specified by a filepath that may
|
||||||
|
specify one or more directories above it.
|
||||||
|
|
||||||
|
Expects the context object to be an instance of `SDClass` and
|
||||||
|
will use the `file` property of the instance to open the requested
|
||||||
|
file/directory with the associated file open mode property.
|
||||||
|
|
||||||
|
Always returns true if the directory traversal hasn't reached the
|
||||||
|
bottom of the directory hierarchy.
|
||||||
|
|
||||||
|
Returns false once the file has been opened--to prevent the traversal
|
||||||
|
from descending further. (This may be unnecessary.)
|
||||||
|
|
||||||
|
if (isLastComponent) {
|
||||||
|
SDClass *p_SD = static_cast<SDClass*>(object);
|
||||||
|
p_SD->file.open(parentDir, filePathComponent, p_SD->fileOpenMode);
|
||||||
|
if (p_SD->fileOpenMode == FILE_WRITE) {
|
||||||
|
p_SD->file.seekSet(p_SD->file.fileSize());
|
||||||
|
}
|
||||||
|
// TODO: Return file open result?
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
boolean callback_remove(SdFile& parentDir, const char *filePathComponent,
|
||||||
|
boolean isLastComponent, void * /* object */) {
|
||||||
|
if (isLastComponent) {
|
||||||
|
return SdFile::remove(parentDir, filePathComponent);
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
|
||||||
|
boolean callback_rmdir(SdFile& parentDir, const char *filePathComponent,
|
||||||
|
boolean isLastComponent, void * /* object */) {
|
||||||
|
if (isLastComponent) {
|
||||||
|
SdFile f;
|
||||||
|
if (!f.open(parentDir, filePathComponent, O_READ)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
return f.rmDir();
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/* Implementation of class used to create `SDCard` object. */
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
boolean SDClass::begin(uint8_t csPin) {
|
||||||
|
if (root.isOpen()) {
|
||||||
|
root.close();
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
|
||||||
|
Performs the initialisation required by the sdfatlib library.
|
||||||
|
|
||||||
|
Return true if initialization succeeds, false otherwise.
|
||||||
|
|
||||||
|
*/
|
||||||
|
return card.init(SPI_HALF_SPEED, csPin) &&
|
||||||
|
volume.init(card) &&
|
||||||
|
root.openRoot(volume);
|
||||||
|
}
|
||||||
|
|
||||||
|
boolean SDClass::begin(uint32_t clock, uint8_t csPin) {
|
||||||
|
if (root.isOpen()) {
|
||||||
|
root.close();
|
||||||
|
}
|
||||||
|
|
||||||
|
return card.init(SPI_HALF_SPEED, csPin) &&
|
||||||
|
card.setSpiClock(clock) &&
|
||||||
|
volume.init(card) &&
|
||||||
|
root.openRoot(volume);
|
||||||
|
}
|
||||||
|
|
||||||
|
//call this when a card is removed. It will allow you to insert and initialise a new card.
|
||||||
|
void SDClass::end() {
|
||||||
|
root.close();
|
||||||
|
}
|
||||||
|
|
||||||
|
// this little helper is used to traverse paths
|
||||||
|
SdFile SDClass::getParentDir(const char *filepath, int *index) {
|
||||||
|
// get parent directory
|
||||||
|
SdFile d1;
|
||||||
|
SdFile d2;
|
||||||
|
|
||||||
|
d1.openRoot(volume); // start with the mostparent, root!
|
||||||
|
|
||||||
|
// we'll use the pointers to swap between the two objects
|
||||||
|
SdFile *parent = &d1;
|
||||||
|
SdFile *subdir = &d2;
|
||||||
|
|
||||||
|
const char *origpath = filepath;
|
||||||
|
|
||||||
|
while (strchr(filepath, '/')) {
|
||||||
|
|
||||||
|
// get rid of leading /'s
|
||||||
|
if (filepath[0] == '/') {
|
||||||
|
filepath++;
|
||||||
|
continue;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (! strchr(filepath, '/')) {
|
||||||
|
// it was in the root directory, so leave now
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
// extract just the name of the next subdirectory
|
||||||
|
uint8_t idx = strchr(filepath, '/') - filepath;
|
||||||
|
if (idx > 12) {
|
||||||
|
idx = 12; // don't let them specify long names
|
||||||
|
}
|
||||||
|
char subdirname[13];
|
||||||
|
strncpy(subdirname, filepath, idx);
|
||||||
|
subdirname[idx] = 0;
|
||||||
|
|
||||||
|
// close the subdir (we reuse them) if open
|
||||||
|
subdir->close();
|
||||||
|
if (! subdir->open(parent, subdirname, O_READ)) {
|
||||||
|
// failed to open one of the subdirectories
|
||||||
|
return SdFile();
|
||||||
|
}
|
||||||
|
// move forward to the next subdirectory
|
||||||
|
filepath += idx;
|
||||||
|
|
||||||
|
// we reuse the objects, close it.
|
||||||
|
parent->close();
|
||||||
|
|
||||||
|
// swap the pointers
|
||||||
|
SdFile *t = parent;
|
||||||
|
parent = subdir;
|
||||||
|
subdir = t;
|
||||||
|
}
|
||||||
|
|
||||||
|
*index = (int)(filepath - origpath);
|
||||||
|
// parent is now the parent directory of the file!
|
||||||
|
return *parent;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
File SDClass::open(const char *filepath, uint8_t mode) {
|
||||||
|
/*
|
||||||
|
|
||||||
|
Open the supplied file path for reading or writing.
|
||||||
|
|
||||||
|
The file content can be accessed via the `file` property of
|
||||||
|
the `SDClass` object--this property is currently
|
||||||
|
a standard `SdFile` object from `sdfatlib`.
|
||||||
|
|
||||||
|
Defaults to read only.
|
||||||
|
|
||||||
|
If `write` is true, default action (when `append` is true) is to
|
||||||
|
append data to the end of the file.
|
||||||
|
|
||||||
|
If `append` is false then the file will be truncated first.
|
||||||
|
|
||||||
|
If the file does not exist and it is opened for writing the file
|
||||||
|
will be created.
|
||||||
|
|
||||||
|
An attempt to open a file for reading that does not exist is an
|
||||||
|
error.
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
int pathidx;
|
||||||
|
|
||||||
|
// do the interactive search
|
||||||
|
SdFile parentdir = getParentDir(filepath, &pathidx);
|
||||||
|
// no more subdirs!
|
||||||
|
|
||||||
|
filepath += pathidx;
|
||||||
|
|
||||||
|
if (! filepath[0]) {
|
||||||
|
// it was the directory itself!
|
||||||
|
return File(parentdir, "/");
|
||||||
|
}
|
||||||
|
|
||||||
|
// Open the file itself
|
||||||
|
SdFile file;
|
||||||
|
|
||||||
|
// failed to open a subdir!
|
||||||
|
if (!parentdir.isOpen()) {
|
||||||
|
return File();
|
||||||
|
}
|
||||||
|
|
||||||
|
if (! file.open(parentdir, filepath, mode)) {
|
||||||
|
return File();
|
||||||
|
}
|
||||||
|
// close the parent
|
||||||
|
parentdir.close();
|
||||||
|
|
||||||
|
if ((mode & (O_APPEND | O_WRITE)) == (O_APPEND | O_WRITE)) {
|
||||||
|
file.seekSet(file.fileSize());
|
||||||
|
}
|
||||||
|
return File(file, filepath);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
File SDClass::open(char *filepath, uint8_t mode) {
|
||||||
|
//
|
||||||
|
|
||||||
|
Open the supplied file path for reading or writing.
|
||||||
|
|
||||||
|
The file content can be accessed via the `file` property of
|
||||||
|
the `SDClass` object--this property is currently
|
||||||
|
a standard `SdFile` object from `sdfatlib`.
|
||||||
|
|
||||||
|
Defaults to read only.
|
||||||
|
|
||||||
|
If `write` is true, default action (when `append` is true) is to
|
||||||
|
append data to the end of the file.
|
||||||
|
|
||||||
|
If `append` is false then the file will be truncated first.
|
||||||
|
|
||||||
|
If the file does not exist and it is opened for writing the file
|
||||||
|
will be created.
|
||||||
|
|
||||||
|
An attempt to open a file for reading that does not exist is an
|
||||||
|
error.
|
||||||
|
|
||||||
|
//
|
||||||
|
|
||||||
|
// TODO: Allow for read&write? (Possibly not, as it requires seek.)
|
||||||
|
|
||||||
|
fileOpenMode = mode;
|
||||||
|
walkPath(filepath, root, callback_openPath, this);
|
||||||
|
|
||||||
|
return File();
|
||||||
|
|
||||||
|
}
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
//boolean SDClass::close() {
|
||||||
|
// /*
|
||||||
|
//
|
||||||
|
// Closes the file opened by the `open` method.
|
||||||
|
//
|
||||||
|
// */
|
||||||
|
// file.close();
|
||||||
|
//}
|
||||||
|
|
||||||
|
|
||||||
|
boolean SDClass::exists(const char *filepath) {
|
||||||
|
/*
|
||||||
|
|
||||||
|
Returns true if the supplied file path exists.
|
||||||
|
|
||||||
|
*/
|
||||||
|
return walkPath(filepath, root, callback_pathExists);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
//boolean SDClass::exists(char *filepath, SdFile& parentDir) {
|
||||||
|
// /*
|
||||||
|
//
|
||||||
|
// Returns true if the supplied file path rooted at `parentDir`
|
||||||
|
// exists.
|
||||||
|
//
|
||||||
|
// */
|
||||||
|
// return walkPath(filepath, parentDir, callback_pathExists);
|
||||||
|
//}
|
||||||
|
|
||||||
|
|
||||||
|
boolean SDClass::mkdir(const char *filepath) {
|
||||||
|
/*
|
||||||
|
|
||||||
|
Makes a single directory or a hierarchy of directories.
|
||||||
|
|
||||||
|
A rough equivalent to `mkdir -p`.
|
||||||
|
|
||||||
|
*/
|
||||||
|
return walkPath(filepath, root, callback_makeDirPath);
|
||||||
|
}
|
||||||
|
|
||||||
|
boolean SDClass::rmdir(const char *filepath) {
|
||||||
|
/*
|
||||||
|
|
||||||
|
Remove a single directory or a hierarchy of directories.
|
||||||
|
|
||||||
|
A rough equivalent to `rm -rf`.
|
||||||
|
|
||||||
|
*/
|
||||||
|
return walkPath(filepath, root, callback_rmdir);
|
||||||
|
}
|
||||||
|
|
||||||
|
boolean SDClass::remove(const char *filepath) {
|
||||||
|
return walkPath(filepath, root, callback_remove);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
// allows you to recurse into a directory
|
||||||
|
File File::openNextFile(uint8_t mode) {
|
||||||
|
dir_t p;
|
||||||
|
|
||||||
|
//Serial.print("\t\treading dir...");
|
||||||
|
while (_file->readDir(&p) > 0) {
|
||||||
|
|
||||||
|
// done if past last used entry
|
||||||
|
if (p.name[0] == DIR_NAME_FREE) {
|
||||||
|
//Serial.println("end");
|
||||||
|
return File();
|
||||||
|
}
|
||||||
|
|
||||||
|
// skip deleted entry and entries for . and ..
|
||||||
|
if (p.name[0] == DIR_NAME_DELETED || p.name[0] == '.') {
|
||||||
|
//Serial.println("dots");
|
||||||
|
continue;
|
||||||
|
}
|
||||||
|
|
||||||
|
// only list subdirectories and files
|
||||||
|
if (!DIR_IS_FILE_OR_SUBDIR(&p)) {
|
||||||
|
//Serial.println("notafile");
|
||||||
|
continue;
|
||||||
|
}
|
||||||
|
|
||||||
|
// print file name with possible blank fill
|
||||||
|
SdFile f;
|
||||||
|
char name[13];
|
||||||
|
_file->dirName(p, name);
|
||||||
|
//Serial.print("try to open file ");
|
||||||
|
//Serial.println(name);
|
||||||
|
|
||||||
|
if (f.open(_file, name, mode)) {
|
||||||
|
//Serial.println("OK!");
|
||||||
|
return File(f, name);
|
||||||
|
} else {
|
||||||
|
//Serial.println("ugh");
|
||||||
|
return File();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
//Serial.println("nothing");
|
||||||
|
return File();
|
||||||
|
}
|
||||||
|
|
||||||
|
void File::rewindDirectory(void) {
|
||||||
|
if (isDirectory()) {
|
||||||
|
_file->rewind();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
SDClass SD;
|
||||||
|
|
||||||
|
};
|
||||||
138
libraries/SD/src/SD.h
Executable file
138
libraries/SD/src/SD.h
Executable file
|
|
@ -0,0 +1,138 @@
|
||||||
|
/*
|
||||||
|
|
||||||
|
SD - a slightly more friendly wrapper for sdfatlib
|
||||||
|
|
||||||
|
This library aims to expose a subset of SD card functionality
|
||||||
|
in the form of a higher level "wrapper" object.
|
||||||
|
|
||||||
|
License: GNU General Public License V3
|
||||||
|
(Because sdfatlib is licensed with this.)
|
||||||
|
|
||||||
|
(C) Copyright 2010 SparkFun Electronics
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __SD_H__
|
||||||
|
#define __SD_H__
|
||||||
|
|
||||||
|
#include <Arduino.h>
|
||||||
|
|
||||||
|
#include "utility/SdFat.h"
|
||||||
|
#include "utility/SdFatUtil.h"
|
||||||
|
|
||||||
|
#define FILE_READ O_READ
|
||||||
|
#define FILE_WRITE (O_READ | O_WRITE | O_CREAT | O_APPEND)
|
||||||
|
|
||||||
|
namespace SDLib {
|
||||||
|
|
||||||
|
class File : public Stream {
|
||||||
|
private:
|
||||||
|
char _name[13]; // our name
|
||||||
|
SdFile *_file; // underlying file pointer
|
||||||
|
|
||||||
|
public:
|
||||||
|
File(SdFile f, const char *name); // wraps an underlying SdFile
|
||||||
|
File(void); // 'empty' constructor
|
||||||
|
virtual size_t write(uint8_t);
|
||||||
|
virtual size_t write(const uint8_t *buf, size_t size);
|
||||||
|
virtual int availableForWrite();
|
||||||
|
virtual int read();
|
||||||
|
virtual int peek();
|
||||||
|
virtual int available();
|
||||||
|
virtual void flush();
|
||||||
|
int read(void *buf, uint16_t nbyte);
|
||||||
|
boolean seek(uint32_t pos);
|
||||||
|
uint32_t position();
|
||||||
|
uint32_t size();
|
||||||
|
void close();
|
||||||
|
operator bool();
|
||||||
|
char * name();
|
||||||
|
|
||||||
|
boolean isDirectory(void);
|
||||||
|
File openNextFile(uint8_t mode = O_RDONLY);
|
||||||
|
void rewindDirectory(void);
|
||||||
|
|
||||||
|
using Print::write;
|
||||||
|
};
|
||||||
|
|
||||||
|
class SDClass {
|
||||||
|
|
||||||
|
private:
|
||||||
|
// These are required for initialisation and use of sdfatlib
|
||||||
|
Sd2Card card;
|
||||||
|
SdVolume volume;
|
||||||
|
SdFile root;
|
||||||
|
|
||||||
|
// my quick&dirty iterator, should be replaced
|
||||||
|
SdFile getParentDir(const char *filepath, int *indx);
|
||||||
|
public:
|
||||||
|
// This needs to be called to set up the connection to the SD card
|
||||||
|
// before other methods are used.
|
||||||
|
boolean begin(uint8_t csPin = SD_CHIP_SELECT_PIN);
|
||||||
|
boolean begin(uint32_t clock, uint8_t csPin);
|
||||||
|
|
||||||
|
//call this when a card is removed. It will allow you to insert and initialise a new card.
|
||||||
|
void end();
|
||||||
|
|
||||||
|
// Open the specified file/directory with the supplied mode (e.g. read or
|
||||||
|
// write, etc). Returns a File object for interacting with the file.
|
||||||
|
// Note that currently only one file can be open at a time.
|
||||||
|
File open(const char *filename, uint8_t mode = FILE_READ);
|
||||||
|
File open(const String &filename, uint8_t mode = FILE_READ) {
|
||||||
|
return open(filename.c_str(), mode);
|
||||||
|
}
|
||||||
|
|
||||||
|
// Methods to determine if the requested file path exists.
|
||||||
|
boolean exists(const char *filepath);
|
||||||
|
boolean exists(const String &filepath) {
|
||||||
|
return exists(filepath.c_str());
|
||||||
|
}
|
||||||
|
|
||||||
|
// Create the requested directory heirarchy--if intermediate directories
|
||||||
|
// do not exist they will be created.
|
||||||
|
boolean mkdir(const char *filepath);
|
||||||
|
boolean mkdir(const String &filepath) {
|
||||||
|
return mkdir(filepath.c_str());
|
||||||
|
}
|
||||||
|
|
||||||
|
// Delete the file.
|
||||||
|
boolean remove(const char *filepath);
|
||||||
|
boolean remove(const String &filepath) {
|
||||||
|
return remove(filepath.c_str());
|
||||||
|
}
|
||||||
|
|
||||||
|
boolean rmdir(const char *filepath);
|
||||||
|
boolean rmdir(const String &filepath) {
|
||||||
|
return rmdir(filepath.c_str());
|
||||||
|
}
|
||||||
|
|
||||||
|
private:
|
||||||
|
|
||||||
|
// This is used to determine the mode used to open a file
|
||||||
|
// it's here because it's the easiest place to pass the
|
||||||
|
// information through the directory walking function. But
|
||||||
|
// it's probably not the best place for it.
|
||||||
|
// It shouldn't be set directly--it is set via the parameters to `open`.
|
||||||
|
int fileOpenMode;
|
||||||
|
|
||||||
|
friend class File;
|
||||||
|
friend boolean callback_openPath(SdFile&, const char *, boolean, void *);
|
||||||
|
};
|
||||||
|
|
||||||
|
extern SDClass SD;
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
// We enclose File and SD classes in namespace SDLib to avoid conflicts
|
||||||
|
// with others legacy libraries that redefines File class.
|
||||||
|
|
||||||
|
// This ensure compatibility with sketches that uses only SD library
|
||||||
|
using namespace SDLib;
|
||||||
|
|
||||||
|
// This allows sketches to use SDLib::File with other libraries (in the
|
||||||
|
// sketch you must use SDFile instead of File to disambiguate)
|
||||||
|
typedef SDLib::File SDFile;
|
||||||
|
typedef SDLib::SDClass SDFileSystemClass;
|
||||||
|
#define SDFileSystem SDLib::SD
|
||||||
|
|
||||||
|
#endif
|
||||||
418
libraries/SD/src/utility/FatStructs.h
Executable file
418
libraries/SD/src/utility/FatStructs.h
Executable file
|
|
@ -0,0 +1,418 @@
|
||||||
|
/* Arduino SdFat Library
|
||||||
|
Copyright (C) 2009 by William Greiman
|
||||||
|
|
||||||
|
This file is part of the Arduino SdFat Library
|
||||||
|
|
||||||
|
This Library is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 3 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This Library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with the Arduino SdFat Library. If not, see
|
||||||
|
<http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#ifndef FatStructs_h
|
||||||
|
#define FatStructs_h
|
||||||
|
/**
|
||||||
|
\file
|
||||||
|
FAT file structures
|
||||||
|
*/
|
||||||
|
/*
|
||||||
|
mostly from Microsoft document fatgen103.doc
|
||||||
|
http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
|
||||||
|
*/
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** Value for byte 510 of boot block or MBR */
|
||||||
|
uint8_t const BOOTSIG0 = 0X55;
|
||||||
|
/** Value for byte 511 of boot block or MBR */
|
||||||
|
uint8_t const BOOTSIG1 = 0XAA;
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
\struct partitionTable
|
||||||
|
\brief MBR partition table entry
|
||||||
|
|
||||||
|
A partition table entry for a MBR formatted storage device.
|
||||||
|
The MBR partition table has four entries.
|
||||||
|
*/
|
||||||
|
struct partitionTable {
|
||||||
|
/**
|
||||||
|
Boot Indicator . Indicates whether the volume is the active
|
||||||
|
partition. Legal values include: 0X00. Do not use for booting.
|
||||||
|
0X80 Active partition.
|
||||||
|
*/
|
||||||
|
uint8_t boot;
|
||||||
|
/**
|
||||||
|
Head part of Cylinder-head-sector address of the first block in
|
||||||
|
the partition. Legal values are 0-255. Only used in old PC BIOS.
|
||||||
|
*/
|
||||||
|
uint8_t beginHead;
|
||||||
|
/**
|
||||||
|
Sector part of Cylinder-head-sector address of the first block in
|
||||||
|
the partition. Legal values are 1-63. Only used in old PC BIOS.
|
||||||
|
*/
|
||||||
|
unsigned beginSector : 6;
|
||||||
|
/** High bits cylinder for first block in partition. */
|
||||||
|
unsigned beginCylinderHigh : 2;
|
||||||
|
/**
|
||||||
|
Combine beginCylinderLow with beginCylinderHigh. Legal values
|
||||||
|
are 0-1023. Only used in old PC BIOS.
|
||||||
|
*/
|
||||||
|
uint8_t beginCylinderLow;
|
||||||
|
/**
|
||||||
|
Partition type. See defines that begin with PART_TYPE_ for
|
||||||
|
some Microsoft partition types.
|
||||||
|
*/
|
||||||
|
uint8_t type;
|
||||||
|
/**
|
||||||
|
head part of cylinder-head-sector address of the last sector in the
|
||||||
|
partition. Legal values are 0-255. Only used in old PC BIOS.
|
||||||
|
*/
|
||||||
|
uint8_t endHead;
|
||||||
|
/**
|
||||||
|
Sector part of cylinder-head-sector address of the last sector in
|
||||||
|
the partition. Legal values are 1-63. Only used in old PC BIOS.
|
||||||
|
*/
|
||||||
|
unsigned endSector : 6;
|
||||||
|
/** High bits of end cylinder */
|
||||||
|
unsigned endCylinderHigh : 2;
|
||||||
|
/**
|
||||||
|
Combine endCylinderLow with endCylinderHigh. Legal values
|
||||||
|
are 0-1023. Only used in old PC BIOS.
|
||||||
|
*/
|
||||||
|
uint8_t endCylinderLow;
|
||||||
|
/** Logical block address of the first block in the partition. */
|
||||||
|
uint32_t firstSector;
|
||||||
|
/** Length of the partition, in blocks. */
|
||||||
|
uint32_t totalSectors;
|
||||||
|
} __attribute__((packed));
|
||||||
|
/** Type name for partitionTable */
|
||||||
|
typedef struct partitionTable part_t;
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
\struct masterBootRecord
|
||||||
|
|
||||||
|
\brief Master Boot Record
|
||||||
|
|
||||||
|
The first block of a storage device that is formatted with a MBR.
|
||||||
|
*/
|
||||||
|
struct masterBootRecord {
|
||||||
|
/** Code Area for master boot program. */
|
||||||
|
uint8_t codeArea[440];
|
||||||
|
/** Optional WindowsNT disk signature. May contain more boot code. */
|
||||||
|
uint32_t diskSignature;
|
||||||
|
/** Usually zero but may be more boot code. */
|
||||||
|
uint16_t usuallyZero;
|
||||||
|
/** Partition tables. */
|
||||||
|
part_t part[4];
|
||||||
|
/** First MBR signature byte. Must be 0X55 */
|
||||||
|
uint8_t mbrSig0;
|
||||||
|
/** Second MBR signature byte. Must be 0XAA */
|
||||||
|
uint8_t mbrSig1;
|
||||||
|
} __attribute__((packed));
|
||||||
|
/** Type name for masterBootRecord */
|
||||||
|
typedef struct masterBootRecord mbr_t;
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
\struct biosParmBlock
|
||||||
|
|
||||||
|
\brief BIOS parameter block
|
||||||
|
|
||||||
|
The BIOS parameter block describes the physical layout of a FAT volume.
|
||||||
|
*/
|
||||||
|
struct biosParmBlock {
|
||||||
|
/**
|
||||||
|
Count of bytes per sector. This value may take on only the
|
||||||
|
following values: 512, 1024, 2048 or 4096
|
||||||
|
*/
|
||||||
|
uint16_t bytesPerSector;
|
||||||
|
/**
|
||||||
|
Number of sectors per allocation unit. This value must be a
|
||||||
|
power of 2 that is greater than 0. The legal values are
|
||||||
|
1, 2, 4, 8, 16, 32, 64, and 128.
|
||||||
|
*/
|
||||||
|
uint8_t sectorsPerCluster;
|
||||||
|
/**
|
||||||
|
Number of sectors before the first FAT.
|
||||||
|
This value must not be zero.
|
||||||
|
*/
|
||||||
|
uint16_t reservedSectorCount;
|
||||||
|
/** The count of FAT data structures on the volume. This field should
|
||||||
|
always contain the value 2 for any FAT volume of any type.
|
||||||
|
*/
|
||||||
|
uint8_t fatCount;
|
||||||
|
/**
|
||||||
|
For FAT12 and FAT16 volumes, this field contains the count of
|
||||||
|
32-byte directory entries in the root directory. For FAT32 volumes,
|
||||||
|
this field must be set to 0. For FAT12 and FAT16 volumes, this
|
||||||
|
value should always specify a count that when multiplied by 32
|
||||||
|
results in a multiple of bytesPerSector. FAT16 volumes should
|
||||||
|
use the value 512.
|
||||||
|
*/
|
||||||
|
uint16_t rootDirEntryCount;
|
||||||
|
/**
|
||||||
|
This field is the old 16-bit total count of sectors on the volume.
|
||||||
|
This count includes the count of all sectors in all four regions
|
||||||
|
of the volume. This field can be 0; if it is 0, then totalSectors32
|
||||||
|
must be non-zero. For FAT32 volumes, this field must be 0. For
|
||||||
|
FAT12 and FAT16 volumes, this field contains the sector count, and
|
||||||
|
totalSectors32 is 0 if the total sector count fits
|
||||||
|
(is less than 0x10000).
|
||||||
|
*/
|
||||||
|
uint16_t totalSectors16;
|
||||||
|
/**
|
||||||
|
This dates back to the old MS-DOS 1.x media determination and is
|
||||||
|
no longer usually used for anything. 0xF8 is the standard value
|
||||||
|
for fixed (non-removable) media. For removable media, 0xF0 is
|
||||||
|
frequently used. Legal values are 0xF0 or 0xF8-0xFF.
|
||||||
|
*/
|
||||||
|
uint8_t mediaType;
|
||||||
|
/**
|
||||||
|
Count of sectors occupied by one FAT on FAT12/FAT16 volumes.
|
||||||
|
On FAT32 volumes this field must be 0, and sectorsPerFat32
|
||||||
|
contains the FAT size count.
|
||||||
|
*/
|
||||||
|
uint16_t sectorsPerFat16;
|
||||||
|
/** Sectors per track for interrupt 0x13. Not used otherwise. */
|
||||||
|
uint16_t sectorsPerTrtack;
|
||||||
|
/** Number of heads for interrupt 0x13. Not used otherwise. */
|
||||||
|
uint16_t headCount;
|
||||||
|
/**
|
||||||
|
Count of hidden sectors preceding the partition that contains this
|
||||||
|
FAT volume. This field is generally only relevant for media
|
||||||
|
visible on interrupt 0x13.
|
||||||
|
*/
|
||||||
|
uint32_t hidddenSectors;
|
||||||
|
/**
|
||||||
|
This field is the new 32-bit total count of sectors on the volume.
|
||||||
|
This count includes the count of all sectors in all four regions
|
||||||
|
of the volume. This field can be 0; if it is 0, then
|
||||||
|
totalSectors16 must be non-zero.
|
||||||
|
*/
|
||||||
|
uint32_t totalSectors32;
|
||||||
|
/**
|
||||||
|
Count of sectors occupied by one FAT on FAT32 volumes.
|
||||||
|
*/
|
||||||
|
uint32_t sectorsPerFat32;
|
||||||
|
/**
|
||||||
|
This field is only defined for FAT32 media and does not exist on
|
||||||
|
FAT12 and FAT16 media.
|
||||||
|
Bits 0-3 -- Zero-based number of active FAT.
|
||||||
|
Only valid if mirroring is disabled.
|
||||||
|
Bits 4-6 -- Reserved.
|
||||||
|
Bit 7 -- 0 means the FAT is mirrored at runtime into all FATs.
|
||||||
|
-- 1 means only one FAT is active; it is the one referenced in bits 0-3.
|
||||||
|
Bits 8-15 -- Reserved.
|
||||||
|
*/
|
||||||
|
uint16_t fat32Flags;
|
||||||
|
/**
|
||||||
|
FAT32 version. High byte is major revision number.
|
||||||
|
Low byte is minor revision number. Only 0.0 define.
|
||||||
|
*/
|
||||||
|
uint16_t fat32Version;
|
||||||
|
/**
|
||||||
|
Cluster number of the first cluster of the root directory for FAT32.
|
||||||
|
This usually 2 but not required to be 2.
|
||||||
|
*/
|
||||||
|
uint32_t fat32RootCluster;
|
||||||
|
/**
|
||||||
|
Sector number of FSINFO structure in the reserved area of the
|
||||||
|
FAT32 volume. Usually 1.
|
||||||
|
*/
|
||||||
|
uint16_t fat32FSInfo;
|
||||||
|
/**
|
||||||
|
If non-zero, indicates the sector number in the reserved area
|
||||||
|
of the volume of a copy of the boot record. Usually 6.
|
||||||
|
No value other than 6 is recommended.
|
||||||
|
*/
|
||||||
|
uint16_t fat32BackBootBlock;
|
||||||
|
/**
|
||||||
|
Reserved for future expansion. Code that formats FAT32 volumes
|
||||||
|
should always set all of the bytes of this field to 0.
|
||||||
|
*/
|
||||||
|
uint8_t fat32Reserved[12];
|
||||||
|
} __attribute__((packed));
|
||||||
|
/** Type name for biosParmBlock */
|
||||||
|
typedef struct biosParmBlock bpb_t;
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
\struct fat32BootSector
|
||||||
|
|
||||||
|
\brief Boot sector for a FAT16 or FAT32 volume.
|
||||||
|
|
||||||
|
*/
|
||||||
|
struct fat32BootSector {
|
||||||
|
/** X86 jmp to boot program */
|
||||||
|
uint8_t jmpToBootCode[3];
|
||||||
|
/** informational only - don't depend on it */
|
||||||
|
char oemName[8];
|
||||||
|
/** BIOS Parameter Block */
|
||||||
|
bpb_t bpb;
|
||||||
|
/** for int0x13 use value 0X80 for hard drive */
|
||||||
|
uint8_t driveNumber;
|
||||||
|
/** used by Windows NT - should be zero for FAT */
|
||||||
|
uint8_t reserved1;
|
||||||
|
/** 0X29 if next three fields are valid */
|
||||||
|
uint8_t bootSignature;
|
||||||
|
/** usually generated by combining date and time */
|
||||||
|
uint32_t volumeSerialNumber;
|
||||||
|
/** should match volume label in root dir */
|
||||||
|
char volumeLabel[11];
|
||||||
|
/** informational only - don't depend on it */
|
||||||
|
char fileSystemType[8];
|
||||||
|
/** X86 boot code */
|
||||||
|
uint8_t bootCode[420];
|
||||||
|
/** must be 0X55 */
|
||||||
|
uint8_t bootSectorSig0;
|
||||||
|
/** must be 0XAA */
|
||||||
|
uint8_t bootSectorSig1;
|
||||||
|
} __attribute__((packed));
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// End Of Chain values for FAT entries
|
||||||
|
/** FAT16 end of chain value used by Microsoft. */
|
||||||
|
uint16_t const FAT16EOC = 0XFFFF;
|
||||||
|
/** Minimum value for FAT16 EOC. Use to test for EOC. */
|
||||||
|
uint16_t const FAT16EOC_MIN = 0XFFF8;
|
||||||
|
/** FAT32 end of chain value used by Microsoft. */
|
||||||
|
uint32_t const FAT32EOC = 0X0FFFFFFF;
|
||||||
|
/** Minimum value for FAT32 EOC. Use to test for EOC. */
|
||||||
|
uint32_t const FAT32EOC_MIN = 0X0FFFFFF8;
|
||||||
|
/** Mask a for FAT32 entry. Entries are 28 bits. */
|
||||||
|
uint32_t const FAT32MASK = 0X0FFFFFFF;
|
||||||
|
|
||||||
|
/** Type name for fat32BootSector */
|
||||||
|
typedef struct fat32BootSector fbs_t;
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
\struct directoryEntry
|
||||||
|
\brief FAT short directory entry
|
||||||
|
|
||||||
|
Short means short 8.3 name, not the entry size.
|
||||||
|
|
||||||
|
Date Format. A FAT directory entry date stamp is a 16-bit field that is
|
||||||
|
basically a date relative to the MS-DOS epoch of 01/01/1980. Here is the
|
||||||
|
format (bit 0 is the LSB of the 16-bit word, bit 15 is the MSB of the
|
||||||
|
16-bit word):
|
||||||
|
|
||||||
|
Bits 9-15: Count of years from 1980, valid value range 0-127
|
||||||
|
inclusive (1980-2107).
|
||||||
|
|
||||||
|
Bits 5-8: Month of year, 1 = January, valid value range 1-12 inclusive.
|
||||||
|
|
||||||
|
Bits 0-4: Day of month, valid value range 1-31 inclusive.
|
||||||
|
|
||||||
|
Time Format. A FAT directory entry time stamp is a 16-bit field that has
|
||||||
|
a granularity of 2 seconds. Here is the format (bit 0 is the LSB of the
|
||||||
|
16-bit word, bit 15 is the MSB of the 16-bit word).
|
||||||
|
|
||||||
|
Bits 11-15: Hours, valid value range 0-23 inclusive.
|
||||||
|
|
||||||
|
Bits 5-10: Minutes, valid value range 0-59 inclusive.
|
||||||
|
|
||||||
|
Bits 0-4: 2-second count, valid value range 0-29 inclusive (0 - 58 seconds).
|
||||||
|
|
||||||
|
The valid time range is from Midnight 00:00:00 to 23:59:58.
|
||||||
|
*/
|
||||||
|
struct directoryEntry {
|
||||||
|
/**
|
||||||
|
Short 8.3 name.
|
||||||
|
The first eight bytes contain the file name with blank fill.
|
||||||
|
The last three bytes contain the file extension with blank fill.
|
||||||
|
*/
|
||||||
|
uint8_t name[11];
|
||||||
|
/** Entry attributes.
|
||||||
|
|
||||||
|
The upper two bits of the attribute byte are reserved and should
|
||||||
|
always be set to 0 when a file is created and never modified or
|
||||||
|
looked at after that. See defines that begin with DIR_ATT_.
|
||||||
|
*/
|
||||||
|
uint8_t attributes;
|
||||||
|
/**
|
||||||
|
Reserved for use by Windows NT. Set value to 0 when a file is
|
||||||
|
created and never modify or look at it after that.
|
||||||
|
*/
|
||||||
|
uint8_t reservedNT;
|
||||||
|
/**
|
||||||
|
The granularity of the seconds part of creationTime is 2 seconds
|
||||||
|
so this field is a count of tenths of a second and its valid
|
||||||
|
value range is 0-199 inclusive. (WHG note - seems to be hundredths)
|
||||||
|
*/
|
||||||
|
uint8_t creationTimeTenths;
|
||||||
|
/** Time file was created. */
|
||||||
|
uint16_t creationTime;
|
||||||
|
/** Date file was created. */
|
||||||
|
uint16_t creationDate;
|
||||||
|
/**
|
||||||
|
Last access date. Note that there is no last access time, only
|
||||||
|
a date. This is the date of last read or write. In the case of
|
||||||
|
a write, this should be set to the same date as lastWriteDate.
|
||||||
|
*/
|
||||||
|
uint16_t lastAccessDate;
|
||||||
|
/**
|
||||||
|
High word of this entry's first cluster number (always 0 for a
|
||||||
|
FAT12 or FAT16 volume).
|
||||||
|
*/
|
||||||
|
uint16_t firstClusterHigh;
|
||||||
|
/** Time of last write. File creation is considered a write. */
|
||||||
|
uint16_t lastWriteTime;
|
||||||
|
/** Date of last write. File creation is considered a write. */
|
||||||
|
uint16_t lastWriteDate;
|
||||||
|
/** Low word of this entry's first cluster number. */
|
||||||
|
uint16_t firstClusterLow;
|
||||||
|
/** 32-bit unsigned holding this file's size in bytes. */
|
||||||
|
uint32_t fileSize;
|
||||||
|
} __attribute__((packed));
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// Definitions for directory entries
|
||||||
|
//
|
||||||
|
/** Type name for directoryEntry */
|
||||||
|
typedef struct directoryEntry dir_t;
|
||||||
|
/** escape for name[0] = 0XE5 */
|
||||||
|
uint8_t const DIR_NAME_0XE5 = 0X05;
|
||||||
|
/** name[0] value for entry that is free after being "deleted" */
|
||||||
|
uint8_t const DIR_NAME_DELETED = 0XE5;
|
||||||
|
/** name[0] value for entry that is free and no allocated entries follow */
|
||||||
|
uint8_t const DIR_NAME_FREE = 0X00;
|
||||||
|
/** file is read-only */
|
||||||
|
uint8_t const DIR_ATT_READ_ONLY = 0X01;
|
||||||
|
/** File should hidden in directory listings */
|
||||||
|
uint8_t const DIR_ATT_HIDDEN = 0X02;
|
||||||
|
/** Entry is for a system file */
|
||||||
|
uint8_t const DIR_ATT_SYSTEM = 0X04;
|
||||||
|
/** Directory entry contains the volume label */
|
||||||
|
uint8_t const DIR_ATT_VOLUME_ID = 0X08;
|
||||||
|
/** Entry is for a directory */
|
||||||
|
uint8_t const DIR_ATT_DIRECTORY = 0X10;
|
||||||
|
/** Old DOS archive bit for backup support */
|
||||||
|
uint8_t const DIR_ATT_ARCHIVE = 0X20;
|
||||||
|
/** Test value for long name entry. Test is
|
||||||
|
(d->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME. */
|
||||||
|
uint8_t const DIR_ATT_LONG_NAME = 0X0F;
|
||||||
|
/** Test mask for long name entry */
|
||||||
|
uint8_t const DIR_ATT_LONG_NAME_MASK = 0X3F;
|
||||||
|
/** defined attribute bits */
|
||||||
|
uint8_t const DIR_ATT_DEFINED_BITS = 0X3F;
|
||||||
|
/** Directory entry is part of a long name */
|
||||||
|
static inline uint8_t DIR_IS_LONG_NAME(const dir_t* dir) {
|
||||||
|
return (dir->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME;
|
||||||
|
}
|
||||||
|
/** Mask for file/subdirectory tests */
|
||||||
|
uint8_t const DIR_ATT_FILE_TYPE_MASK = (DIR_ATT_VOLUME_ID | DIR_ATT_DIRECTORY);
|
||||||
|
/** Directory entry is for a file */
|
||||||
|
static inline uint8_t DIR_IS_FILE(const dir_t* dir) {
|
||||||
|
return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == 0;
|
||||||
|
}
|
||||||
|
/** Directory entry is for a subdirectory */
|
||||||
|
static inline uint8_t DIR_IS_SUBDIR(const dir_t* dir) {
|
||||||
|
return (dir->attributes & DIR_ATT_FILE_TYPE_MASK) == DIR_ATT_DIRECTORY;
|
||||||
|
}
|
||||||
|
/** Directory entry is for a file or subdirectory */
|
||||||
|
static inline uint8_t DIR_IS_FILE_OR_SUBDIR(const dir_t* dir) {
|
||||||
|
return (dir->attributes & DIR_ATT_VOLUME_ID) == 0;
|
||||||
|
}
|
||||||
|
#endif // FatStructs_h
|
||||||
777
libraries/SD/src/utility/Sd2Card.cpp
Executable file
777
libraries/SD/src/utility/Sd2Card.cpp
Executable file
|
|
@ -0,0 +1,777 @@
|
||||||
|
/* Arduino Sd2Card Library
|
||||||
|
Copyright (C) 2009 by William Greiman
|
||||||
|
|
||||||
|
This file is part of the Arduino Sd2Card Library
|
||||||
|
|
||||||
|
This Library is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 3 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This Library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with the Arduino Sd2Card Library. If not, see
|
||||||
|
<http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#define USE_SPI_LIB
|
||||||
|
#include <Arduino.h>
|
||||||
|
#include "Sd2Card.h"
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
#ifndef SOFTWARE_SPI
|
||||||
|
#ifdef USE_SPI_LIB
|
||||||
|
|
||||||
|
#ifndef SDCARD_SPI
|
||||||
|
#define SDCARD_SPI SPI
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#include <SPI.h>
|
||||||
|
static SPISettings settings;
|
||||||
|
#endif
|
||||||
|
// functions for hardware SPI
|
||||||
|
/** Send a byte to the card */
|
||||||
|
static void spiSend(uint8_t b) {
|
||||||
|
#ifndef USE_SPI_LIB
|
||||||
|
SPDR = b;
|
||||||
|
while (!(SPSR & (1 << SPIF)))
|
||||||
|
;
|
||||||
|
#else
|
||||||
|
SDCARD_SPI.transfer(b);
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
/** Receive a byte from the card */
|
||||||
|
static uint8_t spiRec(void) {
|
||||||
|
#ifndef USE_SPI_LIB
|
||||||
|
spiSend(0XFF);
|
||||||
|
return SPDR;
|
||||||
|
#else
|
||||||
|
return SDCARD_SPI.transfer(0xFF);
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
#else // SOFTWARE_SPI
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** nop to tune soft SPI timing */
|
||||||
|
#define nop asm volatile ("nop\n\t")
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** Soft SPI receive */
|
||||||
|
uint8_t spiRec(void) {
|
||||||
|
uint8_t data = 0;
|
||||||
|
// no interrupts during byte receive - about 8 us
|
||||||
|
cli();
|
||||||
|
// output pin high - like sending 0XFF
|
||||||
|
fastDigitalWrite(SPI_MOSI_PIN, HIGH);
|
||||||
|
|
||||||
|
for (uint8_t i = 0; i < 8; i++) {
|
||||||
|
fastDigitalWrite(SPI_SCK_PIN, HIGH);
|
||||||
|
|
||||||
|
// adjust so SCK is nice
|
||||||
|
nop;
|
||||||
|
nop;
|
||||||
|
|
||||||
|
data <<= 1;
|
||||||
|
|
||||||
|
if (fastDigitalRead(SPI_MISO_PIN)) {
|
||||||
|
data |= 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
fastDigitalWrite(SPI_SCK_PIN, LOW);
|
||||||
|
}
|
||||||
|
// enable interrupts
|
||||||
|
sei();
|
||||||
|
return data;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** Soft SPI send */
|
||||||
|
void spiSend(uint8_t data) {
|
||||||
|
// no interrupts during byte send - about 8 us
|
||||||
|
cli();
|
||||||
|
for (uint8_t i = 0; i < 8; i++) {
|
||||||
|
fastDigitalWrite(SPI_SCK_PIN, LOW);
|
||||||
|
|
||||||
|
fastDigitalWrite(SPI_MOSI_PIN, data & 0X80);
|
||||||
|
|
||||||
|
data <<= 1;
|
||||||
|
|
||||||
|
fastDigitalWrite(SPI_SCK_PIN, HIGH);
|
||||||
|
}
|
||||||
|
// hold SCK high for a few ns
|
||||||
|
nop;
|
||||||
|
nop;
|
||||||
|
nop;
|
||||||
|
nop;
|
||||||
|
|
||||||
|
fastDigitalWrite(SPI_SCK_PIN, LOW);
|
||||||
|
// enable interrupts
|
||||||
|
sei();
|
||||||
|
}
|
||||||
|
#endif // SOFTWARE_SPI
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// send command and return error code. Return zero for OK
|
||||||
|
uint8_t Sd2Card::cardCommand(uint8_t cmd, uint32_t arg) {
|
||||||
|
// end read if in partialBlockRead mode
|
||||||
|
readEnd();
|
||||||
|
|
||||||
|
// select card
|
||||||
|
chipSelectLow();
|
||||||
|
|
||||||
|
// wait up to 300 ms if busy
|
||||||
|
waitNotBusy(300);
|
||||||
|
|
||||||
|
// send command
|
||||||
|
spiSend(cmd | 0x40);
|
||||||
|
|
||||||
|
// send argument
|
||||||
|
for (int8_t s = 24; s >= 0; s -= 8) {
|
||||||
|
spiSend(arg >> s);
|
||||||
|
}
|
||||||
|
|
||||||
|
// send CRC
|
||||||
|
uint8_t crc = 0XFF;
|
||||||
|
if (cmd == CMD0) {
|
||||||
|
crc = 0X95; // correct crc for CMD0 with arg 0
|
||||||
|
}
|
||||||
|
if (cmd == CMD8) {
|
||||||
|
crc = 0X87; // correct crc for CMD8 with arg 0X1AA
|
||||||
|
}
|
||||||
|
spiSend(crc);
|
||||||
|
|
||||||
|
// wait for response
|
||||||
|
for (uint8_t i = 0; ((status_ = spiRec()) & 0X80) && i != 0XFF; i++)
|
||||||
|
;
|
||||||
|
return status_;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
Determine the size of an SD flash memory card.
|
||||||
|
|
||||||
|
\return The number of 512 byte data blocks in the card
|
||||||
|
or zero if an error occurs.
|
||||||
|
*/
|
||||||
|
uint32_t Sd2Card::cardSize(void) {
|
||||||
|
csd_t csd;
|
||||||
|
if (!readCSD(&csd)) {
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
if (csd.v1.csd_ver == 0) {
|
||||||
|
uint8_t read_bl_len = csd.v1.read_bl_len;
|
||||||
|
uint16_t c_size = (csd.v1.c_size_high << 10)
|
||||||
|
| (csd.v1.c_size_mid << 2) | csd.v1.c_size_low;
|
||||||
|
uint8_t c_size_mult = (csd.v1.c_size_mult_high << 1)
|
||||||
|
| csd.v1.c_size_mult_low;
|
||||||
|
return (uint32_t)(c_size + 1) << (c_size_mult + read_bl_len - 7);
|
||||||
|
} else if (csd.v2.csd_ver == 1) {
|
||||||
|
uint32_t c_size = ((uint32_t)csd.v2.c_size_high << 16)
|
||||||
|
| (csd.v2.c_size_mid << 8) | csd.v2.c_size_low;
|
||||||
|
return (c_size + 1) << 10;
|
||||||
|
} else {
|
||||||
|
error(SD_CARD_ERROR_BAD_CSD);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
static uint8_t chip_select_asserted = 0;
|
||||||
|
|
||||||
|
void Sd2Card::chipSelectHigh(void) {
|
||||||
|
digitalWrite(chipSelectPin_, HIGH);
|
||||||
|
#ifdef USE_SPI_LIB
|
||||||
|
if (chip_select_asserted) {
|
||||||
|
chip_select_asserted = 0;
|
||||||
|
SDCARD_SPI.endTransaction();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
void Sd2Card::chipSelectLow(void) {
|
||||||
|
#ifdef USE_SPI_LIB
|
||||||
|
if (!chip_select_asserted) {
|
||||||
|
chip_select_asserted = 1;
|
||||||
|
SDCARD_SPI.beginTransaction(settings);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
digitalWrite(chipSelectPin_, LOW);
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** Erase a range of blocks.
|
||||||
|
|
||||||
|
\param[in] firstBlock The address of the first block in the range.
|
||||||
|
\param[in] lastBlock The address of the last block in the range.
|
||||||
|
|
||||||
|
\note This function requests the SD card to do a flash erase for a
|
||||||
|
range of blocks. The data on the card after an erase operation is
|
||||||
|
either 0 or 1, depends on the card vendor. The card must support
|
||||||
|
single block erase.
|
||||||
|
|
||||||
|
\return The value one, true, is returned for success and
|
||||||
|
the value zero, false, is returned for failure.
|
||||||
|
*/
|
||||||
|
uint8_t Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) {
|
||||||
|
if (!eraseSingleBlockEnable()) {
|
||||||
|
error(SD_CARD_ERROR_ERASE_SINGLE_BLOCK);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
if (type_ != SD_CARD_TYPE_SDHC) {
|
||||||
|
firstBlock <<= 9;
|
||||||
|
lastBlock <<= 9;
|
||||||
|
}
|
||||||
|
if (cardCommand(CMD32, firstBlock)
|
||||||
|
|| cardCommand(CMD33, lastBlock)
|
||||||
|
|| cardCommand(CMD38, 0)) {
|
||||||
|
error(SD_CARD_ERROR_ERASE);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
if (!waitNotBusy(SD_ERASE_TIMEOUT)) {
|
||||||
|
error(SD_CARD_ERROR_ERASE_TIMEOUT);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
chipSelectHigh();
|
||||||
|
return true;
|
||||||
|
|
||||||
|
fail:
|
||||||
|
chipSelectHigh();
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** Determine if card supports single block erase.
|
||||||
|
|
||||||
|
\return The value one, true, is returned if single block erase is supported.
|
||||||
|
The value zero, false, is returned if single block erase is not supported.
|
||||||
|
*/
|
||||||
|
uint8_t Sd2Card::eraseSingleBlockEnable(void) {
|
||||||
|
csd_t csd;
|
||||||
|
return readCSD(&csd) ? csd.v1.erase_blk_en : 0;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
Initialize an SD flash memory card.
|
||||||
|
|
||||||
|
\param[in] sckRateID SPI clock rate selector. See setSckRate().
|
||||||
|
\param[in] chipSelectPin SD chip select pin number.
|
||||||
|
|
||||||
|
\return The value one, true, is returned for success and
|
||||||
|
the value zero, false, is returned for failure. The reason for failure
|
||||||
|
can be determined by calling errorCode() and errorData().
|
||||||
|
*/
|
||||||
|
uint8_t Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) {
|
||||||
|
errorCode_ = inBlock_ = partialBlockRead_ = type_ = 0;
|
||||||
|
chipSelectPin_ = chipSelectPin;
|
||||||
|
// 16-bit init start time allows over a minute
|
||||||
|
unsigned int t0 = millis();
|
||||||
|
uint32_t arg;
|
||||||
|
|
||||||
|
// set pin modes
|
||||||
|
pinMode(chipSelectPin_, OUTPUT);
|
||||||
|
digitalWrite(chipSelectPin_, HIGH);
|
||||||
|
#ifndef USE_SPI_LIB
|
||||||
|
pinMode(SPI_MISO_PIN, INPUT);
|
||||||
|
pinMode(SPI_MOSI_PIN, OUTPUT);
|
||||||
|
pinMode(SPI_SCK_PIN, OUTPUT);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef SOFTWARE_SPI
|
||||||
|
#ifndef USE_SPI_LIB
|
||||||
|
// SS must be in output mode even it is not chip select
|
||||||
|
pinMode(SS_PIN, OUTPUT);
|
||||||
|
digitalWrite(SS_PIN, HIGH); // disable any SPI device using hardware SS pin
|
||||||
|
// Enable SPI, Master, clock rate f_osc/128
|
||||||
|
SPCR = (1 << SPE) | (1 << MSTR) | (1 << SPR1) | (1 << SPR0);
|
||||||
|
// clear double speed
|
||||||
|
SPSR &= ~(1 << SPI2X);
|
||||||
|
#else // USE_SPI_LIB
|
||||||
|
SDCARD_SPI.begin();
|
||||||
|
settings = SPISettings(250000, MSBFIRST, SPI_MODE0);
|
||||||
|
#endif // USE_SPI_LIB
|
||||||
|
#endif // SOFTWARE_SPI
|
||||||
|
|
||||||
|
// must supply min of 74 clock cycles with CS high.
|
||||||
|
#ifdef USE_SPI_LIB
|
||||||
|
SDCARD_SPI.beginTransaction(settings);
|
||||||
|
#endif
|
||||||
|
for (uint8_t i = 0; i < 10; i++) {
|
||||||
|
spiSend(0XFF);
|
||||||
|
}
|
||||||
|
#ifdef USE_SPI_LIB
|
||||||
|
SDCARD_SPI.endTransaction();
|
||||||
|
#endif
|
||||||
|
|
||||||
|
chipSelectLow();
|
||||||
|
|
||||||
|
// command to go idle in SPI mode
|
||||||
|
while ((status_ = cardCommand(CMD0, 0)) != R1_IDLE_STATE) {
|
||||||
|
unsigned int d = millis() - t0;
|
||||||
|
if (d > SD_INIT_TIMEOUT) {
|
||||||
|
error(SD_CARD_ERROR_CMD0);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
// check SD version
|
||||||
|
if ((cardCommand(CMD8, 0x1AA) & R1_ILLEGAL_COMMAND)) {
|
||||||
|
type(SD_CARD_TYPE_SD1);
|
||||||
|
} else {
|
||||||
|
// only need last byte of r7 response
|
||||||
|
for (uint8_t i = 0; i < 4; i++) {
|
||||||
|
status_ = spiRec();
|
||||||
|
}
|
||||||
|
if (status_ != 0XAA) {
|
||||||
|
error(SD_CARD_ERROR_CMD8);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
type(SD_CARD_TYPE_SD2);
|
||||||
|
}
|
||||||
|
// initialize card and send host supports SDHC if SD2
|
||||||
|
arg = type() == SD_CARD_TYPE_SD2 ? 0X40000000 : 0;
|
||||||
|
|
||||||
|
while ((status_ = cardAcmd(ACMD41, arg)) != R1_READY_STATE) {
|
||||||
|
// check for timeout
|
||||||
|
unsigned int d = millis() - t0;
|
||||||
|
if (d > SD_INIT_TIMEOUT) {
|
||||||
|
error(SD_CARD_ERROR_ACMD41);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
// if SD2 read OCR register to check for SDHC card
|
||||||
|
if (type() == SD_CARD_TYPE_SD2) {
|
||||||
|
if (cardCommand(CMD58, 0)) {
|
||||||
|
error(SD_CARD_ERROR_CMD58);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
if ((spiRec() & 0XC0) == 0XC0) {
|
||||||
|
type(SD_CARD_TYPE_SDHC);
|
||||||
|
}
|
||||||
|
// discard rest of ocr - contains allowed voltage range
|
||||||
|
for (uint8_t i = 0; i < 3; i++) {
|
||||||
|
spiRec();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
chipSelectHigh();
|
||||||
|
|
||||||
|
#ifndef SOFTWARE_SPI
|
||||||
|
return setSckRate(sckRateID);
|
||||||
|
#else // SOFTWARE_SPI
|
||||||
|
return true;
|
||||||
|
#endif // SOFTWARE_SPI
|
||||||
|
|
||||||
|
fail:
|
||||||
|
chipSelectHigh();
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
Enable or disable partial block reads.
|
||||||
|
|
||||||
|
Enabling partial block reads improves performance by allowing a block
|
||||||
|
to be read over the SPI bus as several sub-blocks. Errors may occur
|
||||||
|
if the time between reads is too long since the SD card may timeout.
|
||||||
|
The SPI SS line will be held low until the entire block is read or
|
||||||
|
readEnd() is called.
|
||||||
|
|
||||||
|
Use this for applications like the Adafruit Wave Shield.
|
||||||
|
|
||||||
|
\param[in] value The value TRUE (non-zero) or FALSE (zero).)
|
||||||
|
*/
|
||||||
|
void Sd2Card::partialBlockRead(uint8_t value) {
|
||||||
|
readEnd();
|
||||||
|
partialBlockRead_ = value;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
Read a 512 byte block from an SD card device.
|
||||||
|
|
||||||
|
\param[in] block Logical block to be read.
|
||||||
|
\param[out] dst Pointer to the location that will receive the data.
|
||||||
|
|
||||||
|
\return The value one, true, is returned for success and
|
||||||
|
the value zero, false, is returned for failure.
|
||||||
|
*/
|
||||||
|
uint8_t Sd2Card::readBlock(uint32_t block, uint8_t* dst) {
|
||||||
|
return readData(block, 0, 512, dst);
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
Read part of a 512 byte block from an SD card.
|
||||||
|
|
||||||
|
\param[in] block Logical block to be read.
|
||||||
|
\param[in] offset Number of bytes to skip at start of block
|
||||||
|
\param[out] dst Pointer to the location that will receive the data.
|
||||||
|
\param[in] count Number of bytes to read
|
||||||
|
\return The value one, true, is returned for success and
|
||||||
|
the value zero, false, is returned for failure.
|
||||||
|
*/
|
||||||
|
uint8_t Sd2Card::readData(uint32_t block,
|
||||||
|
uint16_t offset, uint16_t count, uint8_t* dst) {
|
||||||
|
if (count == 0) {
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
if ((count + offset) > 512) {
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
if (!inBlock_ || block != block_ || offset < offset_) {
|
||||||
|
block_ = block;
|
||||||
|
// use address if not SDHC card
|
||||||
|
if (type() != SD_CARD_TYPE_SDHC) {
|
||||||
|
block <<= 9;
|
||||||
|
}
|
||||||
|
if (cardCommand(CMD17, block)) {
|
||||||
|
error(SD_CARD_ERROR_CMD17);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
if (!waitStartBlock()) {
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
offset_ = 0;
|
||||||
|
inBlock_ = 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef OPTIMIZE_HARDWARE_SPI
|
||||||
|
// start first spi transfer
|
||||||
|
SPDR = 0XFF;
|
||||||
|
|
||||||
|
// skip data before offset
|
||||||
|
for (; offset_ < offset; offset_++) {
|
||||||
|
while (!(SPSR & (1 << SPIF)))
|
||||||
|
;
|
||||||
|
SPDR = 0XFF;
|
||||||
|
}
|
||||||
|
// transfer data
|
||||||
|
n = count - 1;
|
||||||
|
for (uint16_t i = 0; i < n; i++) {
|
||||||
|
while (!(SPSR & (1 << SPIF)))
|
||||||
|
;
|
||||||
|
dst[i] = SPDR;
|
||||||
|
SPDR = 0XFF;
|
||||||
|
}
|
||||||
|
// wait for last byte
|
||||||
|
while (!(SPSR & (1 << SPIF)))
|
||||||
|
;
|
||||||
|
dst[n] = SPDR;
|
||||||
|
|
||||||
|
#else // OPTIMIZE_HARDWARE_SPI
|
||||||
|
|
||||||
|
// skip data before offset
|
||||||
|
for (; offset_ < offset; offset_++) {
|
||||||
|
spiRec();
|
||||||
|
}
|
||||||
|
// transfer data
|
||||||
|
for (uint16_t i = 0; i < count; i++) {
|
||||||
|
dst[i] = spiRec();
|
||||||
|
}
|
||||||
|
#endif // OPTIMIZE_HARDWARE_SPI
|
||||||
|
|
||||||
|
offset_ += count;
|
||||||
|
if (!partialBlockRead_ || offset_ >= 512) {
|
||||||
|
// read rest of data, checksum and set chip select high
|
||||||
|
readEnd();
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
|
||||||
|
fail:
|
||||||
|
chipSelectHigh();
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** Skip remaining data in a block when in partial block read mode. */
|
||||||
|
void Sd2Card::readEnd(void) {
|
||||||
|
if (inBlock_) {
|
||||||
|
// skip data and crc
|
||||||
|
#ifdef OPTIMIZE_HARDWARE_SPI
|
||||||
|
// optimize skip for hardware
|
||||||
|
SPDR = 0XFF;
|
||||||
|
while (offset_++ < 513) {
|
||||||
|
while (!(SPSR & (1 << SPIF)))
|
||||||
|
;
|
||||||
|
SPDR = 0XFF;
|
||||||
|
}
|
||||||
|
// wait for last crc byte
|
||||||
|
while (!(SPSR & (1 << SPIF)))
|
||||||
|
;
|
||||||
|
#else // OPTIMIZE_HARDWARE_SPI
|
||||||
|
while (offset_++ < 514) {
|
||||||
|
spiRec();
|
||||||
|
}
|
||||||
|
#endif // OPTIMIZE_HARDWARE_SPI
|
||||||
|
chipSelectHigh();
|
||||||
|
inBlock_ = 0;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** read CID or CSR register */
|
||||||
|
uint8_t Sd2Card::readRegister(uint8_t cmd, void* buf) {
|
||||||
|
uint8_t* dst = reinterpret_cast<uint8_t*>(buf);
|
||||||
|
if (cardCommand(cmd, 0)) {
|
||||||
|
error(SD_CARD_ERROR_READ_REG);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
if (!waitStartBlock()) {
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
// transfer data
|
||||||
|
for (uint16_t i = 0; i < 16; i++) {
|
||||||
|
dst[i] = spiRec();
|
||||||
|
}
|
||||||
|
spiRec(); // get first crc byte
|
||||||
|
spiRec(); // get second crc byte
|
||||||
|
chipSelectHigh();
|
||||||
|
return true;
|
||||||
|
|
||||||
|
fail:
|
||||||
|
chipSelectHigh();
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
Set the SPI clock rate.
|
||||||
|
|
||||||
|
\param[in] sckRateID A value in the range [0, 6].
|
||||||
|
|
||||||
|
The SPI clock will be set to F_CPU/pow(2, 1 + sckRateID). The maximum
|
||||||
|
SPI rate is F_CPU/2 for \a sckRateID = 0 and the minimum rate is F_CPU/128
|
||||||
|
for \a scsRateID = 6.
|
||||||
|
|
||||||
|
\return The value one, true, is returned for success and the value zero,
|
||||||
|
false, is returned for an invalid value of \a sckRateID.
|
||||||
|
*/
|
||||||
|
uint8_t Sd2Card::setSckRate(uint8_t sckRateID) {
|
||||||
|
if (sckRateID > 6) {
|
||||||
|
error(SD_CARD_ERROR_SCK_RATE);
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
#ifndef USE_SPI_LIB
|
||||||
|
// see avr processor datasheet for SPI register bit definitions
|
||||||
|
if ((sckRateID & 1) || sckRateID == 6) {
|
||||||
|
SPSR &= ~(1 << SPI2X);
|
||||||
|
} else {
|
||||||
|
SPSR |= (1 << SPI2X);
|
||||||
|
}
|
||||||
|
SPCR &= ~((1 << SPR1) | (1 << SPR0));
|
||||||
|
SPCR |= (sckRateID & 4 ? (1 << SPR1) : 0)
|
||||||
|
| (sckRateID & 2 ? (1 << SPR0) : 0);
|
||||||
|
#else // USE_SPI_LIB
|
||||||
|
switch (sckRateID) {
|
||||||
|
case 0: settings = SPISettings(25000000, MSBFIRST, SPI_MODE0); break;
|
||||||
|
case 1: settings = SPISettings(4000000, MSBFIRST, SPI_MODE0); break;
|
||||||
|
case 2: settings = SPISettings(2000000, MSBFIRST, SPI_MODE0); break;
|
||||||
|
case 3: settings = SPISettings(1000000, MSBFIRST, SPI_MODE0); break;
|
||||||
|
case 4: settings = SPISettings(500000, MSBFIRST, SPI_MODE0); break;
|
||||||
|
case 5: settings = SPISettings(250000, MSBFIRST, SPI_MODE0); break;
|
||||||
|
default: settings = SPISettings(125000, MSBFIRST, SPI_MODE0);
|
||||||
|
}
|
||||||
|
#endif // USE_SPI_LIB
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
#ifdef USE_SPI_LIB
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// set the SPI clock frequency
|
||||||
|
uint8_t Sd2Card::setSpiClock(uint32_t clock) {
|
||||||
|
settings = SPISettings(clock, MSBFIRST, SPI_MODE0);
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// wait for card to go not busy
|
||||||
|
uint8_t Sd2Card::waitNotBusy(unsigned int timeoutMillis) {
|
||||||
|
unsigned int t0 = millis();
|
||||||
|
unsigned int d;
|
||||||
|
do {
|
||||||
|
if (spiRec() == 0XFF) {
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
d = millis() - t0;
|
||||||
|
} while (d < timeoutMillis);
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** Wait for start block token */
|
||||||
|
uint8_t Sd2Card::waitStartBlock(void) {
|
||||||
|
unsigned int t0 = millis();
|
||||||
|
while ((status_ = spiRec()) == 0XFF) {
|
||||||
|
unsigned int d = millis() - t0;
|
||||||
|
if (d > SD_READ_TIMEOUT) {
|
||||||
|
error(SD_CARD_ERROR_READ_TIMEOUT);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (status_ != DATA_START_BLOCK) {
|
||||||
|
error(SD_CARD_ERROR_READ);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
|
||||||
|
fail:
|
||||||
|
chipSelectHigh();
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
Writes a 512 byte block to an SD card.
|
||||||
|
|
||||||
|
\param[in] blockNumber Logical block to be written.
|
||||||
|
\param[in] src Pointer to the location of the data to be written.
|
||||||
|
\param[in] blocking If the write should be blocking.
|
||||||
|
\return The value one, true, is returned for success and
|
||||||
|
the value zero, false, is returned for failure.
|
||||||
|
*/
|
||||||
|
uint8_t Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src, uint8_t blocking) {
|
||||||
|
#if SD_PROTECT_BLOCK_ZERO
|
||||||
|
// don't allow write to first block
|
||||||
|
if (blockNumber == 0) {
|
||||||
|
error(SD_CARD_ERROR_WRITE_BLOCK_ZERO);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
#endif // SD_PROTECT_BLOCK_ZERO
|
||||||
|
|
||||||
|
// use address if not SDHC card
|
||||||
|
if (type() != SD_CARD_TYPE_SDHC) {
|
||||||
|
blockNumber <<= 9;
|
||||||
|
}
|
||||||
|
if (cardCommand(CMD24, blockNumber)) {
|
||||||
|
error(SD_CARD_ERROR_CMD24);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
if (!writeData(DATA_START_BLOCK, src)) {
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
if (blocking) {
|
||||||
|
// wait for flash programming to complete
|
||||||
|
if (!waitNotBusy(SD_WRITE_TIMEOUT)) {
|
||||||
|
error(SD_CARD_ERROR_WRITE_TIMEOUT);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
// response is r2 so get and check two bytes for nonzero
|
||||||
|
if (cardCommand(CMD13, 0) || spiRec()) {
|
||||||
|
error(SD_CARD_ERROR_WRITE_PROGRAMMING);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
chipSelectHigh();
|
||||||
|
return true;
|
||||||
|
|
||||||
|
fail:
|
||||||
|
chipSelectHigh();
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** Write one data block in a multiple block write sequence */
|
||||||
|
uint8_t Sd2Card::writeData(const uint8_t* src) {
|
||||||
|
// wait for previous write to finish
|
||||||
|
if (!waitNotBusy(SD_WRITE_TIMEOUT)) {
|
||||||
|
error(SD_CARD_ERROR_WRITE_MULTIPLE);
|
||||||
|
chipSelectHigh();
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
return writeData(WRITE_MULTIPLE_TOKEN, src);
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// send one block of data for write block or write multiple blocks
|
||||||
|
uint8_t Sd2Card::writeData(uint8_t token, const uint8_t* src) {
|
||||||
|
#ifdef OPTIMIZE_HARDWARE_SPI
|
||||||
|
|
||||||
|
// send data - optimized loop
|
||||||
|
SPDR = token;
|
||||||
|
|
||||||
|
// send two byte per iteration
|
||||||
|
for (uint16_t i = 0; i < 512; i += 2) {
|
||||||
|
while (!(SPSR & (1 << SPIF)))
|
||||||
|
;
|
||||||
|
SPDR = src[i];
|
||||||
|
while (!(SPSR & (1 << SPIF)))
|
||||||
|
;
|
||||||
|
SPDR = src[i + 1];
|
||||||
|
}
|
||||||
|
|
||||||
|
// wait for last data byte
|
||||||
|
while (!(SPSR & (1 << SPIF)))
|
||||||
|
;
|
||||||
|
|
||||||
|
#else // OPTIMIZE_HARDWARE_SPI
|
||||||
|
spiSend(token);
|
||||||
|
for (uint16_t i = 0; i < 512; i++) {
|
||||||
|
spiSend(src[i]);
|
||||||
|
}
|
||||||
|
#endif // OPTIMIZE_HARDWARE_SPI
|
||||||
|
spiSend(0xff); // dummy crc
|
||||||
|
spiSend(0xff); // dummy crc
|
||||||
|
|
||||||
|
status_ = spiRec();
|
||||||
|
if ((status_ & DATA_RES_MASK) != DATA_RES_ACCEPTED) {
|
||||||
|
error(SD_CARD_ERROR_WRITE);
|
||||||
|
chipSelectHigh();
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** Start a write multiple blocks sequence.
|
||||||
|
|
||||||
|
\param[in] blockNumber Address of first block in sequence.
|
||||||
|
\param[in] eraseCount The number of blocks to be pre-erased.
|
||||||
|
|
||||||
|
\note This function is used with writeData() and writeStop()
|
||||||
|
for optimized multiple block writes.
|
||||||
|
|
||||||
|
\return The value one, true, is returned for success and
|
||||||
|
the value zero, false, is returned for failure.
|
||||||
|
*/
|
||||||
|
uint8_t Sd2Card::writeStart(uint32_t blockNumber, uint32_t eraseCount) {
|
||||||
|
#if SD_PROTECT_BLOCK_ZERO
|
||||||
|
// don't allow write to first block
|
||||||
|
if (blockNumber == 0) {
|
||||||
|
error(SD_CARD_ERROR_WRITE_BLOCK_ZERO);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
#endif // SD_PROTECT_BLOCK_ZERO
|
||||||
|
// send pre-erase count
|
||||||
|
if (cardAcmd(ACMD23, eraseCount)) {
|
||||||
|
error(SD_CARD_ERROR_ACMD23);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
// use address if not SDHC card
|
||||||
|
if (type() != SD_CARD_TYPE_SDHC) {
|
||||||
|
blockNumber <<= 9;
|
||||||
|
}
|
||||||
|
if (cardCommand(CMD25, blockNumber)) {
|
||||||
|
error(SD_CARD_ERROR_CMD25);
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
|
||||||
|
fail:
|
||||||
|
chipSelectHigh();
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** End a write multiple blocks sequence.
|
||||||
|
|
||||||
|
\return The value one, true, is returned for success and
|
||||||
|
the value zero, false, is returned for failure.
|
||||||
|
*/
|
||||||
|
uint8_t Sd2Card::writeStop(void) {
|
||||||
|
if (!waitNotBusy(SD_WRITE_TIMEOUT)) {
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
spiSend(STOP_TRAN_TOKEN);
|
||||||
|
if (!waitNotBusy(SD_WRITE_TIMEOUT)) {
|
||||||
|
goto fail;
|
||||||
|
}
|
||||||
|
chipSelectHigh();
|
||||||
|
return true;
|
||||||
|
|
||||||
|
fail:
|
||||||
|
error(SD_CARD_ERROR_STOP_TRAN);
|
||||||
|
chipSelectHigh();
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** Check if the SD card is busy
|
||||||
|
|
||||||
|
\return The value one, true, is returned when is busy and
|
||||||
|
the value zero, false, is returned for when is NOT busy.
|
||||||
|
*/
|
||||||
|
uint8_t Sd2Card::isBusy(void) {
|
||||||
|
chipSelectLow();
|
||||||
|
byte b = spiRec();
|
||||||
|
chipSelectHigh();
|
||||||
|
|
||||||
|
return (b != 0XFF);
|
||||||
|
}
|
||||||
273
libraries/SD/src/utility/Sd2Card.h
Executable file
273
libraries/SD/src/utility/Sd2Card.h
Executable file
|
|
@ -0,0 +1,273 @@
|
||||||
|
/* Arduino Sd2Card Library
|
||||||
|
Copyright (C) 2009 by William Greiman
|
||||||
|
|
||||||
|
This file is part of the Arduino Sd2Card Library
|
||||||
|
|
||||||
|
This Library is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 3 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This Library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with the Arduino Sd2Card Library. If not, see
|
||||||
|
<http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#ifndef Sd2Card_h
|
||||||
|
#define Sd2Card_h
|
||||||
|
/**
|
||||||
|
\file
|
||||||
|
Sd2Card class
|
||||||
|
*/
|
||||||
|
#include "Sd2PinMap.h"
|
||||||
|
#include "SdInfo.h"
|
||||||
|
/** Set SCK to max rate of F_CPU/2. See Sd2Card::setSckRate(). */
|
||||||
|
uint8_t const SPI_FULL_SPEED = 0;
|
||||||
|
/** Set SCK rate to F_CPU/4. See Sd2Card::setSckRate(). */
|
||||||
|
uint8_t const SPI_HALF_SPEED = 1;
|
||||||
|
/** Set SCK rate to F_CPU/8. Sd2Card::setSckRate(). */
|
||||||
|
uint8_t const SPI_QUARTER_SPEED = 2;
|
||||||
|
/**
|
||||||
|
USE_SPI_LIB: if set, use the SPI library bundled with Arduino IDE, otherwise
|
||||||
|
run with a standalone driver for AVR.
|
||||||
|
*/
|
||||||
|
#define USE_SPI_LIB
|
||||||
|
/**
|
||||||
|
Define MEGA_SOFT_SPI non-zero to use software SPI on Mega Arduinos.
|
||||||
|
Pins used are SS 10, MOSI 11, MISO 12, and SCK 13.
|
||||||
|
|
||||||
|
MEGA_SOFT_SPI allows an unmodified Adafruit GPS Shield to be used
|
||||||
|
on Mega Arduinos. Software SPI works well with GPS Shield V1.1
|
||||||
|
but many SD cards will fail with GPS Shield V1.0.
|
||||||
|
*/
|
||||||
|
#define MEGA_SOFT_SPI 0
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
#if MEGA_SOFT_SPI && (defined(__AVR_ATmega1280__)||defined(__AVR_ATmega2560__))
|
||||||
|
#define SOFTWARE_SPI
|
||||||
|
#endif // MEGA_SOFT_SPI
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// SPI pin definitions
|
||||||
|
//
|
||||||
|
#ifndef SOFTWARE_SPI
|
||||||
|
// hardware pin defs
|
||||||
|
|
||||||
|
// include pins_arduino.h or variant.h depending on architecture, via Arduino.h
|
||||||
|
#include <Arduino.h>
|
||||||
|
|
||||||
|
/**
|
||||||
|
SD Chip Select pin
|
||||||
|
|
||||||
|
Warning if this pin is redefined the hardware SS will pin will be enabled
|
||||||
|
as an output by init(). An avr processor will not function as an SPI
|
||||||
|
master unless SS is set to output mode.
|
||||||
|
*/
|
||||||
|
#ifndef SDCARD_SS_PIN
|
||||||
|
/** The default chip select pin for the SD card is SS. */
|
||||||
|
uint8_t const SD_CHIP_SELECT_PIN = SS;
|
||||||
|
#else
|
||||||
|
uint8_t const SD_CHIP_SELECT_PIN = SDCARD_SS_PIN;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// The following three pins must not be redefined for hardware SPI,
|
||||||
|
// so ensure that they are taken from pins_arduino.h or variant.h, depending on architecture.
|
||||||
|
#ifndef SDCARD_MOSI_PIN
|
||||||
|
/** SPI Master Out Slave In pin */
|
||||||
|
uint8_t const SPI_MOSI_PIN = MOSI;
|
||||||
|
/** SPI Master In Slave Out pin */
|
||||||
|
uint8_t const SPI_MISO_PIN = MISO;
|
||||||
|
/** SPI Clock pin */
|
||||||
|
uint8_t const SPI_SCK_PIN = SCK;
|
||||||
|
#else
|
||||||
|
uint8_t const SPI_MOSI_PIN = SDCARD_MOSI_PIN;
|
||||||
|
uint8_t const SPI_MISO_PIN = SDCARD_MISO_PIN;
|
||||||
|
uint8_t const SPI_SCK_PIN = SDCARD_SCK_PIN;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/** optimize loops for hardware SPI */
|
||||||
|
#ifndef USE_SPI_LIB
|
||||||
|
#define OPTIMIZE_HARDWARE_SPI
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#else // SOFTWARE_SPI
|
||||||
|
// define software SPI pins so Mega can use unmodified GPS Shield
|
||||||
|
/** SPI chip select pin */
|
||||||
|
uint8_t const SD_CHIP_SELECT_PIN = 10;
|
||||||
|
/** SPI Master Out Slave In pin */
|
||||||
|
uint8_t const SPI_MOSI_PIN = 11;
|
||||||
|
/** SPI Master In Slave Out pin */
|
||||||
|
uint8_t const SPI_MISO_PIN = 12;
|
||||||
|
/** SPI Clock pin */
|
||||||
|
uint8_t const SPI_SCK_PIN = 13;
|
||||||
|
#endif // SOFTWARE_SPI
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** Protect block zero from write if nonzero */
|
||||||
|
#define SD_PROTECT_BLOCK_ZERO 1
|
||||||
|
/** init timeout ms */
|
||||||
|
unsigned int const SD_INIT_TIMEOUT = 2000;
|
||||||
|
/** erase timeout ms */
|
||||||
|
unsigned int const SD_ERASE_TIMEOUT = 10000;
|
||||||
|
/** read timeout ms */
|
||||||
|
unsigned int const SD_READ_TIMEOUT = 300;
|
||||||
|
/** write time out ms */
|
||||||
|
unsigned int const SD_WRITE_TIMEOUT = 600;
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// SD card errors
|
||||||
|
/** timeout error for command CMD0 */
|
||||||
|
uint8_t const SD_CARD_ERROR_CMD0 = 0X1;
|
||||||
|
/** CMD8 was not accepted - not a valid SD card*/
|
||||||
|
uint8_t const SD_CARD_ERROR_CMD8 = 0X2;
|
||||||
|
/** card returned an error response for CMD17 (read block) */
|
||||||
|
uint8_t const SD_CARD_ERROR_CMD17 = 0X3;
|
||||||
|
/** card returned an error response for CMD24 (write block) */
|
||||||
|
uint8_t const SD_CARD_ERROR_CMD24 = 0X4;
|
||||||
|
/** WRITE_MULTIPLE_BLOCKS command failed */
|
||||||
|
uint8_t const SD_CARD_ERROR_CMD25 = 0X05;
|
||||||
|
/** card returned an error response for CMD58 (read OCR) */
|
||||||
|
uint8_t const SD_CARD_ERROR_CMD58 = 0X06;
|
||||||
|
/** SET_WR_BLK_ERASE_COUNT failed */
|
||||||
|
uint8_t const SD_CARD_ERROR_ACMD23 = 0X07;
|
||||||
|
/** card's ACMD41 initialization process timeout */
|
||||||
|
uint8_t const SD_CARD_ERROR_ACMD41 = 0X08;
|
||||||
|
/** card returned a bad CSR version field */
|
||||||
|
uint8_t const SD_CARD_ERROR_BAD_CSD = 0X09;
|
||||||
|
/** erase block group command failed */
|
||||||
|
uint8_t const SD_CARD_ERROR_ERASE = 0X0A;
|
||||||
|
/** card not capable of single block erase */
|
||||||
|
uint8_t const SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0X0B;
|
||||||
|
/** Erase sequence timed out */
|
||||||
|
uint8_t const SD_CARD_ERROR_ERASE_TIMEOUT = 0X0C;
|
||||||
|
/** card returned an error token instead of read data */
|
||||||
|
uint8_t const SD_CARD_ERROR_READ = 0X0D;
|
||||||
|
/** read CID or CSD failed */
|
||||||
|
uint8_t const SD_CARD_ERROR_READ_REG = 0X0E;
|
||||||
|
/** timeout while waiting for start of read data */
|
||||||
|
uint8_t const SD_CARD_ERROR_READ_TIMEOUT = 0X0F;
|
||||||
|
/** card did not accept STOP_TRAN_TOKEN */
|
||||||
|
uint8_t const SD_CARD_ERROR_STOP_TRAN = 0X10;
|
||||||
|
/** card returned an error token as a response to a write operation */
|
||||||
|
uint8_t const SD_CARD_ERROR_WRITE = 0X11;
|
||||||
|
/** attempt to write protected block zero */
|
||||||
|
uint8_t const SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0X12;
|
||||||
|
/** card did not go ready for a multiple block write */
|
||||||
|
uint8_t const SD_CARD_ERROR_WRITE_MULTIPLE = 0X13;
|
||||||
|
/** card returned an error to a CMD13 status check after a write */
|
||||||
|
uint8_t const SD_CARD_ERROR_WRITE_PROGRAMMING = 0X14;
|
||||||
|
/** timeout occurred during write programming */
|
||||||
|
uint8_t const SD_CARD_ERROR_WRITE_TIMEOUT = 0X15;
|
||||||
|
/** incorrect rate selected */
|
||||||
|
uint8_t const SD_CARD_ERROR_SCK_RATE = 0X16;
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// card types
|
||||||
|
/** Standard capacity V1 SD card */
|
||||||
|
uint8_t const SD_CARD_TYPE_SD1 = 1;
|
||||||
|
/** Standard capacity V2 SD card */
|
||||||
|
uint8_t const SD_CARD_TYPE_SD2 = 2;
|
||||||
|
/** High Capacity SD card */
|
||||||
|
uint8_t const SD_CARD_TYPE_SDHC = 3;
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
\class Sd2Card
|
||||||
|
\brief Raw access to SD and SDHC flash memory cards.
|
||||||
|
*/
|
||||||
|
class Sd2Card {
|
||||||
|
public:
|
||||||
|
/** Construct an instance of Sd2Card. */
|
||||||
|
Sd2Card(void) : errorCode_(0), inBlock_(0), partialBlockRead_(0), type_(0) {}
|
||||||
|
uint32_t cardSize(void);
|
||||||
|
uint8_t erase(uint32_t firstBlock, uint32_t lastBlock);
|
||||||
|
uint8_t eraseSingleBlockEnable(void);
|
||||||
|
/**
|
||||||
|
\return error code for last error. See Sd2Card.h for a list of error codes.
|
||||||
|
*/
|
||||||
|
uint8_t errorCode(void) const {
|
||||||
|
return errorCode_;
|
||||||
|
}
|
||||||
|
/** \return error data for last error. */
|
||||||
|
uint8_t errorData(void) const {
|
||||||
|
return status_;
|
||||||
|
}
|
||||||
|
/**
|
||||||
|
Initialize an SD flash memory card with default clock rate and chip
|
||||||
|
select pin. See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin).
|
||||||
|
*/
|
||||||
|
uint8_t init(void) {
|
||||||
|
return init(SPI_FULL_SPEED, SD_CHIP_SELECT_PIN);
|
||||||
|
}
|
||||||
|
/**
|
||||||
|
Initialize an SD flash memory card with the selected SPI clock rate
|
||||||
|
and the default SD chip select pin.
|
||||||
|
See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin).
|
||||||
|
*/
|
||||||
|
uint8_t init(uint8_t sckRateID) {
|
||||||
|
return init(sckRateID, SD_CHIP_SELECT_PIN);
|
||||||
|
}
|
||||||
|
uint8_t init(uint8_t sckRateID, uint8_t chipSelectPin);
|
||||||
|
void partialBlockRead(uint8_t value);
|
||||||
|
/** Returns the current value, true or false, for partial block read. */
|
||||||
|
uint8_t partialBlockRead(void) const {
|
||||||
|
return partialBlockRead_;
|
||||||
|
}
|
||||||
|
uint8_t readBlock(uint32_t block, uint8_t* dst);
|
||||||
|
uint8_t readData(uint32_t block,
|
||||||
|
uint16_t offset, uint16_t count, uint8_t* dst);
|
||||||
|
/**
|
||||||
|
Read a cards CID register. The CID contains card identification
|
||||||
|
information such as Manufacturer ID, Product name, Product serial
|
||||||
|
number and Manufacturing date. */
|
||||||
|
uint8_t readCID(cid_t* cid) {
|
||||||
|
return readRegister(CMD10, cid);
|
||||||
|
}
|
||||||
|
/**
|
||||||
|
Read a cards CSD register. The CSD contains Card-Specific Data that
|
||||||
|
provides information regarding access to the card's contents. */
|
||||||
|
uint8_t readCSD(csd_t* csd) {
|
||||||
|
return readRegister(CMD9, csd);
|
||||||
|
}
|
||||||
|
void readEnd(void);
|
||||||
|
uint8_t setSckRate(uint8_t sckRateID);
|
||||||
|
#ifdef USE_SPI_LIB
|
||||||
|
uint8_t setSpiClock(uint32_t clock);
|
||||||
|
#endif
|
||||||
|
/** Return the card type: SD V1, SD V2 or SDHC */
|
||||||
|
uint8_t type(void) const {
|
||||||
|
return type_;
|
||||||
|
}
|
||||||
|
uint8_t writeBlock(uint32_t blockNumber, const uint8_t* src, uint8_t blocking = 1);
|
||||||
|
uint8_t writeData(const uint8_t* src);
|
||||||
|
uint8_t writeStart(uint32_t blockNumber, uint32_t eraseCount);
|
||||||
|
uint8_t writeStop(void);
|
||||||
|
uint8_t isBusy(void);
|
||||||
|
private:
|
||||||
|
uint32_t block_;
|
||||||
|
uint8_t chipSelectPin_;
|
||||||
|
uint8_t errorCode_;
|
||||||
|
uint8_t inBlock_;
|
||||||
|
uint16_t offset_;
|
||||||
|
uint8_t partialBlockRead_;
|
||||||
|
uint8_t status_;
|
||||||
|
uint8_t type_;
|
||||||
|
// private functions
|
||||||
|
uint8_t cardAcmd(uint8_t cmd, uint32_t arg) {
|
||||||
|
cardCommand(CMD55, 0);
|
||||||
|
return cardCommand(cmd, arg);
|
||||||
|
}
|
||||||
|
uint8_t cardCommand(uint8_t cmd, uint32_t arg);
|
||||||
|
void error(uint8_t code) {
|
||||||
|
errorCode_ = code;
|
||||||
|
}
|
||||||
|
uint8_t readRegister(uint8_t cmd, void* buf);
|
||||||
|
uint8_t sendWriteCommand(uint32_t blockNumber, uint32_t eraseCount);
|
||||||
|
void chipSelectHigh(void);
|
||||||
|
void chipSelectLow(void);
|
||||||
|
void type(uint8_t value) {
|
||||||
|
type_ = value;
|
||||||
|
}
|
||||||
|
uint8_t waitNotBusy(unsigned int timeoutMillis);
|
||||||
|
uint8_t writeData(uint8_t token, const uint8_t* src);
|
||||||
|
uint8_t waitStartBlock(void);
|
||||||
|
};
|
||||||
|
#endif // Sd2Card_h
|
||||||
525
libraries/SD/src/utility/Sd2PinMap.h
Executable file
525
libraries/SD/src/utility/Sd2PinMap.h
Executable file
|
|
@ -0,0 +1,525 @@
|
||||||
|
/* Arduino SdFat Library
|
||||||
|
Copyright (C) 2010 by William Greiman
|
||||||
|
|
||||||
|
This file is part of the Arduino SdFat Library
|
||||||
|
|
||||||
|
This Library is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 3 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This Library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with the Arduino SdFat Library. If not, see
|
||||||
|
<http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#if defined(__arm__) // Arduino Due Board follows
|
||||||
|
|
||||||
|
#ifndef Sd2PinMap_h
|
||||||
|
#define Sd2PinMap_h
|
||||||
|
|
||||||
|
#include <Arduino.h>
|
||||||
|
|
||||||
|
uint8_t const SS_PIN = SS;
|
||||||
|
uint8_t const MOSI_PIN = MOSI;
|
||||||
|
uint8_t const MISO_PIN = MISO;
|
||||||
|
uint8_t const SCK_PIN = SCK;
|
||||||
|
|
||||||
|
#endif // Sd2PinMap_h
|
||||||
|
|
||||||
|
#elif defined(__AVR_ATmega4809__) // Arduino UNO WiFI Rev2 follows
|
||||||
|
|
||||||
|
#ifndef Sd2PinMap_h
|
||||||
|
#define Sd2PinMap_h
|
||||||
|
|
||||||
|
#include <Arduino.h>
|
||||||
|
|
||||||
|
uint8_t const SS_PIN = SS;
|
||||||
|
uint8_t const MOSI_PIN = MOSI;
|
||||||
|
uint8_t const MISO_PIN = MISO;
|
||||||
|
uint8_t const SCK_PIN = SCK;
|
||||||
|
|
||||||
|
#endif // Sd2PinMap_h
|
||||||
|
|
||||||
|
#elif defined(__AVR__) // Other AVR based Boards follows
|
||||||
|
|
||||||
|
// Warning this file was generated by a program.
