first commit

This commit is contained in:
2022-08-24 08:32:29 +02:00
commit d8e2fd5daa
53 changed files with 18971 additions and 0 deletions
+861
View File
@@ -0,0 +1,861 @@
/*
* Functions for using SX127x in FSK mode (mainly receive)
* Copyright (C) 2019 Hansi Reiser, dl9rdz
*
* Partially based on the SX1278 libraray for managing Semtech modules
* Copyright (C) 2015 Wireless Open Source
* http://wirelessopensource.com
*
* SPDX-License-Identifier: LGPL-2.1+
*/
#include "SX1278FSK.h"
#include "SPI.h"
#include <Sonde.h>
#include <Display.h>
SX1278FSK::SX1278FSK()
{
// Initialize class variables
};
static SPISettings spiset = SPISettings(40000000L, MSBFIRST, SPI_MODE0);
/*
Function: Turns the module ON.
Returns: 0 on success, 1 otherwise
*/
uint8_t SX1278FSK::ON()
{
uint8_t state = 2;
#if (SX1278FSK_debug_mode > 1)
Serial.println();
Serial.println(F("Starting 'ON'"));
#endif
// Powering the module
pinMode(SX1278_SS, OUTPUT);
digitalWrite(SX1278_SS, HIGH);
//Configure the MISO, MOSI, CS, SPCR.
SPI.begin();
//Set most significant bit first
SPI.setBitOrder(MSBFIRST);
//Divide the clock frequency
SPI.setClockDivider(SPI_CLOCK_DIV2);
//Set data mode
SPI.setDataMode(SPI_MODE0);
// Set Maximum Over Current Protection
state = setMaxCurrent(0x1B);
if( state == 0 )
{
#if (SX1278FSK_debug_mode > 1)
Serial.println(F("## Setting ON with maximum current supply ##"));
Serial.println();
#endif
}
else
{
return 1;
}
// set FSK mode
state = setFSK();
return state;
}
/*
Function: Turn the module OFF.
Returns: Nothing
*/
void SX1278FSK::OFF()
{
#if (SX1278FSK_debug_mode > 1)
Serial.println();
Serial.println(F("Starting 'OFF'"));
#endif
SPI.end();
// Powering the module
pinMode(SX1278_SS,OUTPUT);
digitalWrite(SX1278_SS,LOW);
#if (SX1278FSK_debug_mode > 1)
Serial.println(F("## Setting OFF ##"));
Serial.println();
#endif
}
/*
Function: Reads the indicated register.
Returns: The content of the register
Parameters:
address: address register to read from
*/
byte SX1278FSK::readRegister(byte address)
{
byte value = 0x00;
SPI.beginTransaction(spiset);
digitalWrite(SX1278_SS,LOW);
//delay(1);
bitClear(address, 7); // Bit 7 cleared to write in registers
SPI.transfer(address);
value = SPI.transfer(0x00);
digitalWrite(SX1278_SS,HIGH);
SPI.endTransaction();
#if (SX1278FSK_debug_mode > 1)
if(address!=0x3F) {
Serial.print(F("## Reading: ##\t"));
Serial.print(F("Register "));
Serial.print(address, HEX);
Serial.print(F(": "));
Serial.print(value, HEX);
Serial.println();
}
#endif
return value;
}
/*
Function: Writes on the indicated register.
Returns: Nothing
Parameters:
address: address register to write in
data: value to write in the register
*/
void SX1278FSK::writeRegister(byte address, byte data)
{
SPI.beginTransaction(spiset);
digitalWrite(SX1278_SS,LOW);
//delay(1);
bitSet(address, 7); // Bit 7 set to read from registers
SPI.transfer(address);
SPI.transfer(data);
digitalWrite(SX1278_SS,HIGH);
SPI.endTransaction();
#if (SX1278FSK_debug_mode > 1)
Serial.print(F("## Writing: ##\t"));
Serial.print(F("Register "));
bitClear(address, 7);
Serial.print(address, HEX);
Serial.print(F(": "));
Serial.print(data, HEX);
Serial.println();
#endif
}
/*
* Function: Clears the IRQ flags
*
* Configuration registers are accessed through the SPI interface.
* Registers are readable in all device mode including Sleep. However, they
* should be written only in Sleep and Stand-by modes.
*
* Returns: Nothing
*/
void SX1278FSK::clearIRQFlags()
{
byte st0;
// Save the previous status
st0 = readRegister(REG_OP_MODE);
// Stdby mode to write in registers
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE);
// FSK mode flags1 register
writeRegister(REG_IRQ_FLAGS1, 0xFF);
// FSK mode flags2 register
writeRegister(REG_IRQ_FLAGS2, 0xFF);
// Getting back to previous status
if(st0 != FSK_STANDBY_MODE) {
writeRegister(REG_OP_MODE, st0);
}
#if (SX1278FSK_debug_mode > 1)
Serial.println(F("## FSK flags cleared ##"));
#endif
}
/*
Function: Sets the module in FSK mode.