|
||||||
|
#ifndef Sd2PinMap_h
|
||||||
|
#define Sd2PinMap_h
|
||||||
|
#include <avr/io.h>
|
||||||
|
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** struct for mapping digital pins */
|
||||||
|
struct pin_map_t {
|
||||||
|
volatile uint8_t* ddr;
|
||||||
|
volatile uint8_t* pin;
|
||||||
|
volatile uint8_t* port;
|
||||||
|
uint8_t bit;
|
||||||
|
};
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||||
|
// Mega
|
||||||
|
|
||||||
|
// Two Wire (aka I2C) ports
|
||||||
|
uint8_t const SDA_PIN = 20;
|
||||||
|
uint8_t const SCL_PIN = 21;
|
||||||
|
|
||||||
|
// SPI port
|
||||||
|
uint8_t const SS_PIN = 53;
|
||||||
|
uint8_t const MOSI_PIN = 51;
|
||||||
|
uint8_t const MISO_PIN = 50;
|
||||||
|
uint8_t const SCK_PIN = 52;
|
||||||
|
|
||||||
|
static const pin_map_t digitalPinMap[] = {
|
||||||
|
{&DDRE, &PINE, &PORTE, 0}, // E0 0
|
||||||
|
{&DDRE, &PINE, &PORTE, 1}, // E1 1
|
||||||
|
{&DDRE, &PINE, &PORTE, 4}, // E4 2
|
||||||
|
{&DDRE, &PINE, &PORTE, 5}, // E5 3
|
||||||
|
{&DDRG, &PING, &PORTG, 5}, // G5 4
|
||||||
|
{&DDRE, &PINE, &PORTE, 3}, // E3 5
|
||||||
|
{&DDRH, &PINH, &PORTH, 3}, // H3 6
|
||||||
|
{&DDRH, &PINH, &PORTH, 4}, // H4 7
|
||||||
|
{&DDRH, &PINH, &PORTH, 5}, // H5 8
|
||||||
|
{&DDRH, &PINH, &PORTH, 6}, // H6 9
|
||||||
|
{&DDRB, &PINB, &PORTB, 4}, // B4 10
|
||||||
|
{&DDRB, &PINB, &PORTB, 5}, // B5 11
|
||||||
|
{&DDRB, &PINB, &PORTB, 6}, // B6 12
|
||||||
|
{&DDRB, &PINB, &PORTB, 7}, // B7 13
|
||||||
|
{&DDRJ, &PINJ, &PORTJ, 1}, // J1 14
|
||||||
|
{&DDRJ, &PINJ, &PORTJ, 0}, // J0 15
|
||||||
|
{&DDRH, &PINH, &PORTH, 1}, // H1 16
|
||||||
|
{&DDRH, &PINH, &PORTH, 0}, // H0 17
|
||||||
|
{&DDRD, &PIND, &PORTD, 3}, // D3 18
|
||||||
|
{&DDRD, &PIND, &PORTD, 2}, // D2 19
|
||||||
|
{&DDRD, &PIND, &PORTD, 1}, // D1 20
|
||||||
|
{&DDRD, &PIND, &PORTD, 0}, // D0 21
|
||||||
|
{&DDRA, &PINA, &PORTA, 0}, // A0 22
|
||||||
|
{&DDRA, &PINA, &PORTA, 1}, // A1 23
|
||||||
|
{&DDRA, &PINA, &PORTA, 2}, // A2 24
|
||||||
|
{&DDRA, &PINA, &PORTA, 3}, // A3 25
|
||||||
|
{&DDRA, &PINA, &PORTA, 4}, // A4 26
|
||||||
|
{&DDRA, &PINA, &PORTA, 5}, // A5 27
|
||||||
|
{&DDRA, &PINA, &PORTA, 6}, // A6 28
|
||||||
|
{&DDRA, &PINA, &PORTA, 7}, // A7 29
|
||||||
|
{&DDRC, &PINC, &PORTC, 7}, // C7 30
|
||||||
|
{&DDRC, &PINC, &PORTC, 6}, // C6 31
|
||||||
|
{&DDRC, &PINC, &PORTC, 5}, // C5 32
|
||||||
|
{&DDRC, &PINC, &PORTC, 4}, // C4 33
|
||||||
|
{&DDRC, &PINC, &PORTC, 3}, // C3 34
|
||||||
|
{&DDRC, &PINC, &PORTC, 2}, // C2 35
|
||||||
|
{&DDRC, &PINC, &PORTC, 1}, // C1 36
|
||||||
|
{&DDRC, &PINC, &PORTC, 0}, // C0 37
|
||||||
|
{&DDRD, &PIND, &PORTD, 7}, // D7 38
|
||||||
|
{&DDRG, &PING, &PORTG, 2}, // G2 39
|
||||||
|
{&DDRG, &PING, &PORTG, 1}, // G1 40
|
||||||
|
{&DDRG, &PING, &PORTG, 0}, // G0 41
|
||||||
|
{&DDRL, &PINL, &PORTL, 7}, // L7 42
|
||||||
|
{&DDRL, &PINL, &PORTL, 6}, // L6 43
|
||||||
|
{&DDRL, &PINL, &PORTL, 5}, // L5 44
|
||||||
|
{&DDRL, &PINL, &PORTL, 4}, // L4 45
|
||||||
|
{&DDRL, &PINL, &PORTL, 3}, // L3 46
|
||||||
|
{&DDRL, &PINL, &PORTL, 2}, // L2 47
|
||||||
|
{&DDRL, &PINL, &PORTL, 1}, // L1 48
|
||||||
|
{&DDRL, &PINL, &PORTL, 0}, // L0 49
|
||||||
|
{&DDRB, &PINB, &PORTB, 3}, // B3 50
|
||||||
|
{&DDRB, &PINB, &PORTB, 2}, // B2 51
|
||||||
|
{&DDRB, &PINB, &PORTB, 1}, // B1 52
|
||||||
|
{&DDRB, &PINB, &PORTB, 0}, // B0 53
|
||||||
|
{&DDRF, &PINF, &PORTF, 0}, // F0 54
|
||||||
|
{&DDRF, &PINF, &PORTF, 1}, // F1 55
|
||||||
|
{&DDRF, &PINF, &PORTF, 2}, // F2 56
|
||||||
|
{&DDRF, &PINF, &PORTF, 3}, // F3 57
|
||||||
|
{&DDRF, &PINF, &PORTF, 4}, // F4 58
|
||||||
|
{&DDRF, &PINF, &PORTF, 5}, // F5 59
|
||||||
|
{&DDRF, &PINF, &PORTF, 6}, // F6 60
|
||||||
|
{&DDRF, &PINF, &PORTF, 7}, // F7 61
|
||||||
|
{&DDRK, &PINK, &PORTK, 0}, // K0 62
|
||||||
|
{&DDRK, &PINK, &PORTK, 1}, // K1 63
|
||||||
|
{&DDRK, &PINK, &PORTK, 2}, // K2 64
|
||||||
|
{&DDRK, &PINK, &PORTK, 3}, // K3 65
|
||||||
|
{&DDRK, &PINK, &PORTK, 4}, // K4 66
|
||||||
|
{&DDRK, &PINK, &PORTK, 5}, // K5 67
|
||||||
|
{&DDRK, &PINK, &PORTK, 6}, // K6 68
|
||||||
|
{&DDRK, &PINK, &PORTK, 7} // K7 69
|
||||||
|
};
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
#elif (defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284P__)) && defined(CORE_MICRODUINO)
|
||||||
|
// Microduino Core+
|
||||||
|
|
||||||
|
// Two Wire (aka I2C) ports
|
||||||
|
uint8_t const SDA_PIN = 20;
|
||||||
|
uint8_t const SCL_PIN = 21;
|
||||||
|
|
||||||
|
// SPI port
|
||||||
|
uint8_t const SS_PIN = 10;
|
||||||
|
uint8_t const MOSI_PIN = 11;
|
||||||
|
uint8_t const MISO_PIN = 12;
|
||||||
|
uint8_t const SCK_PIN = 13;
|
||||||
|
|
||||||
|
static const pin_map_t digitalPinMap[] = {
|
||||||
|
{&DDRD, &PIND, &PORTD, 0}, // D0 PD0
|
||||||
|
{&DDRD, &PIND, &PORTD, 1}, // D1 PD1
|
||||||
|
{&DDRD, &PIND, &PORTD, 2}, // D2 PD2
|
||||||
|
{&DDRD, &PIND, &PORTD, 3}, // D3 PD3
|
||||||
|
{&DDRB, &PINB, &PORTB, 0}, // D4 PB0
|
||||||
|
{&DDRB, &PINB, &PORTB, 1}, // D5 PB1
|
||||||
|
{&DDRB, &PINB, &PORTB, 2}, // D6 PB2
|
||||||
|
{&DDRB, &PINB, &PORTB, 3}, // D7 PB3
|
||||||
|
{&DDRD, &PIND, &PORTD, 6}, // D8 PD6
|
||||||
|
{&DDRD, &PIND, &PORTD, 5}, // D9 PD5
|
||||||
|
{&DDRB, &PINB, &PORTB, 4}, // D10 PB4
|
||||||
|
{&DDRB, &PINB, &PORTB, 5}, // D11 PB5
|
||||||
|
{&DDRB, &PINB, &PORTB, 6}, // D12 PB6
|
||||||
|
{&DDRB, &PINB, &PORTB, 7}, // D13 PB7
|
||||||
|
{&DDRC, &PINC, &PORTC, 7}, // D14 PC7
|
||||||
|
{&DDRC, &PINC, &PORTC, 6}, // D15 PC6
|
||||||
|
{&DDRC, &PINC, &PORTC, 5}, // D16 PC5
|
||||||
|
{&DDRC, &PINC, &PORTC, 4}, // D17 PC4
|
||||||
|
{&DDRC, &PINC, &PORTC, 3}, // D18 PC3
|
||||||
|
{&DDRC, &PINC, &PORTC, 2}, // D19 PC2
|
||||||
|
{&DDRC, &PINC, &PORTC, 1}, // D20 PC1
|
||||||
|
{&DDRC, &PINC, &PORTC, 0}, // D21 PC0
|
||||||
|
{&DDRD, &PIND, &PORTD, 4}, // D22 PD4
|
||||||
|
{&DDRD, &PIND, &PORTD, 7}, // D23 PD7
|
||||||
|
{&DDRA, &PINA, &PORTA, 7}, // D24 PA7
|
||||||
|
{&DDRA, &PINA, &PORTA, 6}, // D25 PA6
|
||||||
|
{&DDRA, &PINA, &PORTA, 5}, // D26 PA5
|
||||||
|
{&DDRA, &PINA, &PORTA, 4}, // D27 PA4
|
||||||
|
{&DDRA, &PINA, &PORTA, 3}, // D28 PA3
|
||||||
|
{&DDRA, &PINA, &PORTA, 2}, // D29 PA2
|
||||||
|
{&DDRA, &PINA, &PORTA, 1}, // D30 PA1
|
||||||
|
{&DDRA, &PINA, &PORTA, 0} // D31 PA0
|
||||||
|
};
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
#elif defined(__AVR_ATmega128RFA1__) && defined(CORE_MICRODUINO)
|
||||||
|
// Microduino Core RF
|
||||||
|
|
||||||
|
// Two Wire (aka I2C) ports
|
||||||
|
uint8_t const SDA_PIN = 18;
|
||||||
|
uint8_t const SCL_PIN = 19;
|
||||||
|
|
||||||
|
// SPI port
|
||||||
|
uint8_t const SS_PIN = 10;
|
||||||
|
uint8_t const MOSI_PIN = 11;
|
||||||
|
uint8_t const MISO_PIN = 12;
|
||||||
|
uint8_t const SCK_PIN = 13;
|
||||||
|
|
||||||
|
static const pin_map_t digitalPinMap[] = {
|
||||||
|
{&DDRD, &PINE, &PORTE, 0}, // D0 PE0
|
||||||
|
{&DDRD, &PINE, &PORTE, 1}, // D1 PE1
|
||||||
|
{&DDRD, &PIND, &PORTD, 2}, // D2 PD2
|
||||||
|
{&DDRD, &PIND, &PORTD, 3}, // D3 PD3
|
||||||
|
{&DDRB, &PINE, &PORTE, 3}, // D4 PE3
|
||||||
|
{&DDRB, &PINE, &PORTE, 4}, // D5 PE4
|
||||||
|
{&DDRB, &PINE, &PORTE, 5}, // D6 PE5
|
||||||
|
{&DDRB, &PINB, &PORTB, 7}, // D7 PB7
|
||||||
|
{&DDRD, &PINB, &PORTB, 6}, // D8 PB6
|
||||||
|
{&DDRD, &PINB, &PORTB, 5}, // D9 PB5
|
||||||
|
{&DDRB, &PINB, &PORTB, 4}, // D10 PB4
|
||||||
|
{&DDRB, &PINB, &PORTB, 2}, // D11 PB2
|
||||||
|
{&DDRB, &PINB, &PORTB, 3}, // D12 PB3
|
||||||
|
{&DDRB, &PINB, &PORTB, 1}, // D13 PB1
|
||||||
|
{&DDRF, &PINF, &PORTF, 7}, // D14 PF7
|
||||||
|
{&DDRF, &PINF, &PORTF, 6}, // D15 PF6
|
||||||
|
{&DDRF, &PINF, &PORTF, 5}, // D16 PF5
|
||||||
|
{&DDRF, &PINF, &PORTF, 4}, // D17 PF4
|
||||||
|
{&DDRD, &PIND, &PORTD, 1}, // D18 PD1
|
||||||
|
{&DDRD, &PIND, &PORTD, 0}, // D19 PD0
|
||||||
|
{&DDRF, &PINF, &PORTF, 3}, // D20 PF3
|
||||||
|
{&DDRF, &PINF, &PORTF, 2}, // D21 PF2
|
||||||
|
};
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
#elif defined(__AVR_ATmega32U4__) && defined(CORE_MICRODUINO)
|
||||||
|
// Microduino Core USB
|
||||||
|
|
||||||
|
// Two Wire (aka I2C) ports
|
||||||
|
uint8_t const SDA_PIN = 18;
|
||||||
|
uint8_t const SCL_PIN = 19;
|
||||||
|
|
||||||
|
// SPI port
|
||||||
|
uint8_t const SS_PIN = 10;
|
||||||
|
uint8_t const MOSI_PIN = 11;
|
||||||
|
uint8_t const MISO_PIN = 12;
|
||||||
|
uint8_t const SCK_PIN = 13;
|
||||||
|
|
||||||
|
static const pin_map_t digitalPinMap[] = {
|
||||||
|
{&DDRD, &PIND, &PORTD, 2}, // D0 - PD2
|
||||||
|
{&DDRD, &PIND, &PORTD, 3}, // D1 - PD3
|
||||||
|
{&DDRE, &PINE, &PORTE, 6}, // D2 - PE6
|
||||||
|
{&DDRD, &PIND, &PORTD, 6}, // D3 - PD6
|
||||||
|
{&DDRD, &PIND, &PORTD, 7}, // D4 - PD7
|
||||||
|
{&DDRC, &PINC, &PORTC, 6}, // D5 - PC6
|
||||||
|
{&DDRC, &PINC, &PORTC, 7}, // D6 - PC7
|
||||||
|
{&DDRE, &PINE, &PORTE, 7}, // D7 - PE7
|
||||||
|
{&DDRB, &PINB, &PORTB, 6}, // D8 - PB6
|
||||||
|
{&DDRB, &PINB, &PORTB, 5}, // D9 - PB5
|
||||||
|
{&DDRB, &PINB, &PORTB, 0}, // D10 - PB0
|
||||||
|
{&DDRB, &PINB, &PORTB, 2}, // D11 - MOSI - PB2
|
||||||
|
{&DDRB, &PINB, &PORTB, 3}, // D12 -MISO - PB3
|
||||||
|
{&DDRB, &PINB, &PORTB, 1}, // D13 -SCK - PB1
|
||||||
|
{&DDRF, &PINF, &PORTF, 7}, // D14 - A0 - PF7
|
||||||
|
{&DDRF, &PINF, &PORTF, 6}, // D15 - A1 - PF6
|
||||||
|
{&DDRF, &PINF, &PORTF, 5}, // D16 - A2 - PF5
|
||||||
|
{&DDRF, &PINF, &PORTF, 4}, // D17 - A3 - PF4
|
||||||
|
{&DDRD, &PIND, &PORTD, 1}, // D18 - PD1
|
||||||
|
{&DDRD, &PIND, &PORTD, 0}, // D19 - PD0
|
||||||
|
{&DDRF, &PINF, &PORTF, 1}, // D20 - A6 - PF1
|
||||||
|
{&DDRF, &PINF, &PORTF, 0}, // D21 - A7 - PF0
|
||||||
|
};
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
#elif defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644__)
|
||||||
|
// Sanguino
|
||||||
|
|
||||||
|
// Two Wire (aka I2C) ports
|
||||||
|
uint8_t const SDA_PIN = 17;
|
||||||
|
uint8_t const SCL_PIN = 18;
|
||||||
|
|
||||||
|
// SPI port
|
||||||
|
uint8_t const SS_PIN = 4;
|
||||||
|
uint8_t const MOSI_PIN = 5;
|
||||||
|
uint8_t const MISO_PIN = 6;
|
||||||
|
uint8_t const SCK_PIN = 7;
|
||||||
|
|
||||||
|
static const pin_map_t digitalPinMap[] = {
|
||||||
|
{&DDRB, &PINB, &PORTB, 0}, // B0 0
|
||||||
|
{&DDRB, &PINB, &PORTB, 1}, // B1 1
|
||||||
|
{&DDRB, &PINB, &PORTB, 2}, // B2 2
|
||||||
|
{&DDRB, &PINB, &PORTB, 3}, // B3 3
|
||||||
|
{&DDRB, &PINB, &PORTB, 4}, // B4 4
|
||||||
|
{&DDRB, &PINB, &PORTB, 5}, // B5 5
|
||||||
|
{&DDRB, &PINB, &PORTB, 6}, // B6 6
|
||||||
|
{&DDRB, &PINB, &PORTB, 7}, // B7 7
|
||||||
|
{&DDRD, &PIND, &PORTD, 0}, // D0 8
|
||||||
|
{&DDRD, &PIND, &PORTD, 1}, // D1 9
|
||||||
|
{&DDRD, &PIND, &PORTD, 2}, // D2 10
|
||||||
|
{&DDRD, &PIND, &PORTD, 3}, // D3 11
|
||||||
|
{&DDRD, &PIND, &PORTD, 4}, // D4 12
|
||||||
|
{&DDRD, &PIND, &PORTD, 5}, // D5 13
|
||||||
|
{&DDRD, &PIND, &PORTD, 6}, // D6 14
|
||||||
|
{&DDRD, &PIND, &PORTD, 7}, // D7 15
|
||||||
|
{&DDRC, &PINC, &PORTC, 0}, // C0 16
|
||||||
|
{&DDRC, &PINC, &PORTC, 1}, // C1 17
|
||||||
|
{&DDRC, &PINC, &PORTC, 2}, // C2 18
|
||||||
|
{&DDRC, &PINC, &PORTC, 3}, // C3 19
|
||||||
|
{&DDRC, &PINC, &PORTC, 4}, // C4 20
|
||||||
|
{&DDRC, &PINC, &PORTC, 5}, // C5 21
|
||||||
|
{&DDRC, &PINC, &PORTC, 6}, // C6 22
|
||||||
|
{&DDRC, &PINC, &PORTC, 7}, // C7 23
|
||||||
|
{&DDRA, &PINA, &PORTA, 7}, // A7 24
|
||||||
|
{&DDRA, &PINA, &PORTA, 6}, // A6 25
|
||||||
|
{&DDRA, &PINA, &PORTA, 5}, // A5 26
|
||||||
|
{&DDRA, &PINA, &PORTA, 4}, // A4 27
|
||||||
|
{&DDRA, &PINA, &PORTA, 3}, // A3 28
|
||||||
|
{&DDRA, &PINA, &PORTA, 2}, // A2 29
|
||||||
|
{&DDRA, &PINA, &PORTA, 1}, // A1 30
|
||||||
|
{&DDRA, &PINA, &PORTA, 0} // A0 31
|
||||||
|
};
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
#elif defined(__AVR_ATmega32U4__)
|
||||||
|
// Leonardo
|
||||||
|
|
||||||
|
// Two Wire (aka I2C) ports
|
||||||
|
uint8_t const SDA_PIN = 2;
|
||||||
|
uint8_t const SCL_PIN = 3;
|
||||||
|
|
||||||
|
// SPI port
|
||||||
|
uint8_t const SS_PIN = 17;
|
||||||
|
uint8_t const MOSI_PIN = 16;
|
||||||
|
uint8_t const MISO_PIN = 14;
|
||||||
|
uint8_t const SCK_PIN = 15;
|
||||||
|
|
||||||
|
static const pin_map_t digitalPinMap[] = {
|
||||||
|
{&DDRD, &PIND, &PORTD, 2}, // D2 0
|
||||||
|
{&DDRD, &PIND, &PORTD, 3}, // D3 1
|
||||||
|
{&DDRD, &PIND, &PORTD, 1}, // D1 2
|
||||||
|
{&DDRD, &PIND, &PORTD, 0}, // D0 3
|
||||||
|
{&DDRD, &PIND, &PORTD, 4}, // D4 4
|
||||||
|
{&DDRC, &PINC, &PORTC, 6}, // C6 5
|
||||||
|
{&DDRD, &PIND, &PORTD, 7}, // D7 6
|
||||||
|
{&DDRE, &PINE, &PORTE, 6}, // E6 7
|
||||||
|
{&DDRB, &PINB, &PORTB, 4}, // B4 8
|
||||||
|
{&DDRB, &PINB, &PORTB, 5}, // B5 9
|
||||||
|
{&DDRB, &PINB, &PORTB, 6}, // B6 10
|
||||||
|
{&DDRB, &PINB, &PORTB, 7}, // B7 11
|
||||||
|
{&DDRD, &PIND, &PORTD, 6}, // D6 12
|
||||||
|
{&DDRC, &PINC, &PORTC, 7}, // C7 13
|
||||||
|
{&DDRB, &PINB, &PORTB, 3}, // B3 14
|
||||||
|
{&DDRB, &PINB, &PORTB, 1}, // B1 15
|
||||||
|
{&DDRB, &PINB, &PORTB, 2}, // B2 16
|
||||||
|
{&DDRB, &PINB, &PORTB, 0}, // B0 17
|
||||||
|
{&DDRF, &PINF, &PORTF, 7}, // F7 18
|
||||||
|
{&DDRF, &PINF, &PORTF, 6}, // F6 19
|
||||||
|
{&DDRF, &PINF, &PORTF, 5}, // F5 20
|
||||||
|
{&DDRF, &PINF, &PORTF, 4}, // F4 21
|
||||||
|
{&DDRF, &PINF, &PORTF, 1}, // F1 22
|
||||||
|
{&DDRF, &PINF, &PORTF, 0}, // F0 23
|
||||||
|
};
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
|
||||||
|
// Teensy++ 1.0 & 2.0
|
||||||
|
|
||||||
|
// Two Wire (aka I2C) ports
|
||||||
|
uint8_t const SDA_PIN = 1;
|
||||||
|
uint8_t const SCL_PIN = 0;
|
||||||
|
|
||||||
|
// SPI port
|
||||||
|
uint8_t const SS_PIN = 20;
|
||||||
|
uint8_t const MOSI_PIN = 22;
|
||||||
|
uint8_t const MISO_PIN = 23;
|
||||||
|
uint8_t const SCK_PIN = 21;
|
||||||
|
|
||||||
|
static const pin_map_t digitalPinMap[] = {
|
||||||
|
{&DDRD, &PIND, &PORTD, 0}, // D0 0
|
||||||
|
{&DDRD, &PIND, &PORTD, 1}, // D1 1
|
||||||
|
{&DDRD, &PIND, &PORTD, 2}, // D2 2
|
||||||
|
{&DDRD, &PIND, &PORTD, 3}, // D3 3
|
||||||
|
{&DDRD, &PIND, &PORTD, 4}, // D4 4
|
||||||
|
{&DDRD, &PIND, &PORTD, 5}, // D5 5
|
||||||
|
{&DDRD, &PIND, &PORTD, 6}, // D6 6
|
||||||
|
{&DDRD, &PIND, &PORTD, 7}, // D7 7
|
||||||
|
{&DDRE, &PINE, &PORTE, 0}, // E0 8
|
||||||
|
{&DDRE, &PINE, &PORTE, 1}, // E1 9
|
||||||
|
{&DDRC, &PINC, &PORTC, 0}, // C0 10
|
||||||
|
{&DDRC, &PINC, &PORTC, 1}, // C1 11
|
||||||
|
{&DDRC, &PINC, &PORTC, 2}, // C2 12
|
||||||
|
{&DDRC, &PINC, &PORTC, 3}, // C3 13
|
||||||
|
{&DDRC, &PINC, &PORTC, 4}, // C4 14
|
||||||
|
{&DDRC, &PINC, &PORTC, 5}, // C5 15
|
||||||
|
{&DDRC, &PINC, &PORTC, 6}, // C6 16
|
||||||
|
{&DDRC, &PINC, &PORTC, 7}, // C7 17
|
||||||
|
{&DDRE, &PINE, &PORTE, 6}, // E6 18
|
||||||
|
{&DDRE, &PINE, &PORTE, 7}, // E7 19
|
||||||
|
{&DDRB, &PINB, &PORTB, 0}, // B0 20
|
||||||
|
{&DDRB, &PINB, &PORTB, 1}, // B1 21
|
||||||
|
{&DDRB, &PINB, &PORTB, 2}, // B2 22
|
||||||
|
{&DDRB, &PINB, &PORTB, 3}, // B3 23
|
||||||
|
{&DDRB, &PINB, &PORTB, 4}, // B4 24
|
||||||
|
{&DDRB, &PINB, &PORTB, 5}, // B5 25
|
||||||
|
{&DDRB, &PINB, &PORTB, 6}, // B6 26
|
||||||
|
{&DDRB, &PINB, &PORTB, 7}, // B7 27
|
||||||
|
{&DDRA, &PINA, &PORTA, 0}, // A0 28
|
||||||
|
{&DDRA, &PINA, &PORTA, 1}, // A1 29
|
||||||
|
{&DDRA, &PINA, &PORTA, 2}, // A2 30
|
||||||
|
{&DDRA, &PINA, &PORTA, 3}, // A3 31
|
||||||
|
{&DDRA, &PINA, &PORTA, 4}, // A4 32
|
||||||
|
{&DDRA, &PINA, &PORTA, 5}, // A5 33
|
||||||
|
{&DDRA, &PINA, &PORTA, 6}, // A6 34
|
||||||
|
{&DDRA, &PINA, &PORTA, 7}, // A7 35
|
||||||
|
{&DDRE, &PINE, &PORTE, 4}, // E4 36
|
||||||
|
{&DDRE, &PINE, &PORTE, 5}, // E5 37
|
||||||
|
{&DDRF, &PINF, &PORTF, 0}, // F0 38
|
||||||
|
{&DDRF, &PINF, &PORTF, 1}, // F1 39
|
||||||
|
{&DDRF, &PINF, &PORTF, 2}, // F2 40
|
||||||
|
{&DDRF, &PINF, &PORTF, 3}, // F3 41
|
||||||
|
{&DDRF, &PINF, &PORTF, 4}, // F4 42
|
||||||
|
{&DDRF, &PINF, &PORTF, 5}, // F5 43
|
||||||
|
{&DDRF, &PINF, &PORTF, 6}, // F6 44
|
||||||
|
{&DDRF, &PINF, &PORTF, 7} // F7 45
|
||||||
|
};
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
#else // defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||||
|
// 168 and 328 Arduinos
|
||||||
|
|
||||||
|
// Two Wire (aka I2C) ports
|
||||||
|
uint8_t const SDA_PIN = 18;
|
||||||
|
uint8_t const SCL_PIN = 19;
|
||||||
|
|
||||||
|
// SPI port
|
||||||
|
uint8_t const SS_PIN = 10;
|
||||||
|
uint8_t const MOSI_PIN = 11;
|
||||||
|
uint8_t const MISO_PIN = 12;
|
||||||
|
uint8_t const SCK_PIN = 13;
|
||||||
|
|
||||||
|
static const pin_map_t digitalPinMap[] = {
|
||||||
|
{&DDRD, &PIND, &PORTD, 0}, // D0 0
|
||||||
|
{&DDRD, &PIND, &PORTD, 1}, // D1 1
|
||||||
|
{&DDRD, &PIND, &PORTD, 2}, // D2 2
|
||||||
|
{&DDRD, &PIND, &PORTD, 3}, // D3 3
|
||||||
|
{&DDRD, &PIND, &PORTD, 4}, // D4 4
|
||||||
|
{&DDRD, &PIND, &PORTD, 5}, // D5 5
|
||||||
|
{&DDRD, &PIND, &PORTD, 6}, // D6 6
|
||||||
|
{&DDRD, &PIND, &PORTD, 7}, // D7 7
|
||||||
|
{&DDRB, &PINB, &PORTB, 0}, // B0 8
|
||||||
|
{&DDRB, &PINB, &PORTB, 1}, // B1 9
|
||||||
|
{&DDRB, &PINB, &PORTB, 2}, // B2 10
|
||||||
|
{&DDRB, &PINB, &PORTB, 3}, // B3 11
|
||||||
|
{&DDRB, &PINB, &PORTB, 4}, // B4 12
|
||||||
|
{&DDRB, &PINB, &PORTB, 5}, // B5 13
|
||||||
|
{&DDRC, &PINC, &PORTC, 0}, // C0 14
|
||||||
|
{&DDRC, &PINC, &PORTC, 1}, // C1 15
|
||||||
|
{&DDRC, &PINC, &PORTC, 2}, // C2 16
|
||||||
|
{&DDRC, &PINC, &PORTC, 3}, // C3 17
|
||||||
|
{&DDRC, &PINC, &PORTC, 4}, // C4 18
|
||||||
|
{&DDRC, &PINC, &PORTC, 5} // C5 19
|
||||||
|
};
|
||||||
|
#endif // defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
static const uint8_t digitalPinCount = sizeof(digitalPinMap) / sizeof(pin_map_t);
|
||||||
|
|
||||||
|
uint8_t badPinNumber(void)
|
||||||
|
__attribute__((error("Pin number is too large or not a constant")));
|
||||||
|
|
||||||
|
static inline __attribute__((always_inline))
|
||||||
|
uint8_t getPinMode(uint8_t pin) {
|
||||||
|
if (__builtin_constant_p(pin) && pin < digitalPinCount) {
|
||||||
|
return (*digitalPinMap[pin].ddr >> digitalPinMap[pin].bit) & 1;
|
||||||
|
} else {
|
||||||
|
return badPinNumber();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
static inline __attribute__((always_inline))
|
||||||
|
void setPinMode(uint8_t pin, uint8_t mode) {
|
||||||
|
if (__builtin_constant_p(pin) && pin < digitalPinCount) {
|
||||||
|
if (mode) {
|
||||||
|
*digitalPinMap[pin].ddr |= 1 << digitalPinMap[pin].bit;
|
||||||
|
} else {
|
||||||
|
*digitalPinMap[pin].ddr &= ~(1 << digitalPinMap[pin].bit);
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
badPinNumber();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
static inline __attribute__((always_inline))
|
||||||
|
uint8_t fastDigitalRead(uint8_t pin) {
|
||||||
|
if (__builtin_constant_p(pin) && pin < digitalPinCount) {
|
||||||
|
return (*digitalPinMap[pin].pin >> digitalPinMap[pin].bit) & 1;
|
||||||
|
} else {
|
||||||
|
return badPinNumber();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
static inline __attribute__((always_inline))
|
||||||
|
void fastDigitalWrite(uint8_t pin, uint8_t value) {
|
||||||
|
if (__builtin_constant_p(pin) && pin < digitalPinCount) {
|
||||||
|
if (value) {
|
||||||
|
*digitalPinMap[pin].port |= 1 << digitalPinMap[pin].bit;
|
||||||
|
} else {
|
||||||
|
*digitalPinMap[pin].port &= ~(1 << digitalPinMap[pin].bit);
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
badPinNumber();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif // Sd2PinMap_h
|
||||||
|
|
||||||
|
#elif defined (__CPU_ARC__)
|
||||||
|
|
||||||
|
#if defined (__ARDUINO_ARC__)
|
||||||
|
// Two Wire (aka I2C) ports
|
||||||
|
uint8_t const SDA_PIN = 18;
|
||||||
|
uint8_t const SCL_PIN = 19;
|
||||||
|
|
||||||
|
// SPI port
|
||||||
|
uint8_t const SS_PIN = 10;
|
||||||
|
uint8_t const MOSI_PIN = 11;
|
||||||
|
uint8_t const MISO_PIN = 12;
|
||||||
|
uint8_t const SCK_PIN = 13;
|
||||||
|
|
||||||
|
#endif // Arduino ARC
|
||||||
|
|
||||||
|
#else
|
||||||
|
#error Architecture or board not supported.
|
||||||
|
#endif
|
||||||
641
libraries/SD/src/utility/SdFat.h
Executable file
641
libraries/SD/src/utility/SdFat.h
Executable file
|
|
@ -0,0 +1,641 @@
|
||||||
|
/* Arduino SdFat Library
|
||||||
|
Copyright (C) 2009 by William Greiman
|
||||||
|
|
||||||
|
This file is part of the Arduino SdFat Library
|
||||||
|
|
||||||
|
This Library is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 3 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This Library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with the Arduino SdFat Library. If not, see
|
||||||
|
<http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#ifndef SdFat_h
|
||||||
|
#define SdFat_h
|
||||||
|
/**
|
||||||
|
\file
|
||||||
|
SdFile and SdVolume classes
|
||||||
|
*/
|
||||||
|
#if defined (__AVR__) || defined (__CPU_ARC__)
|
||||||
|
#include <avr/pgmspace.h>
|
||||||
|
#endif
|
||||||
|
#include "Sd2Card.h"
|
||||||
|
#include "FatStructs.h"
|
||||||
|
#include <Print.h>
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
Allow use of deprecated functions if non-zero
|
||||||
|
*/
|
||||||
|
#define ALLOW_DEPRECATED_FUNCTIONS 1
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// forward declaration since SdVolume is used in SdFile
|
||||||
|
class SdVolume;
|
||||||
|
//==============================================================================
|
||||||
|
// SdFile class
|
||||||
|
|
||||||
|
#ifdef O_RDONLY //ARDUINO_ARCH_MBED
|
||||||
|
#undef O_READ
|
||||||
|
#undef O_RDONLY
|
||||||
|
#undef O_WRITE
|
||||||
|
#undef O_WRONLY
|
||||||
|
#undef O_RDWR
|
||||||
|
#undef O_ACCMODE
|
||||||
|
#undef O_APPEND
|
||||||
|
#undef O_SYNC
|
||||||
|
#undef O_CREAT
|
||||||
|
#undef O_EXCL
|
||||||
|
#undef O_TRUNC
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// flags for ls()
|
||||||
|
/** ls() flag to print modify date */
|
||||||
|
uint8_t const LS_DATE = 1;
|
||||||
|
/** ls() flag to print file size */
|
||||||
|
uint8_t const LS_SIZE = 2;
|
||||||
|
/** ls() flag for recursive list of subdirectories */
|
||||||
|
uint8_t const LS_R = 4;
|
||||||
|
|
||||||
|
// use the gnu style oflag in open()
|
||||||
|
/** open() oflag for reading */
|
||||||
|
uint8_t const O_READ = 0X01;
|
||||||
|
/** open() oflag - same as O_READ */
|
||||||
|
uint8_t const O_RDONLY = O_READ;
|
||||||
|
/** open() oflag for write */
|
||||||
|
uint8_t const O_WRITE = 0X02;
|
||||||
|
/** open() oflag - same as O_WRITE */
|
||||||
|
uint8_t const O_WRONLY = O_WRITE;
|
||||||
|
/** open() oflag for reading and writing */
|
||||||
|
uint8_t const O_RDWR = (O_READ | O_WRITE);
|
||||||
|
/** open() oflag mask for access modes */
|
||||||
|
uint8_t const O_ACCMODE = (O_READ | O_WRITE);
|
||||||
|
/** The file offset shall be set to the end of the file prior to each write. */
|
||||||
|
uint8_t const O_APPEND = 0X04;
|
||||||
|
/** synchronous writes - call sync() after each write */
|
||||||
|
uint8_t const O_SYNC = 0X08;
|
||||||
|
/** create the file if nonexistent */
|
||||||
|
uint8_t const O_CREAT = 0X10;
|
||||||
|
/** If O_CREAT and O_EXCL are set, open() shall fail if the file exists */
|
||||||
|
uint8_t const O_EXCL = 0X20;
|
||||||
|
/** truncate the file to zero length */
|
||||||
|
uint8_t const O_TRUNC = 0X40;
|
||||||
|
|
||||||
|
// flags for timestamp
|
||||||
|
/** set the file's last access date */
|
||||||
|
uint8_t const T_ACCESS = 1;
|
||||||
|
/** set the file's creation date and time */
|
||||||
|
uint8_t const T_CREATE = 2;
|
||||||
|
/** Set the file's write date and time */
|
||||||
|
uint8_t const T_WRITE = 4;
|
||||||
|
// values for type_
|
||||||
|
/** This SdFile has not been opened. */
|
||||||
|
uint8_t const FAT_FILE_TYPE_CLOSED = 0;
|
||||||
|
/** SdFile for a file */
|
||||||
|
uint8_t const FAT_FILE_TYPE_NORMAL = 1;
|
||||||
|
/** SdFile for a FAT16 root directory */
|
||||||
|
uint8_t const FAT_FILE_TYPE_ROOT16 = 2;
|
||||||
|
/** SdFile for a FAT32 root directory */
|
||||||
|
uint8_t const FAT_FILE_TYPE_ROOT32 = 3;
|
||||||
|
/** SdFile for a subdirectory */
|
||||||
|
uint8_t const FAT_FILE_TYPE_SUBDIR = 4;
|
||||||
|
/** Test value for directory type */
|
||||||
|
uint8_t const FAT_FILE_TYPE_MIN_DIR = FAT_FILE_TYPE_ROOT16;
|
||||||
|
|
||||||
|
/** date field for FAT directory entry */
|
||||||
|
static inline uint16_t FAT_DATE(uint16_t year, uint8_t month, uint8_t day) {
|
||||||
|
return (year - 1980) << 9 | month << 5 | day;
|
||||||
|
}
|
||||||
|
/** year part of FAT directory date field */
|
||||||
|
static inline uint16_t FAT_YEAR(uint16_t fatDate) {
|
||||||
|
return 1980 + (fatDate >> 9);
|
||||||
|
}
|
||||||
|
/** month part of FAT directory date field */
|
||||||
|
static inline uint8_t FAT_MONTH(uint16_t fatDate) {
|
||||||
|
return (fatDate >> 5) & 0XF;
|
||||||
|
}
|
||||||
|
/** day part of FAT directory date field */
|
||||||
|
static inline uint8_t FAT_DAY(uint16_t fatDate) {
|
||||||
|
return fatDate & 0X1F;
|
||||||
|
}
|
||||||
|
/** time field for FAT directory entry */
|
||||||
|
static inline uint16_t FAT_TIME(uint8_t hour, uint8_t minute, uint8_t second) {
|
||||||
|
return hour << 11 | minute << 5 | second >> 1;
|
||||||
|
}
|
||||||
|
/** hour part of FAT directory time field */
|
||||||
|
static inline uint8_t FAT_HOUR(uint16_t fatTime) {
|
||||||
|
return fatTime >> 11;
|
||||||
|
}
|
||||||
|
/** minute part of FAT directory time field */
|
||||||
|
static inline uint8_t FAT_MINUTE(uint16_t fatTime) {
|
||||||
|
return (fatTime >> 5) & 0X3F;
|
||||||
|
}
|
||||||
|
/** second part of FAT directory time field */
|
||||||
|
static inline uint8_t FAT_SECOND(uint16_t fatTime) {
|
||||||
|
return 2 * (fatTime & 0X1F);
|
||||||
|
}
|
||||||
|
/** Default date for file timestamps is 1 Jan 2000 */
|
||||||
|
uint16_t const FAT_DEFAULT_DATE = ((2000 - 1980) << 9) | (1 << 5) | 1;
|
||||||
|
/** Default time for file timestamp is 1 am */
|
||||||
|
uint16_t const FAT_DEFAULT_TIME = (1 << 11);
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
\class SdFile
|
||||||
|
\brief Access FAT16 and FAT32 files on SD and SDHC cards.
|
||||||
|
*/
|
||||||
|
class SdFile : public Print {
|
||||||
|
public:
|
||||||
|
/** Create an instance of SdFile. */
|
||||||
|
SdFile(void) : type_(FAT_FILE_TYPE_CLOSED) {}
|
||||||
|
/**
|
||||||
|
writeError is set to true if an error occurs during a write().
|
||||||
|
Set writeError to false before calling print() and/or write() and check
|
||||||
|
for true after calls to print() and/or write().
|
||||||
|
*/
|
||||||
|
//bool writeError;
|
||||||
|
/**
|
||||||
|
Cancel unbuffered reads for this file.
|
||||||
|
See setUnbufferedRead()
|
||||||
|
*/
|
||||||
|
void clearUnbufferedRead(void) {
|
||||||
|
flags_ &= ~F_FILE_UNBUFFERED_READ;
|
||||||
|
}
|
||||||
|
uint8_t close(void);
|
||||||
|
uint8_t contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock);
|
||||||
|
uint8_t createContiguous(SdFile* dirFile,
|
||||||
|
const char* fileName, uint32_t size);
|
||||||
|
/** \return The current cluster number for a file or directory. */
|
||||||
|
uint32_t curCluster(void) const {
|
||||||
|
return curCluster_;
|
||||||
|
}
|
||||||
|
/** \return The current position for a file or directory. */
|
||||||
|
uint32_t curPosition(void) const {
|
||||||
|
return curPosition_;
|
||||||
|
}
|
||||||
|
/**
|
||||||
|
Set the date/time callback function
|
||||||
|
|
||||||
|
\param[in] dateTime The user's call back function. The callback
|
||||||
|
function is of the form:
|
||||||
|
|
||||||
|
\code
|
||||||
|
void dateTime(uint16_t* date, uint16_t* time) {
|
||||||
|
uint16_t year;
|
||||||
|
uint8_t month, day, hour, minute, second;
|
||||||
|
|
||||||
|
// User gets date and time from GPS or real-time clock here
|
||||||
|
|
||||||
|
// return date using FAT_DATE macro to format fields
|
||||||
|
* *date = FAT_DATE(year, month, day);
|
||||||
|
|
||||||
|
// return time using FAT_TIME macro to format fields
|
||||||
|
* *time = FAT_TIME(hour, minute, second);
|
||||||
|
}
|
||||||
|
\endcode
|
||||||
|
|
||||||
|
Sets the function that is called when a file is created or when
|
||||||
|
a file's directory entry is modified by sync(). All timestamps,
|
||||||
|
access, creation, and modify, are set when a file is created.
|
||||||
|
sync() maintains the last access date and last modify date/time.
|
||||||
|
|
||||||
|
See the timestamp() function.
|
||||||
|
*/
|
||||||
|
static void dateTimeCallback(
|
||||||
|
void (*dateTime)(uint16_t* date, uint16_t* time)) {
|
||||||
|
dateTime_ = dateTime;
|
||||||
|
}
|
||||||
|
/**
|
||||||
|
Cancel the date/time callback function.
|
||||||
|
*/
|
||||||
|
static void dateTimeCallbackCancel(void) {
|
||||||
|
// use explicit zero since NULL is not defined for Sanguino
|
||||||
|
dateTime_ = 0;
|
||||||
|
}
|
||||||
|
/** \return Address of the block that contains this file's directory. */
|
||||||
|
uint32_t dirBlock(void) const {
|
||||||
|
return dirBlock_;
|
||||||
|
}
|
||||||
|
uint8_t dirEntry(dir_t* dir);
|
||||||
|
/** \return Index of this file's directory in the block dirBlock. */
|
||||||
|
uint8_t dirIndex(void) const {
|
||||||
|
return dirIndex_;
|
||||||
|
}
|
||||||
|
static void dirName(const dir_t& dir, char* name);
|
||||||
|
/** \return The total number of bytes in a file or directory. */
|
||||||
|
uint32_t fileSize(void) const {
|
||||||
|
return fileSize_;
|
||||||
|
}
|
||||||
|
/** \return The first cluster number for a file or directory. */
|
||||||
|
uint32_t firstCluster(void) const {
|
||||||
|
return firstCluster_;
|
||||||
|
}
|
||||||
|
/** \return True if this is a SdFile for a directory else false. */
|
||||||
|
uint8_t isDir(void) const {
|
||||||
|
return type_ >= FAT_FILE_TYPE_MIN_DIR;
|
||||||
|
}
|
||||||
|
/** \return True if this is a SdFile for a file else false. */
|
||||||
|
uint8_t isFile(void) const {
|
||||||
|
return type_ == FAT_FILE_TYPE_NORMAL;
|
||||||
|
}
|
||||||
|
/** \return True if this is a SdFile for an open file/directory else false. */
|
||||||
|
uint8_t isOpen(void) const {
|
||||||
|
return type_ != FAT_FILE_TYPE_CLOSED;
|
||||||
|
}
|
||||||
|
/** \return True if this is a SdFile for a subdirectory else false. */
|
||||||
|
uint8_t isSubDir(void) const {
|
||||||
|
return type_ == FAT_FILE_TYPE_SUBDIR;
|
||||||
|
}
|
||||||
|
/** \return True if this is a SdFile for the root directory. */
|
||||||
|
uint8_t isRoot(void) const {
|
||||||
|
return type_ == FAT_FILE_TYPE_ROOT16 || type_ == FAT_FILE_TYPE_ROOT32;
|
||||||
|
}
|
||||||
|
void ls(uint8_t flags = 0, uint8_t indent = 0);
|
||||||
|
uint8_t makeDir(SdFile* dir, const char* dirName);
|
||||||
|
uint8_t open(SdFile* dirFile, uint16_t index, uint8_t oflag);
|
||||||
|
uint8_t open(SdFile* dirFile, const char* fileName, uint8_t oflag);
|
||||||
|
|
||||||
|
uint8_t openRoot(SdVolume* vol);
|
||||||
|
static void printDirName(const dir_t& dir, uint8_t width);
|
||||||
|
static void printFatDate(uint16_t fatDate);
|
||||||
|
static void printFatTime(uint16_t fatTime);
|
||||||
|
static void printTwoDigits(uint8_t v);
|
||||||
|
/**
|
||||||
|
Read the next byte from a file.
|
||||||
|
|
||||||
|
\return For success read returns the next byte in the file as an int.
|
||||||
|
If an error occurs or end of file is reached -1 is returned.
|
||||||
|
*/
|
||||||
|
int16_t read(void) {
|
||||||
|
uint8_t b;
|
||||||
|
return read(&b, 1) == 1 ? b : -1;
|
||||||
|
}
|
||||||
|
int16_t read(void* buf, uint16_t nbyte);
|
||||||
|
int8_t readDir(dir_t* dir);
|
||||||
|
static uint8_t remove(SdFile* dirFile, const char* fileName);
|
||||||
|
uint8_t remove(void);
|
||||||
|
/** Set the file's current position to zero. */
|
||||||
|
void rewind(void) {
|
||||||
|
curPosition_ = curCluster_ = 0;
|
||||||
|
}
|
||||||
|
uint8_t rmDir(void);
|
||||||
|
uint8_t rmRfStar(void);
|
||||||
|
/** Set the files position to current position + \a pos. See seekSet(). */
|
||||||
|
uint8_t seekCur(uint32_t pos) {
|
||||||
|
return seekSet(curPosition_ + pos);
|
||||||
|
}
|
||||||
|
/**
|
||||||
|
Set the files current position to end of file. Useful to position
|
||||||
|
a file for append. See seekSet().
|
||||||
|
*/
|
||||||
|
uint8_t seekEnd(void) {
|
||||||
|
return seekSet(fileSize_);
|
||||||
|
}
|
||||||
|
uint8_t seekSet(uint32_t pos);
|
||||||
|
/**
|
||||||
|
Use unbuffered reads to access this file. Used with Wave
|
||||||
|
Shield ISR. Used with Sd2Card::partialBlockRead() in WaveRP.
|
||||||
|
|
||||||
|
Not recommended for normal applications.
|
||||||
|
*/
|
||||||
|
void setUnbufferedRead(void) {
|
||||||
|
if (isFile()) {
|
||||||
|
flags_ |= F_FILE_UNBUFFERED_READ;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
uint8_t timestamp(uint8_t flag, uint16_t year, uint8_t month, uint8_t day,
|
||||||
|
uint8_t hour, uint8_t minute, uint8_t second);
|
||||||
|
uint8_t sync(uint8_t blocking = 1);
|
||||||
|
/** Type of this SdFile. You should use isFile() or isDir() instead of type()
|
||||||
|
if possible.
|
||||||
|
|
||||||
|
\return The file or directory type.
|
||||||
|
*/
|
||||||
|
uint8_t type(void) const {
|
||||||
|
return type_;
|
||||||
|
}
|
||||||
|
uint8_t truncate(uint32_t size);
|
||||||
|
/** \return Unbuffered read flag. */
|
||||||
|
uint8_t unbufferedRead(void) const {
|
||||||
|
return flags_ & F_FILE_UNBUFFERED_READ;
|
||||||
|
}
|
||||||
|
/** \return SdVolume that contains this file. */
|
||||||
|
SdVolume* volume(void) const {
|
||||||
|
return vol_;
|
||||||
|
}
|
||||||
|
size_t write(uint8_t b);
|
||||||
|
size_t write(const void* buf, uint16_t nbyte);
|
||||||
|
size_t write(const char* str);
|
||||||
|
#ifdef __AVR__
|
||||||
|
void write_P(PGM_P str);
|
||||||
|
void writeln_P(PGM_P str);
|
||||||
|
#endif
|
||||||
|
int availableForWrite(void);
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
#if ALLOW_DEPRECATED_FUNCTIONS
|
||||||
|
// Deprecated functions - suppress cpplint warnings with NOLINT comment
|
||||||
|
/** \deprecated Use:
|
||||||
|
uint8_t SdFile::contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock);
|
||||||
|
*/
|
||||||
|
uint8_t contiguousRange(uint32_t& bgnBlock, uint32_t& endBlock) { // NOLINT
|
||||||
|
return contiguousRange(&bgnBlock, &endBlock);
|
||||||
|
}
|
||||||
|
/** \deprecated Use:
|
||||||
|
uint8_t SdFile::createContiguous(SdFile* dirFile,
|
||||||
|
const char* fileName, uint32_t size)
|
||||||
|
*/
|
||||||
|
uint8_t createContiguous(SdFile& dirFile, // NOLINT
|
||||||
|
const char* fileName, uint32_t size) {
|
||||||
|
return createContiguous(&dirFile, fileName, size);
|
||||||
|
}
|
||||||
|
|
||||||
|
/**
|
||||||
|
\deprecated Use:
|
||||||
|
static void SdFile::dateTimeCallback(
|
||||||
|
void (*dateTime)(uint16_t* date, uint16_t* time));
|
||||||
|
*/
|
||||||
|
static void dateTimeCallback(
|
||||||
|
void (*dateTime)(uint16_t& date, uint16_t& time)) { // NOLINT
|
||||||
|
oldDateTime_ = dateTime;
|
||||||
|
dateTime_ = dateTime ? oldToNew : 0;
|
||||||
|
}
|
||||||
|
/** \deprecated Use: uint8_t SdFile::dirEntry(dir_t* dir); */
|
||||||
|
uint8_t dirEntry(dir_t& dir) {
|
||||||
|
return dirEntry(&dir); // NOLINT
|
||||||
|
}
|
||||||
|
/** \deprecated Use:
|
||||||
|
uint8_t SdFile::makeDir(SdFile* dir, const char* dirName);
|
||||||
|
*/
|
||||||
|
uint8_t makeDir(SdFile& dir, const char* dirName) { // NOLINT
|
||||||
|
return makeDir(&dir, dirName);
|
||||||
|
}
|
||||||
|
/** \deprecated Use:
|
||||||
|
uint8_t SdFile::open(SdFile* dirFile, const char* fileName, uint8_t oflag);
|
||||||
|
*/
|
||||||
|
uint8_t open(SdFile& dirFile, // NOLINT
|
||||||
|
const char* fileName, uint8_t oflag) {
|
||||||
|
return open(&dirFile, fileName, oflag);
|
||||||
|
}
|
||||||
|
/** \deprecated Do not use in new apps */
|
||||||
|
uint8_t open(SdFile& dirFile, const char* fileName) { // NOLINT
|
||||||
|
return open(dirFile, fileName, O_RDWR);
|
||||||
|
}
|
||||||
|
/** \deprecated Use:
|
||||||
|
uint8_t SdFile::open(SdFile* dirFile, uint16_t index, uint8_t oflag);
|
||||||
|
*/
|
||||||
|
uint8_t open(SdFile& dirFile, uint16_t index, uint8_t oflag) { // NOLINT
|
||||||
|
return open(&dirFile, index, oflag);
|
||||||
|
}
|
||||||
|
/** \deprecated Use: uint8_t SdFile::openRoot(SdVolume* vol); */
|
||||||
|
uint8_t openRoot(SdVolume& vol) {
|
||||||
|
return openRoot(&vol); // NOLINT
|
||||||
|
}
|
||||||
|
|
||||||
|
/** \deprecated Use: int8_t SdFile::readDir(dir_t* dir); */
|
||||||
|
int8_t readDir(dir_t& dir) {
|
||||||
|
return readDir(&dir); // NOLINT
|
||||||
|
}
|
||||||
|
/** \deprecated Use:
|
||||||
|
static uint8_t SdFile::remove(SdFile* dirFile, const char* fileName);
|
||||||
|
*/
|
||||||
|
static uint8_t remove(SdFile& dirFile, const char* fileName) { // NOLINT
|
||||||
|
return remove(&dirFile, fileName);
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// rest are private
|
||||||
|
private:
|
||||||
|
static void (*oldDateTime_)(uint16_t& date, uint16_t& time); // NOLINT
|
||||||
|
static void oldToNew(uint16_t* date, uint16_t* time) {
|
||||||
|
uint16_t d;
|
||||||
|
uint16_t t;
|
||||||
|
oldDateTime_(d, t);
|
||||||
|
*date = d;
|
||||||
|
*time = t;
|
||||||
|
}
|
||||||
|
#endif // ALLOW_DEPRECATED_FUNCTIONS
|
||||||
|
private:
|
||||||
|
// bits defined in flags_
|
||||||
|
// should be 0XF
|
||||||
|
static uint8_t const F_OFLAG = (O_ACCMODE | O_APPEND | O_SYNC);
|
||||||
|
// available bits
|
||||||
|
static uint8_t const F_FILE_NON_BLOCKING_WRITE = 0X10;
|
||||||
|
// a new cluster was added to the file
|
||||||
|
static uint8_t const F_FILE_CLUSTER_ADDED = 0X20;
|
||||||
|
// use unbuffered SD read
|
||||||
|
static uint8_t const F_FILE_UNBUFFERED_READ = 0X40;
|
||||||
|
// sync of directory entry required
|
||||||
|
static uint8_t const F_FILE_DIR_DIRTY = 0X80;
|
||||||
|
|
||||||
|
// make sure F_OFLAG is ok
|
||||||
|
#if ((F_FILE_NON_BLOCKING_WRITE | F_FILE_CLUSTER_ADDED | F_FILE_UNBUFFERED_READ | F_FILE_DIR_DIRTY) & F_OFLAG)
|
||||||
|
#error flags_ bits conflict
|
||||||
|
#endif // flags_ bits
|
||||||
|
|
||||||
|
// private data
|
||||||
|
uint8_t flags_; // See above for definition of flags_ bits
|
||||||
|
uint8_t type_; // type of file see above for values
|
||||||
|
uint32_t curCluster_; // cluster for current file position
|
||||||
|
uint32_t curPosition_; // current file position in bytes from beginning
|
||||||
|
uint32_t dirBlock_; // SD block that contains directory entry for file
|
||||||
|
uint8_t dirIndex_; // index of entry in dirBlock 0 <= dirIndex_ <= 0XF
|
||||||
|
uint32_t fileSize_; // file size in bytes
|
||||||
|
uint32_t firstCluster_; // first cluster of file
|
||||||
|
SdVolume* vol_; // volume where file is located
|
||||||
|
|
||||||
|
// private functions
|
||||||
|
uint8_t addCluster(void);
|
||||||
|
uint8_t addDirCluster(void);
|
||||||
|
dir_t* cacheDirEntry(uint8_t action);
|
||||||
|
static void (*dateTime_)(uint16_t* date, uint16_t* time);
|
||||||
|
static uint8_t make83Name(const char* str, uint8_t* name);
|
||||||
|
uint8_t openCachedEntry(uint8_t cacheIndex, uint8_t oflags);
|
||||||
|
dir_t* readDirCache(void);
|
||||||
|
};
|
||||||
|
//==============================================================================
|
||||||
|
// SdVolume class
|
||||||
|
/**
|
||||||
|
\brief Cache for an SD data block
|
||||||
|
*/
|
||||||
|
union cache_t {
|
||||||
|
/** Used to access cached file data blocks. */
|
||||||
|
uint8_t data[512];
|
||||||
|
/** Used to access cached FAT16 entries. */
|
||||||
|
uint16_t fat16[256];
|
||||||
|
/** Used to access cached FAT32 entries. */
|
||||||
|
uint32_t fat32[128];
|
||||||
|
/** Used to access cached directory entries. */
|
||||||
|
dir_t dir[16];
|
||||||
|
/** Used to access a cached MasterBoot Record. */
|
||||||
|
mbr_t mbr;
|
||||||
|
/** Used to access to a cached FAT boot sector. */
|
||||||
|
fbs_t fbs;
|
||||||
|
};
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
\class SdVolume
|
||||||
|
\brief Access FAT16 and FAT32 volumes on SD and SDHC cards.
|
||||||
|
*/
|
||||||
|
class SdVolume {
|
||||||
|
public:
|
||||||
|
/** Create an instance of SdVolume */
|
||||||
|
SdVolume(void) : allocSearchStart_(2), fatType_(0) {}
|
||||||
|
/** Clear the cache and returns a pointer to the cache. Used by the WaveRP
|
||||||
|
recorder to do raw write to the SD card. Not for normal apps.
|
||||||
|
*/
|
||||||
|
static uint8_t* cacheClear(void) {
|
||||||
|
cacheFlush();
|
||||||
|
cacheBlockNumber_ = 0XFFFFFFFF;
|
||||||
|
return cacheBuffer_.data;
|
||||||
|
}
|
||||||
|
/**
|
||||||
|
Initialize a FAT volume. Try partition one first then try super
|
||||||
|
floppy format.
|
||||||
|
|
||||||
|
\param[in] dev The Sd2Card where the volume is located.
|
||||||
|
|
||||||
|
\return The value one, true, is returned for success and
|
||||||
|
the value zero, false, is returned for failure. Reasons for
|
||||||
|
failure include not finding a valid partition, not finding a valid
|
||||||
|
FAT file system or an I/O error.
|
||||||
|
*/
|
||||||
|
uint8_t init(Sd2Card* dev) {
|
||||||
|
return init(dev, 1) ? true : init(dev, 0);
|
||||||
|
}
|
||||||
|
uint8_t init(Sd2Card* dev, uint8_t part);
|
||||||
|
|
||||||
|
// inline functions that return volume info
|
||||||
|
/** \return The volume's cluster size in blocks. */
|
||||||
|
uint8_t blocksPerCluster(void) const {
|
||||||
|
return blocksPerCluster_;
|
||||||
|
}
|
||||||
|
/** \return The number of blocks in one FAT. */
|
||||||
|
uint32_t blocksPerFat(void) const {
|
||||||
|
return blocksPerFat_;
|
||||||
|
}
|
||||||
|
/** \return The total number of clusters in the volume. */
|
||||||
|
uint32_t clusterCount(void) const {
|
||||||
|
return clusterCount_;
|
||||||
|
}
|
||||||
|
/** \return The shift count required to multiply by blocksPerCluster. */
|
||||||
|
uint8_t clusterSizeShift(void) const {
|
||||||
|
return clusterSizeShift_;
|
||||||
|
}
|
||||||
|
/** \return The logical block number for the start of file data. */
|
||||||
|
uint32_t dataStartBlock(void) const {
|
||||||
|
return dataStartBlock_;
|
||||||
|
}
|
||||||
|
/** \return The number of FAT structures on the volume. */
|
||||||
|
uint8_t fatCount(void) const {
|
||||||
|
return fatCount_;
|
||||||
|
}
|
||||||
|
/** \return The logical block number for the start of the first FAT. */
|
||||||
|
uint32_t fatStartBlock(void) const {
|
||||||
|
return fatStartBlock_;
|
||||||
|
}
|
||||||
|
/** \return The FAT type of the volume. Values are 12, 16 or 32. */
|
||||||
|
uint8_t fatType(void) const {
|
||||||
|
return fatType_;
|
||||||
|
}
|
||||||
|
/** \return The number of entries in the root directory for FAT16 volumes. */
|
||||||
|
uint32_t rootDirEntryCount(void) const {
|
||||||
|
return rootDirEntryCount_;
|
||||||
|
}
|
||||||
|
/** \return The logical block number for the start of the root directory
|
||||||
|
on FAT16 volumes or the first cluster number on FAT32 volumes. */
|
||||||
|
uint32_t rootDirStart(void) const {
|
||||||
|
return rootDirStart_;
|
||||||
|
}
|
||||||
|
/** return a pointer to the Sd2Card object for this volume */
|
||||||
|
static Sd2Card* sdCard(void) {
|
||||||
|
return sdCard_;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
#if ALLOW_DEPRECATED_FUNCTIONS
|
||||||
|
// Deprecated functions - suppress cpplint warnings with NOLINT comment
|
||||||
|
/** \deprecated Use: uint8_t SdVolume::init(Sd2Card* dev); */
|
||||||
|
uint8_t init(Sd2Card& dev) {
|
||||||
|
return init(&dev); // NOLINT
|
||||||
|
}
|
||||||
|
|
||||||
|
/** \deprecated Use: uint8_t SdVolume::init(Sd2Card* dev, uint8_t vol); */
|
||||||
|
uint8_t init(Sd2Card& dev, uint8_t part) { // NOLINT
|
||||||
|
return init(&dev, part);
|
||||||
|
}
|
||||||
|
#endif // ALLOW_DEPRECATED_FUNCTIONS
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
private:
|
||||||
|
// Allow SdFile access to SdVolume private data.
|
||||||
|
friend class SdFile;
|
||||||
|
|
||||||
|
// value for action argument in cacheRawBlock to indicate read from cache
|
||||||
|
static uint8_t const CACHE_FOR_READ = 0;
|
||||||
|
// value for action argument in cacheRawBlock to indicate cache dirty
|
||||||
|
static uint8_t const CACHE_FOR_WRITE = 1;
|
||||||
|
|
||||||
|
static cache_t cacheBuffer_; // 512 byte cache for device blocks
|
||||||
|
static uint32_t cacheBlockNumber_; // Logical number of block in the cache
|
||||||
|
static Sd2Card* sdCard_; // Sd2Card object for cache
|
||||||
|
static uint8_t cacheDirty_; // cacheFlush() will write block if true
|
||||||
|
static uint32_t cacheMirrorBlock_; // block number for mirror FAT
|
||||||
|
//
|
||||||
|
uint32_t allocSearchStart_; // start cluster for alloc search
|
||||||
|
uint8_t blocksPerCluster_; // cluster size in blocks
|
||||||
|
uint32_t blocksPerFat_; // FAT size in blocks
|
||||||
|
uint32_t clusterCount_; // clusters in one FAT
|
||||||
|
uint8_t clusterSizeShift_; // shift to convert cluster count to block count
|
||||||
|
uint32_t dataStartBlock_; // first data block number
|
||||||
|
uint8_t fatCount_; // number of FATs on volume
|
||||||
|
uint32_t fatStartBlock_; // start block for first FAT
|
||||||
|
uint8_t fatType_; // volume type (12, 16, OR 32)
|
||||||
|
uint16_t rootDirEntryCount_; // number of entries in FAT16 root dir
|
||||||
|
uint32_t rootDirStart_; // root start block for FAT16, cluster for FAT32
|
||||||
|
//----------------------------------------------------------------------------
|
||||||
|
uint8_t allocContiguous(uint32_t count, uint32_t* curCluster);
|
||||||
|
uint8_t blockOfCluster(uint32_t position) const {
|
||||||
|
return (position >> 9) & (blocksPerCluster_ - 1);
|
||||||
|
}
|
||||||
|
uint32_t clusterStartBlock(uint32_t cluster) const {
|
||||||
|
return dataStartBlock_ + ((cluster - 2) << clusterSizeShift_);
|
||||||
|
}
|
||||||
|
uint32_t blockNumber(uint32_t cluster, uint32_t position) const {
|
||||||
|
return clusterStartBlock(cluster) + blockOfCluster(position);
|
||||||
|
}
|
||||||
|
static uint8_t cacheFlush(uint8_t blocking = 1);
|
||||||
|
static uint8_t cacheMirrorBlockFlush(uint8_t blocking);
|
||||||
|
static uint8_t cacheRawBlock(uint32_t blockNumber, uint8_t action);
|
||||||
|
static void cacheSetDirty(void) {
|
||||||
|
cacheDirty_ |= CACHE_FOR_WRITE;
|
||||||
|
}
|
||||||
|
static uint8_t cacheZeroBlock(uint32_t blockNumber);
|
||||||
|
uint8_t chainSize(uint32_t beginCluster, uint32_t* size) const;
|
||||||
|
uint8_t fatGet(uint32_t cluster, uint32_t* value) const;
|
||||||
|
uint8_t fatPut(uint32_t cluster, uint32_t value);
|
||||||
|
uint8_t fatPutEOC(uint32_t cluster) {
|
||||||
|
return fatPut(cluster, 0x0FFFFFFF);
|
||||||
|
}
|
||||||
|
uint8_t freeChain(uint32_t cluster);
|
||||||
|
uint8_t isEOC(uint32_t cluster) const {
|
||||||
|
return cluster >= (fatType_ == 16 ? FAT16EOC_MIN : FAT32EOC_MIN);
|
||||||
|
}
|
||||||
|
uint8_t readBlock(uint32_t block, uint8_t* dst) {
|
||||||
|
return sdCard_->readBlock(block, dst);
|
||||||
|
}
|
||||||
|
uint8_t readData(uint32_t block, uint16_t offset,
|
||||||
|
uint16_t count, uint8_t* dst) {
|
||||||
|
return sdCard_->readData(block, offset, count, dst);
|
||||||
|
}
|
||||||
|
uint8_t writeBlock(uint32_t block, const uint8_t* dst, uint8_t blocking = 1) {
|
||||||
|
return sdCard_->writeBlock(block, dst, blocking);
|
||||||
|
}
|
||||||
|
uint8_t isBusy(void) {
|
||||||
|
return sdCard_->isBusy();
|
||||||
|
}
|
||||||
|
uint8_t isCacheMirrorBlockDirty(void) {
|
||||||
|
return (cacheMirrorBlock_ != 0);
|
||||||
|
}
|
||||||
|
};
|
||||||
|
#endif // SdFat_h
|
||||||
77
libraries/SD/src/utility/SdFatUtil.h
Executable file
77
libraries/SD/src/utility/SdFatUtil.h
Executable file
|
|
@ -0,0 +1,77 @@
|
||||||
|
/* Arduino SdFat Library
|
||||||
|
Copyright (C) 2008 by William Greiman
|
||||||
|
|
||||||
|
This file is part of the Arduino SdFat Library
|
||||||
|
|
||||||
|
This Library is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 3 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This Library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with the Arduino SdFat Library. If not, see
|
||||||
|
<http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#ifndef SdFatUtil_h
|
||||||
|
#define SdFatUtil_h
|
||||||
|
/**
|
||||||
|
\file
|
||||||
|
Useful utility functions.
|
||||||
|
*/
|
||||||
|
#include <Arduino.h>
|
||||||
|
#ifdef __AVR__
|
||||||
|
#include <avr/pgmspace.h>
|
||||||
|
/** Store and print a string in flash memory.*/
|
||||||
|
#define PgmPrint(x) SerialPrint_P(PSTR(x))
|
||||||
|
/** Store and print a string in flash memory followed by a CR/LF.*/
|
||||||
|
#define PgmPrintln(x) SerialPrintln_P(PSTR(x))
|
||||||
|
/** Defined so doxygen works for function definitions. */
|
||||||
|
#endif
|
||||||
|
#define NOINLINE __attribute__((noinline,unused))
|
||||||
|
#define UNUSEDOK __attribute__((unused))
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** Return the number of bytes currently free in RAM. */
|
||||||
|
static UNUSEDOK int FreeRam(void) {
|
||||||
|
extern int __bss_end;
|
||||||
|
extern int* __brkval;
|
||||||
|
int free_memory;
|
||||||
|
if (reinterpret_cast<int>(__brkval) == 0) {
|
||||||
|
// if no heap use from end of bss section
|
||||||
|
free_memory = reinterpret_cast<int>(&free_memory)
|
||||||
|
- reinterpret_cast<int>(&__bss_end);
|
||||||
|
} else {
|
||||||
|
// use from top of stack to heap
|
||||||
|
free_memory = reinterpret_cast<int>(&free_memory)
|
||||||
|
- reinterpret_cast<int>(__brkval);
|
||||||
|
}
|
||||||
|
return free_memory;
|
||||||
|
}
|
||||||
|
#ifdef __AVR__
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
%Print a string in flash memory to the serial port.
|
||||||
|
|
||||||
|
\param[in] str Pointer to string stored in flash memory.
|
||||||
|
*/
|
||||||
|
static NOINLINE void SerialPrint_P(PGM_P str) {
|
||||||
|
for (uint8_t c; (c = pgm_read_byte(str)); str++) {
|
||||||
|
Serial.write(c);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
%Print a string in flash memory followed by a CR/LF.
|
||||||
|
|
||||||
|
\param[in] str Pointer to string stored in flash memory.
|
||||||
|
*/
|
||||||
|
static NOINLINE void SerialPrintln_P(PGM_P str) {
|
||||||
|
SerialPrint_P(str);
|
||||||
|
Serial.println();
|
||||||
|
}
|
||||||
|
#endif // __AVR__
|
||||||
|
#endif // #define SdFatUtil_h
|
||||||
202
libraries/SD/src/utility/SdFatmainpage.h
Executable file
202
libraries/SD/src/utility/SdFatmainpage.h
Executable file
|
|
@ -0,0 +1,202 @@
|
||||||
|
/* Arduino SdFat Library
|
||||||
|
Copyright (C) 2009 by William Greiman
|
||||||
|
|
||||||
|
This file is part of the Arduino SdFat Library
|
||||||
|
|
||||||
|
This Library is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 3 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This Library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with the Arduino SdFat Library. If not, see
|
||||||
|
<http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
\mainpage Arduino SdFat Library
|
||||||
|
<CENTER>Copyright © 2009 by William Greiman
|
||||||
|
</CENTER>
|
||||||
|
|
||||||
|
\section Intro Introduction
|
||||||
|
The Arduino SdFat Library is a minimal implementation of FAT16 and FAT32
|
||||||
|
file systems on SD flash memory cards. Standard SD and high capacity
|
||||||
|
SDHC cards are supported.
|
||||||
|
|
||||||
|
The SdFat only supports short 8.3 names.
|
||||||
|
|
||||||
|
The main classes in SdFat are Sd2Card, SdVolume, and SdFile.
|
||||||
|
|
||||||
|
The Sd2Card class supports access to standard SD cards and SDHC cards. Most
|
||||||
|
applications will only need to call the Sd2Card::init() member function.
|
||||||
|
|
||||||
|
The SdVolume class supports FAT16 and FAT32 partitions. Most applications
|
||||||
|
will only need to call the SdVolume::init() member function.
|
||||||
|
|
||||||
|
The SdFile class provides file access functions such as open(), read(),
|
||||||
|
remove(), write(), close() and sync(). This class supports access to the root
|
||||||
|
directory and subdirectories.
|
||||||
|
|
||||||
|
A number of example are provided in the SdFat/examples folder. These were
|
||||||
|
developed to test SdFat and illustrate its use.
|
||||||
|
|
||||||
|
SdFat was developed for high speed data recording. SdFat was used to implement
|
||||||
|
an audio record/play class, WaveRP, for the Adafruit Wave Shield. This
|
||||||
|
application uses special Sd2Card calls to write to contiguous files in raw mode.
|
||||||
|
These functions reduce write latency so that audio can be recorded with the
|
||||||
|
small amount of RAM in the Arduino.
|
||||||
|
|
||||||
|
\section SDcard SD\SDHC Cards
|
||||||
|
|
||||||
|
Arduinos access SD cards using the cards SPI protocol. PCs, Macs, and
|
||||||
|
most consumer devices use the 4-bit parallel SD protocol. A card that
|
||||||
|
functions well on A PC or Mac may not work well on the Arduino.
|
||||||
|
|
||||||
|
Most cards have good SPI read performance but cards vary widely in SPI
|
||||||
|
write performance. Write performance is limited by how efficiently the
|
||||||
|
card manages internal erase/remapping operations. The Arduino cannot
|
||||||
|
optimize writes to reduce erase operations because of its limit RAM.
|
||||||
|
|
||||||
|
SanDisk cards generally have good write performance. They seem to have
|
||||||
|
more internal RAM buffering than other cards and therefore can limit
|
||||||
|
the number of flash erase operations that the Arduino forces due to its
|
||||||
|
limited RAM.
|
||||||
|
|
||||||
|
\section Hardware Hardware Configuration
|
||||||
|
|
||||||
|
SdFat was developed using an
|
||||||
|
<A HREF = "http://www.adafruit.com/"> Adafruit Industries</A>
|
||||||
|
<A HREF = "http://www.ladyada.net/make/waveshield/"> Wave Shield</A>.
|
||||||
|
|
||||||
|
The hardware interface to the SD card should not use a resistor based level
|
||||||
|
shifter. SdFat sets the SPI bus frequency to 8 MHz which results in signal
|
||||||
|
rise times that are too slow for the edge detectors in many newer SD card
|
||||||
|
controllers when resistor voltage dividers are used.
|
||||||
|
|
||||||
|
The 5 to 3.3 V level shifter for 5 V Arduinos should be IC based like the
|
||||||
|
74HC4050N based circuit shown in the file SdLevel.png. The Adafruit Wave Shield
|
||||||
|
uses a 74AHC125N. Gravitech sells SD and MicroSD Card Adapters based on the
|
||||||
|
74LCX245.
|
||||||
|
|
||||||
|
If you are using a resistor based level shifter and are having problems try
|
||||||
|
setting the SPI bus frequency to 4 MHz. This can be done by using
|
||||||
|
card.init(SPI_HALF_SPEED) to initialize the SD card.
|
||||||
|
|
||||||
|
\section comment Bugs and Comments
|
||||||
|
|
||||||
|
If you wish to report bugs or have comments, send email to fat16lib@sbcglobal.net.
|
||||||
|
|
||||||
|
\section SdFatClass SdFat Usage
|
||||||
|
|
||||||
|
SdFat uses a slightly restricted form of short names.
|
||||||
|
Only printable ASCII characters are supported. No characters with code point
|
||||||
|
values greater than 127 are allowed. Space is not allowed even though space
|
||||||
|
was allowed in the API of early versions of DOS.
|
||||||
|
|
||||||
|
Short names are limited to 8 characters followed by an optional period (.)
|
||||||
|
and extension of up to 3 characters. The characters may be any combination
|
||||||
|
of letters and digits. The following special characters are also allowed:
|
||||||
|
|
||||||
|
$ % ' - _ @ ~ ` ! ( ) { } ^ # &
|
||||||
|
|
||||||
|
Short names are always converted to upper case and their original case
|
||||||
|
value is lost.
|
||||||
|
|
||||||
|
\note
|
||||||
|
The Arduino Print class uses character
|
||||||
|
at a time writes so it was necessary to use a \link SdFile::sync() sync() \endlink
|
||||||
|
function to control when data is written to the SD card.
|
||||||
|
|
||||||
|
\par
|
||||||
|
An application which writes to a file using \link Print::print() print()\endlink,
|
||||||
|
\link Print::println() println() \endlink
|
||||||
|
or \link SdFile::write write() \endlink must call \link SdFile::sync() sync() \endlink
|
||||||
|
at the appropriate time to force data and directory information to be written
|
||||||
|
to the SD Card. Data and directory information are also written to the SD card
|
||||||
|
when \link SdFile::close() close() \endlink is called.
|
||||||
|
|
||||||
|
\par
|
||||||
|
Applications must use care calling \link SdFile::sync() sync() \endlink
|
||||||
|
since 2048 bytes of I/O is required to update file and
|
||||||
|
directory information. This includes writing the current data block, reading
|
||||||
|
the block that contains the directory entry for update, writing the directory
|
||||||
|
block back and reading back the current data block.
|
||||||
|
|
||||||
|
It is possible to open a file with two or more instances of SdFile. A file may
|
||||||
|
be corrupted if data is written to the file by more than one instance of SdFile.
|
||||||
|
|
||||||
|
\section HowTo How to format SD Cards as FAT Volumes
|
||||||
|
|
||||||
|
You should use a freshly formatted SD card for best performance. FAT
|
||||||
|
file systems become slower if many files have been created and deleted.
|
||||||
|
This is because the directory entry for a deleted file is marked as deleted,
|
||||||
|
but is not deleted. When a new file is created, these entries must be scanned
|
||||||
|
before creating the file, a flaw in the FAT design. Also files can become
|
||||||
|
fragmented which causes reads and writes to be slower.
|
||||||
|
|
||||||
|
Microsoft operating systems support removable media formatted with a
|
||||||
|
Master Boot Record, MBR, or formatted as a super floppy with a FAT Boot Sector
|
||||||
|
in block zero.
|
||||||
|
|
||||||
|
Microsoft operating systems expect MBR formatted removable media
|
||||||
|
to have only one partition. The first partition should be used.
|
||||||
|
|
||||||
|
Microsoft operating systems do not support partitioning SD flash cards.
|
||||||
|
If you erase an SD card with a program like KillDisk, Most versions of
|
||||||
|
Windows will format the card as a super floppy.
|
||||||
|
|
||||||
|
The best way to restore an SD card's format is to use SDFormatter
|
||||||
|
which can be downloaded from:
|
||||||
|
|
||||||
|
http://www.sdcard.org/consumers/formatter/
|
||||||
|
|
||||||
|
SDFormatter aligns flash erase boundaries with file
|
||||||
|
system structures which reduces write latency and file system overhead.
|
||||||
|
|
||||||
|
SDFormatter does not have an option for FAT type so it may format
|
||||||
|
small cards as FAT12.
|
||||||
|
|
||||||
|
After the MBR is restored by SDFormatter you may need to reformat small
|
||||||
|
cards that have been formatted FAT12 to force the volume type to be FAT16.
|
||||||
|
|
||||||
|
If you reformat the SD card with an OS utility, choose a cluster size that
|
||||||
|
will result in:
|
||||||
|
|
||||||
|
4084 < CountOfClusters && CountOfClusters < 65525
|
||||||
|
|
||||||
|
The volume will then be FAT16.
|
||||||
|
|
||||||
|
If you are formatting an SD card on OS X or Linux, be sure to use the first
|
||||||
|
partition. Format this partition with a cluster count in above range.
|
||||||
|
|
||||||
|
\section References References
|
||||||
|
|
||||||
|
Adafruit Industries:
|
||||||
|
|
||||||
|
http://www.adafruit.com/
|
||||||
|
|
||||||
|
http://www.ladyada.net/make/waveshield/
|
||||||
|
|
||||||
|
The Arduino site:
|
||||||
|
|
||||||
|
http://www.arduino.cc/
|
||||||
|
|
||||||
|
For more information about FAT file systems see:
|
||||||
|
|
||||||
|
http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
|
||||||
|
|
||||||
|
For information about using SD cards as SPI devices see:
|
||||||
|
|
||||||
|
http://www.sdcard.org/developers/tech/sdcard/pls/Simplified_Physical_Layer_Spec.pdf
|
||||||
|
|
||||||
|
The ATmega328 datasheet:
|
||||||
|
|
||||||
|
http://www.atmel.com/dyn/resources/prod_documents/doc8161.pdf
|
||||||
|
|
||||||
|
|
||||||
|
*/
|
||||||
1527
libraries/SD/src/utility/SdFile.cpp
Executable file
1527
libraries/SD/src/utility/SdFile.cpp
Executable file
File diff suppressed because it is too large
Load Diff
232
libraries/SD/src/utility/SdInfo.h
Executable file
232
libraries/SD/src/utility/SdInfo.h
Executable file
|
|
@ -0,0 +1,232 @@
|
||||||
|
/* Arduino Sd2Card Library
|
||||||
|
Copyright (C) 2009 by William Greiman
|
||||||
|
|
||||||
|
This file is part of the Arduino Sd2Card Library
|
||||||
|
|
||||||
|
This Library is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 3 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This Library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with the Arduino Sd2Card Library. If not, see
|
||||||
|
<http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#ifndef SdInfo_h
|
||||||
|
#define SdInfo_h
|
||||||
|
#include <stdint.h>
|
||||||
|
// Based on the document:
|
||||||
|
//
|
||||||
|
// SD Specifications
|
||||||
|
// Part 1
|
||||||
|
// Physical Layer
|
||||||
|
// Simplified Specification
|
||||||
|
// Version 2.00
|
||||||
|
// September 25, 2006
|
||||||
|
//
|
||||||
|
// www.sdcard.org/developers/tech/sdcard/pls/Simplified_Physical_Layer_Spec.pdf
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// SD card commands
|
||||||
|
/** GO_IDLE_STATE - init card in spi mode if CS low */
|
||||||
|
uint8_t const CMD0 = 0X00;
|
||||||
|
/** SEND_IF_COND - verify SD Memory Card interface operating condition.*/
|
||||||
|
uint8_t const CMD8 = 0X08;
|
||||||
|
/** SEND_CSD - read the Card Specific Data (CSD register) */
|
||||||
|
uint8_t const CMD9 = 0X09;
|
||||||
|
/** SEND_CID - read the card identification information (CID register) */
|
||||||
|
uint8_t const CMD10 = 0X0A;
|
||||||
|
/** SEND_STATUS - read the card status register */
|
||||||
|
uint8_t const CMD13 = 0X0D;
|
||||||
|
/** READ_BLOCK - read a single data block from the card */
|
||||||
|
uint8_t const CMD17 = 0X11;
|
||||||
|
/** WRITE_BLOCK - write a single data block to the card */
|
||||||
|
uint8_t const CMD24 = 0X18;
|
||||||
|
/** WRITE_MULTIPLE_BLOCK - write blocks of data until a STOP_TRANSMISSION */
|
||||||
|
uint8_t const CMD25 = 0X19;
|
||||||
|
/** ERASE_WR_BLK_START - sets the address of the first block to be erased */
|
||||||
|
uint8_t const CMD32 = 0X20;
|
||||||
|
/** ERASE_WR_BLK_END - sets the address of the last block of the continuous
|
||||||
|
range to be erased*/
|
||||||
|
uint8_t const CMD33 = 0X21;
|
||||||
|
/** ERASE - erase all previously selected blocks */
|
||||||
|
uint8_t const CMD38 = 0X26;
|
||||||
|
/** APP_CMD - escape for application specific command */
|
||||||
|
uint8_t const CMD55 = 0X37;
|
||||||
|
/** READ_OCR - read the OCR register of a card */
|
||||||
|
uint8_t const CMD58 = 0X3A;
|
||||||
|
/** SET_WR_BLK_ERASE_COUNT - Set the number of write blocks to be
|
||||||
|
pre-erased before writing */
|
||||||
|
uint8_t const ACMD23 = 0X17;
|
||||||
|
/** SD_SEND_OP_COMD - Sends host capacity support information and
|
||||||
|
activates the card's initialization process */
|
||||||
|
uint8_t const ACMD41 = 0X29;
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/** status for card in the ready state */
|
||||||
|
uint8_t const R1_READY_STATE = 0X00;
|
||||||
|
/** status for card in the idle state */
|
||||||
|
uint8_t const R1_IDLE_STATE = 0X01;
|
||||||
|
/** status bit for illegal command */
|
||||||
|
uint8_t const R1_ILLEGAL_COMMAND = 0X04;
|
||||||
|
/** start data token for read or write single block*/
|
||||||
|
uint8_t const DATA_START_BLOCK = 0XFE;
|
||||||
|
/** stop token for write multiple blocks*/
|
||||||
|
uint8_t const STOP_TRAN_TOKEN = 0XFD;
|
||||||
|
/** start data token for write multiple blocks*/
|
||||||
|
uint8_t const WRITE_MULTIPLE_TOKEN = 0XFC;
|
||||||
|
/** mask for data response tokens after a write block operation */
|
||||||
|
uint8_t const DATA_RES_MASK = 0X1F;
|
||||||
|
/** write data accepted token */
|
||||||
|
uint8_t const DATA_RES_ACCEPTED = 0X05;
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
typedef struct CID {
|
||||||
|
// byte 0
|
||||||
|
uint8_t mid; // Manufacturer ID
|
||||||
|
// byte 1-2
|
||||||
|
char oid[2]; // OEM/Application ID
|
||||||
|
// byte 3-7
|
||||||
|
char pnm[5]; // Product name
|
||||||
|
// byte 8
|
||||||
|
unsigned prv_m : 4; // Product revision n.m
|
||||||
|
unsigned prv_n : 4;
|
||||||
|
// byte 9-12
|
||||||
|
uint32_t psn; // Product serial number
|
||||||
|
// byte 13
|
||||||
|
unsigned mdt_year_high : 4; // Manufacturing date
|
||||||
|
unsigned reserved : 4;
|
||||||
|
// byte 14
|
||||||
|
unsigned mdt_month : 4;
|
||||||
|
unsigned mdt_year_low : 4;
|
||||||
|
// byte 15
|
||||||
|
unsigned always1 : 1;
|
||||||
|
unsigned crc : 7;
|
||||||
|
} cid_t;
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// CSD for version 1.00 cards
|
||||||
|
typedef struct CSDV1 {
|
||||||
|
// byte 0
|
||||||
|
unsigned reserved1 : 6;
|
||||||
|
unsigned csd_ver : 2;
|
||||||
|
// byte 1
|
||||||
|
uint8_t taac;
|
||||||
|
// byte 2
|
||||||
|
uint8_t nsac;
|
||||||
|
// byte 3
|
||||||
|
uint8_t tran_speed;
|
||||||
|
// byte 4
|
||||||
|
uint8_t ccc_high;
|
||||||
|
// byte 5
|
||||||
|
unsigned read_bl_len : 4;
|
||||||
|
unsigned ccc_low : 4;
|
||||||
|
// byte 6
|
||||||
|
unsigned c_size_high : 2;
|
||||||
|
unsigned reserved2 : 2;
|
||||||
|
unsigned dsr_imp : 1;
|
||||||
|
unsigned read_blk_misalign : 1;
|
||||||
|
unsigned write_blk_misalign : 1;
|
||||||
|
unsigned read_bl_partial : 1;
|
||||||
|
// byte 7
|
||||||
|
uint8_t c_size_mid;
|
||||||
|
// byte 8
|
||||||
|
unsigned vdd_r_curr_max : 3;
|
||||||
|
unsigned vdd_r_curr_min : 3;
|
||||||
|
unsigned c_size_low : 2;
|
||||||
|
// byte 9
|
||||||
|
unsigned c_size_mult_high : 2;
|
||||||
|
unsigned vdd_w_cur_max : 3;
|
||||||
|
unsigned vdd_w_curr_min : 3;
|
||||||
|
// byte 10
|
||||||
|
unsigned sector_size_high : 6;
|
||||||
|
unsigned erase_blk_en : 1;
|
||||||
|
unsigned c_size_mult_low : 1;
|
||||||
|
// byte 11
|
||||||
|
unsigned wp_grp_size : 7;
|
||||||
|
unsigned sector_size_low : 1;
|
||||||
|
// byte 12
|
||||||
|
unsigned write_bl_len_high : 2;
|
||||||
|
unsigned r2w_factor : 3;
|
||||||
|
unsigned reserved3 : 2;
|
||||||
|
unsigned wp_grp_enable : 1;
|
||||||
|
// byte 13
|
||||||
|
unsigned reserved4 : 5;
|
||||||
|
unsigned write_partial : 1;
|
||||||
|
unsigned write_bl_len_low : 2;
|
||||||
|
// byte 14
|
||||||
|
unsigned reserved5: 2;
|
||||||
|
unsigned file_format : 2;
|
||||||
|
unsigned tmp_write_protect : 1;
|
||||||
|
unsigned perm_write_protect : 1;
|
||||||
|
unsigned copy : 1;
|
||||||
|
unsigned file_format_grp : 1;
|
||||||
|
// byte 15
|
||||||
|
unsigned always1 : 1;
|
||||||
|
unsigned crc : 7;
|
||||||
|
} csd1_t;
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// CSD for version 2.00 cards
|
||||||
|
typedef struct CSDV2 {
|
||||||
|
// byte 0
|
||||||
|
unsigned reserved1 : 6;
|
||||||
|
unsigned csd_ver : 2;
|
||||||
|
// byte 1
|
||||||
|
uint8_t taac;
|
||||||
|
// byte 2
|
||||||
|
uint8_t nsac;
|
||||||
|
// byte 3
|
||||||
|
uint8_t tran_speed;
|
||||||
|
// byte 4
|
||||||
|
uint8_t ccc_high;
|
||||||
|
// byte 5
|
||||||
|
unsigned read_bl_len : 4;
|
||||||
|
unsigned ccc_low : 4;
|
||||||
|
// byte 6
|
||||||
|
unsigned reserved2 : 4;
|
||||||
|
unsigned dsr_imp : 1;
|
||||||
|
unsigned read_blk_misalign : 1;
|
||||||
|
unsigned write_blk_misalign : 1;
|
||||||
|
unsigned read_bl_partial : 1;
|
||||||
|
// byte 7
|
||||||
|
unsigned reserved3 : 2;
|
||||||
|
unsigned c_size_high : 6;
|
||||||
|
// byte 8
|
||||||
|
uint8_t c_size_mid;
|
||||||
|
// byte 9
|
||||||
|
uint8_t c_size_low;
|
||||||
|
// byte 10
|
||||||
|
unsigned sector_size_high : 6;
|
||||||
|
unsigned erase_blk_en : 1;
|
||||||
|
unsigned reserved4 : 1;
|
||||||
|
// byte 11
|
||||||
|
unsigned wp_grp_size : 7;
|
||||||
|
unsigned sector_size_low : 1;
|
||||||
|
// byte 12
|
||||||
|
unsigned write_bl_len_high : 2;
|
||||||
|
unsigned r2w_factor : 3;
|
||||||
|
unsigned reserved5 : 2;
|
||||||
|
unsigned wp_grp_enable : 1;
|
||||||
|
// byte 13
|
||||||
|
unsigned reserved6 : 5;
|
||||||
|
unsigned write_partial : 1;
|
||||||
|
unsigned write_bl_len_low : 2;
|
||||||
|
// byte 14
|
||||||
|
unsigned reserved7: 2;
|
||||||
|
unsigned file_format : 2;
|
||||||
|
unsigned tmp_write_protect : 1;
|
||||||
|
unsigned perm_write_protect : 1;
|
||||||
|
unsigned copy : 1;
|
||||||
|
unsigned file_format_grp : 1;
|
||||||
|
// byte 15
|
||||||
|
unsigned always1 : 1;
|
||||||
|
unsigned crc : 7;
|
||||||
|
} csd2_t;
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// union of old and new style CSD register
|
||||||
|
union csd_t {
|
||||||
|
csd1_t v1;
|
||||||
|
csd2_t v2;
|
||||||
|
};
|
||||||
|
#endif // SdInfo_h
|
||||||
351
libraries/SD/src/utility/SdVolume.cpp
Executable file
351
libraries/SD/src/utility/SdVolume.cpp
Executable file
|
|
@ -0,0 +1,351 @@
|
||||||
|
/* Arduino SdFat Library
|
||||||
|
Copyright (C) 2009 by William Greiman
|
||||||
|
|
||||||
|
This file is part of the Arduino SdFat Library
|
||||||
|
|
||||||
|
This Library is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 3 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This Library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with the Arduino SdFat Library. If not, see
|
||||||
|
<http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#include "SdFat.h"
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// raw block cache
|
||||||
|
// init cacheBlockNumber_to invalid SD block number
|
||||||
|
uint32_t SdVolume::cacheBlockNumber_ = 0XFFFFFFFF;
|
||||||
|
cache_t SdVolume::cacheBuffer_; // 512 byte cache for Sd2Card
|
||||||
|
Sd2Card* SdVolume::sdCard_; // pointer to SD card object
|
||||||
|
uint8_t SdVolume::cacheDirty_ = 0; // cacheFlush() will write block if true
|
||||||
|
uint32_t SdVolume::cacheMirrorBlock_ = 0; // mirror block for second FAT
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// find a contiguous group of clusters
|
||||||
|
uint8_t SdVolume::allocContiguous(uint32_t count, uint32_t* curCluster) {
|
||||||
|
// start of group
|
||||||
|
uint32_t bgnCluster;
|
||||||
|
|
||||||
|
// flag to save place to start next search
|
||||||
|
uint8_t setStart;
|
||||||
|
|
||||||
|
// set search start cluster
|
||||||
|
if (*curCluster) {
|
||||||
|
// try to make file contiguous
|
||||||
|
bgnCluster = *curCluster + 1;
|
||||||
|
|
||||||
|
// don't save new start location
|
||||||
|
setStart = false;
|
||||||
|
} else {
|
||||||
|
// start at likely place for free cluster
|
||||||
|
bgnCluster = allocSearchStart_;
|
||||||
|
|
||||||
|
// save next search start if one cluster
|
||||||
|
setStart = 1 == count;
|
||||||
|
}
|
||||||
|
// end of group
|
||||||
|
uint32_t endCluster = bgnCluster;
|
||||||
|
|
||||||
|
// last cluster of FAT
|
||||||
|
uint32_t fatEnd = clusterCount_ + 1;
|
||||||
|
|
||||||
|
// search the FAT for free clusters
|
||||||
|
for (uint32_t n = 0;; n++, endCluster++) {
|
||||||
|
// can't find space checked all clusters
|
||||||
|
if (n >= clusterCount_) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
// past end - start from beginning of FAT
|
||||||
|
if (endCluster > fatEnd) {
|
||||||
|
bgnCluster = endCluster = 2;
|
||||||
|
}
|
||||||
|
uint32_t f;
|
||||||
|
if (!fatGet(endCluster, &f)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (f != 0) {
|
||||||
|
// cluster in use try next cluster as bgnCluster
|
||||||
|
bgnCluster = endCluster + 1;
|
||||||
|
} else if ((endCluster - bgnCluster + 1) == count) {
|
||||||
|
// done - found space
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
// mark end of chain
|
||||||
|
if (!fatPutEOC(endCluster)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
// link clusters
|
||||||
|
while (endCluster > bgnCluster) {
|
||||||
|
if (!fatPut(endCluster - 1, endCluster)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
endCluster--;
|
||||||
|
}
|
||||||
|
if (*curCluster != 0) {
|
||||||
|
// connect chains
|
||||||
|
if (!fatPut(*curCluster, bgnCluster)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
// return first cluster number to caller
|
||||||
|
*curCluster = bgnCluster;
|
||||||
|
|
||||||
|
// remember possible next free cluster
|
||||||
|
if (setStart) {
|
||||||
|
allocSearchStart_ = bgnCluster + 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
uint8_t SdVolume::cacheFlush(uint8_t blocking) {
|
||||||
|
if (cacheDirty_) {
|
||||||
|
if (!sdCard_->writeBlock(cacheBlockNumber_, cacheBuffer_.data, blocking)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (!blocking) {
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
|
||||||
|
// mirror FAT tables
|
||||||
|
if (!cacheMirrorBlockFlush(blocking)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
cacheDirty_ = 0;
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
uint8_t SdVolume::cacheMirrorBlockFlush(uint8_t blocking) {
|
||||||
|
if (cacheMirrorBlock_) {
|
||||||
|
if (!sdCard_->writeBlock(cacheMirrorBlock_, cacheBuffer_.data, blocking)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
cacheMirrorBlock_ = 0;
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
uint8_t SdVolume::cacheRawBlock(uint32_t blockNumber, uint8_t action) {
|
||||||
|
if (cacheBlockNumber_ != blockNumber) {
|
||||||
|
if (!cacheFlush()) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
if (!sdCard_->readBlock(blockNumber, cacheBuffer_.data)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
cacheBlockNumber_ = blockNumber;
|
||||||
|
}
|
||||||
|
cacheDirty_ |= action;
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// cache a zero block for blockNumber
|
||||||
|
uint8_t SdVolume::cacheZeroBlock(uint32_t blockNumber) {
|
||||||
|
if (!cacheFlush()) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
// loop take less flash than memset(cacheBuffer_.data, 0, 512);
|
||||||
|
for (uint16_t i = 0; i < 512; i++) {
|
||||||
|
cacheBuffer_.data[i] = 0;
|
||||||
|
}
|
||||||
|
cacheBlockNumber_ = blockNumber;
|
||||||
|
cacheSetDirty();
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// return the size in bytes of a cluster chain
|
||||||
|
uint8_t SdVolume::chainSize(uint32_t cluster, uint32_t* size) const {
|
||||||
|
uint32_t s = 0;
|
||||||
|
do {
|
||||||
|
if (!fatGet(cluster, &cluster)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
s += 512UL << clusterSizeShift_;
|
||||||
|
} while (!isEOC(cluster));
|
||||||
|
*size = s;
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// Fetch a FAT entry
|
||||||
|
uint8_t SdVolume::fatGet(uint32_t cluster, uint32_t* value) const {
|
||||||
|
if (cluster > (clusterCount_ + 1)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
uint32_t lba = fatStartBlock_;
|
||||||
|
lba += fatType_ == 16 ? cluster >> 8 : cluster >> 7;
|
||||||
|
if (lba != cacheBlockNumber_) {
|
||||||
|
if (!cacheRawBlock(lba, CACHE_FOR_READ)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (fatType_ == 16) {
|
||||||
|
*value = cacheBuffer_.fat16[cluster & 0XFF];
|
||||||
|
} else {
|
||||||
|
*value = cacheBuffer_.fat32[cluster & 0X7F] & FAT32MASK;
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// Store a FAT entry
|
||||||
|
uint8_t SdVolume::fatPut(uint32_t cluster, uint32_t value) {
|
||||||
|
// error if reserved cluster
|
||||||
|
if (cluster < 2) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
// error if not in FAT
|
||||||
|
if (cluster > (clusterCount_ + 1)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
// calculate block address for entry
|
||||||
|
uint32_t lba = fatStartBlock_;
|
||||||
|
lba += fatType_ == 16 ? cluster >> 8 : cluster >> 7;
|
||||||
|
|
||||||
|
if (lba != cacheBlockNumber_) {
|
||||||
|
if (!cacheRawBlock(lba, CACHE_FOR_READ)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
// store entry
|
||||||
|
if (fatType_ == 16) {
|
||||||
|
cacheBuffer_.fat16[cluster & 0XFF] = value;
|
||||||
|
} else {
|
||||||
|
cacheBuffer_.fat32[cluster & 0X7F] = value;
|
||||||
|
}
|
||||||
|
cacheSetDirty();
|
||||||
|
|
||||||
|
// mirror second FAT
|
||||||
|
if (fatCount_ > 1) {
|
||||||
|
cacheMirrorBlock_ = lba + blocksPerFat_;
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
// free a cluster chain
|
||||||
|
uint8_t SdVolume::freeChain(uint32_t cluster) {
|
||||||
|
// clear free cluster location
|
||||||
|
allocSearchStart_ = 2;
|
||||||
|
|
||||||
|
do {
|
||||||
|
uint32_t next;
|
||||||
|
if (!fatGet(cluster, &next)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
// free cluster
|
||||||
|
if (!fatPut(cluster, 0)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
|
||||||
|
cluster = next;
|
||||||
|
} while (!isEOC(cluster));
|
||||||
|
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
//------------------------------------------------------------------------------
|
||||||
|
/**
|
||||||
|
Initialize a FAT volume.
|
||||||
|
|
||||||
|
\param[in] dev The SD card where the volume is located.
|
||||||
|
|
||||||
|
\param[in] part The partition to be used. Legal values for \a part are
|
||||||
|
1-4 to use the corresponding partition on a device formatted with
|
||||||
|
a MBR, Master Boot Record, or zero if the device is formatted as
|
||||||
|
a super floppy with the FAT boot sector in block zero.
|
||||||
|
|
||||||
|
\return The value one, true, is returned for success and
|
||||||
|
the value zero, false, is returned for failure. Reasons for
|
||||||
|
failure include not finding a valid partition, not finding a valid
|
||||||
|
FAT file system in the specified partition or an I/O error.
|
||||||
|
*/
|
||||||
|
uint8_t SdVolume::init(Sd2Card* dev, uint8_t part) {
|
||||||
|
uint32_t volumeStartBlock = 0;
|
||||||
|
sdCard_ = dev;
|
||||||
|
// if part == 0 assume super floppy with FAT boot sector in block zero
|
||||||
|
// if part > 0 assume mbr volume with partition table
|
||||||
|
if (part) {
|
||||||
|
if (part > 4) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
part_t* p = &cacheBuffer_.mbr.part[part - 1];
|
||||||
|
if ((p->boot & 0X7F) != 0 ||
|
||||||
|
p->totalSectors < 100 ||
|
||||||
|
p->firstSector == 0) {
|
||||||
|
// not a valid partition
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
volumeStartBlock = p->firstSector;
|
||||||
|
}
|
||||||
|
if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
bpb_t* bpb = &cacheBuffer_.fbs.bpb;
|
||||||
|
if (bpb->bytesPerSector != 512 ||
|
||||||
|
bpb->fatCount == 0 ||
|
||||||
|
bpb->reservedSectorCount == 0 ||
|
||||||
|
bpb->sectorsPerCluster == 0) {
|
||||||
|
// not valid FAT volume
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
fatCount_ = bpb->fatCount;
|
||||||
|
blocksPerCluster_ = bpb->sectorsPerCluster;
|
||||||
|
|
||||||
|
// determine shift that is same as multiply by blocksPerCluster_
|
||||||
|
clusterSizeShift_ = 0;
|
||||||
|
while (blocksPerCluster_ != (1 << clusterSizeShift_)) {
|
||||||
|
// error if not power of 2
|
||||||
|
if (clusterSizeShift_++ > 7) {
|
||||||
|
return false;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
blocksPerFat_ = bpb->sectorsPerFat16 ?
|
||||||
|
bpb->sectorsPerFat16 : bpb->sectorsPerFat32;
|
||||||
|
|
||||||
|
fatStartBlock_ = volumeStartBlock + bpb->reservedSectorCount;
|
||||||
|
|
||||||
|
// count for FAT16 zero for FAT32
|
||||||
|
rootDirEntryCount_ = bpb->rootDirEntryCount;
|
||||||
|
|
||||||
|
// directory start for FAT16 dataStart for FAT32
|
||||||
|
rootDirStart_ = fatStartBlock_ + bpb->fatCount * blocksPerFat_;
|
||||||
|
|
||||||
|
// data start for FAT16 and FAT32
|
||||||
|
dataStartBlock_ = rootDirStart_ + ((32 * bpb->rootDirEntryCount + 511) / 512);
|
||||||
|
|
||||||
|
// total blocks for FAT16 or FAT32
|
||||||
|
uint32_t totalBlocks = bpb->totalSectors16 ?
|
||||||
|
bpb->totalSectors16 : bpb->totalSectors32;
|
||||||
|
// total data blocks
|
||||||
|
clusterCount_ = totalBlocks - (dataStartBlock_ - volumeStartBlock);
|
||||||
|
|
||||||
|
// divide by cluster size to get cluster count
|
||||||
|
clusterCount_ >>= clusterSizeShift_;
|
||||||
|
|
||||||
|
// FAT type is determined by cluster count
|
||||||
|
if (clusterCount_ < 4085) {
|
||||||
|
fatType_ = 12;
|
||||||
|
} else if (clusterCount_ < 65525) {
|
||||||
|
fatType_ = 16;
|
||||||
|
} else {
|
||||||
|
rootDirStart_ = bpb->fat32RootCluster;
|
||||||
|
fatType_ = 32;
|
||||||
|
}
|
||||||
|
return true;
|
||||||
|
}
|
||||||
861
libraries/SX1278FSK/SX1278FSK.cpp
Executable file
861
libraries/SX1278FSK/SX1278FSK.cpp
Executable file
|
|
@ -0,0 +1,861 @@
|
||||||
|
/*
|
||||||
|
* Functions for using SX127x in FSK mode (mainly receive)
|
||||||
|
* Copyright (C) 2019 Hansi Reiser, dl9rdz
|
||||||
|
*
|
||||||
|
* Partially based on the SX1278 libraray for managing Semtech modules
|
||||||
|
* Copyright (C) 2015 Wireless Open Source
|
||||||
|
* http://wirelessopensource.com
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: LGPL-2.1+
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "SX1278FSK.h"
|
||||||
|
#include "SPI.h"
|
||||||
|
#include <Sonde.h>
|
||||||
|
#include <Display.h>
|
||||||
|
|
||||||
|
SX1278FSK::SX1278FSK()
|
||||||
|
{
|
||||||
|
// Initialize class variables
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
static SPISettings spiset = SPISettings(40000000L, MSBFIRST, SPI_MODE0);
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: Turns the module ON.
|
||||||
|
Returns: 0 on success, 1 otherwise
|
||||||
|
*/
|
||||||
|
uint8_t SX1278FSK::ON()
|
||||||
|
{
|
||||||
|
uint8_t state = 2;
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println();
|
||||||
|
Serial.println(F("Starting 'ON'"));
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Powering the module
|
||||||
|
pinMode(SX1278_SS, OUTPUT);
|
||||||
|
digitalWrite(SX1278_SS, HIGH);
|
||||||
|
|
||||||
|
//Configure the MISO, MOSI, CS, SPCR.
|
||||||
|
SPI.begin();
|
||||||
|
//Set most significant bit first
|
||||||
|
SPI.setBitOrder(MSBFIRST);
|
||||||
|
//Divide the clock frequency
|
||||||
|
SPI.setClockDivider(SPI_CLOCK_DIV2);
|
||||||
|
//Set data mode
|
||||||
|
SPI.setDataMode(SPI_MODE0);
|
||||||
|
|
||||||
|
// Set Maximum Over Current Protection
|
||||||
|
state = setMaxCurrent(0x1B);
|
||||||
|
if( state == 0 )
|
||||||
|
{
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println(F("## Setting ON with maximum current supply ##"));
|
||||||
|
Serial.println();
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
// set FSK mode
|
||||||
|
state = setFSK();
|
||||||
|
return state;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: Turn the module OFF.
|
||||||
|
Returns: Nothing
|
||||||
|
*/
|
||||||
|
void SX1278FSK::OFF()
|
||||||
|
{
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println();
|
||||||
|
Serial.println(F("Starting 'OFF'"));
|
||||||
|
#endif
|
||||||
|
|
||||||
|
SPI.end();
|
||||||
|
// Powering the module
|
||||||
|
pinMode(SX1278_SS,OUTPUT);
|
||||||
|
digitalWrite(SX1278_SS,LOW);
|
||||||
|
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println(F("## Setting OFF ##"));
|
||||||
|
Serial.println();
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: Reads the indicated register.
|
||||||
|
Returns: The content of the register
|
||||||
|
Parameters:
|
||||||
|
address: address register to read from
|
||||||
|
*/
|
||||||
|
byte SX1278FSK::readRegister(byte address)
|
||||||
|
{
|
||||||
|
byte value = 0x00;
|
||||||
|
|
||||||
|
SPI.beginTransaction(spiset);
|
||||||
|
digitalWrite(SX1278_SS,LOW);
|
||||||
|
|
||||||
|
//delay(1);
|
||||||
|
bitClear(address, 7); // Bit 7 cleared to write in registers
|
||||||
|
SPI.transfer(address);
|
||||||
|
value = SPI.transfer(0x00);
|
||||||
|
digitalWrite(SX1278_SS,HIGH);
|
||||||
|
SPI.endTransaction();
|
||||||
|
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
if(address!=0x3F) {
|
||||||
|
Serial.print(F("## Reading: ##\t"));
|
||||||
|
Serial.print(F("Register "));
|
||||||
|
Serial.print(address, HEX);
|
||||||
|
Serial.print(F(": "));
|
||||||
|
Serial.print(value, HEX);
|
||||||
|
Serial.println();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return value;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: Writes on the indicated register.
|
||||||
|
Returns: Nothing
|
||||||
|
Parameters:
|
||||||
|
address: address register to write in
|
||||||
|
data: value to write in the register
|
||||||
|
*/
|
||||||
|
void SX1278FSK::writeRegister(byte address, byte data)
|
||||||
|
{
|
||||||
|
SPI.beginTransaction(spiset);
|
||||||
|
digitalWrite(SX1278_SS,LOW);
|
||||||
|
|
||||||
|
//delay(1);
|
||||||
|
bitSet(address, 7); // Bit 7 set to read from registers
|
||||||
|
SPI.transfer(address);
|
||||||
|
SPI.transfer(data);
|
||||||
|
digitalWrite(SX1278_SS,HIGH);
|
||||||
|
SPI.endTransaction();
|
||||||
|
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.print(F("## Writing: ##\t"));
|
||||||
|
Serial.print(F("Register "));
|
||||||
|
bitClear(address, 7);
|
||||||
|
Serial.print(address, HEX);
|
||||||
|
Serial.print(F(": "));
|
||||||
|
Serial.print(data, HEX);
|
||||||
|
Serial.println();
|
||||||
|
#endif
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Function: Clears the IRQ flags
|
||||||
|
*
|
||||||
|
* Configuration registers are accessed through the SPI interface.
|
||||||
|
* Registers are readable in all device mode including Sleep. However, they
|
||||||
|
* should be written only in Sleep and Stand-by modes.
|
||||||
|
*
|
||||||
|
* Returns: Nothing
|
||||||
|
*/
|
||||||
|
void SX1278FSK::clearIRQFlags()
|
||||||
|
{
|
||||||
|
byte st0;
|
||||||
|
|
||||||
|
// Save the previous status
|
||||||
|
st0 = readRegister(REG_OP_MODE);
|
||||||
|
// Stdby mode to write in registers
|
||||||
|
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE);
|
||||||
|
// FSK mode flags1 register
|
||||||
|
writeRegister(REG_IRQ_FLAGS1, 0xFF);
|
||||||
|
// FSK mode flags2 register
|
||||||
|
writeRegister(REG_IRQ_FLAGS2, 0xFF);
|
||||||
|
// Getting back to previous status
|
||||||
|
if(st0 != FSK_STANDBY_MODE) {
|
||||||
|
writeRegister(REG_OP_MODE, st0);
|
||||||
|
}
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println(F("## FSK flags cleared ##"));
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: Sets the module in FSK mode.
|
||||||
|
Returns: Integer that determines if there has been any error
|
||||||
|
state = 2 --> The command has not been executed
|
||||||
|
state = 1 --> There has been an error while executing the command
|
||||||
|
state = 0 --> The command has been executed with no errors
|
||||||
|
*/
|
||||||
|
uint8_t SX1278FSK::setFSK()
|
||||||
|
{
|
||||||
|
uint8_t state = 2;
|
||||||
|
byte st0;
|
||||||
|
byte config1;
|
||||||
|
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println();
|
||||||
|
Serial.println(F("Starting 'setFSK'"));
|
||||||
|
#endif
|
||||||
|
|
||||||
|
writeRegister(REG_OP_MODE, FSK_SLEEP_MODE); // Sleep mode (mandatory to change mode)
|
||||||
|
// If we are in LORA mode, above line activate Sleep mode, but does not change mode to FSK
|
||||||
|
// as mode change is only allowed in sleep mode. Next line changes to FSK
|
||||||
|
writeRegister(REG_OP_MODE, FSK_SLEEP_MODE);
|
||||||
|
|
||||||
|
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE); // FSK standby mode
|
||||||
|
|
||||||
|
//writeRegister(REG_FIFO_THRESH, 0x80); // condition to start packet tx
|
||||||
|
//config1 = readRegister(REG_SYNC_CONFIG);
|
||||||
|
//config1 = config1 & B00111111;
|
||||||
|
//writeRegister(REG_SYNC_CONFIG,config1);
|
||||||
|
|
||||||
|
delay(100);
|
||||||
|
|
||||||
|
st0 = readRegister(REG_OP_MODE); // Reading config mode
|
||||||
|
if( st0 == FSK_STANDBY_MODE )
|
||||||
|
{ // FSK mode
|
||||||
|
state = 0;
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println(F("## FSK set with success ##"));
|
||||||
|
Serial.println();
|
||||||
|
#endif
|
||||||
|
} else { // LoRa mode
|
||||||
|
state = 1;
|
||||||
|
Serial.println( st0 );
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println(F("** There has been an error while setting FSK **"));
|
||||||
|
Serial.println();
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
return state;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/* Function: Sets FSK bitrate
|
||||||
|
* Returns: 0 for success, >0 in case of error
|
||||||
|
* Parameters: bps: requested bitrate
|
||||||
|
* (raw data rate, for Mancester encoding, the effective bitrate is bps/2)
|
||||||
|
*/
|
||||||
|
|
||||||
|
uint8_t SX1278FSK::setBitrate(float bps)
|
||||||
|
{
|
||||||
|
// TODO: Check if FSK mode is active
|
||||||
|
|
||||||
|
// check if bitrate is allowed allowed bitrate
|
||||||
|
if((bps < 1200) || (bps > 300000)) {
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
// set mode to FSK STANDBY
|
||||||
|
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE);
|
||||||
|
|
||||||
|
// set bit rate
|
||||||
|
uint16_t bitRate = (SX127X_CRYSTAL_FREQ * 1.0) / bps;
|
||||||
|
writeRegister(REG_BITRATE_MSB, (bitRate & 0xFF00) >> 8);
|
||||||
|
writeRegister(REG_BITRATE_LSB, (bitRate & 0x00FF));
|
||||||
|
|
||||||
|
// also set fractional part
|
||||||
|
uint16_t fracRate = (SX127X_CRYSTAL_FREQ * 16.0) / bps - bitRate * 16 + 0.5;
|
||||||
|
writeRegister(REG_BIT_RATE_FRAC, fracRate&0x0F);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
/* Function: Gets configured bitrate
|
||||||
|
* Returns bitrate in bit/second
|
||||||
|
*/
|
||||||
|
float SX1278FSK::getBitrate()
|
||||||
|
{
|
||||||
|
uint8_t fmsb = readRegister(REG_BITRATE_MSB);
|
||||||
|
uint8_t flsb = readRegister(REG_BITRATE_LSB);
|
||||||
|
uint8_t ffrac = readRegister(REG_BIT_RATE_FRAC) & 0x0F;
|
||||||
|
return SX127X_CRYSTAL_FREQ / ( (fmsb<<8) + flsb + ffrac / 16.0 );
|
||||||
|
}
|
||||||
|
|
||||||
|
//typedef struct rxbwset { float bw; uint8_t mant; uint8_t rxp; } st_rxbwsettings;
|
||||||
|
|
||||||
|
uint8_t SX1278FSK::setRxBandwidth(float bw)
|
||||||
|
{
|
||||||
|
// TODO: Check if in FSK mode
|
||||||
|
//
|
||||||
|
if(bw<2600 || bw>250000) { return 1; /* invalid */ }
|
||||||
|
|
||||||
|
uint8_t rxbwexp = 1;
|
||||||
|
bw = SX127X_CRYSTAL_FREQ / bw / 8;
|
||||||
|
while(bw>31) { rxbwexp++; bw/=2.0; }
|
||||||
|
uint8_t rxbwmant = bw<17?0 : bw<21? 1:2;
|
||||||
|
|
||||||
|
// set mode to FSK STANDBY
|
||||||
|
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE);
|
||||||
|
|
||||||
|
writeRegister(REG_RX_BW, rxbwexp | (rxbwmant<<3));
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
float SX1278FSK::getRxBandwidth()
|
||||||
|
{
|
||||||
|
uint8_t rxbw = readRegister(REG_RX_BW);
|
||||||
|
uint8_t rxbwexp = rxbw&0x07;
|
||||||
|
uint8_t rxbwmant = (rxbw>>3)&0x03;
|
||||||
|
rxbwmant = 16 + 4*rxbwmant;
|
||||||
|
return SX127X_CRYSTAL_FREQ / ( rxbwmant << (rxbwexp+2));
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t SX1278FSK::setAFCBandwidth(float bw)
|
||||||
|
{
|
||||||
|
// TODO: Check if in FSK mode
|
||||||
|
//
|
||||||
|
if(bw<2600 || bw>250000) { return 1; /* invalid */ }
|
||||||
|
|
||||||
|
uint8_t rxbwexp = 1;
|
||||||
|
bw = SX127X_CRYSTAL_FREQ / bw / 8;
|
||||||
|
while(bw>31) { rxbwexp++; bw/=2.0; }
|
||||||
|
uint8_t rxbwmant = bw<17?0 : bw<21? 1:2;
|
||||||
|
|
||||||
|
// set mode to FSK STANDBY
|
||||||
|
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE);
|
||||||
|
|
||||||
|
writeRegister(REG_AFC_BW, rxbwexp | (rxbwmant<<3));
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
float SX1278FSK::getAFCBandwidth()
|
||||||
|
{
|
||||||
|
uint8_t rxbw = readRegister(REG_AFC_BW);
|
||||||
|
uint8_t rxbwexp = rxbw&0x07;
|
||||||
|
uint8_t rxbwmant = (rxbw>>3)&0x03;
|
||||||
|
rxbwmant = 16 + 4*rxbwmant;
|
||||||
|
return SX127X_CRYSTAL_FREQ / ( rxbwmant << (rxbwexp+2));
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
uint8_t SX1278FSK::setFrequency(float freq) {
|
||||||
|
|
||||||
|
// set mode to FSK STANDBY
|
||||||
|
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE);
|
||||||
|
freq += sonde.config.freqofs; // manual frequency correction
|
||||||
|
|
||||||
|
uint32_t frf = freq * 1.0 * (1<<19) / SX127X_CRYSTAL_FREQ;
|
||||||
|
writeRegister(REG_FRF_MSB, (frf&0xff0000)>>16);
|
||||||
|
writeRegister(REG_FRF_MID, (frf&0x00ff00)>>8);
|
||||||
|
writeRegister(REG_FRF_LSB, (frf&0x0000ff));
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
float SX1278FSK::getFrequency() {
|
||||||
|
uint8_t fmsb = readRegister(REG_FRF_MSB);
|
||||||
|
uint8_t fmid = readRegister(REG_FRF_MID);
|
||||||
|
uint8_t flsb = readRegister(REG_FRF_LSB);
|
||||||
|
return ((fmsb<<16)|(fmid<<8)|flsb) * 1.0 / (1<<19) * SX127X_CRYSTAL_FREQ;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static int gaintab[]={-999,0,-6,-12,-24,-36,-48,-999};
|
||||||
|
int SX1278FSK::getLNAGain() {
|
||||||
|
int gain = (readRegister(REG_LNA)>>5)&0x07;
|
||||||
|
return gaintab[gain];
|
||||||
|
}
|
||||||
|
uint8_t SX1278FSK::setLNAGain(int gain) {
|
||||||
|
uint8_t g=1;
|
||||||
|
while(gain<gaintab[g] && g<6) {g++; }
|
||||||
|
writeRegister(REG_LNA, g<<5);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t SX1278FSK::getRxConf() {
|
||||||
|
return readRegister(REG_RX_CONFIG);
|
||||||
|
}
|
||||||
|
uint8_t SX1278FSK::setRxConf(uint8_t conf) {
|
||||||
|
writeRegister(REG_RX_CONFIG, conf);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t SX1278FSK::setSyncConf(uint8_t conf, int len, const uint8_t *syncpattern) {
|
||||||
|
int res=0;
|
||||||
|
writeRegister(REG_SYNC_CONFIG, conf);
|
||||||
|
if(len>8) return 1;
|
||||||
|
for(int i=0; i<len; i++) {
|
||||||
|
writeRegister(REG_SYNC_VALUE1+i, syncpattern[i]);
|
||||||
|
}
|
||||||
|
return res;
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t SX1278FSK::getSyncConf() {
|
||||||
|
return sx1278.readRegister(REG_SYNC_CONFIG);
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t SX1278FSK::setPreambleDetect(uint8_t conf) {
|
||||||
|
sx1278.writeRegister(REG_PREAMBLE_DETECT, conf);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t SX1278FSK::getPreambleDetect() {
|
||||||
|
return sx1278.readRegister(REG_PREAMBLE_DETECT);
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t SX1278FSK::setPacketConfig(uint8_t conf1, uint8_t conf2)
|
||||||
|
{
|
||||||
|
uint8_t ret=0;
|
||||||
|
sx1278.writeRegister(REG_PACKET_CONFIG1, conf1);
|
||||||
|
sx1278.writeRegister(REG_PACKET_CONFIG2, conf2);
|
||||||
|
return ret;
|
||||||
|
};
|
||||||
|
uint16_t SX1278FSK::getPacketConfig() {
|
||||||
|
uint8_t c1 = sx1278.readRegister(REG_PACKET_CONFIG1);
|
||||||
|
uint8_t c2 = sx1278.readRegister(REG_PACKET_CONFIG2);
|
||||||
|
return (c2<<8)|c1;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: Gets the preamble length from the module.
|
||||||
|
Returns: preamble length
|
||||||
|
*/
|
||||||
|
uint16_t SX1278FSK::getPreambleLength()
|
||||||
|
{
|
||||||
|
uint16_t p_length;
|
||||||
|
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println();
|
||||||
|
Serial.println(F("Starting 'getPreambleLength'"));
|
||||||
|
#endif
|
||||||
|
|
||||||
|
p_length = readRegister(REG_PREAMBLE_MSB_FSK);
|
||||||
|
p_length = (p_length<<8) | readRegister(REG_PREAMBLE_LSB_FSK);
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.print(F("## Preamble length configured is "));
|
||||||
|
Serial.print(p_length, HEX);
|
||||||
|
Serial.print(F(" ##"));
|
||||||
|
Serial.println();
|
||||||
|
#endif
|
||||||
|
return p_length;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: Sets the preamble length in the module
|
||||||
|
Returns: Integer that determines if there has been any error
|
||||||
|
state = 2 --> The command has not been executed
|
||||||
|
state = 1 --> There has been an error while executing the command
|
||||||
|
state = 0 --> The command has been executed with no errors
|
||||||
|
Parameters:
|
||||||
|
l: length value to set as preamble length.
|
||||||
|
*/
|
||||||
|
uint8_t SX1278FSK::setPreambleLength(uint16_t l)
|
||||||
|
{
|
||||||
|
byte st0;
|
||||||
|
int8_t state = 2;
|
||||||
|
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println();
|
||||||
|
Serial.println(F("Starting 'setPreambleLength'"));
|
||||||
|
#endif
|
||||||
|
|
||||||
|
st0 = readRegister(REG_OP_MODE); // Save the previous status
|
||||||
|
|
||||||
|
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE); // Set Standby mode to write in registers
|
||||||
|
// Storing MSB preamble length in FSK mode
|
||||||
|
writeRegister(REG_PREAMBLE_MSB_FSK, l>>8);
|
||||||
|
writeRegister(REG_PREAMBLE_LSB_FSK, l&0xFF);
|
||||||
|
|
||||||
|
state = 0;
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.print(F("## Preamble length "));
|
||||||
|
Serial.print(l, HEX);
|
||||||
|
Serial.println(F(" has been successfully set ##"));
|
||||||
|
Serial.println();
|
||||||
|
#endif
|
||||||
|
|
||||||
|
if(st0 != FSK_STANDBY_MODE) {
|
||||||
|
writeRegister(REG_OP_MODE, st0); // Getting back to previous status
|
||||||
|
}
|
||||||
|
return state;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: Gets the payload length from the module.
|
||||||
|
Returns: configured length; -1 on error
|
||||||
|
*/
|
||||||
|
int SX1278FSK::getPayloadLength()
|
||||||
|
{
|
||||||
|
int length;
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println();
|
||||||
|
Serial.println(F("Starting 'getPayloadLength'"));
|
||||||
|
#endif
|
||||||
|
length = readRegister(REG_PAYLOAD_LENGTH_FSK);
|
||||||
|
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.print(F("## Payload length configured is "));
|
||||||
|
Serial.print(length);
|
||||||
|
Serial.println(F(" ##"));
|
||||||
|
#endif
|
||||||
|
return length;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: Sets the payload length from the module.
|
||||||
|
Returns: 0 for ok, otherwise error
|
||||||
|
// TODO: Larger than 255 bytes?
|
||||||
|
*/
|
||||||
|
uint8_t SX1278FSK::setPayloadLength(int len)
|
||||||
|
{
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.print(F("Starting 'setPayloadLength'"));
|
||||||
|
Serial.println(len);
|
||||||
|
#endif
|
||||||
|
uint8_t conf2 = readRegister(REG_PACKET_CONFIG2);
|
||||||
|
conf2 = (conf2 & 0xF8) | ( (len>>8)&0x7 );
|
||||||
|
writeRegister(REG_PACKET_CONFIG2, conf2);
|
||||||
|
writeRegister(REG_PAYLOAD_LENGTH_FSK, len&0xFF);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: Gets the current value of RSSI.
|
||||||
|
Returns: RSSI value
|
||||||
|
*/
|
||||||
|
int16_t SX1278FSK::getRSSI()
|
||||||
|
{
|
||||||
|
int16_t RSSI;
|
||||||
|
//int rssi_mean = 0;
|
||||||
|
int total = 1;
|
||||||
|
|
||||||
|
/// FSK mode
|
||||||
|
// get mean value of RSSI
|
||||||
|
for(int i = 0; i < total; i++)
|
||||||
|
{
|
||||||
|
RSSI = readRegister(REG_RSSI_VALUE_FSK);
|
||||||
|
//rssi_mean += _RSSI;
|
||||||
|
}
|
||||||
|
//rssi_mean = rssi_mean / total;
|
||||||
|
//RSSI = rssi_mean;
|
||||||
|
|
||||||
|
#if (SX1278FSK_debug_mode > 0)
|
||||||
|
Serial.print(F("## RSSI value is "));
|
||||||
|
Serial.print(RSSI);
|
||||||
|
Serial.println(F(" ##"));
|
||||||
|
#endif
|
||||||
|
return RSSI;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: Gets the current value of FEI (frequency error indication)
|
||||||
|
Returns: FEI value in Hz
|
||||||
|
*/
|
||||||
|
int32_t SX1278FSK::getFEI()
|
||||||
|
{
|
||||||
|
int32_t FEI;
|
||||||
|
int16_t regval = (readRegister(REG_FEI_MSB)<<8) | readRegister(REG_FEI_LSB);
|
||||||
|
//Serial.printf("feireg: %04x\n", regval);
|
||||||
|
FEI = (int32_t)(regval * SX127X_FSTEP);
|
||||||
|
return FEI;
|
||||||
|
}
|
||||||
|
/*
|
||||||
|
Function: Gets the current value of AFC (automated frequency correction)
|
||||||
|
Returns: AFC value in Hz
|
||||||
|
*/
|
||||||
|
int32_t SX1278FSK::getAFC()
|
||||||
|
{
|
||||||
|
int32_t AFC;
|
||||||
|
int16_t regval = (readRegister(REG_AFC_MSB)<<8) | readRegister(REG_AFC_LSB);
|
||||||
|
//Serial.printf("afcreg: %04x\n", regval);
|
||||||
|
AFC = (int32_t)(regval * SX127X_FSTEP);
|
||||||
|
return AFC;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: Gets the current supply limit of the power amplifier, protecting battery chemistries.
|
||||||
|
Returns: Integer that determines if there has been any error
|
||||||
|
state = 2 --> The command has not been executed
|
||||||
|
state = 1 --> There has been an error while executing the command
|
||||||
|
state = 0 --> The command has been executed with no errors
|
||||||
|
Parameters:
|
||||||
|
rate: value to compute the maximum current supply. Maximum current is 45+5*'rate' [mA]
|
||||||
|
*/
|
||||||
|
int SX1278FSK::getMaxCurrent()
|
||||||
|
{
|
||||||
|
int value;
|
||||||
|
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println();
|
||||||
|
Serial.println(F("Starting 'getMaxCurrent'"));
|
||||||
|
#endif
|
||||||
|
|
||||||
|
value = readRegister(REG_OCP);
|
||||||
|
|
||||||
|
// extract only the OcpTrim value from the OCP register
|
||||||
|
value &= B00011111;
|
||||||
|
|
||||||
|
if( value <= 15 ) {
|
||||||
|
value = (45 + (5 * value));
|
||||||
|
} else if( value <= 27 ) {
|
||||||
|
value = (-30 + (10 * value));
|
||||||
|
} else {
|
||||||
|
value = 240;
|
||||||
|
}
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.print(F("## Maximum current supply configured is "));
|
||||||
|
Serial.print(value, DEC);
|
||||||
|
Serial.println(F(" mA ##"));
|
||||||
|
Serial.println();
|
||||||
|
#endif
|
||||||
|
return value;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: Limits the current supply of the power amplifier, protecting battery chemistries.
|
||||||
|
Returns: Integer that determines if there has been any error
|
||||||
|
state = 2 --> The command has not been executed
|
||||||
|
state = 1 --> There has been an error while executing the command
|
||||||
|
state = 0 --> The command has been executed with no errors
|
||||||
|
state = -1 --> Forbidden parameter value for this function
|
||||||
|
Parameters:
|
||||||
|
rate: value to compute the maximum current supply. Range: 0x00 to 0x1B. The
|
||||||
|
Maximum current is:
|
||||||
|
Imax = 45+5*OcpTrim [mA] if OcpTrim <= 15 (120 mA) /
|
||||||
|
Imax = -30+10*OcpTrim [mA] if 15 < OcpTrim <= 27 (130 to 240 mA)
|
||||||
|
Imax = 240mA for higher settings
|
||||||
|
*/
|
||||||
|
int8_t SX1278FSK::setMaxCurrent(uint8_t rate)
|
||||||
|
{
|
||||||
|
int8_t state = 2;
|
||||||
|
byte st0;
|
||||||
|
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println();
|
||||||
|
Serial.println(F("Starting 'setMaxCurrent'"));
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Maximum rate value = 0x1B, because maximum current supply = 240 mA
|
||||||
|
if (rate > 0x1B)
|
||||||
|
{
|
||||||
|
state = -1;
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.print(F("** Maximum current supply is 240 mA, "));
|
||||||
|
Serial.println(F("so maximum parameter value must be 27 (DEC) or 0x1B (HEX) **"));
|
||||||
|
Serial.println();
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
// Enable Over Current Protection
|
||||||
|
rate |= B00100000;
|
||||||
|
|
||||||
|
state = 1;
|
||||||
|
st0 = readRegister(REG_OP_MODE); // Save the previous status
|
||||||
|
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE); // Set FSK Standby mode to write in registers
|
||||||
|
writeRegister(REG_OCP, rate); // Modifying maximum current supply
|
||||||
|
if(st0 != FSK_STANDBY_MODE) {
|
||||||
|
writeRegister(REG_OP_MODE, st0); // Getting back to previous status
|
||||||
|
}
|
||||||
|
state = 0;
|
||||||
|
}
|
||||||
|
return state;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: Configures the module to receive information.
|
||||||
|
Returns: Integer that determines if there has been any error
|
||||||
|
state = 2 --> The command has not been executed
|
||||||
|
state = 1 --> There has been an error while executing the command
|
||||||
|
state = 0 --> The command has been executed with no errors
|
||||||
|
*/
|
||||||
|
uint8_t SX1278FSK::receive()
|
||||||
|
{
|
||||||
|
uint8_t state = 1;
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println();
|
||||||
|
Serial.println(F("Starting 'receive'"));
|
||||||
|
#endif
|
||||||
|
// TODO: Is there anything else to be done?
|
||||||
|
//
|
||||||
|
writeRegister(REG_OP_MODE, FSK_RX_MODE);
|
||||||
|
state = 0;
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println(F("## Receiving FSK mode activated with success ##"));
|
||||||
|
#endif
|
||||||
|
return state;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: Configures the module to receive a packet
|
||||||
|
Returns: Integer that determines if there has been any error
|
||||||
|
state = 2 --> The command has not been executed
|
||||||
|
state = 1 --> There has been an error while executing the command
|
||||||
|
state = 0 --> The command has been executed with no errors
|
||||||
|
Parameters:
|
||||||
|
wait: timeout in ms
|
||||||
|
data: memory where to place received data
|
||||||
|
*/
|
||||||
|
uint8_t SX1278FSK::receivePacketTimeout(uint32_t wait, byte *data)
|
||||||
|
{
|
||||||
|
int di=0;
|
||||||
|
uint8_t state = 2;
|
||||||
|
unsigned long previous;
|
||||||
|
byte value = 0x00;
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println();
|
||||||
|
Serial.println(F("Starting 'receivePacketTimeout'"));
|
||||||
|
#endif
|
||||||
|
// set RX mode
|
||||||
|
state = receive();
|
||||||
|
if(state != 0) { return state; }
|
||||||
|
|
||||||
|
#if (SX1278FSK_debug_mode > 0)
|
||||||
|
Serial.println(F("RX mode sucessfully activated"));
|
||||||
|
#endif
|
||||||
|
previous = millis();
|
||||||
|
/// FSK mode
|
||||||
|
value = readRegister(REG_IRQ_FLAGS2);
|
||||||
|
byte ready=0;
|
||||||
|
// while not yet done or FIFO not yet empty
|
||||||
|
while( (!ready || bitRead(value,6)==0) && (millis() - previous < wait) )
|
||||||
|
{
|
||||||
|
if( bitRead(value,2)==1 ) ready=1;
|
||||||
|
if( bitRead(value, 6) == 0 ) { // FIFO not empty
|
||||||
|
data[di++] = readRegister(REG_FIFO);
|
||||||
|
// It's a bit of a hack.... get RSSI and AFC (a) at beginning of packet and
|
||||||
|
// for RS41 after about 0.5 sec. It might be more logical to put this decoder-specific
|
||||||
|
// code into RS41.cpp instead of this file... (maybe TODO?)
|
||||||
|
|
||||||
|
if(di==1 || di==290 ) {
|
||||||
|
int rssi=getRSSI();
|
||||||
|
int afc=getAFC();
|
||||||
|
#if 0
|
||||||
|
Serial.printf("Test(%d): RSSI=%d", rxtask.currentSonde, rssi/2);
|
||||||
|
Serial.print("Test: AFC="); Serial.println(afc);
|
||||||
|
#endif
|
||||||
|
sonde.sondeList[rxtask.currentSonde].rssi = rssi;
|
||||||
|
sonde.sondeList[rxtask.currentSonde].afc = afc;
|
||||||
|
if(rxtask.receiveResult==0xFFFF)
|
||||||
|
rxtask.receiveResult = RX_UPDATERSSI;
|
||||||
|
//sonde.si()->rssi = rssi;
|
||||||
|
//sonde.si()->afc = afc;
|
||||||
|
}
|
||||||
|
if(di>520) {
|
||||||
|
// TODO
|
||||||
|
Serial.println("TOO MUCH DATA");
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
previous = millis(); // reset timeout after receiving data
|
||||||
|
} else {
|
||||||
|
delay(10);
|
||||||
|
}
|
||||||
|
value = readRegister(REG_IRQ_FLAGS2);
|
||||||
|
}
|
||||||
|
if( !ready || bitRead(value, 6)==0) {
|
||||||
|
#if 1&&(SX1278FSK_debug_mode > 0)
|
||||||
|
Serial.println(F("** The timeout has expired **"));
|
||||||
|
Serial.println();
|
||||||
|
#endif
|
||||||
|
sonde.si()->rssi = getRSSI();
|
||||||
|
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE); // Setting standby FSK mode
|
||||||
|
return 1; // TIMEOUT
|
||||||
|
}
|
||||||
|
|
||||||
|
#if (SX1278FSK_debug_mode > 0)
|
||||||
|
Serial.println(F("## Packet received:"));
|
||||||
|
for(unsigned int i = 0; i < di; i++)
|
||||||
|
{
|
||||||
|
Serial.print(data[i], HEX); // Printing payload
|
||||||
|
Serial.print("|");
|
||||||
|
}
|
||||||
|
Serial.println(F(" ##"));
|
||||||
|
#endif
|
||||||
|
state = 0;
|
||||||
|
// Initializing flags
|
||||||
|
clearIRQFlags();
|
||||||
|
|
||||||
|
return state;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
/*
|
||||||
|
Function: It gets the temperature from the measurement block module.
|
||||||
|
Returns: Integer that determines if there has been any error
|
||||||
|
state = 2 --> The command has not been executed
|
||||||
|
state = 1 --> There has been an error while executing the command
|
||||||
|
state = 0 --> The command has been executed with no errors
|
||||||
|
*/
|
||||||
|
uint8_t SX1278FSK::getTemp()
|
||||||
|
{
|
||||||
|
byte st0;
|
||||||
|
uint8_t state = 2;
|
||||||
|
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.println();
|
||||||
|
Serial.println(F("Starting 'getTemp'"));
|
||||||
|
#endif
|
||||||
|
|
||||||
|
st0 = readRegister(REG_OP_MODE); // Save the previous status
|
||||||
|
|
||||||
|
if( _modem == LORA )
|
||||||
|
{ // Allowing access to FSK registers while in LoRa standby mode
|
||||||
|
writeRegister(REG_OP_MODE, LORA_STANDBY_FSK_REGS_MODE);
|
||||||
|
}
|
||||||
|
|
||||||
|
state = 1;
|
||||||
|
// Saving temperature value
|
||||||
|
_temp = readRegister(REG_TEMP);
|
||||||
|
if( _temp & 0x80 ) // The SNR sign bit is 1
|
||||||
|
{
|
||||||
|
// Invert and divide by 4
|
||||||
|
_temp = ( ( ~_temp + 1 ) & 0xFF );
|
||||||
|
}
|
||||||
|
else
|
||||||
|
{
|
||||||
|
// Divide by 4
|
||||||
|
_temp = ( _temp & 0xFF );
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
#if (SX1278FSK_debug_mode > 1)
|
||||||
|
Serial.print(F("## Temperature is: "));
|
||||||
|
Serial.print(_temp);
|
||||||
|
Serial.println(F(" ##"));
|
||||||
|
Serial.println();
|
||||||
|
#endif
|
||||||
|
|
||||||
|
if( _modem == LORA )
|
||||||
|
{
|
||||||
|
writeRegister(REG_OP_MODE, st0); // Getting back to previous status
|
||||||
|
}
|
||||||
|
|
||||||
|
state = 0;
|
||||||
|
return state;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
Function: It prints the registers related to RX
|
||||||
|
Returns: Integer that determines if there has been any error
|
||||||
|
state = 2 --> The command has not been executed
|
||||||
|
state = 1 --> There has been an error while executing the command
|
||||||
|
state = 0 --> The command has been executed with no errors
|
||||||
|
*/
|
||||||
|
void SX1278FSK::showRxRegisters()
|
||||||
|
{
|
||||||
|
Serial.println(F("\n--- Show RX register ---"));
|
||||||
|
|
||||||
|
// variable
|
||||||
|
byte reg;
|
||||||
|
|
||||||
|
for(int i = 0x00; i < 0x80; i++)
|
||||||
|
{
|
||||||
|
reg = readRegister(i);
|
||||||
|
Serial.print(F("Reg 0x"));
|
||||||
|
Serial.print(i, HEX);
|
||||||
|
Serial.print(F(":"));
|
||||||
|
Serial.print(reg, HEX);
|
||||||
|
Serial.println();
|
||||||
|
delay(100);
|
||||||
|
}
|
||||||
|
|
||||||
|
Serial.println(F("------------------------"));
|
||||||
|
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
SX1278FSK sx1278 = SX1278FSK();
|
||||||
278
libraries/SX1278FSK/SX1278FSK.h
Executable file
278
libraries/SX1278FSK/SX1278FSK.h
Executable file
|
|
@ -0,0 +1,278 @@
|
||||||
|
/*
|
||||||
|
* Functions for using SX127x in FSK mode (mainly receive)
|
||||||
|
* Copyright (C) 2019 Hansi Reiser, dl9rdz
|
||||||
|
*
|
||||||
|
* Partially based on the SX1278 libraray for managing Semtech modules
|
||||||
|
* Copyright (C) 2015 Wireless Open Source
|
||||||
|
* http://wirelessopensource.com
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: LGPL-2.1+
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef SX1278FSK_h
|
||||||
|
#define SX1278FSK_h
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* Includes
|
||||||
|
******************************************************************************/
|
||||||
|
|
||||||
|
#include <stdlib.h>
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <Arduino.h>
|
||||||
|
#include <SPI.h>
|
||||||
|
|
||||||
|
#ifndef inttypes_h
|
||||||
|
#include <inttypes.h>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* Definitions & Declarations
|
||||||
|
*****************************************************************************/
|
||||||
|
|
||||||
|
#define SX127X_CRYSTAL_FREQ 32000000
|
||||||
|
#define SX127X_FSTEP (SX127X_CRYSTAL_FREQ*1.0/(1<<19))
|
||||||
|
|
||||||
|
#define SX1278FSK_debug_mode 0
|
||||||
|
|
||||||
|
#define SX1278_SS SS
|
||||||
|
|
||||||
|
//! MACROS //
|
||||||
|
#define bitRead(value, bit) (((value) >> (bit)) & 0x01) // read a bit
|
||||||
|
#define bitSet(value, bit) ((value) |= (1UL << (bit))) // set bit to '1'
|
||||||
|
#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) // set bit to '0'
|
||||||
|
|
||||||
|
|
||||||
|
//! REGISTERS //
|
||||||
|
// FSK Commun LORA
|
||||||
|
#define REG_FIFO 0x00
|
||||||
|
#define REG_OP_MODE 0x01
|
||||||
|
#define REG_BITRATE_MSB 0x02
|
||||||
|
#define REG_BITRATE_LSB 0x03
|
||||||
|
#define REG_FDEV_MSB 0x04
|
||||||
|
#define REG_FDEV_LSB 0x05
|
||||||
|
#define REG_FRF_MSB 0x06
|
||||||
|
#define REG_FRF_MID 0x07
|
||||||
|
#define REG_FRF_LSB 0x08
|
||||||
|
#define REG_PA_CONFIG 0x09
|
||||||
|
#define REG_PA_RAMP 0x0A
|
||||||
|
#define REG_OCP 0x0B
|
||||||
|
#define REG_LNA 0x0C
|
||||||
|
#define REG_RX_CONFIG 0x0D
|
||||||
|
#define REG_FIFO_ADDR_PTR 0x0D
|
||||||
|
#define REG_RSSI_CONFIG 0x0E
|
||||||
|
#define REG_FIFO_TX_BASE_ADDR 0x0E
|
||||||
|
#define REG_RSSI_COLLISION 0x0F
|
||||||
|
#define REG_FIFO_RX_BASE_ADDR 0x0F
|
||||||
|
#define REG_RSSI_THRESH 0x10
|
||||||
|
#define REG_FIFO_RX_CURRENT_ADDR 0x10
|
||||||
|
#define REG_RSSI_VALUE_FSK 0x11
|
||||||
|
#define REG_IRQ_FLAGS_MASK 0x11
|
||||||
|
#define REG_RX_BW 0x12
|
||||||
|
#define REG_IRQ_FLAGS 0x12
|
||||||
|
#define REG_AFC_BW 0x13
|
||||||
|
#define REG_RX_NB_BYTES 0x13
|
||||||
|
#define REG_OOK_PEAK 0x14
|
||||||
|
#define REG_RX_HEADER_CNT_VALUE_MSB 0x14
|
||||||
|
#define REG_OOK_FIX 0x15
|
||||||
|
#define REG_RX_HEADER_CNT_VALUE_LSB 0x15
|
||||||
|
#define REG_OOK_AVG 0x16
|
||||||
|
#define REG_RX_PACKET_CNT_VALUE_MSB 0x16
|
||||||
|
#define REG_RX_PACKET_CNT_VALUE_LSB 0x17
|
||||||
|
#define REG_MODEM_STAT 0x18
|
||||||
|
#define REG_PKT_SNR_VALUE 0x19
|
||||||
|
#define REG_AFC_FEI 0x1A
|
||||||
|
#define REG_PKT_RSSI_VALUE 0x1A
|
||||||
|
#define REG_AFC_MSB 0x1B
|
||||||
|
#define REG_RSSI_VALUE_LORA 0x1B
|
||||||
|
#define REG_AFC_LSB 0x1C
|
||||||
|
#define REG_HOP_CHANNEL 0x1C
|
||||||
|
#define REG_FEI_MSB 0x1D
|
||||||
|
#define REG_MODEM_CONFIG1 0x1D
|
||||||
|
#define REG_FEI_LSB 0x1E
|
||||||
|
#define REG_MODEM_CONFIG2 0x1E
|
||||||
|
#define REG_PREAMBLE_DETECT 0x1F
|
||||||
|
#define REG_SYMB_TIMEOUT_LSB 0x1F
|
||||||
|
#define REG_RX_TIMEOUT1 0x20
|
||||||
|
#define REG_PREAMBLE_MSB_LORA 0x20
|
||||||
|
#define REG_RX_TIMEOUT2 0x21
|
||||||
|
#define REG_PREAMBLE_LSB_LORA 0x21
|
||||||
|
#define REG_RX_TIMEOUT3 0x22
|
||||||
|
#define REG_PAYLOAD_LENGTH_LORA 0x22
|
||||||
|
#define REG_RX_DELAY 0x23
|
||||||
|
#define REG_MAX_PAYLOAD_LENGTH 0x23
|
||||||
|
#define REG_OSC 0x24
|
||||||
|
#define REG_HOP_PERIOD 0x24
|
||||||
|
#define REG_PREAMBLE_MSB_FSK 0x25
|
||||||
|
#define REG_FIFO_RX_BYTE_ADDR 0x25
|
||||||
|
#define REG_PREAMBLE_LSB_FSK 0x26
|
||||||
|
#define REG_MODEM_CONFIG3 0x26
|
||||||
|
#define REG_SYNC_CONFIG 0x27
|
||||||
|
#define REG_SYNC_VALUE1 0x28
|
||||||
|
#define REG_LORA_FEI_MSB 0x28
|
||||||
|
#define REG_SYNC_VALUE2 0x29
|
||||||
|
#define REG_LORA_FEI_MID 0x29
|
||||||
|
#define REG_SYNC_VALUE3 0x2A
|
||||||
|
#define REG_LORA_FEI_LSB 0x2A
|
||||||
|
#define REG_SYNC_VALUE4 0x2B
|
||||||
|
#define REG_SYNC_VALUE5 0x2C
|
||||||
|
#define REG_RSSI_WIDEBAND 0x2C
|
||||||
|
#define REG_SYNC_VALUE6 0x2D
|
||||||
|
#define REG_SYNC_VALUE7 0x2E
|
||||||
|
#define REG_SYNC_VALUE8 0x2F
|
||||||
|
#define REG_PACKET_CONFIG1 0x30
|
||||||
|
#define REG_PACKET_CONFIG2 0x31
|
||||||
|
#define REG_DETECT_OPTIMIZE 0x31
|
||||||
|
#define REG_PAYLOAD_LENGTH_FSK 0x32
|
||||||
|
#define REG_NODE_ADRS 0x33
|
||||||
|
#define REG_INVERT_IQ 0x33
|
||||||
|
#define REG_BROADCAST_ADRS 0x34
|
||||||
|
#define REG_FIFO_THRESH 0x35
|
||||||
|
#define REG_SEQ_CONFIG1 0x36
|
||||||
|
#define REG_SEQ_CONFIG2 0x37
|
||||||
|
#define REG_DETECTION_THRESHOLD 0x37
|
||||||
|
#define REG_TIMER_RESOL 0x38
|
||||||
|
#define REG_TIMER1_COEF 0x39
|
||||||
|
#define REG_SYNC_WORD 0x39
|
||||||
|
#define REG_TIMER2_COEF 0x3A
|
||||||
|
#define REG_IMAGE_CAL 0x3B
|
||||||
|
#define REG_TEMP 0x3C
|
||||||
|
#define REG_LOW_BAT 0x3D
|
||||||
|
#define REG_IRQ_FLAGS1 0x3E
|
||||||
|
#define REG_IRQ_FLAGS2 0x3F
|
||||||
|
#define REG_DIO_MAPPING1 0x40
|
||||||
|
#define REG_DIO_MAPPING2 0x41
|
||||||
|
#define REG_VERSION 0x42
|
||||||
|
#define REG_PLL_HOP 0x44
|
||||||
|
#define REG_TCXO 0x4B
|
||||||
|
#define REG_PA_DAC 0x4D
|
||||||
|
#define REG_FORMER_TEMP 0x5B
|
||||||
|
#define REG_BIT_RATE_FRAC 0x5D
|
||||||
|
#define REG_AGC_REF 0x61
|
||||||
|
#define REG_AGC_THRESH1 0x62
|
||||||
|
#define REG_AGC_THRESH2 0x63
|
||||||
|
#define REG_AGC_THRESH3 0x64
|
||||||
|
#define REG_PLL 0x70
|
||||||
|
|
||||||
|
|
||||||
|
//FSK MODES:
|
||||||
|
const uint8_t FSK_SLEEP_MODE = 0x00;
|
||||||
|
const uint8_t FSK_STANDBY_MODE = 0x01;
|
||||||
|
const uint8_t FSK_TX_MODE = 0x03;
|
||||||
|
const uint8_t FSK_RX_MODE = 0x05;
|
||||||
|
|
||||||
|
|
||||||
|
/******************************************************************************
|
||||||
|
* SX1278FSK Class
|
||||||
|
* Functions and variables for managing SX127x transceiver chips in FSK mode,
|
||||||
|
* mainly for receiving radiosonde transmissions
|
||||||
|
******************************************************************************/
|
||||||
|
class SX1278FSK
|
||||||
|
{
|
||||||
|
public:
|
||||||
|
// class constructor
|
||||||
|
SX1278FSK();
|
||||||
|
|
||||||
|
// Turn on SX1278 module (return 0 on sucess, 1 otherwise)
|
||||||
|
uint8_t ON();
|
||||||
|
|
||||||
|
// Turn off SX1278 module
|
||||||
|
void OFF();
|
||||||
|
|
||||||
|
// Read internal register
|
||||||
|
byte readRegister(byte address);
|
||||||
|
|
||||||
|
// Write internal register
|
||||||
|
void writeRegister(byte address, byte data);
|
||||||
|
|
||||||
|
// Clear IRQ flags
|
||||||
|
void clearIRQFlags();
|
||||||
|
|
||||||
|
// Activate FSK mode (return 0 on success, 1 otherwise)
|
||||||
|
uint8_t setFSK();
|
||||||
|
|
||||||
|
// Configures bitrate register (closest approximation to requested bitrate)
|
||||||
|
uint8_t setBitrate(float bps);
|
||||||
|
float getBitrate();
|
||||||
|
|
||||||
|
// Configures RX bandwidth (next largest supported bandwith if exact value not possible)
|
||||||
|
uint8_t setRxBandwidth(float bps);
|
||||||
|
float getRxBandwidth();
|
||||||
|
|
||||||
|
// Configures AFC bandwidth (next largest supported bandwith if exact value not possible)
|
||||||
|
uint8_t setAFCBandwidth(float bps);
|
||||||
|
float getAFCBandwidth();
|
||||||
|
|
||||||
|
// Configures RX frequency (closest approximation to requested frequency)
|
||||||
|
uint8_t setFrequency(float freq);
|
||||||
|
float getFrequency();
|
||||||
|
|
||||||
|
int getLNAGain();
|
||||||
|
uint8_t setLNAGain(int gain);
|
||||||
|
|
||||||
|
uint8_t getRxConf();
|
||||||
|
uint8_t setRxConf(uint8_t conf);
|
||||||
|
|
||||||
|
uint8_t setSyncConf(uint8_t conf, int len, const uint8_t *syncpattern);
|
||||||
|
uint8_t getSyncConf();
|
||||||
|
|
||||||
|
uint8_t setPreambleDetect(uint8_t conf);
|
||||||
|
uint8_t getPreambleDetect();
|
||||||
|
|
||||||
|
uint8_t setPacketConfig(uint8_t conf1, uint8_t conf2);
|
||||||
|
uint16_t getPacketConfig();
|
||||||
|
|
||||||
|
// Get configured preamble length (used for TX only?)
|
||||||
|
uint16_t getPreambleLength();
|
||||||
|
|
||||||
|
// Sets the preamble length.
|
||||||
|
uint8_t setPreambleLength(uint16_t l);
|
||||||
|
|
||||||
|
// Gets the payload length (expected length for receive)
|
||||||
|
int getPayloadLength();
|
||||||
|
uint8_t setPayloadLength(int len);
|
||||||
|
|
||||||
|
// Get current RSSI value
|
||||||
|
int16_t getRSSI();
|
||||||
|
|
||||||
|
// Get current FEI (frequency error indication) value
|
||||||
|
int32_t getFEI();
|
||||||
|
|
||||||
|
// Get current AFC value
|
||||||
|
int32_t getAFC();
|
||||||
|
|
||||||
|
// Get the maximum current supply by the module.
|
||||||
|
int getMaxCurrent();
|
||||||
|
|
||||||
|
// Set the maximum current supply by the module.
|
||||||
|
int8_t setMaxCurrent(uint8_t rate);
|
||||||
|
|
||||||
|
// Put the module in reception mode.
|
||||||
|
//return '0' on success, '1' otherwise
|
||||||
|
uint8_t receive();
|
||||||
|
|
||||||
|
// Receive a packet
|
||||||
|
uint8_t receivePacketTimeout(uint32_t wait, byte *data);
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
//! It gets the internal temperature of the module.
|
||||||
|
/*!
|
||||||
|
It stores in global '_temp' variable the module temperature.
|
||||||
|
\return '0' on success, '1' otherwise
|
||||||
|
*/
|
||||||
|
uint8_t getTemp();
|
||||||
|
|
||||||
|
//! It prints the registers related to RX via USB
|
||||||
|
/*!
|
||||||
|
* \return void
|
||||||
|
*/
|
||||||
|
void showRxRegisters();
|
||||||
|
#endif
|
||||||
|
|
||||||
|
};
|
||||||
|
|
||||||
|
extern SX1278FSK sx1278;
|
||||||
|
|
||||||
|
#endif
|
||||||
347
libraries/SondeLib/DFM.cpp
Executable file
347
libraries/SondeLib/DFM.cpp
Executable file
|
|
@ -0,0 +1,347 @@
|
||||||
|
|
||||||
|
/* DFM decoder functions */
|
||||||
|
#include "DFM.h"
|
||||||
|
#include "SX1278FSK.h"
|
||||||
|
#include "Sonde.h"
|
||||||
|
|
||||||
|
#define DFM_DEBUG 1
|
||||||
|
|
||||||
|
#if DFM_DEBUG
|
||||||
|
#define DFM_DBG(x) x
|
||||||
|
#else
|
||||||
|
#define DFM_DBG(x)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
int DFM::setup(float frequency, int inv)
|
||||||
|
{
|
||||||
|
inverse = inv;
|
||||||
|
#if DFM_DEBUG
|
||||||
|
Serial.printf("Setup sx1278 for DFM sonde (inv=%d)\n",inv);
|
||||||
|
#endif
|
||||||
|
if(sx1278.ON()!=0) {
|
||||||
|
DFM_DBG(Serial.println("Setting SX1278 power on FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
if(sx1278.setFSK()!=0) {
|
||||||
|
DFM_DBG(Serial.println("Setting FSM mode FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
if(sx1278.setBitrate(2500)!=0) {
|
||||||
|
DFM_DBG(Serial.println("Setting bitrate 2500bit/s FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
#if DFM_DEBUG
|
||||||
|
float br = sx1278.getBitrate();
|
||||||
|
Serial.print("Exact bitrate is ");
|
||||||
|
Serial.println(br);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
if(sx1278.setAFCBandwidth(sonde.config.dfm.agcbw)!=0) {
|
||||||
|
DFM_DBG(Serial.printf("Setting AFC bandwidth %d Hz FAILED", sonde.config.dfm.agcbw));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
if(sx1278.setRxBandwidth(sonde.config.dfm.rxbw)!=0) {
|
||||||
|
DFM_DBG(Serial.printf("Setting RX bandwidth to %d Hz FAILED", sonde.config.dfm.rxbw));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
// Enable auto-AFC, auto-AGC, RX Trigger by preamble
|
||||||
|
if(sx1278.setRxConf(0x1E)!=0) {
|
||||||
|
DFM_DBG(Serial.println("Setting RX Config FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
// Set autostart_RX to 01, preamble 0, SYNC detect==on, syncsize=3 (==4 byte
|
||||||
|
//char header[] = "0110.0101 0110.0110 1010.0101 1010.1010";
|
||||||
|
|
||||||
|
const char *SYNC=inverse?"\x9A\x99\x5A\x55":"\x65\x66\xA5\xAA";
|
||||||
|
if(sx1278.setSyncConf(0x53, 4, (const uint8_t *)SYNC)!=0) {
|
||||||
|
DFM_DBG(Serial.println("Setting SYNC Config FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
if(sx1278.setPreambleDetect(0xA8)!=0) {
|
||||||
|
DFM_DBG(Serial.println("Setting PreambleDetect FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Packet config 1: fixed len, mancecer, no crc, no address filter
|
||||||
|
// Packet config 2: packet mode, no home ctrl, no beackn, msb(packetlen)=0)
|
||||||
|
if(sx1278.setPacketConfig(0x28, 0x40)!=0) {
|
||||||
|
DFM_DBG(Serial.println("Setting Packet config FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
Serial.print("DFM: setting RX frequency to ");
|
||||||
|
Serial.println(frequency);
|
||||||
|
|
||||||
|
int retval = sx1278.setFrequency(frequency);
|
||||||
|
sx1278.clearIRQFlags();
|
||||||
|
DFM_DBG(Serial.println("Setting SX1278 config for DFM finished\n"); Serial.println());
|
||||||
|
return retval;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
#define bitpick(value,bitpos) (((value)>>(7-(bitpos)))&0x01)
|
||||||
|
// Input: str: packed data, MSB first
|
||||||
|
void DFM::deinterleave(uint8_t *str, int L, uint8_t *block) {
|
||||||
|
int i, j;
|
||||||
|
for (j = 0; j < B; j++) { // L = 7 (CFG), 13 (DAT1, DAT2)
|
||||||
|
for (i = 0; i < L; i++) {
|
||||||
|
block[B*i+j] = bitpick( str[(L*j+i)/8], (L*j+i)&7 )?0:1;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
uint32_t DFM::bits2val(const uint8_t *bits, int len) {
|
||||||
|
uint32_t val = 0;
|
||||||
|
for (int j = 0; j < len; j++) {
|
||||||
|
val |= (bits[j] << (len-1-j));
|
||||||
|
}
|
||||||
|
return val;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Error correction for hamming code
|
||||||
|
// returns 0: ok >0: 1 error was corrected -1: uncorrectable error
|
||||||
|
int DFM::check(uint8_t code[8]) {
|
||||||
|
int i, j;
|
||||||
|
uint32_t synval = 0;
|
||||||
|
uint8_t syndrom[4];
|
||||||
|
int ret=0;
|
||||||
|
|
||||||
|
for (i = 0; i < 4; i++) {
|
||||||
|
syndrom[i] = 0;
|
||||||
|
for (j = 0; j < 8; j++) {
|
||||||
|
syndrom[i] ^= H[i][j] & code[j];
|
||||||
|
}
|
||||||
|
}
|
||||||
|
synval = bits2val(syndrom, 4);
|
||||||
|
if (synval) {
|
||||||
|
ret = -1;
|
||||||
|
for (j = 0; j < 8; j++) { // 1-bit-error
|
||||||
|
if (synval == He[j]) { // reicht auf databits zu pruefen, d.h.
|
||||||
|
ret = j+1; // (systematischer Code) He[0..3]
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
else ret = 0;
|
||||||
|
if (ret > 0) code[ret-1] ^= 0x1;
|
||||||
|
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Extended (8,4) Hamming code
|
||||||
|
// Return number of corrected bits, -1 if uncorrectable error
|
||||||
|
int DFM::hamming(uint8_t *ham, int L, uint8_t *sym) {
|
||||||
|
int i, j;
|
||||||
|
int ret = 0; // DFM: length L = 7 or 13
|
||||||
|
for (i = 0; i < L; i++) { // L bytes (4bit data, 4bit parity)
|
||||||
|
if (use_ecc) {
|
||||||
|
int res = check(ham+8*i);
|
||||||
|
if(ret>=0 && res>=0) ret += res; else ret=-1;
|
||||||
|
}
|
||||||
|
// systematic Hamming code: copy bits 0..3
|
||||||
|
for (j = 0; j < 4; j++) {
|
||||||
|
sym[4*i+j] = ham[8*i+j];
|
||||||
|
}
|
||||||
|
}
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
DFM::DFM() {
|
||||||
|
}
|
||||||
|
|
||||||
|
void DFM::printRaw(const char *label, int len, int ret, const uint8_t *data)
|
||||||
|
{
|
||||||
|
Serial.print(label); Serial.print("(");
|
||||||
|
Serial.print(ret);
|
||||||
|
Serial.print("):");
|
||||||
|
int i;
|
||||||
|
for(i=0; i<len/2; i++) {
|
||||||
|
char str[10];
|
||||||
|
snprintf(str, 10, "%02X", data[i]);
|
||||||
|
Serial.print(str);
|
||||||
|
}
|
||||||
|
Serial.print(data[i]&0x0F, HEX);
|
||||||
|
Serial.print(" ");
|
||||||
|
}
|
||||||
|
|
||||||
|
void DFM::decodeCFG(uint8_t *cfg)
|
||||||
|
{
|
||||||
|
static int lowid, highid, idgood=0, type=0;
|
||||||
|
if((cfg[0]>>4)==0x06 && type==0) { // DFM-6 ID
|
||||||
|
lowid = ((cfg[0]&0x0F)<<20) | (cfg[1]<<12) | (cfg[2]<<4) | (cfg[3]&0x0f);
|
||||||
|
Serial.print("DFM-06 ID: "); Serial.print(lowid, HEX);
|
||||||
|
snprintf(sonde.si()->id, 10, "%x", lowid);
|
||||||
|
sonde.si()->validID = true;
|
||||||
|
}
|
||||||
|
if((cfg[0]>>4)==0x0A) { // DMF-9 ID
|
||||||
|
type=9;
|
||||||
|
if(cfg[3]==1) {
|
||||||
|
lowid = (cfg[1]<<8) | cfg[2];
|
||||||
|
idgood |= 1;
|
||||||
|
} else {
|
||||||
|
highid = (cfg[1]<<8) | cfg[2];
|
||||||
|
idgood |= 2;
|
||||||
|
}
|
||||||
|
if(idgood==3) {
|
||||||
|
uint32_t dfmid = (highid<<16) | lowid;
|
||||||
|
Serial.print("DFM-09 ID: "); Serial.print(dfmid);
|
||||||
|
snprintf(sonde.si()->ser, 10, "%d", dfmid);
|
||||||
|
// dxlAPRS sonde number (DF6 (why??) and 5 last digits of serial number as hex number
|
||||||
|
snprintf(sonde.si()->id, 9, "DF6%05X", dfmid&0xfffff);
|
||||||
|
sonde.si()->validID = true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
static int bitCount(int x) {
|
||||||
|
int m4 = 0x1 | (0x1<<8) | (0x1<<16) | (0x1<<24);
|
||||||
|
int m1 = 0xFF;
|
||||||
|
int s4 = (x&m4) + ((x>>1)&m4) + ((x>>2)&m4) + ((x>>3)&m4) + ((x>>4)&m4) + ((x>>5)&m4) + ((x>>6)&m4) + ((x>>7)&m4);
|
||||||
|
int s1 = (s4&m1) + ((s4>>8)&m1) + ((s4>>16)&m1) + ((s4>>24)&m1);
|
||||||
|
return s1;
|
||||||
|
}
|
||||||
|
|
||||||
|
static uint16_t MON[]={0,0,31,59,90,120,151,181,212,243,273,304,334};
|
||||||
|
|
||||||
|
void DFM::decodeDAT(uint8_t *dat)
|
||||||
|
{
|
||||||
|
Serial.print(" DAT["); Serial.print(dat[6]); Serial.print("]: ");
|
||||||
|
switch(dat[6]) {
|
||||||
|
case 0:
|
||||||
|
Serial.print("Packet counter: "); Serial.print(dat[3]);
|
||||||
|
sonde.si()->frame = dat[3];
|
||||||
|
break;
|
||||||
|
case 1:
|
||||||
|
{
|
||||||
|
int val = (((uint16_t)dat[4])<<8) + (uint16_t)dat[5];
|
||||||
|
Serial.print("UTC-msec: "); Serial.print(val);
|
||||||
|
sonde.si()->sec = val/1000;
|
||||||
|
uint32_t tmp = ((uint32_t)dat[0]<<24) + ((uint32_t)dat[1]<<16) + ((uint32_t)dat[2]<<8) + ((uint32_t)dat[3]);
|
||||||
|
sonde.si()->sats = bitCount(tmp); // maybe!?!?!?
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case 2:
|
||||||
|
{
|
||||||
|
float lat, vh;
|
||||||
|
lat = ((uint32_t)dat[0]<<24) + ((uint32_t)dat[1]<<16) + ((uint32_t)dat[2]<<8) + ((uint32_t)dat[3]);
|
||||||
|
vh = ((uint16_t)dat[4]<<8) + dat[5];
|
||||||
|
Serial.print("GPS-lat: "); Serial.print(lat*0.0000001);
|
||||||
|
Serial.print(", hor-V: "); Serial.print(vh*0.01);
|
||||||
|
sonde.si()->lat = lat*0.0000001;
|
||||||
|
sonde.si()->hs = vh*0.01;
|
||||||
|
sonde.si()->validPos |= 0x11;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case 3:
|
||||||
|
{
|
||||||
|
float lon, dir;
|
||||||
|
lon = ((uint32_t)dat[0]<<24) + ((uint32_t)dat[1]<<16) + ((uint32_t)dat[2]<<8) + (uint32_t)dat[3];
|
||||||
|
dir = ((uint16_t)dat[4]<<8) + dat[5];
|
||||||
|
Serial.print("GPS-lon: "); Serial.print(lon*0.0000001);
|
||||||
|
Serial.print(", dir: "); Serial.print(dir*0.01);
|
||||||
|
sonde.si()->lon = lon*0.0000001;
|
||||||
|
sonde.si()->dir = dir*0.01;
|
||||||
|
sonde.si()->validPos |= 0x42;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case 4:
|
||||||
|
{
|
||||||
|
float alt, vv;
|
||||||
|
alt = ((uint32_t)dat[0]<<24) + ((uint32_t)dat[1]<<16) + ((uint32_t)dat[2]<<8) + dat[3];
|
||||||
|
vv = (int16_t)( ((int16_t)dat[4]<<8) | dat[5] );
|
||||||
|
Serial.print("GPS-height: "); Serial.print(alt*0.01);
|
||||||
|
Serial.print(", vv: "); Serial.print(vv*0.01);
|
||||||
|
sonde.si()->alt = alt*0.01;
|
||||||
|
sonde.si()->vs = vv*0.01;
|
||||||
|
sonde.si()->validPos |= 0x0C;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case 8:
|
||||||
|
{
|
||||||
|
int y = (dat[0]<<4) + (dat[1]>>4);
|
||||||
|
int m = dat[1]&0x0F;
|
||||||
|
int d = dat[2]>>3;
|
||||||
|
int h = ((dat[2]&0x07)<<2) + (dat[3]>>6);
|
||||||
|
int mi = (dat[3]&0x3F);
|
||||||
|
char buf[100];
|
||||||
|
snprintf(buf, 100, "%04d-%02d-%02d %02d:%02dz", y, m, d, h, mi);
|
||||||
|
Serial.print("Date: "); Serial.print(buf);
|
||||||
|
// convert to unix time
|
||||||
|
int tt = (y-1970)*365 + (y-1969)/4; // days since 1970
|
||||||
|
if(m<=12) { tt += MON[m]; if((y%4)==0 && m>2) tt++; }
|
||||||
|
tt = (tt+d-1)*(60*60*24) + h*3600 + mi*60;
|
||||||
|
sonde.si()->time = tt;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
Serial.print("(?)");
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void DFM::bitsToBytes(uint8_t *bits, uint8_t *bytes, int len)
|
||||||
|
{
|
||||||
|
int i;
|
||||||
|
for(i=0; i<len*4; i++) {
|
||||||
|
//Serial.print(bits[i]?"1":"0");
|
||||||
|
bytes[i/8] = (bytes[i/8]<<1) | (bits[i]?1:0);
|
||||||
|
}
|
||||||
|
bytes[(i-1)/8] &= 0x0F;
|
||||||
|
}
|
||||||
|
|
||||||
|
int DFM::receive() {
|
||||||
|
byte data[1000]; // pending data from previous mode may write more than 33 bytes. TODO.
|
||||||
|
for(int i=0; i<2; i++) {
|
||||||
|
sx1278.setPayloadLength(33); // Expect 33 bytes (7+13+13 bytes)
|
||||||
|
|
||||||
|
sx1278.writeRegister(REG_OP_MODE, FSK_RX_MODE);
|
||||||
|
int e = sx1278.receivePacketTimeout(1000, data);
|
||||||
|
if(e) { return RX_TIMEOUT; } //if timeout... return 1
|
||||||
|
|
||||||
|
Serial.printf("inverse is %d\b", inverse);
|
||||||
|
if(!inverse) { for(int i=0; i<33; i++) { data[i]^=0xFF; } }
|
||||||
|
deinterleave(data, 7, hamming_conf);
|
||||||
|
deinterleave(data+7, 13, hamming_dat1);
|
||||||
|
deinterleave(data+20, 13, hamming_dat2);
|
||||||
|
|
||||||
|
int ret0 = hamming(hamming_conf, 7, block_conf);
|
||||||
|
int ret1 = hamming(hamming_dat1, 13, block_dat1);
|
||||||
|
int ret2 = hamming(hamming_dat2, 13, block_dat2);
|
||||||
|
|
||||||
|
byte byte_conf[4], byte_dat1[7], byte_dat2[7];
|
||||||
|
bitsToBytes(block_conf, byte_conf, 7);
|
||||||
|
bitsToBytes(block_dat1, byte_dat1, 13);
|
||||||
|
bitsToBytes(block_dat2, byte_dat2, 13);
|
||||||
|
|
||||||
|
printRaw("CFG", 7, ret0, byte_conf);
|
||||||
|
printRaw("DAT", 13, ret1, byte_dat1);
|
||||||
|
printRaw("DAT", 13, ret2, byte_dat2);
|
||||||
|
decodeCFG(byte_conf);
|
||||||
|
decodeDAT(byte_dat1);
|
||||||
|
decodeDAT(byte_dat2);
|
||||||
|
}
|
||||||
|
return RX_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
// moved to a single function in Sonde(). This function can be used for additional
|
||||||
|
// processing here, that takes too long for doing in the RX task loop
|
||||||
|
int DFM::waitRXcomplete() {
|
||||||
|
#if 0
|
||||||
|
int res=0;
|
||||||
|
uint32_t t0 = millis();
|
||||||
|
while( rxtask.receiveResult < 0 && millis()-t0 < 2000) { delay(50); }
|
||||||
|
|
||||||
|
if( rxtask.receiveResult<0 || rxtask.receiveResult==RX_TIMEOUT) {
|
||||||
|
res = RX_TIMEOUT;
|
||||||
|
} else if ( rxtask.receiveResult ==0) {
|
||||||
|
res = RX_OK;
|
||||||
|
} else {
|
||||||
|
res = RX_ERROR;
|
||||||
|
}
|
||||||
|
rxtask.receiveResult = -1;
|
||||||
|
Serial.printf("waitRXcomplete returning %d\n", res);
|
||||||
|
return res;
|
||||||
|
#endif
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
DFM dfm = DFM();
|
||||||
67
libraries/SondeLib/DFM.h
Executable file
67
libraries/SondeLib/DFM.h
Executable file
|
|
@ -0,0 +1,67 @@
|
||||||
|
/*
|
||||||
|
* DFM.h
|
||||||
|
* Functions for decoding DFM sondes with SX127x chips
|
||||||
|
* Copyright (C) 2019 Hansi Reiser, dl9rdz
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef DFM_h
|
||||||
|
#define DFM_h
|
||||||
|
|
||||||
|
#include <stdlib.h>
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <Arduino.h>
|
||||||
|
#ifndef inttypes_h
|
||||||
|
#include <inttypes.h>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define DFM_NORMAL 0
|
||||||
|
#define DFM_INVERSE 1
|
||||||
|
|
||||||
|
/* Main class */
|
||||||
|
class DFM
|
||||||
|
{
|
||||||
|
private:
|
||||||
|
int inverse=0;
|
||||||
|
|
||||||
|
void deinterleave(uint8_t *str, int L, uint8_t *block);
|
||||||
|
uint32_t bits2val(const uint8_t *bits, int len);
|
||||||
|
int check(uint8_t code[8]);
|
||||||
|
int hamming(uint8_t *ham, int L, uint8_t *sym);
|
||||||
|
void printRaw(const char *prefix, int len, int ret, const uint8_t* data);
|
||||||
|
void decodeCFG(uint8_t *cfg);
|
||||||
|
void decodeDAT(uint8_t *dat);
|
||||||
|
void bitsToBytes(uint8_t *bits, uint8_t *bytes, int len);
|
||||||
|
|
||||||
|
#define B 8
|
||||||
|
#define S 4
|
||||||
|
uint8_t hamming_conf[ 7*B]; // 7*8=56
|
||||||
|
uint8_t hamming_dat1[13*B]; // 13*8=104
|
||||||
|
uint8_t hamming_dat2[13*B];
|
||||||
|
|
||||||
|
uint8_t block_conf[ 7*S]; // 7*4=28
|
||||||
|
uint8_t block_dat1[13*S]; // 13*4=52
|
||||||
|
uint8_t block_dat2[13*S];
|
||||||
|
|
||||||
|
uint8_t H[4][8] = // extended Hamming(8,4) particy check matrix
|
||||||
|
{{ 0, 1, 1, 1, 1, 0, 0, 0},
|
||||||
|
{ 1, 0, 1, 1, 0, 1, 0, 0},
|
||||||
|
{ 1, 1, 0, 1, 0, 0, 1, 0},
|
||||||
|
{ 1, 1, 1, 0, 0, 0, 0, 1}};
|
||||||
|
uint8_t He[8] = { 0x7, 0xB, 0xD, 0xE, 0x8, 0x4, 0x2, 0x1}; // Spalten von H:
|
||||||
|
// 1-bit-error-Syndrome
|
||||||
|
|
||||||
|
public:
|
||||||
|
DFM();
|
||||||
|
// main decoder API
|
||||||
|
int setup(float frequency, int inverse);
|
||||||
|
int receive();
|
||||||
|
int waitRXcomplete();
|
||||||
|
|
||||||
|
int use_ecc = 1;
|
||||||
|
};
|
||||||
|
|
||||||
|
extern DFM dfm;
|
||||||
|
|
||||||
|
#endif
|
||||||
367
libraries/SondeLib/DefaultFonts.c
Executable file
367
libraries/SondeLib/DefaultFonts.c
Executable file
|
|
@ -0,0 +1,367 @@
|
||||||
|
// SPDX-License-Identifier: GPL-3.0
|
||||||
|
// original source: https://github.com/Nkawu/TFT_22_ILI9225
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef __AVR__
|
||||||
|
#include <avr/pgmspace.h>
|
||||||
|
#elif defined(ESP8266) || defined(ESP32)
|
||||||
|
#include <pgmspace.h>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(ARDUINO_ARCH_SAM) || defined(ARDUINO_ARCH_SAMD) || defined(ARDUINO_ARCH_STM32) || defined(ARDUINO_ARCH_STM32F1) || defined(STM32F1) || defined(ESP32)
|
||||||
|
#define PROGMEM
|
||||||
|
#define fontdatatype const char
|
||||||
|
#else
|
||||||
|
#define fontdatatype const uint8_t
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//Font Generated by MikroElektronika GLCD Font Creator 1.2.0.0
|
||||||
|
//MikroElektronika 2011
|
||||||
|
//http://www.mikroe.com
|
||||||
|
|
||||||
|
//GLCD FontName : Terminal6x8
|
||||||
|
//GLCD FontSize : 6 x 8
|
||||||
|
|
||||||
|
fontdatatype Terminal6x8[] PROGMEM = {
|
||||||
|
0x06, 0x08, 0x20, 0x60,
|
||||||
|
0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char
|
||||||
|
0x05, 0x00, 0x00, 0x06, 0x5F, 0x06, 0x00, // Code for char !
|
||||||
|
0x06, 0x00, 0x07, 0x03, 0x00, 0x07, 0x03, // Code for char "
|
||||||
|
0x06, 0x00, 0x24, 0x7E, 0x24, 0x7E, 0x24, // Code for char #
|
||||||
|
0x05, 0x00, 0x24, 0x2B, 0x6A, 0x12, 0x00, // Code for char $
|
||||||
|
0x06, 0x00, 0x63, 0x13, 0x08, 0x64, 0x63, // Code for char %
|
||||||
|
0x06, 0x00, 0x36, 0x49, 0x56, 0x20, 0x50, // Code for char &
|
||||||
|
0x04, 0x00, 0x00, 0x07, 0x03, 0x00, 0x00, // Code for char '
|
||||||
|
0x04, 0x00, 0x00, 0x3E, 0x41, 0x00, 0x00, // Code for char (
|
||||||
|
0x04, 0x00, 0x00, 0x41, 0x3E, 0x00, 0x00, // Code for char )
|
||||||
|
0x06, 0x00, 0x08, 0x3E, 0x1C, 0x3E, 0x08, // Code for char *
|
||||||
|
0x06, 0x00, 0x08, 0x08, 0x3E, 0x08, 0x08, // Code for char +
|
||||||
|
0x04, 0x00, 0x00, 0xE0, 0x60, 0x00, 0x00, // Code for char ,
|
||||||
|
0x06, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, // Code for char -
|
||||||
|
0x04, 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, // Code for char .
|
||||||
|
0x06, 0x00, 0x20, 0x10, 0x08, 0x04, 0x02, // Code for char /
|
||||||
|
0x06, 0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E, // Code for char 0
|
||||||
|
0x05, 0x00, 0x00, 0x42, 0x7F, 0x40, 0x00, // Code for char 1
|
||||||
|
0x06, 0x00, 0x62, 0x51, 0x49, 0x49, 0x46, // Code for char 2
|
||||||
|
0x06, 0x00, 0x22, 0x49, 0x49, 0x49, 0x36, // Code for char 3
|
||||||
|
0x06, 0x00, 0x18, 0x14, 0x12, 0x7F, 0x10, // Code for char 4
|
||||||
|
0x06, 0x00, 0x2F, 0x49, 0x49, 0x49, 0x31, // Code for char 5
|
||||||
|
0x06, 0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30, // Code for char 6
|
||||||
|
0x06, 0x00, 0x01, 0x71, 0x09, 0x05, 0x03, // Code for char 7
|
||||||
|
0x06, 0x00, 0x36, 0x49, 0x49, 0x49, 0x36, // Code for char 8
|
||||||
|
0x06, 0x00, 0x06, 0x49, 0x49, 0x29, 0x1E, // Code for char 9
|
||||||
|
0x04, 0x00, 0x00, 0x6C, 0x6C, 0x00, 0x00, // Code for char :
|
||||||
|
0x04, 0x00, 0x00, 0xEC, 0x6C, 0x00, 0x00, // Code for char ;
|
||||||
|
0x05, 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, // Code for char <
|
||||||
|
0x06, 0x00, 0x24, 0x24, 0x24, 0x24, 0x24, // Code for char =
|
||||||
|
0x06, 0x00, 0x00, 0x41, 0x22, 0x14, 0x08, // Code for char >
|
||||||
|
0x06, 0x00, 0x02, 0x01, 0x59, 0x09, 0x06, // Code for char ?
|
||||||
|
0x06, 0x00, 0x3E, 0x41, 0x5D, 0x55, 0x1E, // Code for char @
|
||||||
|
0x06, 0x00, 0x7E, 0x11, 0x11, 0x11, 0x7E, // Code for char A
|
||||||
|
0x06, 0x00, 0x7F, 0x49, 0x49, 0x49, 0x36, // Code for char B
|
||||||
|
0x06, 0x00, 0x3E, 0x41, 0x41, 0x41, 0x22, // Code for char C
|
||||||
|
0x06, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x3E, // Code for char D
|
||||||
|
0x06, 0x00, 0x7F, 0x49, 0x49, 0x49, 0x41, // Code for char E
|
||||||
|
0x06, 0x00, 0x7F, 0x09, 0x09, 0x09, 0x01, // Code for char F
|
||||||
|
0x06, 0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A, // Code for char G
|
||||||
|
0x06, 0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F, // Code for char H
|
||||||
|
0x05, 0x00, 0x00, 0x41, 0x7F, 0x41, 0x00, // Code for char I
|
||||||
|
0x06, 0x00, 0x30, 0x40, 0x40, 0x40, 0x3F, // Code for char J
|
||||||
|
0x06, 0x00, 0x7F, 0x08, 0x14, 0x22, 0x41, // Code for char K
|
||||||
|
0x06, 0x00, 0x7F, 0x40, 0x40, 0x40, 0x40, // Code for char L
|
||||||
|
0x06, 0x00, 0x7F, 0x02, 0x04, 0x02, 0x7F, // Code for char M
|
||||||
|
0x06, 0x00, 0x7F, 0x02, 0x04, 0x08, 0x7F, // Code for char N
|
||||||
|
0x06, 0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E, // Code for char O
|
||||||
|
0x06, 0x00, 0x7F, 0x09, 0x09, 0x09, 0x06, // Code for char P
|
||||||
|
0x06, 0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E, // Code for char Q
|
||||||
|
0x06, 0x00, 0x7F, 0x09, 0x09, 0x19, 0x66, // Code for char R
|
||||||
|
0x06, 0x00, 0x26, 0x49, 0x49, 0x49, 0x32, // Code for char S
|
||||||
|
0x06, 0x00, 0x01, 0x01, 0x7F, 0x01, 0x01, // Code for char T
|
||||||
|
0x06, 0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F, // Code for char U
|
||||||
|
0x06, 0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F, // Code for char V
|
||||||
|
0x06, 0x00, 0x3F, 0x40, 0x3C, 0x40, 0x3F, // Code for char W
|
||||||
|
0x06, 0x00, 0x63, 0x14, 0x08, 0x14, 0x63, // Code for char X
|
||||||
|
0x06, 0x00, 0x07, 0x08, 0x70, 0x08, 0x07, // Code for char Y
|
||||||
|
0x05, 0x00, 0x71, 0x49, 0x45, 0x43, 0x00, // Code for char Z
|
||||||
|
0x05, 0x00, 0x00, 0x7F, 0x41, 0x41, 0x00, // Code for char [
|
||||||
|
0x06, 0x00, 0x02, 0x04, 0x08, 0x10, 0x20, // Code for char BackSlash
|
||||||
|
0x05, 0x00, 0x00, 0x41, 0x41, 0x7F, 0x00, // Code for char ]
|
||||||
|
0x06, 0x00, 0x04, 0x02, 0x01, 0x02, 0x04, // Code for char ^
|
||||||
|
0x06, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, // Code for char _
|
||||||
|
0x04, 0x00, 0x00, 0x03, 0x07, 0x00, 0x00, // Code for char `
|
||||||
|
0x06, 0x00, 0x20, 0x54, 0x54, 0x54, 0x78, // Code for char a
|
||||||
|
0x06, 0x00, 0x7F, 0x44, 0x44, 0x44, 0x38, // Code for char b
|
||||||
|
0x06, 0x00, 0x38, 0x44, 0x44, 0x44, 0x28, // Code for char c
|
||||||
|
0x06, 0x00, 0x38, 0x44, 0x44, 0x44, 0x7F, // Code for char d
|
||||||
|
0x06, 0x00, 0x38, 0x54, 0x54, 0x54, 0x08, // Code for char e
|
||||||
|
0x05, 0x00, 0x08, 0x7E, 0x09, 0x09, 0x00, // Code for char f
|
||||||
|
0x06, 0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C, // Code for char g
|
||||||
|
0x05, 0x00, 0x7F, 0x04, 0x04, 0x78, 0x00, // Code for char h
|
||||||
|
0x05, 0x00, 0x00, 0x00, 0x7D, 0x40, 0x00, // Code for char i
|
||||||
|
0x05, 0x00, 0x40, 0x80, 0x84, 0x7D, 0x00, // Code for char j
|
||||||
|
0x05, 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00, // Code for char k
|
||||||
|
0x05, 0x00, 0x00, 0x00, 0x7F, 0x40, 0x00, // Code for char l
|
||||||
|
0x06, 0x00, 0x7C, 0x04, 0x18, 0x04, 0x78, // Code for char m
|
||||||
|
0x05, 0x00, 0x7C, 0x04, 0x04, 0x78, 0x00, // Code for char n
|
||||||
|
0x06, 0x00, 0x38, 0x44, 0x44, 0x44, 0x38, // Code for char o
|
||||||
|
0x06, 0x00, 0xFC, 0x44, 0x44, 0x44, 0x38, // Code for char p
|
||||||
|
0x06, 0x00, 0x38, 0x44, 0x44, 0x44, 0xFC, // Code for char q
|
||||||
|
0x06, 0x00, 0x44, 0x78, 0x44, 0x04, 0x08, // Code for char r
|
||||||
|
0x06, 0x00, 0x08, 0x54, 0x54, 0x54, 0x20, // Code for char s
|
||||||
|
0x05, 0x00, 0x04, 0x3E, 0x44, 0x24, 0x00, // Code for char t
|
||||||
|
0x05, 0x00, 0x3C, 0x40, 0x20, 0x7C, 0x00, // Code for char u
|
||||||
|
0x06, 0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C, // Code for char v
|
||||||
|
0x06, 0x00, 0x3C, 0x60, 0x30, 0x60, 0x3C, // Code for char w
|
||||||
|
0x05, 0x00, 0x6C, 0x10, 0x10, 0x6C, 0x00, // Code for char x
|
||||||
|
0x05, 0x00, 0x9C, 0xA0, 0x60, 0x3C, 0x00, // Code for char y
|
||||||
|
0x05, 0x00, 0x64, 0x54, 0x54, 0x4C, 0x00, // Code for char z
|
||||||
|
0x05, 0x00, 0x08, 0x3E, 0x41, 0x41, 0x00, // Code for char {
|
||||||
|
0x04, 0x00, 0x00, 0x00, 0x77, 0x00, 0x00, // Code for char |
|
||||||
|
0x06, 0x00, 0x00, 0x41, 0x41, 0x3E, 0x08, // Code for char }
|
||||||
|
0x05, 0x00, 0x02, 0x01, 0x02, 0x01, 0x00, // Code for char ~
|
||||||
|
0x06, 0x00, 0x3C, 0x26, 0x23, 0x26, 0x3C // Code for char
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
//Font Generated by MikroElektronika GLCD Font Creator 1.2.0.0
|
||||||
|
//MikroElektronika 2011
|
||||||
|
//http://www.mikroe.com
|
||||||
|
|
||||||
|
//GLCD FontName : Terminal11x16
|
||||||
|
//GLCD FontSize : 11 x 16
|
||||||
|
|
||||||
|
fontdatatype Terminal11x16[] PROGMEM = {
|
||||||
|
0x0B, 0x10, 0x20, 0x60,
|
||||||
|
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char
|
||||||
|
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xFF, 0x33, 0xFF, 0x33, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char !