Returns: Integer that determines if there has been any error
state = 2 --> The command has not been executed
state = 1 --> There has been an error while executing the command
state = 0 --> The command has been executed with no errors
*/
uint8_t SX1278FSK::setFSK()
{
uint8_t state = 2;
byte st0;
byte config1;
#if (SX1278FSK_debug_mode > 1)
Serial.println();
Serial.println(F("Starting 'setFSK'"));
#endif
writeRegister(REG_OP_MODE, FSK_SLEEP_MODE); // Sleep mode (mandatory to change mode)
// If we are in LORA mode, above line activate Sleep mode, but does not change mode to FSK
// as mode change is only allowed in sleep mode. Next line changes to FSK
writeRegister(REG_OP_MODE, FSK_SLEEP_MODE);
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE); // FSK standby mode
//writeRegister(REG_FIFO_THRESH, 0x80); // condition to start packet tx
//config1 = readRegister(REG_SYNC_CONFIG);
//config1 = config1 & B00111111;
//writeRegister(REG_SYNC_CONFIG,config1);
delay(100);
st0 = readRegister(REG_OP_MODE); // Reading config mode
if( st0 == FSK_STANDBY_MODE )
{ // FSK mode
state = 0;
#if (SX1278FSK_debug_mode > 1)
Serial.println(F("## FSK set with success ##"));
Serial.println();
#endif
} else { // LoRa mode
state = 1;
Serial.println( st0 );
#if (SX1278FSK_debug_mode > 1)
Serial.println(F("** There has been an error while setting FSK **"));
Serial.println();
#endif
}
return state;
}
/* Function: Sets FSK bitrate
* Returns: 0 for success, >0 in case of error
* Parameters: bps: requested bitrate
* (raw data rate, for Mancester encoding, the effective bitrate is bps/2)
*/
uint8_t SX1278FSK::setBitrate(float bps)
{
// TODO: Check if FSK mode is active
// check if bitrate is allowed allowed bitrate
if((bps < 1200) || (bps > 300000)) {
return 1;
}
// set mode to FSK STANDBY
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE);
// set bit rate
uint16_t bitRate = (SX127X_CRYSTAL_FREQ * 1.0) / bps;
writeRegister(REG_BITRATE_MSB, (bitRate & 0xFF00) >> 8);
writeRegister(REG_BITRATE_LSB, (bitRate & 0x00FF));
// also set fractional part
uint16_t fracRate = (SX127X_CRYSTAL_FREQ * 16.0) / bps - bitRate * 16 + 0.5;
writeRegister(REG_BIT_RATE_FRAC, fracRate&0x0F);
return 0;
}
/* Function: Gets configured bitrate
* Returns bitrate in bit/second
*/
float SX1278FSK::getBitrate()
{
uint8_t fmsb = readRegister(REG_BITRATE_MSB);
uint8_t flsb = readRegister(REG_BITRATE_LSB);
uint8_t ffrac = readRegister(REG_BIT_RATE_FRAC) & 0x0F;
return SX127X_CRYSTAL_FREQ / ( (fmsb<<8) + flsb + ffrac / 16.0 );
}
//typedef struct rxbwset { float bw; uint8_t mant; uint8_t rxp; } st_rxbwsettings;
uint8_t SX1278FSK::setRxBandwidth(float bw)
{
// TODO: Check if in FSK mode
//
if(bw<2600 || bw>250000) { return 1; /* invalid */ }
uint8_t rxbwexp = 1;
bw = SX127X_CRYSTAL_FREQ / bw / 8;
while(bw>31) { rxbwexp++; bw/=2.0; }
uint8_t rxbwmant = bw<17?0 : bw<21? 1:2;
// set mode to FSK STANDBY
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE);
writeRegister(REG_RX_BW, rxbwexp | (rxbwmant<<3));
return 0;
}
float SX1278FSK::getRxBandwidth()
{
uint8_t rxbw = readRegister(REG_RX_BW);
uint8_t rxbwexp = rxbw&0x07;
uint8_t rxbwmant = (rxbw>>3)&0x03;
rxbwmant = 16 + 4*rxbwmant;
return SX127X_CRYSTAL_FREQ / ( rxbwmant << (rxbwexp+2));
}
uint8_t SX1278FSK::setAFCBandwidth(float bw)
{
// TODO: Check if in FSK mode
//
if(bw<2600 || bw>250000) { return 1; /* invalid */ }
uint8_t rxbwexp = 1;
bw = SX127X_CRYSTAL_FREQ / bw / 8;
while(bw>31) { rxbwexp++; bw/=2.0; }
uint8_t rxbwmant = bw<17?0 : bw<21? 1:2;
// set mode to FSK STANDBY
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE);
writeRegister(REG_AFC_BW, rxbwexp | (rxbwmant<<3));
return 0;
}
float SX1278FSK::getAFCBandwidth()
{
uint8_t rxbw = readRegister(REG_AFC_BW);
uint8_t rxbwexp = rxbw&0x07;
uint8_t rxbwmant = (rxbw>>3)&0x03;
rxbwmant = 16 + 4*rxbwmant;
return SX127X_CRYSTAL_FREQ / ( rxbwmant << (rxbwexp+2));
}
uint8_t SX1278FSK::setFrequency(float freq) {
// set mode to FSK STANDBY
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE);
freq += sonde.config.freqofs; // manual frequency correction
uint32_t frf = freq * 1.0 * (1<<19) / SX127X_CRYSTAL_FREQ;
writeRegister(REG_FRF_MSB, (frf&0xff0000)>>16);
writeRegister(REG_FRF_MID, (frf&0x00ff00)>>8);
writeRegister(REG_FRF_LSB, (frf&0x0000ff));
return 0;
}
float SX1278FSK::getFrequency() {
uint8_t fmsb = readRegister(REG_FRF_MSB);
uint8_t fmid = readRegister(REG_FRF_MID);
uint8_t flsb = readRegister(REG_FRF_LSB);
return ((fmsb<<16)|(fmid<<8)|flsb) * 1.0 / (1<<19) * SX127X_CRYSTAL_FREQ;
}
static int gaintab[]={-999,0,-6,-12,-24,-36,-48,-999};
int SX1278FSK::getLNAGain() {
int gain = (readRegister(REG_LNA)>>5)&0x07;
return gaintab[gain];
}
uint8_t SX1278FSK::setLNAGain(int gain) {
uint8_t g=1;
while(gain<gaintab[g] && g<6) {g++; }
writeRegister(REG_LNA, g<<5);
return 0;
}
uint8_t SX1278FSK::getRxConf() {
return readRegister(REG_RX_CONFIG);
}
uint8_t SX1278FSK::setRxConf(uint8_t conf) {
writeRegister(REG_RX_CONFIG, conf);
return 0;
}
uint8_t SX1278FSK::setSyncConf(uint8_t conf, int len, const uint8_t *syncpattern) {
int res=0;
writeRegister(REG_SYNC_CONFIG, conf);
if(len>8) return 1;
for(int i=0; i<len; i++) {
writeRegister(REG_SYNC_VALUE1+i, syncpattern[i]);
}
return res;
}
uint8_t SX1278FSK::getSyncConf() {
return sx1278.readRegister(REG_SYNC_CONFIG);
}
uint8_t SX1278FSK::setPreambleDetect(uint8_t conf) {
sx1278.writeRegister(REG_PREAMBLE_DETECT, conf);
return 0;
}
uint8_t SX1278FSK::getPreambleDetect() {
return sx1278.readRegister(REG_PREAMBLE_DETECT);
}
uint8_t SX1278FSK::setPacketConfig(uint8_t conf1, uint8_t conf2)
{
uint8_t ret=0;
sx1278.writeRegister(REG_PACKET_CONFIG1, conf1);
sx1278.writeRegister(REG_PACKET_CONFIG2, conf2);
return ret;
};
uint16_t SX1278FSK::getPacketConfig() {
uint8_t c1 = sx1278.readRegister(REG_PACKET_CONFIG1);
uint8_t c2 = sx1278.readRegister(REG_PACKET_CONFIG2);
return (c2<<8)|c1;
}
/*
Function: Gets the preamble length from the module.
Returns: preamble length
*/
uint16_t SX1278FSK::getPreambleLength()
{
uint16_t p_length;
#if (SX1278FSK_debug_mode > 1)
Serial.println();
Serial.println(F("Starting 'getPreambleLength'"));
#endif
p_length = readRegister(REG_PREAMBLE_MSB_FSK);
p_length = (p_length<<8) | readRegister(REG_PREAMBLE_LSB_FSK);
#if (SX1278FSK_debug_mode > 1)
Serial.print(F("## Preamble length configured is "));
Serial.print(p_length, HEX);
Serial.print(F(" ##"));
Serial.println();
#endif
return p_length;
}
/*
Function: Sets the preamble length in the module
Returns: Integer that determines if there has been any error
state = 2 --> The command has not been executed
state = 1 --> There has been an error while executing the command
state = 0 --> The command has been executed with no errors
Parameters:
l: length value to set as preamble length.
*/
uint8_t SX1278FSK::setPreambleLength(uint16_t l)
{
byte st0;
int8_t state = 2;
#if (SX1278FSK_debug_mode > 1)
Serial.println();
Serial.println(F("Starting 'setPreambleLength'"));
#endif
st0 = readRegister(REG_OP_MODE); // Save the previous status
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE); // Set Standby mode to write in registers
// Storing MSB preamble length in FSK mode
writeRegister(REG_PREAMBLE_MSB_FSK, l>>8);
writeRegister(REG_PREAMBLE_LSB_FSK, l&0xFF);
state = 0;
#if (SX1278FSK_debug_mode > 1)
Serial.print(F("## Preamble length "));
Serial.print(l, HEX);
Serial.println(F(" has been successfully set ##"));
Serial.println();
#endif
if(st0 != FSK_STANDBY_MODE) {
writeRegister(REG_OP_MODE, st0); // Getting back to previous status
}
return state;
}
/*
Function: Gets the payload length from the module.
Returns: configured length; -1 on error
*/
int SX1278FSK::getPayloadLength()
{
int length;
#if (SX1278FSK_debug_mode > 1)
Serial.println();
Serial.println(F("Starting 'getPayloadLength'"));
#endif
length = readRegister(REG_PAYLOAD_LENGTH_FSK);
#if (SX1278FSK_debug_mode > 1)
Serial.print(F("## Payload length configured is "));
Serial.print(length);
Serial.println(F(" ##"));
#endif
return length;
}
/*
Function: Sets the payload length from the module.