|
||||||
|
0x08, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char "
|
||||||
|
0x0B, 0x00, 0x02, 0x10, 0x1E, 0x90, 0x1F, 0xF0, 0x03, 0x7E, 0x02, 0x1E, 0x1E, 0x90, 0x1F, 0xF0, 0x03, 0x7E, 0x02, 0x1E, 0x00, 0x10, 0x00, // Code for char #
|
||||||
|
0x09, 0x00, 0x00, 0x78, 0x04, 0xFC, 0x0C, 0xCC, 0x0C, 0xFF, 0x3F, 0xFF, 0x3F, 0xCC, 0x0C, 0xCC, 0x0F, 0x88, 0x07, 0x00, 0x00, 0x00, 0x00, // Code for char $
|
||||||
|
0x0B, 0x00, 0x30, 0x38, 0x38, 0x38, 0x1C, 0x38, 0x0E, 0x00, 0x07, 0x80, 0x03, 0xC0, 0x01, 0xE0, 0x38, 0x70, 0x38, 0x38, 0x38, 0x1C, 0x00, // Code for char %
|
||||||
|
0x0A, 0x00, 0x00, 0x00, 0x1F, 0xB8, 0x3F, 0xFC, 0x31, 0xC6, 0x21, 0xE2, 0x37, 0x3E, 0x1E, 0x1C, 0x1C, 0x00, 0x36, 0x00, 0x22, 0x00, 0x00, // Code for char &
|
||||||
|
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x27, 0x00, 0x3F, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char '
|
||||||
|
0x08, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x03, 0xFC, 0x0F, 0xFE, 0x1F, 0x07, 0x38, 0x01, 0x20, 0x01, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char (
|
||||||
|
0x08, 0x00, 0x00, 0x00, 0x00, 0x01, 0x20, 0x01, 0x20, 0x07, 0x38, 0xFE, 0x1F, 0xFC, 0x0F, 0xF0, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char )
|
||||||
|
0x09, 0x00, 0x00, 0x98, 0x0C, 0xB8, 0x0E, 0xE0, 0x03, 0xF8, 0x0F, 0xF8, 0x0F, 0xE0, 0x03, 0xB8, 0x0E, 0x98, 0x0C, 0x00, 0x00, 0x00, 0x00, // Code for char *
|
||||||
|
0x09, 0x00, 0x00, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0xF0, 0x0F, 0xF0, 0x0F, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, // Code for char +
|
||||||
|
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xB8, 0x00, 0xF8, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char ,
|
||||||
|
0x09, 0x00, 0x00, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, // Code for char -
|
||||||
|
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x38, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char .
|
||||||
|
0x0B, 0x00, 0x18, 0x00, 0x1C, 0x00, 0x0E, 0x00, 0x07, 0x80, 0x03, 0xC0, 0x01, 0xE0, 0x00, 0x70, 0x00, 0x38, 0x00, 0x1C, 0x00, 0x0E, 0x00, // Code for char /
|
||||||
|
0x0B, 0xF8, 0x07, 0xFE, 0x1F, 0x06, 0x1E, 0x03, 0x33, 0x83, 0x31, 0xC3, 0x30, 0x63, 0x30, 0x33, 0x30, 0x1E, 0x18, 0xFE, 0x1F, 0xF8, 0x07, // Code for char 0
|
||||||
|
0x0A, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x30, 0x0C, 0x30, 0x0E, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, // Code for char 1
|
||||||
|
0x0B, 0x1C, 0x30, 0x1E, 0x38, 0x07, 0x3C, 0x03, 0x3E, 0x03, 0x37, 0x83, 0x33, 0xC3, 0x31, 0xE3, 0x30, 0x77, 0x30, 0x3E, 0x30, 0x1C, 0x30, // Code for char 2
|
||||||
|
0x0B, 0x0C, 0x0C, 0x0E, 0x1C, 0x07, 0x38, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xE7, 0x39, 0x7E, 0x1F, 0x3C, 0x0E, // Code for char 3
|
||||||
|
0x0B, 0xC0, 0x03, 0xE0, 0x03, 0x70, 0x03, 0x38, 0x03, 0x1C, 0x03, 0x0E, 0x03, 0x07, 0x03, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x03, 0x00, 0x03, // Code for char 4
|
||||||
|
0x0B, 0x3F, 0x0C, 0x7F, 0x1C, 0x63, 0x38, 0x63, 0x30, 0x63, 0x30, 0x63, 0x30, 0x63, 0x30, 0x63, 0x30, 0xE3, 0x38, 0xC3, 0x1F, 0x83, 0x0F, // Code for char 5
|
||||||
|
0x0B, 0xC0, 0x0F, 0xF0, 0x1F, 0xF8, 0x39, 0xDC, 0x30, 0xCE, 0x30, 0xC7, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x39, 0x80, 0x1F, 0x00, 0x0F, // Code for char 6
|
||||||
|
0x0B, 0x03, 0x00, 0x03, 0x00, 0x03, 0x00, 0x03, 0x30, 0x03, 0x3C, 0x03, 0x0F, 0xC3, 0x03, 0xF3, 0x00, 0x3F, 0x00, 0x0F, 0x00, 0x03, 0x00, // Code for char 7
|
||||||
|
0x0B, 0x00, 0x0F, 0xBC, 0x1F, 0xFE, 0x39, 0xE7, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xE7, 0x30, 0xFE, 0x39, 0xBC, 0x1F, 0x00, 0x0F, // Code for char 8
|
||||||
|
0x0B, 0x3C, 0x00, 0x7E, 0x00, 0xE7, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x38, 0xC3, 0x1C, 0xC3, 0x0E, 0xE7, 0x07, 0xFE, 0x03, 0xFC, 0x00, // Code for char 9
|
||||||
|
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x1C, 0x70, 0x1C, 0x70, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char :
|
||||||
|
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x9C, 0x70, 0xFC, 0x70, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char ;
|
||||||
|
0x09, 0x00, 0x00, 0xC0, 0x00, 0xE0, 0x01, 0xF0, 0x03, 0x38, 0x07, 0x1C, 0x0E, 0x0E, 0x1C, 0x07, 0x38, 0x03, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char <
|
||||||
|
0x0A, 0x00, 0x00, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x00, 0x00, // Code for char =
|
||||||
|
0x09, 0x00, 0x00, 0x03, 0x30, 0x07, 0x38, 0x0E, 0x1C, 0x1C, 0x0E, 0x38, 0x07, 0xF0, 0x03, 0xE0, 0x01, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char >
|
||||||
|
0x0A, 0x1C, 0x00, 0x1E, 0x00, 0x07, 0x00, 0x03, 0x00, 0x83, 0x37, 0xC3, 0x37, 0xE3, 0x00, 0x77, 0x00, 0x3E, 0x00, 0x1C, 0x00, 0x00, 0x00, // Code for char ?
|
||||||
|
0x0B, 0xF8, 0x0F, 0xFE, 0x1F, 0x07, 0x18, 0xF3, 0x33, 0xFB, 0x37, 0x1B, 0x36, 0xFB, 0x37, 0xFB, 0x37, 0x07, 0x36, 0xFE, 0x03, 0xF8, 0x01, // Code for char @
|
||||||
|
0x0A, 0x00, 0x38, 0x00, 0x3F, 0xE0, 0x07, 0xFC, 0x06, 0x1F, 0x06, 0x1F, 0x06, 0xFC, 0x06, 0xE0, 0x07, 0x00, 0x3F, 0x00, 0x38, 0x00, 0x00, // Code for char A
|
||||||
|
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xE7, 0x30, 0xFE, 0x39, 0xBC, 0x1F, 0x00, 0x0F, 0x00, 0x00, // Code for char B
|
||||||
|
0x0A, 0xF0, 0x03, 0xFC, 0x0F, 0x0E, 0x1C, 0x07, 0x38, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x07, 0x38, 0x0E, 0x1C, 0x0C, 0x0C, 0x00, 0x00, // Code for char C
|
||||||
|
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x07, 0x38, 0x0E, 0x1C, 0xFC, 0x0F, 0xF0, 0x03, 0x00, 0x00, // Code for char D
|
||||||
|
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0x03, 0x30, 0x03, 0x30, 0x00, 0x00, // Code for char E
|
||||||
|
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, // Code for char F
|
||||||
|
0x0A, 0xF0, 0x03, 0xFC, 0x0F, 0x0E, 0x1C, 0x07, 0x38, 0x03, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC7, 0x3F, 0xC6, 0x3F, 0x00, 0x00, // Code for char G
|
||||||
|
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char H
|
||||||
|
0x08, 0x00, 0x00, 0x00, 0x00, 0x03, 0x30, 0x03, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x30, 0x03, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char I
|
||||||
|
0x0A, 0x00, 0x0E, 0x00, 0x1E, 0x00, 0x38, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x38, 0xFF, 0x1F, 0xFF, 0x07, 0x00, 0x00, // Code for char J
|
||||||
|
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0xC0, 0x00, 0xE0, 0x01, 0xF0, 0x03, 0x38, 0x07, 0x1C, 0x0E, 0x0E, 0x1C, 0x07, 0x38, 0x03, 0x30, 0x00, 0x00, // Code for char K
|
||||||
|
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, // Code for char L
|
||||||
|
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0x1E, 0x00, 0x78, 0x00, 0xE0, 0x01, 0xE0, 0x01, 0x78, 0x00, 0x1E, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char M
|
||||||
|
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0x0E, 0x00, 0x38, 0x00, 0xF0, 0x00, 0xC0, 0x03, 0x00, 0x07, 0x00, 0x1C, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char N
|
||||||
|
0x0A, 0xF0, 0x03, 0xFC, 0x0F, 0x0E, 0x1C, 0x07, 0x38, 0x03, 0x30, 0x03, 0x30, 0x07, 0x38, 0x0E, 0x1C, 0xFC, 0x0F, 0xF0, 0x03, 0x00, 0x00, // Code for char O
|
||||||
|
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0x83, 0x01, 0x83, 0x01, 0x83, 0x01, 0x83, 0x01, 0x83, 0x01, 0xC7, 0x01, 0xFE, 0x00, 0x7C, 0x00, 0x00, 0x00, // Code for char P
|
||||||
|
0x0A, 0xF0, 0x03, 0xFC, 0x0F, 0x0E, 0x1C, 0x07, 0x38, 0x03, 0x30, 0x03, 0x36, 0x07, 0x3E, 0x0E, 0x1C, 0xFC, 0x3F, 0xF0, 0x33, 0x00, 0x00, // Code for char Q
|
||||||
|
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0x83, 0x01, 0x83, 0x01, 0x83, 0x03, 0x83, 0x07, 0x83, 0x0F, 0xC7, 0x1D, 0xFE, 0x38, 0x7C, 0x30, 0x00, 0x00, // Code for char R
|
||||||
|
0x0A, 0x3C, 0x0C, 0x7E, 0x1C, 0xE7, 0x38, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC7, 0x39, 0x8E, 0x1F, 0x0C, 0x0F, 0x00, 0x00, // Code for char S
|
||||||
|
0x09, 0x00, 0x00, 0x03, 0x00, 0x03, 0x00, 0x03, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x00, 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char T
|
||||||
|
0x0A, 0xFF, 0x07, 0xFF, 0x1F, 0x00, 0x38, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x38, 0xFF, 0x1F, 0xFF, 0x07, 0x00, 0x00, // Code for char U
|
||||||
|
0x0A, 0x07, 0x00, 0x3F, 0x00, 0xF8, 0x01, 0xC0, 0x0F, 0x00, 0x3E, 0x00, 0x3E, 0xC0, 0x0F, 0xF8, 0x01, 0x3F, 0x00, 0x07, 0x00, 0x00, 0x00, // Code for char V
|
||||||
|
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x1C, 0x00, 0x06, 0x80, 0x03, 0x80, 0x03, 0x00, 0x06, 0x00, 0x1C, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char W
|
||||||
|
0x0A, 0x03, 0x30, 0x0F, 0x3C, 0x1C, 0x0E, 0x30, 0x03, 0xE0, 0x01, 0xE0, 0x01, 0x30, 0x03, 0x1C, 0x0E, 0x0F, 0x3C, 0x03, 0x30, 0x00, 0x00, // Code for char X
|
||||||
|
0x0A, 0x03, 0x00, 0x0F, 0x00, 0x3C, 0x00, 0xF0, 0x00, 0xC0, 0x3F, 0xC0, 0x3F, 0xF0, 0x00, 0x3C, 0x00, 0x0F, 0x00, 0x03, 0x00, 0x00, 0x00, // Code for char Y
|
||||||
|
0x0A, 0x03, 0x30, 0x03, 0x3C, 0x03, 0x3E, 0x03, 0x33, 0xC3, 0x31, 0xE3, 0x30, 0x33, 0x30, 0x1F, 0x30, 0x0F, 0x30, 0x03, 0x30, 0x00, 0x00, // Code for char Z
|
||||||
|
0x08, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char [
|
||||||
|
0x0B, 0x0E, 0x00, 0x1C, 0x00, 0x38, 0x00, 0x70, 0x00, 0xE0, 0x00, 0xC0, 0x01, 0x80, 0x03, 0x00, 0x07, 0x00, 0x0E, 0x00, 0x1C, 0x00, 0x18, // Code for char BackSlash
|
||||||
|
0x08, 0x00, 0x00, 0x00, 0x00, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char ]
|
||||||
|
0x0B, 0x60, 0x00, 0x70, 0x00, 0x38, 0x00, 0x1C, 0x00, 0x0E, 0x00, 0x07, 0x00, 0x0E, 0x00, 0x1C, 0x00, 0x38, 0x00, 0x70, 0x00, 0x60, 0x00, // Code for char ^
|
||||||
|
0x0B, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, // Code for char _
|
||||||
|
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x7E, 0x00, 0x4E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char `
|
||||||
|
0x0A, 0x00, 0x1C, 0x40, 0x3E, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0xE0, 0x3F, 0xC0, 0x3F, 0x00, 0x00, // Code for char a
|
||||||
|
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0xC0, 0x30, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0xE0, 0x38, 0xC0, 0x1F, 0x80, 0x0F, 0x00, 0x00, // Code for char b
|
||||||
|
0x0A, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x38, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0xC0, 0x18, 0x80, 0x08, 0x00, 0x00, // Code for char c
|
||||||
|
0x0A, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x38, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0xE0, 0x30, 0xC0, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char d
|
||||||
|
0x0A, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x3B, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0xC0, 0x13, 0x80, 0x01, 0x00, 0x00, // Code for char e
|
||||||
|
0x08, 0xC0, 0x00, 0xC0, 0x00, 0xFC, 0x3F, 0xFE, 0x3F, 0xC7, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char f
|
||||||
|
0x0A, 0x80, 0x03, 0xC0, 0xC7, 0xE0, 0xCE, 0x60, 0xCC, 0x60, 0xCC, 0x60, 0xCC, 0x60, 0xCC, 0x60, 0xE6, 0xE0, 0x7F, 0xE0, 0x3F, 0x00, 0x00, // Code for char g
|
||||||
|
0x09, 0xFF, 0x3F, 0xFF, 0x3F, 0xC0, 0x00, 0x60, 0x00, 0x60, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xC0, 0x3F, 0x80, 0x3F, 0x00, 0x00, 0x00, 0x00, // Code for char h
|
||||||
|
0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0x30, 0xEC, 0x3F, 0xEC, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char i
|
||||||
|
0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xC0, 0x60, 0xC0, 0xEC, 0xFF, 0xEC, 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char j
|
||||||
|
0x09, 0x00, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x03, 0x80, 0x07, 0xC0, 0x0F, 0xE0, 0x1C, 0x60, 0x38, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char k
|
||||||
|
0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x03, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char l
|
||||||
|
0x0A, 0xE0, 0x3F, 0xC0, 0x3F, 0xE0, 0x00, 0xE0, 0x00, 0xC0, 0x3F, 0xC0, 0x3F, 0xE0, 0x00, 0xE0, 0x00, 0xC0, 0x3F, 0x80, 0x3F, 0x00, 0x00, // Code for char m
|
||||||
|
0x0A, 0x00, 0x00, 0xE0, 0x3F, 0xE0, 0x3F, 0x60, 0x00, 0x60, 0x00, 0x60, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xC0, 0x3F, 0x80, 0x3F, 0x00, 0x00, // Code for char n
|
||||||
|
0x0A, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x38, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0xE0, 0x38, 0xC0, 0x1F, 0x80, 0x0F, 0x00, 0x00, // Code for char o
|
||||||
|
0x0A, 0xE0, 0xFF, 0xE0, 0xFF, 0x60, 0x0C, 0x60, 0x18, 0x60, 0x18, 0x60, 0x18, 0x60, 0x18, 0xE0, 0x1C, 0xC0, 0x0F, 0x80, 0x07, 0x00, 0x00, // Code for char p
|
||||||
|
0x0A, 0x80, 0x07, 0xC0, 0x0F, 0xE0, 0x1C, 0x60, 0x18, 0x60, 0x18, 0x60, 0x18, 0x60, 0x18, 0x60, 0x0C, 0xE0, 0xFF, 0xE0, 0xFF, 0x00, 0x00, // Code for char q
|
||||||
|
0x0A, 0x00, 0x00, 0xE0, 0x3F, 0xE0, 0x3F, 0xC0, 0x00, 0x60, 0x00, 0x60, 0x00, 0x60, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xC0, 0x00, 0x00, 0x00, // Code for char r
|
||||||
|
0x08, 0xC0, 0x11, 0xE0, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x3F, 0x40, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char s
|
||||||
|
0x08, 0x60, 0x00, 0x60, 0x00, 0xFE, 0x1F, 0xFE, 0x3F, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char t
|
||||||
|
0x0A, 0xE0, 0x0F, 0xE0, 0x1F, 0x00, 0x38, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x18, 0xE0, 0x3F, 0xE0, 0x3F, 0x00, 0x00, // Code for char u
|
||||||
|
0x0A, 0x60, 0x00, 0xE0, 0x01, 0x80, 0x07, 0x00, 0x1E, 0x00, 0x38, 0x00, 0x38, 0x00, 0x1E, 0x80, 0x07, 0xE0, 0x01, 0x60, 0x00, 0x00, 0x00, // Code for char v
|
||||||
|
0x0A, 0xE0, 0x07, 0xE0, 0x1F, 0x00, 0x38, 0x00, 0x1C, 0xE0, 0x0F, 0xE0, 0x0F, 0x00, 0x1C, 0x00, 0x38, 0xE0, 0x1F, 0xE0, 0x07, 0x00, 0x00, // Code for char w
|
||||||
|
0x09, 0x60, 0x30, 0xE0, 0x38, 0xC0, 0x1D, 0x80, 0x0F, 0x00, 0x07, 0x80, 0x0F, 0xC0, 0x1D, 0xE0, 0x38, 0x60, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char x
|
||||||
|
0x09, 0x00, 0x00, 0x60, 0x00, 0xE0, 0x81, 0x80, 0xE7, 0x00, 0x7E, 0x00, 0x1E, 0x80, 0x07, 0xE0, 0x01, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char y
|
||||||
|
0x09, 0x60, 0x30, 0x60, 0x38, 0x60, 0x3C, 0x60, 0x36, 0x60, 0x33, 0xE0, 0x31, 0xE0, 0x30, 0x60, 0x30, 0x20, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char z
|
||||||
|
0x09, 0x00, 0x00, 0x80, 0x00, 0xC0, 0x01, 0xFC, 0x1F, 0x7E, 0x3F, 0x07, 0x70, 0x03, 0x60, 0x03, 0x60, 0x03, 0x60, 0x00, 0x00, 0x00, 0x00, // Code for char {
|
||||||
|
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char |
|
||||||
|
0x09, 0x00, 0x00, 0x03, 0x60, 0x03, 0x60, 0x03, 0x60, 0x07, 0x70, 0x7E, 0x3F, 0xFC, 0x1F, 0xC0, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char }
|
||||||
|
0x0A, 0x10, 0x00, 0x18, 0x00, 0x0C, 0x00, 0x04, 0x00, 0x0C, 0x00, 0x18, 0x00, 0x10, 0x00, 0x18, 0x00, 0x0C, 0x00, 0x04, 0x00, 0x00, 0x00, // Code for char ~
|
||||||
|
0x0A, 0x00, 0x0F, 0x80, 0x0F, 0xC0, 0x0C, 0x60, 0x0C, 0x30, 0x0C, 0x30, 0x0C, 0x60, 0x0C, 0xC0, 0x0C, 0x80, 0x0F, 0x00, 0x0F, 0x00, 0x00 // Code for char
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
//Font Generated by MikroElektronika GLCD Font Creator 1.2.0.0
|
||||||
|
//MikroElektronika 2011
|
||||||
|
//http://www.mikroe.com
|
||||||
|
|
||||||
|
//GLCD FontName : Terminal12x16
|
||||||
|
//GLCD FontSize : 12 x 16
|
||||||
|
|
||||||
|
fontdatatype Terminal12x16[] PROGMEM = {
|
||||||
|
0x0C, 0x10, 0x20, 0x60,
|
||||||
|
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char
|
||||||
|
0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xFF, 0x33, 0xFF, 0x33, 0xFF, 0x33, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char !
|
||||||
|
0x09, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x3C, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x3C, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char "
|
||||||
|
0x0C, 0x00, 0x02, 0x10, 0x1E, 0x90, 0x1F, 0xF0, 0x1F, 0xFE, 0x03, 0x7E, 0x1E, 0x9E, 0x1F, 0xF0, 0x1F, 0xFE, 0x03, 0x7E, 0x02, 0x1E, 0x00, 0x10, 0x00, // Code for char #
|
||||||
|
0x0A, 0x00, 0x00, 0x78, 0x04, 0xFC, 0x0C, 0xFC, 0x0C, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xCC, 0x0F, 0xCC, 0x0F, 0x88, 0x07, 0x00, 0x00, 0x00, 0x00, // Code for char $
|
||||||
|
0x0C, 0x00, 0x30, 0x38, 0x38, 0x38, 0x3C, 0x38, 0x1E, 0x38, 0x0F, 0x80, 0x07, 0xC0, 0x03, 0xE0, 0x39, 0xF0, 0x38, 0x78, 0x38, 0x3C, 0x38, 0x1C, 0x00, // Code for char %
|
||||||
|
0x0B, 0x00, 0x00, 0x00, 0x1F, 0xB8, 0x3F, 0xFC, 0x3F, 0xFE, 0x31, 0xE6, 0x37, 0xFE, 0x3F, 0x3E, 0x1E, 0x1C, 0x3E, 0x00, 0x36, 0x00, 0x22, 0x00, 0x00, // Code for char &
|
||||||
|
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x27, 0x00, 0x3F, 0x00, 0x3F, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char '
|
||||||
|
0x09, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x03, 0xFC, 0x0F, 0xFE, 0x1F, 0xFF, 0x3F, 0x07, 0x38, 0x01, 0x20, 0x01, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char (
|
||||||
|
0x09, 0x00, 0x00, 0x00, 0x00, 0x01, 0x20, 0x01, 0x20, 0x07, 0x38, 0xFF, 0x3F, 0xFE, 0x1F, 0xFC, 0x0F, 0xF0, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char )
|
||||||
|
0x0A, 0x00, 0x00, 0x98, 0x0C, 0xB8, 0x0E, 0xF8, 0x0F, 0xF8, 0x0F, 0xF8, 0x0F, 0xF8, 0x0F, 0xF8, 0x0F, 0xB8, 0x0E, 0x98, 0x0C, 0x00, 0x00, 0x00, 0x00, // Code for char *
|
||||||
|
0x0A, 0x00, 0x00, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0xF0, 0x0F, 0xF0, 0x0F, 0xF0, 0x0F, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, // Code for char +
|
||||||
|
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xB8, 0x00, 0xF8, 0x00, 0xF8, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char ,
|
||||||
|
0x0A, 0x00, 0x00, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, // Code for char -
|
||||||
|
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x38, 0x00, 0x38, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char .
|
||||||
|
0x0C, 0x00, 0x18, 0x00, 0x1C, 0x00, 0x1E, 0x00, 0x0F, 0x80, 0x07, 0xC0, 0x03, 0xE0, 0x01, 0xF0, 0x00, 0x78, 0x00, 0x3C, 0x00, 0x1E, 0x00, 0x0E, 0x00, // Code for char /
|
||||||
|
0x0C, 0xF8, 0x07, 0xFE, 0x1F, 0xFE, 0x1F, 0x07, 0x3F, 0x83, 0x33, 0xC3, 0x31, 0xE3, 0x30, 0x73, 0x30, 0x3F, 0x38, 0xFE, 0x1F, 0xFE, 0x1F, 0xF8, 0x07, // Code for char 0
|
||||||
|
0x0B, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x30, 0x0C, 0x30, 0x0E, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, // Code for char 1
|
||||||
|
0x0C, 0x1C, 0x30, 0x1E, 0x38, 0x1F, 0x3C, 0x07, 0x3E, 0x03, 0x3F, 0x83, 0x37, 0xC3, 0x33, 0xE3, 0x31, 0xF7, 0x30, 0x7F, 0x30, 0x3E, 0x30, 0x1C, 0x30, // Code for char 2
|
||||||
|
0x0C, 0x0C, 0x0C, 0x0E, 0x1C, 0x0F, 0x3C, 0xC7, 0x38, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xE7, 0x39, 0xFF, 0x3F, 0x7E, 0x1F, 0x3C, 0x0E, // Code for char 3
|
||||||
|
0x0C, 0xC0, 0x03, 0xE0, 0x03, 0xF0, 0x03, 0x78, 0x03, 0x3C, 0x03, 0x1E, 0x03, 0x0F, 0x03, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x03, 0x00, 0x03, // Code for char 4
|
||||||
|
0x0C, 0x3F, 0x0C, 0x7F, 0x1C, 0x7F, 0x3C, 0x63, 0x38, 0x63, 0x30, 0x63, 0x30, 0x63, 0x30, 0x63, 0x30, 0xE3, 0x38, 0xE3, 0x3F, 0xC3, 0x1F, 0x83, 0x0F, // Code for char 5
|
||||||
|
0x0C, 0xC0, 0x0F, 0xF0, 0x1F, 0xF8, 0x3F, 0xFC, 0x39, 0xDE, 0x30, 0xCF, 0x30, 0xC7, 0x30, 0xC3, 0x30, 0xC3, 0x39, 0xC3, 0x3F, 0x80, 0x1F, 0x00, 0x0F, // Code for char 6
|
||||||
|
0x0C, 0x03, 0x00, 0x03, 0x00, 0x03, 0x00, 0x03, 0x30, 0x03, 0x3C, 0x03, 0x3F, 0xC3, 0x0F, 0xF3, 0x03, 0xFF, 0x00, 0x3F, 0x00, 0x0F, 0x00, 0x03, 0x00, // Code for char 7
|
||||||
|
0x0C, 0x00, 0x0F, 0xBC, 0x1F, 0xFE, 0x3F, 0xFF, 0x39, 0xE7, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xE7, 0x30, 0xFF, 0x39, 0xFE, 0x3F, 0xBC, 0x1F, 0x00, 0x0F, // Code for char 8
|
||||||
|
0x0C, 0x3C, 0x00, 0x7E, 0x00, 0xFF, 0x30, 0xE7, 0x30, 0xC3, 0x30, 0xC3, 0x38, 0xC3, 0x3C, 0xC3, 0x1E, 0xE7, 0x0F, 0xFF, 0x07, 0xFE, 0x03, 0xFC, 0x00, // Code for char 9
|
||||||
|
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x1C, 0x70, 0x1C, 0x70, 0x1C, 0x70, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char :
|
||||||
|
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x9C, 0x70, 0xFC, 0x70, 0xFC, 0x70, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char ;
|
||||||
|
0x0A, 0x00, 0x00, 0xC0, 0x00, 0xE0, 0x01, 0xF0, 0x03, 0xF8, 0x07, 0x3C, 0x0F, 0x1E, 0x1E, 0x0F, 0x3C, 0x07, 0x38, 0x03, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char <
|
||||||
|
0x0B, 0x00, 0x00, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x00, 0x00, // Code for char =
|
||||||
|
0x0A, 0x00, 0x00, 0x03, 0x30, 0x07, 0x38, 0x0F, 0x3C, 0x1E, 0x1E, 0x3C, 0x0F, 0xF8, 0x07, 0xF0, 0x03, 0xE0, 0x01, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char >
|
||||||
|
0x0B, 0x1C, 0x00, 0x1E, 0x00, 0x1F, 0x00, 0x07, 0x00, 0x83, 0x37, 0xC3, 0x37, 0xE3, 0x37, 0xF7, 0x00, 0x7F, 0x00, 0x3E, 0x00, 0x1C, 0x00, 0x00, 0x00, // Code for char ?
|
||||||
|
0x0C, 0xF8, 0x0F, 0xFE, 0x1F, 0xFF, 0x1F, 0xF7, 0x3B, 0xFB, 0x37, 0xFB, 0x37, 0xFB, 0x37, 0xFB, 0x37, 0xFF, 0x37, 0xFF, 0x37, 0xFE, 0x03, 0xF8, 0x01, // Code for char @
|
||||||
|
0x0B, 0x00, 0x38, 0x00, 0x3F, 0xE0, 0x3F, 0xFC, 0x07, 0xFF, 0x06, 0x1F, 0x06, 0xFF, 0x06, 0xFC, 0x07, 0xE0, 0x3F, 0x00, 0x3F, 0x00, 0x38, 0x00, 0x00, // Code for char A
|
||||||
|
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xE7, 0x30, 0xFF, 0x39, 0xFE, 0x3F, 0xBC, 0x1F, 0x00, 0x0F, 0x00, 0x00, // Code for char B
|
||||||
|
0x0B, 0xF0, 0x03, 0xFC, 0x0F, 0xFE, 0x1F, 0x0F, 0x3C, 0x07, 0x38, 0x03, 0x30, 0x03, 0x30, 0x07, 0x38, 0x0F, 0x3C, 0x0E, 0x1C, 0x0C, 0x0C, 0x00, 0x00, // Code for char C
|
||||||
|
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x07, 0x38, 0x0F, 0x3C, 0xFE, 0x1F, 0xFC, 0x0F, 0xF0, 0x03, 0x00, 0x00, // Code for char D
|
||||||
|
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0x03, 0x30, 0x03, 0x30, 0x00, 0x00, // Code for char E
|
||||||
|
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, // Code for char F
|
||||||
|
0x0B, 0xF0, 0x03, 0xFC, 0x0F, 0xFE, 0x1F, 0x0F, 0x3C, 0x07, 0x38, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC7, 0x3F, 0xC7, 0x3F, 0xC6, 0x3F, 0x00, 0x00, // Code for char G
|
||||||
|
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char H
|
||||||
|
0x09, 0x00, 0x00, 0x00, 0x00, 0x03, 0x30, 0x03, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x30, 0x03, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char I
|
||||||
|
0x0B, 0x00, 0x0E, 0x00, 0x1E, 0x00, 0x3E, 0x00, 0x38, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x38, 0xFF, 0x3F, 0xFF, 0x1F, 0xFF, 0x07, 0x00, 0x00, // Code for char J
|
||||||
|
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xE0, 0x01, 0xF0, 0x03, 0xF8, 0x07, 0x3C, 0x0F, 0x1E, 0x1E, 0x0F, 0x3C, 0x07, 0x38, 0x03, 0x30, 0x00, 0x00, // Code for char K
|
||||||
|
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, // Code for char L
|
||||||
|
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x7E, 0x00, 0xF8, 0x01, 0xE0, 0x01, 0xF8, 0x01, 0x7E, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char M
|
||||||
|
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x3E, 0x00, 0xF8, 0x00, 0xF0, 0x03, 0xC0, 0x07, 0x00, 0x1F, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char N
|
||||||
|
0x0B, 0xF0, 0x03, 0xFC, 0x0F, 0xFE, 0x1F, 0x0F, 0x3C, 0x07, 0x38, 0x03, 0x30, 0x07, 0x38, 0x0F, 0x3C, 0xFE, 0x1F, 0xFC, 0x0F, 0xF0, 0x03, 0x00, 0x00, // Code for char O
|
||||||
|
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x83, 0x01, 0x83, 0x01, 0x83, 0x01, 0x83, 0x01, 0xC7, 0x01, 0xFF, 0x01, 0xFE, 0x00, 0x7C, 0x00, 0x00, 0x00, // Code for char P
|
||||||
|
0x0B, 0xF0, 0x03, 0xFC, 0x0F, 0xFE, 0x1F, 0x0F, 0x3C, 0x07, 0x38, 0x03, 0x36, 0x07, 0x3E, 0x0F, 0x3E, 0xFE, 0x3F, 0xFC, 0x3F, 0xF0, 0x33, 0x00, 0x00, // Code for char Q
|
||||||
|
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x83, 0x01, 0x83, 0x03, 0x83, 0x07, 0x83, 0x0F, 0xC7, 0x1F, 0xFF, 0x3D, 0xFE, 0x38, 0x7C, 0x30, 0x00, 0x00, // Code for char R
|
||||||
|
0x0B, 0x3C, 0x0C, 0x7E, 0x1C, 0xFF, 0x3C, 0xE7, 0x38, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC7, 0x39, 0xCF, 0x3F, 0x8E, 0x1F, 0x0C, 0x0F, 0x00, 0x00, // Code for char S
|
||||||
|
0x0A, 0x00, 0x00, 0x03, 0x00, 0x03, 0x00, 0x03, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x00, 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char T
|
||||||
|
0x0B, 0xFF, 0x07, 0xFF, 0x1F, 0xFF, 0x3F, 0x00, 0x38, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x38, 0xFF, 0x3F, 0xFF, 0x1F, 0xFF, 0x07, 0x00, 0x00, // Code for char U
|
||||||
|
0x0B, 0x07, 0x00, 0x3F, 0x00, 0xFF, 0x01, 0xF8, 0x0F, 0xC0, 0x3F, 0x00, 0x3E, 0xC0, 0x3F, 0xF8, 0x0F, 0xFF, 0x01, 0x3F, 0x00, 0x07, 0x00, 0x00, 0x00, // Code for char V
|
||||||
|
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x1E, 0x80, 0x07, 0x80, 0x03, 0x80, 0x07, 0x00, 0x1E, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char W
|
||||||
|
0x0B, 0x03, 0x30, 0x0F, 0x3C, 0x1F, 0x3E, 0x3C, 0x0F, 0xF0, 0x03, 0xE0, 0x01, 0xF0, 0x03, 0x3C, 0x0F, 0x1F, 0x3E, 0x0F, 0x3C, 0x03, 0x30, 0x00, 0x00, // Code for char X
|
||||||
|
0x0B, 0x03, 0x00, 0x0F, 0x00, 0x3F, 0x00, 0xFC, 0x00, 0xF0, 0x3F, 0xC0, 0x3F, 0xF0, 0x3F, 0xFC, 0x00, 0x3F, 0x00, 0x0F, 0x00, 0x03, 0x00, 0x00, 0x00, // Code for char Y
|
||||||
|
0x0B, 0x03, 0x30, 0x03, 0x3C, 0x03, 0x3E, 0x03, 0x3F, 0xC3, 0x33, 0xE3, 0x31, 0xF3, 0x30, 0x3F, 0x30, 0x1F, 0x30, 0x0F, 0x30, 0x03, 0x30, 0x00, 0x00, // Code for char Z
|
||||||
|
0x09, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char [
|
||||||
|
0x0C, 0x0E, 0x00, 0x1E, 0x00, 0x3C, 0x00, 0x78, 0x00, 0xF0, 0x00, 0xE0, 0x01, 0xC0, 0x03, 0x80, 0x07, 0x00, 0x0F, 0x00, 0x1E, 0x00, 0x1C, 0x00, 0x18, // Code for char BackSlash
|
||||||
|
0x09, 0x00, 0x00, 0x00, 0x00, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char ]
|
||||||
|
0x0C, 0x60, 0x00, 0x70, 0x00, 0x78, 0x00, 0x3C, 0x00, 0x1E, 0x00, 0x0F, 0x00, 0x0F, 0x00, 0x1E, 0x00, 0x3C, 0x00, 0x78, 0x00, 0x70, 0x00, 0x60, 0x00, // Code for char ^
|
||||||
|
0x0C, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, // Code for char _
|
||||||
|
0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x7E, 0x00, 0x7E, 0x00, 0x4E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char `
|
||||||
|
0x0B, 0x00, 0x1C, 0x40, 0x3E, 0x60, 0x3F, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0xE0, 0x3F, 0xE0, 0x3F, 0xC0, 0x3F, 0x00, 0x00, // Code for char a
|
||||||
|
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xE0, 0x30, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0xE0, 0x38, 0xE0, 0x3F, 0xC0, 0x1F, 0x80, 0x0F, 0x00, 0x00, // Code for char b
|
||||||
|
0x0B, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x3F, 0xE0, 0x38, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0xE0, 0x38, 0xC0, 0x18, 0x80, 0x08, 0x00, 0x00, // Code for char c
|
||||||
|
0x0B, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x3F, 0xE0, 0x38, 0x60, 0x30, 0x60, 0x30, 0xE0, 0x30, 0xE0, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char d
|
||||||
|
0x0B, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x3F, 0xE0, 0x3B, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0xE0, 0x33, 0xC0, 0x13, 0x80, 0x01, 0x00, 0x00, // Code for char e
|
||||||
|
0x09, 0xC0, 0x00, 0xC0, 0x00, 0xFC, 0x3F, 0xFE, 0x3F, 0xFF, 0x3F, 0xC7, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char f
|
||||||
|
0x0B, 0x80, 0x03, 0xC0, 0xC7, 0xE0, 0xCF, 0xE0, 0xCE, 0x60, 0xCC, 0x60, 0xCC, 0x60, 0xCC, 0x60, 0xEE, 0xE0, 0xFF, 0xE0, 0x7F, 0xE0, 0x3F, 0x00, 0x00, // Code for char g
|
||||||
|
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xE0, 0x00, 0x60, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xE0, 0x3F, 0xC0, 0x3F, 0x80, 0x3F, 0x00, 0x00, 0x00, 0x00, // Code for char h
|
||||||
|
0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0x30, 0xEC, 0x3F, 0xEC, 0x3F, 0xEC, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char i
|
||||||
|
0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xE0, 0x60, 0xC0, 0xEC, 0xFF, 0xEC, 0xFF, 0xEC, 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char j
|
||||||
|
0x0A, 0x00, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x80, 0x07, 0xC0, 0x0F, 0xE0, 0x1F, 0xE0, 0x3C, 0x60, 0x38, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char k
|
||||||
|
0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x03, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char l
|
||||||
|
0x0B, 0xE0, 0x3F, 0xE0, 0x3F, 0xE0, 0x3F, 0xE0, 0x00, 0xE0, 0x3F, 0xC0, 0x3F, 0xE0, 0x3F, 0xE0, 0x00, 0xE0, 0x3F, 0xC0, 0x3F, 0x80, 0x3F, 0x00, 0x00, // Code for char m
|
||||||
|
0x0B, 0x00, 0x00, 0xE0, 0x3F, 0xE0, 0x3F, 0xE0, 0x3F, 0x60, 0x00, 0x60, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xE0, 0x3F, 0xC0, 0x3F, 0x80, 0x3F, 0x00, 0x00, // Code for char n
|
||||||
|
0x0B, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x3F, 0xE0, 0x38, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0xE0, 0x38, 0xE0, 0x3F, 0xC0, 0x1F, 0x80, 0x0F, 0x00, 0x00, // Code for char o
|
||||||
|
0x0B, 0xE0, 0xFF, 0xE0, 0xFF, 0xE0, 0xFF, 0x60, 0x1C, 0x60, 0x18, 0x60, 0x18, 0x60, 0x18, 0xE0, 0x1C, 0xE0, 0x1F, 0xC0, 0x0F, 0x80, 0x07, 0x00, 0x00, // Code for char p
|
||||||
|
0x0B, 0x80, 0x07, 0xC0, 0x0F, 0xE0, 0x1F, 0xE0, 0x1C, 0x60, 0x18, 0x60, 0x18, 0x60, 0x18, 0x60, 0x1C, 0xE0, 0xFF, 0xE0, 0xFF, 0xE0, 0xFF, 0x00, 0x00, // Code for char q
|
||||||
|
0x0B, 0x00, 0x00, 0xE0, 0x3F, 0xE0, 0x3F, 0xE0, 0x3F, 0xE0, 0x00, 0x60, 0x00, 0x60, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xE0, 0x00, 0xC0, 0x00, 0x00, 0x00, // Code for char r
|
||||||
|
0x09, 0xC0, 0x11, 0xE0, 0x33, 0xE0, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x3F, 0x60, 0x3F, 0x40, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char s
|
||||||
|
0x09, 0x60, 0x00, 0x60, 0x00, 0xFE, 0x1F, 0xFE, 0x3F, 0xFE, 0x3F, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char t
|
||||||
|
0x0B, 0xE0, 0x0F, 0xE0, 0x1F, 0xE0, 0x3F, 0x00, 0x38, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x38, 0xE0, 0x3F, 0xE0, 0x3F, 0xE0, 0x3F, 0x00, 0x00, // Code for char u
|
||||||
|
0x0B, 0x60, 0x00, 0xE0, 0x01, 0xE0, 0x07, 0x80, 0x1F, 0x00, 0x3E, 0x00, 0x38, 0x00, 0x3E, 0x80, 0x1F, 0xE0, 0x07, 0xE0, 0x01, 0x60, 0x00, 0x00, 0x00, // Code for char v
|
||||||
|
0x0B, 0xE0, 0x07, 0xE0, 0x1F, 0xE0, 0x3F, 0x00, 0x3C, 0xE0, 0x1F, 0xE0, 0x0F, 0xE0, 0x1F, 0x00, 0x3C, 0xE0, 0x3F, 0xE0, 0x1F, 0xE0, 0x07, 0x00, 0x00, // Code for char w
|
||||||
|
0x0A, 0x60, 0x30, 0xE0, 0x38, 0xE0, 0x3D, 0xC0, 0x1F, 0x80, 0x0F, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x3D, 0xE0, 0x38, 0x60, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char x
|
||||||
|
0x0A, 0x00, 0x00, 0x60, 0x00, 0xE0, 0x81, 0xE0, 0xE7, 0x80, 0xFF, 0x00, 0x7E, 0x80, 0x1F, 0xE0, 0x07, 0xE0, 0x01, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char y
|
||||||
|
0x0A, 0x60, 0x30, 0x60, 0x38, 0x60, 0x3C, 0x60, 0x3E, 0x60, 0x37, 0xE0, 0x33, 0xE0, 0x31, 0xE0, 0x30, 0x60, 0x30, 0x20, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char z
|
||||||
|
0x0A, 0x00, 0x00, 0x80, 0x00, 0xC0, 0x01, 0xFC, 0x1F, 0xFE, 0x3F, 0x7F, 0x7F, 0x07, 0x70, 0x03, 0x60, 0x03, 0x60, 0x03, 0x60, 0x00, 0x00, 0x00, 0x00, // Code for char {
|
||||||
|
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char |
|
||||||
|
0x0A, 0x00, 0x00, 0x03, 0x60, 0x03, 0x60, 0x03, 0x60, 0x07, 0x70, 0x7F, 0x7F, 0xFE, 0x3F, 0xFC, 0x1F, 0xC0, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char }
|
||||||
|
0x0B, 0x10, 0x00, 0x18, 0x00, 0x1C, 0x00, 0x0C, 0x00, 0x0C, 0x00, 0x1C, 0x00, 0x18, 0x00, 0x18, 0x00, 0x1C, 0x00, 0x0C, 0x00, 0x04, 0x00, 0x00, 0x00, // Code for char ~
|
||||||
|
0x0B, 0x00, 0x0F, 0x80, 0x0F, 0xC0, 0x0F, 0xE0, 0x0C, 0x70, 0x0C, 0x30, 0x0C, 0x70, 0x0C, 0xE0, 0x0C, 0xC0, 0x0F, 0x80, 0x0F, 0x00, 0x0F, 0x00, 0x00 // Code for char
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
//Font Generated by MikroElektronika GLCD Font Creator 1.2.0.0
|
||||||
|
//MikroElektronika 2011
|
||||||
|
//http://www.mikroe.com
|
||||||
|
|
||||||
|
//GLCD FontName : Trebuchet_MS16x21
|
||||||
|
//GLCD FontSize : 16 x 21
|
||||||
|
|
||||||
|
fontdatatype Trebuchet_MS16x21[] PROGMEM = {
|
||||||
|
0x10, 0x15, 0x2E, 0x0D,
|
||||||
|
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char .
|
||||||
|
0x0C, 0x00, 0x00, 0x10, 0x00, 0x00, 0x1E, 0x00, 0xC0, 0x1F, 0x00, 0xF0, 0x1F, 0x00, 0xFE, 0x0F, 0x80, 0xFF, 0x03, 0xF0, 0x7F, 0x00, 0xFE, 0x0F, 0x00, 0xFF, 0x03, 0x00, 0x7F, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char /
|
||||||
|
0x10, 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0xF0, 0xFF, 0x03, 0xFC, 0xFF, 0x07, 0xFE, 0xFF, 0x0F, 0x3E, 0x80, 0x0F, 0x0F, 0x00, 0x1E, 0x07, 0x00, 0x1C, 0x07, 0x00, 0x1C, 0x07, 0x00, 0x1C, 0x0F, 0x00, 0x1E, 0x1F, 0x80, 0x0F, 0xFE, 0xFF, 0x0F, 0xFC, 0xFF, 0x07, 0xF8, 0xFF, 0x01, 0xC0, 0x7F, 0x00, // Code for char 0
|
||||||
|
0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x78, 0x00, 0x00, 0x38, 0x00, 0x00, 0x3C, 0x00, 0x00, 0xFE, 0xFF, 0x1F, 0xFE, 0xFF, 0x1F, 0xFF, 0xFF, 0x1F, 0xFF, 0xFF, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char 1
|
||||||
|
0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x18, 0x1E, 0x00, 0x1C, 0x0E, 0x00, 0x1F, 0x0F, 0x80, 0x1F, 0x07, 0xC0, 0x1F, 0x07, 0xF0, 0x1F, 0x07, 0xF8, 0x1D, 0x07, 0xFE, 0x1C, 0x0F, 0x3F, 0x1C, 0xFE, 0x1F, 0x1C, 0xFE, 0x0F, 0x1C, 0xFC, 0x03, 0x1C, 0xF8, 0x00, 0x1C, 0x00, 0x00, 0x1C, // Code for char 2
|
||||||
|
0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x00, 0x0E, 0x0E, 0x00, 0x0F, 0x0F, 0x00, 0x1E, 0x07, 0x00, 0x1C, 0x07, 0x07, 0x1C, 0x07, 0x07, 0x1C, 0x07, 0x07, 0x1C, 0x8F, 0x0F, 0x1E, 0xFF, 0x1F, 0x1E, 0xFE, 0xFD, 0x0F, 0xFC, 0xFD, 0x0F, 0x78, 0xF8, 0x07, 0x00, 0xF0, 0x01, 0x00, 0x00, 0x00, // Code for char 3
|
||||||
|
0x10, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0xF0, 0x00, 0x00, 0xF8, 0x00, 0x00, 0xFE, 0x00, 0x00, 0xEF, 0x00, 0x80, 0xE7, 0x00, 0xC0, 0xE3, 0x00, 0xF0, 0xE0, 0x00, 0x78, 0xE0, 0x00, 0xFC, 0xFF, 0x1F, 0xFE, 0xFF, 0x1F, 0xFF, 0xFF, 0x1F, 0xFF, 0xFF, 0x1F, 0x00, 0xE0, 0x00, 0x00, 0xE0, 0x00, // Code for char 4
|
||||||
|
0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0xFF, 0x03, 0x0F, 0xFF, 0x07, 0x0E, 0xFF, 0x03, 0x1C, 0xFF, 0x01, 0x1C, 0xC7, 0x01, 0x1C, 0xC7, 0x01, 0x1C, 0xC7, 0x01, 0x1E, 0xC7, 0x03, 0x1F, 0xC7, 0xFF, 0x0F, 0x87, 0xFF, 0x0F, 0x07, 0xFF, 0x07, 0x00, 0xFC, 0x01, 0x00, 0x00, 0x00, // Code for char 5
|
||||||
|
0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x80, 0xFF, 0x03, 0xE0, 0xFF, 0x07, 0xF0, 0xFF, 0x0F, 0xF8, 0x0F, 0x1E, 0x7C, 0x07, 0x1C, 0x3E, 0x07, 0x1C, 0x1E, 0x07, 0x1C, 0x0F, 0x07, 0x1C, 0x07, 0x0F, 0x1E, 0x02, 0xFE, 0x0F, 0x00, 0xFE, 0x0F, 0x00, 0xFC, 0x07, 0x00, 0xF0, 0x01, // Code for char 6
|
||||||
|
0x10, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x18, 0x07, 0x00, 0x1E, 0x07, 0xC0, 0x1F, 0x07, 0xF0, 0x1F, 0x07, 0xFC, 0x0F, 0x07, 0xFF, 0x01, 0xC7, 0x7F, 0x00, 0xF7, 0x0F, 0x00, 0xFF, 0x03, 0x00, 0xFF, 0x00, 0x00, 0x3F, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x03, 0x00, 0x00, // Code for char 7
|
||||||
|
0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x03, 0x78, 0xF8, 0x07, 0xFC, 0xFD, 0x0F, 0xFE, 0xFF, 0x0F, 0xFF, 0x1F, 0x1E, 0x8F, 0x0F, 0x1C, 0x07, 0x07, 0x1C, 0x07, 0x0F, 0x1C, 0x8F, 0x0F, 0x1C, 0xFF, 0x3F, 0x1E, 0xFE, 0xFD, 0x0F, 0xFE, 0xFD, 0x0F, 0x78, 0xF0, 0x07, 0x00, 0xE0, 0x03, // Code for char 8
|
||||||
|
0x0F, 0x00, 0x00, 0x00, 0xF0, 0x01, 0x00, 0xFC, 0x07, 0x00, 0xFE, 0x0F, 0x00, 0xFE, 0x0F, 0x08, 0x0F, 0x1E, 0x1C, 0x07, 0x1C, 0x1E, 0x07, 0x1C, 0x0F, 0x07, 0x9C, 0x0F, 0x07, 0xDC, 0x07, 0x0F, 0xFE, 0x03, 0xFE, 0xFF, 0x01, 0xFC, 0xFF, 0x00, 0xF8, 0x3F, 0x00, 0xE0, 0x0F, 0x00, 0x00, 0x00, 0x00, // Code for char 9
|
||||||
|
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x0C, 0xC0, 0x03, 0x1E, 0xC0, 0x03, 0x1E, 0x80, 0x01, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 // Code for char :
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
1590
libraries/SondeLib/Display.cpp
Executable file
1590
libraries/SondeLib/Display.cpp
Executable file
File diff suppressed because it is too large
Load Diff
162
libraries/SondeLib/Display.h
Executable file
162
libraries/SondeLib/Display.h
Executable file
|
|
@ -0,0 +1,162 @@
|
||||||
|
#ifndef Display_h
|
||||||
|
#define Display_h
|
||||||
|
#define FONT_LARGE 1
|
||||||
|
#define FONT_SMALL 0
|
||||||
|
|
||||||
|
#include <SPI.h>
|
||||||
|
//#include <TFT22_ILI9225.h>
|
||||||
|
#include "gfxfont.h"
|
||||||
|
#include <U8x8lib.h>
|
||||||
|
#include <SPIFFS.h>
|
||||||
|
|
||||||
|
|
||||||
|
#define WIDTH_AUTO 9999
|
||||||
|
struct DispEntry {
|
||||||
|
int16_t y;
|
||||||
|
int16_t x;
|
||||||
|
int16_t fmt, width;
|
||||||
|
uint16_t fg,bg;
|
||||||
|
void (*func)(DispEntry *de);
|
||||||
|
const char *extra;
|
||||||
|
};
|
||||||
|
|
||||||
|
#define GPSUSE_BASE 1
|
||||||
|
#define GPSUSE_DIST 2
|
||||||
|
#define GPSUSE_BEARING 4
|
||||||
|
struct DispInfo {
|
||||||
|
DispEntry *de;
|
||||||
|
uint8_t *actions;
|
||||||
|
int16_t *timeouts;
|
||||||
|
const char *label;
|
||||||
|
uint8_t usegps;
|
||||||
|
};
|
||||||
|
|
||||||
|
struct StatInfo {
|
||||||
|
uint8_t len;
|
||||||
|
uint8_t size;
|
||||||
|
};
|
||||||
|
|
||||||
|
// Now starting towards supporting different Display types / libraries
|
||||||
|
class RawDisplay {
|
||||||
|
public:
|
||||||
|
virtual void begin() = 0;
|
||||||
|
virtual void clear() = 0;
|
||||||
|
virtual void setFont(uint8_t fontindex) = 0;
|
||||||
|
virtual void getDispSize(uint8_t *height, uint8_t *width, uint8_t *lineskip, uint8_t *colskip) = 0;
|
||||||
|
virtual void drawString(uint8_t x, uint8_t y, const char *s, int16_t width=WIDTH_AUTO, uint16_t fg=0xffff, uint16_t bg=0 ) = 0;
|
||||||
|
virtual void drawTile(uint8_t x, uint8_t y, uint8_t cnt, uint8_t *tile_ptr) = 0;
|
||||||
|
virtual void drawTriangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t x3, uint16_t y3, uint16_t color, bool fill) = 0;
|
||||||
|
virtual void drawBitmap(uint16_t x1, uint16_t y1, const uint16_t* bitmap, int16_t w, int16_t h) = 0;
|
||||||
|
virtual void welcome() = 0;
|
||||||
|
virtual void drawIP(uint8_t x, uint8_t y, int16_t width=WIDTH_AUTO, uint16_t fg=0xffff, uint16_t bg=0 ) = 0;
|
||||||
|
virtual void drawQS(uint8_t x, uint8_t y, uint8_t len, uint8_t size, uint8_t *stat, uint16_t fg=0xffff, uint16_t bg=0) = 0;
|
||||||
|
};
|
||||||
|
|
||||||
|
class U8x8Display : public RawDisplay {
|
||||||
|
private:
|
||||||
|
U8X8 *u8x8 = NULL; // initialize later after reading config file
|
||||||
|
int _type;
|
||||||
|
const uint8_t **fontlist;
|
||||||
|
int nfonts;
|
||||||
|
|
||||||
|
public:
|
||||||
|
U8x8Display(int type = 0) { _type = type; }
|
||||||
|
void begin();
|
||||||
|
void clear();
|
||||||
|
void setFont(uint8_t fontindex);
|
||||||
|
void getDispSize(uint8_t *height, uint8_t *width, uint8_t *lineskip, uint8_t *colskip);
|
||||||
|
void drawString(uint8_t x, uint8_t y, const char *s, int16_t width=WIDTH_AUTO, uint16_t fg=0xffff, uint16_t bg=0);
|
||||||
|
void drawTile(uint8_t x, uint8_t y, uint8_t cnt, uint8_t *tile_ptr);
|
||||||
|
void drawTriangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t x3, uint16_t y3, uint16_t color, bool fill);
|
||||||
|
void drawBitmap(uint16_t x1, uint16_t y1, const uint16_t* bitmap, int16_t w, int16_t h);
|
||||||
|
void welcome();
|
||||||
|
void drawIP(uint8_t x, uint8_t y, int16_t width=WIDTH_AUTO, uint16_t fg=0xffff, uint16_t bg=0);
|
||||||
|
void drawQS(uint8_t x, uint8_t y, uint8_t len, uint8_t size, uint8_t *stat, uint16_t fg=0xffff, uint16_t bg=0);
|
||||||
|
};
|
||||||
|
|
||||||
|
class Display {
|
||||||
|
private:
|
||||||
|
void replaceLayouts(DispInfo *newlayout, int nnew);
|
||||||
|
int allocDispInfo(int entries, DispInfo *d, char *label);
|
||||||
|
void parseDispElement(char *text, DispEntry *de);
|
||||||
|
int xscale=13, yscale=22;
|
||||||
|
int fontsma=0, fontlar=1;
|
||||||
|
uint16_t colfg, colbg;
|
||||||
|
static void circ(int x, int y);
|
||||||
|
static int countEntries(File f);
|
||||||
|
void calcGPS();
|
||||||
|
boolean gpsValid;
|
||||||
|
float gpsLat, gpsLon;
|
||||||
|
int gpsAlt;
|
||||||
|
int gpsDist; // -1: invalid
|
||||||
|
int gpsCourse, gpsDir, gpsBear; // 0..360; -1: invalid
|
||||||
|
boolean gpsCourseOld;
|
||||||
|
static const int LINEBUFLEN{ 255 };
|
||||||
|
static char lineBuf[LINEBUFLEN];
|
||||||
|
static const char *trim(char *s) {
|
||||||
|
char *ret = s;
|
||||||
|
while(*ret && isspace(*ret)) { ret++; }
|
||||||
|
int lastidx;
|
||||||
|
while(1) {
|
||||||
|
lastidx = strlen(ret)-1;
|
||||||
|
if(lastidx>=0 && isspace(ret[lastidx]))
|
||||||
|
ret[lastidx] = 0;
|
||||||
|
else
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
public:
|
||||||
|
void initFromFile();
|
||||||
|
|
||||||
|
int layoutIdx;
|
||||||
|
DispInfo *layout;
|
||||||
|
|
||||||
|
DispInfo *layouts;
|
||||||
|
int nLayouts;
|
||||||
|
static RawDisplay *rdis;
|
||||||
|
|
||||||
|
Display();
|
||||||
|
void init();
|
||||||
|
static char buf[17];
|
||||||
|
static void drawLat(DispEntry *de);
|
||||||
|
static void drawLon(DispEntry *de);
|
||||||
|
static void drawAz(DispEntry *de);
|
||||||
|
static void drawVBat(DispEntry *de);
|
||||||
|
static void drawAlt(DispEntry *de);
|
||||||
|
static void drawHS(DispEntry *de);
|
||||||
|
static void drawVS(DispEntry *de);
|
||||||
|
static void drawID(DispEntry *de);
|
||||||
|
static void drawRSSI(DispEntry *de);
|
||||||
|
static void drawQS(DispEntry *de);
|
||||||
|
static void drawType(DispEntry *de);
|
||||||
|
static void drawFreq(DispEntry *de);
|
||||||
|
static void drawAFC(DispEntry *de);
|
||||||
|
static void drawIP(DispEntry *de);
|
||||||
|
static void drawSite(DispEntry *de);
|
||||||
|
static void drawTelemetry(DispEntry *de);
|
||||||
|
static void drawKilltimer(DispEntry *de);
|
||||||
|
static void drawGPS(DispEntry *de);
|
||||||
|
static void drawText(DispEntry *de);
|
||||||
|
static void drawBatt(DispEntry *de);
|
||||||
|
static void drawString(DispEntry *de, const char *str);
|
||||||
|
void clearIP();
|
||||||
|
void setIP(const char *ip, bool AP);
|
||||||
|
void updateDisplayPos();
|
||||||
|
void updateDisplayPos2();
|
||||||
|
void updateDisplayAz();
|
||||||
|
void updateDisplayVBat();
|
||||||
|
void updateDisplayID();
|
||||||
|
void updateDisplayRSSI();
|
||||||
|
void updateStat();
|
||||||
|
void updateDisplayRXConfig();
|
||||||
|
void updateDisplayIP();
|
||||||
|
void updateDisplay();
|
||||||
|
void updateDisplayVBatt();
|
||||||
|
|
||||||
|
void setLayout(int layout);
|
||||||
|
};
|
||||||
|
|
||||||
|
extern Display disp;
|
||||||
|
|
||||||
|
#endif
|
||||||
529
libraries/SondeLib/M10.cpp
Executable file
529
libraries/SondeLib/M10.cpp
Executable file
|
|
@ -0,0 +1,529 @@
|
||||||
|
|
||||||
|
/* M10 decoder functions */
|
||||||
|
#include "M10.h"
|
||||||
|
#include "SX1278FSK.h"
|
||||||
|
#include "rsc.h"
|
||||||
|
#include "Sonde.h"
|
||||||
|
#include <SPIFFS.h>
|
||||||
|
|
||||||
|
// well...
|
||||||
|
//#include "rs92gps.h"
|
||||||
|
|
||||||
|
#define M10_DEBUG 1
|
||||||
|
|
||||||
|
#if M10_DEBUG
|
||||||
|
#define M10_DBG(x) x
|
||||||
|
#else
|
||||||
|
#define M10_DBG(x)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
static byte data1[512];
|
||||||
|
static byte *dataptr=data1;
|
||||||
|
|
||||||
|
static uint8_t rxbitc;
|
||||||
|
static uint16_t rxbyte;
|
||||||
|
static int rxp=0;
|
||||||
|
static int haveNewFrame = 0;
|
||||||
|
static int lastFrame = 0;
|
||||||
|
static int headerDetected = 0;
|
||||||
|
|
||||||
|
int M10::setup(float frequency)
|
||||||
|
{
|
||||||
|
#if M10_DEBUG
|
||||||
|
Serial.println("Setup sx1278 for M10 sonde");
|
||||||
|
#endif
|
||||||
|
//if(!initialized) {
|
||||||
|
//Gencrctab();
|
||||||
|
//initrsc();
|
||||||
|
// not here for now.... get_eph("/brdc.19n");
|
||||||
|
// initialized = true;
|
||||||
|
//}
|
||||||
|
|
||||||
|
if(sx1278.ON()!=0) {
|
||||||
|
M10_DBG(Serial.println("Setting SX1278 power on FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
if(sx1278.setFSK()!=0) {
|
||||||
|
M10_DBG(Serial.println("Setting FSJ mode FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
if(sx1278.setBitrate(9600)!=0) {
|
||||||
|
M10_DBG(Serial.println("Setting bitrate 9600bit/s FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
#if M10_DEBUG
|
||||||
|
float br = sx1278.getBitrate();
|
||||||
|
Serial.print("Exact bitrate is ");
|
||||||
|
Serial.println(br);
|
||||||
|
#endif
|
||||||
|
if(sx1278.setAFCBandwidth(sonde.config.rs92.rxbw)!=0) {
|
||||||
|
M10_DBG(Serial.printf("Setting AFC bandwidth %d Hz FAILED", sonde.config.rs92.rxbw));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
if(sx1278.setRxBandwidth(sonde.config.rs92.rxbw)!=0) {
|
||||||
|
M10_DBG(Serial.printf("Setting RX bandwidth to %d Hz FAILED", sonde.config.rs92.rxbw));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Enable auto-AFC, auto-AGC, RX Trigger by preamble
|
||||||
|
if(sx1278.setRxConf(0x1E)!=0) {
|
||||||
|
M10_DBG(Serial.println("Setting RX Config FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
// Set autostart_RX to 01, preamble 0, SYNC detect==on, syncsize=3 (==4 byte
|
||||||
|
//char header[] = "0110.0101 0110.0110 1010.0101 1010.1010";
|
||||||
|
|
||||||
|
//const char *SYNC="\x10\xB6\xCA\x11\x22\x96\x12\xF8";
|
||||||
|
//const char *SYNC="\x08\x6D\x53\x88\x44\x69\x48\x1F";
|
||||||
|
// was 0x57
|
||||||
|
//const char *SYNC="\x99\x9A";
|
||||||
|
#if 1
|
||||||
|
// version 1, working with continuous RX
|
||||||
|
const char *SYNC="\x66\x65";
|
||||||
|
if(sx1278.setSyncConf(0x70, 2, (const uint8_t *)SYNC)!=0) {
|
||||||
|
M10_DBG(Serial.println("Setting SYNC Config FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
//if(sx1278.setPreambleDetect(0xA8)!=0) {
|
||||||
|
if(sx1278.setPreambleDetect(0x9F)!=0) {
|
||||||
|
M10_DBG(Serial.println("Setting PreambleDetect FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#if 0
|
||||||
|
// version 2, with per-packet rx start, untested
|
||||||
|
// header is 2a 10 65, i.e. with lsb first
|
||||||
|
// 0 0101 0100 1 0 0000 1000 1 0 1010 0110 1
|
||||||
|
// 10 10011001 10011010 01 10 10101010 01101010 01 10 01100110 10010110 01
|
||||||
|
// preamble 0x6A 0x66 0x6A
|
||||||
|
// i.e. preamble detector on (0x80), preamble detector size 1 (0x00), preample chip errors??? (0x0A)
|
||||||
|
// after 2a2a2a2a2a1065
|
||||||
|
if(sx1278.setPreambleDetect(0xA8)!=0) {
|
||||||
|
M10_DBG(Serial.println("Setting PreambleDetect FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
// sync config: ato restart (01), preamble polarity AA (0), sync on (1), resevered (0), syncsize 2+1 (010) => 0x52
|
||||||
|
const char *SYNC="\x6A\x66\x69";
|
||||||
|
if(sx1278.setSyncConf(0x52, 3, (const uint8_t *)SYNC)!=0) {
|
||||||
|
M10_DBG(Serial.println("Setting SYNC Config FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
// payload length is ((240 - 7)*10 +6)/8 = 292
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Packet config 1: fixed len, no mancecer, no crc, no address filter
|
||||||
|
// Packet config 2: packet mode, no home ctrl, no beackn, msb(packetlen)=0)
|
||||||
|
if(sx1278.setPacketConfig(0x08, 0x40)!=0) {
|
||||||
|
M10_DBG(Serial.println("Setting Packet config FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
Serial.print("M10: setting RX frequency to ");
|
||||||
|
Serial.println(frequency);
|
||||||
|
int res = sx1278.setFrequency(frequency);
|
||||||
|
// enable RX
|
||||||
|
sx1278.setPayloadLength(0); // infinite for now...
|
||||||
|
//sx1278.setPayloadLength(292);
|
||||||
|
sx1278.writeRegister(REG_OP_MODE, FSK_RX_MODE);
|
||||||
|
|
||||||
|
#if M10_DEBUG
|
||||||
|
M10_DBG(Serial.println("Setting SX1278 config for M10 finished\n"); Serial.println());
|
||||||
|
#endif
|
||||||
|
return res;
|
||||||
|
}
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
int M10::setFrequency(float frequency) {
|
||||||
|
Serial.print("M10: setting RX frequency to ");
|
||||||
|
Serial.println(frequency);
|
||||||
|
int res = sx1278.setFrequency(frequency);
|
||||||
|
// enable RX
|
||||||
|
sx1278.setPayloadLength(0); // infinite for now...
|
||||||
|
|
||||||
|
sx1278.writeRegister(REG_OP_MODE, FSK_RX_MODE);
|
||||||
|
return res;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
uint32_t M10::bits2val(const uint8_t *bits, int len) {
|
||||||
|
uint32_t val = 0;
|
||||||
|
for (int j = 0; j < len; j++) {
|
||||||
|
val |= (bits[j] << (len-1-j));
|
||||||
|
}
|
||||||
|
return val;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
M10::M10() {
|
||||||
|
}
|
||||||
|
|
||||||
|
#define M10_FRAMELEN 101
|
||||||
|
#define M10_CRCPOS 99
|
||||||
|
|
||||||
|
void M10::printRaw(uint8_t *data, int len)
|
||||||
|
{
|
||||||
|
char buf[3];
|
||||||
|
int i;
|
||||||
|
for(i=0; i<len; i++) {
|
||||||
|
snprintf(buf, 3, "%02X ", data[i]);
|
||||||
|
Serial.print(buf);
|
||||||
|
}
|
||||||
|
Serial.println();
|
||||||
|
}
|
||||||
|
|
||||||
|
static int update_checkM10(int c, uint8_t b) {
|
||||||
|
int c0, c1, t, t6, t7, s;
|
||||||
|
c1 = c & 0xFF;
|
||||||
|
// B
|
||||||
|
b = (b >> 1) | ((b & 1) << 7);
|
||||||
|
b ^= (b >> 2) & 0xFF;
|
||||||
|
// A1
|
||||||
|
t6 = ( c & 1) ^ ((c >> 2) & 1) ^ ((c >> 4) & 1);
|
||||||
|
t7 = ((c >> 1) & 1) ^ ((c >> 3) & 1) ^ ((c >> 5) & 1);
|
||||||
|
t = (c & 0x3F) | (t6 << 6) | (t7 << 7);
|
||||||
|
// A2
|
||||||
|
s = (c >> 7) & 0xFF;
|
||||||
|
s ^= (s >> 2) & 0xFF;
|
||||||
|
c0 = b ^ t ^ s;
|
||||||
|
return ((c1 << 8) | c0) & 0xFFFF;
|
||||||
|
}
|
||||||
|
static bool checkM10crc(uint8_t *msg) {
|
||||||
|
int i, cs, cs1;
|
||||||
|
cs = 0;
|
||||||
|
for (i = 0; i < M10_CRCPOS; i++) {
|
||||||
|
cs = update_checkM10(cs, msg[i]);
|
||||||
|
}
|
||||||
|
cs = cs & 0xFFFF;
|
||||||
|
cs1 = (msg[M10_CRCPOS] << 8) | msg[M10_CRCPOS+1];
|
||||||
|
return (cs1 == cs);
|
||||||
|
}
|
||||||
|
|
||||||
|
typedef uint32_t SET256[8];
|
||||||
|
static SET256 sondeudp_VARSET = {0x03BBBBF0UL,0x80600000UL,0x06A001A0UL,
|
||||||
|
0x0000001CUL,0x00000000UL,0x00000000UL,0x00000000UL,
|
||||||
|
0x00000000UL};
|
||||||
|
// VARSET=SET256{4..9,11..13,15..17,19..21,23..25,53..54,63,69,71,72,85,87,89,90,98..100};
|
||||||
|
|
||||||
|
static uint8_t fixcnt[M10_FRAMELEN];
|
||||||
|
static uint8_t fixbytes[M10_FRAMELEN];
|
||||||
|
|
||||||
|
static int32_t getint32(uint8_t *data) {
|
||||||
|
return (int32_t)( data[3]|(data[2]<<8)|(data[1]<<16)|(data[0]<<24) );
|
||||||
|
}
|
||||||
|
static int16_t getint16(uint8_t *data) {
|
||||||
|
return (int16_t)(data[1]|((uint16_t)data[0]<<8));
|
||||||
|
}
|
||||||
|
|
||||||
|
static char dez(uint8_t nr) {
|
||||||
|
nr = nr%10;
|
||||||
|
return '0'+nr;
|
||||||
|
}
|
||||||
|
static char hex(uint8_t nr) {
|
||||||
|
nr = nr&0x0f;
|
||||||
|
if(nr<10) return '0'+nr;
|
||||||
|
else return 'A'+nr-10;
|
||||||
|
}
|
||||||
|
const static float DEGMUL = 1.0/0xB60B60;
|
||||||
|
#define VMUL 0.005
|
||||||
|
#ifndef PI
|
||||||
|
#define PI (3.1415926535897932384626433832795)
|
||||||
|
#endif
|
||||||
|
#define RAD (PI/180)
|
||||||
|
|
||||||
|
|
||||||
|
// ret: 1=frame ok; 2=frame with errors; 0=ignored frame (m10dop-alternativ)
|
||||||
|
int M10::decodeframeM10(uint8_t *data) {
|
||||||
|
int repairstep = 16;
|
||||||
|
int repl = 0;
|
||||||
|
bool crcok;
|
||||||
|
// error correction, inspired by oe5dxl's sondeudp
|
||||||
|
do {
|
||||||
|
crcok = checkM10crc(data);
|
||||||
|
if(crcok) break;
|
||||||
|
repl = 0;
|
||||||
|
for(int i=0; i<M10_CRCPOS; i++) {
|
||||||
|
if( ((sondeudp_VARSET[i/32]&(1<<(i%32))) != 1) && (fixcnt[i]>=repairstep) ) {
|
||||||
|
repl++;
|
||||||
|
data[i] = fixbytes[i];
|
||||||
|
}
|
||||||
|
}
|
||||||
|
repairstep >>= 1;
|
||||||
|
} while(repairstep>0);
|
||||||
|
if(crcok) {
|
||||||
|
for(int i=0; i<M10_CRCPOS; i++) {
|
||||||
|
if(fixbytes[i]==data[i] &&fixcnt[i]<255) fixcnt[i]++;
|
||||||
|
else { fixcnt[i]=0; fixbytes[i]=data[i]; }
|
||||||
|
}
|
||||||
|
}
|
||||||
|
Serial.println(crcok?"CRC OK":"CRC NOT OK");
|
||||||
|
|
||||||
|
if(data[1]==0x9F && data[2]==0x20) {
|
||||||
|
Serial.println("Decoding...");
|
||||||
|
// Its a M10
|
||||||
|
// getid...
|
||||||
|
char ids[11];
|
||||||
|
ids[0] = 'M';
|
||||||
|
ids[1] = 'E';
|
||||||
|
ids[2] = hex(data[95]/16);
|
||||||
|
ids[3] = hex(data[95]);
|
||||||
|
ids[4] = hex(data[93]);
|
||||||
|
uint32_t id = data[96] + data[97]*256;
|
||||||
|
ids[5] = hex(id/4096);
|
||||||
|
ids[6] = hex(id/256);
|
||||||
|
ids[7] = hex(id/16);
|
||||||
|
ids[8] = hex(id);
|
||||||
|
ids[9] = 0;
|
||||||
|
strncpy(sonde.si()->id, ids, 10);
|
||||||
|
ids[0] = hex(data[95]/16);
|
||||||
|
ids[1] = dez((data[95]&0x0f)/10);
|
||||||
|
ids[2] = dez((data[95]&0x0f));
|
||||||
|
ids[3] = dez(data[93]);
|
||||||
|
ids[4] = dez(id>>13);
|
||||||
|
id &= 0x1fff;
|
||||||
|
ids[5] = dez(id/1000);
|
||||||
|
ids[6] = dez((id/100)%10);
|
||||||
|
ids[7] = dez((id/10)%10);
|
||||||
|
ids[8] = dez(id%10);
|
||||||
|
strncpy(sonde.si()->ser, ids, 10);
|
||||||
|
sonde.si()->validID = true;
|
||||||
|
Serial.printf("ID is %s [%02x %02x %d]\n", ids, data[95], data[93], id);
|
||||||
|
// ID printed on sonde is ...-.-abbbb, with a=id>>13, bbbb=id&0x1fff in decimal
|
||||||
|
// position data
|
||||||
|
sonde.si()->lat = getint32(data+14) * DEGMUL;
|
||||||
|
sonde.si()->lon = getint32(data+18) * DEGMUL;
|
||||||
|
sonde.si()->alt = getint32(data+22) * 0.001;
|
||||||
|
float ve = getint16(data+4)*VMUL;
|
||||||
|
float vn = getint16(data+6)*VMUL;
|
||||||
|
sonde.si()->vs = getint16(data+8) * VMUL;
|
||||||
|
sonde.si()->hs = sqrt(ve*ve+vn*vn);
|
||||||
|
float dir = atan2(vn, ve)*(1.0/RAD);
|
||||||
|
if(dir<0) dir+=360;
|
||||||
|
sonde.si()->dir = dir;
|
||||||
|
sonde.si()->validPos = 0x3f;
|
||||||
|
|
||||||
|
uint32_t gpstime = getint32(data+10);
|
||||||
|
uint16_t gpsweek = getint16(data+32);
|
||||||
|
// UTC is GPSTIME - 18s (24*60*60-18 = 86382)
|
||||||
|
// one week = 7*24*60*60 = 604800 seconds
|
||||||
|
// unix epoch starts jan 1st 1970 0:00
|
||||||
|
// gps time starts jan 6, 1980 0:00. thats 315964800 epoch seconds.
|
||||||
|
// subtracting 86400 yields 315878400UL
|
||||||
|
sonde.si()->time = (gpstime/1000) + 86382 + gpsweek*604800 + 315878400UL;
|
||||||
|
sonde.si()->validTime = true;
|
||||||
|
} else {
|
||||||
|
Serial.printf("data is %02x %02x %02x\n", data[0], data[1], data[2]);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
return crcok?1:2;
|
||||||
|
}
|
||||||
|
|
||||||
|
static uint32_t rxdata;
|
||||||
|
static bool rxsearching=true;
|
||||||
|
|
||||||
|
// search for
|
||||||
|
// //101001100110011010011010011001100110100110101010100110101001
|
||||||
|
// //1010011001100110100110100110 0110.0110 1001.1010 1010.1001 1010.1001 => 0x669AA9A9
|
||||||
|
void M10::processM10data(uint8_t dt)
|
||||||
|
{
|
||||||
|
for(int i=0; i<8; i++) {
|
||||||
|
uint8_t d = (dt&0x80)?1:0;
|
||||||
|
dt <<= 1;
|
||||||
|
rxdata = (rxdata<<1) | d;
|
||||||
|
//uint8_t value = ((rxdata>>1)^rxdata)&0x01;
|
||||||
|
//if((rxbitc&1)==1) { rxbyte = (rxbyte>>1) + ((value)<<8); } // mancester decoded data
|
||||||
|
//rxbyte = (rxbyte>>1) | (d<<8);
|
||||||
|
if( (rxbitc&1)==0 ) {
|
||||||
|
// "bit1"
|
||||||
|
rxbyte = (rxbyte<<1) | d;
|
||||||
|
} else {
|
||||||
|
// "bit2" ==> 01 or 10 => 1, otherweise => 0
|
||||||
|
rxbyte = rxbyte ^ d;
|
||||||
|
}
|
||||||
|
//
|
||||||
|
if(rxsearching) {
|
||||||
|
if( rxdata == 0xcccca64c || rxdata == 0x333359b3 ) {
|
||||||
|
rxsearching = false;
|
||||||
|
rxbitc = 0;
|
||||||
|
rxp = 0;
|
||||||
|
#if 1
|
||||||
|
int rssi=sx1278.getRSSI();
|
||||||
|
int fei=sx1278.getFEI();
|
||||||
|
int afc=sx1278.getAFC();
|
||||||
|
Serial.print("Test: RSSI="); Serial.print(rssi);
|
||||||
|
Serial.print(" FEI="); Serial.print(fei);
|
||||||
|
Serial.print(" AFC="); Serial.println(afc);
|
||||||
|
sonde.si()->rssi = rssi;
|
||||||
|
sonde.si()->afc = afc;
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
rxbitc = (rxbitc+1)%16; // 16;
|
||||||
|
if(rxbitc == 0) { // got 8 data bit
|
||||||
|
//Serial.printf("%03x ",rxbyte);
|
||||||
|
dataptr[rxp++] = rxbyte&0xff; // (rxbyte>>1)&0xff;
|
||||||
|
#if 0
|
||||||
|
if(rxp==7 && dataptr[6] != 0x65) {
|
||||||
|
Serial.printf("wrong start: %02x\n",dataptr[6]);
|
||||||
|
rxsearching = true;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
if(rxp>=M10_FRAMELEN) {
|
||||||
|
rxsearching = true;
|
||||||
|
haveNewFrame = decodeframeM10(dataptr);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
int M10::receive() {
|
||||||
|
unsigned long t0 = millis();
|
||||||
|
Serial.printf("M10::receive() start at %ld\n",t0);
|
||||||
|
while( millis() - t0 < 1000 ) {
|
||||||
|
uint8_t value = sx1278.readRegister(REG_IRQ_FLAGS2);
|
||||||
|
if ( bitRead(value, 7) ) {
|
||||||
|
Serial.println("FIFO full");
|
||||||
|
}
|
||||||
|
if ( bitRead(value, 4) ) {
|
||||||
|
Serial.println("FIFO overflow");
|
||||||
|
}
|
||||||
|
if ( bitRead(value, 2) == 1 ) {
|
||||||
|
Serial.println("FIFO: ready()");
|
||||||
|
sx1278.clearIRQFlags();
|
||||||
|
}
|
||||||
|
if(bitRead(value, 6) == 0) { // while FIFO not empty
|
||||||
|
byte data = sx1278.readRegister(REG_FIFO);
|
||||||
|
//Serial.printf("%02x",data);
|
||||||
|
processM10data(data);
|
||||||
|
value = sx1278.readRegister(REG_IRQ_FLAGS2);
|
||||||
|
} else {
|
||||||
|
if(headerDetected) {
|
||||||
|
t0 = millis(); // restart timer... don't time out if header detected...
|
||||||
|
headerDetected = 0;
|
||||||
|
}
|
||||||
|
if(haveNewFrame) {
|
||||||
|
Serial.printf("M10::receive(): new frame complete after %ldms\n", millis()-t0);
|
||||||
|
printRaw(dataptr, M10_FRAMELEN);
|
||||||
|
int retval = haveNewFrame==1 ? RX_OK: RX_ERROR;
|
||||||
|
haveNewFrame = 0;
|
||||||
|
return retval;
|
||||||
|
}
|
||||||
|
delay(2);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
Serial.printf("M10::receive() timed out\n");
|
||||||
|
return RX_TIMEOUT; // TODO RX_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
#define M10MAXLEN (240)
|
||||||
|
int M10::waitRXcomplete() {
|
||||||
|
// called after complete...
|
||||||
|
#if 0
|
||||||
|
Serial.printf("decoding frame %d\n", lastFrame);
|
||||||
|
print_frame(lastFrame==1?data1:data2, 240);
|
||||||
|
SondeInfo *si = sonde.sondeList+rxtask.receiveSonde;
|
||||||
|
si->lat = gpx.lat;
|
||||||
|
si->lon = gpx.lon;
|
||||||
|
si->alt = gpx.alt;
|
||||||
|
si->vs = gpx.vU;
|
||||||
|
si->hs = gpx.vH;
|
||||||
|
si->dir = gpx.vD;
|
||||||
|
si->validPos = 0x3f;
|
||||||
|
memcpy(si->id, gpx.id, 9);
|
||||||
|
si->validID = true;
|
||||||
|
|
||||||
|
int res=0;
|
||||||
|
uint32_t t0 = millis();
|
||||||
|
while( rxtask.receiveResult == 0xFFFF && millis()-t0 < 2000) { delay(20); }
|
||||||
|
|
||||||
|
if( rxtask.receiveResult<0 || rxtask.receiveResult==RX_TIMEOUT) {
|
||||||
|
res = RX_TIMEOUT;
|
||||||
|
} else if ( rxtask.receiveResult==0) {
|
||||||
|
res = RX_OK;
|
||||||
|
} else {
|
||||||
|
res = RX_ERROR;
|
||||||
|
}
|
||||||
|
rxtask.receiveResult = 0xFFFF;
|
||||||
|
Serial.printf("M10::waitRXcomplete returning %d (%s)\n", res, RXstr[res]);
|
||||||
|
return res;
|
||||||
|
#endif
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
int oldwaitRXcomplete() {
|
||||||
|
Serial.println("M10: receive frame...\n");
|
||||||
|
sx1278receiveData = true;
|
||||||
|
delay(6000); // done in other task....
|
||||||
|
//sx1278receiveData = false;
|
||||||
|
#if 0
|
||||||
|
//sx1278.setPayloadLength(518-8); // Expect 320-8 bytes or 518-8 bytes (8 byte header)
|
||||||
|
//sx1278.setPayloadLength(0); // infinite for now...
|
||||||
|
|
||||||
|
////// test code for continuous reception
|
||||||
|
// sx1278.receive(); /// active FSK RX mode -- already done above...