Returns: 0 for ok, otherwise error
// TODO: Larger than 255 bytes?
*/
uint8_t SX1278FSK::setPayloadLength(int len)
{
#if (SX1278FSK_debug_mode > 1)
Serial.print(F("Starting 'setPayloadLength'"));
Serial.println(len);
#endif
uint8_t conf2 = readRegister(REG_PACKET_CONFIG2);
conf2 = (conf2 & 0xF8) | ( (len>>8)&0x7 );
writeRegister(REG_PACKET_CONFIG2, conf2);
writeRegister(REG_PAYLOAD_LENGTH_FSK, len&0xFF);
return 0;
}
/*
Function: Gets the current value of RSSI.
Returns: RSSI value
*/
int16_t SX1278FSK::getRSSI()
{
int16_t RSSI;
//int rssi_mean = 0;
int total = 1;
/// FSK mode
// get mean value of RSSI
for(int i = 0; i < total; i++)
{
RSSI = readRegister(REG_RSSI_VALUE_FSK);
//rssi_mean += _RSSI;
}
//rssi_mean = rssi_mean / total;
//RSSI = rssi_mean;
#if (SX1278FSK_debug_mode > 0)
Serial.print(F("## RSSI value is "));
Serial.print(RSSI);
Serial.println(F(" ##"));
#endif
return RSSI;
}
/*
Function: Gets the current value of FEI (frequency error indication)
Returns: FEI value in Hz
*/
int32_t SX1278FSK::getFEI()
{
int32_t FEI;
int16_t regval = (readRegister(REG_FEI_MSB)<<8) | readRegister(REG_FEI_LSB);
//Serial.printf("feireg: %04x\n", regval);
FEI = (int32_t)(regval * SX127X_FSTEP);
return FEI;
}
/*
Function: Gets the current value of AFC (automated frequency correction)
Returns: AFC value in Hz
*/
int32_t SX1278FSK::getAFC()
{
int32_t AFC;
int16_t regval = (readRegister(REG_AFC_MSB)<<8) | readRegister(REG_AFC_LSB);
//Serial.printf("afcreg: %04x\n", regval);
AFC = (int32_t)(regval * SX127X_FSTEP);
return AFC;
}
/*
Function: Gets the current supply limit of the power amplifier, protecting battery chemistries.
Returns: Integer that determines if there has been any error
state = 2 --> The command has not been executed
state = 1 --> There has been an error while executing the command
state = 0 --> The command has been executed with no errors
Parameters:
rate: value to compute the maximum current supply. Maximum current is 45+5*'rate' [mA]
*/
int SX1278FSK::getMaxCurrent()
{
int value;
#if (SX1278FSK_debug_mode > 1)
Serial.println();
Serial.println(F("Starting 'getMaxCurrent'"));
#endif
value = readRegister(REG_OCP);
// extract only the OcpTrim value from the OCP register
value &= B00011111;
if( value <= 15 ) {
value = (45 + (5 * value));
} else if( value <= 27 ) {
value = (-30 + (10 * value));
} else {
value = 240;
}
#if (SX1278FSK_debug_mode > 1)
Serial.print(F("## Maximum current supply configured is "));
Serial.print(value, DEC);
Serial.println(F(" mA ##"));
Serial.println();
#endif
return value;
}
/*
Function: Limits the current supply of the power amplifier, protecting battery chemistries.
Returns: Integer that determines if there has been any error
state = 2 --> The command has not been executed
state = 1 --> There has been an error while executing the command
state = 0 --> The command has been executed with no errors
state = -1 --> Forbidden parameter value for this function
Parameters:
rate: value to compute the maximum current supply. Range: 0x00 to 0x1B. The
Maximum current is:
Imax = 45+5*OcpTrim [mA] if OcpTrim <= 15 (120 mA) /
Imax = -30+10*OcpTrim [mA] if 15 < OcpTrim <= 27 (130 to 240 mA)
Imax = 240mA for higher settings
*/
int8_t SX1278FSK::setMaxCurrent(uint8_t rate)
{
int8_t state = 2;
byte st0;
#if (SX1278FSK_debug_mode > 1)
Serial.println();
Serial.println(F("Starting 'setMaxCurrent'"));
#endif
// Maximum rate value = 0x1B, because maximum current supply = 240 mA
if (rate > 0x1B)
{
state = -1;
#if (SX1278FSK_debug_mode > 1)
Serial.print(F("** Maximum current supply is 240 mA, "));
Serial.println(F("so maximum parameter value must be 27 (DEC) or 0x1B (HEX) **"));
Serial.println();
#endif
}
else
{
// Enable Over Current Protection
rate |= B00100000;
state = 1;
st0 = readRegister(REG_OP_MODE); // Save the previous status
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE); // Set FSK Standby mode to write in registers
writeRegister(REG_OCP, rate); // Modifying maximum current supply
if(st0 != FSK_STANDBY_MODE) {
writeRegister(REG_OP_MODE, st0); // Getting back to previous status
}
state = 0;
}
return state;
}
/*
Function: Configures the module to receive information.
Returns: Integer that determines if there has been any error
state = 2 --> The command has not been executed
state = 1 --> There has been an error while executing the command
state = 0 --> The command has been executed with no errors
*/
uint8_t SX1278FSK::receive()
{
uint8_t state = 1;
#if (SX1278FSK_debug_mode > 1)
Serial.println();
Serial.println(F("Starting 'receive'"));
#endif
// TODO: Is there anything else to be done?
//
writeRegister(REG_OP_MODE, FSK_RX_MODE);
state = 0;
#if (SX1278FSK_debug_mode > 1)
Serial.println(F("## Receiving FSK mode activated with success ##"));
#endif
return state;
}
/*
Function: Configures the module to receive a packet
Returns: Integer that determines if there has been any error
state = 2 --> The command has not been executed
state = 1 --> There has been an error while executing the command
state = 0 --> The command has been executed with no errors
Parameters:
wait: timeout in ms
data: memory where to place received data
*/
uint8_t SX1278FSK::receivePacketTimeout(uint32_t wait, byte *data)
{
int di=0;
uint8_t state = 2;
unsigned long previous;
byte value = 0x00;
#if (SX1278FSK_debug_mode > 1)
Serial.println();
Serial.println(F("Starting 'receivePacketTimeout'"));
#endif
// set RX mode
state = receive();
if(state != 0) { return state; }
#if (SX1278FSK_debug_mode > 0)
Serial.println(F("RX mode sucessfully activated"));
#endif
previous = millis();
/// FSK mode
value = readRegister(REG_IRQ_FLAGS2);
byte ready=0;
// while not yet done or FIFO not yet empty
while( (!ready || bitRead(value,6)==0) && (millis() - previous < wait) )
{
if( bitRead(value,2)==1 ) ready=1;
if( bitRead(value, 6) == 0 ) { // FIFO not empty
data[di++] = readRegister(REG_FIFO);
// It's a bit of a hack.... get RSSI and AFC (a) at beginning of packet and
// for RS41 after about 0.5 sec. It might be more logical to put this decoder-specific
// code into RS41.cpp instead of this file... (maybe TODO?)
if(di==1 || di==290 ) {
int rssi=getRSSI();
int afc=getAFC();
#if 0
Serial.printf("Test(%d): RSSI=%d", rxtask.currentSonde, rssi/2);
Serial.print("Test: AFC="); Serial.println(afc);
#endif
sonde.sondeList[rxtask.currentSonde].rssi = rssi;
sonde.sondeList[rxtask.currentSonde].afc = afc;
if(rxtask.receiveResult==0xFFFF)
rxtask.receiveResult = RX_UPDATERSSI;
//sonde.si()->rssi = rssi;
//sonde.si()->afc = afc;
}
if(di>520) {
// TODO
Serial.println("TOO MUCH DATA");
break;
}
previous = millis(); // reset timeout after receiving data
} else {
delay(10);
}
value = readRegister(REG_IRQ_FLAGS2);
}
if( !ready || bitRead(value, 6)==0) {
#if 1&&(SX1278FSK_debug_mode > 0)
Serial.println(F("** The timeout has expired **"));
Serial.println();
#endif
sonde.si()->rssi = getRSSI();
writeRegister(REG_OP_MODE, FSK_STANDBY_MODE); // Setting standby FSK mode
return 1; // TIMEOUT
}
#if (SX1278FSK_debug_mode > 0)
Serial.println(F("## Packet received:"));
for(unsigned int i = 0; i < di; i++)
{
Serial.print(data[i], HEX); // Printing payload
Serial.print("|");
}
Serial.println(F(" ##"));
#endif
state = 0;
// Initializing flags
clearIRQFlags();
return state;
}
#if 0
/*
Function: It gets the temperature from the measurement block module.
Returns: Integer that determines if there has been any error
state = 2 --> The command has not been executed
state = 1 --> There has been an error while executing the command
state = 0 --> The command has been executed with no errors
*/
uint8_t SX1278FSK::getTemp()
{
byte st0;
uint8_t state = 2;
#if (SX1278FSK_debug_mode > 1)
Serial.println();
Serial.println(F("Starting 'getTemp'"));
#endif
st0 = readRegister(REG_OP_MODE); // Save the previous status
if( _modem == LORA )
{ // Allowing access to FSK registers while in LoRa standby mode
writeRegister(REG_OP_MODE, LORA_STANDBY_FSK_REGS_MODE);
}
state = 1;
// Saving temperature value
_temp = readRegister(REG_TEMP);
if( _temp & 0x80 ) // The SNR sign bit is 1
{
// Invert and divide by 4
_temp = ( ( ~_temp + 1 ) & 0xFF );
}
else
{
// Divide by 4
_temp = ( _temp & 0xFF );
}
#if (SX1278FSK_debug_mode > 1)