|
||||||
|
uint8_t value = sx1278.readRegister(REG_IRQ_FLAGS2);
|
||||||
|
unsigned long previous = millis();
|
||||||
|
|
||||||
|
byte ready=0;
|
||||||
|
uint32_t wait = 8000;
|
||||||
|
// while not yet done or FIFO not yet empty
|
||||||
|
// bit 6: FIFO Empty
|
||||||
|
// bit 2 payload ready
|
||||||
|
int by=0;
|
||||||
|
while( (!ready || bitRead(value,6)==0) && (millis() - previous < wait) )
|
||||||
|
{
|
||||||
|
if( bitRead(value, 7) ) { Serial.println("FIFO full"); }
|
||||||
|
if( bitRead(value, 4) ) { Serial.println("FIFO overflow"); }
|
||||||
|
if( bitRead(value,2)==1 ) ready=1;
|
||||||
|
if( bitRead(value, 6) == 0 ) { // FIFO not empty
|
||||||
|
byte data = sx1278.readRegister(REG_FIFO);
|
||||||
|
process8N1data(data);
|
||||||
|
by++;
|
||||||
|
#if 0
|
||||||
|
if(di==1) {
|
||||||
|
int rssi=getRSSI();
|
||||||
|
int fei=getFEI();
|
||||||
|
int afc=getAFC();
|
||||||
|
Serial.print("Test: RSSI="); Serial.println(rssi);
|
||||||
|
Serial.print("Test: FEI="); Serial.println(fei);
|
||||||
|
Serial.print("Test: AFC="); Serial.println(afc);
|
||||||
|
sonde.si()->rssi = rssi;
|
||||||
|
sonde.si()->afc = afc;
|
||||||
|
}
|
||||||
|
if(di>520) {
|
||||||
|
// TODO
|
||||||
|
Serial.println("TOO MUCH DATA");
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
previous = millis(); // reset timeout after receiving data
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
value = sx1278.readRegister(REG_IRQ_FLAGS2);
|
||||||
|
}
|
||||||
|
Serial.printf("processed %d bytes before end/timeout\n", by);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/////
|
||||||
|
#if 0
|
||||||
|
int e = sx1278.receivePacketTimeout(1000, data+8);
|
||||||
|
if(e) { Serial.println("TIMEOUT"); return RX_TIMEOUT; } //if timeout... return 1
|
||||||
|
|
||||||
|
printRaw(data, M10MAXLEN);
|
||||||
|
//for(int i=0; i<M10MAXLEN; i++) { data[i] = reverse(data[i]); }
|
||||||
|
//printRaw(data, MAXLEN);
|
||||||
|
//for(int i=0; i<M10MAXLEN; i++) { data[i] = data[i] ^ scramble[i&0x3F]; }
|
||||||
|
//printRaw(data, MAXLEN);
|
||||||
|
//int res = decode41(data, M10MAXLEN);
|
||||||
|
#endif
|
||||||
|
int res=0;
|
||||||
|
return res==0 ? RX_OK : RX_ERROR;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
M10 m10 = M10();
|
||||||
96
libraries/SondeLib/M10.h
Executable file
96
libraries/SondeLib/M10.h
Executable file
|
|
@ -0,0 +1,96 @@
|
||||||
|
/*
|
||||||
|
* M10.h
|
||||||
|
* Functions for decoding Meteomodem M10 sondes with SX127x chips
|
||||||
|
* Copyright (C) 2019 Hansi Reiser, dl9rdz
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef M10_h
|
||||||
|
#define M10_h
|
||||||
|
|
||||||
|
#include <stdlib.h>
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <Arduino.h>
|
||||||
|
#ifndef inttypes_h
|
||||||
|
#include <inttypes.h>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
struct CONTEXTR9 {
|
||||||
|
char calibdata[512];
|
||||||
|
uint32_t calibok;
|
||||||
|
char mesok;
|
||||||
|
char posok;
|
||||||
|
char framesent;
|
||||||
|
double lat;
|
||||||
|
double lon;
|
||||||
|
double heig;
|
||||||
|
double speed;
|
||||||
|
double dir;
|
||||||
|
double climb;
|
||||||
|
double lastlat;
|
||||||
|
double laslong;
|
||||||
|
double lastalt;
|
||||||
|
double lastspeed;
|
||||||
|
double lastdir;
|
||||||
|
double lastclb;
|
||||||
|
float hrmsc;
|
||||||
|
float vrmsc;
|
||||||
|
double hp;
|
||||||
|
double hyg;
|
||||||
|
double temp;
|
||||||
|
double ozontemp;
|
||||||
|
double ozon;
|
||||||
|
uint32_t goodsats;
|
||||||
|
uint32_t timems;
|
||||||
|
uint32_t framenum;
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Main class */
|
||||||
|
class M10
|
||||||
|
{
|
||||||
|
private:
|
||||||
|
void printRaw(uint8_t *data, int len);
|
||||||
|
void processM10data(uint8_t data);
|
||||||
|
int decodeframeM10(uint8_t *data);
|
||||||
|
#if 0
|
||||||
|
void stobyte92(uint8_t byte);
|
||||||
|
void dogps(const uint8_t *sf, int sf_len,
|
||||||
|
struct CONTEXTR9 * cont, uint32_t * timems,
|
||||||
|
uint32_t * gpstime);
|
||||||
|
uint32_t bits2val(const uint8_t *bits, int len);
|
||||||
|
int bitsToBytes(uint8_t *bits, uint8_t *bytes, int len);
|
||||||
|
int decode92(byte *data, int maxlen);
|
||||||
|
|
||||||
|
uint8_t hamming_conf[ 7*8]; // 7*8=56
|
||||||
|
uint8_t hamming_dat1[13*8]; // 13*8=104
|
||||||
|
uint8_t hamming_dat2[13*8];
|
||||||
|
|
||||||
|
uint8_t block_conf[ 7*4]; // 7*4=28
|
||||||
|
uint8_t block_dat1[13*4]; // 13*4=52
|
||||||
|
uint8_t block_dat2[13*4];
|
||||||
|
|
||||||
|
uint8_t H[4][8] = // extended Hamming(8,4) particy check matrix
|
||||||
|
{{ 0, 1, 1, 1, 1, 0, 0, 0},
|
||||||
|
{ 1, 0, 1, 1, 0, 1, 0, 0},
|
||||||
|
{ 1, 1, 0, 1, 0, 0, 1, 0},
|
||||||
|
{ 1, 1, 1, 0, 0, 0, 0, 1}};
|
||||||
|
uint8_t He[8] = { 0x7, 0xB, 0xD, 0xE, 0x8, 0x4, 0x2, 0x1}; // Spalten von H:
|
||||||
|
// 1-bit-error-Syndrome
|
||||||
|
boolean initialized = false;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
public:
|
||||||
|
M10();
|
||||||
|
int setup(float frequency);
|
||||||
|
int receive();
|
||||||
|
int waitRXcomplete();
|
||||||
|
|
||||||
|
//int use_ecc = 1;
|
||||||
|
};
|
||||||
|
|
||||||
|
extern M10 m10;
|
||||||
|
|
||||||
|
#endif
|
||||||
556
libraries/SondeLib/RS41.cpp
Executable file
556
libraries/SondeLib/RS41.cpp
Executable file
|
|
@ -0,0 +1,556 @@
|
||||||
|
|
||||||
|
/* RS41 decoder functions */
|
||||||
|
#include "RS41.h"
|
||||||
|
#include "SX1278FSK.h"
|
||||||
|
#include "rsc.h"
|
||||||
|
#include "Sonde.h"
|
||||||
|
|
||||||
|
#define RS41_DEBUG 0
|
||||||
|
|
||||||
|
#if RS41_DEBUG
|
||||||
|
#define RS41_DBG(x) x
|
||||||
|
#else
|
||||||
|
#define RS41_DBG(x)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define RS41MAXLEN (320)
|
||||||
|
static byte data[800];
|
||||||
|
static int dpos = 0;
|
||||||
|
|
||||||
|
static uint16_t CRCTAB[256];
|
||||||
|
|
||||||
|
#define X2C_DIVR(a, b) ((b) != 0.0f ? (a)/(b) : (a))
|
||||||
|
#define X2C_DIVL(a, b) ((a)/(b))
|
||||||
|
static uint32_t X2C_LSH(uint32_t a, int32_t length, int32_t n)
|
||||||
|
{
|
||||||
|
uint32_t m;
|
||||||
|
|
||||||
|
m = 0;
|
||||||
|
m = (length == 32) ? 0xFFFFFFFFl : (1 << length) - 1;
|
||||||
|
if (n > 0) {
|
||||||
|
if (n >= (int32_t)length)
|
||||||
|
return 0;
|
||||||
|
return (a << n) & m;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (n <= (int32_t)-length)
|
||||||
|
return 0;
|
||||||
|
return (a >> -n) & m;
|
||||||
|
}
|
||||||
|
|
||||||
|
static double atang2(double x, double y)
|
||||||
|
{
|
||||||
|
double w;
|
||||||
|
if (fabs(x)>fabs(y)) {
|
||||||
|
w = (double)atan((float)(X2C_DIVL(y,x)));
|
||||||
|
if (x<0.0) {
|
||||||
|
if (y>0.0) w = 3.1415926535898+w;
|
||||||
|
else w = w-3.1415926535898;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
else if (y!=0.0) {
|
||||||
|
w = (double)(1.5707963267949f-atan((float)(X2C_DIVL(x,
|
||||||
|
y))));
|
||||||
|
if (y<0.0) w = w-3.1415926535898;
|
||||||
|
}
|
||||||
|
else w = 0.0;
|
||||||
|
return w;
|
||||||
|
} /* end atang2() */
|
||||||
|
|
||||||
|
|
||||||
|
static void Gencrctab(void)
|
||||||
|
{
|
||||||
|
uint16_t j;
|
||||||
|
uint16_t i;
|
||||||
|
uint16_t crc;
|
||||||
|
for (i = 0U; i<=255U; i++) {
|
||||||
|
crc = (uint16_t)(i*256U);
|
||||||
|
for (j = 0U; j<=7U; j++) {
|
||||||
|
if ((0x8000U & crc)) crc = X2C_LSH(crc,16,1)^0x1021U;
|
||||||
|
else crc = X2C_LSH(crc,16,1);
|
||||||
|
} /* end for */
|
||||||
|
CRCTAB[i] = X2C_LSH(crc,16,-8)|X2C_LSH(crc,16,8);
|
||||||
|
} /* end for */
|
||||||
|
} /* end Gencrctab() */
|
||||||
|
|
||||||
|
int RS41::setup(float frequency)
|
||||||
|
{
|
||||||
|
#if RS41_DEBUG
|
||||||
|
Serial.println("Setup sx1278 for RS41 sonde");
|
||||||
|
#endif
|
||||||
|
if(!initialized) {
|
||||||
|
Gencrctab();
|
||||||
|
initrsc();
|
||||||
|
initialized = true;
|
||||||
|
}
|
||||||
|
|
||||||
|
if(sx1278.ON()!=0) {
|
||||||
|
RS41_DBG(Serial.println("Setting SX1278 power on FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
if(sx1278.setFSK()!=0) {
|
||||||
|
RS41_DBG(Serial.println("Setting FSK mode FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
if(sx1278.setBitrate(4800)!=0) {
|
||||||
|
RS41_DBG(Serial.println("Setting bitrate 4800bit/s FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
#if RS41_DEBUG
|
||||||
|
float br = sx1278.getBitrate();
|
||||||
|
Serial.print("Exact bitrate is ");
|
||||||
|
Serial.println(br);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
if(sx1278.setAFCBandwidth(sonde.config.rs41.agcbw)!=0) {
|
||||||
|
RS41_DBG(Serial.printf("Setting AFC bandwidth %d Hz FAILED", sonde.config.rs41.agcbw));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
if(sx1278.setRxBandwidth(sonde.config.rs41.rxbw)!=0) {
|
||||||
|
RS41_DBG(Serial.printf("Setting RX bandwidth to %d Hz FAILED", sonde.config.rs41.rxbw));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
// Enable auto-AFC, auto-AGC, RX Trigger by preamble
|
||||||
|
if(sx1278.setRxConf(0x1E)!=0) {
|
||||||
|
RS41_DBG(Serial.println("Setting RX Config FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
// Set autostart_RX to 01, preamble 0, SYNC detect==on, syncsize=3 (==4 byte
|
||||||
|
//char header[] = "0110.0101 0110.0110 1010.0101 1010.1010";
|
||||||
|
|
||||||
|
//const char *SYNC="\x10\xB6\xCA\x11\x22\x96\x12\xF8";
|
||||||
|
const char *SYNC="\x08\x6D\x53\x88\x44\x69\x48\x1F";
|
||||||
|
if(sx1278.setSyncConf(0x57, 8, (const uint8_t *)SYNC)!=0) {
|
||||||
|
RS41_DBG(Serial.println("Setting SYNC Config FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
if(sx1278.setPreambleDetect(0xA8)!=0) {
|
||||||
|
RS41_DBG(Serial.println("Setting PreambleDetect FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Packet config 1: fixed len, no mancecer, no crc, no address filter
|
||||||
|
// Packet config 2: packet mode, no home ctrl, no beackn, msb(packetlen)=0)
|
||||||
|
if(sx1278.setPacketConfig(0x08, 0x40)!=0) {
|
||||||
|
RS41_DBG(Serial.println("Setting Packet config FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
Serial.print("RS41: setting RX frequency to ");
|
||||||
|
Serial.println(frequency);
|
||||||
|
int retval = sx1278.setFrequency(frequency);
|
||||||
|
dpos = 0;
|
||||||
|
|
||||||
|
#if RS41_DEBUG
|
||||||
|
RS41_DBG(Serial.println("Setting SX1278 config for RS41 finished\n"); Serial.println());
|
||||||
|
#endif
|
||||||
|
sx1278.clearIRQFlags();
|
||||||
|
|
||||||
|
// the following is already done in receivePacketTimeout()
|
||||||
|
// sx1278.setPayloadLength(RS41MAXLEN-8); // Expect 320-8 bytes or 518-8 bytes (8 byte header)
|
||||||
|
// sx1278.writeRegister(REG_OP_MODE, FSK_RX_MODE);
|
||||||
|
return retval;
|
||||||
|
}
|
||||||
|
|
||||||
|
uint32_t RS41::bits2val(const uint8_t *bits, int len) {
|
||||||
|
uint32_t val = 0;
|
||||||
|
for (int j = 0; j < len; j++) {
|
||||||
|
val |= (bits[j] << (len-1-j));
|
||||||
|
}
|
||||||
|
return val;
|
||||||
|
}
|
||||||
|
|
||||||
|
RS41::RS41() {
|
||||||
|
}
|
||||||
|
|
||||||
|
/* RS41 reed solomon decoder, from dxlAPRS
|
||||||
|
*/
|
||||||
|
static int32_t reedsolomon41(byte buf[], uint32_t buf_len, uint32_t len2)
|
||||||
|
{
|
||||||
|
uint32_t i;
|
||||||
|
int32_t res1;
|
||||||
|
/*tb1, */
|
||||||
|
int32_t res;
|
||||||
|
char b1[256];
|
||||||
|
char b[256];
|
||||||
|
uint32_t eraspos[24];
|
||||||
|
uint32_t tmp;
|
||||||
|
for (i = 0UL; i<=255UL; i++) {
|
||||||
|
b[i] = 0;
|
||||||
|
b1[i] = 0;
|
||||||
|
} /* end for */
|
||||||
|
tmp = len2;
|
||||||
|
i = 0UL;
|
||||||
|
if (i<=tmp) for (;; i++) {
|
||||||
|
b[230UL-i] = buf[i*2UL+56UL];
|
||||||
|
b1[230UL-i] = buf[i*2UL+57UL];
|
||||||
|
if (i==tmp) break;
|
||||||
|
} /* end for */
|
||||||
|
for (i = 0UL; i<=23UL; i++) {
|
||||||
|
b[254UL-i] = buf[i+8UL];
|
||||||
|
b1[254UL-i] = buf[i+32UL];
|
||||||
|
} /* end for */
|
||||||
|
res = decodersc(b, eraspos, 0);
|
||||||
|
res1 = decodersc(b1, eraspos, 0);
|
||||||
|
if (res>0L && res<=12L) {
|
||||||
|
tmp = len2;
|
||||||
|
i = 0UL;
|
||||||
|
if (i<=tmp) for (;; i++) {
|
||||||
|
buf[i*2UL+56UL] = b[230UL-i];
|
||||||
|
if (i==tmp) break;
|
||||||
|
} /* end for */
|
||||||
|
for (i = 0UL; i<=23UL; i++) {
|
||||||
|
buf[i+8UL] = b[254UL-i];
|
||||||
|
} /* end for */
|
||||||
|
}
|
||||||
|
if (res1>0L && res1<=12L) {
|
||||||
|
tmp = len2;
|
||||||
|
i = 0UL;
|
||||||
|
if (i<=tmp) for (;; i++) {
|
||||||
|
buf[i*2UL+57UL] = b1[230UL-i];
|
||||||
|
if (i==tmp) break;
|
||||||
|
} /* end for */
|
||||||
|
for (i = 0UL; i<=23UL; i++) {
|
||||||
|
buf[i+32UL] = b1[254UL-i];
|
||||||
|
} /* end for */
|
||||||
|
}
|
||||||
|
if (res<0L || res1<0L) return -1L;
|
||||||
|
else return res+res1;
|
||||||
|
return 0;
|
||||||
|
} /* end reedsolomon41() */
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
static char crcrs(const byte frame[], uint32_t frame_len,
|
||||||
|
int32_t from, int32_t to)
|
||||||
|
{
|
||||||
|
uint16_t crc;
|
||||||
|
int32_t i;
|
||||||
|
int32_t tmp;
|
||||||
|
crc = 0xFFFFU;
|
||||||
|
tmp = to-3L;
|
||||||
|
i = from;
|
||||||
|
if (i<=tmp) for (;; i++) {
|
||||||
|
crc = X2C_LSH(crc,16,-8)^CRCTAB[(uint32_t)((crc^(uint16_t)(uint8_t)frame[i])&0xFFU)];
|
||||||
|
if (i==tmp) break;
|
||||||
|
} /* end for */
|
||||||
|
return frame[to-1L]==(char)crc && frame[to-2L]==(char)X2C_LSH(crc,
|
||||||
|
16,-8);
|
||||||
|
} /* end crcrs() */
|
||||||
|
|
||||||
|
static int32_t getint32(const byte frame[], uint32_t frame_len,
|
||||||
|
uint32_t p)
|
||||||
|
{
|
||||||
|
uint32_t n;
|
||||||
|
uint32_t i;
|
||||||
|
n = 0UL;
|
||||||
|
for (i = 3UL;; i--) {
|
||||||
|
n = n*256UL+(uint32_t)(uint8_t)frame[p+i];
|
||||||
|
if (i==0UL) break;
|
||||||
|
} /* end for */
|
||||||
|
return (int32_t)n;
|
||||||
|
} /* end getint32() */
|
||||||
|
|
||||||
|
|
||||||
|
static uint32_t getcard16(const byte frame[], uint32_t frame_len,
|
||||||
|
uint32_t p)
|
||||||
|
{
|
||||||
|
return (uint32_t)(uint8_t)frame[p]+256UL*(uint32_t)(uint8_t)
|
||||||
|
frame[p+1UL];
|
||||||
|
} /* end getcard16() */
|
||||||
|
|
||||||
|
|
||||||
|
static int32_t getint16(const byte frame[], uint32_t frame_len,
|
||||||
|
uint32_t p)
|
||||||
|
{
|
||||||
|
uint32_t n;
|
||||||
|
n = (uint32_t)(uint8_t)frame[p]+256UL*(uint32_t)(uint8_t)
|
||||||
|
frame[p+1UL];
|
||||||
|
if (n>=32768UL) return (int32_t)(n-65536UL);
|
||||||
|
return (int32_t)n;
|
||||||
|
} /* end getint16() */
|
||||||
|
|
||||||
|
static void wgs84r(double x, double y, double z,
|
||||||
|
double * lat, double * long0,
|
||||||
|
double * heig)
|
||||||
|
{
|
||||||
|
double sl;
|
||||||
|
double ct;
|
||||||
|
double st;
|
||||||
|
double t;
|
||||||
|
double rh;
|
||||||
|
double xh;
|
||||||
|
double h;
|
||||||
|
h = x*x+y*y;
|
||||||
|
if (h>0.0) {
|
||||||
|
rh = (double)sqrt((float)h);
|
||||||
|
xh = x+rh;
|
||||||
|
*long0 = atang2(xh, y)*2.0;
|
||||||
|
if (*long0>3.1415926535898) *long0 = *long0-6.2831853071796;
|
||||||
|
t = (double)atan((float)(X2C_DIVL(z*1.003364089821,
|
||||||
|
rh)));
|
||||||
|
st = (double)sin((float)t);
|
||||||
|
ct = (double)cos((float)t);
|
||||||
|
*lat = (double)atan((float)
|
||||||
|
(X2C_DIVL(z+4.2841311513312E+4*st*st*st,
|
||||||
|
rh-4.269767270718E+4*ct*ct*ct)));
|
||||||
|
sl = (double)sin((float)*lat);
|
||||||
|
*heig = X2C_DIVL(rh,(double)cos((float)*lat))-(double)(X2C_DIVR(6.378137E+6f,
|
||||||
|
sqrt((float)(1.0-6.6943799901413E-3*sl*sl))));
|
||||||
|
}
|
||||||
|
else {
|
||||||
|
*lat = 0.0;
|
||||||
|
*long0 = 0.0;
|
||||||
|
*heig = 0.0;
|
||||||
|
}
|
||||||
|
/* lat:=atan(z/(rh*(1.0 - E2))); */
|
||||||
|
/* heig:=sqrt(h + z*z) - EARTHA; */
|
||||||
|
} /* end wgs84r() */
|
||||||
|
|
||||||
|
// returns: 0=ok, -1=error
|
||||||
|
static void posrs41(const byte b[], uint32_t b_len, uint32_t p)
|
||||||
|
{
|
||||||
|
double dir;
|
||||||
|
double vu;
|
||||||
|
double ve;
|
||||||
|
double vn;
|
||||||
|
double vz;
|
||||||
|
double vy;
|
||||||
|
double vx;
|
||||||
|
double heig;
|
||||||
|
double long0;
|
||||||
|
double lat;
|
||||||
|
double z;
|
||||||
|
double y;
|
||||||
|
double x;
|
||||||
|
x = (double)getint32(b, b_len, p)*0.01;
|
||||||
|
y = (double)getint32(b, b_len, p+4UL)*0.01;
|
||||||
|
z = (double)getint32(b, b_len, p+8UL)*0.01;
|
||||||
|
wgs84r(x, y, z, &lat, &long0, &heig);
|
||||||
|
Serial.print(" ");
|
||||||
|
sonde.si()->lat = (float)(X2C_DIVL(lat,1.7453292519943E-2));
|
||||||
|
Serial.print(sonde.si()->lat);
|
||||||
|
Serial.print(" ");
|
||||||
|
sonde.si()->lon = (float)(X2C_DIVL(long0,1.7453292519943E-2));
|
||||||
|
Serial.print(sonde.si()->lon);
|
||||||
|
if (heig<1.E+5 && heig>(-1.E+5)) {
|
||||||
|
Serial.print(" ");
|
||||||
|
Serial.print((uint32_t)heig);
|
||||||
|
Serial.print("m");
|
||||||
|
}
|
||||||
|
/*speed */
|
||||||
|
vx = (double)getint16(b, b_len, p+12UL)*0.01;
|
||||||
|
vy = (double)getint16(b, b_len, p+14UL)*0.01;
|
||||||
|
vz = (double)getint16(b, b_len, p+16UL)*0.01;
|
||||||
|
vn = (-(vx*(double)sin((float)lat)*(double)
|
||||||
|
cos((float)long0))-vy*(double)
|
||||||
|
sin((float)lat)*(double)sin((float)
|
||||||
|
long0))+vz*(double)cos((float)lat);
|
||||||
|
ve = -(vx*(double)sin((float)long0))+vy*(double)
|
||||||
|
cos((float)long0);
|
||||||
|
vu = vx*(double)cos((float)lat)*(double)
|
||||||
|
cos((float)long0)+vy*(double)
|
||||||
|
cos((float)lat)*(double)sin((float)
|
||||||
|
long0)+vz*(double)sin((float)lat);
|
||||||
|
dir = X2C_DIVL(atang2(vn, ve),1.7453292519943E-2);
|
||||||
|
if (dir<0.0) dir = 360.0+dir;
|
||||||
|
sonde.si()->dir = dir;
|
||||||
|
Serial.print(" ");
|
||||||
|
sonde.si()->hs = sqrt((float)(vn*vn+ve*ve))*3.6f;
|
||||||
|
Serial.print(sonde.si()->hs);
|
||||||
|
Serial.print("km/h ");
|
||||||
|
Serial.print(dir);
|
||||||
|
Serial.print("deg ");
|
||||||
|
Serial.print((float)vu);
|
||||||
|
sonde.si()->vs = vu;
|
||||||
|
Serial.print("m/s ");
|
||||||
|
uint8_t sats = getcard16(b, b_len, p+18UL)&255UL;
|
||||||
|
Serial.print(sats);
|
||||||
|
Serial.print("Sats");
|
||||||
|
sonde.si()->sats = sats;
|
||||||
|
sonde.si()->alt = heig;
|
||||||
|
if( 0==(int)(lat*10000) && 0==(int)(long0*10000) ) {
|
||||||
|
if(sonde.si()->validPos) {
|
||||||
|
// we have an old position, so keep previous position and mark it as old
|
||||||
|
sonde.si()->validPos |= 0x80;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
else
|
||||||
|
sonde.si()->validPos = 0x7f;
|
||||||
|
} /* end posrs41() */
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// returns: 0: ok, -1: rs or crc error
|
||||||
|
int RS41::decode41(byte *data, int maxlen)
|
||||||
|
{
|
||||||
|
char buf[128];
|
||||||
|
int crcok = 0;
|
||||||
|
|
||||||
|
int32_t corr = reedsolomon41(data, 560, 131); // try short frame first
|
||||||
|
if(corr<0) {
|
||||||
|
corr = reedsolomon41(data, 560, 230); // try long frame
|
||||||
|
}
|
||||||
|
#if 0
|
||||||
|
Serial.print("RS result:");
|
||||||
|
Serial.print(corr);
|
||||||
|
Serial.println();
|
||||||
|
#endif
|
||||||
|
int p = 57; // 8 byte header, 48 byte RS
|
||||||
|
while(p<maxlen) { /* why 555? */
|
||||||
|
uint8_t typ = data[p++];
|
||||||
|
uint32_t len = data[p++]+2UL;
|
||||||
|
if(p+len>maxlen) break;
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
// DEBUG OUTPUT
|
||||||
|
Serial.print("@");
|
||||||
|
Serial.print(p-2);
|
||||||
|
Serial.print(": ID:");
|
||||||
|
Serial.print(typ, HEX);
|
||||||
|
Serial.print(", len=");
|
||||||
|
Serial.print(len);
|
||||||
|
Serial.print(": ");
|
||||||
|
for(int i=0; i<len-1; i++) {
|
||||||
|
char buf[3];
|
||||||
|
snprintf(buf, 4, "%02X|", data[p+i]);
|
||||||
|
Serial.print(buf);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
// check CRC
|
||||||
|
if(!crcrs(data, 560, p, p+len)) {
|
||||||
|
Serial.println("###CRC ERROR###");
|
||||||
|
} else {
|
||||||
|
crcok = 1;
|
||||||
|
switch(typ) {
|
||||||
|
case 'y': // name
|
||||||
|
{
|
||||||
|
Serial.print("#");
|
||||||
|
uint16_t fnr = data[p]+(data[p+1]<<8);
|
||||||
|
Serial.print(fnr);
|
||||||
|
sonde.si()->frame = fnr;
|
||||||
|
Serial.print("; RS41 ID ");
|
||||||
|
snprintf(buf, 10, "%.8s ", data+p+2);
|
||||||
|
Serial.print(buf);
|
||||||
|
sonde.si()->type=STYPE_RS41;
|
||||||
|
strncpy(sonde.si()->id, (const char *)(data+p+2), 8);
|
||||||
|
sonde.si()->id[8]=0;
|
||||||
|
strncpy(sonde.si()->ser, (const char *)(data+p+2), 8);
|
||||||
|
sonde.si()->ser[8]=0;
|
||||||
|
sonde.si()->validID=true;
|
||||||
|
int calnr = data[p+23];
|
||||||
|
// not sure about this
|
||||||
|
if(calnr==0x31) {
|
||||||
|
uint16_t bt = data[p+30] + 256*data[p+31];
|
||||||
|
sonde.si()->burstKT = bt;
|
||||||
|
}
|
||||||
|
// this should be right...
|
||||||
|
if(calnr==0x02) {
|
||||||
|
uint16_t kt = data[p+31] + 256*data[p+32];
|
||||||
|
sonde.si()->launchKT = kt;
|
||||||
|
}
|
||||||
|
// and this seems fine as well...
|
||||||
|
if(calnr==0x32) {
|
||||||
|
uint16_t cntdown = data[p+24] + (data[p+25]<<8);
|
||||||
|
uint16_t min = cntdown - (cntdown/3600)*3600;
|
||||||
|
Serial.printf("Countdown value: %d\n [%2d:%02d:%02d]", cntdown, cntdown/3600, min/60, min-(min/60)*60);
|
||||||
|
sonde.si()->countKT = cntdown;
|
||||||
|
sonde.si()->crefKT = fnr;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
// TODO: some more data
|
||||||
|
break;
|
||||||
|
case '|': // date
|
||||||
|
{
|
||||||
|
uint32_t gpstime = getint32(data, 560, p+2);
|
||||||
|
uint16_t gpsweek = getint16(data, 560, p);
|
||||||
|
// UTC is GPSTIME - 18s (24*60*60-18 = 86382)
|
||||||
|
// one week = 7*24*60*60 = 604800 seconds
|
||||||
|
// unix epoch starts jan 1st 1970 0:00
|
||||||
|
// gps time starts jan 6, 1980 0:00. thats 315964800 epoch seconds.
|
||||||
|
// subtracting 86400 yields 315878400UL
|
||||||
|
sonde.si()->time = (gpstime/1000) + 86382 + gpsweek*604800 + 315878400UL;
|
||||||
|
sonde.si()->validTime = true;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case '{': // pos
|
||||||
|
posrs41(data+p, len, 0);
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
break;
|
||||||
|
}}
|
||||||
|
p += len;
|
||||||
|
Serial.println();
|
||||||
|
}
|
||||||
|
return crcok ? 0 : -1;
|
||||||
|
}
|
||||||
|
void RS41::printRaw(uint8_t *data, int len)
|
||||||
|
{
|
||||||
|
char buf[3];
|
||||||
|
int i;
|
||||||
|
for(i=0; i<len; i++) {
|
||||||
|
snprintf(buf, 3, "%02X", data[i]);
|
||||||
|
Serial.print(buf);
|
||||||
|
}
|
||||||
|
Serial.println();
|
||||||
|
}
|
||||||
|
|
||||||
|
void RS41::bitsToBytes(uint8_t *bits, uint8_t *bytes, int len)
|
||||||
|
{
|
||||||
|
int i;
|
||||||
|
for(i=0; i<len*4; i++) {
|
||||||
|
bytes[i/8] = (bytes[i/8]<<1) | (bits[i]?1:0);
|
||||||
|
}
|
||||||
|
bytes[(i-1)/8] &= 0x0F;
|
||||||
|
}
|
||||||
|
|
||||||
|
static unsigned char lookup[16] = {
|
||||||
|
0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe,
|
||||||
|
0x1, 0x9, 0x5, 0xd, 0x3, 0xb, 0x7, 0xf, };
|
||||||
|
|
||||||
|
static uint8_t reverse(uint8_t n) {
|
||||||
|
return (lookup[n&0x0f] << 4) | lookup[n>>4];
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static uint8_t scramble[64] = {150U,131U,62U,81U,177U,73U,8U,152U,50U,5U,89U,
|
||||||
|
14U,249U,68U,198U,38U,33U,96U,194U,234U,121U,93U,109U,161U,
|
||||||
|
84U,105U,71U,12U,220U,232U,92U,241U,247U,118U,130U,127U,7U,
|
||||||
|
153U,162U,44U,147U,124U,48U,99U,245U,16U,46U,97U,208U,188U,
|
||||||
|
180U,182U,6U,170U,244U,35U,120U,110U,59U,174U,191U,123U,76U,
|
||||||
|
193U};
|
||||||
|
|
||||||
|
|
||||||
|
int RS41::receive() {
|
||||||
|
sx1278.setPayloadLength(RS41MAXLEN-8);
|
||||||
|
int e = sx1278.receivePacketTimeout(1000, data+8);
|
||||||
|
if(e) { Serial.println("TIMEOUT"); return RX_TIMEOUT; }
|
||||||
|
|
||||||
|
for(int i=0; i<RS41MAXLEN; i++) { data[i] = reverse(data[i]); }
|
||||||
|
for(int i=0; i<RS41MAXLEN; i++) { data[i] = data[i] ^ scramble[i&0x3F]; }
|
||||||
|
return decode41(data, RS41MAXLEN);
|
||||||
|
}
|
||||||
|
|
||||||
|
int RS41::waitRXcomplete() {
|
||||||
|
// Currently not used. can be used for additinoal post-processing
|
||||||
|
// (required for RS92 to avoid FIFO overrun in rx task)
|
||||||
|
#if 0
|
||||||
|
int res;
|
||||||
|
uint32_t t0 = millis();
|
||||||
|
while(rxtask.receiveResult<0 && millis()-t0 < 3000) { delay(50); }
|
||||||
|
|
||||||
|
if(rxtask.receiveResult<0 || rxtask.receiveResult==RX_TIMEOUT) {
|
||||||
|
res = RX_TIMEOUT;
|
||||||
|
} else if (rxtask.receiveResult==0) {
|
||||||
|
res = RX_OK;
|
||||||
|
} else {
|
||||||
|
res = RX_ERROR;
|
||||||
|
}
|
||||||
|
rxtask.receiveResult = -1;
|
||||||
|
Serial.printf("waitRXcomplete returning %d\n", res);
|
||||||
|
return res;
|
||||||
|
#endif
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
RS41 rs41 = RS41();
|
||||||
67
libraries/SondeLib/RS41.h
Executable file
67
libraries/SondeLib/RS41.h
Executable file
|
|
@ -0,0 +1,67 @@
|
||||||
|
/*
|
||||||
|
* RS41.h
|
||||||
|
* Functions for decoding RS41 sondes with SX127x chips
|
||||||
|
* Copyright (C) 2019 Hansi Reiser, dl9rdz
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef RS41_h
|
||||||
|
#define RS41_h
|
||||||
|
|
||||||
|
#include <stdlib.h>
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <Arduino.h>
|
||||||
|
#ifndef inttypes_h
|
||||||
|
#include <inttypes.h>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Main class */
|
||||||
|
class RS41
|
||||||
|
{
|
||||||
|
private:
|
||||||
|
uint32_t bits2val(const uint8_t *bits, int len);
|
||||||
|
void printRaw(uint8_t *data, int len);
|
||||||
|
void bitsToBytes(uint8_t *bits, uint8_t *bytes, int len);
|
||||||
|
int decode41(byte *data, int maxlen);
|
||||||
|
|
||||||
|
#define B 8
|
||||||
|
#define S 4
|
||||||
|
uint8_t hamming_conf[ 7*B]; // 7*8=56
|
||||||
|
uint8_t hamming_dat1[13*B]; // 13*8=104
|
||||||
|
uint8_t hamming_dat2[13*B];
|
||||||
|
|
||||||
|
uint8_t block_conf[ 7*S]; // 7*4=28
|
||||||
|
uint8_t block_dat1[13*S]; // 13*4=52
|
||||||
|
uint8_t block_dat2[13*S];
|
||||||
|
|
||||||
|
uint8_t H[4][8] = // extended Hamming(8,4) particy check matrix
|
||||||
|
{{ 0, 1, 1, 1, 1, 0, 0, 0},
|
||||||
|
{ 1, 0, 1, 1, 0, 1, 0, 0},
|
||||||
|
{ 1, 1, 0, 1, 0, 0, 1, 0},
|
||||||
|
{ 1, 1, 1, 0, 0, 0, 0, 1}};
|
||||||
|
uint8_t He[8] = { 0x7, 0xB, 0xD, 0xE, 0x8, 0x4, 0x2, 0x1}; // Spalten von H:
|
||||||
|
// 1-bit-error-Syndrome
|
||||||
|
boolean initialized = false;
|
||||||
|
|
||||||
|
public:
|
||||||
|
RS41();
|
||||||
|
// New interface:
|
||||||
|
// setup() is called when channel is activated (sets mode and frequency and activates receiver)
|
||||||
|
int setup(float frequency);
|
||||||
|
// processRXbyte is called by background task for each received byte
|
||||||
|
// should be fast enough to not cause sx127x fifo buffer overflow
|
||||||
|
// void processRXbyte(uint8_t data);
|
||||||
|
// is called approx. 1x per second, may do some post-processing of received data
|
||||||
|
// and update information in sonde data structure
|
||||||
|
// returns infomration about sucess/error (for timers and for quality bar in display)
|
||||||
|
int receive();
|
||||||
|
int waitRXcomplete();
|
||||||
|
//int receiveFrame();
|
||||||
|
|
||||||
|
int use_ecc = 1;
|
||||||
|
};
|
||||||
|
|
||||||
|
extern RS41 rs41;
|
||||||
|
|
||||||
|
#endif
|
||||||
727
libraries/SondeLib/RS92.cpp
Executable file
727
libraries/SondeLib/RS92.cpp
Executable file
|
|
@ -0,0 +1,727 @@
|
||||||
|
|
||||||
|
/* RS92 decoder functions */
|
||||||
|
#include "RS92.h"
|
||||||
|
#include "SX1278FSK.h"
|
||||||
|
#include "rsc.h"
|
||||||
|
#include "Sonde.h"
|
||||||
|
#include <SPIFFS.h>
|
||||||
|
|
||||||
|
// well...
|
||||||
|
#include "rs92gps.h"
|
||||||
|
|
||||||
|
#define RS92_DEBUG 1
|
||||||
|
|
||||||
|
#if RS92_DEBUG
|
||||||
|
#define RS92_DBG(x) x
|
||||||
|
#else
|
||||||
|
#define RS92_DBG(x)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//static uint16_t CRCTAB[256];
|
||||||
|
uint16_t *CRCTAB = NULL;
|
||||||
|
|
||||||
|
#define X2C_DIVR(a, b) ((b) != 0.0f ? (a)/(b) : (a))
|
||||||
|
#define X2C_DIVL(a, b) ((a)/(b))
|
||||||
|
static uint32_t X2C_LSH(uint32_t a, int32_t length, int32_t n)
|
||||||
|
{
|
||||||
|
uint32_t m;
|
||||||
|
|
||||||
|
m = 0;
|
||||||
|
m = (length == 32) ? 0xFFFFFFFFl : (1 << length) - 1;
|
||||||
|
if (n > 0) {
|
||||||
|
if (n >= (int32_t)length)
|
||||||
|
return 0;
|
||||||
|
return (a << n) & m;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (n <= (int32_t)-length)
|
||||||
|
return 0;
|
||||||
|
return (a >> -n) & m;
|
||||||
|
}
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
static double atang2(double x, double y)
|
||||||
|
{
|
||||||
|
double w;
|
||||||
|
if (fabs(x)>fabs(y)) {
|
||||||
|
w = (double)atan((float)(X2C_DIVL(y,x)));
|
||||||
|
if (x<0.0) {
|
||||||
|
if (y>0.0) w = 3.1415926535898+w;
|
||||||
|
else w = w-3.1415926535898;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
else if (y!=0.0) {
|
||||||
|
w = (double)(1.5707963267949f-atan((float)(X2C_DIVL(x,
|
||||||
|
y))));
|
||||||
|
if (y<0.0) w = w-3.1415926535898;
|
||||||
|
}
|
||||||
|
else w = 0.0;
|
||||||
|
return w;
|
||||||
|
} /* end atang2() */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
static void Gencrctab(void)
|
||||||
|
{
|
||||||
|
uint16_t j;
|
||||||
|
uint16_t i;
|
||||||
|
uint16_t crc;
|
||||||
|
if(!CRCTAB) { CRCTAB=(uint16_t *)malloc(256*sizeof(uint16_t)); }
|
||||||
|
for (i = 0U; i<=255U; i++) {
|
||||||
|
crc = (uint16_t)(i*256U);
|
||||||
|
for (j = 0U; j<=7U; j++) {
|
||||||
|
if ((0x8000U & crc)) crc = X2C_LSH(crc,16,1)^0x1021U;
|
||||||
|
else crc = X2C_LSH(crc,16,1);
|
||||||
|
} /* end for */
|
||||||
|
CRCTAB[i] = X2C_LSH(crc,16,-8)|X2C_LSH(crc,16,8);
|
||||||
|
} /* end for */
|
||||||
|
} /* end Gencrctab() */
|
||||||
|
|
||||||
|
|
||||||
|
static byte data1[512]={0x2A, 0x2A, 0x2A, 0x2A, 0x2A, 0x10};
|
||||||
|
static byte data2[512]={0x2A, 0x2A, 0x2A, 0x2A, 0x2A, 0x10};
|
||||||
|
static byte *dataptr=data1;
|
||||||
|
|
||||||
|
static uint8_t rxbitc;
|
||||||
|
static int32_t asynst[10]={0};
|
||||||
|
static uint16_t rxbyte;
|
||||||
|
int rxp=0;
|
||||||
|
|
||||||
|
static int haveNewFrame = 0;
|
||||||
|
static int lastFrame = 0;
|
||||||
|
static int headerDetected = 0;
|
||||||
|
|
||||||
|
int RS92::setup(float frequency)
|
||||||
|
{
|
||||||
|
#if RS92_DEBUG
|
||||||
|
Serial.println("Setup sx1278 for RS92 sonde");
|
||||||
|
#endif
|
||||||
|
if(!initialized) {
|
||||||
|
Gencrctab();
|
||||||
|
initrsc();
|
||||||
|
// not here for now.... get_eph("/brdc.19n");
|
||||||
|
initialized = true;
|
||||||
|
}
|
||||||
|
|
||||||
|
if(sx1278.ON()!=0) {
|
||||||
|
RS92_DBG(Serial.println("Setting SX1278 power on FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
if(sx1278.setFSK()!=0) {
|
||||||
|
RS92_DBG(Serial.println("Setting FSJ mode FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
if(sx1278.setBitrate(4800)!=0) {
|
||||||
|
RS92_DBG(Serial.println("Setting bitrate 4800bit/s FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
#if RS92_DEBUG
|
||||||
|
float br = sx1278.getBitrate();
|
||||||
|
Serial.print("Exact bitrate is ");
|
||||||
|
Serial.println(br);
|
||||||
|
#endif
|
||||||
|
if(sx1278.setAFCBandwidth(sonde.config.rs92.rxbw)!=0) {
|
||||||
|
RS92_DBG(Serial.printf("Setting AFC bandwidth %d Hz FAILED", sonde.config.rs92.rxbw));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
if(sx1278.setRxBandwidth(sonde.config.rs92.rxbw)!=0) {
|
||||||
|
RS92_DBG(Serial.printf("Setting RX bandwidth to %d Hz FAILED", sonde.config.rs92.rxbw));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Enable auto-AFC, auto-AGC, RX Trigger by preamble
|
||||||
|
if(sx1278.setRxConf(0x1E)!=0) {
|
||||||
|
RS92_DBG(Serial.println("Setting RX Config FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
// Set autostart_RX to 01, preamble 0, SYNC detect==on, syncsize=3 (==4 byte
|
||||||
|
//char header[] = "0110.0101 0110.0110 1010.0101 1010.1010";
|
||||||
|
|
||||||
|
//const char *SYNC="\x10\xB6\xCA\x11\x22\x96\x12\xF8";
|
||||||
|
//const char *SYNC="\x08\x6D\x53\x88\x44\x69\x48\x1F";
|
||||||
|
// was 0x57
|
||||||
|
//const char *SYNC="\x99\x9A";
|
||||||
|
#if 1
|
||||||
|
// version 1, working with continuous RX
|
||||||
|
const char *SYNC="\x66\x65";
|
||||||
|
if(sx1278.setSyncConf(0x70, 2, (const uint8_t *)SYNC)!=0) {
|
||||||
|
RS92_DBG(Serial.println("Setting SYNC Config FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
if(sx1278.setPreambleDetect(0xA8)!=0) {
|
||||||
|
RS92_DBG(Serial.println("Setting PreambleDetect FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
#if 0
|
||||||
|
// version 2, with per-packet rx start, untested
|
||||||
|
// header is 2a 10 65, i.e. with lsb first
|
||||||
|
// 0 0101 0100 1 0 0000 1000 1 0 1010 0110 1
|
||||||
|
// 10 10011001 10011010 01 10 10101010 01101010 01 10 01100110 10010110 01
|
||||||
|
// preamble 0x6A 0x66 0x6A
|
||||||
|
// i.e. preamble detector on (0x80), preamble detector size 1 (0x00), preample chip errors??? (0x0A)
|
||||||
|
// after 2a2a2a2a2a1065
|
||||||
|
if(sx1278.setPreambleDetect(0xA8)!=0) {
|
||||||
|
RS92_DBG(Serial.println("Setting PreambleDetect FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
// sync config: ato restart (01), preamble polarity AA (0), sync on (1), resevered (0), syncsize 2+1 (010) => 0x52
|
||||||
|
const char *SYNC="\x6A\x66\x69";
|
||||||
|
if(sx1278.setSyncConf(0x52, 3, (const uint8_t *)SYNC)!=0) {
|
||||||
|
RS92_DBG(Serial.println("Setting SYNC Config FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
// payload length is ((240 - 7)*10 +6)/8 = 292
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Packet config 1: fixed len, no mancecer, no crc, no address filter
|
||||||
|
// Packet config 2: packet mode, no home ctrl, no beackn, msb(packetlen)=0)
|
||||||
|
if(sx1278.setPacketConfig(0x08, 0x40)!=0) {
|
||||||
|
RS92_DBG(Serial.println("Setting Packet config FAILED"));
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
Serial.print("RS92: setting RX frequency to ");
|
||||||
|
Serial.println(frequency);
|
||||||
|
int res = sx1278.setFrequency(frequency);
|
||||||
|
sx1278.clearIRQFlags();
|
||||||
|
|
||||||
|
// enable RX
|
||||||
|
sx1278.setPayloadLength(0); // infinite for now...
|
||||||
|
//sx1278.setPayloadLength(292);
|
||||||
|
sx1278.writeRegister(REG_OP_MODE, FSK_RX_MODE);
|
||||||
|
|
||||||
|
#if RS92_DEBUG
|
||||||
|
RS92_DBG(Serial.println("Setting SX1278 config for RS92 finished\n"); Serial.println());
|
||||||
|
#endif
|
||||||
|
return res;
|
||||||
|
}
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
int RS92::setFrequency(float frequency) {
|
||||||
|
Serial.print("RS92: setting RX frequency to ");
|
||||||
|
Serial.println(frequency);
|
||||||
|
int res = sx1278.setFrequency(frequency);
|
||||||
|
// enable RX
|
||||||
|
sx1278.setPayloadLength(0); // infinite for now...
|
||||||
|
|
||||||
|
sx1278.writeRegister(REG_OP_MODE, FSK_RX_MODE);
|
||||||
|
return res;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
uint32_t RS92::bits2val(const uint8_t *bits, int len) {
|
||||||
|
uint32_t val = 0;
|
||||||
|
for (int j = 0; j < len; j++) {
|
||||||
|
val |= (bits[j] << (len-1-j));
|
||||||
|
}
|
||||||
|
return val;
|
||||||
|
}
|
||||||
|
|
||||||
|
RS92::RS92() {
|
||||||
|
}
|
||||||
|
|
||||||
|
/* RS92 reed solomon decoder, from dxlAPRS
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
static char crcrs(const byte frame[], uint32_t frame_len,
|
||||||
|
int32_t from, int32_t to)
|
||||||
|
{
|
||||||
|
uint16_t crc;
|
||||||
|
int32_t i;
|
||||||
|
int32_t tmp;
|
||||||
|
crc = 0xFFFFU;
|
||||||
|
tmp = to-3L;
|
||||||
|
i = from;
|
||||||
|
if (i<=tmp) for (;; i++) {
|
||||||
|
crc = X2C_LSH(crc,16,-8)^CRCTAB[(uint32_t)((crc^(uint16_t)(uint8_t)frame[i])&0xFFU)];
|
||||||
|
if (i==tmp) break;
|
||||||
|
} /* end for */
|
||||||
|
return frame[to-1L]==(char)crc && frame[to-2L]==(char)X2C_LSH(crc,
|
||||||
|
16,-8);
|
||||||
|
} /* end crcrs() */
|
||||||
|
|
||||||
|
static int32_t getint32(const byte frame[], uint32_t frame_len,
|
||||||
|
uint32_t p)
|
||||||
|
{
|
||||||
|
uint32_t n;
|
||||||
|
uint32_t i;
|
||||||
|
n = 0UL;
|
||||||
|
for (i = 3UL;; i--) {
|
||||||
|
n = n*256UL+(uint32_t)(uint8_t)frame[p+i];
|
||||||
|
if (i==0UL) break;
|
||||||
|
} /* end for */
|
||||||
|
return (int32_t)n;
|
||||||
|
} /* end getint32() */
|
||||||
|
|
||||||
|
|
||||||
|
static uint32_t getcard16(const byte frame[], uint32_t frame_len,
|
||||||
|
uint32_t p)
|
||||||
|
{
|
||||||
|
return (uint32_t)(uint8_t)frame[p]+256UL*(uint32_t)(uint8_t)
|
||||||
|
frame[p+1UL];
|
||||||
|
} /* end getcard16() */
|
||||||
|
|
||||||
|
|
||||||
|
static int32_t getint16(const byte frame[], uint32_t frame_len,
|
||||||
|
uint32_t p)
|
||||||
|
{
|
||||||
|
uint32_t n;
|
||||||
|
n = (uint32_t)(uint8_t)frame[p]+256UL*(uint32_t)(uint8_t)
|
||||||
|
frame[p+1UL];
|
||||||
|
if (n>=32768UL) return (int32_t)(n-65536UL);
|
||||||
|
return (int32_t)n;
|
||||||
|
} /* end getint16() */
|
||||||
|
|
||||||
|
static void wgs84r(double x, double y, double z,
|
||||||
|
double * lat, double * long0,
|
||||||
|
double * heig)
|
||||||
|
{
|
||||||
|
double sl;
|
||||||
|
double ct;
|
||||||
|
double st;
|
||||||
|
double t;
|
||||||
|
double rh;
|
||||||
|
double xh;
|
||||||
|
double h;
|
||||||
|
h = x*x+y*y;
|
||||||
|
if (h>0.0) {
|
||||||
|
rh = (double)sqrt((float)h);
|
||||||
|
xh = x+rh;
|
||||||
|
*long0 = atang2(xh, y)*2.0;
|
||||||
|
if (*long0>3.1415926535898) *long0 = *long0-6.2831853071796;
|
||||||
|
t = (double)atan((float)(X2C_DIVL(z*1.003364089821,
|
||||||
|
rh)));
|
||||||
|
st = (double)sin((float)t);
|
||||||
|
ct = (double)cos((float)t);
|
||||||
|
*lat = (double)atan((float)
|
||||||
|
(X2C_DIVL(z+4.2841311513312E+4*st*st*st,
|
||||||
|
rh-4.269767270718E+4*ct*ct*ct)));
|
||||||
|
sl = (double)sin((float)*lat);
|
||||||
|
*heig = X2C_DIVL(rh,(double)cos((float)*lat))-(double)(X2C_DIVR(6.378137E+6f,
|
||||||
|
sqrt((float)(1.0-6.6943799901413E-3*sl*sl))));
|
||||||
|
}
|
||||||
|
else {
|
||||||
|
*lat = 0.0;
|
||||||
|
*long0 = 0.0;
|
||||||
|
*heig = 0.0;
|
||||||
|
}
|
||||||
|
/* lat:=atan(z/(rh*(1.0 - E2))); */
|
||||||
|
/* heig:=sqrt(h + z*z) - EARTHA; */
|
||||||
|
} /* end wgs84r() */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
static int32_t reedsolomon92(uint8_t *buf, uint32_t buf_len)
|
||||||
|
{
|
||||||
|
uint32_t i;
|
||||||
|
int32_t res;
|
||||||
|
uint8_t b[256];
|
||||||
|
uint32_t eraspos[24];
|
||||||
|
for (i = 0UL; i<=255UL; i++) {
|
||||||
|
b[i] = 0;
|
||||||
|
} /* end for */
|
||||||
|
for (i = 0UL; i<=209UL; i++) {
|
||||||
|
b[230UL-i] = buf[i+6UL];
|
||||||
|
} /* end for */
|
||||||
|
for (i = 0UL; i<=23UL; i++) {
|
||||||
|
b[254UL-i] = buf[i+216UL];
|
||||||
|
} /* end for */
|
||||||
|
res = decodersc((char *)b, eraspos, 0L);
|
||||||
|
if (res>0L && res<=12L) {
|
||||||
|
for (i = 0UL; i<=209UL; i++) {
|
||||||
|
buf[i+6UL] = b[230UL-i];
|
||||||
|
} /* end for */
|
||||||
|
for (i = 0UL; i<=23UL; i++) {
|
||||||
|
buf[i+216UL] = b[254UL-i];
|
||||||
|
} /* end for */
|
||||||
|
}
|
||||||
|
return res;
|
||||||
|
} /* end reedsolomon92() */
|
||||||
|
|
||||||
|
void printRaw(uint8_t *data, int len)
|
||||||
|
{
|
||||||
|
char buf[3];
|
||||||
|
int i;
|
||||||
|
for(i=0; i<len; i++) {
|
||||||
|
snprintf(buf, 3, "%02X", data[i]);
|
||||||
|
Serial.print(buf);
|
||||||
|
}
|
||||||
|
Serial.println();
|
||||||
|
}
|
||||||
|
|
||||||
|
void RS92::decodeframe92(uint8_t *data)
|
||||||
|
{
|
||||||
|
//uint32_t gpstime;
|
||||||
|
//uint32_t flen;
|
||||||
|
//uint32_t j;
|
||||||
|
int32_t corr;
|
||||||
|
corr = reedsolomon92(data, 301ul);
|
||||||
|
//int calok;
|
||||||
|
//int mesok;
|
||||||
|
//uint32_t calibok;
|
||||||
|
lastFrame = (dataptr==data1)?1:2;
|
||||||
|
Serial.printf("rs corr is %d --- data:%p data1:%p data2:%p lastframe=%d\n", corr, data, data1, data2, lastFrame);
|
||||||
|
dataptr = (dataptr==data1)?data2:data1;
|
||||||
|
//print_frame(data, 240);
|
||||||
|
#if 0
|
||||||
|
/* from sondemod*/
|
||||||
|
int p=6;
|
||||||
|
while(1) {
|
||||||
|
uint8_t typ = data[p];
|
||||||
|
if(typ==0xff) break;
|
||||||
|
++p;
|
||||||
|
int len = ((uint32_t)data[p])*2 + 2;
|
||||||
|
Serial.printf("type %c: len=%d\n", typ, len);
|
||||||
|
//printRaw(data+p, len+2);
|
||||||
|
if(len>240) {
|
||||||
|
Serial.print("RS92 frame too long: ");
|
||||||
|
Serial.println(len);
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
++p;
|
||||||
|
j=0;
|
||||||
|
uint16_t crc = 0xFFFF;
|
||||||
|
while(j<len) {
|
||||||
|
if(j < len-2) {
|
||||||
|
for(int ic = 0; ic<=7; ic++) {
|
||||||
|
if (((0x8000&crc)!=0) != ( ((1<<(7-ic))&data[p])!=0 )) {
|
||||||
|
crc <<= 1;
|
||||||
|
crc ^= 0x1021;
|
||||||
|
} else {
|
||||||
|
crc <<= 1;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
++p;
|
||||||
|
++j;
|
||||||
|
if(p>240) {
|
||||||
|
Serial.println("eof");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if ( (((uint8_t)(crc&0xff)) != data[p-2]) || (((uint8_t)(crc>>8)) != data[p-1])) {
|
||||||
|
Serial.printf("************ crc error: expected %04x\n",crc);
|
||||||
|
continue;
|
||||||
|
}
|
||||||
|
switch(typ) {
|
||||||
|
case 'e':
|
||||||
|
Serial.println("cal ");
|
||||||
|
//docalib(sf, 256, objname, 9, &contextr9, &mhz, &frameno);
|
||||||
|
// ...
|
||||||
|
break;
|
||||||
|
case 'i':
|
||||||
|
if(calok && calibok==0xffffffff) {
|
||||||
|
//domes(sf, 256, &hp, &hyg, &temp)
|
||||||
|
mesok = 1;
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case 'g':
|
||||||
|
Serial.println("gps ");
|
||||||
|
if(1||calok) {
|
||||||
|
//dogps(data+p-len, 256, &contextr9, &contextr9.timems, &gpstime);
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case 'h':
|
||||||
|
Serial.println("data "); break;
|
||||||
|
if(data[p+2]!=3) Serial.println("aux ");
|
||||||
|
// ..
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
} /* end decodeframe92() */
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
void RS92::printRaw(uint8_t *data, int len)
|
||||||
|
{
|
||||||
|
char buf[3];
|
||||||
|
int i;
|
||||||
|
for(i=0; i<len; i++) {
|
||||||
|
snprintf(buf, 3, "%02X", data[i]);
|
||||||
|
Serial.print(buf);
|
||||||
|
}
|
||||||
|
Serial.println();
|
||||||
|
}
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
// I guess this is old copy&paste stuff from RS41??
|
||||||
|
int RS92::bitsToBytes(uint8_t *bits, uint8_t *bytes, int len)
|
||||||
|
{
|
||||||
|
int i;
|
||||||
|
for(i=0; i<len*4; i++) {
|
||||||
|
bytes[i/8] = (bytes[i/8]<<1) | (bits[i]?1:0);
|
||||||
|
}
|
||||||
|
bytes[(i-1)/8] &= 0x0F;
|
||||||
|
}
|
||||||
|
|
||||||
|
static unsigned char lookup[16] = {
|
||||||
|
0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe,
|
||||||
|
0x1, 0x9, 0x5, 0xd, 0x3, 0xb, 0x7, 0xf, };
|
||||||
|
|
||||||
|
static uint8_t reverse(uint8_t n) {
|
||||||
|
return (lookup[n&0x0f] << 4) | lookup[n>>4];
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static uint8_t scramble[64] = {150U,131U,62U,81U,177U,73U,8U,152U,50U,5U,89U,
|
||||||
|
14U,249U,68U,198U,38U,33U,96U,194U,234U,121U,93U,109U,161U,
|
||||||
|
84U,105U,71U,12U,220U,232U,92U,241U,247U,118U,130U,127U,7U,
|
||||||
|
153U,162U,44U,147U,124U,48U,99U,245U,16U,46U,97U,208U,188U,
|
||||||
|
180U,182U,6U,170U,244U,35U,120U,110U,59U,174U,191U,123U,76U,
|
||||||
|
193U};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
void RS92::stobyte92(uint8_t b)
|
||||||
|
{
|
||||||
|
dataptr[rxp] = b;
|
||||||
|
if(rxp>=5 || b=='*') rxp++; else rxp=0;
|
||||||
|
if(rxp==6) { // header detected
|
||||||
|
headerDetected = 1;
|
||||||
|
}
|
||||||
|
if(rxp>=240) { // frame complete... (240 byte)
|
||||||
|
rxp=0;
|
||||||
|
//printRaw(data, 240);
|
||||||
|
decodeframe92(dataptr);
|
||||||
|
haveNewFrame = 1;
|
||||||
|
}
|
||||||
|
} /* end stobyte92() */
|
||||||
|
|
||||||
|
|
||||||
|
uint32_t rxdata;
|
||||||
|
bool rxsearching=true;
|
||||||
|
|
||||||
|
// search for
|
||||||
|
// 101001100110011010011010011001100110100110101010100110101001
|
||||||
|
// 1010011001100110100110100110 0110.0110 1001.1010 1010.1001 1010.1001 => 0x669AA9A9
|
||||||
|
void RS92::process8N1data(uint8_t dt)
|
||||||
|
{
|
||||||
|
for(int i=0; i<8; i++) {
|
||||||
|
uint8_t d = (dt&0x80)?1:0;
|
||||||
|
rxdata = (rxdata<<1) | d;
|
||||||
|
if((rxbitc&1)==1) { rxbyte = (rxbyte>>1) + (d<<9); } // mancester decoded data
|
||||||
|
dt <<= 1;
|
||||||
|
//
|
||||||
|
if(rxsearching) {
|
||||||
|
if(rxdata == 0x669AA9A9) {
|
||||||
|
rxsearching = false;
|
||||||
|
rxbitc = 0;
|
||||||
|
rxp = 6;
|
||||||
|
int rssi=sx1278.getRSSI();
|
||||||
|
int fei=sx1278.getFEI();
|
||||||
|
int afc=sx1278.getAFC();
|
||||||
|
Serial.print("Test: RSSI="); Serial.print(rssi);
|
||||||
|
Serial.print(" FEI="); Serial.print(fei);
|
||||||
|
Serial.print(" AFC="); Serial.println(afc);
|
||||||
|
sonde.si()->rssi = rssi;
|
||||||
|
sonde.si()->afc = afc;
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
rxbitc = (rxbitc+1)%20;
|
||||||
|
if(rxbitc == 0) { // got startbit, 8 data bit, stop bit
|
||||||
|
//Serial.printf("%03x ",rxbyte);
|
||||||
|
dataptr[rxp++] = (rxbyte>>1)&0xff;
|
||||||
|
if(rxp==7 && dataptr[6] != 0x65) {
|
||||||
|
Serial.printf("wrong start: %02x\n",dataptr[6]);
|
||||||
|
rxsearching = true;
|
||||||
|
}
|
||||||
|
if(rxp>=240) {
|
||||||
|
rxsearching = true;
|
||||||
|
decodeframe92(dataptr);
|
||||||
|
haveNewFrame = 1;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void process8N1dataOrig(uint8_t data)
|
||||||
|
{
|
||||||
|
// data contains 8 bits (after mancester encoding; 4 real bit), big endian
|
||||||
|
for(int i=0; i<4; i++) {
|
||||||
|
uint8_t d = (data&0x80)?1:0;
|
||||||
|
data = data << 2;
|
||||||
|
rxbyte = (rxbyte>>1) + (d<<8);
|
||||||
|
int maxk = 0;
|
||||||
|
int max0 = 0;
|
||||||
|
for(int k = 0; k< 10; k++) {
|
||||||
|
int n = asynst[k] - asynst[(k+1)%10];
|
||||||
|
if(abs(n)>abs(max0)) {
|
||||||
|
max0 = n;
|
||||||
|
maxk = k;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
//Serial.printf("<%d,%d,%d>",max0,maxk,rxbitc);
|
||||||
|
if(rxbitc == maxk) {
|
||||||
|
if(max0<0) { rxbyte = rxbyte ^ 0xFF; }
|
||||||
|
/////TODO stobyte92( rxbyte&0xff );
|
||||||
|
}
|
||||||
|
//Serial.printf("%d:",asynst[rxbitc]);
|
||||||
|
if(d) {
|
||||||
|
asynst[rxbitc] += (32767-asynst[rxbitc])/16;
|
||||||
|
} else {
|
||||||
|
asynst[rxbitc] -= (32767+asynst[rxbitc])/16;
|
||||||
|
}
|
||||||
|
//Serial.printf("%d ",asynst[rxbitc]);
|
||||||
|
rxbitc = (rxbitc+1) % 10;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
int RS92::receive() {
|
||||||
|
unsigned long t0 = millis();
|
||||||
|
Serial.printf("RS92::receive() start at %ld\n",t0);
|
||||||
|
while( millis() - t0 < 1000 ) {
|
||||||
|
uint8_t value = sx1278.readRegister(REG_IRQ_FLAGS2);
|
||||||
|
if ( bitRead(value, 7) ) {
|
||||||
|
Serial.println("FIFO full");
|
||||||
|
}
|
||||||
|
if ( bitRead(value, 4) ) {
|
||||||
|
Serial.println("FIFO overflow");
|
||||||
|
}
|
||||||
|
if ( bitRead(value, 2) == 1 ) {
|
||||||
|
Serial.println("FIFO: ready()");
|
||||||
|
sx1278.clearIRQFlags();
|
||||||
|
}
|
||||||
|
if(bitRead(value, 6) == 0) { // while FIFO not empty
|
||||||
|
byte data = sx1278.readRegister(REG_FIFO);
|
||||||
|
//Serial.printf("%02x",data);
|
||||||
|
process8N1data(data);
|
||||||
|
value = sx1278.readRegister(REG_IRQ_FLAGS2);
|
||||||
|
} else {
|
||||||
|
if(headerDetected) {
|
||||||
|
t0 = millis(); // restart timer... don't time out if header detected...
|
||||||
|
headerDetected = 0;
|
||||||
|
}
|
||||||
|
if(haveNewFrame) {
|
||||||
|
Serial.printf("RS92::receive(): new frame complete after %ldms\n", millis()-t0);
|
||||||
|
haveNewFrame = 0;
|
||||||
|
return RX_OK;
|
||||||
|
}
|
||||||
|
delay(2);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
Serial.printf("RS92::receive() timed out\n");
|
||||||
|
return RX_TIMEOUT; // TODO RX_OK;
|
||||||
|
}
|
||||||
|
|
||||||
|
#define RS92MAXLEN (240)
|
||||||
|
int RS92::waitRXcomplete() {
|
||||||
|
// called after complete...
|
||||||
|
Serial.printf("decoding frame %d\n", lastFrame);
|
||||||
|
print_frame(lastFrame==1?data1:data2, 240);
|
||||||
|
|
||||||
|
SondeInfo *si = sonde.sondeList+rxtask.receiveSonde;
|
||||||
|
si->lat = gpx.lat;
|
||||||
|
si->lon = gpx.lon;
|
||||||
|
si->alt = gpx.alt;
|
||||||
|
si->vs = gpx.vU;
|
||||||
|
si->hs = gpx.vH;
|
||||||
|
si->dir = gpx.vD;
|
||||||
|
si->validPos = 0x3f;
|
||||||
|
memcpy(si->id, gpx.id, 9);
|
||||||
|
memcpy(si->ser, gpx.id, 9);
|
||||||
|
si->validID = true;
|
||||||
|
si->frame = gpx.frnr;
|
||||||
|
si->sats = gpx.k;
|
||||||
|
si->time = (gpx.gpssec/1000) + 86382 + gpx.week*604800 + 315878400UL;
|
||||||
|
si->validTime = true;
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
int res=0;
|
||||||
|
uint32_t t0 = millis();
|
||||||
|
while( rxtask.receiveResult == 0xFFFF && millis()-t0 < 2000) { delay(20); }
|
||||||
|
|
||||||
|
if( rxtask.receiveResult<0 || rxtask.receiveResult==RX_TIMEOUT) {
|
||||||
|
res = RX_TIMEOUT;
|
||||||
|
} else if ( rxtask.receiveResult==0) {
|
||||||
|
res = RX_OK;
|
||||||
|
} else {
|
||||||
|
res = RX_ERROR;
|
||||||
|
}
|
||||||
|
rxtask.receiveResult = 0xFFFF;
|
||||||
|
Serial.printf("RS92::waitRXcomplete returning %d (%s)\n", res, RXstr[res]);
|
||||||
|
return res;
|
||||||
|
#endif
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
int oldwaitRXcomplete() {
|
||||||
|
Serial.println("RS92: receive frame...\n");
|
||||||
|
sx1278receiveData = true;
|
||||||
|
delay(6000); // done in other task....
|
||||||
|
//sx1278receiveData = false;
|
||||||
|
#if 0
|
||||||
|
//sx1278.setPayloadLength(518-8); // Expect 320-8 bytes or 518-8 bytes (8 byte header)
|
||||||
|
//sx1278.setPayloadLength(0); // infinite for now...
|
||||||
|
|
||||||
|
////// test code for continuous reception
|
||||||
|
// sx1278.receive(); /// active FSK RX mode -- already done above...
|
||||||
|
uint8_t value = sx1278.readRegister(REG_IRQ_FLAGS2);
|
||||||
|
unsigned long previous = millis();
|
||||||
|
|
||||||
|
byte ready=0;
|
||||||
|
uint32_t wait = 8000;
|
||||||
|
// while not yet done or FIFO not yet empty
|
||||||
|
// bit 6: FIFO Empty
|
||||||
|
// bit 2 payload ready
|
||||||
|
int by=0;
|
||||||
|
while( (!ready || bitRead(value,6)==0) && (millis() - previous < wait) )
|
||||||
|
{
|
||||||
|
if( bitRead(value, 7) ) { Serial.println("FIFO full"); }
|
||||||
|
if( bitRead(value, 4) ) { Serial.println("FIFO overflow"); }
|
||||||
|
if( bitRead(value,2)==1 ) ready=1;
|
||||||
|
if( bitRead(value, 6) == 0 ) { // FIFO not empty
|
||||||
|
byte data = sx1278.readRegister(REG_FIFO);
|
||||||
|
process8N1data(data);
|
||||||
|
by++;
|
||||||
|
#if 0
|
||||||
|
if(di==1) {
|
||||||
|
int rssi=getRSSI();
|
||||||
|
int fei=getFEI();
|
||||||
|
int afc=getAFC();
|
||||||
|
Serial.print("Test: RSSI="); Serial.println(rssi);
|
||||||
|
Serial.print("Test: FEI="); Serial.println(fei);
|
||||||
|
Serial.print("Test: AFC="); Serial.println(afc);
|
||||||
|
sonde.si()->rssi = rssi;
|
||||||
|
sonde.si()->afc = afc;
|
||||||
|
}
|
||||||
|
if(di>520) {
|
||||||
|
// TODO
|
||||||
|
Serial.println("TOO MUCH DATA");
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
previous = millis(); // reset timeout after receiving data
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
value = sx1278.readRegister(REG_IRQ_FLAGS2);
|
||||||
|
}
|
||||||
|
Serial.printf("processed %d bytes before end/timeout\n", by);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/////
|
||||||
|
#if 0
|
||||||
|
int e = sx1278.receivePacketTimeout(1000, data+8);
|
||||||
|
if(e) { Serial.println("TIMEOUT"); return RX_TIMEOUT; } //if timeout... return 1
|
||||||
|
|
||||||
|
printRaw(data, RS92MAXLEN);
|
||||||
|
//for(int i=0; i<RS92MAXLEN; i++) { data[i] = reverse(data[i]); }
|
||||||
|
//printRaw(data, MAXLEN);
|
||||||
|
//for(int i=0; i<RS92MAXLEN; i++) { data[i] = data[i] ^ scramble[i&0x3F]; }
|
||||||
|
//printRaw(data, MAXLEN);
|
||||||
|
//int res = decode41(data, RS92MAXLEN);
|
||||||
|
#endif
|
||||||
|
int res=0;
|
||||||
|
return res==0 ? RX_OK : RX_ERROR;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
RS92 rs92 = RS92();
|
||||||
96
libraries/SondeLib/RS92.h
Executable file
96
libraries/SondeLib/RS92.h
Executable file
|
|
@ -0,0 +1,96 @@
|
||||||
|
/*
|
||||||
|
* RS92.h
|
||||||
|
* Functions for decoding RS92 sondes with SX127x chips
|
||||||
|
* Copyright (C) 2019 Hansi Reiser, dl9rdz
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef RS92_h
|
||||||
|
#define RS92_h
|
||||||
|
|
||||||
|
#include <stdlib.h>
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <Arduino.h>
|
||||||
|
#ifndef inttypes_h
|
||||||
|
#include <inttypes.h>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
struct CONTEXTR9 {
|
||||||
|
char calibdata[512];
|
||||||
|
uint32_t calibok;
|
||||||
|
char mesok;
|
||||||
|
char posok;
|
||||||
|
char framesent;
|
||||||
|
double lat;
|
||||||
|
double lon;
|
||||||
|
double heig;
|
||||||
|
double speed;
|
||||||
|
double dir;
|
||||||
|
double climb;
|
||||||
|
double lastlat;
|
||||||
|
double laslong;
|
||||||
|
double lastalt;
|
||||||
|
double lastspeed;
|
||||||
|
double lastdir;
|
||||||
|
double lastclb;
|
||||||
|
float hrmsc;
|
||||||
|
float vrmsc;
|
||||||
|
double hp;
|
||||||
|
double hyg;
|
||||||
|
double temp;
|
||||||
|
double ozontemp;
|
||||||
|
double ozon;
|
||||||
|
uint32_t goodsats;
|
||||||
|
uint32_t timems;
|
||||||
|
uint32_t framenum;
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
/* Main class */
|
||||||
|
class RS92
|
||||||
|
{
|
||||||
|
private:
|
||||||
|
void process8N1data(uint8_t data);
|
||||||
|
void stobyte92(uint8_t byte);
|
||||||
|
void decodeframe92(uint8_t *data);
|
||||||
|
#if 0
|
||||||
|
void dogps(const uint8_t *sf, int sf_len,
|
||||||
|
struct CONTEXTR9 * cont, uint32_t * timems,
|
||||||
|
uint32_t * gpstime);
|
||||||
|
#endif
|
||||||
|
uint32_t bits2val(const uint8_t *bits, int len);
|
||||||
|
void printRaw(uint8_t *data, int len);
|
||||||
|
int bitsToBytes(uint8_t *bits, uint8_t *bytes, int len);
|
||||||
|
int decode92(byte *data, int maxlen);
|
||||||
|
|
||||||
|
uint8_t hamming_conf[ 7*8]; // 7*8=56
|
||||||
|
uint8_t hamming_dat1[13*8]; // 13*8=104
|
||||||
|
uint8_t hamming_dat2[13*8];
|
||||||
|
|
||||||
|
uint8_t block_conf[ 7*4]; // 7*4=28
|
||||||
|
uint8_t block_dat1[13*4]; // 13*4=52
|
||||||
|
uint8_t block_dat2[13*4];
|
||||||
|
|
||||||
|
uint8_t H[4][8] = // extended Hamming(8,4) particy check matrix
|
||||||
|
{{ 0, 1, 1, 1, 1, 0, 0, 0},
|
||||||
|
{ 1, 0, 1, 1, 0, 1, 0, 0},
|
||||||
|
{ 1, 1, 0, 1, 0, 0, 1, 0},
|
||||||
|
{ 1, 1, 1, 0, 0, 0, 0, 1}};
|
||||||
|
uint8_t He[8] = { 0x7, 0xB, 0xD, 0xE, 0x8, 0x4, 0x2, 0x1}; // Spalten von H:
|
||||||
|
// 1-bit-error-Syndrome
|
||||||
|
boolean initialized = false;
|
||||||
|
|
||||||
|
public:
|
||||||
|
RS92();
|
||||||
|
int setup(float frequency);
|
||||||
|
int receive();
|
||||||
|
int waitRXcomplete();
|
||||||
|
|
||||||
|
int use_ecc = 1;
|
||||||
|
};
|
||||||
|
|
||||||
|
extern RS92 rs92;
|
||||||
|
|
||||||
|
#endif
|
||||||
113
libraries/SondeLib/Scanner.cpp
Executable file
113
libraries/SondeLib/Scanner.cpp
Executable file
|
|
@ -0,0 +1,113 @@
|
||||||
|
#include "Scanner.h"
|
||||||
|
#include <SX1278FSK.h>
|
||||||
|
#include <U8x8lib.h>
|
||||||
|
|
||||||
|
#include "Sonde.h"
|
||||||
|
#include "Display.h"
|
||||||
|
|
||||||
|
#define CHANBW 10
|
||||||
|
#define PIXSAMPL (50/CHANBW)
|
||||||
|
#define SMOOTH 3
|
||||||
|
//#define STARTF 401000000
|
||||||
|
#define NCHAN ((int)(6000/CHANBW))
|
||||||
|
|
||||||
|
double STARTF = (sonde.config.startfreq * 1000000);
|
||||||
|
//int CHANBW = (sonde.config.channelbw);
|
||||||
|
//int NCHAN = ((int)(6000/CHANBW));
|
||||||
|
//int PIXSAMPL = (50/CHANBW);
|
||||||
|
|
||||||
|
int scanresult[NCHAN];
|
||||||
|
int scandisp[NCHAN/PIXSAMPL];
|
||||||
|
|
||||||
|
#define PLOT_N 128
|
||||||
|
#define TICK1 (128/6)
|
||||||
|
#define TICK2 (TICK1/4)
|
||||||
|
//#define PLOT_MIN -250
|
||||||
|
#define PLOT_MIN (sonde.config.noisefloor*2)
|
||||||
|
#define PLOT_SCALE(x) (x<PLOT_MIN?0:(x-PLOT_MIN)/2)
|
||||||
|
|
||||||
|
const byte tilepatterns[9]={0,0x80,0xC0,0xE0,0xF0,0xF8,0xFC,0xFE,0xFF};
|
||||||
|
void Scanner::fillTiles(uint8_t *row, int value) {
|
||||||
|
for(int y=0; y<8; y++) {
|
||||||
|
int nbits = value - 8*(7-y);
|
||||||
|
if(nbits<0) { row[8*y]=0; continue; }
|
||||||
|
if(nbits>=8) { row[8*y]=255; continue; }
|
||||||
|
row[8*y] = tilepatterns[nbits];
|
||||||
|
}
|
||||||
|
}
|
||||||
|
/*
|
||||||
|
* There are 16*8 columns to plot, NPLOT must be lower than that
|
||||||
|
* currently, we use 128 * 50kHz channels
|
||||||
|
* There are 8*8 values to plot; MIN is bottom end,
|
||||||
|
*/
|
||||||
|
uint8_t tiles[16] = { 0x0f,0x0f,0x0f,0x0f,0xf0,0xf0,0xf0,0xf0, 1, 3, 7, 15, 31, 63, 127, 255};
|
||||||
|
void Scanner::plotResult()
|
||||||
|
{
|
||||||
|
uint8_t row[8*8];
|
||||||
|
for(int i=0; i<PLOT_N; i+=8) {
|
||||||
|
for(int j=0; j<8; j++) {
|
||||||
|
fillTiles(row+j, PLOT_SCALE(scandisp[i+j]));
|
||||||
|
if( ((i+j)%TICK1)==0) { row[j] |= 0x07; }
|
||||||
|
if( ((i+j)%TICK2)==0) { row[j] |= 0x01; }
|
||||||
|
}
|
||||||
|
for(int y=0; y<8; y++) {
|
||||||
|
if(sonde.config.marker && y==1) {
|
||||||
|
// don't overwrite MHz marker text
|
||||||
|
if(i<3*8 || (i>=7*8&&i<10*8) || i>=13*8) continue;
|
||||||
|
}
|
||||||
|
disp.rdis->drawTile(i/8, y, 1, row+8*y);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void Scanner::scan()
|
||||||
|
{
|
||||||
|
// Configure
|
||||||
|
sx1278.writeRegister(REG_PLL_HOP, 0x80); // FastHopOn
|
||||||
|
sx1278.setRxBandwidth(CHANBW*1000);
|
||||||
|
sx1278.writeRegister(REG_RSSI_CONFIG, SMOOTH&0x07);
|
||||||
|
sx1278.setFrequency(STARTF);
|
||||||
|
sx1278.writeRegister(REG_OP_MODE, FSK_RX_MODE);
|
||||||
|
delay(20);
|
||||||
|
|
||||||
|
unsigned long start = millis();
|
||||||
|
uint32_t lastfrf=-1;
|
||||||
|
for(int iter=0; iter<2; iter++) { // two interations, to catch all RS41 transmissions
|
||||||
|
for(int i=0; i<NCHAN; i++) {
|
||||||
|
float freq = STARTF + 1000.0*i*CHANBW;
|
||||||
|
uint32_t frf = freq * 1.0 * (1<<19) / SX127X_CRYSTAL_FREQ;
|
||||||
|
if( (lastfrf>>16)!=(frf>>16) ) {
|
||||||
|
sx1278.writeRegister(REG_FRF_MSB, (frf&0xff0000)>>16);
|
||||||
|
}
|
||||||
|
if( ((lastfrf&0x00ff00)>>8) != ((frf&0x00ff00)>>8) ) {
|
||||||
|
sx1278.writeRegister(REG_FRF_MID, (frf&0x00ff00)>>8);
|
||||||
|
}
|
||||||
|
sx1278.writeRegister(REG_FRF_LSB, (frf&0x0000ff));
|
||||||
|
lastfrf = frf;
|
||||||
|
// Wait TS_HOP (20us) + TS_RSSI ( 2^(SMOOTH+1) / 4 / CHANBW us)
|
||||||
|
int wait = 20 + 1000*(1<<(SMOOTH+1))/4/CHANBW;
|
||||||
|
delayMicroseconds(wait+5);
|
||||||
|
int rssi = -(int)sx1278.readRegister(REG_RSSI_VALUE_FSK);
|
||||||
|
if(iter==0) { scanresult[i] = rssi; } else {
|
||||||
|
if(rssi>scanresult[i]) scanresult[i]=rssi;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
unsigned long duration = millis()-start;
|
||||||
|
Serial.print("Scan time: ");
|
||||||
|
Serial.println(duration);
|
||||||
|
for(int i=0; i<NCHAN; i+=PIXSAMPL) {
|
||||||
|
scandisp[i/PIXSAMPL]=scanresult[i];
|
||||||
|
for(int j=1; j<PIXSAMPL; j++) { scandisp[i/PIXSAMPL]+=scanresult[i+j]; }
|
||||||
|
//for(int j=1; j<PIXSAMPL; j++) { if(scanresult[i+j]>scandisp[i/PIXSAMPL]) scandisp[i/PIXSAMPL] = scanresult[i+j]; }
|
||||||
|
Serial.print(scanresult[i]); Serial.print(", ");
|
||||||
|
}
|
||||||
|
Serial.println("\n");
|
||||||
|
for(int i=0; i<NCHAN/PIXSAMPL; i++) {
|
||||||
|
scandisp[i]/=PIXSAMPL;
|
||||||
|
Serial.print(scandisp[i]); Serial.print(", ");
|
||||||
|
}
|
||||||
|
Serial.println("\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
Scanner scanner = Scanner();
|
||||||
24
libraries/SondeLib/Scanner.h
Executable file
24
libraries/SondeLib/Scanner.h
Executable file
|
|
@ -0,0 +1,24 @@
|
||||||
|
|
||||||
|
|
||||||
|
#ifndef _SCANNER_H
|
||||||
|
#define _SCANNER_H
|
||||||
|
|
||||||
|
#include <stdlib.h>
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <Arduino.h>
|
||||||
|
#ifndef inttypes_h
|
||||||
|
#include <inttypes.h>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
class Scanner
|
||||||
|
{
|
||||||
|
private:
|
||||||
|
void fillTiles(uint8_t *row, int value);
|
||||||
|
|
||||||
|
public:
|
||||||
|
void plotResult();
|
||||||
|
void scan(void);
|
||||||
|
};
|
||||||
|
|
||||||
|
extern Scanner scanner;
|
||||||
|
#endif
|
||||||
689
libraries/SondeLib/Sonde.cpp
Executable file
689
libraries/SondeLib/Sonde.cpp
Executable file
|
|
@ -0,0 +1,689 @@
|
||||||
|
#include <U8x8lib.h>
|
||||||
|
#include <U8g2lib.h>
|
||||||
|
|
||||||
|
#include "Sonde.h"
|
||||||
|
#include "RS41.h"
|
||||||
|
#include "RS92.h"
|
||||||
|
#include "DFM.h"
|
||||||
|
#include "M10.h"
|
||||||
|
#include "SX1278FSK.h"
|
||||||
|
#include "Display.h"
|
||||||
|
#include <Wire.h>
|
||||||
|
|
||||||
|
#define SDCARD
|
||||||
|
|
||||||
|
#ifdef SDCARD
|
||||||
|
#include "sd.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
int snOn=0;
|
||||||
|
|
||||||
|
extern SX1278FSK sx1278;
|
||||||
|
|
||||||
|
RXTask rxtask = { -1, -1, -1, 0xFFFF, 0 };
|
||||||
|
|
||||||
|
const char *evstring[]={"NONE", "KEY1S", "KEY1D", "KEY1M", "KEY1L", "KEY2S", "KEY2D", "KEY2M", "KEY2L",
|
||||||
|
"VIEWTO", "RXTO", "NORXTO", "(max)"};
|
||||||
|
|
||||||
|
const char *RXstr[]={"RX_OK", "RX_TIMEOUT", "RX_ERROR", "RX_UNKNOWN"};
|
||||||
|
|
||||||
|
int fingerprintValue[]={ 17, 31, 64, 4, 55, 48, 23, 128+23, -1 };
|
||||||
|
const char *fingerprintText[]={
|
||||||
|
"TTGO T-Beam (new version 1.0), I2C not working after powerup, assuming 0.9\" OLED@21,22",
|
||||||
|
"TTGO LORA32 v2.1_1.6 (0.9\" OLED@21,22)",
|
||||||
|
"TTGO LORA v1.0 (0.9\" OLED@4,15)",
|
||||||
|
"Heltec v1/v2 (0.9\"OLED@4,15)",
|
||||||
|
"TTGO T-Beam (old version), 0.9\" OLED@21,22",
|
||||||
|
"TTGO T-Beam (old version), SPI TFT@4,21,22",
|
||||||
|
"TTGO T-Beam (new version 1.0), 0.9\" OLED@21,22",
|
||||||
|
"TTGO T-Beam (new version 1.0), SPI TFT@4,13,14",
|
||||||
|
};
|
||||||
|
|
||||||
|
int getKeyPressEvent(); /* in RX_FSK.ino */
|
||||||
|
|
||||||
|
/* Task model:
|
||||||
|
* There is a background task for all SX1278 interaction.
|
||||||
|
* - On startup and on each mode/frequency change (requested by setting requestNextSonde
|
||||||
|
* to an sonde index >=0) it calls Sonde::setup(), which will call the new decoder's
|
||||||
|
* setup function. Setup will update the value currentSonde.
|
||||||
|
* - Periodically it calls Sonde::receive(), which calls the current decoder's receive()
|
||||||
|
* function. It should return control to the SX1278 main loop at least once per second.
|
||||||
|
* It will also set the internal variable receiveResult. The decoder's receive function
|
||||||
|
* must make sure that there are no FIFI overflows in the SX1278.
|
||||||
|
* - the Arduino main loop will call the waitRXcomplete function, which should return as
|
||||||
|
* soon as there is some new data to display, or no later than after 1s, returning the
|
||||||
|
* value of receiveResult (or timeout, if receiveResult was not set within 1s). It
|
||||||
|
* should also return immediately if there is some keyboard input.
|
||||||
|
*/
|
||||||
|
int initlevels[40];
|
||||||
|
|
||||||
|
Sonde::Sonde() {
|
||||||
|
for (int i = 0; i < 39; i++) {
|
||||||
|
initlevels[i] = gpio_get_level((gpio_num_t)i);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void Sonde::defaultConfig() {
|
||||||
|
fingerprint = initlevels[4];
|
||||||
|
fingerprint = (fingerprint<<1) | initlevels[12];
|
||||||
|
fingerprint = (fingerprint<<1) | initlevels[16];
|
||||||
|
fingerprint = (fingerprint<<1) | initlevels[17];
|
||||||
|
fingerprint = (fingerprint<<1) | initlevels[21];
|
||||||
|
fingerprint = (fingerprint<<1) | initlevels[22];
|
||||||
|
fingerprint = (fingerprint<<1) | initlevels[23];
|
||||||
|
Serial.printf("Board fingerprint is %d\n", fingerprint);
|
||||||
|
|
||||||
|
sondeList = (SondeInfo *)malloc((MAXSONDE+1)*sizeof(SondeInfo));
|
||||||
|
memset(sondeList, 0, (MAXSONDE+1)*sizeof(SondeInfo));
|
||||||
|
config.touch_thresh = 70;
|
||||||
|
config.led_pout = -1;
|
||||||
|
config.power_pout = -1;
|
||||||
|
config.spectrum=10;
|
||||||
|
// Try autodetecting board type
|
||||||
|
// Seems like on startup, GPIO4 is 1 on v1 boards, 0 on v2.1 boards?
|
||||||
|
config.gpsOn=0;
|
||||||
|
config.gps_rxd = -1;
|
||||||
|
config.gps_txd = -1;
|
||||||
|
strcpy(config.gps_lat,"43.591");
|
||||||
|
strcpy(config.gps_lon,"7.100");
|
||||||
|
config.gps_alt=123;
|
||||||
|
config.oled_rst = 16;
|
||||||
|
config.disptype = 0;
|
||||||
|
config.oled_orient = 1;
|
||||||
|
config.button2_axp = 0;
|
||||||
|
config.norx_timeout = 20;
|
||||||
|
if(initlevels[16]==0) {
|
||||||
|
config.oled_sda = 4;
|
||||||
|
config.oled_scl = 15;
|
||||||
|
config.button_pin = 0;
|
||||||
|
config.button2_pin = T4 + 128; // T4 == GPIO13
|
||||||
|
config.power_pout = 21; // for Heltec v2
|
||||||
|
config.led_pout = 2;
|
||||||
|
Serial.println("Autoconfig: looks like TTGO v1 / Heltec v1/V2 board");
|
||||||
|
} else {
|
||||||
|
config.oled_sda = 21;
|
||||||
|
config.oled_scl = 22;
|
||||||
|
if(initlevels[17]==0) { // T-Beam
|
||||||
|
if(initlevels[12]==0) { // T-Beam v1.0
|
||||||
|
Serial.println("Autoconfig: looks like T-Beam 1.0 board");
|
||||||
|
config.button_pin = 38;
|
||||||
|
config.button2_pin = 15 + 128; //T4 + 128; // T4 = GPIO13
|
||||||
|
// Maybe in future use as default only PWR as button2?
|
||||||
|
//config.button2_pin = 255;
|
||||||
|
config.button2_axp = 1;
|
||||||
|
config.gps_rxd = 34;
|
||||||
|
// Check for I2C-Display@21,22
|
||||||
|
#define SSD1306_ADDRESS 0x3c
|
||||||
|
Wire.begin(21, 22);
|
||||||
|
Wire.beginTransmission(SSD1306_ADDRESS);
|
||||||
|
byte err = Wire.endTransmission();
|
||||||
|
delay(100); // otherwise its too fast?!
|
||||||
|
Wire.beginTransmission(SSD1306_ADDRESS);
|
||||||
|
err = Wire.endTransmission();
|
||||||
|
if(err!=0 && fingerprint!=17) { // hmm. 17 after powerup with oled commected and no i2c answer!?!?
|
||||||
|
fingerprint |= 128;
|
||||||
|
Serial.println("no I2C display found, assuming large TFT display\n");
|
||||||
|
// CS=0, RST=14, RS=2, SDA=4, CLK=13
|
||||||
|
Serial.println("... with large TFT display\n");
|
||||||
|
config.disptype = 1;
|
||||||
|
config.oled_sda = 4;
|
||||||
|
config.oled_scl = 13;
|
||||||
|
config.oled_rst = 14;
|
||||||
|
config.spectrum = -1; // no spectrum for now on large display
|
||||||
|
} else {
|
||||||
|
// OLED display, pins 21,22 ok...