Serial.print(F("## Temperature is: "));
Serial.print(_temp);
Serial.println(F(" ##"));
Serial.println();
#endif
if( _modem == LORA )
{
writeRegister(REG_OP_MODE, st0); // Getting back to previous status
}
state = 0;
return state;
}
/*
Function: It prints the registers related to RX
Returns: Integer that determines if there has been any error
state = 2 --> The command has not been executed
state = 1 --> There has been an error while executing the command
state = 0 --> The command has been executed with no errors
*/
void SX1278FSK::showRxRegisters()
{
Serial.println(F("\n--- Show RX register ---"));
// variable
byte reg;
for(int i = 0x00; i < 0x80; i++)
{
reg = readRegister(i);
Serial.print(F("Reg 0x"));
Serial.print(i, HEX);
Serial.print(F(":"));
Serial.print(reg, HEX);
Serial.println();
delay(100);
}
Serial.println(F("------------------------"));
}
#endif
SX1278FSK sx1278 = SX1278FSK();
+278
View File
@@ -0,0 +1,278 @@
/*
* Functions for using SX127x in FSK mode (mainly receive)
* Copyright (C) 2019 Hansi Reiser, dl9rdz
*
* Partially based on the SX1278 libraray for managing Semtech modules
* Copyright (C) 2015 Wireless Open Source
* http://wirelessopensource.com
*
* SPDX-License-Identifier: LGPL-2.1+
*/
#ifndef SX1278FSK_h
#define SX1278FSK_h
/******************************************************************************
* Includes
******************************************************************************/
#include <stdlib.h>
#include <stdint.h>
#include <Arduino.h>
#include <SPI.h>
#ifndef inttypes_h
#include <inttypes.h>
#endif
/******************************************************************************
* Definitions & Declarations
*****************************************************************************/
#define SX127X_CRYSTAL_FREQ 32000000
#define SX127X_FSTEP (SX127X_CRYSTAL_FREQ*1.0/(1<<19))
#define SX1278FSK_debug_mode 0
#define SX1278_SS SS
//! MACROS //
#define bitRead(value, bit) (((value) >> (bit)) & 0x01) // read a bit
#define bitSet(value, bit) ((value) |= (1UL << (bit))) // set bit to '1'
#define bitClear(value, bit) ((value) &= ~(1UL << (bit))) // set bit to '0'
//! REGISTERS //
// FSK Commun LORA
#define REG_FIFO 0x00
#define REG_OP_MODE 0x01
#define REG_BITRATE_MSB 0x02
#define REG_BITRATE_LSB 0x03
#define REG_FDEV_MSB 0x04
#define REG_FDEV_LSB 0x05
#define REG_FRF_MSB 0x06
#define REG_FRF_MID 0x07
#define REG_FRF_LSB 0x08
#define REG_PA_CONFIG 0x09
#define REG_PA_RAMP 0x0A
#define REG_OCP 0x0B
#define REG_LNA 0x0C
#define REG_RX_CONFIG 0x0D
#define REG_FIFO_ADDR_PTR 0x0D
#define REG_RSSI_CONFIG 0x0E
#define REG_FIFO_TX_BASE_ADDR 0x0E
#define REG_RSSI_COLLISION 0x0F
#define REG_FIFO_RX_BASE_ADDR 0x0F
#define REG_RSSI_THRESH 0x10
#define REG_FIFO_RX_CURRENT_ADDR 0x10
#define REG_RSSI_VALUE_FSK 0x11
#define REG_IRQ_FLAGS_MASK 0x11
#define REG_RX_BW 0x12
#define REG_IRQ_FLAGS 0x12
#define REG_AFC_BW 0x13
#define REG_RX_NB_BYTES 0x13
#define REG_OOK_PEAK 0x14
#define REG_RX_HEADER_CNT_VALUE_MSB 0x14
#define REG_OOK_FIX 0x15
#define REG_RX_HEADER_CNT_VALUE_LSB 0x15
#define REG_OOK_AVG 0x16
#define REG_RX_PACKET_CNT_VALUE_MSB 0x16
#define REG_RX_PACKET_CNT_VALUE_LSB 0x17
#define REG_MODEM_STAT 0x18
#define REG_PKT_SNR_VALUE 0x19
#define REG_AFC_FEI 0x1A
#define REG_PKT_RSSI_VALUE 0x1A
#define REG_AFC_MSB 0x1B
#define REG_RSSI_VALUE_LORA 0x1B
#define REG_AFC_LSB 0x1C
#define REG_HOP_CHANNEL 0x1C
#define REG_FEI_MSB 0x1D
#define REG_MODEM_CONFIG1 0x1D
#define REG_FEI_LSB 0x1E
#define REG_MODEM_CONFIG2 0x1E
#define REG_PREAMBLE_DETECT 0x1F
#define REG_SYMB_TIMEOUT_LSB 0x1F
#define REG_RX_TIMEOUT1 0x20
#define REG_PREAMBLE_MSB_LORA 0x20
#define REG_RX_TIMEOUT2 0x21
#define REG_PREAMBLE_LSB_LORA 0x21
#define REG_RX_TIMEOUT3 0x22
#define REG_PAYLOAD_LENGTH_LORA 0x22
#define REG_RX_DELAY 0x23
#define REG_MAX_PAYLOAD_LENGTH 0x23
#define REG_OSC 0x24
#define REG_HOP_PERIOD 0x24
#define REG_PREAMBLE_MSB_FSK 0x25
#define REG_FIFO_RX_BYTE_ADDR 0x25
#define REG_PREAMBLE_LSB_FSK 0x26
#define REG_MODEM_CONFIG3 0x26
#define REG_SYNC_CONFIG 0x27
#define REG_SYNC_VALUE1 0x28