|
||||||
|
config.disptype = 0;
|
||||||
|
Serial.println("... with small OLED display\n");
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
Serial.println("Autoconfig: looks like T-Beam v0.7 board");
|
||||||
|
config.button_pin = 39;
|
||||||
|
config.button2_pin = T4 + 128; // T4 == GPIO13
|
||||||
|
config.gps_rxd = 12;
|
||||||
|
// Check if we possibly have a large display
|
||||||
|
if(initlevels[21]==0) {
|
||||||
|
Serial.println("Autoconfig: looks like T-Beam v0.7 board with large TFT display");
|
||||||
|
config.disptype = 1;
|
||||||
|
config.oled_sda = 4;
|
||||||
|
config.oled_scl = 21;
|
||||||
|
config.oled_rst = 22;
|
||||||
|
config.spectrum = -1; // no spectrum for now on large display
|
||||||
|
}
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
config.button_pin = 2 + 128; // GPIO2 / T2
|
||||||
|
config.button2_pin = 14 + 128; // GPIO14 / T6
|
||||||
|
config.led_pout = 25;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
//
|
||||||
|
config.noisefloor = -125;
|
||||||
|
strcpy(config.call,"NOCALL");
|
||||||
|
strcpy(config.passcode, "---");
|
||||||
|
strcpy(config.mdnsname, "radiosonde");
|
||||||
|
strcpy(config.vbatmax,"1.84");
|
||||||
|
strcpy(config.vbatmin,"1.64");
|
||||||
|
config.sdOn=0;
|
||||||
|
config.buzzerOn=0;
|
||||||
|
config.buzzerFreq=700;
|
||||||
|
config.buzzerPort=12;
|
||||||
|
config.dbsmetre=0;
|
||||||
|
config.maxsonde=15;
|
||||||
|
config.debug=0;
|
||||||
|
config.wifi=1;
|
||||||
|
config.wifiap=1;
|
||||||
|
config.display[0]=0;
|
||||||
|
config.display[1]=1;
|
||||||
|
config.display[2]=-1;
|
||||||
|
config.startfreq=400;
|
||||||
|
config.channelbw=10;
|
||||||
|
config.marker=0;
|
||||||
|
config.showafc=0;
|
||||||
|
config.freqofs=0;
|
||||||
|
config.rs41.agcbw=12500;
|
||||||
|
config.rs41.rxbw=6300;
|
||||||
|
config.rs92.rxbw=12500;
|
||||||
|
config.rs92.alt2d=480;
|
||||||
|
config.dfm.agcbw=20800;
|
||||||
|
config.dfm.rxbw=10400;
|
||||||
|
config.udpfeed.active = 1;
|
||||||
|
config.udpfeed.type = 0;
|
||||||
|
strcpy(config.udpfeed.host, "fra1od.fr.to");
|
||||||
|
strcpy(config.udpfeed.symbol, "/O");
|
||||||
|
config.udpfeed.port = 14580;
|
||||||
|
config.udpfeed.highrate = 1;
|
||||||
|
config.udpfeed.idformat = ID_DFMGRAW;
|
||||||
|
config.tcpfeed.active = 0;
|
||||||
|
config.tcpfeed.type = 1;
|
||||||
|
strcpy(config.tcpfeed.host, "radiosondy.info");
|
||||||
|
strcpy(config.tcpfeed.symbol, "/O");
|
||||||
|
config.tcpfeed.port = 14580;
|
||||||
|
config.tcpfeed.highrate = 10;
|
||||||
|
config.tcpfeed.idformat = ID_DFMDXL;
|
||||||
|
config.kisstnc.active = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
void Sonde::setConfig(const char *cfg) {
|
||||||
|
while(*cfg==' '||*cfg=='\t') cfg++;
|
||||||
|
if(*cfg=='#') return;
|
||||||
|
char *s = strchr(cfg,'=');
|
||||||
|
if(!s) return;
|
||||||
|
char *val = s+1;
|
||||||
|
*s=0; s--;
|
||||||
|
while(s>cfg && (*s==' '||*s=='\t')) { *s=0; s--; }
|
||||||
|
Serial.printf("configuration option '%s'=%s \n", cfg, val);
|
||||||
|
if(strcmp(cfg,"noisefloor")==0) {
|
||||||
|
config.noisefloor = atoi(val);
|
||||||
|
if(config.noisefloor==0) config.noisefloor=-130;
|
||||||
|
} else if(strcmp(cfg,"call")==0) {
|
||||||
|
strncpy(config.call, val, 9);
|
||||||
|
config.call[9]=0;
|
||||||
|
} else if(strcmp(cfg,"passcode")==0) {
|
||||||
|
strncpy(config.passcode, val, 9);
|
||||||
|
} else if(strcmp(cfg,"button_pin")==0) {
|
||||||
|
config.button_pin = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"button2_pin")==0) {
|
||||||
|
config.button2_pin = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"button2_axp")==0) {
|
||||||
|
config.button2_axp = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"touch_thresh")==0) {
|
||||||
|
config.touch_thresh = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"led_pout")==0) {
|
||||||
|
config.led_pout = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"power_pout")==0) {
|
||||||
|
config.power_pout = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"disptype")==0) {
|
||||||
|
config.disptype = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"oled_sda")==0) {
|
||||||
|
config.oled_sda = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"oled_scl")==0) {
|
||||||
|
config.oled_scl = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"oled_rst")==0) {
|
||||||
|
config.oled_rst = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"oled_orient")==0) {
|
||||||
|
config.oled_orient = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"gpsOn")==0) {
|
||||||
|
config.gpsOn = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"gps_rxd")==0) {
|
||||||
|
config.gps_rxd = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"gps_txd")==0) {
|
||||||
|
config.gps_txd = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"gps_lat")==0) {
|
||||||
|
strncpy(config.gps_lat, val, 8);
|
||||||
|
} else if(strcmp(cfg,"gps_lon")==0) {
|
||||||
|
strncpy(config.gps_lon, val, 8);
|
||||||
|
} else if(strcmp(cfg,"gps_alt")==0) {
|
||||||
|
config.gps_alt = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"maxsonde")==0) {
|
||||||
|
config.maxsonde = atoi(val);
|
||||||
|
if(config.maxsonde>MAXSONDE) config.maxsonde=MAXSONDE;
|
||||||
|
} else if(strcmp(cfg,"debug")==0) {
|
||||||
|
config.debug = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"wifi")==0) {
|
||||||
|
config.wifi = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"wifiap")==0) {
|
||||||
|
config.wifiap = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"mdnsname")==0) {
|
||||||
|
strncpy(config.mdnsname, val, 14);
|
||||||
|
} else if(strcmp(cfg,"vbatmax")==0) {
|
||||||
|
strncpy(config.vbatmax,val,5);
|
||||||
|
} else if(strcmp(cfg,"vbatmin")==0) {
|
||||||
|
strncpy(config.vbatmin,val,5);
|
||||||
|
} else if(strcmp(cfg,"sdOn")==0) {
|
||||||
|
config.sdOn=atoi(val);
|
||||||
|
} else if(strcmp(cfg,"buzzerOn")==0) {
|
||||||
|
config.buzzerOn=atoi(val);
|
||||||
|
} else if(strcmp(cfg,"buzzerPort")==0) {
|
||||||
|
config.buzzerPort=atoi(val);
|
||||||
|
} else if(strcmp(cfg,"buzzerFreq")==0) {
|
||||||
|
config.buzzerFreq=atoi(val);
|
||||||
|
} else if(strcmp(cfg,"dbsmetre")==0) {
|
||||||
|
config.dbsmetre=atoi(val);
|
||||||
|
} else if(strcmp(cfg,"display")==0) {
|
||||||
|
int i = 0;
|
||||||
|
char *ptr;
|
||||||
|
while(val) {
|
||||||
|
ptr = strchr(val,',');
|
||||||
|
if(ptr) *ptr = 0;
|
||||||
|
config.display[i++] = atoi(val);
|
||||||
|
val = ptr?ptr+1:NULL;
|
||||||
|
Serial.printf("appending value %d next is %s\n", config.display[i-1], val?val:"");
|
||||||
|
}
|
||||||
|
config.display[i] = -1;
|
||||||
|
} else if (strcmp(cfg, "norx_timeout")==0) {
|
||||||
|
config.norx_timeout = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"startfreq")==0) {
|
||||||
|
config.startfreq = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"channelbw")==0) {
|
||||||
|
config.channelbw = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"spectrum")==0) {
|
||||||
|
config.spectrum = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"marker")==0) {
|
||||||
|
config.marker = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"showafc")==0) {
|
||||||
|
config.showafc = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"freqofs")==0) {
|
||||||
|
config.freqofs = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"rs41.agcbw")==0) {
|
||||||
|
config.rs41.agcbw = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"rs41.rxbw")==0) {
|
||||||
|
config.rs41.rxbw = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"dfm.agcbw")==0) {
|
||||||
|
config.dfm.agcbw = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"dfm.rxbw")==0) {
|
||||||
|
config.dfm.rxbw = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"rs92.alt2d")==0) {
|
||||||
|
config.rs92.alt2d= atoi(val);
|
||||||
|
} else if(strcmp(cfg,"kisstnc.active")==0) {
|
||||||
|
config.kisstnc.active = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"kisstnc.idformat")==0) {
|
||||||
|
config.kisstnc.idformat = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"rs92.rxbw")==0) {
|
||||||
|
config.rs92.rxbw = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"axudp.active")==0) {
|
||||||
|
config.udpfeed.active = atoi(val)>0;
|
||||||
|
} else if(strcmp(cfg,"axudp.host")==0) {
|
||||||
|
strncpy(config.udpfeed.host, val, 63);
|
||||||
|
} else if(strcmp(cfg,"axudp.port")==0) {
|
||||||
|
config.udpfeed.port = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"axudp.symbol")==0) {
|
||||||
|
strncpy(config.udpfeed.symbol, val, 3);
|
||||||
|
} else if(strcmp(cfg,"axudp.highrate")==0) {
|
||||||
|
config.udpfeed.highrate = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"axudp.idformat")==0) {
|
||||||
|
config.udpfeed.idformat = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"tcp.active")==0) {
|
||||||
|
config.tcpfeed.active = atoi(val)>0;
|
||||||
|
} else if(strcmp(cfg,"tcp.host")==0) {
|
||||||
|
strncpy(config.tcpfeed.host, val, 63);
|
||||||
|
} else if(strcmp(cfg,"tcp.port")==0) {
|
||||||
|
config.tcpfeed.port = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"tcp.symbol")==0) {
|
||||||
|
strncpy(config.tcpfeed.symbol, val, 3);
|
||||||
|
} else if(strcmp(cfg,"tcp.highrate")==0) {
|
||||||
|
config.tcpfeed.highrate = atoi(val);
|
||||||
|
} else if(strcmp(cfg,"tcp.idformat")==0) {
|
||||||
|
config.tcpfeed.idformat = atoi(val);
|
||||||
|
} else {
|
||||||
|
Serial.printf("Invalid config option '%s'=%s \n", cfg, val);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void Sonde::setIP(String ip, bool AP) {
|
||||||
|
ipaddr = ip;
|
||||||
|
isAP = AP;
|
||||||
|
}
|
||||||
|
|
||||||
|
void Sonde::clearSonde() {
|
||||||
|
nSonde = 0;
|
||||||
|
}
|
||||||
|
void Sonde::addSonde(float frequency, SondeType type, int active, char *launchsite) {
|
||||||
|
if(nSonde>=config.maxsonde) {
|
||||||
|
Serial.println("Cannot add another sonde, MAXSONDE reached");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
Serial.printf("Adding %f - %d - %d - %s\n", frequency, type, active, launchsite);
|
||||||
|
sondeList[nSonde].type = type;
|
||||||
|
sondeList[nSonde].freq = frequency;
|
||||||
|
sondeList[nSonde].active = active;
|
||||||
|
strncpy(sondeList[nSonde].launchsite, launchsite, 17);
|
||||||
|
memcpy(sondeList[nSonde].rxStat, "\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3", 18); // unknown/undefined
|
||||||
|
nSonde++;
|
||||||
|
}
|
||||||
|
|
||||||
|
// called by updateState (only)
|
||||||
|
void Sonde::nextConfig() {
|
||||||
|
currentSonde++;
|
||||||
|
if(currentSonde>=nSonde) {
|
||||||
|
currentSonde=0;
|
||||||
|
}
|
||||||
|
// Skip non-active entries (but don't loop forever if there are no active ones)
|
||||||
|
for(int i=0; i<config.maxsonde; i++) {
|
||||||
|
if(!sondeList[currentSonde].active) {
|
||||||
|
currentSonde++;
|
||||||
|
if(currentSonde>=nSonde) currentSonde=0;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
void Sonde::nextRxSonde() {
|
||||||
|
rxtask.currentSonde++;
|
||||||
|
if(rxtask.currentSonde>=nSonde) {
|
||||||
|
rxtask.currentSonde=0;
|
||||||
|
}
|
||||||
|
for(int i=0; i<config.maxsonde; i++) {
|
||||||
|
if(!sondeList[rxtask.currentSonde].active) {
|
||||||
|
rxtask.currentSonde++;
|
||||||
|
if(rxtask.currentSonde>=nSonde) rxtask.currentSonde=0;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
Serial.printf("nextRxSonde: %d\n", rxtask.currentSonde);
|
||||||
|
}
|
||||||
|
void Sonde::nextRxFreq(int addkhz) {
|
||||||
|
// last entry is for the variable frequency
|
||||||
|
rxtask.currentSonde = nSonde - 1;
|
||||||
|
sondeList[rxtask.currentSonde].active = 1;
|
||||||
|
sondeList[rxtask.currentSonde].freq += addkhz*0.001;
|
||||||
|
if(sondeList[rxtask.currentSonde].freq>406)
|
||||||
|
sondeList[rxtask.currentSonde].freq = 400;
|
||||||
|
Serial.printf("nextRxFreq: %d\n", rxtask.currentSonde);
|
||||||
|
}
|
||||||
|
SondeInfo *Sonde::si() {
|
||||||
|
return &sondeList[currentSonde];
|
||||||
|
}
|
||||||
|
|
||||||
|
void Sonde::setup() {
|
||||||
|
if(rxtask.currentSonde<0 || rxtask.currentSonde>=config.maxsonde) {
|
||||||
|
Serial.print("Invalid rxtask.currentSonde: ");
|
||||||
|
Serial.println(rxtask.currentSonde);
|
||||||
|
rxtask.currentSonde = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
// update receiver config
|
||||||
|
Serial.print("\nSonde::setup() on sonde index ");
|
||||||
|
Serial.println(rxtask.currentSonde);
|
||||||
|
switch(sondeList[rxtask.currentSonde].type) {
|
||||||
|
case STYPE_RS41:
|
||||||
|
rs41.setup(sondeList[rxtask.currentSonde].freq * 1000000);
|
||||||
|
break;
|
||||||
|
case STYPE_DFM06:
|
||||||
|
case STYPE_DFM09:
|
||||||
|
dfm.setup( sondeList[rxtask.currentSonde].freq * 1000000, sondeList[rxtask.currentSonde].type==STYPE_DFM06?0:1 );
|
||||||
|
break;
|
||||||
|
case STYPE_RS92:
|
||||||
|
rs92.setup( sondeList[rxtask.currentSonde].freq * 1000000);
|
||||||
|
break;
|
||||||
|
case STYPE_M10:
|
||||||
|
m10.setup( sondeList[rxtask.currentSonde].freq * 1000000);
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
// debug
|
||||||
|
float afcbw = sx1278.getAFCBandwidth();
|
||||||
|
float rxbw = sx1278.getRxBandwidth();
|
||||||
|
Serial.printf("AFC BW: %f RX BW: %f\n", afcbw, rxbw);
|
||||||
|
}
|
||||||
|
|
||||||
|
extern void flashLed(int ms);
|
||||||
|
extern void buzzerLed(int temps);
|
||||||
|
void Sonde::receive() {
|
||||||
|
uint16_t res = 0;
|
||||||
|
SondeInfo *si = &sondeList[rxtask.currentSonde];
|
||||||
|
switch(si->type) {
|
||||||
|
case STYPE_RS41:
|
||||||
|
res = rs41.receive();
|
||||||
|
break;
|
||||||
|
case STYPE_RS92:
|
||||||
|
res = rs92.receive();
|
||||||
|
break;
|
||||||
|
case STYPE_M10:
|
||||||
|
res = m10.receive();
|
||||||
|
break;
|
||||||
|
case STYPE_DFM06:
|
||||||
|
case STYPE_DFM09:
|
||||||
|
res = dfm.receive();
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
|
||||||
|
// state information for RX_TIMER / NORX_TIMER events
|
||||||
|
if(res==0) { // RX OK
|
||||||
|
flashLed(700);
|
||||||
|
if(sonde.config.buzzerOn==1) buzzerLed(500);
|
||||||
|
if(si->lastState != 1) {
|
||||||
|
si->rxStart = millis();
|
||||||
|
si->lastState = 1;
|
||||||
|
}
|
||||||
|
} else { // RX not ok
|
||||||
|
if(res==RX_ERROR) {
|
||||||
|
flashLed(100);
|
||||||
|
}
|
||||||
|
Serial.printf("RX result %d, laststate was %d\n", res, si->lastState);
|
||||||
|
if(si->lastState != 0) {
|
||||||
|
si->norxStart = millis();
|
||||||
|
si->lastState = 0;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
// Serial.printf("debug: res was %d, now lastState is %d\n", res, si->lastState);
|
||||||
|
|
||||||
|
|
||||||
|
// we should handle timer events here, because after returning from receive,
|
||||||
|
// we'll directly enter setup
|
||||||
|
rxtask.receiveSonde = rxtask.currentSonde; // pass info about decoded sonde to main loop
|
||||||
|
|
||||||
|
int event = getKeyPressEvent();
|
||||||
|
if (!event) event = timeoutEvent(si);
|
||||||
|
int action = (event==EVT_NONE) ? ACT_NONE : disp.layout->actions[event];
|
||||||
|
Serial.printf("event %x: action is %x\n", event, action);
|
||||||
|
// If action is to move to a different sonde index, we do update things here, set activate
|
||||||
|
// to force the sx1278 task to call sonde.setup(), and pass information about sonde to
|
||||||
|
// main loop (display update...)
|
||||||
|
if(action == ACT_NEXTSONDE || action==ACT_PREVSONDE || (action>64&&action<128) ) {
|
||||||
|
// handled here...
|
||||||
|
if(action==ACT_NEXTSONDE||action==ACT_PREVSONDE)
|
||||||
|
nextRxSonde();
|
||||||
|
else
|
||||||
|
nextRxFreq( action-64 );
|
||||||
|
action = ACT_SONDE(rxtask.currentSonde);
|
||||||
|
if(rxtask.activate==-1) {
|
||||||
|
// race condition here. maybe better use mutex. TODO
|
||||||
|
rxtask.activate = action;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
res = (action<<8) | (res&0xff);
|
||||||
|
Serial.printf("receive Result is %04x\n", res);
|
||||||
|
// let waitRXcomplete resume...
|
||||||
|
rxtask.receiveResult = res;
|
||||||
|
#ifdef SDCARD
|
||||||
|
if (sonde.config.sdOn==1){
|
||||||
|
sdwrite();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
|
||||||
|
// return (action<<8) | (rxresult)
|
||||||
|
uint16_t Sonde::waitRXcomplete() {
|
||||||
|
uint16_t res=0;
|
||||||
|
uint32_t t0 = millis();
|
||||||
|
rxloop:
|
||||||
|
while( rxtask.receiveResult==0xFFFF && millis()-t0 < 3000) { delay(50); }
|
||||||
|
if( rxtask.receiveResult == RX_UPDATERSSI ) {
|
||||||
|
rxtask.receiveResult = 0xFFFF;
|
||||||
|
Serial.print("RSSI update: ");
|
||||||
|
disp.updateDisplayRSSI();
|
||||||
|
goto rxloop;
|
||||||
|
}
|
||||||
|
|
||||||
|
if( rxtask.receiveResult==0xFFFF) {
|
||||||
|
Serial.println("TIMEOUT in waitRXcomplete. Should never happen!\n");
|
||||||
|
res = RX_TIMEOUT;
|
||||||
|
} else {
|
||||||
|
res = rxtask.receiveResult;
|
||||||
|
}
|
||||||
|
rxtask.receiveResult = 0xFFFF;
|
||||||
|
/// TODO: THis has caused an exception when swithcing back to spectrumm...
|
||||||
|
Serial.printf("waitRXcomplete returning %04x (%s)\n", res, (res&0xff)<4?RXstr[res&0xff]:"");
|
||||||
|
// currently used only by RS92
|
||||||
|
switch(sondeList[rxtask.receiveSonde].type) {
|
||||||
|
case STYPE_RS41:
|
||||||
|
rs41.waitRXcomplete();
|
||||||
|
break;
|
||||||
|
case STYPE_RS92:
|
||||||
|
rs92.waitRXcomplete();
|
||||||
|
break;
|
||||||
|
case STYPE_M10:
|
||||||
|
m10.waitRXcomplete();
|
||||||
|
break;
|
||||||
|
case STYPE_DFM06:
|
||||||
|
case STYPE_DFM09:
|
||||||
|
dfm.waitRXcomplete();
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
memmove(sonde.si()->rxStat+1, sonde.si()->rxStat, 17);
|
||||||
|
sonde.si()->rxStat[0] = res;
|
||||||
|
return res;
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t Sonde::timeoutEvent(SondeInfo *si) {
|
||||||
|
uint32_t now = millis();
|
||||||
|
#if 1
|
||||||
|
Serial.printf("Timeout check: %d - %d vs %d; %d - %d vs %d; %d - %d vs %d\n",
|
||||||
|
now, si->viewStart, disp.layout->timeouts[0],
|
||||||
|
now, si->rxStart, disp.layout->timeouts[1],
|
||||||
|
now, si->norxStart, disp.layout->timeouts[2]);
|
||||||
|
#endif
|
||||||
|
Serial.printf("lastState is %d\n", si->lastState);
|
||||||
|
if(disp.layout->timeouts[0]>=0 && now - si->viewStart >= disp.layout->timeouts[0]) {
|
||||||
|
Serial.println("View timer expired");
|
||||||
|
return EVT_VIEWTO;
|
||||||
|
}
|
||||||
|
if(si->lastState==1 && disp.layout->timeouts[1]>=0 && now - si->rxStart >= disp.layout->timeouts[1]) {
|
||||||
|
Serial.println("RX timer expired");
|
||||||
|
return EVT_RXTO;
|
||||||
|
}
|
||||||
|
if(si->lastState==0 && disp.layout->timeouts[2]>=0 && now - si->norxStart >= disp.layout->timeouts[2]) {
|
||||||
|
Serial.println("NORX timer expired");
|
||||||
|
return EVT_NORXTO;
|
||||||
|
}
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
uint8_t Sonde::updateState(uint8_t event) {
|
||||||
|
Serial.printf("Sonde::updateState for event %d\n", event);
|
||||||
|
// No change
|
||||||
|
if(event==ACT_NONE) return 0xFF;
|
||||||
|
|
||||||
|
// In all cases (new display mode, new sonde) we reset the mode change timers
|
||||||
|
sonde.sondeList[sonde.currentSonde].viewStart = millis();
|
||||||
|
sonde.sondeList[sonde.currentSonde].lastState = -1;
|
||||||
|
|
||||||
|
// Moving to a different display mode
|
||||||
|
if (event==ACT_DISPLAY_SPECTRUM || event==ACT_DISPLAY_WIFI) {
|
||||||
|
// main loop will call setMode() and disable sx1278 background task
|
||||||
|
return event;
|
||||||
|
}
|
||||||
|
int n = event;
|
||||||
|
if(event==ACT_DISPLAY_DEFAULT) {
|
||||||
|
n = config.display[1];
|
||||||
|
} else if(event==ACT_DISPLAY_SCANNER) {
|
||||||
|
n= config.display[0];
|
||||||
|
} else if(event==ACT_DISPLAY_NEXT) {
|
||||||
|
int i;
|
||||||
|
for(i=0; config.display[i]!=-1; i++) {
|
||||||
|
if(config.display[i] == disp.layoutIdx) break;
|
||||||
|
}
|
||||||
|
if(config.display[i]==-1 || config.display[i+1]==-1) {
|
||||||
|
//unknown index, or end of list => loop to start
|
||||||
|
n = config.display[1];
|
||||||
|
} else {
|
||||||
|
n = config.display[i+1];
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if(n>=0 && n<ACT_MAXDISPLAY) {
|
||||||
|
if(n>=disp.nLayouts) {
|
||||||
|
Serial.println("WARNNG: next layout out of range");
|
||||||
|
n = config.display[1];
|
||||||
|
}
|
||||||
|
Serial.printf("Setting display mode %d\n", n);
|
||||||
|
disp.setLayout(n);
|
||||||
|
sonde.clearDisplay();
|
||||||
|
return 0xFF;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Moving to a different value for currentSonde
|
||||||
|
// TODO: THis should be done in sx1278 task, not in main loop!!!!!
|
||||||
|
if(event==ACT_NEXTSONDE) {
|
||||||
|
sonde.nextConfig();
|
||||||
|
Serial.printf("advancing to next sonde %d\n", sonde.currentSonde);
|
||||||
|
return event;
|
||||||
|
}
|
||||||
|
if (event==ACT_PREVSONDE) {
|
||||||
|
// TODO
|
||||||
|
Serial.printf("previous not supported, advancing to next sonde\n");
|
||||||
|
sonde.nextConfig();
|
||||||
|
return ACT_NEXTSONDE;
|
||||||
|
}
|
||||||
|
if(event&0x80) {
|
||||||
|
sonde.currentSonde = (event&0x7F);
|
||||||
|
return ACT_NEXTSONDE;
|
||||||
|
}
|
||||||
|
return 0xFF;
|
||||||
|
}
|
||||||
|
|
||||||
|
void Sonde::updateDisplayPos() {
|
||||||
|
disp.updateDisplayPos();
|
||||||
|
}
|
||||||
|
|
||||||
|
void Sonde::updateDisplayPos2() {
|
||||||
|
disp.updateDisplayPos2();
|
||||||
|
}
|
||||||
|
|
||||||
|
void Sonde::updateDisplayID() {
|
||||||
|
disp.updateDisplayID();
|
||||||
|
}
|
||||||
|
|
||||||
|
void Sonde::updateDisplayRSSI() {
|
||||||
|
disp.updateDisplayRSSI();
|
||||||
|
}
|
||||||
|
|
||||||
|
void Sonde::updateStat() {
|
||||||
|
disp.updateStat();
|
||||||
|
}
|
||||||
|
|
||||||
|
void Sonde::updateDisplayRXConfig() {
|
||||||
|
disp.updateDisplayRXConfig();
|
||||||
|
}
|
||||||
|
|
||||||
|
void Sonde::updateDisplayIP() {
|
||||||
|
disp.updateDisplayIP();
|
||||||
|
}
|
||||||
|
|
||||||
|
void Sonde::updateDisplay()
|
||||||
|
{
|
||||||
|
int t = millis();
|
||||||
|
disp.updateDisplay();
|
||||||
|
Serial.printf("updateDisplay took %d ms\n", (int)(millis()-t));
|
||||||
|
}
|
||||||
|
|
||||||
|
void Sonde::clearDisplay() {
|
||||||
|
disp.rdis->clear();
|
||||||
|
}
|
||||||
|
|
||||||
|
Sonde sonde = Sonde();
|
||||||
265
libraries/SondeLib/Sonde.h
Executable file
265
libraries/SondeLib/Sonde.h
Executable file
|
|
@ -0,0 +1,265 @@
|
||||||
|
|
||||||
|
#ifndef Sonde_h
|
||||||
|
#define Sonde_h
|
||||||
|
|
||||||
|
// RX_TIMEOUT: no header detected
|
||||||
|
// RX_ERROR: header detected, but data not decoded (crc error, etc.)
|
||||||
|
// RX_OK: header and data ok
|
||||||
|
enum RxResult { RX_OK, RX_TIMEOUT, RX_ERROR, RX_UNKNOWN, RX_NOPOS };
|
||||||
|
#define RX_UPDATERSSI 0xFFFE
|
||||||
|
|
||||||
|
// Events that change what is displayed (mode, sondenr)
|
||||||
|
// Keys:
|
||||||
|
// 1 Button (short) or Touch (short)
|
||||||
|
// 2 Button (double) or Touch (double)
|
||||||
|
// 3 Button (mid) or Touch (mid)
|
||||||
|
// 4 Button (long) or Touch (long)
|
||||||
|
// 5 Touch1/2 (short)
|
||||||
|
// 6 Touch1/2 (double)
|
||||||
|
// 7 Touch1/2 (mid)
|
||||||
|
// 8 Touch1/2 (long)
|
||||||
|
|
||||||
|
/* Keypress => Sonde++ / Sonde-- / Display:=N*/
|
||||||
|
enum Events { EVT_NONE, EVT_KEY1SHORT, EVT_KEY1DOUBLE, EVT_KEY1MID, EVT_KEY1LONG,
|
||||||
|
EVT_KEY2SHORT, EVT_KEY2DOUBLE, EVT_KEY2MID, EVT_KEY2LONG,
|
||||||
|
EVT_VIEWTO, EVT_RXTO, EVT_NORXTO,
|
||||||
|
EVT_MAX };
|
||||||
|
extern const char *evstring[];
|
||||||
|
extern const char *RXstr[];
|
||||||
|
#define EVENTNAME(s) evstring[s]
|
||||||
|
|
||||||
|
//int8_t actions[EVT_MAX];
|
||||||
|
#define ACT_NONE 255
|
||||||
|
#define ACT_DISPLAY(n) (n)
|
||||||
|
#define ACT_MAXDISPLAY 50
|
||||||
|
#define ACT_DISPLAY_SCANNER 0
|
||||||
|
#define ACT_DISPLAY_NEXT 64
|
||||||
|
#define ACT_DISPLAY_DEFAULT 63
|
||||||
|
#define ACT_DISPLAY_SPECTRUM 62
|
||||||
|
#define ACT_DISPLAY_WIFI 61
|
||||||
|
#define ACT_NEXTSONDE 65
|
||||||
|
#define ACT_PREVSONDE 66
|
||||||
|
#define ACT_ADDFREQ(n) ((n)+64)
|
||||||
|
#define ACT_SONDE(n) ((n)+128)
|
||||||
|
|
||||||
|
// 0000nnnn => goto display nnnn
|
||||||
|
// 01000000 => goto sonde -1
|
||||||
|
// 01000001 => goto sonde +1
|
||||||
|
|
||||||
|
#define NSondeTypes 5
|
||||||
|
enum SondeType { STYPE_DFM06, STYPE_DFM09, STYPE_RS41, STYPE_RS92, STYPE_M10 };
|
||||||
|
extern const char *sondeTypeStr[NSondeTypes];
|
||||||
|
|
||||||
|
typedef struct st_sondeinfo {
|
||||||
|
// receiver configuration
|
||||||
|
bool active;
|
||||||
|
SondeType type;
|
||||||
|
float freq;
|
||||||
|
// decoded ID
|
||||||
|
char id[10];
|
||||||
|
char ser[12];
|
||||||
|
bool validID;
|
||||||
|
char launchsite[18];
|
||||||
|
// decoded position
|
||||||
|
float lat; // latitude
|
||||||
|
float lon; // longitude
|
||||||
|
float az; // azimut
|
||||||
|
float vbat; // vbat %
|
||||||
|
float alt; // altitude
|
||||||
|
float vs; // vertical speed
|
||||||
|
float hs; // horizontal speed
|
||||||
|
float dir; // 0..360
|
||||||
|
uint8_t sats; // number of sats
|
||||||
|
uint8_t validPos; // bit pattern for validity of above 7 fields; 0x80: position is old
|
||||||
|
// decoded GPS time
|
||||||
|
uint32_t time;
|
||||||
|
uint16_t sec;
|
||||||
|
uint32_t frame;
|
||||||
|
bool validTime;
|
||||||
|
// RSSI from receiver
|
||||||
|
int rssi; // signal strength
|
||||||
|
int32_t afc; // afc correction value
|
||||||
|
// statistics
|
||||||
|
uint8_t rxStat[20];
|
||||||
|
uint32_t rxStart; // millis() timestamp of continuous rx start
|
||||||
|
uint32_t norxStart; // millis() timestamp of continuous no rx start
|
||||||
|
uint32_t viewStart; // millis() timestamp of viewinf this sonde with current display
|
||||||
|
int8_t lastState; // -1: disabled; 0: norx; 1: rx
|
||||||
|
// shut down timers, currently only for RS41; -1=disabled
|
||||||
|
int16_t launchKT, burstKT, countKT;
|
||||||
|
uint16_t crefKT; // frame number in which countKT was last sent
|
||||||
|
} SondeInfo;
|
||||||
|
// rxStat: 3=undef[empty] 1=timeout[.] 2=errro[E] 0=ok[|] 4=no valid position[°]
|
||||||
|
|
||||||
|
// Used for interacting with the RX background task
|
||||||
|
typedef struct st_RXTask {
|
||||||
|
// Variables set by Arduino main loop to value >=0 for requesting
|
||||||
|
// mode change to sonde reception for sonde <value) in RXTask.
|
||||||
|
// Will be reset to -1 by RXTask
|
||||||
|
int activate;
|
||||||
|
// Variables set by RXTask, corresponding to mode ST_DECODER (if active) or something else,
|
||||||
|
// and currently received sonde
|
||||||
|
int mainState;
|
||||||
|
int currentSonde;
|
||||||
|
// Variable set by RXTask to communicate status to Arduino task
|
||||||
|
// via waitRXcomplete function
|
||||||
|
uint16_t receiveResult;
|
||||||
|
uint16_t receiveSonde; // sonde inde corresponding to receiveResult
|
||||||
|
// status variabe set by decoder to indicate something is broken
|
||||||
|
// int fifoOverflow;
|
||||||
|
} RXTask;
|
||||||
|
|
||||||
|
extern RXTask rxtask;
|
||||||
|
|
||||||
|
struct st_rs41config {
|
||||||
|
int agcbw;
|
||||||
|
int rxbw;
|
||||||
|
};
|
||||||
|
struct st_rs92config {
|
||||||
|
int rxbw;
|
||||||
|
int alt2d;
|
||||||
|
};
|
||||||
|
struct st_dfmconfig {
|
||||||
|
int agcbw;
|
||||||
|
int rxbw;
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
enum IDTYPE { ID_DFMDXL, ID_DFMGRAW, ID_DFMAUTO };
|
||||||
|
|
||||||
|
struct st_feedinfo {
|
||||||
|
bool active;
|
||||||
|
int type; // 0:UDP(axudp), 1:TCP(aprs.fi)
|
||||||
|
char host[64];
|
||||||
|
int port;
|
||||||
|
char symbol[3];
|
||||||
|
int lowrate;
|
||||||
|
int highrate;
|
||||||
|
int lowlimit;
|
||||||
|
int idformat; // 0: dxl 1: real 2: auto
|
||||||
|
};
|
||||||
|
|
||||||
|
// maybe extend for external Bluetooth interface?
|
||||||
|
// internal bluetooth consumes too much memory
|
||||||
|
struct st_kisstnc {
|
||||||
|
bool active;
|
||||||
|
int idformat;
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
typedef struct st_rdzconfig {
|
||||||
|
// hardware configuration
|
||||||
|
int button_pin; // PIN port number menu button (+128 for touch mode)
|
||||||
|
int button2_pin; // PIN port number menu button (+128 for touch mode)
|
||||||
|
int button2_axp; // Use AXP192 power button as button2
|
||||||
|
int touch_thresh; // Threshold value (0..100) for touch input button
|
||||||
|
int led_pout; // POUT port number of LED (used as serial monitor)
|
||||||
|
int power_pout; // Power control pin (for Heltec v2)
|
||||||
|
int disptype; // 0=OLED; 1=ILI9225
|
||||||
|
int oled_sda; // OLED data pin
|
||||||
|
int oled_scl; // OLED clock pin
|
||||||
|
int oled_rst; // OLED reset pin
|
||||||
|
int oled_orient; // OLED orientation (default: 1)
|
||||||
|
int gpsOn; // GPS Active On=1/Off=0
|
||||||
|
int gps_rxd; // GPS module RXD pin. We expect 9600 baud NMEA data.
|
||||||
|
int gps_txd; // GPS module TXD pin
|
||||||
|
char gps_lat[20]; // QTH no gps latitude
|
||||||
|
char gps_lon[20]; // QTH no gps longitude
|
||||||
|
int gps_alt; // QTH no gps altitude
|
||||||
|
// software configuration
|
||||||
|
int debug; // show port and config options after reboot
|
||||||
|
int wifi; // connect to known WLAN 0=skip
|
||||||
|
int wifiap; // enable/disable WiFi AccessPoint mode 0=disable
|
||||||
|
int8_t display[30]; // list of display mode (0:scanner, 1:default, 2,... additional modes)
|
||||||
|
int startfreq; // spectrum display start freq (400, 401, ...)
|
||||||
|
int channelbw; // spectrum channel bandwidth (valid: 5, 10, 20, 25, 50, 100 kHz)
|
||||||
|
int spectrum; // show freq spectrum for n seconds -1=disable; 0=forever
|
||||||
|
int marker; // show freq marker in spectrum 0=disable
|
||||||
|
int maxsonde; // number of max sonde in scan (range=1-99)
|
||||||
|
int norx_timeout; // Time after which rx mode switches to scan mode (without rx signal)
|
||||||
|
int noisefloor; // for spectrum display
|
||||||
|
char mdnsname[15]; // mDNS-Name, defaults to rdzsonde
|
||||||
|
char vbatmax[5]; // Vbat maxi when bat charged
|
||||||
|
char vbatmin[5]; // Vbat minimum discharged
|
||||||
|
int sdOn; // Active SDCard
|
||||||
|
int buzzerPort; // Buzzer port
|
||||||
|
int buzzerFreq; // Buzzer Frequency
|
||||||
|
int buzzerOn; // Buzzer On
|
||||||
|
int dbsmetre; // Db or Smetre display
|
||||||
|
// receiver configuration
|
||||||
|
int showafc; // show afc value in rx screen
|
||||||
|
int freqofs; // frequency offset (tuner config = rx frequency + freqofs) in Hz
|
||||||
|
struct st_rs41config rs41; // configuration options specific for RS41 receiver
|
||||||
|
struct st_rs92config rs92;
|
||||||
|
struct st_dfmconfig dfm;
|
||||||
|
// data feed configuration
|
||||||
|
// for now, one feed for each type is enough, but might get extended to more?
|
||||||
|
char call[10]; // APRS callsign
|
||||||
|
char passcode[9]; // APRS passcode
|
||||||
|
struct st_feedinfo udpfeed; // target for AXUDP messages
|
||||||
|
struct st_feedinfo tcpfeed; // target for APRS-IS TCP connections
|
||||||
|
struct st_kisstnc kisstnc; // target for KISS TNC (via TCP, mainly for APRSdroid)
|
||||||
|
} RDZConfig;
|
||||||
|
|
||||||
|
|
||||||
|
#define MAXSONDE 99
|
||||||
|
|
||||||
|
extern int fingerprintValue[];
|
||||||
|
extern const char *fingerprintText[];
|
||||||
|
|
||||||
|
class Sonde
|
||||||
|
{
|
||||||
|
private:
|
||||||
|
public:
|
||||||
|
RDZConfig config;
|
||||||
|
int fingerprint = 0;
|
||||||
|
int currentSonde = 0;
|
||||||
|
int nSonde;
|
||||||
|
String ipaddr;
|
||||||
|
bool isAP;
|
||||||
|
// moved to heap, saving space in .bss
|
||||||
|
//SondeInfo sondeList[MAXSONDE+1];
|
||||||
|
SondeInfo *sondeList;
|
||||||
|
|
||||||
|
Sonde();
|
||||||
|
void defaultConfig();
|
||||||
|
void setConfig(const char *str);
|
||||||
|
|
||||||
|
void clearSonde();
|
||||||
|
void addSonde(float frequency, SondeType type, int active, char *launchsite);
|
||||||
|
void nextConfig();
|
||||||
|
void nextRxSonde();
|
||||||
|
void nextRxFreq(int addkhz);
|
||||||
|
|
||||||
|
/* new interface */
|
||||||
|
void setup();
|
||||||
|
void receive();
|
||||||
|
uint16_t waitRXcomplete();
|
||||||
|
/* old and temp interface */
|
||||||
|
#if 0
|
||||||
|
void processRXbyte(uint8_t data);
|
||||||
|
int receiveFrame();
|
||||||
|
#endif
|
||||||
|
|
||||||
|
SondeInfo *si();
|
||||||
|
|
||||||
|
uint8_t timeoutEvent(SondeInfo *si);
|
||||||
|
uint8_t updateState(uint8_t event);
|
||||||
|
|
||||||
|
void updateDisplayPos();
|
||||||
|
void updateDisplayPos2();
|
||||||
|
void updateDisplayID();
|
||||||
|
void updateDisplayRSSI();
|
||||||
|
void updateDisplayRXConfig();
|
||||||
|
void updateStat();
|
||||||
|
void updateDisplayIP();
|
||||||
|
void updateDisplay();
|
||||||
|
void clearDisplay();
|
||||||
|
|
||||||
|
void setIP(String ip, bool isAP);
|
||||||
|
};
|
||||||
|
|
||||||
|
extern Sonde sonde;
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
1412
libraries/SondeLib/TFT22_ILI9225.cpp
Executable file
1412
libraries/SondeLib/TFT22_ILI9225.cpp
Executable file
File diff suppressed because it is too large
Load Diff
468
libraries/SondeLib/TFT22_ILI9225.h
Executable file
468
libraries/SondeLib/TFT22_ILI9225.h
Executable file
|
|
@ -0,0 +1,468 @@
|
||||||
|
// SPDX-License-Identifier: GPL-3.0
|
||||||
|
// original source: https://github.com/Nkawu/TFT22_ILI9225
|
||||||
|
|
||||||
|
#ifndef TFT22_ILI9225_h
|
||||||
|
#define TFT22_ILI9225_h
|
||||||
|
|
||||||
|
#ifdef __STM32F1__
|
||||||
|
#define ARDUINO_STM32_FEATHER
|
||||||
|
#define PROGMEM
|
||||||
|
// if 'SPI_CHANNEL' is not defined, 'SPI' is used, only valid for STM32F1
|
||||||
|
//#define SPI_CHANNEL SPI_2
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define USE_STRING_CLASS
|
||||||
|
|
||||||
|
#ifdef USE_STRING_CLASS
|
||||||
|
#define STRING String
|
||||||
|
#else
|
||||||
|
#define STRING const char *
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ARDUINO >= 100
|
||||||
|
#include "Arduino.h"
|
||||||
|
#else
|
||||||
|
#include "WProgram.h"
|
||||||
|
#endif
|
||||||
|
#include <SPI.h>
|
||||||
|
#include "gfxfont.h"
|
||||||
|
|
||||||
|
#if defined(ARDUINO_STM32_FEATHER) || defined(ARDUINO_ARCH_STM32) || defined(ARDUINO_ARCH_STM32F1) || defined(STM32F1)
|
||||||
|
typedef volatile uint32 RwReg;
|
||||||
|
#endif
|
||||||
|
#if defined(ARDUINO_FEATHER52)
|
||||||
|
typedef volatile uint32_t RwReg;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* ILI9225 screen size */
|
||||||
|
#define ILI9225_LCD_WIDTH 176
|
||||||
|
#define ILI9225_LCD_HEIGHT 220
|
||||||
|
|
||||||
|
/* ILI9225 LCD Registers */
|
||||||
|
#define ILI9225_DRIVER_OUTPUT_CTRL (0x01u) // Driver Output Control
|
||||||
|
#define ILI9225_LCD_AC_DRIVING_CTRL (0x02u) // LCD AC Driving Control
|
||||||
|
#define ILI9225_ENTRY_MODE (0x03u) // Entry Mode
|
||||||
|
#define ILI9225_DISP_CTRL1 (0x07u) // Display Control 1
|
||||||
|
#define ILI9225_BLANK_PERIOD_CTRL1 (0x08u) // Blank Period Control
|
||||||
|
#define ILI9225_FRAME_CYCLE_CTRL (0x0Bu) // Frame Cycle Control
|
||||||
|
#define ILI9225_INTERFACE_CTRL (0x0Cu) // Interface Control
|
||||||
|
#define ILI9225_OSC_CTRL (0x0Fu) // Osc Control
|
||||||
|
#define ILI9225_POWER_CTRL1 (0x10u) // Power Control 1
|
||||||
|
#define ILI9225_POWER_CTRL2 (0x11u) // Power Control 2
|
||||||
|
#define ILI9225_POWER_CTRL3 (0x12u) // Power Control 3
|
||||||
|
#define ILI9225_POWER_CTRL4 (0x13u) // Power Control 4
|
||||||
|
#define ILI9225_POWER_CTRL5 (0x14u) // Power Control 5
|
||||||
|
#define ILI9225_VCI_RECYCLING (0x15u) // VCI Recycling
|
||||||
|
#define ILI9225_RAM_ADDR_SET1 (0x20u) // Horizontal GRAM Address Set
|
||||||
|
#define ILI9225_RAM_ADDR_SET2 (0x21u) // Vertical GRAM Address Set
|
||||||
|
#define ILI9225_GRAM_DATA_REG (0x22u) // GRAM Data Register
|
||||||
|
#define ILI9225_GATE_SCAN_CTRL (0x30u) // Gate Scan Control Register
|
||||||
|
#define ILI9225_VERTICAL_SCROLL_CTRL1 (0x31u) // Vertical Scroll Control 1 Register
|
||||||
|
#define ILI9225_VERTICAL_SCROLL_CTRL2 (0x32u) // Vertical Scroll Control 2 Register
|
||||||
|
#define ILI9225_VERTICAL_SCROLL_CTRL3 (0x33u) // Vertical Scroll Control 3 Register
|
||||||
|
#define ILI9225_PARTIAL_DRIVING_POS1 (0x34u) // Partial Driving Position 1 Register
|
||||||
|
#define ILI9225_PARTIAL_DRIVING_POS2 (0x35u) // Partial Driving Position 2 Register
|
||||||
|
#define ILI9225_HORIZONTAL_WINDOW_ADDR1 (0x36u) // Horizontal Address Start Position
|
||||||
|
#define ILI9225_HORIZONTAL_WINDOW_ADDR2 (0x37u) // Horizontal Address End Position
|
||||||
|
#define ILI9225_VERTICAL_WINDOW_ADDR1 (0x38u) // Vertical Address Start Position
|
||||||
|
#define ILI9225_VERTICAL_WINDOW_ADDR2 (0x39u) // Vertical Address End Position
|
||||||
|
#define ILI9225_GAMMA_CTRL1 (0x50u) // Gamma Control 1
|
||||||
|
#define ILI9225_GAMMA_CTRL2 (0x51u) // Gamma Control 2
|
||||||
|
#define ILI9225_GAMMA_CTRL3 (0x52u) // Gamma Control 3
|
||||||
|
#define ILI9225_GAMMA_CTRL4 (0x53u) // Gamma Control 4
|
||||||
|
#define ILI9225_GAMMA_CTRL5 (0x54u) // Gamma Control 5
|
||||||
|
#define ILI9225_GAMMA_CTRL6 (0x55u) // Gamma Control 6
|
||||||
|
#define ILI9225_GAMMA_CTRL7 (0x56u) // Gamma Control 7
|
||||||
|
#define ILI9225_GAMMA_CTRL8 (0x57u) // Gamma Control 8
|
||||||
|
#define ILI9225_GAMMA_CTRL9 (0x58u) // Gamma Control 9
|
||||||
|
#define ILI9225_GAMMA_CTRL10 (0x59u) // Gamma Control 10
|
||||||
|
|
||||||
|
#define ILI9225C_INVOFF 0x20
|
||||||
|
#define ILI9225C_INVON 0x21
|
||||||
|
|
||||||
|
// autoincrement modes (register ILI9225_ENTRY_MODE, bit 5..3 )
|
||||||
|
enum autoIncMode_t { R2L_BottomUp, BottomUp_R2L, L2R_BottomUp, BottomUp_L2R, R2L_TopDown, TopDown_R2L, L2R_TopDown, TopDown_L2R };
|
||||||
|
|
||||||
|
/* RGB 16-bit color table definition (RG565) */
|
||||||
|
#define COLOR_BLACK 0x0000 /* 0, 0, 0 */
|
||||||
|
#define COLOR_WHITE 0xFFFF /* 255, 255, 255 */
|
||||||
|
#define COLOR_BLUE 0x001F /* 0, 0, 255 */
|
||||||
|
#define COLOR_GREEN 0x07E0 /* 0, 255, 0 */
|
||||||
|
#define COLOR_RED 0xF800 /* 255, 0, 0 */
|
||||||
|
#define COLOR_NAVY 0x000F /* 0, 0, 128 */
|
||||||
|
#define COLOR_DARKBLUE 0x0011 /* 0, 0, 139 */
|
||||||
|
#define COLOR_DARKGREEN 0x03E0 /* 0, 128, 0 */
|
||||||
|
#define COLOR_DARKCYAN 0x03EF /* 0, 128, 128 */
|
||||||
|
#define COLOR_CYAN 0x07FF /* 0, 255, 255 */
|
||||||
|
#define COLOR_TURQUOISE 0x471A /* 64, 224, 208 */
|
||||||
|
#define COLOR_INDIGO 0x4810 /* 75, 0, 130 */
|
||||||
|
#define COLOR_DARKRED 0x8000 /* 128, 0, 0 */
|
||||||
|
#define COLOR_OLIVE 0x7BE0 /* 128, 128, 0 */
|
||||||
|
#define COLOR_GRAY 0x8410 /* 128, 128, 128 */
|
||||||
|
#define COLOR_GREY 0x8410 /* 128, 128, 128 */
|
||||||
|
#define COLOR_SKYBLUE 0x867D /* 135, 206, 235 */
|
||||||
|
#define COLOR_BLUEVIOLET 0x895C /* 138, 43, 226 */
|
||||||
|
#define COLOR_LIGHTGREEN 0x9772 /* 144, 238, 144 */
|
||||||
|
#define COLOR_DARKVIOLET 0x901A /* 148, 0, 211 */
|
||||||
|
#define COLOR_YELLOWGREEN 0x9E66 /* 154, 205, 50 */
|
||||||
|
#define COLOR_BROWN 0xA145 /* 165, 42, 42 */
|
||||||
|
#define COLOR_DARKGRAY 0x7BEF /* 128, 128, 128 */
|
||||||
|
#define COLOR_DARKGREY 0x7BEF /* 128, 128, 128 */
|
||||||
|
#define COLOR_SIENNA 0xA285 /* 160, 82, 45 */
|
||||||
|
#define COLOR_LIGHTBLUE 0xAEDC /* 172, 216, 230 */
|
||||||
|
#define COLOR_GREENYELLOW 0xAFE5 /* 173, 255, 47 */
|
||||||
|
#define COLOR_SILVER 0xC618 /* 192, 192, 192 */
|
||||||
|
#define COLOR_LIGHTGRAY 0xC618 /* 192, 192, 192 */
|
||||||
|
#define COLOR_LIGHTGREY 0xC618 /* 192, 192, 192 */
|
||||||
|
#define COLOR_LIGHTCYAN 0xE7FF /* 224, 255, 255 */
|
||||||
|
#define COLOR_VIOLET 0xEC1D /* 238, 130, 238 */
|
||||||
|
#define COLOR_AZUR 0xF7FF /* 240, 255, 255 */
|
||||||
|
#define COLOR_BEIGE 0xF7BB /* 245, 245, 220 */
|
||||||
|
#define COLOR_MAGENTA 0xF81F /* 255, 0, 255 */
|
||||||
|
#define COLOR_TOMATO 0xFB08 /* 255, 99, 71 */
|
||||||
|
#define COLOR_GOLD 0xFEA0 /* 255, 215, 0 */
|
||||||
|
#define COLOR_ORANGE 0xFD20 /* 255, 165, 0 */
|
||||||
|
#define COLOR_SNOW 0xFFDF /* 255, 250, 250 */
|
||||||
|
#define COLOR_YELLOW 0xFFE0 /* 255, 255, 0 */
|
||||||
|
|
||||||
|
|
||||||
|
/* Font defines */
|
||||||
|
#define FONT_HEADER_SIZE 4 // 1: pixel width of 1 font character, 2: pixel height,
|
||||||
|
#define readFontByte(x) pgm_read_byte(&cfont.font[x])
|
||||||
|
|
||||||
|
extern uint8_t Terminal6x8[];
|
||||||
|
extern uint8_t Terminal11x16[];
|
||||||
|
extern uint8_t Terminal12x16[];
|
||||||
|
extern uint8_t Trebuchet_MS16x21[];
|
||||||
|
|
||||||
|
struct _currentFont
|
||||||
|
{
|
||||||
|
uint8_t* font;
|
||||||
|
uint8_t width;
|
||||||
|
uint8_t height;
|
||||||
|
uint8_t offset;
|
||||||
|
uint8_t numchars;
|
||||||
|
uint8_t nbrows;
|
||||||
|
bool monoSp;
|
||||||
|
};
|
||||||
|
#define MONOSPACE 1
|
||||||
|
|
||||||
|
#if defined (ARDUINO_STM32_FEATHER)
|
||||||
|
#undef USE_FAST_PINIO
|
||||||
|
#elif defined (__AVR__) || defined(TEENSYDUINO) || defined(ESP8266) || defined(__arm__)
|
||||||
|
#define USE_FAST_PINIO
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/// Main and core class
|
||||||
|
class TFT22_ILI9225 {
|
||||||
|
|
||||||
|
public:
|
||||||
|
|
||||||
|
TFT22_ILI9225(int8_t RST, int8_t RS, int8_t CS, int8_t SDI, int8_t CLK, int8_t LED);
|
||||||
|
TFT22_ILI9225(int8_t RST, int8_t RS, int8_t CS, int8_t LED);
|
||||||
|
TFT22_ILI9225(int8_t RST, int8_t RS, int8_t CS, int8_t SDI, int8_t CLK, int8_t LED, uint8_t brightness);
|
||||||
|
TFT22_ILI9225(int8_t RST, int8_t RS, int8_t CS, int8_t LED, uint8_t brightness);
|
||||||
|
|
||||||
|
/// Initialization
|
||||||
|
#ifndef ESP32
|
||||||
|
void begin(void);
|
||||||
|
#else
|
||||||
|
void begin(SPIClass &spi=SPI);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/// Clear the screen
|
||||||
|
void clear(void);
|
||||||
|
|
||||||
|
/// Invert screen
|
||||||
|
/// @param flag true to invert, false for normal screen
|
||||||
|
void invert(boolean flag);
|
||||||
|
|
||||||
|
/// Switch backlight on or off
|
||||||
|
/// @param flag true=on, false=off
|
||||||
|
void setBacklight(boolean flag);
|
||||||
|
|
||||||
|
/// Set backlight brightness
|
||||||
|
/// @param brightness sets backlight brightness 0-255
|
||||||
|
void setBacklightBrightness(uint8_t brightness);
|
||||||
|
|
||||||
|
/// Switch display on or off
|
||||||
|
/// @param flag true=on, false=off
|
||||||
|
void setDisplay(boolean flag);
|
||||||
|
|
||||||
|
/// Set orientation
|
||||||
|
/// @param orientation orientation, 0=portrait, 1=right rotated landscape, 2=reverse portrait, 3=left rotated landscape
|
||||||
|
void setOrientation(uint8_t orientation);
|
||||||
|
|
||||||
|
/// Get orientation
|
||||||
|
/// @return orientation orientation, 0=portrait, 1=right rotated landscape, 2=reverse portrait, 3=left rotated landscape
|
||||||
|
uint8_t getOrientation(void);
|
||||||
|
|
||||||
|
/// Font size, x-axis
|
||||||
|
/// @return horizontal size of current font, in pixels
|
||||||
|
// uint8_t fontX(void);
|
||||||
|
|
||||||
|
/// Font size, y-axis
|
||||||
|
/// @return vertical size of current font, in pixels
|
||||||
|
// uint8_t fontY(void);
|
||||||
|
|
||||||
|
/// Screen size, x-axis
|
||||||
|
/// @return horizontal size of the screen, in pixels
|
||||||
|
/// @note 240 means 240 pixels and thus 0..239 coordinates (decimal)
|
||||||
|
uint16_t maxX(void);
|
||||||
|
|
||||||
|
/// Screen size, y-axis
|
||||||
|
/// @return vertical size of the screen, in pixels
|
||||||
|
/// @note 220 means 220 pixels and thus 0..219 coordinates (decimal)
|
||||||
|
uint16_t maxY(void);
|
||||||
|
|
||||||
|
/// Draw circle
|
||||||
|
/// @param x0 center, point coordinate, x-axis
|
||||||
|
/// @param y0 center, point coordinate, y-axis
|
||||||
|
/// @param radius radius
|
||||||
|
/// @param color 16-bit color
|
||||||
|
void drawCircle(uint16_t x0, uint16_t y0, uint16_t radius, uint16_t color);
|
||||||
|
|
||||||
|
/// Draw solid circle
|
||||||
|
/// @param x0 center, point coordinate, x-axis
|
||||||
|
/// @param y0 center, point coordinate, y-axis
|
||||||
|
/// @param radius radius
|
||||||
|
/// @param color 16-bit color
|
||||||
|
void fillCircle(uint8_t x0, uint8_t y0, uint8_t radius, uint16_t color);
|
||||||
|
|
||||||
|
/// Set background color
|
||||||
|
/// @param color background color, default=black
|
||||||
|
void setBackgroundColor(uint16_t color = COLOR_BLACK);
|
||||||
|
|
||||||
|
/// Draw line, rectangle coordinates
|
||||||
|
/// @param x1 start point coordinate, x-axis
|
||||||
|
/// @param y1 start point coordinate, y-axis
|
||||||
|
/// @param x2 end point coordinate, x-axis
|
||||||
|
/// @param y2 end point coordinate, y-axis
|
||||||
|
/// @param color 16-bit color
|
||||||
|
void drawLine(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t color);
|
||||||
|
|
||||||
|
/// Draw rectangle, rectangle coordinates
|
||||||
|
/// @param x1 top left coordinate, x-axis
|
||||||
|
/// @param y1 top left coordinate, y-axis
|
||||||
|
/// @param x2 bottom right coordinate, x-axis
|
||||||
|
/// @param y2 bottom right coordinate, y-axis
|
||||||
|
/// @param color 16-bit color
|
||||||
|
void drawRectangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t color);
|
||||||
|
|
||||||
|
/// Draw solid rectangle, rectangle coordinates
|
||||||
|
/// @param x1 top left coordinate, x-axis
|
||||||
|
/// @param y1 top left coordinate, y-axis
|
||||||
|
/// @param x2 bottom right coordinate, x-axis
|
||||||
|
/// @param y2 bottom right coordinate, y-axis
|
||||||
|
/// @param color 16-bit color
|
||||||
|
void fillRectangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t color);
|
||||||
|
|
||||||
|
/// Draw pixel
|
||||||
|
/// @param x1 point coordinate, x-axis
|
||||||
|
/// @param y1 point coordinate, y-axis
|
||||||
|
/// @param color 16-bit color
|
||||||
|
void drawPixel(uint16_t x1, uint16_t y1, uint16_t color);
|
||||||
|
|
||||||
|
/// Draw ASCII Text (pixel coordinates)
|
||||||
|
/// @param x point coordinate, x-axis
|
||||||
|
/// @param y point coordinate, y-axis
|
||||||
|
/// @param s text string
|
||||||
|
/// @param color 16-bit color, default=white
|
||||||
|
/// @return x-position behind text
|
||||||
|
uint16_t drawText(uint16_t x, uint16_t y, STRING s, uint16_t color = COLOR_WHITE);
|
||||||
|
|
||||||
|
/// width of an ASCII Text (pixel )
|
||||||
|
/// @param s text string
|
||||||
|
uint16_t getTextWidth( STRING s ) ;
|
||||||
|
|
||||||
|
/// Calculate 16-bit color from 8-bit Red-Green-Blue components
|
||||||
|
/// @param red red component, 0x00..0xff
|
||||||
|
/// @param green green component, 0x00..0xff
|
||||||
|
/// @param blue blue component, 0x00..0xff
|
||||||
|
/// @return 16-bit color
|
||||||
|
uint16_t setColor(uint8_t red, uint8_t green, uint8_t blue);
|
||||||
|
|
||||||
|
/// Calculate 8-bit Red-Green-Blue components from 16-bit color
|
||||||
|
/// @param rgb 16-bit color
|
||||||
|
/// @param red red component, 0x00..0xff
|
||||||
|
/// @param green green component, 0x00..0xff
|
||||||
|
/// @param blue blue component, 0x00..0xff
|
||||||
|
void splitColor(uint16_t rgb, uint8_t &red, uint8_t &green, uint8_t &blue);
|
||||||
|
|
||||||
|
/// Draw triangle, triangle coordinates
|
||||||
|
/// @param x1 corner 1 coordinate, x-axis
|
||||||
|
/// @param y1 corner 1 coordinate, y-axis
|
||||||
|
/// @param x2 corner 2 coordinate, x-axis
|
||||||
|
/// @param y2 corner 2 coordinate, y-axis
|
||||||
|
/// @param x3 corner 3 coordinate, x-axis
|
||||||
|
/// @param y3 corner 3 coordinate, y-axis
|
||||||
|
/// @param color 16-bit color
|
||||||
|
void drawTriangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t x3, uint16_t y3, uint16_t color);
|
||||||
|
|
||||||
|
/// Draw solid triangle, triangle coordinates
|
||||||
|
/// @param x1 corner 1 coordinate, x-axis
|
||||||
|
/// @param y1 corner 1 coordinate, y-axis
|
||||||
|
/// @param x2 corner 2 coordinate, x-axis
|
||||||
|
/// @param y2 corner 2 coordinate, y-axis
|
||||||
|
/// @param x3 corner 3 coordinate, x-axis
|
||||||
|
/// @param y3 corner 3 coordinate, y-axis
|
||||||
|
/// @param color 16-bit color
|
||||||
|
void fillTriangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t x3, uint16_t y3, uint16_t color);
|
||||||
|
|
||||||
|
/// Set current font
|
||||||
|
/// @param font Font name
|
||||||
|
void setFont(uint8_t* font, bool monoSp=false ); // default = proportional
|
||||||
|
|
||||||
|
/// Get current font
|
||||||
|
_currentFont getFont();
|
||||||
|
|
||||||
|
/// Draw single character (pixel coordinates)
|
||||||
|
/// @param x point coordinate, x-axis
|
||||||
|
/// @param y point coordinate, y-axis
|
||||||
|
/// @param ch ASCII character
|
||||||
|
/// @param color 16-bit color, default=white
|
||||||
|
/// @return width of character in display pixels
|
||||||
|
uint16_t drawChar(uint16_t x, uint16_t y, uint16_t ch, uint16_t color = COLOR_WHITE);
|
||||||
|
|
||||||
|
/// width of an ASCII character (pixel )
|
||||||
|
/// @param ch ASCII character
|
||||||
|
uint16_t getCharWidth( uint16_t ch ) ;
|
||||||
|
|
||||||
|
/// Draw bitmap
|
||||||
|
/// @param x point coordinate, x-axis
|
||||||
|
/// @param y point coordinate, y-axis
|
||||||
|
/// @param bitmap
|
||||||
|
/// @param w width
|
||||||
|
/// @param h height
|
||||||
|
/// @param color 16-bit color, default=white
|
||||||
|
/// @param bg 16-bit color, background
|
||||||
|
void drawBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, uint16_t color);
|
||||||
|
void drawBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, uint16_t color, uint16_t bg);
|
||||||
|
void drawBitmap(int16_t x, int16_t y, uint8_t *bitmap, int16_t w, int16_t h, uint16_t color);
|
||||||
|
void drawBitmap(int16_t x, int16_t y, uint8_t *bitmap, int16_t w, int16_t h, uint16_t color, uint16_t bg);
|
||||||
|
|
||||||
|
void drawXBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, uint16_t color);
|
||||||
|
void drawXBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, uint16_t color, uint16_t bg);
|
||||||
|
|
||||||
|
/// Draw bitmap
|
||||||
|
/// @param x point coordinate, x-axis
|
||||||
|
/// @param y point coordinate, y-axis
|
||||||
|
/// @param bitmap, 2D 16bit color bitmap
|
||||||
|
/// @param w width
|
||||||
|
/// @param h height
|
||||||
|
void drawBitmap(uint16_t x, uint16_t y, const uint16_t** bitmap, int16_t w, int16_t h);
|
||||||
|
void drawBitmap(uint16_t x, uint16_t y, uint16_t** bitmap, int16_t w, int16_t h);
|
||||||
|
|
||||||
|
/// Draw bitmap
|
||||||
|
/// @param x point coordinate, x-axis
|
||||||
|
/// @param y point coordinate, y-axis
|
||||||
|
/// @param bitmap, 1D 16bit color bitmap
|
||||||
|
/// @param w width
|
||||||
|
/// @param h height
|
||||||
|
void drawBitmap(uint16_t x, uint16_t y, const uint16_t* bitmap, int16_t w, int16_t h);
|
||||||
|
void drawBitmap(uint16_t x, uint16_t y, uint16_t* bitmap, int16_t w, int16_t h);
|
||||||
|
|
||||||
|
/// Set current GFX font
|
||||||
|
/// @param f GFX font name defined in include file
|
||||||
|
void setGFXFont(const GFXfont *f = NULL);
|
||||||
|
|
||||||
|
/// Draw a string with the current GFX font
|
||||||
|
/// @param x point coordinate, x-axis
|
||||||
|
/// @param y point coordinate, y-axis
|
||||||
|
/// @param s string to print
|
||||||
|
/// @param color 16-bit color
|
||||||
|
void drawGFXText(int16_t x, int16_t y, STRING s, uint16_t color);
|
||||||
|
|
||||||
|
/// Get the width & height of a text string with the current GFX font
|
||||||
|
/// @param str string to analyze
|
||||||
|
/// @param x point coordinate, x-axis
|
||||||
|
/// @param y point coordinate, y-axis
|
||||||
|
/// @param w width in pixels of string
|
||||||
|
/// @param h height in pixels of string
|
||||||
|
void getGFXTextExtent(STRING str, int16_t x, int16_t y, int16_t *w, int16_t *h);
|
||||||
|
|
||||||
|
/// Draw a single character with the current GFX font
|
||||||
|
/// @param x point coordinate, x-axis
|
||||||
|
/// @param y point coordinate, y-axis
|
||||||
|
/// @param c character to draw
|
||||||
|
/// @param color 16-bit color
|
||||||
|
/// @return width of character in display pixels
|
||||||
|
uint16_t drawGFXChar(int16_t x, int16_t y, unsigned char c, uint16_t color);
|
||||||
|
|
||||||
|
uint16_t drawGFXcharBM(int16_t x, int16_t y, unsigned char c, uint16_t color, uint16_t *bm, int bmwd);
|
||||||
|
|
||||||
|
void getGFXCharExtent(uint8_t c, int16_t *gw, int16_t *gh, int16_t *xa);
|
||||||
|
|
||||||
|
private:
|
||||||
|
|
||||||
|
void _spiWrite(uint8_t v);
|
||||||
|
void _spiWrite16(uint16_t v);
|
||||||
|
void _spiWriteCommand(uint8_t c);
|
||||||
|
void _spiWriteData(uint8_t d);
|
||||||
|
|
||||||
|
void _swap(uint16_t &a, uint16_t &b);
|
||||||
|
void _setWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1);
|
||||||
|
void _setWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, autoIncMode_t mode);
|
||||||
|
void _resetWindow();
|
||||||
|
void _drawBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h,
|
||||||
|
uint16_t color, uint16_t bg, bool transparent, bool progmem, bool Xbit );
|
||||||
|
void _orientCoordinates(uint16_t &x1, uint16_t &y1);
|
||||||
|
void _writeRegister(uint16_t reg, uint16_t data);
|
||||||
|
void _writeData(uint8_t HI, uint8_t LO);
|
||||||
|
void _writeData16(uint16_t HILO);
|
||||||
|
void _writeCommand(uint8_t HI, uint8_t LO);
|
||||||
|
void _writeCommand16(uint16_t HILO);
|
||||||
|
uint16_t _maxX, _maxY, _bgColor;
|
||||||
|
|
||||||
|
#if defined (__AVR__) || defined(TEENSYDUINO)
|
||||||
|
int8_t _rst, _rs, _cs, _sdi, _clk, _led;
|
||||||
|
#ifdef USE_FAST_PINIO
|
||||||
|
volatile uint8_t *mosiport, *clkport, *dcport, *rsport, *csport;
|
||||||
|
uint8_t mosipinmask, clkpinmask, cspinmask, dcpinmask;
|
||||||
|
#endif
|
||||||
|
#elif defined (__arm__)
|
||||||
|
int32_t _rst, _rs, _cs, _sdi, _clk, _led;
|
||||||
|
#ifdef USE_FAST_PINIO
|
||||||
|
volatile RwReg *mosiport, *clkport, *dcport, *rsport, *csport;
|
||||||
|
uint32_t mosipinmask, clkpinmask, cspinmask, dcpinmask;
|
||||||
|
#endif
|
||||||
|
#elif defined (ESP8266) || defined (ESP32)
|
||||||
|
int8_t _rst, _rs, _cs, _sdi, _clk, _led;
|
||||||
|
#ifdef USE_FAST_PINIO
|
||||||
|
volatile uint32_t *mosiport, *clkport, *dcport, *rsport, *csport;
|
||||||
|
uint32_t mosipinmask, clkpinmask, cspinmask, dcpinmask;
|
||||||
|
#endif
|
||||||
|
#else
|
||||||
|
int8_t _rst, _rs, _cs, _sdi, _clk, _led;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
uint8_t _orientation, _brightness;
|
||||||
|
|
||||||
|
// correspondig modes if orientation changed:
|
||||||
|
const autoIncMode_t modeTab [3][8] = {
|
||||||
|
// { R2L_BottomUp, BottomUp_R2L, L2R_BottomUp, BottomUp_L2R, R2L_TopDown, TopDown_R2L, L2R_TopDown, TopDown_L2R }//
|
||||||
|
/* 90° */ { BottomUp_L2R, L2R_BottomUp, TopDown_L2R, L2R_TopDown, BottomUp_R2L, R2L_BottomUp, TopDown_R2L, R2L_TopDown },
|
||||||
|
/*180° */ { L2R_TopDown , TopDown_L2R, R2L_TopDown, TopDown_R2L, L2R_BottomUp, BottomUp_L2R, R2L_BottomUp, BottomUp_R2L},
|
||||||
|
/*270° */ { TopDown_R2L , R2L_TopDown, BottomUp_R2L, R2L_BottomUp, TopDown_L2R, L2R_TopDown, BottomUp_L2R, L2R_BottomUp}
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
bool hwSPI, blState;
|
||||||
|
|
||||||
|
_currentFont cfont;
|
||||||
|
|
||||||
|
#ifdef ESP32
|
||||||
|
SPIClass _spi;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
protected:
|
||||||
|
|
||||||
|
uint32_t writeFunctionLevel;
|
||||||
|
void startWrite(void);
|
||||||
|
void endWrite(void);
|
||||||
|
|
||||||
|
|
||||||
|
GFXfont *gfxFont;
|
||||||
|
};
|
||||||
|
|
||||||
|
#endif
|
||||||
350
libraries/SondeLib/aprs.cpp
Executable file
350
libraries/SondeLib/aprs.cpp
Executable file
|
|
@ -0,0 +1,350 @@
|
||||||
|
/* Copyright (C) Hansi Reiser, dl9rdz
|
||||||
|
*
|
||||||
|
* partially based on dxlAPRS toolchain
|
||||||
|
*
|
||||||
|
* Copyright (C) Christian Rabler <oe5dxl@oevsv.at>
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <stdio.h>
|
||||||
|
#include <WString.h>
|
||||||
|
#include <stdlib.h>
|
||||||
|
//#include <arpa/inet.h>
|
||||||
|
//#include <sys/socket.h>
|
||||||
|
#include <math.h>
|
||||||
|
#include <unistd.h>
|
||||||
|
#include <inttypes.h>
|
||||||
|
#include "aprs.h"
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
int openudp(const char *ip, int port, struct sockaddr_in *si) {
|
||||||
|
int fd;
|
||||||
|
if((fd=socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP))==-1) return -1;
|
||||||
|
memset((char *)&si, 0, sizeof(si));
|
||||||
|
si->sin_family = AF_INET;
|
||||||
|
si->sin_port = htons(port);
|
||||||
|
if(inet_aton(ip, &(si->sin_addr))==0) {
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
return fd;
|
||||||
|
}
|
||||||
|
|
||||||
|
int sendudp(int fd, struct sockaddr_in *si, char *frame, int framelen)
|
||||||
|
{
|
||||||
|
if(sendto(fd, frame, framelen, 0, (struct sockaddr *)si, sizeof(struct sockaddr_in))==-1) {
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
void aprsstr_append(char *b, const char *data)
|
||||||
|
{
|
||||||
|
int blen=strlen(b);
|
||||||
|
int len=strlen(data);
|
||||||
|
if(blen+len>APRS_MAXLEN) len=APRS_MAXLEN-blen;
|
||||||
|
strncat(b, data, len);
|
||||||
|
}
|
||||||
|
|
||||||
|
uint32_t realcard(float x) {
|
||||||
|
if(x<0) return 0;
|
||||||
|
else return (uint32_t)x;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
/* CRC for AXUDP frames */
|
||||||
|
|
||||||
|
#define APRSCRC_POLY 0x8408
|
||||||
|
static uint8_t CRCL[256];
|
||||||
|
static uint8_t CRCH[256];
|
||||||
|
|
||||||
|
void aprs_gencrctab(void)
|
||||||
|
{
|
||||||
|
uint32_t c;
|
||||||
|
uint32_t crc;
|
||||||
|
uint32_t i;
|
||||||
|
for (c = 0UL; c<=255UL; c++) {
|
||||||
|
crc = 255UL-c;
|
||||||
|
for (i = 0UL; i<=7UL; i++) {
|
||||||
|
if ((crc&1)) crc = (uint32_t)((uint32_t)(crc>>1)^APRSCRC_POLY);
|
||||||
|
else crc = crc>>1;
|
||||||
|
} /* end for */
|
||||||
|
CRCL[c] = (uint8_t)crc;
|
||||||
|
CRCH[c] = (uint8_t)(255UL-(crc>>8));
|
||||||
|
} /* end for */
|
||||||
|
} /* end Gencrctab() */
|
||||||
|
|
||||||
|
static void aprsstr_appcrc(char frame[], uint32_t frame_len, int32_t size)
|
||||||
|
{
|
||||||
|
uint8_t h;
|
||||||
|
uint8_t l;
|
||||||
|
uint8_t b;
|
||||||
|
int32_t i;
|
||||||
|
int32_t tmp;
|
||||||
|
l = 0U;
|
||||||
|
h = 0U;
|
||||||
|
tmp = size-1L;
|
||||||
|
i = 0L;
|
||||||
|
if (i<=tmp) for (;; i++) {
|
||||||
|
b = (uint8_t)((uint8_t)(uint8_t)frame[i]^l);
|
||||||
|
l = CRCL[b]^h;
|
||||||
|
h = CRCH[b];
|
||||||
|
if (i==tmp) break;
|
||||||
|
} /* end for */
|
||||||
|
frame[size] = (char)l;
|
||||||
|
frame[size+1L] = (char)h;
|
||||||
|
} /* end aprsstr_appcrc() */
|
||||||
|
|
||||||
|
|
||||||
|
static int mkaprscall(int32_t * p, char raw[],
|
||||||
|
uint32_t * i, const char mon[],
|
||||||
|
char sep1, char sep2, char sep3,
|
||||||
|
uint32_t sbase)
|
||||||
|
{
|
||||||
|
uint32_t s;
|
||||||
|
uint32_t l;
|
||||||
|
l = 0UL;
|
||||||
|
while ((((mon[*i] && mon[*i]!=sep1) && mon[*i]!=sep2) && mon[*i]!=sep3)
|
||||||
|
&& mon[*i]!='-') {
|
||||||
|
s = (uint32_t)(uint8_t)mon[*i]*2UL&255UL;
|
||||||
|
if (s<=64UL) return 0;
|
||||||
|
raw[*p] = (char)s;
|
||||||
|
++*p;
|
||||||
|
++*i;
|
||||||
|
++l;
|
||||||
|
if (l>=7UL) return 0;
|
||||||
|
}
|
||||||
|
while (l<6UL) {
|
||||||
|
raw[*p] = '@';
|
||||||
|
++*p;
|
||||||
|
++l;
|
||||||
|
}
|
||||||
|
s = 0UL;
|
||||||
|
if (mon[*i]=='-') {
|
||||||
|
++*i;
|
||||||
|
while ((uint8_t)mon[*i]>='0' && (uint8_t)mon[*i]<='9') {
|
||||||
|
s = (s*10UL+(uint32_t)(uint8_t)mon[*i])-48UL;
|
||||||
|
++*i;
|
||||||
|
}
|
||||||
|
if (s>15UL) return 0;
|
||||||
|
}
|
||||||
|
raw[*p] = (char)((s+sbase)*2UL);
|
||||||
|
++*p;
|
||||||
|
return 1;
|
||||||
|
} /* end call() */
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// returns raw len, 0 in case of error
|
||||||
|
extern int aprsstr_mon2raw(const char *mon, char raw[], int raw_len)
|
||||||
|
{
|
||||||
|
uint32_t r;
|
||||||
|
uint32_t n;
|
||||||
|
uint32_t i;
|
||||||
|
uint32_t tmp;
|
||||||
|
int p = 7L;
|
||||||
|
i = 0UL;
|
||||||
|
fprintf(stderr,"mon2raw for %s\n", mon);
|
||||||
|
if (!mkaprscall(&p, raw, &i, mon, '>', 0, 0, 48UL)) {
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
p = 0L;
|
||||||
|
if (mon[i]!='>') return 0;
|
||||||
|
/* ">" */
|
||||||
|
++i;
|
||||||
|
if (!mkaprscall(&p, raw, &i, mon, ':', ',', 0, 112UL)) {
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
p = 14L;
|
||||||
|
n = 0UL;
|
||||||
|
while (mon[i]==',') {
|
||||||
|
++i;
|
||||||
|
if (!mkaprscall(&p, raw, &i, mon, ':', ',', '*', 48UL)) {
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
++n;
|
||||||
|
if (n>8UL) {
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
if (mon[i]=='*') {
|
||||||
|
/* "*" has repeatet sign */
|
||||||
|
++i;
|
||||||
|
r = (uint32_t)p;
|
||||||
|
if (r>=21UL) for (tmp = (uint32_t)(r-21UL)/7UL;;) {
|
||||||
|
raw[r-1UL] = (char)((uint32_t)(uint8_t)raw[r-1UL]+128UL);
|
||||||
|
/* set "has repeated" flags */
|
||||||
|
if (!tmp) break;
|
||||||
|
--tmp;
|
||||||
|
r -= 7UL;
|
||||||
|
} /* end for */
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (p==0L || mon[i]!=':') {
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
raw[p-1L] = (char)((uint32_t)(uint8_t)raw[p-1L]+1UL);
|
||||||
|
/* end address field mark */
|
||||||
|
raw[p] = '\003';
|
||||||
|
++p;
|
||||||
|
raw[p] = '\360';
|
||||||
|
++p;
|
||||||
|
++i;
|
||||||
|
n = 256UL;
|
||||||
|
while (mon[i]) {
|
||||||
|
/* copy info part */
|
||||||
|
if (p>=(int32_t)(raw_len-1)-2L || n==0UL) {
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
raw[p] = mon[i];
|
||||||
|
++p;
|
||||||
|
++i;
|
||||||
|
--n;
|
||||||
|
}
|
||||||
|
aprsstr_appcrc(raw, raw_len, p);
|
||||||
|
fprintf(stderr,"results in %s\n",raw);
|
||||||
|
return p+2;
|
||||||
|
} /* end mon2raw() */
|
||||||
|
|
||||||
|
extern int aprsstr_mon2kiss(const char *mon, char raw[], int raw_len)
|
||||||
|
{
|
||||||
|
char tmp[201];
|
||||||
|
int len = aprsstr_mon2raw(mon, tmp, 201);
|
||||||
|
if(len==0) return 0;
|
||||||
|
int idx=0;
|
||||||
|
raw[idx++] = '\xC0';
|
||||||
|
for(int i=0; i<len-2; i++) { // -2: discard CRC, not used in KISS
|
||||||
|
if(tmp[i]=='\xC0') {
|
||||||
|
raw[idx++] = '\xDB';
|
||||||
|
raw[idx++] = '\xDC';
|
||||||
|
} else if (tmp[i]=='\xDB') {
|
||||||
|
raw[idx++] = '\xDB';
|
||||||
|
raw[idx++] = '\xDD';
|
||||||
|
} else {
|
||||||
|
raw[idx++] = tmp[i];
|
||||||
|
}
|
||||||
|
if(idx>=raw_len)
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
return idx;
|
||||||
|
}
|
||||||
|
|
||||||
|
#define FEET (1.0/0.3048)
|
||||||
|
#define KNOTS (1.851984)
|
||||||
|
|
||||||
|
#define X2C_max_longcard 0xFFFFFFFFUL
|
||||||
|
static uint32_t X2C_TRUNCC(double x, uint32_t min0, uint32_t max0)
|
||||||
|
{
|
||||||
|
uint32_t i;
|
||||||
|
|
||||||
|
if (x < (double)min0)
|
||||||
|
i = (uint32_t)min0;
|
||||||
|
if (x > (double)max0)
|
||||||
|
i = (uint32_t)max0;
|
||||||
|
|
||||||
|
i = (uint32_t)x;
|
||||||
|
if ((double)i > x)
|
||||||
|
--i;
|
||||||
|
return i;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
static uint32_t truncc(double r)
|
||||||
|
{
|
||||||
|
if (r<=0.0) return 0UL;
|
||||||
|
else if (r>=2.E+9) return 2000000000UL;
|
||||||
|
else return (uint32_t)X2C_TRUNCC(r,0UL,X2C_max_longcard);
|
||||||
|
return 0;
|
||||||
|
} /* end truncc() */
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
static uint32_t dao91(double x)
|
||||||
|
/* radix91(xx/1.1) of dddmm.mmxx */
|
||||||
|
{
|
||||||
|
double a;
|
||||||
|
a = fabs(x);
|
||||||
|
return ((truncc((a-(double)(float)truncc(a))*6.E+5)%100UL)
|
||||||
|
*20UL+11UL)/22UL;
|
||||||
|
} /* end dao91() */
|
||||||
|
|
||||||
|
|
||||||
|
char b[201];
|
||||||
|
char raw[201];
|
||||||
|
|
||||||
|
char *aprs_senddata(SondeInfo *s, const char *usercall, const char *sym) {
|
||||||
|
// float lat, float lon, float alt, float speed, float dir, float climb, const char *type, const char *objname, const char *usercall, const char *sym, const char *comm)
|
||||||
|
*b=0;
|
||||||
|
aprsstr_append(b, usercall);
|
||||||
|
aprsstr_append(b, ">");
|
||||||
|
const char *destcall="APZRDZ";
|
||||||
|
aprsstr_append(b, destcall);
|
||||||
|
// uncompressed
|
||||||
|
aprsstr_append(b, ":;");
|
||||||
|
char tmp[10];
|
||||||
|
snprintf(tmp,10,"%s ",s->id);
|
||||||
|
aprsstr_append(b, tmp);
|
||||||
|
aprsstr_append(b, "*");
|
||||||
|
// time
|
||||||
|
int i = strlen(b);
|
||||||
|
int sec = s->time % 86400;
|
||||||
|
snprintf(b+i, APRS_MAXLEN-1, "%02d%02d%02dz", sec/(60*60), (sec%(60*60))/60, sec%60);
|
||||||
|
i = strlen(b);
|
||||||
|
//aprsstr_append_data(time, ds);
|
||||||
|
int lati = abs((int)s->lat);
|
||||||
|
int latm = (fabs(s->lat)-lati)*6000;
|
||||||
|
snprintf(b+i, APRS_MAXLEN-i, "%02d%02d.%02d%c%c", lati, latm/100, latm%100, s->lat<0?'S':'N', sym[0]);
|
||||||
|
i = strlen(b);
|
||||||
|
int loni = abs((int)s->lon);
|
||||||
|
int lonm = (fabs(s->lon)-loni)*6000;
|
||||||
|
snprintf(b+i, APRS_MAXLEN-i, "%03d%02d.%02d%c%c", loni, lonm/100, lonm%100, s->lon<0?'W':'E', sym[1]);
|
||||||
|
if(s->hs>0.5) {
|
||||||
|
i=strlen(b);
|
||||||
|
snprintf(b+i, APRS_MAXLEN-i, "%03d/%03d", realcard(s->dir+1.5), realcard(s->hs*1.0/KNOTS+0.5));
|
||||||
|
}
|
||||||
|
if(s->alt>0.5) {
|
||||||
|
i=strlen(b);
|
||||||
|
snprintf(b+i, APRS_MAXLEN-i, "/A=%06d", realcard(s->alt*FEET+0.5));
|
||||||
|
}
|
||||||
|
int dao=1;
|
||||||
|
if(dao) {
|
||||||
|
i=strlen(b);
|
||||||
|
snprintf(b+i, APRS_MAXLEN-i, "!w%c%c!", 33+dao91(s->lat), 33+dao91(s->lon));
|
||||||
|
}
|
||||||
|
strcat(b, "&");
|
||||||
|
char comm[100];
|
||||||
|
snprintf(comm, 100, "Clb=%.1fm/s %.3fMHz Type=%s", s->vs, s->freq, sondeTypeStr[s->type]);
|
||||||
|
strcat(b, comm);
|
||||||
|
if(s->type==STYPE_M10||s->type==STYPE_DFM06||s->type==STYPE_DFM09) {
|
||||||
|
snprintf(comm, 100, " ser=%s", s->ser);
|
||||||
|
strcat(b, comm);
|
||||||
|
}
|
||||||
|
return b;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
#if 0
|
||||||
|
int main(int argc, char *argv[])
|
||||||
|
{
|
||||||
|
Gencrctab();
|
||||||
|
|
||||||
|
struct sockaddr_in si;
|
||||||
|
int fd = openudp("127.0.0.1",9002,&si);
|
||||||
|
if(fd<0) { fprintf(stderr,"open failed\n"); return 1; }
|
||||||
|
|
||||||
|
float lat=48, lon=10;
|
||||||
|
while(1) {
|
||||||
|
const char *str = aprs_senddata(lat, lon, 543, 5, 180, 1.5, "RS41", "TE0ST", "TE1ST", "EO");
|
||||||
|
int rawlen = aprsstr_mon2raw(str, raw, APRS_MAXLEN);
|
||||||
|
sendudp(fd, raw, rawlen);
|
||||||
|
|
||||||
|
str = "OE3XKC>APMI06,qAR,OE3XLR:;ER-341109*111111z4803.61NE01532.39E0145.650MHz R15k OE3XPA";
|
||||||
|
rawlen = aprsstr_mon2raw(str, raw, APRS_MAXLEN);
|
||||||
|
sendudp(fd, &si, raw, rawlen);
|
||||||
|
lat += 0.002; lon += 0.01;
|
||||||
|
sleep(5);
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#endif
|
||||||
14
libraries/SondeLib/aprs.h
Executable file
14
libraries/SondeLib/aprs.h
Executable file
|
|
@ -0,0 +1,14 @@
|
||||||
|
|
||||||
|
#ifndef _aprs_h
|
||||||
|
#define _aprs_h
|
||||||
|
#include "Sonde.h"
|
||||||
|
|
||||||
|
|
||||||
|
#define APRS_MAXLEN 201
|
||||||
|
void aprs_gencrctab(void);
|
||||||
|
int aprsstr_mon2raw(const char *mon, char raw[], int raw_len);
|
||||||
|
int aprsstr_mon2kiss(const char *mon, char raw[], int raw_len);
|
||||||
|
char *aprs_senddata(SondeInfo *s, const char *usercall, const char *sym);
|
||||||
|
|
||||||
|
|
||||||
|
#endif
|
||||||
68
libraries/SondeLib/autodetect-infos
Executable file
68
libraries/SondeLib/autodetect-infos
Executable file
|
|
@ -0,0 +1,68 @@
|
||||||
|
Heltec board v1 => fingerprint 0000100 => 4
|
||||||
|
(sda,scl: 4,15) (same as LORA v1.0)
|
||||||
|
0:1 1:0 2:0 3:1 4:0 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:0 13:0 14:1 15:0 16:0 17:0 18:0 19:0 20:0 21:1 22:0 23:0 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0
|
||||||
|
|
||||||
|
Heltec board v2
|
||||||
|
(sda,scl: 4,15) (similar to v1.0, but GPIO21 switches 3V3) => fingerprint 4
|
||||||
|
0:1 1:0 2:0 3:1 4:0 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:0 13:0 14:1 15:0 16:0 17:0 18:0 19:0 20:0 21:1 22:0 23:0 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0
|
||||||
|
0:1 1:1 2:0 3:1 4:0 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:0 13:0 14:1 15:0 16:0 17:0 18:0 19:0 20:0 21:1 22:0 23:0 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0 (before setup
|
||||||
|
|
||||||
|
TTGO LORA32 v2.1_1.6 (button1: touch gpio 2 => 130; button2: touch gpio14 => 142) fingerprint 0011111 => 31
|
||||||
|
(sda,scl: 21,22)
|
||||||
|
0:1 1:0 2:0 3:1 4:0 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:0 13:0 14:1 15:1 16:1 17:1 18:0 19:0 20:0 21:1 22:1 23:1 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0
|
||||||
|
0:4 1:4 2:0 3:4 4:0 5:4 6:0 7:4 8:0 9:4 10:4 11:4 12:0 13:0 14:4 15:4 16:4 17:4 18:0 19:0 20:0 21:4 22:4 23:4 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0 (in Sonde())
|
||||||
|
|
||||||
|
TTGO LORA v1.0 => fingerprint 1000000 => 64
|
||||||
|
(sda,scl: 4,15) (button1: 0) (button2: touch gpio13 = 141)
|
||||||
|
0:1 1:0 2:0 3:1 4:1 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:0 13:0 14:1 15:1 16:0 17:0 18:0 19:0 20:0 21:0 22:0 23:0 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0
|
||||||
|
0:4 1:4 2:0 3:4 4:4 5:4 6:0 7:4 8:0 9:4 10:4 11:4 12:0 13:0 14:4 15:4 16:0 17:0 18:0 19:0 20:0 21:0 22:0 23:0 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0 (in Sonde())
|
||||||
|
|
||||||
|
TTGO T-Beam => fingerprint 0110111 => 55
|
||||||
|
(sda,scl: 21,22) (button1: 39) (button2: touch gpio13 = 141) (gps rx: 12)
|
||||||
|
0:1 1:0 2:0 3:1 4:0 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:1 13:0 14:1 15:1 16:1 17:0 18:0 19:0 20:0 21:1 22:1 23:1 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0
|
||||||
|
0:4 1:4 2:0 3:4 4:0 5:4 6:0 7:4 8:0 9:4 10:4 11:4 12:4 13:0 14:4 15:4 16:4 17:0 18:0 19:0 20:0 21:4 22:4 23:4 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0 (before setup)
|
||||||
|
|
||||||
|
TTGO T-Beam with extern 2" ILI9225 Display => fingerprint 0110000 => 48
|
||||||
|
0:1 1:0 2:0 3:1 4:0 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:1 13:0 14:1 15:1 16:1 17:0 18:0 19:0 20:0 21:0 22:0 23:1 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0
|
||||||
|
0:4 1:4 2:0 3:4 4:0 5:4 6:0 7:4 8:0 9:4 10:4 11:4 12:4 13:0 14:4 15:4 16:4 17:0 18:0 19:0 20:0 21:0 22:0 23:4 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0 (before setup)
|
||||||
|
|
||||||
|
TTGO T-Beam 1.0 with OLED display => fingerprint 0010111 => 23
|
||||||
|
0:1 1:0 2:0 3:1 4:0 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:0 13:0 14:1 15:1 16:1 17:0 18:0 19:0 20:0 21:1 22:1 23:1 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0
|
||||||
|
0:4 1:4 2:0 3:4 4:0 5:4 6:0 7:4 8:0 9:4 10:4 11:4 12:0 13:0 14:4 15:4 16:4 17:0 18:0 19:0 20:0 21:4 22:4 23:4 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0 (before setup)
|
||||||
|
|
||||||
|
1
|
||||||
|
|
||||||
|
Fingerprint GPIOs: 4, 12, 16, 17, 21, 22, 23,
|
||||||
|
|
||||||
|
Current autodetect strategy:
|
||||||
|
RST always set to 16
|
||||||
|
|
||||||
|
GPIO16=0 (GPio22,23 would also work):
|
||||||
|
==Heltec or TTGO LORA v1.0==
|
||||||
|
SDA,SCL set to (4,15)
|
||||||
|
Button 1 set to GPIO 0
|
||||||
|
Button 2 set to Touch in GPIO 13 (141)
|
||||||
|
|
||||||
|
|
||||||
|
otherwise
|
||||||
|
==LORA32 v2.1 or T-Beam==
|
||||||
|
GPIO17=0:
|
||||||
|
== T-BEAM =
|
||||||
|
GPIO12==0: v1 (or check PMU via I2C?)
|
||||||
|
GPS RX set to 34
|
||||||
|
Button 1 set to GPIO28
|
||||||
|
BUtton 2 set to Touch GPIO13
|
||||||
|
else:
|
||||||
|
GPS RX set to 12
|
||||||
|
Button 1 set to GPIO39
|
||||||
|
Button 2 set to Touch GPIO13 (141)
|
||||||
|
GPIO21=0:
|
||||||
|
large display connected (use ILI9225 contig: SDA4 CLK21 RS2 RST22 CS0)
|
||||||
|
else:
|
||||||
|
small display connected, set SDA,SCL to (21,22)
|
||||||
|
otherweise:
|
||||||
|
SDA,SCL set to (21,22)
|
||||||
|
GPS disabled
|
||||||
|
Button 1 set to Touch GPIO2 (130)
|
||||||
|
Button 2 set to Touch GPIO14 (142)
|
||||||
|
|
||||||
226
libraries/SondeLib/geteph.cpp
Executable file
226
libraries/SondeLib/geteph.cpp
Executable file
|
|
@ -0,0 +1,226 @@
|
||||||
|
#include "time.h"
|
||||||
|
#include "geteph.h"
|
||||||
|
#include <SPIFFS.h>
|
||||||
|
#include <WiFi.h>
|
||||||
|
#include <rom/miniz.h>
|
||||||
|
#include <inttypes.h>
|
||||||
|
#include <WiFi.h>
|
||||||
|
#include "Display.h"
|
||||||
|
|
||||||
|
|
||||||
|
extern WiFiClient client;
|
||||||
|
|
||||||
|
static const char *ftpserver = "www.ngs.noaa.gov";
|
||||||
|
char outbuf[128];
|
||||||
|
|
||||||
|
uint8_t getreply() {
|
||||||
|
String s = client.readStringUntil('\n');
|
||||||
|
Serial.println(s);
|
||||||
|
const char *str = s.c_str();
|
||||||
|
if(strlen(str)<4) return 255; // something unusual...