#define REG_LORA_FEI_MSB 0x28
#define REG_SYNC_VALUE2 0x29
#define REG_LORA_FEI_MID 0x29
#define REG_SYNC_VALUE3 0x2A
#define REG_LORA_FEI_LSB 0x2A
#define REG_SYNC_VALUE4 0x2B
#define REG_SYNC_VALUE5 0x2C
#define REG_RSSI_WIDEBAND 0x2C
#define REG_SYNC_VALUE6 0x2D
#define REG_SYNC_VALUE7 0x2E
#define REG_SYNC_VALUE8 0x2F
#define REG_PACKET_CONFIG1 0x30
#define REG_PACKET_CONFIG2 0x31
#define REG_DETECT_OPTIMIZE 0x31
#define REG_PAYLOAD_LENGTH_FSK 0x32
#define REG_NODE_ADRS 0x33
#define REG_INVERT_IQ 0x33
#define REG_BROADCAST_ADRS 0x34
#define REG_FIFO_THRESH 0x35
#define REG_SEQ_CONFIG1 0x36
#define REG_SEQ_CONFIG2 0x37
#define REG_DETECTION_THRESHOLD 0x37
#define REG_TIMER_RESOL 0x38
#define REG_TIMER1_COEF 0x39
#define REG_SYNC_WORD 0x39
#define REG_TIMER2_COEF 0x3A
#define REG_IMAGE_CAL 0x3B
#define REG_TEMP 0x3C
#define REG_LOW_BAT 0x3D
#define REG_IRQ_FLAGS1 0x3E
#define REG_IRQ_FLAGS2 0x3F
#define REG_DIO_MAPPING1 0x40
#define REG_DIO_MAPPING2 0x41
#define REG_VERSION 0x42
#define REG_PLL_HOP 0x44
#define REG_TCXO 0x4B
#define REG_PA_DAC 0x4D
#define REG_FORMER_TEMP 0x5B
#define REG_BIT_RATE_FRAC 0x5D
#define REG_AGC_REF 0x61
#define REG_AGC_THRESH1 0x62
#define REG_AGC_THRESH2 0x63
#define REG_AGC_THRESH3 0x64
#define REG_PLL 0x70
//FSK MODES:
const uint8_t FSK_SLEEP_MODE = 0x00;
const uint8_t FSK_STANDBY_MODE = 0x01;
const uint8_t FSK_TX_MODE = 0x03;
const uint8_t FSK_RX_MODE = 0x05;
/******************************************************************************
* SX1278FSK Class
* Functions and variables for managing SX127x transceiver chips in FSK mode,
* mainly for receiving radiosonde transmissions
******************************************************************************/
class SX1278FSK
{
public:
// class constructor
SX1278FSK();
// Turn on SX1278 module (return 0 on sucess, 1 otherwise)
uint8_t ON();
// Turn off SX1278 module
void OFF();
// Read internal register
byte readRegister(byte address);
// Write internal register
void writeRegister(byte address, byte data);
// Clear IRQ flags
void clearIRQFlags();
// Activate FSK mode (return 0 on success, 1 otherwise)
uint8_t setFSK();
// Configures bitrate register (closest approximation to requested bitrate)
uint8_t setBitrate(float bps);
float getBitrate();
// Configures RX bandwidth (next largest supported bandwith if exact value not possible)
uint8_t setRxBandwidth(float bps);
float getRxBandwidth();
// Configures AFC bandwidth (next largest supported bandwith if exact value not possible)
uint8_t setAFCBandwidth(float bps);
float getAFCBandwidth();
// Configures RX frequency (closest approximation to requested frequency)
uint8_t setFrequency(float freq);
float getFrequency();
int getLNAGain();
uint8_t setLNAGain(int gain);
uint8_t getRxConf();
uint8_t setRxConf(uint8_t conf);
uint8_t setSyncConf(uint8_t conf, int len, const uint8_t *syncpattern);
uint8_t getSyncConf();
uint8_t setPreambleDetect(uint8_t conf);
uint8_t getPreambleDetect();
uint8_t setPacketConfig(uint8_t conf1, uint8_t conf2);
uint16_t getPacketConfig();
// Get configured preamble length (used for TX only?)
uint16_t getPreambleLength();
// Sets the preamble length.
uint8_t setPreambleLength(uint16_t l);
// Gets the payload length (expected length for receive)
int getPayloadLength();
uint8_t setPayloadLength(int len);
// Get current RSSI value
int16_t getRSSI();
// Get current FEI (frequency error indication) value
int32_t getFEI();
// Get current AFC value
int32_t getAFC();
// Get the maximum current supply by the module.
int getMaxCurrent();
// Set the maximum current supply by the module.
int8_t setMaxCurrent(uint8_t rate);
// Put the module in reception mode.
//return '0' on success, '1' otherwise
uint8_t receive();
// Receive a packet
uint8_t receivePacketTimeout(uint32_t wait, byte *data);
#if 0
//! It gets the internal temperature of the module.
/*!
It stores in global '_temp' variable the module temperature.
\return '0' on success, '1' otherwise
*/
uint8_t getTemp();
//! It prints the registers related to RX via USB
/*!