|
||||||
|
if(str[3]=='-') { // multi-line resonse...
|
||||||
|
String s2;
|
||||||
|
const char *str2;
|
||||||
|
do {
|
||||||
|
s2 = client.readStringUntil('\n');
|
||||||
|
Serial.println(s2);
|
||||||
|
str2 = s2.c_str();
|
||||||
|
if(strlen(str2)<4) return 255; // something is wrong
|
||||||
|
} while( str[0]!=str2[0] || str[1]!=str2[1] || str[2]!=str2[2] || str2[3]!=' ' );
|
||||||
|
}
|
||||||
|
return str[0];
|
||||||
|
}
|
||||||
|
|
||||||
|
void writeFully(File &file, uint8_t *buf, size_t len)
|
||||||
|
{
|
||||||
|
size_t olen;
|
||||||
|
|
||||||
|
while(len) {
|
||||||
|
olen = file.write(buf, len);
|
||||||
|
Serial.printf("written: %d of %d\n", olen, len);
|
||||||
|
len -= olen;
|
||||||
|
buf += olen;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void geteph() {
|
||||||
|
// Set current time via network...
|
||||||
|
struct tm tinfo;
|
||||||
|
configTime(0, 0, "pool.ntp.org");
|
||||||
|
bool ok = getLocalTime(&tinfo, 2000); // wait max 2 seconds to get current time via ntp
|
||||||
|
if(!ok) {
|
||||||
|
Serial.println("Failed to get current date/time");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
// Check time of last update
|
||||||
|
int year = tinfo.tm_year + 1900;
|
||||||
|
int day = tinfo.tm_yday + 1;
|
||||||
|
Serial.printf("year %d, day %d\n", year, day);
|
||||||
|
char nowstr[20];
|
||||||
|
snprintf(nowstr, 20, "%04d%03d%02d", year, day, tinfo.tm_hour);
|
||||||
|
File status = SPIFFS.open("/brdc.time", "r");
|
||||||
|
if(status) {
|
||||||
|
String ts = status.readStringUntil('\n');
|
||||||
|
const char *tsstr = ts.c_str();
|
||||||
|
if(tsstr && strlen(tsstr)>=9) {
|
||||||
|
if(strcmp(nowstr, ts.c_str())<=0) {
|
||||||
|
Serial.println("local brdc is up to date\n");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
Serial.printf("now: %s, existing: %s => updating\n", nowstr, tsstr);
|
||||||
|
}
|
||||||
|
status.close();
|
||||||
|
disp.rdis->clear();
|
||||||
|
disp.rdis->setFont(FONT_SMALL);
|
||||||
|
disp.rdis->drawString(0, 0, "FTP ngs.noaa.gov");
|
||||||
|
// fetch rinex from server
|
||||||
|
File fh = SPIFFS.open("/brdc.gz","w");
|
||||||
|
if(!fh) {
|
||||||
|
Serial.println("cannot open file\n");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
char buf[252];
|
||||||
|
snprintf(buf, 128, "/cors/rinex/%04d/%03d/brdc%03d0.%02dn.gz", year, day, day, year-2000);
|
||||||
|
Serial.println("running geteph\n");
|
||||||
|
disp.rdis->drawString(0, 1, buf+21);
|
||||||
|
|
||||||
|
if(!client.connect(ftpserver, 21)) {
|
||||||
|
Serial.println("FTP connection to www.ngs.noaa.gov failed");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
#if 0
|
||||||
|
while(!client.available()) delay(1);
|
||||||
|
while(client.available()) {
|
||||||
|
String s = client.readStringUntil('\n');
|
||||||
|
Serial.println(s);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
if(getreply()>='4') { Serial.println("connected failed"); return; }
|
||||||
|
client.print("USER anonymous\r\n");
|
||||||
|
if(getreply()>='4') { Serial.println("USER failed"); return; }
|
||||||
|
client.print("PASS anonymous\r\n");
|
||||||
|
if(getreply()>='4') { Serial.println("PASS failed"); return; }
|
||||||
|
client.print("TYPE I\r\n");
|
||||||
|
if(getreply()>='4') { Serial.println("TYPE I failed"); return; }
|
||||||
|
client.print("PASV\r\n");
|
||||||
|
String s = client.readStringUntil('\n');
|
||||||
|
Serial.println(s);
|
||||||
|
if(s.c_str()[0]>='4') { Serial.println("PASV failed"); return; }
|
||||||
|
int array_pasv[6];
|
||||||
|
char *tStr = strtok((char *)s.c_str(), "(,");
|
||||||
|
for(int i=0; i<6; i++) {
|
||||||
|
tStr = strtok(NULL, "(,");
|
||||||
|
if(tStr==NULL) {
|
||||||
|
Serial.println("strange response to PASV");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
array_pasv[i] = atoi(tStr);
|
||||||
|
Serial.println(array_pasv[i]);
|
||||||
|
}
|
||||||
|
uint16_t port = (array_pasv[4]<<8) | (array_pasv[5]&0xff);
|
||||||
|
WiFiClient dclient;
|
||||||
|
Serial.printf("connecting to %s:%d\n", ftpserver,port);
|
||||||
|
dclient.connect(ftpserver, port);
|
||||||
|
if(!dclient) {
|
||||||
|
Serial.println("data connection failed");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
client.print("RETR ");
|
||||||
|
Serial.printf("fetching %s with FTP...\n", buf);
|
||||||
|
client.println(buf);
|
||||||
|
s = client.readStringUntil('\n');
|
||||||
|
Serial.println(s);
|
||||||
|
if(s.c_str()[0]>='4') { Serial.println("RETR failed"); return; }
|
||||||
|
int len=0;
|
||||||
|
while(dclient.connected()) {
|
||||||
|
while(dclient.available()) {
|
||||||
|
char c = dclient.read();
|
||||||
|
fh.write(c);
|
||||||
|
len++;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
Serial.printf("fetched %d bytes\n", len);
|
||||||
|
fh.close();
|
||||||
|
snprintf(buf, 16, "Fetched %d B ",len);
|
||||||
|
buf[16]=0;
|
||||||
|
disp.rdis->drawString(0,2,buf);
|
||||||
|
|
||||||
|
disp.rdis->drawString(0,4,"Decompressing...");
|
||||||
|
// decompression
|
||||||
|
tinfl_decompressor *decomp = (tinfl_decompressor *)malloc(sizeof(tinfl_decompressor));
|
||||||
|
tinfl_init(decomp);
|
||||||
|
File file = SPIFFS.open("/brdc.gz","r");
|
||||||
|
if(!file) {
|
||||||
|
Serial.println("cannot open file\n");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
File ofile = SPIFFS.open("/brdc", "w");
|
||||||
|
if(!ofile) {
|
||||||
|
Serial.println("cannot open file /brdc for writing");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
file.readBytes(buf, 10); // skip gzip header
|
||||||
|
char flags = buf[3];
|
||||||
|
if(flags&0x07) {
|
||||||
|
Serial.println("Unsupported flags in gzip header, may or may not cause a problem");
|
||||||
|
}
|
||||||
|
if(flags&0x08) { // skip file name extra header
|
||||||
|
do {
|
||||||
|
int res=file.readBytes(buf, 1);
|
||||||
|
if(res!=1) return;
|
||||||
|
} while(*buf);
|
||||||
|
}
|
||||||
|
if(flags&0x10) { // skip file name extra header
|
||||||
|
do {
|
||||||
|
int res=file.readBytes(buf, 1);
|
||||||
|
if(res!=1) return;
|
||||||
|
} while(*buf);
|
||||||
|
}
|
||||||
|
int opos = 0;
|
||||||
|
int total = 0;
|
||||||
|
Serial.println("Decompressing ephemeris data...\n");
|
||||||
|
char *obuf =(char *)malloc(32768);
|
||||||
|
char *ibuf =(char *)malloc(8192);
|
||||||
|
while(file.available()) {
|
||||||
|
size_t len = file.readBytes(ibuf, 8192);
|
||||||
|
size_t inofs = 0;
|
||||||
|
size_t inlen = len;
|
||||||
|
while(inofs<len) {
|
||||||
|
size_t outlen=32768-opos;
|
||||||
|
int res = tinfl_decompress(decomp, (const mz_uint8 *)ibuf+inofs, &inlen, (uint8_t *)obuf, (mz_uint8 *)obuf+opos, &outlen, TINFL_FLAG_HAS_MORE_INPUT);
|
||||||
|
if(res<0) break;
|
||||||
|
if(outlen==0) break;
|
||||||
|
Serial.printf("... (res=%d) decompressed %d into %d bytes\n", res, inlen, outlen);
|
||||||
|
inofs += inlen;
|
||||||
|
inlen = len - inofs;
|
||||||
|
//size_t retv = ofile.write((uint8_t *)(obuf+opos), outlen);
|
||||||
|
//Serial.printf("write %d bytes\n", retv);
|
||||||
|
writeFully(ofile, (uint8_t *)(obuf+opos), outlen);
|
||||||
|
//Serial.write((uint8_t *)(obuf+opos), outlen);
|
||||||
|
total += outlen;
|
||||||
|
opos += outlen;
|
||||||
|
if(res==0) break; // done indication
|
||||||
|
if(opos>=32768) {
|
||||||
|
Serial.printf("... decompressed %d bytes\n", total);
|
||||||
|
opos=0;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
// maybe todo: check crc?!?
|
||||||
|
Serial.printf("done extracing content (total length: %d)\n", total);
|
||||||
|
status = SPIFFS.open("/brdc.time","w");
|
||||||
|
status.println(nowstr);
|
||||||
|
status.close();
|
||||||
|
snprintf(buf, 16, "Done: %d B ",total);
|
||||||
|
buf[16]=0;
|
||||||
|
disp.rdis->drawString(0,5,buf);
|
||||||
|
delay(1000);
|
||||||
|
|
||||||
|
free(obuf);
|
||||||
|
free(ibuf);
|
||||||
|
free(decomp);
|
||||||
|
file.close();
|
||||||
|
ofile.close();
|
||||||
|
}
|
||||||
3
libraries/SondeLib/geteph.h
Executable file
3
libraries/SondeLib/geteph.h
Executable file
|
|
@ -0,0 +1,3 @@
|
||||||
|
|
||||||
|
void geteph();
|
||||||
|
|
||||||
26
libraries/SondeLib/gfxfont.h
Executable file
26
libraries/SondeLib/gfxfont.h
Executable file
|
|
@ -0,0 +1,26 @@
|
||||||
|
// SPDX-License-Identifier: GPL-3.0
|
||||||
|
// original source: https://github.com/Nkawu/TFT_22_ILI9225
|
||||||
|
|
||||||
|
// Font structures like Adafruit_GFX (1.1 and later).
|
||||||
|
// Example fonts are included in 'fonts' directory.
|
||||||
|
// To use a font in your Arduino sketch, #include the corresponding .h
|
||||||
|
// file and pass address of GFXfont struct to setFont().
|
||||||
|
|
||||||
|
#ifndef _GFFFONT_H_
|
||||||
|
#define _GFFFONT_H_
|
||||||
|
|
||||||
|
typedef struct { // Data stored PER GLYPH
|
||||||
|
uint16_t bitmapOffset; // Pointer into GFXfont->bitmap
|
||||||
|
uint8_t width, height; // Bitmap dimensions in pixels
|
||||||
|
uint8_t xAdvance; // Distance to advance cursor (x axis)
|
||||||
|
int8_t xOffset, yOffset; // Dist from cursor pos to UL corner
|
||||||
|
} GFXglyph;
|
||||||
|
|
||||||
|
typedef struct { // Data stored for FONT AS A WHOLE:
|
||||||
|
uint8_t *bitmap; // Glyph bitmaps, concatenated
|
||||||
|
GFXglyph *glyph; // Glyph array
|
||||||
|
uint8_t first, last; // ASCII extents
|
||||||
|
uint8_t yAdvance; // Newline distance (y axis)
|
||||||
|
} GFXfont;
|
||||||
|
|
||||||
|
#endif // _GFFFONT_H_
|
||||||
1866
libraries/SondeLib/nav_gps_vel.cpp
Executable file
1866
libraries/SondeLib/nav_gps_vel.cpp
Executable file
File diff suppressed because it is too large
Load Diff
148
libraries/SondeLib/nav_gps_vel.h
Executable file
148
libraries/SondeLib/nav_gps_vel.h
Executable file
|
|
@ -0,0 +1,148 @@
|
||||||
|
|
||||||
|
|
||||||
|
typedef struct {
|
||||||
|
uint16_t prn;
|
||||||
|
uint16_t week;
|
||||||
|
uint32_t toa;
|
||||||
|
char epoch[20];
|
||||||
|
double toe;
|
||||||
|
double toc;
|
||||||
|
double e;
|
||||||
|
double delta_n;
|
||||||
|
double delta_i;
|
||||||
|
double i0;
|
||||||
|
double OmegaDot;
|
||||||
|
double sqrta;
|
||||||
|
double Omega0;
|
||||||
|
double w;
|
||||||
|
double M0;
|
||||||
|
double tgd;
|
||||||
|
double idot;
|
||||||
|
double cuc;
|
||||||
|
double cus;
|
||||||
|
double crc;
|
||||||
|
double crs;
|
||||||
|
double cic;
|
||||||
|
double cis;
|
||||||
|
double af0;
|
||||||
|
double af1;
|
||||||
|
double af2;
|
||||||
|
int gpsweek;
|
||||||
|
uint16_t svn;
|
||||||
|
uint8_t ura;
|
||||||
|
uint8_t health;
|
||||||
|
uint8_t conf;
|
||||||
|
} EPHEM_t;
|
||||||
|
|
||||||
|
|
||||||
|
typedef struct {
|
||||||
|
uint32_t t;
|
||||||
|
double pseudorange;
|
||||||
|
double pseudorate;
|
||||||
|
double clock_corr;
|
||||||
|
double clock_drift;
|
||||||
|
double X;
|
||||||
|
double Y;
|
||||||
|
double Z;
|
||||||
|
double vX;
|
||||||
|
double vY;
|
||||||
|
double vZ;
|
||||||
|
int ephhr;
|
||||||
|
double PR;
|
||||||
|
double ephtime;
|
||||||
|
int prn;
|
||||||
|
} SAT_t;
|
||||||
|
|
||||||
|
|
||||||
|
typedef struct {double X; double Y; double Z;} LOC_t;
|
||||||
|
|
||||||
|
typedef struct {double X; double Y; double Z;
|
||||||
|
double vX; double vY; double vZ;} VEL_t;
|
||||||
|
|
||||||
|
|
||||||
|
double dist(double X1, double Y1, double Z1, double X2, double Y2, double Z2);
|
||||||
|
|
||||||
|
void GPS_SatelliteClockCorrection(
|
||||||
|
const unsigned short transmission_gpsweek, // GPS week when signal was transmit (0-1024+) [weeks]
|
||||||
|
const double transmission_gpstow, // GPS time of week when signal was transmit [s]
|
||||||
|
const unsigned short ephem_week, // ephemeris: GPS week (0-1024+) [weeks]
|
||||||
|
const double toe, // ephemeris: time of week [s]
|
||||||
|
const double toc, // ephemeris: clock reference time of week [s]
|
||||||
|
const double af0, // ephemeris: polynomial clock correction coefficient [s],
|
||||||
|
const double af1, // ephemeris: polynomial clock correction coefficient [s/s],
|
||||||
|
const double af2, // ephemeris: polynomial clock correction coefficient [s/s^2]
|
||||||
|
const double ecc, // ephemeris: eccentricity of satellite orbit []
|
||||||
|
const double sqrta, // ephemeris: square root of the semi-major axis of orbit [m^(1/2)]
|
||||||
|
const double delta_n, // ephemeris: mean motion difference from computed value [rad]
|
||||||
|
const double m0, // ephemeris: mean anomaly at reference time [rad]
|
||||||
|
const double tgd, // ephemeris: group delay differential between L1 and L2 [s]
|
||||||
|
double* clock_correction );
|
||||||
|
|
||||||
|
void GPS_SatellitePosition_Ephem(
|
||||||
|
const unsigned short gpsweek, // gps week of signal transmission (0-1024+) [week]
|
||||||
|
const double gpstow, // time of week of signal transmission (gpstow-psr/c) [s]
|
||||||
|
EPHEM_t ephem,
|
||||||
|
double* clock_correction, // clock correction for this satellite for this epoch [m]
|
||||||
|
double* satX, // satellite X position WGS84 ECEF [m]
|
||||||
|
double* satY, // satellite Y position WGS84 ECEF [m]
|
||||||
|
double* satZ // satellite Z position WGS84 ECEF [m]
|
||||||
|
);
|
||||||
|
|
||||||
|
void GPS_SatelliteClockDriftCorrection(
|
||||||
|
const unsigned short transmission_gpsweek, // GPS week when signal was transmit (0-1024+) [weeks]
|
||||||
|
const double transmission_gpstow, // GPS time of week when signal was transmit [s]
|
||||||
|
const unsigned short ephem_week, // ephemeris: GPS week (0-1024+) [weeks]
|
||||||
|
const double toe, // ephemeris: time of week [s]
|
||||||
|
const double toc, // ephemeris: clock reference time of week [s]
|
||||||
|
const double af0, // ephemeris: polynomial clock correction coefficient [s],
|
||||||
|
const double af1, // ephemeris: polynomial clock correction coefficient [s/s],
|
||||||
|
const double af2, // ephemeris: polynomial clock correction coefficient [s/s^2]
|
||||||
|
const double ecc, // ephemeris: eccentricity of satellite orbit []
|
||||||
|
const double sqrta, // ephemeris: square root of the semi-major axis of orbit [m^(1/2)]
|
||||||
|
const double delta_n, // ephemeris: mean motion difference from computed value [rad]
|
||||||
|
const double m0, // ephemeris: mean anomaly at reference time [rad]
|
||||||
|
const double tgd, // ephemeris: group delay differential between L1 and L2 [s]
|
||||||
|
double* clock_correction, // ephemeris: satellite clock correction [m]
|
||||||
|
double* clock_drift ) ;
|
||||||
|
|
||||||
|
void GPS_SatellitePositionVelocity_Ephem(
|
||||||
|
const unsigned short gpsweek, // gps week of signal transmission (0-1024+) [week]
|
||||||
|
const double gpstow, // time of week of signal transmission (gpstow-psr/c) [s]
|
||||||
|
EPHEM_t ephem,
|
||||||
|
double* clock_correction, // clock correction for this satellite for this epoch [m]
|
||||||
|
double* clock_drift, // clock correction for this satellite for this epoch [m]
|
||||||
|
double* satX, // satellite X position WGS84 ECEF [m]
|
||||||
|
double* satY, // satellite Y position WGS84 ECEF [m]
|
||||||
|
double* satZ, // satellite Z position WGS84 ECEF [m]
|
||||||
|
double* satvX, // satellite X velocity WGS84 ECEF [m]
|
||||||
|
double* satvY, // satellite Y velocity WGS84 ECEF [m]
|
||||||
|
double* satvZ // satellite Z velocity WGS84 ECEF [m]
|
||||||
|
);
|
||||||
|
|
||||||
|
|
||||||
|
int NAV_ClosedFormSolution_FromPseudorange(
|
||||||
|
SAT_t sats[4], // input: satellite position and pseudorange
|
||||||
|
double* latitude, // output: ellipsoid latitude [rad]
|
||||||
|
double* longitude, // ellipsoid longitude [rad]
|
||||||
|
double* height, // ellipsoid height [m]
|
||||||
|
double* rx_clock_bias, // receiver clock bias [m]
|
||||||
|
double pos_ecef[3] );
|
||||||
|
|
||||||
|
int calc_DOPn(int n, SAT_t satss[], double pos_ecef[3], double DOP[4]);
|
||||||
|
|
||||||
|
int NAV_LinP(int N, SAT_t satv[], double pos_ecef[3], double dt,
|
||||||
|
double dpos_ecef[3], double *cc);
|
||||||
|
void ecef2elli(double X, double Y, double Z, double *lat, double *lon, double *alt);
|
||||||
|
|
||||||
|
int NAV_LinP(int N, SAT_t satv[], double pos_ecef[3], double dt,
|
||||||
|
double dpos_ecef[3], double *cc);
|
||||||
|
|
||||||
|
int NAV_LinV(int N, SAT_t satv[], double pos_ecef[3],
|
||||||
|
double vel_ecef[3], double dt,
|
||||||
|
double dvel_ecef[3], double *cc);
|
||||||
|
|
||||||
|
int NAV_bancroft1(int N, SAT_t sats[], double pos_ecef[3], double *cc);
|
||||||
|
|
||||||
|
EPHEM_t *read_RNXpephs(const char *file);
|
||||||
|
|
||||||
|
|
||||||
1735
libraries/SondeLib/rs92gps.cpp
Executable file
1735
libraries/SondeLib/rs92gps.cpp
Executable file
File diff suppressed because it is too large
Load Diff
22
libraries/SondeLib/rs92gps.h
Executable file
22
libraries/SondeLib/rs92gps.h
Executable file
|
|
@ -0,0 +1,22 @@
|
||||||
|
|
||||||
|
typedef struct {
|
||||||
|
int frnr;
|
||||||
|
char id[11];
|
||||||
|
int week; int gpssec;
|
||||||
|
int jahr; int monat; int tag;
|
||||||
|
int wday;
|
||||||
|
int std; int min; float sek;
|
||||||
|
double lat; double lon; double alt;
|
||||||
|
double vH; double vD; double vU;
|
||||||
|
int k;
|
||||||
|
int sats[4];
|
||||||
|
double dop;
|
||||||
|
int freq;
|
||||||
|
unsigned short aux[4];
|
||||||
|
double diter;
|
||||||
|
} gpx_t;
|
||||||
|
|
||||||
|
extern gpx_t gpx;
|
||||||
|
|
||||||
|
void print_frame(uint8_t *data, int len);
|
||||||
|
void get_eph(const char *file);
|
||||||
32
libraries/SondeLib/rsc.cpp
Executable file
32
libraries/SondeLib/rsc.cpp
Executable file
|
|
@ -0,0 +1,32 @@
|
||||||
|
/*
|
||||||
|
* dxlAPRS toolchain
|
||||||
|
*
|
||||||
|
* Copyright (C) Christian Rabler <oe5dxl@oevsv.at>
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef inttypes_h
|
||||||
|
#include <inttypes.h>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define N 255
|
||||||
|
#define R 24
|
||||||
|
#define K (N-R)
|
||||||
|
|
||||||
|
void *init_rs_char(int symsize,int gfpoly,int fcr,int prim,int nroots,int pad);
|
||||||
|
int decode_rs_char(void *arg,
|
||||||
|
unsigned char *data, int *eras_pos, int no_eras);
|
||||||
|
|
||||||
|
void *rs;
|
||||||
|
|
||||||
|
void initrsc()
|
||||||
|
{
|
||||||
|
rs = init_rs_char( 8, 0x11d, 0, 1, R, 0);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
int decodersc(char *data, uint32_t *eras_pos, uint32_t no_eras)
|
||||||
|
{
|
||||||
|
return decode_rs_char(rs, (unsigned char *)data, (int *)eras_pos, no_eras);
|
||||||
|
}
|
||||||
17
libraries/SondeLib/rsc.h
Executable file
17
libraries/SondeLib/rsc.h
Executable file
|
|
@ -0,0 +1,17 @@
|
||||||
|
/*
|
||||||
|
* dxlAPRS toolchain
|
||||||
|
*
|
||||||
|
* Copyright (C) Christian Rabler <oe5dxl@oevsv.at>
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
#ifndef rsc_H_
|
||||||
|
#define rsc_H_
|
||||||
|
|
||||||
|
|
||||||
|
long decodersc(char [], uint32_t [], uint32_t);
|
||||||
|
|
||||||
|
void initrsc(void);
|
||||||
|
|
||||||
|
|
||||||
|
#endif /* rsc_H_ */
|
||||||
436
libraries/SondeLib/rsc_decode.cpp
Executable file
436
libraries/SondeLib/rsc_decode.cpp
Executable file
|
|
@ -0,0 +1,436 @@
|
||||||
|
/*
|
||||||
|
* Copyright 2016 Hannes Schmelzer, OE5HPM
|
||||||
|
* doing several cleanups and architecture changes, no functional change yet
|
||||||
|
*
|
||||||
|
* General purpose Reed-Solomon decoder for 8-bit symbols or less
|
||||||
|
* Copyright 2003 Phil Karn, KA9Q
|
||||||
|
* May be used under the terms of the GNU Lesser General Public License (LGPL)
|
||||||
|
*
|
||||||
|
* The guts of the Reed-Solomon decoder, meant to be #included
|
||||||
|
* into a function body with the following typedefs, macros and variables supplied
|
||||||
|
* according to the code parameters:
|
||||||
|
|
||||||
|
* data_t - a typedef for the data symbol
|
||||||
|
* data_t data[] - array of rs->nn data and parity symbols to be corrected in place
|
||||||
|
* retval - an integer lvalue into which the decoder's return code is written
|
||||||
|
* NROOTS - the number of roots in the RS code generator polynomial,
|
||||||
|
* which is the same as the number of parity symbols in a block.
|
||||||
|
Integer variable or literal.
|
||||||
|
* rs->nn - the total number of symbols in a RS block. Integer variable or literal.
|
||||||
|
* rs->pad - the number of pad symbols in a block. Integer variable or literal.
|
||||||
|
* rs->alpha_to - The address of an array of rs->nn elements to convert Galois field
|
||||||
|
* elements in index (log) form to polynomial form. Read only.
|
||||||
|
* rs->index_of - The address of an array of rs->nn elements to convert Galois field
|
||||||
|
* elements in polynomial form to index (log) form. Read only.
|
||||||
|
* MODNN - a function to reduce its argument modulo rs->nn. May be inline or a macro.
|
||||||
|
* rs->fcr - An integer literal or variable specifying the first consecutive root of the
|
||||||
|
* Reed-Solomon generator polynomial. Integer variable or literal.
|
||||||
|
* rs->prim - The primitive root of the generator poly. Integer variable or literal.
|
||||||
|
* DEBUG - If set to 1 or more, do various internal consistency checking. Leave this
|
||||||
|
* undefined for production code
|
||||||
|
|
||||||
|
* The memset(), memmove(), and memcpy() functions are used. The appropriate header
|
||||||
|
* file declaring these functions (usually <string.h>) must be included by the calling
|
||||||
|
* program.
|
||||||
|
*/
|
||||||
|
#include <stdio.h>
|
||||||
|
#include <stdlib.h>
|
||||||
|
#include <string.h>
|
||||||
|
|
||||||
|
struct rs {
|
||||||
|
unsigned int magic; /* struct magic */
|
||||||
|
int mm; /* Bits per symbol */
|
||||||
|
int nn; /* Symbols per block (= (1<<mm)-1) */
|
||||||
|
unsigned char *alpha_to; /* log lookup table */
|
||||||
|
unsigned char *index_of; /* Antilog lookup table */
|
||||||
|
unsigned char *genpoly; /* Generator polynomial */
|
||||||
|
int nroots; /*
|
||||||
|
* Number of generator
|
||||||
|
* roots = number of parity symbols
|
||||||
|
*/
|
||||||
|
int fcr; /* First consecutive root, index form */
|
||||||
|
int prim; /* Primitive element, index form */
|
||||||
|
int iprim; /* prim-th root of 1, index form */
|
||||||
|
int pad; /* Padding bytes in shortened block */
|
||||||
|
};
|
||||||
|
|
||||||
|
static inline int modnn(struct rs *rs,int x)
|
||||||
|
{
|
||||||
|
while (x >= rs->nn) {
|
||||||
|
x -= rs->nn;
|
||||||
|
x = (x >> rs->mm) + (x & rs->nn);
|
||||||
|
}
|
||||||
|
return x;
|
||||||
|
}
|
||||||
|
|
||||||
|
#define MODNN(x) modnn(rs, x)
|
||||||
|
#define MIN(a,b) ((a) < (b) ? (a) : (b))
|
||||||
|
#define MAGIC 0xABCD6722
|
||||||
|
|
||||||
|
void free_rs_char(void *arg)
|
||||||
|
{
|
||||||
|
struct rs *rs = (struct rs *)arg;
|
||||||
|
|
||||||
|
if (rs == NULL)
|
||||||
|
return;
|
||||||
|
if (rs->magic != MAGIC)
|
||||||
|
return;
|
||||||
|
|
||||||
|
if (rs->alpha_to != NULL)
|
||||||
|
free(rs->alpha_to);
|
||||||
|
if (rs->index_of != NULL)
|
||||||
|
free(rs->index_of);
|
||||||
|
if (rs->genpoly != NULL)
|
||||||
|
free(rs->genpoly);
|
||||||
|
free(rs);
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Initialize a Reed-Solomon codec
|
||||||
|
* symsize = symbol size, bits
|
||||||
|
* gfpoly = Field generator polynomial coefficients
|
||||||
|
* fcr = first root of RS code generator polynomial, index form
|
||||||
|
* prim = primitive element to generate polynomial roots
|
||||||
|
* nroots = RS code generator polynomial degree (number of roots)
|
||||||
|
* pad = padding bytes at front of shortened block
|
||||||
|
*/
|
||||||
|
void *init_rs_char(int symsize, int gfpoly, int fcr, int prim,
|
||||||
|
int nroots, int pad)
|
||||||
|
{
|
||||||
|
struct rs *rs;
|
||||||
|
|
||||||
|
int i, j, sr,root,iprim;
|
||||||
|
|
||||||
|
/* Check parameter ranges */
|
||||||
|
if (symsize < 0 || symsize > 8*sizeof(unsigned char))
|
||||||
|
return NULL;
|
||||||
|
if (fcr < 0 || fcr >= (1<<symsize))
|
||||||
|
return NULL;
|
||||||
|
if (prim <= 0 || prim >= (1<<symsize))
|
||||||
|
return NULL;
|
||||||
|
if (nroots < 0 || nroots >= (1<<symsize))
|
||||||
|
return NULL;
|
||||||
|
if (pad < 0 || pad >= ((1<<symsize) -1 - nroots))
|
||||||
|
return NULL;
|
||||||
|
|
||||||
|
rs = (struct rs*)malloc(sizeof(*rs));
|
||||||
|
if (rs == NULL) {
|
||||||
|
printf("%s: cannot allocate memory!\n", __func__);
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
memset(rs, 0, sizeof(*rs));
|
||||||
|
rs->magic = MAGIC;
|
||||||
|
|
||||||
|
rs->mm = symsize;
|
||||||
|
rs->nn = (1<<symsize)-1;
|
||||||
|
rs->pad = pad;
|
||||||
|
|
||||||
|
rs->alpha_to = (unsigned char *)malloc(sizeof(unsigned char)*(rs->nn+1));
|
||||||
|
if (rs->alpha_to == NULL) {
|
||||||
|
free(rs);
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
rs->index_of = (unsigned char *)malloc(sizeof(unsigned char)*(rs->nn+1));
|
||||||
|
if (rs->index_of == NULL) {
|
||||||
|
free(rs->alpha_to);
|
||||||
|
free(rs);
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Generate Galois field lookup tables */
|
||||||
|
rs->index_of[0] = rs->nn; /* log(zero) = -inf */
|
||||||
|
rs->alpha_to[rs->nn] = 0; /* alpha**-inf = 0 */
|
||||||
|
sr = 1;
|
||||||
|
for (i = 0; i < rs->nn; i++) {
|
||||||
|
rs->index_of[sr] = i;
|
||||||
|
rs->alpha_to[i] = sr;
|
||||||
|
sr <<= 1;
|
||||||
|
if (sr & (1<<symsize))
|
||||||
|
sr ^= gfpoly;
|
||||||
|
sr &= rs->nn;
|
||||||
|
}
|
||||||
|
if (sr != 1) {
|
||||||
|
/* field generator polynomial is not primitive! */
|
||||||
|
free(rs->alpha_to);
|
||||||
|
free(rs->index_of);
|
||||||
|
free(rs);
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Form RS code generator polynomial from its roots */
|
||||||
|
rs->genpoly = (unsigned char *)malloc(sizeof(unsigned char)*(nroots+1));
|
||||||
|
if(rs->genpoly == NULL) {
|
||||||
|
free(rs->alpha_to);
|
||||||
|
free(rs->index_of);
|
||||||
|
free(rs);
|
||||||
|
return NULL;
|
||||||
|
}
|
||||||
|
rs->fcr = fcr;
|
||||||
|
rs->prim = prim;
|
||||||
|
rs->nroots = nroots;
|
||||||
|
|
||||||
|
/* Find prim-th root of 1, used in decoding */
|
||||||
|
for (iprim = 1; (iprim % prim) != 0; iprim += rs->nn)
|
||||||
|
;
|
||||||
|
rs->iprim = iprim / prim;
|
||||||
|
|
||||||
|
rs->genpoly[0] = 1;
|
||||||
|
for (i = 0, root = fcr*prim; i < nroots; i++, root += prim) {
|
||||||
|
rs->genpoly[i+1] = 1;
|
||||||
|
|
||||||
|
/* Multiply rs->genpoly[] by @**(root + x) */
|
||||||
|
for (j = i; j > 0; j--) {
|
||||||
|
if (rs->genpoly[j] != 0)
|
||||||
|
rs->genpoly[j] = rs->genpoly[j-1] ^ rs->alpha_to[modnn(rs,rs->index_of[rs->genpoly[j]] + root)];
|
||||||
|
else
|
||||||
|
rs->genpoly[j] = rs->genpoly[j-1];
|
||||||
|
}
|
||||||
|
/* rs->genpoly[0] can never be zero */
|
||||||
|
rs->genpoly[0] = rs->alpha_to[modnn(rs,rs->index_of[rs->genpoly[0]] + root)];
|
||||||
|
}
|
||||||
|
/* convert rs->genpoly[] to index form for quicker encoding */
|
||||||
|
for (i = 0; i <= nroots; i++)
|
||||||
|
rs->genpoly[i] = rs->index_of[rs->genpoly[i]];
|
||||||
|
|
||||||
|
return rs;
|
||||||
|
}
|
||||||
|
|
||||||
|
int decode_rs_char(void *arg,
|
||||||
|
unsigned char *data, int *eras_pos, int no_eras)
|
||||||
|
{
|
||||||
|
struct rs *rs = (struct rs *)arg;
|
||||||
|
|
||||||
|
if (rs == NULL)
|
||||||
|
return -1;
|
||||||
|
if (rs->magic != MAGIC)
|
||||||
|
return -1;
|
||||||
|
|
||||||
|
int retval;
|
||||||
|
int deg_lambda, el, deg_omega;
|
||||||
|
int i, j, r,k;
|
||||||
|
|
||||||
|
unsigned char u,q,tmp,num1,num2,den,discr_r;
|
||||||
|
unsigned char lambda[rs->nroots+1], s[rs->nroots]; /* Err+Eras Locator poly
|
||||||
|
* and syndrome poly */
|
||||||
|
unsigned char b[rs->nroots+1], t[rs->nroots+1], omega[rs->nroots+1];
|
||||||
|
unsigned char root[rs->nroots], reg[rs->nroots+1], loc[rs->nroots];
|
||||||
|
int syn_error, count;
|
||||||
|
|
||||||
|
/* form the syndromes; i.e., evaluate data(x) at roots of g(x) */
|
||||||
|
for (i = 0; i < rs->nroots; i++)
|
||||||
|
s[i] = data[0];
|
||||||
|
|
||||||
|
for (j = 1; j < rs->nn-rs->pad; j++) {
|
||||||
|
for(i=0;i<rs->nroots;i++) {
|
||||||
|
if(s[i] == 0) {
|
||||||
|
s[i] = data[j];
|
||||||
|
} else {
|
||||||
|
s[i] = data[j] ^ rs->alpha_to[MODNN(rs->index_of[s[i]] + (rs->fcr+i)*rs->prim)];
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Convert syndromes to index form, checking for nonzero condition */
|
||||||
|
syn_error = 0;
|
||||||
|
for (i = 0; i < rs->nroots; i++) {
|
||||||
|
syn_error |= s[i];
|
||||||
|
s[i] = rs->index_of[s[i]];
|
||||||
|
}
|
||||||
|
|
||||||
|
if (!syn_error) {
|
||||||
|
/* if syndrome is zero, data[] is a codeword and there are no
|
||||||
|
* errors to correct. So return data[] unmodified
|
||||||
|
*/
|
||||||
|
count = 0;
|
||||||
|
goto finish;
|
||||||
|
}
|
||||||
|
memset(&lambda[1], 0, rs->nroots*sizeof(lambda[0]));
|
||||||
|
lambda[0] = 1;
|
||||||
|
|
||||||
|
if (no_eras > 0) {
|
||||||
|
/* Init lambda to be the erasure locator polynomial */
|
||||||
|
lambda[1] = rs->alpha_to[MODNN(rs->prim*(rs->nn-1-eras_pos[0]))];
|
||||||
|
for (i = 1; i < no_eras; i++) {
|
||||||
|
u = MODNN(rs->prim*(rs->nn-1-eras_pos[i]));
|
||||||
|
for (j = i+1; j > 0; j--) {
|
||||||
|
tmp = rs->index_of[lambda[j - 1]];
|
||||||
|
if(tmp != rs->nn)
|
||||||
|
lambda[j] ^= rs->alpha_to[MODNN(u + tmp)];
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#if DEBUG >= 1
|
||||||
|
/* Test code that verifies the erasure locator polynomial just constructed
|
||||||
|
Needed only for decoder debugging. */
|
||||||
|
|
||||||
|
/* find roots of the erasure location polynomial */
|
||||||
|
for(i=1;i<=no_eras;i++)
|
||||||
|
reg[i] = rs->index_of[lambda[i]];
|
||||||
|
|
||||||
|
count = 0;
|
||||||
|
for (i = 1,k=rs->iprim-1; i <= rs->nn; i++,k = MODNN(k+rs->iprim)) {
|
||||||
|
q = 1;
|
||||||
|
for (j = 1; j <= no_eras; j++)
|
||||||
|
if (reg[j] != rs->nn) {
|
||||||
|
reg[j] = MODNN(reg[j] + j);
|
||||||
|
q ^= rs->alpha_to[reg[j]];
|
||||||
|
}
|
||||||
|
if (q != 0)
|
||||||
|
continue;
|
||||||
|
/* store root and error location number indices */
|
||||||
|
root[count] = i;
|
||||||
|
loc[count] = k;
|
||||||
|
count++;
|
||||||
|
}
|
||||||
|
if (count != no_eras) {
|
||||||
|
printf("count = %d no_eras = %d\n lambda(x) is WRONG\n",count,no_eras);
|
||||||
|
count = -1;
|
||||||
|
goto finish;
|
||||||
|
}
|
||||||
|
#if DEBUG >= 2
|
||||||
|
printf("\n Erasure positions as determined by roots of Eras Loc Poly:\n");
|
||||||
|
for (i = 0; i < count; i++)
|
||||||
|
printf("%d ", loc[i]);
|
||||||
|
printf("\n");
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
for (i = 0; i < rs->nroots+1; i++)
|
||||||
|
b[i] = rs->index_of[lambda[i]];
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Begin Berlekamp-Massey algorithm to determine error+erasure
|
||||||
|
* locator polynomial
|
||||||
|
*/
|
||||||
|
r = no_eras;
|
||||||
|
el = no_eras;
|
||||||
|
while (++r <= rs->nroots) { /* r is the step number */
|
||||||
|
/* Compute discrepancy at the r-th step in poly-form */
|
||||||
|
discr_r = 0;
|
||||||
|
for (i = 0; i < r; i++) {
|
||||||
|
if ((lambda[i] != 0) && (s[r-i-1] != rs->nn)) {
|
||||||
|
discr_r ^= rs->alpha_to[MODNN(rs->index_of[lambda[i]] + s[r-i-1])];
|
||||||
|
}
|
||||||
|
}
|
||||||
|
discr_r = rs->index_of[discr_r]; /* Index form */
|
||||||
|
if (discr_r == rs->nn) {
|
||||||
|
/* 2 lines below: B(x) <-- x*B(x) */
|
||||||
|
memmove(&b[1],b,rs->nroots*sizeof(b[0]));
|
||||||
|
b[0] = rs->nn;
|
||||||
|
} else {
|
||||||
|
/* 7 lines below: T(x) <-- lambda(x) - discr_r*x*b(x) */
|
||||||
|
t[0] = lambda[0];
|
||||||
|
for (i = 0 ; i < rs->nroots; i++) {
|
||||||
|
if(b[i] != rs->nn)
|
||||||
|
t[i+1] = lambda[i+1] ^ rs->alpha_to[MODNN(discr_r + b[i])];
|
||||||
|
else
|
||||||
|
t[i+1] = lambda[i+1];
|
||||||
|
}
|
||||||
|
if (2 * el <= r + no_eras - 1) {
|
||||||
|
el = r + no_eras - el;
|
||||||
|
/*
|
||||||
|
* 2 lines below: B(x) <-- inv(discr_r) *
|
||||||
|
* lambda(x)
|
||||||
|
*/
|
||||||
|
for (i = 0; i <= rs->nroots; i++)
|
||||||
|
b[i] = (lambda[i] == 0) ? rs->nn : MODNN(rs->index_of[lambda[i]] - discr_r + rs->nn);
|
||||||
|
} else {
|
||||||
|
/* 2 lines below: B(x) <-- x*B(x) */
|
||||||
|
memmove(&b[1],b,rs->nroots*sizeof(b[0]));
|
||||||
|
b[0] = rs->nn;
|
||||||
|
}
|
||||||
|
memcpy(lambda,t,(rs->nroots+1)*sizeof(t[0]));
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Convert lambda to index form and compute deg(lambda(x)) */
|
||||||
|
deg_lambda = 0;
|
||||||
|
for (i = 0;i < rs->nroots+1; i++){
|
||||||
|
lambda[i] = rs->index_of[lambda[i]];
|
||||||
|
if(lambda[i] != rs->nn)
|
||||||
|
deg_lambda = i;
|
||||||
|
}
|
||||||
|
/* Find roots of the error+erasure locator polynomial by Chien search */
|
||||||
|
memcpy(®[1], &lambda[1], rs->nroots*sizeof(reg[0]));
|
||||||
|
count = 0; /* Number of roots of lambda(x) */
|
||||||
|
for (i = 1,k=rs->iprim-1; i <= rs->nn; i++,k = MODNN(k+rs->iprim)) {
|
||||||
|
q = 1; /* lambda[0] is always 0 */
|
||||||
|
for (j = deg_lambda; j > 0; j--) {
|
||||||
|
if (reg[j] != rs->nn) {
|
||||||
|
reg[j] = MODNN(reg[j] + j);
|
||||||
|
q ^= rs->alpha_to[reg[j]];
|
||||||
|
}
|
||||||
|
}
|
||||||
|
if (q != 0)
|
||||||
|
continue; /* Not a root */
|
||||||
|
/* store root (index-form) and error location number */
|
||||||
|
#if DEBUG>=2
|
||||||
|
printf("count %d root %d loc %d\n",count,i,k);
|
||||||
|
#endif
|
||||||
|
root[count] = i;
|
||||||
|
loc[count] = k;
|
||||||
|
/* If we've already found max possible roots,
|
||||||
|
* abort the search to save time
|
||||||
|
*/
|
||||||
|
if(++count == deg_lambda)
|
||||||
|
break;
|
||||||
|
}
|
||||||
|
if (deg_lambda != count) {
|
||||||
|
/*
|
||||||
|
* deg(lambda) unequal to number of roots => uncorrectable
|
||||||
|
* error detected
|
||||||
|
*/
|
||||||
|
count = -1;
|
||||||
|
goto finish;
|
||||||
|
}
|
||||||
|
/*
|
||||||
|
* Compute err+eras evaluator poly omega(x) = s(x)*lambda(x) (modulo
|
||||||
|
* x**rs->nroots). in index form. Also find deg(omega).
|
||||||
|
*/
|
||||||
|
deg_omega = deg_lambda-1;
|
||||||
|
for (i = 0; i <= deg_omega;i++) {
|
||||||
|
tmp = 0;
|
||||||
|
for (j = i; j >= 0; j--) {
|
||||||
|
if ((s[i - j] != rs->nn) && (lambda[j] != rs->nn))
|
||||||
|
tmp ^= rs->alpha_to[MODNN(s[i - j] + lambda[j])];
|
||||||
|
}
|
||||||
|
omega[i] = rs->index_of[tmp];
|
||||||
|
}
|
||||||
|
/*
|
||||||
|
* Compute error values in poly-form. num1 = omega(inv(X(l))), num2 =
|
||||||
|
* inv(X(l))**(rs->fcr-1) and den = lambda_pr(inv(X(l))) all in poly-form
|
||||||
|
*/
|
||||||
|
for (j = count-1; j >=0; j--) {
|
||||||
|
num1 = 0;
|
||||||
|
for (i = deg_omega; i >= 0; i--) {
|
||||||
|
if (omega[i] != rs->nn)
|
||||||
|
num1 ^= rs->alpha_to[MODNN(omega[i] + i * root[j])];
|
||||||
|
}
|
||||||
|
num2 = rs->alpha_to[MODNN(root[j] * (rs->fcr - 1) + rs->nn)];
|
||||||
|
den = 0;
|
||||||
|
|
||||||
|
/* lambda[i+1] for i even is the formal derivative lambda_pr of lambda[i] */
|
||||||
|
for (i = MIN(deg_lambda, rs->nroots-1) & ~1; i >= 0; i -=2) {
|
||||||
|
if(lambda[i+1] != rs->nn)
|
||||||
|
den ^= rs->alpha_to[MODNN(lambda[i+1] + i * root[j])];
|
||||||
|
}
|
||||||
|
#if DEBUG >= 1
|
||||||
|
if (den == 0) {
|
||||||
|
printf("\n ERROR: denominator = 0\n");
|
||||||
|
count = -1;
|
||||||
|
goto finish;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
/* Apply error to data */
|
||||||
|
if (num1 != 0 && loc[j] >= rs->pad) {
|
||||||
|
data[loc[j]-rs->pad] ^= rs->alpha_to[MODNN(rs->index_of[num1] + rs->index_of[num2] + rs->nn - rs->index_of[den])];
|
||||||
|
}
|
||||||
|
}
|
||||||
|
finish:
|
||||||
|
if(eras_pos != NULL) {
|
||||||
|
for (i = 0; i < count; i++)
|
||||||
|
eras_pos[i] = loc[i];
|
||||||
|
}
|
||||||
|
retval = count;
|
||||||
|
|
||||||
|
return retval;
|
||||||
|
}
|
||||||
179
libraries/SondeLib/sd.h
Executable file
179
libraries/SondeLib/sd.h
Executable file
|
|
@ -0,0 +1,179 @@
|
||||||
|
#include "FS.h"
|
||||||
|
#include "SD_MMC.h"
|
||||||
|
//Write data RadioSonde on SD
|
||||||
|
|
||||||
|
//Fonction de gestion SD
|
||||||
|
void listDir(fs::FS &fs, const char * dirname, uint8_t levels){
|
||||||
|
Serial.printf("Listing directory: %s\n", dirname);
|
||||||
|
|
||||||
|
File root = fs.open(dirname);
|
||||||
|
if(!root){
|
||||||
|
Serial.println("Failed to open directory");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
if(!root.isDirectory()){
|
||||||
|
Serial.println("Not a directory");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
File file = root.openNextFile();
|
||||||
|
while(file){
|
||||||
|
if(file.isDirectory()){
|
||||||
|
Serial.print(" DIR : ");
|
||||||
|
Serial.println(file.name());
|
||||||
|
if(levels){
|
||||||
|
listDir(fs, file.name(), levels -1);
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
Serial.print(" FILE: ");
|
||||||
|
Serial.print(file.name());
|
||||||
|
Serial.print(" SIZE: ");
|
||||||
|
Serial.println(file.size());
|
||||||
|
}
|
||||||
|
file = root.openNextFile();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void createDir(fs::FS &fs, const char * path){
|
||||||
|
Serial.printf("Creating Dir: %s\n", path);
|
||||||
|
if(fs.mkdir(path)){
|
||||||
|
Serial.println("Dir created");
|
||||||
|
} else {
|
||||||
|
Serial.println("mkdir failed");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void readFile(fs::FS &fs, const char * path){
|
||||||
|
Serial.printf("Reading file: %s\n", path);
|
||||||
|
|
||||||
|
File file = fs.open(path);
|
||||||
|
if(!file){
|
||||||
|
Serial.println("Failed to open file for reading");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
Serial.print("Read from file: ");
|
||||||
|
while(file.available()){
|
||||||
|
Serial.write(file.read());
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void appendFile(fs::FS &fs, const char * path, const char * message){
|
||||||
|
Serial.printf("Appending to file: %s\n", path);
|
||||||
|
|
||||||
|
File file = fs.open(path, FILE_APPEND);
|
||||||
|
if(!file){
|
||||||
|
Serial.println("Failed to open file for appending");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
if(file.print(message)){
|
||||||
|
Serial.println("Message appended");
|
||||||
|
} else {
|
||||||
|
Serial.println("Append failed");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void writeFile(fs::FS &fs, const char * path, const char * message){
|
||||||
|
Serial.printf("Writing file: %s\n", path);
|
||||||
|
|
||||||
|
File file = fs.open(path, FILE_WRITE);
|
||||||
|
if(!file){
|
||||||
|
Serial.println("Failed to open file for writing");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
if(file.print(message)){
|
||||||
|
Serial.println("File written");
|
||||||
|
} else {
|
||||||
|
Serial.println("Write failed");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void sdwrite()
|
||||||
|
{
|
||||||
|
Serial.print("Detect SD\n");
|
||||||
|
if(SD_MMC.begin()){
|
||||||
|
|
||||||
|
|
||||||
|
uint8_t cardType = SD_MMC.cardType();
|
||||||
|
|
||||||
|
if(cardType != CARD_NONE){
|
||||||
|
|
||||||
|
|
||||||
|
Serial.print("SD_MMC Card Type: ");
|
||||||
|
if(cardType == CARD_MMC){
|
||||||
|
Serial.println("MMC");
|
||||||
|
} else if(cardType == CARD_SD){
|
||||||
|
Serial.println("SDSC");
|
||||||
|
} else if(cardType == CARD_SDHC){
|
||||||
|
Serial.println("SDHC");
|
||||||
|
} else {
|
||||||
|
Serial.println("UNKNOWN");
|
||||||
|
}
|
||||||
|
|
||||||
|
uint64_t cardSize = SD_MMC.cardSize() / (1024 * 1024);
|
||||||
|
Serial.printf("SD_MMC Card Size: %lluMB\n", cardSize);
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
Serial.printf("Total space: %lluMB\n", SD_MMC.totalBytes() / (1024 * 1024));
|
||||||
|
Serial.printf("Used space: %lluMB\n", SD_MMC.usedBytes() / (1024 * 1024));
|
||||||
|
*/
|
||||||
|
if (sonde.si()->validPos) {
|
||||||
|
char buff[20];
|
||||||
|
char chemin[40];
|
||||||
|
//String repertoire="/radiosonde/", name=sonde.si()->ser;
|
||||||
|
//repertoire.toCharArray(chemin, 40);
|
||||||
|
//if (!SD_MMC.exists(chemin)) {
|
||||||
|
createDir(SD_MMC, "/radiosonde/");
|
||||||
|
Serial.printf("\nWrite Rep\n");
|
||||||
|
//listDir(SD_MMC, chemin, 0);
|
||||||
|
//}
|
||||||
|
|
||||||
|
//if (name.length()>8) {
|
||||||
|
//name.concat(".csv");
|
||||||
|
//repertoire.concat(name);
|
||||||
|
//repertoire.toCharArray(chemin, 40);
|
||||||
|
writeFile(SD_MMC, "/radiosonde/sonde.csv", "");
|
||||||
|
Serial.printf("\nWrite file\n");
|
||||||
|
//if (!SD_MMC.exists(chemin)) {
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", "RadioSonde N; Ser ; Type ; Freq ; Alt ; VSpeed ; HSpeed ; Dir ; LaunchSite ; RSSI\n");
|
||||||
|
Serial.printf("\nWrite titre\n");
|
||||||
|
//}
|
||||||
|
Serial.printf("\nWrite Data\n");
|
||||||
|
snprintf(buff, 16, "%10c", sonde.si()->id);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", buff);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", ";");
|
||||||
|
snprintf(buff, 16, "%12c", sonde.si()->ser);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", buff);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", ";");
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", sondeTypeStr[sonde.si()->type]);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", ";");
|
||||||
|
snprintf(buff, 16, "%3.3fMhz", sonde.si()->freq);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", buff);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", ";");
|
||||||
|
snprintf(buff, 16, sonde.si()->alt>=1000?" %5.0fm":" %3.1fm", sonde.si()->alt);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", buff);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", ";");
|
||||||
|
snprintf(buff, 16, "%2.2fm/s", sonde.si()->vs);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", buff);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", ";");
|
||||||
|
snprintf(buff, 16, "%2.2fm/s", sonde.si()->hs);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", buff);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", ";");
|
||||||
|
snprintf(buff, 16, "%3.0f°", sonde.si()->dir);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", buff);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", ";");
|
||||||
|
snprintf(buff, 16, "%18c", sonde.si()->launchsite);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", buff);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", ";");
|
||||||
|
snprintf(buff, 16, "%d", sonde.si()->rssi);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", buff);
|
||||||
|
appendFile(SD_MMC, "/radiosonde/sonde.csv", "\n");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
227
libraries/fonts/FreeMono12pt7b.h
Executable file
227
libraries/fonts/FreeMono12pt7b.h
Executable file
|
|
@ -0,0 +1,227 @@
|
||||||
|
const uint8_t FreeMono12pt7bBitmaps[] PROGMEM = {
|
||||||
|
0x49, 0x24, 0x92, 0x48, 0x01, 0xF8, 0xE7, 0xE7, 0x67, 0x42, 0x42, 0x42,
|
||||||
|
0x42, 0x09, 0x02, 0x41, 0x10, 0x44, 0x11, 0x1F, 0xF1, 0x10, 0x4C, 0x12,
|
||||||
|
0x3F, 0xE1, 0x20, 0x48, 0x12, 0x04, 0x81, 0x20, 0x48, 0x04, 0x07, 0xA2,
|
||||||
|
0x19, 0x02, 0x40, 0x10, 0x03, 0x00, 0x3C, 0x00, 0x80, 0x10, 0x06, 0x01,
|
||||||
|
0xE0, 0xA7, 0xC0, 0x40, 0x10, 0x04, 0x00, 0x3C, 0x19, 0x84, 0x21, 0x08,
|
||||||
|
0x66, 0x0F, 0x00, 0x0C, 0x1C, 0x78, 0x01, 0xE0, 0xCC, 0x21, 0x08, 0x43,
|
||||||
|
0x30, 0x78, 0x3E, 0x30, 0x10, 0x08, 0x02, 0x03, 0x03, 0x47, 0x14, 0x8A,
|
||||||
|
0x43, 0x11, 0x8F, 0x60, 0xFD, 0xA4, 0x90, 0x05, 0x25, 0x24, 0x92, 0x48,
|
||||||
|
0x92, 0x24, 0x11, 0x24, 0x89, 0x24, 0x92, 0x92, 0x90, 0x00, 0x04, 0x02,
|
||||||
|
0x11, 0x07, 0xF0, 0xC0, 0x50, 0x48, 0x42, 0x00, 0x08, 0x04, 0x02, 0x01,
|
||||||
|
0x00, 0x87, 0xFC, 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, 0x3B, 0x9C, 0xCE,
|
||||||
|
0x62, 0x00, 0xFF, 0xE0, 0xFF, 0x80, 0x00, 0x80, 0xC0, 0x40, 0x20, 0x20,
|
||||||
|
0x10, 0x10, 0x08, 0x08, 0x04, 0x04, 0x02, 0x02, 0x01, 0x01, 0x00, 0x80,
|
||||||
|
0x80, 0x40, 0x00, 0x1C, 0x31, 0x90, 0x58, 0x38, 0x0C, 0x06, 0x03, 0x01,
|
||||||
|
0x80, 0xC0, 0x60, 0x30, 0x34, 0x13, 0x18, 0x70, 0x30, 0xE1, 0x44, 0x81,
|
||||||
|
0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x81, 0x1F, 0xC0, 0x1E, 0x10, 0x90,
|
||||||
|
0x68, 0x10, 0x08, 0x0C, 0x04, 0x04, 0x04, 0x06, 0x06, 0x06, 0x06, 0x0E,
|
||||||
|
0x07, 0xFE, 0x3E, 0x10, 0x40, 0x08, 0x02, 0x00, 0x80, 0x40, 0xE0, 0x04,
|
||||||
|
0x00, 0x80, 0x10, 0x04, 0x01, 0x00, 0xD8, 0x63, 0xE0, 0x06, 0x0A, 0x0A,
|
||||||
|
0x12, 0x22, 0x22, 0x42, 0x42, 0x82, 0x82, 0xFF, 0x02, 0x02, 0x02, 0x0F,
|
||||||
|
0x7F, 0x20, 0x10, 0x08, 0x04, 0x02, 0xF1, 0x8C, 0x03, 0x00, 0x80, 0x40,
|
||||||
|
0x20, 0x18, 0x16, 0x18, 0xF0, 0x0F, 0x8C, 0x08, 0x08, 0x04, 0x04, 0x02,
|
||||||
|
0x79, 0x46, 0xC1, 0xE0, 0x60, 0x28, 0x14, 0x19, 0x08, 0x78, 0xFF, 0x81,
|
||||||
|
0x81, 0x02, 0x02, 0x02, 0x02, 0x04, 0x04, 0x04, 0x04, 0x08, 0x08, 0x08,
|
||||||
|
0x08, 0x3E, 0x31, 0xB0, 0x70, 0x18, 0x0C, 0x05, 0x8C, 0x38, 0x63, 0x40,
|
||||||
|
0x60, 0x30, 0x18, 0x1B, 0x18, 0xF8, 0x3C, 0x31, 0x30, 0x50, 0x28, 0x0C,
|
||||||
|
0x0F, 0x06, 0x85, 0x3C, 0x80, 0x40, 0x40, 0x20, 0x20, 0x63, 0xE0, 0xFF,
|
||||||
|
0x80, 0x07, 0xFC, 0x39, 0xCE, 0x00, 0x00, 0x06, 0x33, 0x98, 0xC4, 0x00,
|
||||||
|
0x00, 0xC0, 0x60, 0x18, 0x0C, 0x06, 0x01, 0x80, 0x0C, 0x00, 0x60, 0x03,
|
||||||
|
0x00, 0x30, 0x01, 0x00, 0xFF, 0xF0, 0x00, 0x00, 0x0F, 0xFF, 0xC0, 0x06,
|
||||||
|
0x00, 0x30, 0x01, 0x80, 0x18, 0x01, 0x80, 0xC0, 0x30, 0x18, 0x0C, 0x02,
|
||||||
|
0x00, 0x00, 0x3E, 0x60, 0xA0, 0x20, 0x10, 0x08, 0x08, 0x18, 0x10, 0x08,
|
||||||
|
0x00, 0x00, 0x00, 0x01, 0xC0, 0xE0, 0x1C, 0x31, 0x10, 0x50, 0x28, 0x14,
|
||||||
|
0x3A, 0x25, 0x22, 0x91, 0x4C, 0xA3, 0xF0, 0x08, 0x02, 0x01, 0x80, 0x7C,
|
||||||
|
0x3F, 0x00, 0x0C, 0x00, 0x48, 0x01, 0x20, 0x04, 0x40, 0x21, 0x00, 0x84,
|
||||||
|
0x04, 0x08, 0x1F, 0xE0, 0x40, 0x82, 0x01, 0x08, 0x04, 0x20, 0x13, 0xE1,
|
||||||
|
0xF0, 0xFF, 0x08, 0x11, 0x01, 0x20, 0x24, 0x04, 0x81, 0x1F, 0xC2, 0x06,
|
||||||
|
0x40, 0x68, 0x05, 0x00, 0xA0, 0x14, 0x05, 0xFF, 0x00, 0x1E, 0x48, 0x74,
|
||||||
|
0x05, 0x01, 0x80, 0x20, 0x08, 0x02, 0x00, 0x80, 0x20, 0x04, 0x01, 0x01,
|
||||||
|
0x30, 0x87, 0xC0, 0xFE, 0x10, 0x44, 0x09, 0x02, 0x40, 0x50, 0x14, 0x05,
|
||||||
|
0x01, 0x40, 0x50, 0x14, 0x0D, 0x02, 0x41, 0x3F, 0x80, 0xFF, 0xC8, 0x09,
|
||||||
|
0x01, 0x20, 0x04, 0x00, 0x88, 0x1F, 0x02, 0x20, 0x40, 0x08, 0x01, 0x00,
|
||||||
|
0xA0, 0x14, 0x03, 0xFF, 0xC0, 0xFF, 0xE8, 0x05, 0x00, 0xA0, 0x04, 0x00,
|
||||||
|
0x88, 0x1F, 0x02, 0x20, 0x40, 0x08, 0x01, 0x00, 0x20, 0x04, 0x01, 0xF0,
|
||||||
|
0x00, 0x1F, 0x46, 0x19, 0x01, 0x60, 0x28, 0x01, 0x00, 0x20, 0x04, 0x00,
|
||||||
|
0x83, 0xF0, 0x0B, 0x01, 0x20, 0x23, 0x0C, 0x3E, 0x00, 0xE1, 0xD0, 0x24,
|
||||||
|
0x09, 0x02, 0x40, 0x90, 0x27, 0xF9, 0x02, 0x40, 0x90, 0x24, 0x09, 0x02,
|
||||||
|
0x40, 0xB8, 0x70, 0xFE, 0x20, 0x40, 0x81, 0x02, 0x04, 0x08, 0x10, 0x20,
|
||||||
|
0x40, 0x81, 0x1F, 0xC0, 0x0F, 0xE0, 0x10, 0x02, 0x00, 0x40, 0x08, 0x01,
|
||||||
|
0x00, 0x20, 0x04, 0x80, 0x90, 0x12, 0x02, 0x40, 0xC6, 0x30, 0x7C, 0x00,
|
||||||
|
0xF1, 0xE4, 0x0C, 0x41, 0x04, 0x20, 0x44, 0x04, 0x80, 0x5C, 0x06, 0x60,
|
||||||
|
0x43, 0x04, 0x10, 0x40, 0x84, 0x08, 0x40, 0xCF, 0x07, 0xF8, 0x04, 0x00,
|
||||||
|
0x80, 0x10, 0x02, 0x00, 0x40, 0x08, 0x01, 0x00, 0x20, 0x04, 0x04, 0x80,
|
||||||
|
0x90, 0x12, 0x03, 0xFF, 0xC0, 0xE0, 0x3B, 0x01, 0x94, 0x14, 0xA0, 0xA4,
|
||||||
|
0x89, 0x24, 0x49, 0x14, 0x48, 0xA2, 0x45, 0x12, 0x10, 0x90, 0x04, 0x80,
|
||||||
|
0x24, 0x01, 0x78, 0x3C, 0xE0, 0xF6, 0x02, 0x50, 0x25, 0x02, 0x48, 0x24,
|
||||||
|
0xC2, 0x44, 0x24, 0x22, 0x43, 0x24, 0x12, 0x40, 0xA4, 0x0A, 0x40, 0x6F,
|
||||||
|
0x06, 0x0F, 0x03, 0x0C, 0x60, 0x64, 0x02, 0x80, 0x18, 0x01, 0x80, 0x18,
|
||||||
|
0x01, 0x80, 0x18, 0x01, 0x40, 0x26, 0x06, 0x30, 0xC0, 0xF0, 0xFF, 0x10,
|
||||||
|
0x64, 0x05, 0x01, 0x40, 0x50, 0x34, 0x19, 0xFC, 0x40, 0x10, 0x04, 0x01,
|
||||||
|
0x00, 0x40, 0x3E, 0x00, 0x0F, 0x03, 0x0C, 0x60, 0x64, 0x02, 0x80, 0x18,
|
||||||
|
0x01, 0x80, 0x18, 0x01, 0x80, 0x18, 0x01, 0x40, 0x26, 0x06, 0x30, 0xC1,
|
||||||
|
0xF0, 0x0C, 0x01, 0xF1, 0x30, 0xE0, 0xFF, 0x04, 0x18, 0x40, 0xC4, 0x04,
|
||||||
|
0x40, 0x44, 0x0C, 0x41, 0x87, 0xE0, 0x43, 0x04, 0x10, 0x40, 0x84, 0x04,
|
||||||
|
0x40, 0x4F, 0x03, 0x1F, 0x48, 0x34, 0x05, 0x01, 0x40, 0x08, 0x01, 0xC0,
|
||||||
|
0x0E, 0x00, 0x40, 0x18, 0x06, 0x01, 0xE1, 0xA7, 0xC0, 0xFF, 0xF0, 0x86,
|
||||||
|
0x10, 0x82, 0x00, 0x40, 0x08, 0x01, 0x00, 0x20, 0x04, 0x00, 0x80, 0x10,
|
||||||
|
0x02, 0x00, 0x40, 0x7F, 0x00, 0xF0, 0xF4, 0x02, 0x40, 0x24, 0x02, 0x40,
|
||||||
|
0x24, 0x02, 0x40, 0x24, 0x02, 0x40, 0x24, 0x02, 0x40, 0x22, 0x04, 0x30,
|
||||||
|
0xC0, 0xF0, 0xF8, 0x7C, 0x80, 0x22, 0x01, 0x04, 0x04, 0x10, 0x20, 0x40,
|
||||||
|
0x80, 0x82, 0x02, 0x10, 0x08, 0x40, 0x11, 0x00, 0x48, 0x01, 0xA0, 0x03,
|
||||||
|
0x00, 0x0C, 0x00, 0xF8, 0x7C, 0x80, 0x22, 0x00, 0x88, 0xC2, 0x23, 0x10,
|
||||||
|
0x8E, 0x42, 0x29, 0x09, 0x24, 0x24, 0x90, 0x91, 0x41, 0x85, 0x06, 0x14,
|
||||||
|
0x18, 0x70, 0x60, 0x80, 0xF0, 0xF2, 0x06, 0x30, 0x41, 0x08, 0x09, 0x80,
|
||||||
|
0x50, 0x06, 0x00, 0x60, 0x0D, 0x00, 0x88, 0x10, 0xC2, 0x04, 0x60, 0x2F,
|
||||||
|
0x0F, 0xF0, 0xF2, 0x02, 0x10, 0x41, 0x04, 0x08, 0x80, 0x50, 0x05, 0x00,
|
||||||
|
0x20, 0x02, 0x00, 0x20, 0x02, 0x00, 0x20, 0x02, 0x01, 0xFC, 0xFF, 0x40,
|
||||||
|
0xA0, 0x90, 0x40, 0x40, 0x40, 0x20, 0x20, 0x20, 0x10, 0x50, 0x30, 0x18,
|
||||||
|
0x0F, 0xFC, 0xF2, 0x49, 0x24, 0x92, 0x49, 0x24, 0x9C, 0x80, 0x60, 0x10,
|
||||||
|
0x08, 0x02, 0x01, 0x00, 0x40, 0x20, 0x08, 0x04, 0x01, 0x00, 0x80, 0x20,
|
||||||
|
0x10, 0x04, 0x02, 0x00, 0x80, 0x40, 0xE4, 0x92, 0x49, 0x24, 0x92, 0x49,
|
||||||
|
0x3C, 0x08, 0x0C, 0x09, 0x0C, 0x4C, 0x14, 0x04, 0xFF, 0xFC, 0x84, 0x21,
|
||||||
|
0x3E, 0x00, 0x60, 0x08, 0x02, 0x3F, 0x98, 0x28, 0x0A, 0x02, 0xC3, 0x9F,
|
||||||
|
0x30, 0xE0, 0x01, 0x00, 0x08, 0x00, 0x40, 0x02, 0x00, 0x13, 0xE0, 0xA0,
|
||||||
|
0x86, 0x02, 0x20, 0x09, 0x00, 0x48, 0x02, 0x40, 0x13, 0x01, 0x14, 0x1B,
|
||||||
|
0x9F, 0x00, 0x1F, 0x4C, 0x19, 0x01, 0x40, 0x28, 0x01, 0x00, 0x20, 0x02,
|
||||||
|
0x00, 0x60, 0x43, 0xF0, 0x00, 0xC0, 0x08, 0x01, 0x00, 0x20, 0x04, 0x3C,
|
||||||
|
0x98, 0x52, 0x06, 0x80, 0x50, 0x0A, 0x01, 0x40, 0x24, 0x0C, 0xC2, 0x87,
|
||||||
|
0x98, 0x3F, 0x18, 0x68, 0x06, 0x01, 0xFF, 0xE0, 0x08, 0x03, 0x00, 0x60,
|
||||||
|
0xC7, 0xC0, 0x0F, 0x98, 0x08, 0x04, 0x02, 0x07, 0xF8, 0x80, 0x40, 0x20,
|
||||||
|
0x10, 0x08, 0x04, 0x02, 0x01, 0x03, 0xF8, 0x1E, 0x6C, 0x39, 0x03, 0x40,
|
||||||
|
0x28, 0x05, 0x00, 0xA0, 0x12, 0x06, 0x61, 0x43, 0xC8, 0x01, 0x00, 0x20,
|
||||||
|
0x08, 0x3E, 0x00, 0xC0, 0x10, 0x04, 0x01, 0x00, 0x40, 0x13, 0x87, 0x11,
|
||||||
|
0x82, 0x40, 0x90, 0x24, 0x09, 0x02, 0x40, 0x90, 0x2E, 0x1C, 0x08, 0x04,
|
||||||
|
0x02, 0x00, 0x00, 0x03, 0xC0, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01, 0x00,
|
||||||
|
0x80, 0x43, 0xFE, 0x04, 0x08, 0x10, 0x00, 0x1F, 0xC0, 0x81, 0x02, 0x04,
|
||||||
|
0x08, 0x10, 0x20, 0x40, 0x81, 0x02, 0x0B, 0xE0, 0xE0, 0x02, 0x00, 0x20,
|
||||||
|
0x02, 0x00, 0x20, 0x02, 0x3C, 0x21, 0x02, 0x60, 0x2C, 0x03, 0x80, 0x24,
|
||||||
|
0x02, 0x20, 0x21, 0x02, 0x08, 0xE1, 0xF0, 0x78, 0x04, 0x02, 0x01, 0x00,
|
||||||
|
0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01, 0x00, 0x80, 0x43, 0xFE,
|
||||||
|
0xDC, 0xE3, 0x19, 0x90, 0x84, 0x84, 0x24, 0x21, 0x21, 0x09, 0x08, 0x48,
|
||||||
|
0x42, 0x42, 0x17, 0x18, 0xC0, 0x67, 0x83, 0x84, 0x20, 0x22, 0x02, 0x20,
|
||||||
|
0x22, 0x02, 0x20, 0x22, 0x02, 0x20, 0x2F, 0x07, 0x1F, 0x04, 0x11, 0x01,
|
||||||
|
0x40, 0x18, 0x03, 0x00, 0x60, 0x0A, 0x02, 0x20, 0x83, 0xE0, 0xCF, 0x85,
|
||||||
|
0x06, 0x60, 0x24, 0x01, 0x40, 0x14, 0x01, 0x40, 0x16, 0x02, 0x50, 0x44,
|
||||||
|
0xF8, 0x40, 0x04, 0x00, 0x40, 0x0F, 0x00, 0x1E, 0x6C, 0x3B, 0x03, 0x40,
|
||||||
|
0x28, 0x05, 0x00, 0xA0, 0x12, 0x06, 0x61, 0x43, 0xC8, 0x01, 0x00, 0x20,
|
||||||
|
0x04, 0x03, 0xC0, 0xE3, 0x8B, 0x13, 0x80, 0x80, 0x20, 0x08, 0x02, 0x00,
|
||||||
|
0x80, 0x20, 0x3F, 0x80, 0x1F, 0x58, 0x34, 0x05, 0x80, 0x1E, 0x00, 0x60,
|
||||||
|
0x06, 0x01, 0xC0, 0xAF, 0xC0, 0x20, 0x04, 0x00, 0x80, 0x10, 0x0F, 0xF0,
|
||||||
|
0x40, 0x08, 0x01, 0x00, 0x20, 0x04, 0x00, 0x80, 0x10, 0x03, 0x04, 0x3F,
|
||||||
|
0x00, 0xC1, 0xC8, 0x09, 0x01, 0x20, 0x24, 0x04, 0x80, 0x90, 0x12, 0x02,
|
||||||
|
0x61, 0xC7, 0xCC, 0xF8, 0xF9, 0x01, 0x08, 0x10, 0x60, 0x81, 0x08, 0x08,
|
||||||
|
0x40, 0x22, 0x01, 0x20, 0x05, 0x00, 0x30, 0x00, 0xF0, 0x7A, 0x01, 0x10,
|
||||||
|
0x08, 0x8C, 0x42, 0x62, 0x12, 0x90, 0xA5, 0x05, 0x18, 0x28, 0xC0, 0x86,
|
||||||
|
0x00, 0x78, 0xF3, 0x04, 0x18, 0x80, 0xD0, 0x06, 0x00, 0x70, 0x09, 0x81,
|
||||||
|
0x0C, 0x20, 0x6F, 0x8F, 0xF0, 0xF2, 0x02, 0x20, 0x41, 0x04, 0x10, 0x80,
|
||||||
|
0x88, 0x09, 0x00, 0x50, 0x06, 0x00, 0x20, 0x04, 0x00, 0x40, 0x08, 0x0F,
|
||||||
|
0xE0, 0xFF, 0x41, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x40, 0xBF,
|
||||||
|
0xC0, 0x19, 0x08, 0x42, 0x10, 0x84, 0x64, 0x18, 0x42, 0x10, 0x84, 0x20,
|
||||||
|
0xC0, 0xFF, 0xFF, 0xC0, 0xC1, 0x08, 0x42, 0x10, 0x84, 0x10, 0x4C, 0x42,
|
||||||
|
0x10, 0x84, 0x26, 0x00, 0x38, 0x13, 0x38, 0x38 };
|
||||||
|
|
||||||
|
const GFXglyph FreeMono12pt7bGlyphs[] PROGMEM = {
|
||||||
|
{ 0, 0, 0, 14, 0, 1 }, // 0x20 ' '
|
||||||
|
{ 0, 3, 15, 14, 6, -14 }, // 0x21 '!'
|
||||||
|
{ 6, 8, 7, 14, 3, -14 }, // 0x22 '"'
|
||||||
|
{ 13, 10, 16, 14, 2, -14 }, // 0x23 '#'
|
||||||
|
{ 33, 10, 17, 14, 2, -14 }, // 0x24 '$'
|
||||||
|
{ 55, 10, 15, 14, 2, -14 }, // 0x25 '%'
|
||||||
|
{ 74, 9, 12, 14, 3, -11 }, // 0x26 '&'
|
||||||
|
{ 88, 3, 7, 14, 5, -14 }, // 0x27 '''
|
||||||
|
{ 91, 3, 18, 14, 7, -14 }, // 0x28 '('
|
||||||
|
{ 98, 3, 18, 14, 4, -14 }, // 0x29 ')'
|
||||||
|
{ 105, 9, 9, 14, 3, -14 }, // 0x2A '*'
|
||||||
|
{ 116, 9, 11, 14, 3, -11 }, // 0x2B '+'
|
||||||
|
{ 129, 5, 7, 14, 3, -3 }, // 0x2C ','
|
||||||
|
{ 134, 11, 1, 14, 2, -6 }, // 0x2D '-'
|
||||||
|
{ 136, 3, 3, 14, 5, -2 }, // 0x2E '.'
|
||||||
|
{ 138, 9, 18, 14, 3, -15 }, // 0x2F '/'
|
||||||
|
{ 159, 9, 15, 14, 3, -14 }, // 0x30 '0'
|
||||||
|
{ 176, 7, 14, 14, 4, -13 }, // 0x31 '1'
|
||||||
|
{ 189, 9, 15, 14, 2, -14 }, // 0x32 '2'
|
||||||
|
{ 206, 10, 15, 14, 2, -14 }, // 0x33 '3'
|
||||||
|
{ 225, 8, 15, 14, 3, -14 }, // 0x34 '4'
|
||||||
|
{ 240, 9, 15, 14, 3, -14 }, // 0x35 '5'
|
||||||
|
{ 257, 9, 15, 14, 3, -14 }, // 0x36 '6'
|
||||||
|
{ 274, 8, 15, 14, 3, -14 }, // 0x37 '7'
|
||||||
|
{ 289, 9, 15, 14, 3, -14 }, // 0x38 '8'
|
||||||
|
{ 306, 9, 15, 14, 3, -14 }, // 0x39 '9'
|
||||||
|
{ 323, 3, 10, 14, 5, -9 }, // 0x3A ':'
|
||||||
|
{ 327, 5, 13, 14, 3, -9 }, // 0x3B ';'
|
||||||
|
{ 336, 11, 11, 14, 2, -11 }, // 0x3C '<'
|
||||||
|
{ 352, 12, 4, 14, 1, -8 }, // 0x3D '='
|
||||||
|
{ 358, 11, 11, 14, 2, -11 }, // 0x3E '>'
|
||||||
|
{ 374, 9, 14, 14, 3, -13 }, // 0x3F '?'
|
||||||
|
{ 390, 9, 16, 14, 3, -14 }, // 0x40 '@'
|
||||||
|
{ 408, 14, 14, 14, 0, -13 }, // 0x41 'A'
|
||||||
|
{ 433, 11, 14, 14, 2, -13 }, // 0x42 'B'
|
||||||
|
{ 453, 10, 14, 14, 2, -13 }, // 0x43 'C'
|
||||||
|
{ 471, 10, 14, 14, 2, -13 }, // 0x44 'D'
|
||||||
|
{ 489, 11, 14, 14, 2, -13 }, // 0x45 'E'
|
||||||
|
{ 509, 11, 14, 14, 2, -13 }, // 0x46 'F'
|
||||||
|
{ 529, 11, 14, 14, 2, -13 }, // 0x47 'G'
|
||||||
|
{ 549, 10, 14, 14, 2, -13 }, // 0x48 'H'
|
||||||
|
{ 567, 7, 14, 14, 4, -13 }, // 0x49 'I'
|
||||||
|
{ 580, 11, 14, 14, 2, -13 }, // 0x4A 'J'
|
||||||
|
{ 600, 12, 14, 14, 2, -13 }, // 0x4B 'K'
|
||||||
|
{ 621, 11, 14, 14, 2, -13 }, // 0x4C 'L'
|
||||||
|
{ 641, 13, 14, 14, 1, -13 }, // 0x4D 'M'
|
||||||
|
{ 664, 12, 14, 14, 1, -13 }, // 0x4E 'N'
|
||||||
|
{ 685, 12, 14, 14, 1, -13 }, // 0x4F 'O'
|
||||||
|
{ 706, 10, 14, 14, 2, -13 }, // 0x50 'P'
|
||||||
|
{ 724, 12, 17, 14, 1, -13 }, // 0x51 'Q'
|
||||||
|
{ 750, 12, 14, 14, 2, -13 }, // 0x52 'R'
|
||||||
|
{ 771, 10, 14, 14, 2, -13 }, // 0x53 'S'
|
||||||
|
{ 789, 11, 14, 14, 2, -13 }, // 0x54 'T'
|
||||||
|
{ 809, 12, 14, 14, 1, -13 }, // 0x55 'U'
|
||||||
|
{ 830, 14, 14, 14, 0, -13 }, // 0x56 'V'
|
||||||
|
{ 855, 14, 14, 14, 0, -13 }, // 0x57 'W'
|
||||||
|
{ 880, 12, 14, 14, 1, -13 }, // 0x58 'X'
|
||||||
|
{ 901, 12, 14, 14, 1, -13 }, // 0x59 'Y'
|
||||||
|
{ 922, 9, 14, 14, 3, -13 }, // 0x5A 'Z'
|
||||||
|
{ 938, 3, 18, 14, 7, -14 }, // 0x5B '['
|
||||||
|
{ 945, 9, 18, 14, 3, -15 }, // 0x5C '\'
|
||||||
|
{ 966, 3, 18, 14, 5, -14 }, // 0x5D ']'
|
||||||
|
{ 973, 9, 6, 14, 3, -14 }, // 0x5E '^'
|
||||||
|
{ 980, 14, 1, 14, 0, 3 }, // 0x5F '_'
|
||||||
|
{ 982, 4, 4, 14, 4, -15 }, // 0x60 '`'
|
||||||
|
{ 984, 10, 10, 14, 2, -9 }, // 0x61 'a'
|
||||||
|
{ 997, 13, 15, 14, 0, -14 }, // 0x62 'b'
|
||||||
|
{ 1022, 11, 10, 14, 2, -9 }, // 0x63 'c'
|
||||||
|
{ 1036, 11, 15, 14, 2, -14 }, // 0x64 'd'
|
||||||
|
{ 1057, 10, 10, 14, 2, -9 }, // 0x65 'e'
|
||||||
|
{ 1070, 9, 15, 14, 4, -14 }, // 0x66 'f'
|
||||||
|
{ 1087, 11, 14, 14, 2, -9 }, // 0x67 'g'
|
||||||
|
{ 1107, 10, 15, 14, 2, -14 }, // 0x68 'h'
|
||||||
|
{ 1126, 9, 15, 14, 3, -14 }, // 0x69 'i'
|
||||||
|
{ 1143, 7, 19, 14, 3, -14 }, // 0x6A 'j'
|
||||||
|
{ 1160, 12, 15, 14, 1, -14 }, // 0x6B 'k'
|
||||||
|
{ 1183, 9, 15, 14, 3, -14 }, // 0x6C 'l'
|
||||||
|
{ 1200, 13, 10, 14, 1, -9 }, // 0x6D 'm'
|
||||||
|
{ 1217, 12, 10, 14, 1, -9 }, // 0x6E 'n'
|
||||||
|
{ 1232, 11, 10, 14, 2, -9 }, // 0x6F 'o'
|
||||||
|
{ 1246, 12, 14, 14, 1, -9 }, // 0x70 'p'
|
||||||
|
{ 1267, 11, 14, 14, 2, -9 }, // 0x71 'q'
|
||||||
|
{ 1287, 10, 10, 14, 3, -9 }, // 0x72 'r'
|
||||||
|
{ 1300, 10, 10, 14, 2, -9 }, // 0x73 's'
|
||||||
|
{ 1313, 11, 14, 14, 1, -13 }, // 0x74 't'
|
||||||
|
{ 1333, 11, 10, 14, 2, -9 }, // 0x75 'u'
|
||||||
|
{ 1347, 13, 10, 14, 1, -9 }, // 0x76 'v'
|
||||||
|
{ 1364, 13, 10, 14, 1, -9 }, // 0x77 'w'
|
||||||
|
{ 1381, 12, 10, 14, 1, -9 }, // 0x78 'x'
|
||||||
|
{ 1396, 12, 14, 14, 1, -9 }, // 0x79 'y'
|
||||||
|
{ 1417, 9, 10, 14, 3, -9 }, // 0x7A 'z'
|
||||||
|
{ 1429, 5, 18, 14, 5, -14 }, // 0x7B '{'
|
||||||
|
{ 1441, 1, 18, 14, 7, -14 }, // 0x7C '|'
|
||||||
|
{ 1444, 5, 18, 14, 5, -14 }, // 0x7D '}'
|
||||||
|
{ 1456, 10, 3, 14, 2, -7 } }; // 0x7E '~'
|
||||||
|
|
||||||
|
const GFXfont FreeMono12pt7b PROGMEM = {
|
||||||
|
(uint8_t *)FreeMono12pt7bBitmaps,
|
||||||
|
(GFXglyph *)FreeMono12pt7bGlyphs,
|
||||||
|
0x20, 0x7E, 24 };
|
||||||
|
|
||||||
|
// Approx. 2132 bytes
|
||||||
176
libraries/fonts/FreeMono9pt7b.h
Executable file
176
libraries/fonts/FreeMono9pt7b.h
Executable file
|
|
@ -0,0 +1,176 @@
|
||||||
|
const uint8_t FreeMono9pt7bBitmaps[] PROGMEM = {
|
||||||
|
0xAA, 0xA8, 0x0C, 0xED, 0x24, 0x92, 0x48, 0x24, 0x48, 0x91, 0x2F, 0xE4,
|
||||||
|
0x89, 0x7F, 0x28, 0x51, 0x22, 0x40, 0x08, 0x3E, 0x62, 0x40, 0x30, 0x0E,
|
||||||
|
0x01, 0x81, 0xC3, 0xBE, 0x08, 0x08, 0x71, 0x12, 0x23, 0x80, 0x23, 0xB8,
|
||||||
|
0x0E, 0x22, 0x44, 0x70, 0x38, 0x81, 0x02, 0x06, 0x1A, 0x65, 0x46, 0xC8,
|
||||||
|
0xEC, 0xE9, 0x24, 0x5A, 0xAA, 0xA9, 0x40, 0xA9, 0x55, 0x5A, 0x80, 0x10,
|
||||||
|
0x22, 0x4B, 0xE3, 0x05, 0x11, 0x00, 0x10, 0x20, 0x47, 0xF1, 0x02, 0x04,
|
||||||
|
0x00, 0x6B, 0x48, 0xFF, 0x00, 0xF0, 0x02, 0x08, 0x10, 0x60, 0x81, 0x04,
|
||||||
|
0x08, 0x20, 0x41, 0x02, 0x08, 0x00, 0x38, 0x8A, 0x0C, 0x18, 0x30, 0x60,
|
||||||
|
0xC1, 0x82, 0x88, 0xE0, 0x27, 0x28, 0x42, 0x10, 0x84, 0x21, 0x3E, 0x38,
|
||||||
|
0x8A, 0x08, 0x10, 0x20, 0x82, 0x08, 0x61, 0x03, 0xF8, 0x7C, 0x06, 0x02,
|
||||||
|
0x02, 0x1C, 0x06, 0x01, 0x01, 0x01, 0x42, 0x3C, 0x18, 0xA2, 0x92, 0x8A,
|
||||||
|
0x28, 0xBF, 0x08, 0x21, 0xC0, 0x7C, 0x81, 0x03, 0xE4, 0x40, 0x40, 0x81,
|
||||||
|
0x03, 0x88, 0xE0, 0x1E, 0x41, 0x04, 0x0B, 0x98, 0xB0, 0xC1, 0xC2, 0x88,
|
||||||
|
0xE0, 0xFE, 0x04, 0x08, 0x20, 0x40, 0x82, 0x04, 0x08, 0x20, 0x40, 0x38,
|
||||||
|
0x8A, 0x0C, 0x14, 0x47, 0x11, 0x41, 0x83, 0x8C, 0xE0, 0x38, 0x8A, 0x1C,
|
||||||
|
0x18, 0x68, 0xCE, 0x81, 0x04, 0x13, 0xC0, 0xF0, 0x0F, 0x6C, 0x00, 0xD2,
|
||||||
|
0xD2, 0x00, 0x03, 0x04, 0x18, 0x60, 0x60, 0x18, 0x04, 0x03, 0xFF, 0x80,
|
||||||
|
0x00, 0x1F, 0xF0, 0x40, 0x18, 0x03, 0x00, 0x60, 0x20, 0x60, 0xC0, 0x80,
|
||||||
|
0x3D, 0x84, 0x08, 0x30, 0xC2, 0x00, 0x00, 0x00, 0x30, 0x3C, 0x46, 0x82,
|
||||||
|
0x8E, 0xB2, 0xA2, 0xA2, 0x9F, 0x80, 0x80, 0x40, 0x3C, 0x3C, 0x01, 0x40,
|
||||||
|
0x28, 0x09, 0x01, 0x10, 0x42, 0x0F, 0xC1, 0x04, 0x40, 0x9E, 0x3C, 0xFE,
|
||||||
|
0x21, 0x90, 0x48, 0x67, 0xE2, 0x09, 0x02, 0x81, 0x41, 0xFF, 0x80, 0x3E,
|
||||||
|
0xB0, 0xF0, 0x30, 0x08, 0x04, 0x02, 0x00, 0x80, 0x60, 0x8F, 0x80, 0xFE,
|
||||||
|
0x21, 0x90, 0x68, 0x14, 0x0A, 0x05, 0x02, 0x83, 0x43, 0x7F, 0x00, 0xFF,
|
||||||
|
0x20, 0x90, 0x08, 0x87, 0xC2, 0x21, 0x00, 0x81, 0x40, 0xFF, 0xC0, 0xFF,
|
||||||
|
0xA0, 0x50, 0x08, 0x87, 0xC2, 0x21, 0x00, 0x80, 0x40, 0x78, 0x00, 0x1E,
|
||||||
|
0x98, 0x6C, 0x0A, 0x00, 0x80, 0x20, 0xF8, 0x0B, 0x02, 0x60, 0x87, 0xC0,
|
||||||
|
0xE3, 0xA0, 0x90, 0x48, 0x27, 0xF2, 0x09, 0x04, 0x82, 0x41, 0x71, 0xC0,
|
||||||
|
0xF9, 0x08, 0x42, 0x10, 0x84, 0x27, 0xC0, 0x1F, 0x02, 0x02, 0x02, 0x02,
|
||||||
|
0x02, 0x82, 0x82, 0xC6, 0x78, 0xE3, 0xA1, 0x11, 0x09, 0x05, 0x83, 0x21,
|
||||||
|
0x08, 0x84, 0x41, 0x70, 0xC0, 0xE0, 0x40, 0x40, 0x40, 0x40, 0x40, 0x41,
|
||||||
|
0x41, 0x41, 0xFF, 0xE0, 0xEC, 0x19, 0x45, 0x28, 0xA4, 0xA4, 0x94, 0x91,
|
||||||
|
0x12, 0x02, 0x40, 0x5C, 0x1C, 0xC3, 0xB0, 0x94, 0x4A, 0x24, 0x92, 0x49,
|
||||||
|
0x14, 0x8A, 0x43, 0x70, 0x80, 0x1E, 0x31, 0x90, 0x50, 0x18, 0x0C, 0x06,
|
||||||
|
0x02, 0x82, 0x63, 0x0F, 0x00, 0xFE, 0x43, 0x41, 0x41, 0x42, 0x7C, 0x40,
|
||||||
|
0x40, 0x40, 0xF0, 0x1C, 0x31, 0x90, 0x50, 0x18, 0x0C, 0x06, 0x02, 0x82,
|
||||||
|
0x63, 0x1F, 0x04, 0x07, 0x92, 0x30, 0xFE, 0x21, 0x90, 0x48, 0x24, 0x23,
|
||||||
|
0xE1, 0x10, 0x84, 0x41, 0x70, 0xC0, 0x3A, 0xCD, 0x0A, 0x03, 0x01, 0x80,
|
||||||
|
0xC1, 0xC7, 0x78, 0xFF, 0xC4, 0x62, 0x21, 0x00, 0x80, 0x40, 0x20, 0x10,
|
||||||
|
0x08, 0x1F, 0x00, 0xE3, 0xA0, 0x90, 0x48, 0x24, 0x12, 0x09, 0x04, 0x82,
|
||||||
|
0x22, 0x0E, 0x00, 0xF1, 0xE8, 0x10, 0x82, 0x10, 0x42, 0x10, 0x22, 0x04,
|
||||||
|
0x80, 0x50, 0x0C, 0x00, 0x80, 0xF1, 0xE8, 0x09, 0x11, 0x25, 0x44, 0xA8,
|
||||||
|
0x55, 0x0C, 0xA1, 0x8C, 0x31, 0x84, 0x30, 0xE3, 0xA0, 0x88, 0x82, 0x80,
|
||||||
|
0x80, 0xC0, 0x90, 0x44, 0x41, 0x71, 0xC0, 0xE3, 0xA0, 0x88, 0x82, 0x81,
|
||||||
|
0x40, 0x40, 0x20, 0x10, 0x08, 0x1F, 0x00, 0xFD, 0x0A, 0x20, 0x81, 0x04,
|
||||||
|
0x10, 0x21, 0x83, 0xFC, 0xEA, 0xAA, 0xAA, 0xC0, 0x80, 0x81, 0x03, 0x02,
|
||||||
|
0x04, 0x04, 0x08, 0x08, 0x10, 0x10, 0x20, 0x20, 0xD5, 0x55, 0x55, 0xC0,
|
||||||
|
0x10, 0x51, 0x22, 0x28, 0x20, 0xFF, 0xE0, 0x88, 0x80, 0x7E, 0x00, 0x80,
|
||||||
|
0x47, 0xEC, 0x14, 0x0A, 0x0C, 0xFB, 0xC0, 0x20, 0x10, 0x0B, 0xC6, 0x12,
|
||||||
|
0x05, 0x02, 0x81, 0x40, 0xB0, 0xB7, 0x80, 0x3A, 0x8E, 0x0C, 0x08, 0x10,
|
||||||
|
0x10, 0x9E, 0x03, 0x00, 0x80, 0x47, 0xA4, 0x34, 0x0A, 0x05, 0x02, 0x81,
|
||||||
|
0x21, 0x8F, 0x60, 0x3C, 0x43, 0x81, 0xFF, 0x80, 0x80, 0x61, 0x3E, 0x3D,
|
||||||
|
0x04, 0x3E, 0x41, 0x04, 0x10, 0x41, 0x0F, 0x80, 0x3D, 0xA1, 0xA0, 0x50,
|
||||||
|
0x28, 0x14, 0x09, 0x0C, 0x7A, 0x01, 0x01, 0x87, 0x80, 0xC0, 0x20, 0x10,
|
||||||
|
0x0B, 0xC6, 0x32, 0x09, 0x04, 0x82, 0x41, 0x20, 0xB8, 0xE0, 0x10, 0x01,
|
||||||
|
0xC0, 0x81, 0x02, 0x04, 0x08, 0x11, 0xFC, 0x10, 0x3E, 0x10, 0x84, 0x21,
|
||||||
|
0x08, 0x42, 0x3F, 0x00, 0xC0, 0x40, 0x40, 0x4F, 0x44, 0x58, 0x70, 0x48,
|
||||||
|
0x44, 0x42, 0xC7, 0x70, 0x20, 0x40, 0x81, 0x02, 0x04, 0x08, 0x10, 0x23,
|
||||||
|
0xF8, 0xB7, 0x64, 0x62, 0x31, 0x18, 0x8C, 0x46, 0x23, 0x91, 0x5E, 0x31,
|
||||||
|
0x90, 0x48, 0x24, 0x12, 0x09, 0x05, 0xC7, 0x3E, 0x31, 0xA0, 0x30, 0x18,
|
||||||
|
0x0C, 0x05, 0x8C, 0x7C, 0xDE, 0x30, 0x90, 0x28, 0x14, 0x0A, 0x05, 0x84,
|
||||||
|
0xBC, 0x40, 0x20, 0x38, 0x00, 0x3D, 0xA1, 0xA0, 0x50, 0x28, 0x14, 0x09,
|
||||||
|
0x0C, 0x7A, 0x01, 0x00, 0x80, 0xE0, 0xCE, 0xA1, 0x82, 0x04, 0x08, 0x10,
|
||||||
|
0x7C, 0x3A, 0x8D, 0x0B, 0x80, 0xF0, 0x70, 0xDE, 0x40, 0x40, 0xFC, 0x40,
|
||||||
|
0x40, 0x40, 0x40, 0x40, 0x41, 0x3E, 0xC3, 0x41, 0x41, 0x41, 0x41, 0x41,
|
||||||
|
0x43, 0x3D, 0xE3, 0xA0, 0x90, 0x84, 0x42, 0x20, 0xA0, 0x50, 0x10, 0xE3,
|
||||||
|
0xC0, 0x92, 0x4B, 0x25, 0x92, 0xA9, 0x98, 0x44, 0xE3, 0x31, 0x05, 0x01,
|
||||||
|
0x01, 0x41, 0x11, 0x05, 0xC7, 0xE3, 0xA0, 0x90, 0x84, 0x42, 0x40, 0xA0,
|
||||||
|
0x60, 0x10, 0x10, 0x08, 0x3E, 0x00, 0xFD, 0x08, 0x20, 0x82, 0x08, 0x10,
|
||||||
|
0xBF, 0x29, 0x24, 0xA2, 0x49, 0x26, 0xFF, 0xF8, 0x89, 0x24, 0x8A, 0x49,
|
||||||
|
0x2C, 0x61, 0x24, 0x30 };
|
||||||
|
|
||||||
|
const GFXglyph FreeMono9pt7bGlyphs[] PROGMEM = {
|
||||||
|
{ 0, 0, 0, 11, 0, 1 }, // 0x20 ' '
|
||||||
|
{ 0, 2, 11, 11, 4, -10 }, // 0x21 '!'
|
||||||
|
{ 3, 6, 5, 11, 2, -10 }, // 0x22 '"'
|
||||||
|
{ 7, 7, 12, 11, 2, -10 }, // 0x23 '#'
|
||||||
|
{ 18, 8, 12, 11, 1, -10 }, // 0x24 '$'
|
||||||
|
{ 30, 7, 11, 11, 2, -10 }, // 0x25 '%'
|
||||||
|
{ 40, 7, 10, 11, 2, -9 }, // 0x26 '&'
|
||||||
|
{ 49, 3, 5, 11, 4, -10 }, // 0x27 '''
|
||||||
|
{ 51, 2, 13, 11, 5, -10 }, // 0x28 '('
|
||||||
|
{ 55, 2, 13, 11, 4, -10 }, // 0x29 ')'
|
||||||
|
{ 59, 7, 7, 11, 2, -10 }, // 0x2A '*'
|
||||||
|
{ 66, 7, 7, 11, 2, -8 }, // 0x2B '+'
|
||||||
|
{ 73, 3, 5, 11, 2, -1 }, // 0x2C ','
|
||||||
|
{ 75, 9, 1, 11, 1, -5 }, // 0x2D '-'
|
||||||
|
{ 77, 2, 2, 11, 4, -1 }, // 0x2E '.'
|
||||||
|
{ 78, 7, 13, 11, 2, -11 }, // 0x2F '/'
|
||||||
|
{ 90, 7, 11, 11, 2, -10 }, // 0x30 '0'
|
||||||
|
{ 100, 5, 11, 11, 3, -10 }, // 0x31 '1'
|
||||||
|
{ 107, 7, 11, 11, 2, -10 }, // 0x32 '2'
|
||||||
|
{ 117, 8, 11, 11, 1, -10 }, // 0x33 '3'
|
||||||
|
{ 128, 6, 11, 11, 3, -10 }, // 0x34 '4'
|
||||||
|
{ 137, 7, 11, 11, 2, -10 }, // 0x35 '5'
|
||||||
|
{ 147, 7, 11, 11, 2, -10 }, // 0x36 '6'
|
||||||
|
{ 157, 7, 11, 11, 2, -10 }, // 0x37 '7'
|
||||||
|
{ 167, 7, 11, 11, 2, -10 }, // 0x38 '8'
|
||||||
|
{ 177, 7, 11, 11, 2, -10 }, // 0x39 '9'
|
||||||
|
{ 187, 2, 8, 11, 4, -7 }, // 0x3A ':'
|
||||||
|
{ 189, 3, 11, 11, 3, -7 }, // 0x3B ';'
|
||||||
|
{ 194, 8, 8, 11, 1, -8 }, // 0x3C '<'
|
||||||
|
{ 202, 9, 4, 11, 1, -6 }, // 0x3D '='
|
||||||
|
{ 207, 9, 8, 11, 1, -8 }, // 0x3E '>'
|
||||||
|
{ 216, 7, 10, 11, 2, -9 }, // 0x3F '?'
|
||||||
|
{ 225, 8, 12, 11, 2, -10 }, // 0x40 '@'
|
||||||
|
{ 237, 11, 10, 11, 0, -9 }, // 0x41 'A'
|
||||||
|
{ 251, 9, 10, 11, 1, -9 }, // 0x42 'B'
|
||||||
|
{ 263, 9, 10, 11, 1, -9 }, // 0x43 'C'
|
||||||
|
{ 275, 9, 10, 11, 1, -9 }, // 0x44 'D'
|
||||||
|
{ 287, 9, 10, 11, 1, -9 }, // 0x45 'E'
|
||||||
|
{ 299, 9, 10, 11, 1, -9 }, // 0x46 'F'
|
||||||
|
{ 311, 10, 10, 11, 1, -9 }, // 0x47 'G'
|
||||||
|
{ 324, 9, 10, 11, 1, -9 }, // 0x48 'H'
|
||||||
|
{ 336, 5, 10, 11, 3, -9 }, // 0x49 'I'
|
||||||
|
{ 343, 8, 10, 11, 2, -9 }, // 0x4A 'J'
|
||||||
|
{ 353, 9, 10, 11, 1, -9 }, // 0x4B 'K'
|
||||||
|
{ 365, 8, 10, 11, 2, -9 }, // 0x4C 'L'
|
||||||
|
{ 375, 11, 10, 11, 0, -9 }, // 0x4D 'M'
|
||||||
|
{ 389, 9, 10, 11, 1, -9 }, // 0x4E 'N'
|
||||||
|
{ 401, 9, 10, 11, 1, -9 }, // 0x4F 'O'
|
||||||
|
{ 413, 8, 10, 11, 1, -9 }, // 0x50 'P'
|
||||||
|
{ 423, 9, 13, 11, 1, -9 }, // 0x51 'Q'
|
||||||
|
{ 438, 9, 10, 11, 1, -9 }, // 0x52 'R'
|
||||||
|
{ 450, 7, 10, 11, 2, -9 }, // 0x53 'S'
|
||||||
|
{ 459, 9, 10, 11, 1, -9 }, // 0x54 'T'
|
||||||
|
{ 471, 9, 10, 11, 1, -9 }, // 0x55 'U'
|
||||||
|
{ 483, 11, 10, 11, 0, -9 }, // 0x56 'V'
|
||||||
|
{ 497, 11, 10, 11, 0, -9 }, // 0x57 'W'
|
||||||
|
{ 511, 9, 10, 11, 1, -9 }, // 0x58 'X'
|
||||||
|
{ 523, 9, 10, 11, 1, -9 }, // 0x59 'Y'
|
||||||
|
{ 535, 7, 10, 11, 2, -9 }, // 0x5A 'Z'
|
||||||
|
{ 544, 2, 13, 11, 5, -10 }, // 0x5B '['
|
||||||
|
{ 548, 7, 13, 11, 2, -11 }, // 0x5C '\'
|
||||||
|
{ 560, 2, 13, 11, 4, -10 }, // 0x5D ']'
|
||||||
|
{ 564, 7, 5, 11, 2, -10 }, // 0x5E '^'
|
||||||
|
{ 569, 11, 1, 11, 0, 2 }, // 0x5F '_'
|
||||||
|
{ 571, 3, 3, 11, 3, -11 }, // 0x60 '`'
|
||||||
|
{ 573, 9, 8, 11, 1, -7 }, // 0x61 'a'
|
||||||
|
{ 582, 9, 11, 11, 1, -10 }, // 0x62 'b'
|
||||||
|
{ 595, 7, 8, 11, 2, -7 }, // 0x63 'c'
|
||||||
|
{ 602, 9, 11, 11, 1, -10 }, // 0x64 'd'
|
||||||
|
{ 615, 8, 8, 11, 1, -7 }, // 0x65 'e'
|
||||||
|
{ 623, 6, 11, 11, 3, -10 }, // 0x66 'f'
|
||||||
|
{ 632, 9, 11, 11, 1, -7 }, // 0x67 'g'
|
||||||
|
{ 645, 9, 11, 11, 1, -10 }, // 0x68 'h'
|
||||||
|
{ 658, 7, 10, 11, 2, -9 }, // 0x69 'i'
|
||||||
|
{ 667, 5, 13, 11, 3, -9 }, // 0x6A 'j'
|
||||||
|
{ 676, 8, 11, 11, 2, -10 }, // 0x6B 'k'
|
||||||
|
{ 687, 7, 11, 11, 2, -10 }, // 0x6C 'l'
|
||||||
|
{ 697, 9, 8, 11, 1, -7 }, // 0x6D 'm'
|
||||||
|
{ 706, 9, 8, 11, 1, -7 }, // 0x6E 'n'
|
||||||
|
{ 715, 9, 8, 11, 1, -7 }, // 0x6F 'o'
|
||||||
|
{ 724, 9, 11, 11, 1, -7 }, // 0x70 'p'
|
||||||
|
{ 737, 9, 11, 11, 1, -7 }, // 0x71 'q'
|
||||||
|
{ 750, 7, 8, 11, 3, -7 }, // 0x72 'r'
|
||||||
|
{ 757, 7, 8, 11, 2, -7 }, // 0x73 's'
|
||||||
|
{ 764, 8, 10, 11, 2, -9 }, // 0x74 't'
|
||||||
|
{ 774, 8, 8, 11, 1, -7 }, // 0x75 'u'
|
||||||
|
{ 782, 9, 8, 11, 1, -7 }, // 0x76 'v'
|
||||||
|
{ 791, 9, 8, 11, 1, -7 }, // 0x77 'w'
|
||||||
|
{ 800, 9, 8, 11, 1, -7 }, // 0x78 'x'
|
||||||
|
{ 809, 9, 11, 11, 1, -7 }, // 0x79 'y'
|
||||||
|
{ 822, 7, 8, 11, 2, -7 }, // 0x7A 'z'
|
||||||
|
{ 829, 3, 13, 11, 4, -10 }, // 0x7B '{'
|
||||||
|
{ 834, 1, 13, 11, 5, -10 }, // 0x7C '|'
|
||||||
|
{ 836, 3, 13, 11, 4, -10 }, // 0x7D '}'
|
||||||
|
{ 841, 7, 3, 11, 2, -6 } }; // 0x7E '~'
|
||||||
|
|
||||||
|
const GFXfont FreeMono9pt7b PROGMEM = {
|
||||||
|
(uint8_t *)FreeMono9pt7bBitmaps,
|
||||||
|
(GFXglyph *)FreeMono9pt7bGlyphs,
|
||||||
|
0x20, 0x7E, 18 };
|
||||||
|
|
||||||
|
// Approx. 1516 bytes
|
||||||
270
libraries/fonts/FreeSans12pt7b.h
Executable file
270
libraries/fonts/FreeSans12pt7b.h
Executable file
|
|
@ -0,0 +1,270 @@
|
||||||
|
const uint8_t FreeSans12pt7bBitmaps[] PROGMEM = {
|
||||||
|
0xFF, 0xFF, 0xFF, 0xF0, 0xF0, 0xCF, 0x3C, 0xF3, 0x8A, 0x20, 0x06, 0x30,
|
||||||
|
0x31, 0x03, 0x18, 0x18, 0xC7, 0xFF, 0xBF, 0xFC, 0x31, 0x03, 0x18, 0x18,
|
||||||
|
0xC7, 0xFF, 0xBF, 0xFC, 0x31, 0x01, 0x18, 0x18, 0xC0, 0xC6, 0x06, 0x30,
|
||||||
|
0x04, 0x03, 0xE1, 0xFF, 0x72, 0x6C, 0x47, 0x88, 0xF1, 0x07, 0x20, 0x7E,
|
||||||
|
0x03, 0xF0, 0x17, 0x02, 0x3C, 0x47, 0x88, 0xF1, 0x1B, 0x26, 0x7F, 0xC3,
|
||||||
|
0xE0, 0x10, 0x02, 0x00, 0x00, 0x06, 0x03, 0xC0, 0x40, 0x7E, 0x0C, 0x0E,
|
||||||
|
0x70, 0x80, 0xC3, 0x18, 0x0C, 0x31, 0x00, 0xE7, 0x30, 0x07, 0xE6, 0x00,
|
||||||
|
0x3C, 0x40, 0x00, 0x0C, 0x7C, 0x00, 0x8F, 0xE0, 0x19, 0xC7, 0x01, 0x18,
|
||||||
|
0x30, 0x31, 0x83, 0x02, 0x1C, 0x70, 0x40, 0xFE, 0x04, 0x07, 0xC0, 0x0F,
|
||||||
|
0x00, 0x7E, 0x03, 0x9C, 0x0C, 0x30, 0x30, 0xC0, 0xE7, 0x01, 0xF8, 0x03,
|
||||||
|
0x80, 0x3E, 0x01, 0xCC, 0x6E, 0x19, 0xB0, 0x7C, 0xC0, 0xF3, 0x03, 0xCE,
|
||||||
|
0x1F, 0x9F, 0xE6, 0x1E, 0x1C, 0xFF, 0xA0, 0x08, 0x8C, 0x66, 0x31, 0x98,
|
||||||
|
0xC6, 0x31, 0x8C, 0x63, 0x08, 0x63, 0x08, 0x61, 0x0C, 0x20, 0x82, 0x18,
|
||||||
|
0xC3, 0x18, 0xC3, 0x18, 0xC6, 0x31, 0x8C, 0x62, 0x31, 0x88, 0xC4, 0x62,
|
||||||
|
0x00, 0x10, 0x23, 0x5B, 0xE3, 0x8D, 0x91, 0x00, 0x0C, 0x03, 0x00, 0xC0,
|
||||||
|
0x30, 0xFF, 0xFF, 0xF0, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0xF5, 0x60,
|
||||||
|
0xFF, 0xF0, 0xF0, 0x02, 0x0C, 0x10, 0x20, 0xC1, 0x02, 0x0C, 0x10, 0x20,
|
||||||
|
0xC1, 0x02, 0x0C, 0x10, 0x20, 0xC1, 0x00, 0x1F, 0x07, 0xF1, 0xC7, 0x30,
|
||||||
|
0x6E, 0x0F, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3C,
|
||||||
|
0x0E, 0xC1, 0x9C, 0x71, 0xFC, 0x1F, 0x00, 0x08, 0xCF, 0xFF, 0x8C, 0x63,
|
||||||
|
0x18, 0xC6, 0x31, 0x8C, 0x63, 0x18, 0x1F, 0x0F, 0xF9, 0x87, 0x60, 0x7C,
|
||||||
|
0x06, 0x00, 0xC0, 0x18, 0x07, 0x01, 0xC0, 0xF0, 0x78, 0x1C, 0x06, 0x00,
|
||||||
|
0x80, 0x30, 0x07, 0xFF, 0xFF, 0xE0, 0x3F, 0x0F, 0xF3, 0x87, 0x60, 0x6C,
|
||||||
|
0x0C, 0x01, 0x80, 0x70, 0x7C, 0x0F, 0x80, 0x18, 0x01, 0x80, 0x3C, 0x07,
|
||||||
|
0x80, 0xD8, 0x73, 0xFC, 0x1F, 0x00, 0x01, 0x80, 0x70, 0x0E, 0x03, 0xC0,
|
||||||
|
0xD8, 0x1B, 0x06, 0x61, 0x8C, 0x21, 0x8C, 0x33, 0x06, 0x7F, 0xFF, 0xFE,
|
||||||
|
0x03, 0x00, 0x60, 0x0C, 0x01, 0x80, 0x3F, 0xCF, 0xF9, 0x80, 0x30, 0x06,
|
||||||
|
0x00, 0xDE, 0x1F, 0xE7, 0x0E, 0x00, 0xE0, 0x0C, 0x01, 0x80, 0x30, 0x07,
|
||||||
|
0x81, 0xF8, 0x73, 0xFC, 0x1F, 0x00, 0x0F, 0x07, 0xF9, 0xC3, 0x30, 0x74,
|
||||||
|
0x01, 0x80, 0x33, 0xC7, 0xFE, 0xF0, 0xDC, 0x1F, 0x01, 0xE0, 0x3C, 0x06,
|
||||||
|
0xC1, 0xDC, 0x71, 0xFC, 0x1F, 0x00, 0xFF, 0xFF, 0xFC, 0x01, 0x00, 0x60,
|
||||||
|
0x18, 0x02, 0x00, 0xC0, 0x30, 0x06, 0x01, 0x80, 0x30, 0x04, 0x01, 0x80,
|
||||||
|
0x30, 0x06, 0x01, 0x80, 0x30, 0x00, 0x1F, 0x07, 0xF1, 0xC7, 0x30, 0x66,
|
||||||
|
0x0C, 0xC1, 0x8C, 0x61, 0xFC, 0x3F, 0x8E, 0x3B, 0x01, 0xE0, 0x3C, 0x07,
|
||||||
|
0x80, 0xD8, 0x31, 0xFC, 0x1F, 0x00, 0x1F, 0x07, 0xF1, 0xC7, 0x70, 0x6C,
|
||||||
|
0x07, 0x80, 0xF0, 0x1E, 0x07, 0x61, 0xEF, 0xFC, 0x79, 0x80, 0x30, 0x05,
|
||||||
|
0x81, 0x98, 0x73, 0xFC, 0x1E, 0x00, 0xF0, 0x00, 0x03, 0xC0, 0xF0, 0x00,
|
||||||
|
0x0F, 0x56, 0x00, 0x00, 0x07, 0x01, 0xE0, 0xF8, 0x3C, 0x0F, 0x00, 0xE0,
|
||||||
|
0x07, 0xC0, 0x0F, 0x00, 0x3C, 0x00, 0xF0, 0x01, 0xFF, 0xFF, 0xFF, 0x00,
|
||||||
|
0x00, 0x00, 0xFF, 0xFF, 0xFF, 0x00, 0x0E, 0x00, 0x78, 0x01, 0xF0, 0x07,
|
||||||
|
0xC0, 0x0F, 0x00, 0x70, 0x1E, 0x0F, 0x03, 0xC0, 0xF0, 0x08, 0x00, 0x1F,
|
||||||
|
0x1F, 0xEE, 0x1B, 0x03, 0xC0, 0xC0, 0x30, 0x0C, 0x06, 0x03, 0x81, 0xC0,
|
||||||
|
0xE0, 0x30, 0x0C, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x03, 0x00, 0x00, 0xFE,
|
||||||
|
0x00, 0x0F, 0xFE, 0x00, 0xF0, 0x3E, 0x07, 0x00, 0x3C, 0x38, 0x00, 0x30,
|
||||||
|
0xC1, 0xE0, 0x66, 0x0F, 0xD9, 0xD8, 0x61, 0xC3, 0xC3, 0x07, 0x0F, 0x1C,
|
||||||
|
0x1C, 0x3C, 0x60, 0x60, 0xF1, 0x81, 0x83, 0xC6, 0x06, 0x1B, 0x18, 0x38,
|
||||||
|
0xEE, 0x71, 0xE7, 0x18, 0xFD, 0xF8, 0x71, 0xE7, 0xC0, 0xE0, 0x00, 0x01,
|
||||||
|
0xE0, 0x00, 0x01, 0xFF, 0xC0, 0x01, 0xFC, 0x00, 0x03, 0xC0, 0x03, 0xC0,
|
||||||
|
0x03, 0xC0, 0x07, 0xE0, 0x06, 0x60, 0x06, 0x60, 0x0E, 0x70, 0x0C, 0x30,
|
||||||
|
0x0C, 0x30, 0x1C, 0x38, 0x18, 0x18, 0x1F, 0xF8, 0x3F, 0xFC, 0x30, 0x1C,
|
||||||
|
0x30, 0x0C, 0x70, 0x0E, 0x60, 0x06, 0x60, 0x06, 0xFF, 0xC7, 0xFF, 0x30,
|
||||||
|
0x19, 0x80, 0x6C, 0x03, 0x60, 0x1B, 0x00, 0xD8, 0x0C, 0xFF, 0xC7, 0xFF,
|
||||||
|
0x30, 0x0D, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00, 0x78, 0x06, 0xFF, 0xF7,
|
||||||
|
0xFE, 0x00, 0x07, 0xE0, 0x3F, 0xF0, 0xE0, 0x73, 0x80, 0x66, 0x00, 0x6C,
|
||||||
|
0x00, 0x30, 0x00, 0x60, 0x00, 0xC0, 0x01, 0x80, 0x03, 0x00, 0x06, 0x00,
|
||||||
|
0x06, 0x00, 0x6C, 0x00, 0xDC, 0x03, 0x1E, 0x0E, 0x1F, 0xF8, 0x0F, 0xC0,
|
||||||
|
0xFF, 0x83, 0xFF, 0x8C, 0x07, 0x30, 0x0E, 0xC0, 0x1B, 0x00, 0x7C, 0x00,
|
||||||
|
0xF0, 0x03, 0xC0, 0x0F, 0x00, 0x3C, 0x00, 0xF0, 0x03, 0xC0, 0x1F, 0x00,
|
||||||
|
0x6C, 0x03, 0xB0, 0x1C, 0xFF, 0xE3, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, 0xC0,
|
||||||
|
0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xFF, 0xEF, 0xFE, 0xC0,
|
||||||
|
0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||||
|
0xFF, 0xFF, 0x00, 0x60, 0x0C, 0x01, 0x80, 0x30, 0x06, 0x00, 0xFF, 0xDF,
|
||||||
|
0xFB, 0x00, 0x60, 0x0C, 0x01, 0x80, 0x30, 0x06, 0x00, 0xC0, 0x18, 0x00,
|
||||||
|
0x07, 0xF0, 0x1F, 0xFC, 0x3C, 0x1E, 0x70, 0x06, 0x60, 0x03, 0xE0, 0x00,
|
||||||
|
0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x7F, 0xC0, 0x7F, 0xC0, 0x03, 0xC0, 0x03,
|
||||||
|
0x60, 0x03, 0x60, 0x07, 0x30, 0x0F, 0x3C, 0x1F, 0x1F, 0xFB, 0x07, 0xE1,
|
||||||
|
0xC0, 0x1E, 0x00, 0xF0, 0x07, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00, 0x78,
|
||||||
|
0x03, 0xFF, 0xFF, 0xFF, 0xF0, 0x07, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00,
|
||||||
|
0x78, 0x03, 0xC0, 0x1E, 0x00, 0xC0, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0x01,
|
||||||
|
0x80, 0xC0, 0x60, 0x30, 0x18, 0x0C, 0x06, 0x03, 0x01, 0x80, 0xC0, 0x60,
|
||||||
|
0x3C, 0x1E, 0x0F, 0x07, 0xC7, 0x7F, 0x1F, 0x00, 0xC0, 0x3B, 0x01, 0xCC,
|
||||||
|
0x0E, 0x30, 0x70, 0xC3, 0x83, 0x1C, 0x0C, 0xE0, 0x33, 0x80, 0xDE, 0x03,
|
||||||
|
0xDC, 0x0E, 0x38, 0x30, 0x60, 0xC1, 0xC3, 0x03, 0x8C, 0x06, 0x30, 0x1C,
|
||||||
|
0xC0, 0x3B, 0x00, 0x60, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x0C,
|
||||||
|
0x03, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00,
|
||||||
|
0xFF, 0xFF, 0xF0, 0xE0, 0x07, 0xE0, 0x07, 0xF0, 0x0F, 0xF0, 0x0F, 0xD0,
|
||||||
|
0x0F, 0xD8, 0x1B, 0xD8, 0x1B, 0xD8, 0x1B, 0xCC, 0x33, 0xCC, 0x33, 0xCC,
|
||||||
|
0x33, 0xC6, 0x63, 0xC6, 0x63, 0xC6, 0x63, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
|
||||||
|
0xC3, 0xC1, 0x83, 0xE0, 0x1F, 0x00, 0xFC, 0x07, 0xE0, 0x3D, 0x81, 0xEE,
|
||||||
|
0x0F, 0x30, 0x79, 0xC3, 0xC6, 0x1E, 0x18, 0xF0, 0xE7, 0x83, 0x3C, 0x1D,
|
||||||
|
0xE0, 0x6F, 0x01, 0xF8, 0x0F, 0xC0, 0x3E, 0x01, 0xC0, 0x03, 0xE0, 0x0F,
|
||||||
|
0xFC, 0x0F, 0x07, 0x86, 0x00, 0xC6, 0x00, 0x33, 0x00, 0x1B, 0x00, 0x07,
|
||||||
|
0x80, 0x03, 0xC0, 0x01, 0xE0, 0x00, 0xF0, 0x00, 0x78, 0x00, 0x36, 0x00,
|
||||||
|
0x33, 0x00, 0x18, 0xC0, 0x18, 0x78, 0x3C, 0x1F, 0xFC, 0x03, 0xF8, 0x00,
|
||||||
|
0xFF, 0x8F, 0xFE, 0xC0, 0x6C, 0x03, 0xC0, 0x3C, 0x03, 0xC0, 0x3C, 0x07,
|
||||||
|
0xFF, 0xEF, 0xFC, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00,
|
||||||
|
0xC0, 0x0C, 0x00, 0x03, 0xE0, 0x0F, 0xFC, 0x0F, 0x07, 0x86, 0x00, 0xC6,
|
||||||
|
0x00, 0x33, 0x00, 0x1B, 0x00, 0x07, 0x80, 0x03, 0xC0, 0x01, 0xE0, 0x00,
|
||||||
|
0xF0, 0x00, 0x78, 0x00, 0x36, 0x00, 0x33, 0x01, 0x98, 0xC0, 0xFC, 0x78,
|
||||||
|
0x3C, 0x1F, 0xFF, 0x03, 0xF9, 0x80, 0x00, 0x40, 0xFF, 0xC3, 0xFF, 0xCC,
|
||||||
|
0x03, 0xB0, 0x06, 0xC0, 0x1B, 0x00, 0x6C, 0x01, 0xB0, 0x0C, 0xFF, 0xE3,
|
||||||
|
0xFF, 0xCC, 0x03, 0xB0, 0x06, 0xC0, 0x1B, 0x00, 0x6C, 0x01, 0xB0, 0x06,
|
||||||
|
0xC0, 0x1B, 0x00, 0x70, 0x0F, 0xE0, 0x7F, 0xC3, 0x83, 0x9C, 0x07, 0x60,
|
||||||
|
0x0D, 0x80, 0x06, 0x00, 0x1E, 0x00, 0x3F, 0x80, 0x3F, 0xC0, 0x0F, 0x80,
|
||||||
|
0x07, 0xC0, 0x0F, 0x00, 0x3E, 0x00, 0xDE, 0x0E, 0x3F, 0xF0, 0x3F, 0x80,
|
||||||
|
0xFF, 0xFF, 0xFF, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60,
|
||||||
|
0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60,
|
||||||
|
0x06, 0x00, 0x60, 0xC0, 0x1E, 0x00, 0xF0, 0x07, 0x80, 0x3C, 0x01, 0xE0,
|
||||||
|
0x0F, 0x00, 0x78, 0x03, 0xC0, 0x1E, 0x00, 0xF0, 0x07, 0x80, 0x3C, 0x01,
|
||||||
|
0xE0, 0x0F, 0x80, 0xEE, 0x0E, 0x3F, 0xE0, 0x7C, 0x00, 0x60, 0x06, 0xC0,
|
||||||
|
0x1D, 0xC0, 0x31, 0x80, 0x63, 0x01, 0xC7, 0x03, 0x06, 0x06, 0x0C, 0x1C,
|
||||||
|
0x1C, 0x30, 0x18, 0x60, 0x31, 0xC0, 0x73, 0x00, 0x66, 0x00, 0xDC, 0x01,
|
||||||
|
0xF0, 0x01, 0xE0, 0x03, 0xC0, 0x07, 0x00, 0xE0, 0x30, 0x1D, 0x80, 0xE0,
|
||||||
|
0x76, 0x07, 0x81, 0xD8, 0x1E, 0x06, 0x70, 0x7C, 0x18, 0xC1, 0xB0, 0xE3,
|
||||||
|
0x0C, 0xC3, 0x8C, 0x33, 0x0C, 0x38, 0xC6, 0x30, 0x67, 0x18, 0xC1, 0x98,
|
||||||
|
0x67, 0x06, 0x61, 0xD8, 0x1D, 0x83, 0x60, 0x3C, 0x0D, 0x80, 0xF0, 0x3E,
|
||||||
|
0x03, 0xC0, 0x70, 0x0F, 0x01, 0xC0, 0x18, 0x07, 0x00, 0x70, 0x0E, 0x60,
|
||||||
|
0x38, 0xE0, 0x60, 0xE1, 0xC0, 0xC3, 0x01, 0xCC, 0x01, 0xF8, 0x01, 0xE0,
|
||||||
|
0x03, 0x80, 0x07, 0x80, 0x1F, 0x00, 0x33, 0x00, 0xE7, 0x03, 0x86, 0x06,
|
||||||
|
0x0E, 0x1C, 0x0E, 0x70, 0x0C, 0xC0, 0x1C, 0x60, 0x06, 0x70, 0x0E, 0x30,
|
||||||
|
0x1C, 0x38, 0x18, 0x1C, 0x38, 0x0C, 0x30, 0x0E, 0x70, 0x06, 0x60, 0x03,
|
||||||
|
0xC0, 0x03, 0xC0, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01,
|
||||||
|
0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0xFF, 0xFF, 0xFF, 0xC0, 0x0E,
|
||||||
|
0x00, 0xE0, 0x0E, 0x00, 0x60, 0x07, 0x00, 0x70, 0x07, 0x00, 0x30, 0x03,
|
||||||
|
0x80, 0x38, 0x03, 0x80, 0x18, 0x01, 0xC0, 0x1C, 0x00, 0xFF, 0xFF, 0xFF,
|
||||||
|
0xC0, 0xFF, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCF,
|
||||||
|
0xF0, 0x81, 0x81, 0x02, 0x06, 0x04, 0x08, 0x18, 0x10, 0x20, 0x60, 0x40,
|
||||||
|
0x81, 0x81, 0x02, 0x06, 0x04, 0xFF, 0x33, 0x33, 0x33, 0x33, 0x33, 0x33,
|
||||||
|
0x33, 0x33, 0x33, 0x3F, 0xF0, 0x0C, 0x0E, 0x05, 0x86, 0xC3, 0x21, 0x19,
|
||||||
|
0x8C, 0x83, 0xC1, 0x80, 0xFF, 0xFE, 0xE3, 0x8C, 0x30, 0x3F, 0x07, 0xF8,
|
||||||
|
0xE1, 0xCC, 0x0C, 0x00, 0xC0, 0x1C, 0x3F, 0xCF, 0x8C, 0xC0, 0xCC, 0x0C,
|
||||||
|
0xE3, 0xC7, 0xEF, 0x3C, 0x70, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xC0,
|
||||||
|
0x0C, 0xF8, 0xDF, 0xCF, 0x0E, 0xE0, 0x7C, 0x03, 0xC0, 0x3C, 0x03, 0xC0,
|
||||||
|
0x3C, 0x03, 0xE0, 0x6F, 0x0E, 0xDF, 0xCC, 0xF8, 0x1F, 0x0F, 0xE7, 0x1B,
|
||||||
|
0x83, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x38, 0x37, 0x1C, 0xFE, 0x1F,
|
||||||
|
0x00, 0x00, 0x60, 0x0C, 0x01, 0x80, 0x30, 0x06, 0x3C, 0xCF, 0xFB, 0x8F,
|
||||||
|
0xE0, 0xF8, 0x0F, 0x01, 0xE0, 0x3C, 0x07, 0x80, 0xF8, 0x3B, 0x8F, 0x3F,
|
||||||
|
0x63, 0xCC, 0x1F, 0x07, 0xF1, 0xC7, 0x70, 0x3C, 0x07, 0xFF, 0xFF, 0xFE,
|
||||||
|
0x00, 0xC0, 0x1C, 0x0D, 0xC3, 0x1F, 0xE1, 0xF0, 0x3B, 0xD8, 0xC6, 0x7F,
|
||||||
|
0xEC, 0x63, 0x18, 0xC6, 0x31, 0x8C, 0x63, 0x00, 0x1E, 0x67, 0xFD, 0xC7,
|
||||||
|
0xF0, 0x7C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x7C, 0x1D, 0xC7, 0x9F,
|
||||||
|
0xB1, 0xE6, 0x00, 0xC0, 0x3E, 0x0E, 0x7F, 0xC7, 0xE0, 0xC0, 0x30, 0x0C,
|
||||||
|
0x03, 0x00, 0xC0, 0x33, 0xCD, 0xFB, 0xC7, 0xE0, 0xF0, 0x3C, 0x0F, 0x03,
|
||||||
|
0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x30, 0xF0, 0x3F, 0xFF, 0xFF,
|
||||||
|
0xF0, 0x33, 0x00, 0x03, 0x33, 0x33, 0x33, 0x33, 0x33, 0x33, 0x33, 0x3F,
|
||||||
|
0xE0, 0xC0, 0x18, 0x03, 0x00, 0x60, 0x0C, 0x01, 0x83, 0x30, 0xC6, 0x30,
|
||||||
|
0xCC, 0x1B, 0x83, 0xF0, 0x77, 0x0C, 0x61, 0x8E, 0x30, 0xE6, 0x0C, 0xC1,
|
||||||
|
0xD8, 0x18, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0xCF, 0x1F, 0x6F, 0xDF, 0xFC,
|
||||||
|
0x78, 0xFC, 0x18, 0x3C, 0x0C, 0x1E, 0x06, 0x0F, 0x03, 0x07, 0x81, 0x83,
|
||||||
|
0xC0, 0xC1, 0xE0, 0x60, 0xF0, 0x30, 0x78, 0x18, 0x3C, 0x0C, 0x18, 0xCF,
|
||||||
|
0x37, 0xEF, 0x1F, 0x83, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x3C,
|
||||||
|
0x0F, 0x03, 0xC0, 0xC0, 0x1F, 0x07, 0xF1, 0xC7, 0x70, 0x7C, 0x07, 0x80,
|
||||||
|
0xF0, 0x1E, 0x03, 0xC0, 0x7C, 0x1D, 0xC7, 0x1F, 0xC1, 0xF0, 0xCF, 0x8D,
|
||||||
|
0xFC, 0xF0, 0xEE, 0x06, 0xC0, 0x3C, 0x03, 0xC0, 0x3C, 0x03, 0xC0, 0x3E,
|
||||||
|
0x07, 0xF0, 0xEF, 0xFC, 0xCF, 0x8C, 0x00, 0xC0, 0x0C, 0x00, 0xC0, 0x00,
|
||||||
|
0x1E, 0x67, 0xFD, 0xC7, 0xF0, 0x7C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0,
|
||||||
|
0x7C, 0x1D, 0xC7, 0x9F, 0xF1, 0xE6, 0x00, 0xC0, 0x18, 0x03, 0x00, 0x60,
|
||||||
|
0xCF, 0x7F, 0x38, 0xC3, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC0, 0x3E, 0x1F,
|
||||||
|
0xEE, 0x1B, 0x00, 0xC0, 0x3C, 0x07, 0xF0, 0x3E, 0x01, 0xF0, 0x3E, 0x1D,
|
||||||
|
0xFE, 0x3E, 0x00, 0x63, 0x19, 0xFF, 0xB1, 0x8C, 0x63, 0x18, 0xC6, 0x31,
|
||||||
|
0xE7, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0,
|
||||||
|
0xF0, 0x7E, 0x3D, 0xFB, 0x3C, 0xC0, 0xE0, 0x66, 0x06, 0x60, 0x67, 0x0C,
|
||||||
|
0x30, 0xC3, 0x0C, 0x39, 0x81, 0x98, 0x19, 0x81, 0xF0, 0x0F, 0x00, 0xE0,
|
||||||
|
0x0E, 0x00, 0xC1, 0xC1, 0xB0, 0xE1, 0xD8, 0x70, 0xCC, 0x2C, 0x66, 0x36,
|
||||||
|
0x31, 0x9B, 0x18, 0xCD, 0x98, 0x64, 0x6C, 0x16, 0x36, 0x0F, 0x1A, 0x07,
|
||||||
|
0x8F, 0x03, 0x83, 0x80, 0xC1, 0xC0, 0x60, 0xEE, 0x18, 0xC6, 0x0C, 0xC1,
|
||||||
|
0xF0, 0x1C, 0x01, 0x80, 0x78, 0x1B, 0x03, 0x30, 0xC7, 0x30, 0x66, 0x06,
|
||||||
|
0xE0, 0x6C, 0x0D, 0x83, 0x38, 0x63, 0x0C, 0x63, 0x0E, 0x60, 0xCC, 0x1B,
|
||||||
|
0x03, 0x60, 0x3C, 0x07, 0x00, 0xE0, 0x18, 0x03, 0x00, 0xE0, 0x78, 0x0E,
|
||||||
|
0x00, 0xFF, 0xFF, 0xF0, 0x18, 0x0C, 0x07, 0x03, 0x81, 0xC0, 0x60, 0x30,
|
||||||
|
0x18, 0x0E, 0x03, 0xFF, 0xFF, 0xC0, 0x19, 0xCC, 0x63, 0x18, 0xC6, 0x31,
|
||||||
|
0x99, 0x86, 0x18, 0xC6, 0x31, 0x8C, 0x63, 0x1C, 0x60, 0xFF, 0xFF, 0xFF,
|
||||||
|
0xFF, 0xFF, 0xFC, 0xC7, 0x18, 0xC6, 0x31, 0x8C, 0x63, 0x0C, 0x33, 0x31,
|
||||||
|
0x8C, 0x63, 0x18, 0xC6, 0x73, 0x00, 0x70, 0x3E, 0x09, 0xE4, 0x1F, 0x03,
|
||||||
|
0x80 };
|
||||||
|
|
||||||
|
const GFXglyph FreeSans12pt7bGlyphs[] PROGMEM = {
|
||||||
|
{ 0, 0, 0, 6, 0, 1 }, // 0x20 ' '
|
||||||
|
{ 0, 2, 18, 8, 3, -17 }, // 0x21 '!'
|
||||||
|
{ 5, 6, 6, 8, 1, -16 }, // 0x22 '"'
|
||||||
|
{ 10, 13, 16, 13, 0, -15 }, // 0x23 '#'
|
||||||
|
{ 36, 11, 20, 13, 1, -17 }, // 0x24 '$'
|
||||||
|
{ 64, 20, 17, 21, 1, -16 }, // 0x25 '%'
|
||||||
|
{ 107, 14, 17, 16, 1, -16 }, // 0x26 '&'
|
||||||
|
{ 137, 2, 6, 5, 1, -16 }, // 0x27 '''
|
||||||
|
{ 139, 5, 23, 8, 2, -17 }, // 0x28 '('
|
||||||
|
{ 154, 5, 23, 8, 1, -17 }, // 0x29 ')'
|
||||||
|
{ 169, 7, 7, 9, 1, -17 }, // 0x2A '*'
|
||||||
|
{ 176, 10, 11, 14, 2, -10 }, // 0x2B '+'
|
||||||
|
{ 190, 2, 6, 7, 2, -1 }, // 0x2C ','
|
||||||
|
{ 192, 6, 2, 8, 1, -7 }, // 0x2D '-'
|
||||||
|
{ 194, 2, 2, 6, 2, -1 }, // 0x2E '.'
|
||||||
|
{ 195, 7, 18, 7, 0, -17 }, // 0x2F '/'
|
||||||
|
{ 211, 11, 17, 13, 1, -16 }, // 0x30 '0'
|
||||||
|
{ 235, 5, 17, 13, 3, -16 }, // 0x31 '1'
|
||||||
|
{ 246, 11, 17, 13, 1, -16 }, // 0x32 '2'
|
||||||
|
{ 270, 11, 17, 13, 1, -16 }, // 0x33 '3'
|
||||||
|
{ 294, 11, 17, 13, 1, -16 }, // 0x34 '4'
|
||||||
|
{ 318, 11, 17, 13, 1, -16 }, // 0x35 '5'
|
||||||
|
{ 342, 11, 17, 13, 1, -16 }, // 0x36 '6'
|
||||||
|
{ 366, 11, 17, 13, 1, -16 }, // 0x37 '7'
|
||||||
|
{ 390, 11, 17, 13, 1, -16 }, // 0x38 '8'
|
||||||
|
{ 414, 11, 17, 13, 1, -16 }, // 0x39 '9'
|
||||||
|
{ 438, 2, 13, 6, 2, -12 }, // 0x3A ':'
|
||||||
|
{ 442, 2, 16, 6, 2, -11 }, // 0x3B ';'
|
||||||
|
{ 446, 12, 12, 14, 1, -11 }, // 0x3C '<'
|
||||||
|
{ 464, 12, 6, 14, 1, -8 }, // 0x3D '='
|
||||||
|
{ 473, 12, 12, 14, 1, -11 }, // 0x3E '>'
|
||||||
|
{ 491, 10, 18, 13, 2, -17 }, // 0x3F '?'
|
||||||
|
{ 514, 22, 21, 24, 1, -17 }, // 0x40 '@'
|
||||||
|
{ 572, 16, 18, 16, 0, -17 }, // 0x41 'A'
|
||||||
|
{ 608, 13, 18, 16, 2, -17 }, // 0x42 'B'
|
||||||
|
{ 638, 15, 18, 17, 1, -17 }, // 0x43 'C'
|
||||||
|
{ 672, 14, 18, 17, 2, -17 }, // 0x44 'D'
|
||||||
|
{ 704, 12, 18, 15, 2, -17 }, // 0x45 'E'
|
||||||
|
{ 731, 11, 18, 14, 2, -17 }, // 0x46 'F'
|
||||||
|
{ 756, 16, 18, 18, 1, -17 }, // 0x47 'G'
|
||||||
|
{ 792, 13, 18, 17, 2, -17 }, // 0x48 'H'
|
||||||
|
{ 822, 2, 18, 7, 2, -17 }, // 0x49 'I'
|
||||||
|
{ 827, 9, 18, 13, 1, -17 }, // 0x4A 'J'
|
||||||
|
{ 848, 14, 18, 16, 2, -17 }, // 0x4B 'K'
|
||||||
|
{ 880, 10, 18, 14, 2, -17 }, // 0x4C 'L'
|
||||||
|
{ 903, 16, 18, 20, 2, -17 }, // 0x4D 'M'
|
||||||
|
{ 939, 13, 18, 18, 2, -17 }, // 0x4E 'N'
|
||||||
|
{ 969, 17, 18, 19, 1, -17 }, // 0x4F 'O'
|
||||||
|
{ 1008, 12, 18, 16, 2, -17 }, // 0x50 'P'
|
||||||
|
{ 1035, 17, 19, 19, 1, -17 }, // 0x51 'Q'
|
||||||
|
{ 1076, 14, 18, 17, 2, -17 }, // 0x52 'R'
|
||||||
|
{ 1108, 14, 18, 16, 1, -17 }, // 0x53 'S'
|
||||||
|
{ 1140, 12, 18, 15, 1, -17 }, // 0x54 'T'
|
||||||
|
{ 1167, 13, 18, 17, 2, -17 }, // 0x55 'U'
|
||||||
|
{ 1197, 15, 18, 15, 0, -17 }, // 0x56 'V'
|
||||||
|
{ 1231, 22, 18, 22, 0, -17 }, // 0x57 'W'
|
||||||
|
{ 1281, 15, 18, 16, 0, -17 }, // 0x58 'X'
|
||||||
|
{ 1315, 16, 18, 16, 0, -17 }, // 0x59 'Y'
|
||||||
|
{ 1351, 13, 18, 15, 1, -17 }, // 0x5A 'Z'
|
||||||
|
{ 1381, 4, 23, 7, 2, -17 }, // 0x5B '['
|
||||||
|
{ 1393, 7, 18, 7, 0, -17 }, // 0x5C '\'
|
||||||
|
{ 1409, 4, 23, 7, 1, -17 }, // 0x5D ']'
|
||||||
|
{ 1421, 9, 9, 11, 1, -16 }, // 0x5E '^'
|
||||||
|
{ 1432, 15, 1, 13, -1, 4 }, // 0x5F '_'
|
||||||
|
{ 1434, 5, 4, 6, 1, -17 }, // 0x60 '`'
|
||||||
|
{ 1437, 12, 13, 13, 1, -12 }, // 0x61 'a'
|
||||||
|
{ 1457, 12, 18, 13, 1, -17 }, // 0x62 'b'
|
||||||
|
{ 1484, 10, 13, 12, 1, -12 }, // 0x63 'c'
|
||||||
|
{ 1501, 11, 18, 13, 1, -17 }, // 0x64 'd'
|
||||||
|
{ 1526, 11, 13, 13, 1, -12 }, // 0x65 'e'
|
||||||
|
{ 1544, 5, 18, 7, 1, -17 }, // 0x66 'f'
|
||||||
|
{ 1556, 11, 18, 13, 1, -12 }, // 0x67 'g'
|
||||||
|
{ 1581, 10, 18, 13, 1, -17 }, // 0x68 'h'
|
||||||
|
{ 1604, 2, 18, 5, 2, -17 }, // 0x69 'i'
|
||||||
|
{ 1609, 4, 23, 6, 0, -17 }, // 0x6A 'j'
|
||||||
|
{ 1621, 11, 18, 12, 1, -17 }, // 0x6B 'k'
|
||||||
|
{ 1646, 2, 18, 5, 1, -17 }, // 0x6C 'l'
|
||||||
|
{ 1651, 17, 13, 19, 1, -12 }, // 0x6D 'm'
|
||||||
|
{ 1679, 10, 13, 13, 1, -12 }, // 0x6E 'n'
|
||||||
|
{ 1696, 11, 13, 13, 1, -12 }, // 0x6F 'o'
|
||||||
|
{ 1714, 12, 17, 13, 1, -12 }, // 0x70 'p'
|
||||||
|
{ 1740, 11, 17, 13, 1, -12 }, // 0x71 'q'
|
||||||
|
{ 1764, 6, 13, 8, 1, -12 }, // 0x72 'r'
|
||||||
|
{ 1774, 10, 13, 12, 1, -12 }, // 0x73 's'
|
||||||
|
{ 1791, 5, 16, 7, 1, -15 }, // 0x74 't'
|
||||||
|
{ 1801, 10, 13, 13, 1, -12 }, // 0x75 'u'
|
||||||
|
{ 1818, 12, 13, 12, 0, -12 }, // 0x76 'v'
|
||||||
|
{ 1838, 17, 13, 17, 0, -12 }, // 0x77 'w'
|
||||||
|
{ 1866, 11, 13, 11, 0, -12 }, // 0x78 'x'
|
||||||
|
{ 1884, 11, 18, 11, 0, -12 }, // 0x79 'y'
|
||||||
|
{ 1909, 10, 13, 12, 1, -12 }, // 0x7A 'z'
|
||||||
|
{ 1926, 5, 23, 8, 1, -17 }, // 0x7B '{'
|
||||||
|
{ 1941, 2, 23, 6, 2, -17 }, // 0x7C '|'
|
||||||
|
{ 1947, 5, 23, 8, 2, -17 }, // 0x7D '}'
|
||||||
|
{ 1962, 10, 5, 12, 1, -10 } }; // 0x7E '~'
|
||||||
|
|
||||||
|
const GFXfont FreeSans12pt7b PROGMEM = {
|
||||||
|
(uint8_t *)FreeSans12pt7bBitmaps,
|
||||||
|
(GFXglyph *)FreeSans12pt7bGlyphs,
|
||||||
|
0x20, 0x7E, 29 };
|
||||||
|
|
||||||
|
// Approx. 2641 bytes
|
||||||
201
libraries/fonts/FreeSans9pt7b.h
Executable file
201
libraries/fonts/FreeSans9pt7b.h
Executable file
|
|
@ -0,0 +1,201 @@
|
||||||
|
const uint8_t FreeSans9pt7bBitmaps[] PROGMEM = {
|
||||||
|
0xFF, 0xFF, 0xF8, 0xC0, 0xDE, 0xF7, 0x20, 0x09, 0x86, 0x41, 0x91, 0xFF,
|
||||||
|
0x13, 0x04, 0xC3, 0x20, 0xC8, 0xFF, 0x89, 0x82, 0x61, 0x90, 0x10, 0x1F,
|
||||||
|
0x14, 0xDA, 0x3D, 0x1E, 0x83, 0x40, 0x78, 0x17, 0x08, 0xF4, 0x7A, 0x35,
|
||||||
|
0x33, 0xF0, 0x40, 0x20, 0x38, 0x10, 0xEC, 0x20, 0xC6, 0x20, 0xC6, 0x40,
|
||||||
|
0xC6, 0x40, 0x6C, 0x80, 0x39, 0x00, 0x01, 0x3C, 0x02, 0x77, 0x02, 0x63,
|
||||||
|
0x04, 0x63, 0x04, 0x77, 0x08, 0x3C, 0x0E, 0x06, 0x60, 0xCC, 0x19, 0x81,
|
||||||
|
0xE0, 0x18, 0x0F, 0x03, 0x36, 0xC2, 0xD8, 0x73, 0x06, 0x31, 0xE3, 0xC4,
|
||||||
|
0xFE, 0x13, 0x26, 0x6C, 0xCC, 0xCC, 0xC4, 0x66, 0x23, 0x10, 0x8C, 0x46,
|
||||||
|
0x63, 0x33, 0x33, 0x32, 0x66, 0x4C, 0x80, 0x25, 0x7E, 0xA5, 0x00, 0x30,
|
||||||
|
0xC3, 0x3F, 0x30, 0xC3, 0x0C, 0xD6, 0xF0, 0xC0, 0x08, 0x44, 0x21, 0x10,
|
||||||
|
0x84, 0x42, 0x11, 0x08, 0x00, 0x3C, 0x66, 0x42, 0xC3, 0xC3, 0xC3, 0xC3,
|
||||||
|
0xC3, 0xC3, 0xC3, 0x42, 0x66, 0x3C, 0x11, 0x3F, 0x33, 0x33, 0x33, 0x33,
|
||||||
|
0x30, 0x3E, 0x31, 0xB0, 0x78, 0x30, 0x18, 0x1C, 0x1C, 0x1C, 0x18, 0x18,
|
||||||
|
0x10, 0x08, 0x07, 0xF8, 0x3C, 0x66, 0xC3, 0xC3, 0x03, 0x06, 0x1C, 0x07,
|
||||||
|
0x03, 0xC3, 0xC3, 0x66, 0x3C, 0x0C, 0x18, 0x71, 0x62, 0xC9, 0xA3, 0x46,
|
||||||
|
0xFE, 0x18, 0x30, 0x60, 0xC0, 0x7F, 0x20, 0x10, 0x08, 0x08, 0x07, 0xF3,
|
||||||
|
0x8C, 0x03, 0x01, 0x80, 0xF0, 0x6C, 0x63, 0xE0, 0x1E, 0x31, 0x98, 0x78,
|
||||||
|
0x0C, 0x06, 0xF3, 0x8D, 0x83, 0xC1, 0xE0, 0xD0, 0x6C, 0x63, 0xE0, 0xFF,
|
||||||
|
0x03, 0x02, 0x06, 0x04, 0x0C, 0x08, 0x18, 0x18, 0x18, 0x10, 0x30, 0x30,
|
||||||
|
0x3E, 0x31, 0xB0, 0x78, 0x3C, 0x1B, 0x18, 0xF8, 0xC6, 0xC1, 0xE0, 0xF0,
|
||||||
|
0x6C, 0x63, 0xE0, 0x3C, 0x66, 0xC2, 0xC3, 0xC3, 0xC3, 0x67, 0x3B, 0x03,
|
||||||
|
0x03, 0xC2, 0x66, 0x3C, 0xC0, 0x00, 0x30, 0xC0, 0x00, 0x00, 0x64, 0xA0,
|
||||||
|
0x00, 0x81, 0xC7, 0x8E, 0x0C, 0x07, 0x80, 0x70, 0x0E, 0x01, 0x80, 0xFF,
|
||||||
|
0x80, 0x00, 0x1F, 0xF0, 0x00, 0x70, 0x0E, 0x01, 0xC0, 0x18, 0x38, 0x71,
|
||||||
|
0xC0, 0x80, 0x00, 0x3E, 0x31, 0xB0, 0x78, 0x30, 0x18, 0x18, 0x38, 0x18,
|
||||||
|
0x18, 0x0C, 0x00, 0x00, 0x01, 0x80, 0x03, 0xF0, 0x06, 0x0E, 0x06, 0x01,
|
||||||
|
0x86, 0x00, 0x66, 0x1D, 0xBB, 0x31, 0xCF, 0x18, 0xC7, 0x98, 0x63, 0xCC,
|
||||||
|
0x31, 0xE6, 0x11, 0xB3, 0x99, 0xCC, 0xF7, 0x86, 0x00, 0x01, 0x80, 0x00,
|
||||||
|
0x70, 0x40, 0x0F, 0xE0, 0x06, 0x00, 0xF0, 0x0F, 0x00, 0x90, 0x19, 0x81,
|
||||||
|
0x98, 0x10, 0x83, 0x0C, 0x3F, 0xC2, 0x04, 0x60, 0x66, 0x06, 0xC0, 0x30,
|
||||||
|
0xFF, 0x18, 0x33, 0x03, 0x60, 0x6C, 0x0D, 0x83, 0x3F, 0xC6, 0x06, 0xC0,
|
||||||
|
0x78, 0x0F, 0x01, 0xE0, 0x6F, 0xF8, 0x1F, 0x86, 0x19, 0x81, 0xA0, 0x3C,
|
||||||
|
0x01, 0x80, 0x30, 0x06, 0x00, 0xC0, 0x68, 0x0D, 0x83, 0x18, 0x61, 0xF0,
|
||||||
|
0xFF, 0x18, 0x33, 0x03, 0x60, 0x3C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0,
|
||||||
|
0x78, 0x0F, 0x03, 0x60, 0xCF, 0xF0, 0xFF, 0xE0, 0x30, 0x18, 0x0C, 0x06,
|
||||||
|
0x03, 0xFD, 0x80, 0xC0, 0x60, 0x30, 0x18, 0x0F, 0xF8, 0xFF, 0xC0, 0xC0,
|
||||||
|
0xC0, 0xC0, 0xC0, 0xFE, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0x0F, 0x83,
|
||||||
|
0x0E, 0x60, 0x66, 0x03, 0xC0, 0x0C, 0x00, 0xC1, 0xFC, 0x03, 0xC0, 0x36,
|
||||||
|
0x03, 0x60, 0x73, 0x0F, 0x0F, 0x10, 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3C,
|
||||||
|
0x07, 0x80, 0xFF, 0xFE, 0x03, 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3C, 0x06,
|
||||||
|
0xFF, 0xFF, 0xFF, 0xC0, 0x06, 0x0C, 0x18, 0x30, 0x60, 0xC1, 0x83, 0x07,
|
||||||
|
0x8F, 0x1E, 0x27, 0x80, 0xC0, 0xD8, 0x33, 0x0C, 0x63, 0x0C, 0xC1, 0xB8,
|
||||||
|
0x3F, 0x07, 0x30, 0xC3, 0x18, 0x63, 0x06, 0x60, 0x6C, 0x0C, 0xC0, 0xC0,
|
||||||
|
0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xFF, 0xE0,
|
||||||
|
0x3F, 0x01, 0xFC, 0x1F, 0xE0, 0xFD, 0x05, 0xEC, 0x6F, 0x63, 0x79, 0x13,
|
||||||
|
0xCD, 0x9E, 0x6C, 0xF1, 0x47, 0x8E, 0x3C, 0x71, 0x80, 0xE0, 0x7C, 0x0F,
|
||||||
|
0xC1, 0xE8, 0x3D, 0x87, 0x98, 0xF1, 0x1E, 0x33, 0xC3, 0x78, 0x6F, 0x07,
|
||||||
|
0xE0, 0x7C, 0x0E, 0x0F, 0x81, 0x83, 0x18, 0x0C, 0xC0, 0x6C, 0x01, 0xE0,
|
||||||
|
0x0F, 0x00, 0x78, 0x03, 0xC0, 0x1B, 0x01, 0x98, 0x0C, 0x60, 0xC0, 0xF8,
|
||||||
|
0x00, 0xFF, 0x30, 0x6C, 0x0F, 0x03, 0xC0, 0xF0, 0x6F, 0xF3, 0x00, 0xC0,
|
||||||
|
0x30, 0x0C, 0x03, 0x00, 0xC0, 0x00, 0x0F, 0x81, 0x83, 0x18, 0x0C, 0xC0,
|
||||||
|
0x6C, 0x01, 0xE0, 0x0F, 0x00, 0x78, 0x03, 0xC0, 0x1B, 0x01, 0x98, 0x6C,
|
||||||
|
0x60, 0xC0, 0xFB, 0x00, 0x08, 0xFF, 0x8C, 0x0E, 0xC0, 0x6C, 0x06, 0xC0,
|
||||||
|
0x6C, 0x0C, 0xFF, 0x8C, 0x0E, 0xC0, 0x6C, 0x06, 0xC0, 0x6C, 0x06, 0xC0,
|
||||||
|
0x70, 0x3F, 0x18, 0x6C, 0x0F, 0x03, 0xC0, 0x1E, 0x01, 0xF0, 0x0E, 0x00,
|
||||||
|
0xF0, 0x3C, 0x0D, 0x86, 0x3F, 0x00, 0xFF, 0x86, 0x03, 0x01, 0x80, 0xC0,
|
||||||
|
0x60, 0x30, 0x18, 0x0C, 0x06, 0x03, 0x01, 0x80, 0xC0, 0xC0, 0x78, 0x0F,
|
||||||
|
0x01, 0xE0, 0x3C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x78, 0x0F, 0x01,
|
||||||
|
0xB0, 0x61, 0xF0, 0xC0, 0x6C, 0x0D, 0x81, 0x10, 0x63, 0x0C, 0x61, 0x04,
|
||||||
|
0x60, 0xCC, 0x19, 0x01, 0x60, 0x3C, 0x07, 0x00, 0x60, 0xC1, 0x81, 0x30,
|
||||||
|
0xE1, 0x98, 0x70, 0xCC, 0x28, 0x66, 0x26, 0x21, 0x13, 0x30, 0xC8, 0x98,
|
||||||
|
0x6C, 0x4C, 0x14, 0x34, 0x0A, 0x1A, 0x07, 0x07, 0x03, 0x03, 0x80, 0x81,
|
||||||
|
0x80, 0x60, 0x63, 0x0C, 0x30, 0xC1, 0x98, 0x0F, 0x00, 0xE0, 0x06, 0x00,
|
||||||
|
0xF0, 0x19, 0x01, 0x98, 0x30, 0xC6, 0x0E, 0x60, 0x60, 0xC0, 0x36, 0x06,
|
||||||
|
0x30, 0xC3, 0x0C, 0x19, 0x81, 0xD8, 0x0F, 0x00, 0x60, 0x06, 0x00, 0x60,
|
||||||
|
0x06, 0x00, 0x60, 0x06, 0x00, 0xFF, 0xC0, 0x60, 0x30, 0x0C, 0x06, 0x03,
|
||||||
|
0x01, 0xC0, 0x60, 0x30, 0x18, 0x06, 0x03, 0x00, 0xFF, 0xC0, 0xFB, 0x6D,
|
||||||
|
0xB6, 0xDB, 0x6D, 0xB6, 0xE0, 0x84, 0x10, 0x84, 0x10, 0x84, 0x10, 0x84,
|
||||||
|
0x10, 0x80, 0xED, 0xB6, 0xDB, 0x6D, 0xB6, 0xDB, 0xE0, 0x30, 0x60, 0xA2,
|
||||||
|
0x44, 0xD8, 0xA1, 0x80, 0xFF, 0xC0, 0xC6, 0x30, 0x7E, 0x71, 0xB0, 0xC0,
|
||||||
|
0x60, 0xF3, 0xDB, 0x0D, 0x86, 0xC7, 0x3D, 0xC0, 0xC0, 0x60, 0x30, 0x1B,
|
||||||
|
0xCE, 0x36, 0x0F, 0x07, 0x83, 0xC1, 0xE0, 0xF0, 0x7C, 0x6D, 0xE0, 0x3C,
|
||||||
|
0x66, 0xC3, 0xC0, 0xC0, 0xC0, 0xC0, 0xC3, 0x66, 0x3C, 0x03, 0x03, 0x03,
|
||||||
|
0x3B, 0x67, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0x67, 0x3B, 0x3C, 0x66,
|
||||||
|
0xC3, 0xC3, 0xFF, 0xC0, 0xC0, 0xC3, 0x66, 0x3C, 0x36, 0x6F, 0x66, 0x66,
|
||||||
|
0x66, 0x66, 0x60, 0x3B, 0x67, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0x67,
|
||||||
|
0x3B, 0x03, 0x03, 0xC6, 0x7C, 0xC0, 0xC0, 0xC0, 0xDE, 0xE3, 0xC3, 0xC3,
|
||||||
|
0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xFF, 0xFF, 0xC0, 0x30, 0x03,
|
||||||
|
0x33, 0x33, 0x33, 0x33, 0x33, 0x33, 0xE0, 0xC0, 0x60, 0x30, 0x18, 0x4C,
|
||||||
|
0x46, 0x63, 0x61, 0xF0, 0xEC, 0x62, 0x31, 0x98, 0x6C, 0x30, 0xFF, 0xFF,
|
||||||
|
0xFF, 0xC0, 0xDE, 0xF7, 0x1C, 0xF0, 0xC7, 0x86, 0x3C, 0x31, 0xE1, 0x8F,
|
||||||
|
0x0C, 0x78, 0x63, 0xC3, 0x1E, 0x18, 0xC0, 0xDE, 0xE3, 0xC3, 0xC3, 0xC3,
|
||||||
|
0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0x3C, 0x66, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
|
||||||
|
0xC3, 0x66, 0x3C, 0xDE, 0x71, 0xB0, 0x78, 0x3C, 0x1E, 0x0F, 0x07, 0x83,
|
||||||
|
0xE3, 0x6F, 0x30, 0x18, 0x0C, 0x00, 0x3B, 0x67, 0xC3, 0xC3, 0xC3, 0xC3,
|
||||||
|
0xC3, 0xC3, 0x67, 0x3B, 0x03, 0x03, 0x03, 0xDF, 0x31, 0x8C, 0x63, 0x18,
|
||||||
|
0xC6, 0x00, 0x3E, 0xE3, 0xC0, 0xC0, 0xE0, 0x3C, 0x07, 0xC3, 0xE3, 0x7E,
|
||||||
|
0x66, 0xF6, 0x66, 0x66, 0x66, 0x67, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
|
||||||
|
0xC3, 0xC3, 0xC7, 0x7B, 0xC1, 0xA0, 0x98, 0xCC, 0x42, 0x21, 0xB0, 0xD0,
|
||||||
|
0x28, 0x1C, 0x0C, 0x00, 0xC6, 0x1E, 0x38, 0x91, 0xC4, 0xCA, 0x66, 0xD3,
|
||||||
|
0x16, 0xD0, 0xA6, 0x87, 0x1C, 0x38, 0xC0, 0xC6, 0x00, 0x43, 0x62, 0x36,
|
||||||
|
0x1C, 0x18, 0x1C, 0x3C, 0x26, 0x62, 0x43, 0xC1, 0x21, 0x98, 0xCC, 0x42,
|
||||||
|
0x61, 0xB0, 0xD0, 0x38, 0x1C, 0x0C, 0x06, 0x03, 0x01, 0x03, 0x00, 0xFE,
|
||||||
|
0x0C, 0x30, 0xC1, 0x86, 0x18, 0x20, 0xC1, 0xFC, 0x36, 0x66, 0x66, 0x6E,
|
||||||
|
0xCE, 0x66, 0x66, 0x66, 0x30, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0xC6, 0x66,
|
||||||
|
0x66, 0x67, 0x37, 0x66, 0x66, 0x66, 0xC0, 0x61, 0x24, 0x38 };
|
||||||
|
|
||||||
|
const GFXglyph FreeSans9pt7bGlyphs[] PROGMEM = {
|
||||||
|
{ 0, 0, 0, 5, 0, 1 }, // 0x20 ' '
|
||||||
|
{ 0, 2, 13, 6, 2, -12 }, // 0x21 '!'
|
||||||
|
{ 4, 5, 4, 6, 1, -12 }, // 0x22 '"'
|
||||||
|
{ 7, 10, 12, 10, 0, -11 }, // 0x23 '#'
|
||||||
|
{ 22, 9, 16, 10, 1, -13 }, // 0x24 '$'
|
||||||
|
{ 40, 16, 13, 16, 1, -12 }, // 0x25 '%'
|
||||||
|
{ 66, 11, 13, 12, 1, -12 }, // 0x26 '&'
|
||||||
|
{ 84, 2, 4, 4, 1, -12 }, // 0x27 '''
|
||||||
|
{ 85, 4, 17, 6, 1, -12 }, // 0x28 '('
|
||||||
|
{ 94, 4, 17, 6, 1, -12 }, // 0x29 ')'
|
||||||
|
{ 103, 5, 5, 7, 1, -12 }, // 0x2A '*'
|
||||||
|
{ 107, 6, 8, 11, 3, -7 }, // 0x2B '+'
|
||||||
|
{ 113, 2, 4, 5, 2, 0 }, // 0x2C ','
|
||||||
|
{ 114, 4, 1, 6, 1, -4 }, // 0x2D '-'
|
||||||
|
{ 115, 2, 1, 5, 1, 0 }, // 0x2E '.'
|
||||||
|
{ 116, 5, 13, 5, 0, -12 }, // 0x2F '/'
|
||||||
|
{ 125, 8, 13, 10, 1, -12 }, // 0x30 '0'
|
||||||
|
{ 138, 4, 13, 10, 3, -12 }, // 0x31 '1'
|
||||||
|
{ 145, 9, 13, 10, 1, -12 }, // 0x32 '2'
|
||||||
|
{ 160, 8, 13, 10, 1, -12 }, // 0x33 '3'
|
||||||
|
{ 173, 7, 13, 10, 2, -12 }, // 0x34 '4'
|
||||||
|
{ 185, 9, 13, 10, 1, -12 }, // 0x35 '5'
|
||||||
|
{ 200, 9, 13, 10, 1, -12 }, // 0x36 '6'
|
||||||
|
{ 215, 8, 13, 10, 0, -12 }, // 0x37 '7'
|
||||||
|
{ 228, 9, 13, 10, 1, -12 }, // 0x38 '8'
|
||||||
|
{ 243, 8, 13, 10, 1, -12 }, // 0x39 '9'
|
||||||
|
{ 256, 2, 10, 5, 1, -9 }, // 0x3A ':'
|
||||||
|
{ 259, 3, 12, 5, 1, -8 }, // 0x3B ';'
|
||||||
|
{ 264, 9, 9, 11, 1, -8 }, // 0x3C '<'
|
||||||
|
{ 275, 9, 4, 11, 1, -5 }, // 0x3D '='
|
||||||
|
{ 280, 9, 9, 11, 1, -8 }, // 0x3E '>'
|
||||||
|
{ 291, 9, 13, 10, 1, -12 }, // 0x3F '?'
|
||||||
|
{ 306, 17, 16, 18, 1, -12 }, // 0x40 '@'
|
||||||
|
{ 340, 12, 13, 12, 0, -12 }, // 0x41 'A'
|
||||||
|
{ 360, 11, 13, 12, 1, -12 }, // 0x42 'B'
|
||||||
|
{ 378, 11, 13, 13, 1, -12 }, // 0x43 'C'
|
||||||
|
{ 396, 11, 13, 13, 1, -12 }, // 0x44 'D'
|
||||||
|
{ 414, 9, 13, 11, 1, -12 }, // 0x45 'E'
|
||||||
|
{ 429, 8, 13, 11, 1, -12 }, // 0x46 'F'
|
||||||
|
{ 442, 12, 13, 14, 1, -12 }, // 0x47 'G'
|
||||||
|
{ 462, 11, 13, 13, 1, -12 }, // 0x48 'H'
|
||||||
|
{ 480, 2, 13, 5, 2, -12 }, // 0x49 'I'
|
||||||
|
{ 484, 7, 13, 10, 1, -12 }, // 0x4A 'J'
|
||||||
|
{ 496, 11, 13, 12, 1, -12 }, // 0x4B 'K'
|
||||||
|
{ 514, 8, 13, 10, 1, -12 }, // 0x4C 'L'
|
||||||
|
{ 527, 13, 13, 15, 1, -12 }, // 0x4D 'M'
|
||||||
|
{ 549, 11, 13, 13, 1, -12 }, // 0x4E 'N'
|
||||||
|
{ 567, 13, 13, 14, 1, -12 }, // 0x4F 'O'
|
||||||
|
{ 589, 10, 13, 12, 1, -12 }, // 0x50 'P'
|
||||||
|
{ 606, 13, 14, 14, 1, -12 }, // 0x51 'Q'
|
||||||
|
{ 629, 12, 13, 13, 1, -12 }, // 0x52 'R'
|
||||||
|
{ 649, 10, 13, 12, 1, -12 }, // 0x53 'S'
|
||||||
|
{ 666, 9, 13, 11, 1, -12 }, // 0x54 'T'
|
||||||
|
{ 681, 11, 13, 13, 1, -12 }, // 0x55 'U'
|
||||||
|
{ 699, 11, 13, 12, 0, -12 }, // 0x56 'V'
|
||||||
|
{ 717, 17, 13, 17, 0, -12 }, // 0x57 'W'
|
||||||
|
{ 745, 12, 13, 12, 0, -12 }, // 0x58 'X'
|
||||||
|
{ 765, 12, 13, 12, 0, -12 }, // 0x59 'Y'
|
||||||
|
{ 785, 10, 13, 11, 1, -12 }, // 0x5A 'Z'
|
||||||
|
{ 802, 3, 17, 5, 1, -12 }, // 0x5B '['
|
||||||
|
{ 809, 5, 13, 5, 0, -12 }, // 0x5C '\'
|
||||||
|
{ 818, 3, 17, 5, 0, -12 }, // 0x5D ']'
|
||||||
|
{ 825, 7, 7, 8, 1, -12 }, // 0x5E '^'
|
||||||
|
{ 832, 10, 1, 10, 0, 3 }, // 0x5F '_'
|
||||||
|
{ 834, 4, 3, 5, 0, -12 }, // 0x60 '`'
|
||||||
|
{ 836, 9, 10, 10, 1, -9 }, // 0x61 'a'
|
||||||
|
{ 848, 9, 13, 10, 1, -12 }, // 0x62 'b'
|
||||||
|
{ 863, 8, 10, 9, 1, -9 }, // 0x63 'c'
|
||||||
|
{ 873, 8, 13, 10, 1, -12 }, // 0x64 'd'
|
||||||
|
{ 886, 8, 10, 10, 1, -9 }, // 0x65 'e'
|
||||||
|
{ 896, 4, 13, 5, 1, -12 }, // 0x66 'f'
|
||||||
|
{ 903, 8, 14, 10, 1, -9 }, // 0x67 'g'
|
||||||
|
{ 917, 8, 13, 10, 1, -12 }, // 0x68 'h'
|
||||||
|
{ 930, 2, 13, 4, 1, -12 }, // 0x69 'i'
|
||||||
|
{ 934, 4, 17, 4, 0, -12 }, // 0x6A 'j'
|
||||||
|
{ 943, 9, 13, 9, 1, -12 }, // 0x6B 'k'
|
||||||
|
{ 958, 2, 13, 4, 1, -12 }, // 0x6C 'l'
|
||||||
|
{ 962, 13, 10, 15, 1, -9 }, // 0x6D 'm'
|
||||||
|
{ 979, 8, 10, 10, 1, -9 }, // 0x6E 'n'
|
||||||
|
{ 989, 8, 10, 10, 1, -9 }, // 0x6F 'o'
|
||||||
|
{ 999, 9, 13, 10, 1, -9 }, // 0x70 'p'
|
||||||
|
{ 1014, 8, 13, 10, 1, -9 }, // 0x71 'q'
|
||||||
|
{ 1027, 5, 10, 6, 1, -9 }, // 0x72 'r'
|
||||||
|
{ 1034, 8, 10, 9, 1, -9 }, // 0x73 's'
|
||||||
|
{ 1044, 4, 12, 5, 1, -11 }, // 0x74 't'
|
||||||
|
{ 1050, 8, 10, 10, 1, -9 }, // 0x75 'u'
|
||||||
|
{ 1060, 9, 10, 9, 0, -9 }, // 0x76 'v'
|
||||||
|
{ 1072, 13, 10, 13, 0, -9 }, // 0x77 'w'
|
||||||
|
{ 1089, 8, 10, 9, 0, -9 }, // 0x78 'x'
|
||||||
|
{ 1099, 9, 14, 9, 0, -9 }, // 0x79 'y'
|
||||||
|
{ 1115, 7, 10, 9, 1, -9 }, // 0x7A 'z'
|
||||||
|
{ 1124, 4, 17, 6, 1, -12 }, // 0x7B '{'
|
||||||
|
{ 1133, 2, 17, 4, 2, -12 }, // 0x7C '|'
|
||||||
|
{ 1138, 4, 17, 6, 1, -12 }, // 0x7D '}'
|
||||||
|
{ 1147, 7, 3, 9, 1, -7 } }; // 0x7E '~'
|
||||||
|
|
||||||
|
const GFXfont FreeSans9pt7b PROGMEM = {
|
||||||
|
(uint8_t *)FreeSans9pt7bBitmaps,
|
||||||
|
(GFXglyph *)FreeSans9pt7bGlyphs,
|
||||||
|
0x20, 0x7E, 22 };
|
||||||
|
|
||||||
|
// Approx. 1822 bytes
|
||||||
123
libraries/fonts/Picopixel.h
Executable file
123
libraries/fonts/Picopixel.h
Executable file
|
|
@ -0,0 +1,123 @@
|
||||||
|
// Picopixel by Sebastian Weber. A tiny font
|
||||||
|
// with all characters within a 6 pixel height.
|
||||||
|
|
||||||
|
const uint8_t PicopixelBitmaps[] PROGMEM = {
|
||||||
|
0xE8, 0xB4, 0x57, 0xD5, 0xF5, 0x00, 0x4E, 0x3E, 0x80, 0xA5, 0x4A, 0x4A,
|
||||||
|
0x5A, 0x50, 0xC0, 0x6A, 0x40, 0x95, 0x80, 0xAA, 0x80, 0x5D, 0x00, 0x60,
|
||||||
|
0xE0, 0x80, 0x25, 0x48, 0x56, 0xD4, 0x75, 0x40, 0xC5, 0x4E, 0xC5, 0x1C,
|
||||||
|
0x97, 0x92, 0xF3, 0x1C, 0x53, 0x54, 0xE5, 0x48, 0x55, 0x54, 0x55, 0x94,
|
||||||
|
0xA0, 0x46, 0x64, 0xE3, 0x80, 0x98, 0xC5, 0x04, 0x56, 0xC6, 0x57, 0xDA,
|
||||||
|
0xD7, 0x5C, 0x72, 0x46, 0xD6, 0xDC, 0xF3, 0xCE, 0xF3, 0x48, 0x72, 0xD4,
|
||||||
|
0xB7, 0xDA, 0xF8, 0x24, 0xD4, 0xBB, 0x5A, 0x92, 0x4E, 0x8E, 0xEB, 0x58,
|
||||||
|
0x80, 0x9D, 0xB9, 0x90, 0x56, 0xD4, 0xD7, 0x48, 0x56, 0xD4, 0x40, 0xD7,
|
||||||
|
0x5A, 0x71, 0x1C, 0xE9, 0x24, 0xB6, 0xD4, 0xB6, 0xA4, 0x8C, 0x6B, 0x55,
|
||||||
|
0x00, 0xB5, 0x5A, 0xB5, 0x24, 0xE5, 0x4E, 0xEA, 0xC0, 0x91, 0x12, 0xD5,
|
||||||
|
0xC0, 0x54, 0xF0, 0x90, 0xC7, 0xF0, 0x93, 0x5E, 0x71, 0x80, 0x25, 0xDE,
|
||||||
|
0x5E, 0x30, 0x6E, 0x80, 0x77, 0x9C, 0x93, 0x5A, 0xB8, 0x45, 0x60, 0x92,
|
||||||
|
0xEA, 0xAA, 0x40, 0xD5, 0x6A, 0xD6, 0x80, 0x55, 0x00, 0xD7, 0x40, 0x75,
|
||||||
|
0x90, 0xE8, 0x71, 0xE0, 0xBA, 0x40, 0xB5, 0x80, 0xB5, 0x00, 0x8D, 0x54,
|
||||||
|
0xAA, 0x80, 0xAC, 0xE0, 0xE5, 0x70, 0x6A, 0x26, 0xFC, 0xC8, 0xAC, 0x5A };
|
||||||
|
|
||||||
|
const GFXglyph PicopixelGlyphs[] PROGMEM = {
|
||||||
|
{ 0, 0, 0, 2, 0, 1 }, // 0x20 ' '
|
||||||
|
{ 0, 1, 5, 2, 0, -4 }, // 0x21 '!'
|
||||||
|
{ 1, 3, 2, 4, 0, -4 }, // 0x22 '"'
|
||||||
|
{ 2, 5, 5, 6, 0, -4 }, // 0x23 '#'
|
||||||
|
{ 6, 3, 6, 4, 0, -4 }, // 0x24 '$'
|
||||||
|
{ 9, 3, 5, 4, 0, -4 }, // 0x25 '%'
|
||||||
|
{ 11, 4, 5, 5, 0, -4 }, // 0x26 '&'
|
||||||
|
{ 14, 1, 2, 2, 0, -4 }, // 0x27 '''
|
||||||
|
{ 15, 2, 5, 3, 0, -4 }, // 0x28 '('
|
||||||
|
{ 17, 2, 5, 3, 0, -4 }, // 0x29 ')'
|
||||||
|
{ 19, 3, 3, 4, 0, -3 }, // 0x2A '*'
|
||||||
|
{ 21, 3, 3, 4, 0, -3 }, // 0x2B '+'
|
||||||
|
{ 23, 2, 2, 3, 0, 0 }, // 0x2C ','
|
||||||
|
{ 24, 3, 1, 4, 0, -2 }, // 0x2D '-'
|
||||||
|
{ 25, 1, 1, 2, 0, 0 }, // 0x2E '.'
|
||||||
|
{ 26, 3, 5, 4, 0, -4 }, // 0x2F '/'
|
||||||
|
{ 28, 3, 5, 4, 0, -4 }, // 0x30 '0'
|
||||||
|
{ 30, 2, 5, 3, 0, -4 }, // 0x31 '1'
|
||||||
|
{ 32, 3, 5, 4, 0, -4 }, // 0x32 '2'
|
||||||
|
{ 34, 3, 5, 4, 0, -4 }, // 0x33 '3'
|
||||||
|
{ 36, 3, 5, 4, 0, -4 }, // 0x34 '4'
|
||||||
|
{ 38, 3, 5, 4, 0, -4 }, // 0x35 '5'
|
||||||
|
{ 40, 3, 5, 4, 0, -4 }, // 0x36 '6'
|
||||||
|
{ 42, 3, 5, 4, 0, -4 }, // 0x37 '7'
|
||||||
|
{ 44, 3, 5, 4, 0, -4 }, // 0x38 '8'
|
||||||
|
{ 46, 3, 5, 4, 0, -4 }, // 0x39 '9'
|
||||||
|
{ 48, 1, 3, 2, 0, -3 }, // 0x3A ':'
|
||||||
|
{ 49, 2, 4, 3, 0, -3 }, // 0x3B ';'
|
||||||
|
{ 50, 2, 3, 3, 0, -3 }, // 0x3C '<'
|
||||||
|
{ 51, 3, 3, 4, 0, -3 }, // 0x3D '='
|
||||||
|
{ 53, 2, 3, 3, 0, -3 }, // 0x3E '>'
|
||||||
|
{ 54, 3, 5, 4, 0, -4 }, // 0x3F '?'
|
||||||
|
{ 56, 3, 5, 4, 0, -4 }, // 0x40 '@'
|
||||||
|
{ 58, 3, 5, 4, 0, -4 }, // 0x41 'A'
|
||||||
|
{ 60, 3, 5, 4, 0, -4 }, // 0x42 'B'
|
||||||
|
{ 62, 3, 5, 4, 0, -4 }, // 0x43 'C'
|
||||||
|
{ 64, 3, 5, 4, 0, -4 }, // 0x44 'D'
|
||||||
|
{ 66, 3, 5, 4, 0, -4 }, // 0x45 'E'
|
||||||
|
{ 68, 3, 5, 4, 0, -4 }, // 0x46 'F'
|
||||||
|
{ 70, 3, 5, 4, 0, -4 }, // 0x47 'G'
|
||||||
|
{ 72, 3, 5, 4, 0, -4 }, // 0x48 'H'
|
||||||
|
{ 74, 1, 5, 2, 0, -4 }, // 0x49 'I'
|
||||||
|
{ 75, 3, 5, 4, 0, -4 }, // 0x4A 'J'
|
||||||
|
{ 77, 3, 5, 4, 0, -4 }, // 0x4B 'K'
|
||||||
|
{ 79, 3, 5, 4, 0, -4 }, // 0x4C 'L'
|
||||||
|
{ 81, 5, 5, 6, 0, -4 }, // 0x4D 'M'
|
||||||
|
{ 85, 4, 5, 5, 0, -4 }, // 0x4E 'N'
|
||||||
|
{ 88, 3, 5, 4, 0, -4 }, // 0x4F 'O'
|
||||||
|
{ 90, 3, 5, 4, 0, -4 }, // 0x50 'P'
|
||||||
|
{ 92, 3, 6, 4, 0, -4 }, // 0x51 'Q'
|
||||||
|
{ 95, 3, 5, 4, 0, -4 }, // 0x52 'R'
|
||||||
|
{ 97, 3, 5, 4, 0, -4 }, // 0x53 'S'
|
||||||
|
{ 99, 3, 5, 4, 0, -4 }, // 0x54 'T'
|
||||||
|
{ 101, 3, 5, 4, 0, -4 }, // 0x55 'U'
|
||||||
|
{ 103, 3, 5, 4, 0, -4 }, // 0x56 'V'
|
||||||
|
{ 105, 5, 5, 6, 0, -4 }, // 0x57 'W'
|
||||||
|
{ 109, 3, 5, 4, 0, -4 }, // 0x58 'X'
|
||||||
|
{ 111, 3, 5, 4, 0, -4 }, // 0x59 'Y'
|
||||||
|
{ 113, 3, 5, 4, 0, -4 }, // 0x5A 'Z'
|
||||||
|
{ 115, 2, 5, 3, 0, -4 }, // 0x5B '['
|
||||||
|
{ 117, 3, 5, 4, 0, -4 }, // 0x5C '\'
|
||||||
|
{ 119, 2, 5, 3, 0, -4 }, // 0x5D ']'
|
||||||
|
{ 121, 3, 2, 4, 0, -4 }, // 0x5E '^'
|
||||||
|
{ 122, 4, 1, 4, 0, 1 }, // 0x5F '_'
|
||||||
|
{ 123, 2, 2, 3, 0, -4 }, // 0x60 '`'
|
||||||
|
{ 124, 3, 4, 4, 0, -3 }, // 0x61 'a'
|
||||||
|
{ 126, 3, 5, 4, 0, -4 }, // 0x62 'b'
|
||||||
|
{ 128, 3, 3, 4, 0, -2 }, // 0x63 'c'
|
||||||
|
{ 130, 3, 5, 4, 0, -4 }, // 0x64 'd'
|
||||||
|
{ 132, 3, 4, 4, 0, -3 }, // 0x65 'e'
|
||||||
|
{ 134, 2, 5, 3, 0, -4 }, // 0x66 'f'
|
||||||
|
{ 136, 3, 5, 4, 0, -3 }, // 0x67 'g'
|
||||||
|
{ 138, 3, 5, 4, 0, -4 }, // 0x68 'h'
|
||||||
|
{ 140, 1, 5, 2, 0, -4 }, // 0x69 'i'
|
||||||
|
{ 141, 2, 6, 3, 0, -4 }, // 0x6A 'j'
|
||||||
|
{ 143, 3, 5, 4, 0, -4 }, // 0x6B 'k'
|
||||||
|
{ 145, 2, 5, 3, 0, -4 }, // 0x6C 'l'
|
||||||
|
{ 147, 5, 3, 6, 0, -2 }, // 0x6D 'm'
|
||||||
|
{ 149, 3, 3, 4, 0, -2 }, // 0x6E 'n'
|
||||||
|
{ 151, 3, 3, 4, 0, -2 }, // 0x6F 'o'
|
||||||
|
{ 153, 3, 4, 4, 0, -2 }, // 0x70 'p'
|
||||||
|
{ 155, 3, 4, 4, 0, -2 }, // 0x71 'q'
|
||||||
|
{ 157, 2, 3, 3, 0, -2 }, // 0x72 'r'
|
||||||
|
{ 158, 3, 4, 4, 0, -3 }, // 0x73 's'
|
||||||
|
{ 160, 2, 5, 3, 0, -4 }, // 0x74 't'
|
||||||
|
{ 162, 3, 3, 4, 0, -2 }, // 0x75 'u'
|
||||||
|
{ 164, 3, 3, 4, 0, -2 }, // 0x76 'v'
|
||||||
|
{ 166, 5, 3, 6, 0, -2 }, // 0x77 'w'
|
||||||
|
{ 168, 3, 3, 4, 0, -2 }, // 0x78 'x'
|
||||||
|
{ 170, 3, 4, 4, 0, -2 }, // 0x79 'y'
|
||||||
|
{ 172, 3, 4, 4, 0, -3 }, // 0x7A 'z'
|
||||||
|
{ 174, 3, 5, 4, 0, -4 }, // 0x7B '{'
|
||||||
|
{ 176, 1, 6, 2, 0, -4 }, // 0x7C '|'
|
||||||
|
{ 177, 3, 5, 4, 0, -4 }, // 0x7D '}'
|
||||||
|
{ 179, 4, 2, 5, 0, -3 } }; // 0x7E '~'
|
||||||
|
|
||||||
|
const GFXfont Picopixel PROGMEM = {
|
||||||
|
(uint8_t *)PicopixelBitmaps,
|
||||||
|
(GFXglyph *)PicopixelGlyphs,
|
||||||
|
0x20, 0x7E, 7 };
|
||||||
|
|
||||||
|
// Approx. 852 bytes
|
||||||
BIN
tools/ESP32FS/tool/esp32fs.jar
Executable file
BIN
tools/ESP32FS/tool/esp32fs.jar
Executable file
Binary file not shown.
Loading…
Reference in New Issue
Block a user