* \return void
*/
void showRxRegisters();
#endif
};
extern SX1278FSK sx1278;
#endif
+347
View File
@@ -0,0 +1,347 @@
/* DFM decoder functions */
#include "DFM.h"
#include "SX1278FSK.h"
#include "Sonde.h"
#define DFM_DEBUG 1
#if DFM_DEBUG
#define DFM_DBG(x) x
#else
#define DFM_DBG(x)
#endif
int DFM::setup(float frequency, int inv)
{
inverse = inv;
#if DFM_DEBUG
Serial.printf("Setup sx1278 for DFM sonde (inv=%d)\n",inv);
#endif
if(sx1278.ON()!=0) {
DFM_DBG(Serial.println("Setting SX1278 power on FAILED"));
return 1;
}
if(sx1278.setFSK()!=0) {
DFM_DBG(Serial.println("Setting FSM mode FAILED"));
return 1;
}
if(sx1278.setBitrate(2500)!=0) {
DFM_DBG(Serial.println("Setting bitrate 2500bit/s FAILED"));
return 1;
}
#if DFM_DEBUG
float br = sx1278.getBitrate();
Serial.print("Exact bitrate is ");
Serial.println(br);
#endif
if(sx1278.setAFCBandwidth(sonde.config.dfm.agcbw)!=0) {
DFM_DBG(Serial.printf("Setting AFC bandwidth %d Hz FAILED", sonde.config.dfm.agcbw));
return 1;
}
if(sx1278.setRxBandwidth(sonde.config.dfm.rxbw)!=0) {
DFM_DBG(Serial.printf("Setting RX bandwidth to %d Hz FAILED", sonde.config.dfm.rxbw));
return 1;
}
// Enable auto-AFC, auto-AGC, RX Trigger by preamble
if(sx1278.setRxConf(0x1E)!=0) {
DFM_DBG(Serial.println("Setting RX Config FAILED"));
return 1;
}
// Set autostart_RX to 01, preamble 0, SYNC detect==on, syncsize=3 (==4 byte
//char header[] = "0110.0101 0110.0110 1010.0101 1010.1010";
const char *SYNC=inverse?"\x9A\x99\x5A\x55":"\x65\x66\xA5\xAA";
if(sx1278.setSyncConf(0x53, 4, (const uint8_t *)SYNC)!=0) {
DFM_DBG(Serial.println("Setting SYNC Config FAILED"));
return 1;
}
if(sx1278.setPreambleDetect(0xA8)!=0) {
DFM_DBG(Serial.println("Setting PreambleDetect FAILED"));
return 1;
}
// Packet config 1: fixed len, mancecer, no crc, no address filter
// Packet config 2: packet mode, no home ctrl, no beackn, msb(packetlen)=0)
if(sx1278.setPacketConfig(0x28, 0x40)!=0) {
DFM_DBG(Serial.println("Setting Packet config FAILED"));
return 1;
}
Serial.print("DFM: setting RX frequency to ");
Serial.println(frequency);
int retval = sx1278.setFrequency(frequency);
sx1278.clearIRQFlags();
DFM_DBG(Serial.println("Setting SX1278 config for DFM finished\n"); Serial.println());
return retval;
}
#define bitpick(value,bitpos) (((value)>>(7-(bitpos)))&0x01)
// Input: str: packed data, MSB first
void DFM::deinterleave(uint8_t *str, int L, uint8_t *block) {
int i, j;
for (j = 0; j < B; j++) { // L = 7 (CFG), 13 (DAT1, DAT2)
for (i = 0; i < L; i++) {
block[B*i+j] = bitpick( str[(L*j+i)/8], (L*j+i)&7 )?0:1;
}
}
}
uint32_t DFM::bits2val(const uint8_t *bits, int len) {
uint32_t val = 0;
for (int j = 0; j < len; j++) {
val |= (bits[j] << (len-1-j));
}
return val;
}
// Error correction for hamming code
// returns 0: ok >0: 1 error was corrected -1: uncorrectable error
int DFM::check(uint8_t code[8]) {
int i, j;
uint32_t synval = 0;
uint8_t syndrom[4];
int ret=0;
for (i = 0; i < 4; i++) {
syndrom[i] = 0;
for (j = 0; j < 8; j++) {
syndrom[i] ^= H[i][j] & code[j];
}
}
synval = bits2val(syndrom, 4);
if (synval) {
ret = -1;
for (j = 0; j < 8; j++) { // 1-bit-error
if (synval == He[j]) { // reicht auf databits zu pruefen, d.h.
ret = j+1; // (systematischer Code) He[0..3]
break;
}
}
}
else ret = 0;
if (ret > 0) code[ret-1] ^= 0x1;
return ret;
}
// Extended (8,4) Hamming code
// Return number of corrected bits, -1 if uncorrectable error
int DFM::hamming(uint8_t *ham, int L, uint8_t *sym) {
int i, j;
int ret = 0; // DFM: length L = 7 or 13
for (i = 0; i < L; i++) { // L bytes (4bit data, 4bit parity)
if (use_ecc) {
int res = check(ham+8*i);
if(ret>=0 && res>=0) ret += res; else ret=-1;
}
// systematic Hamming code: copy bits 0..3
for (j = 0; j < 4; j++) {
sym[4*i+j] = ham[8*i+j];
}
}
return ret;
}
DFM::DFM() {
}
void DFM::printRaw(const char *label, int len, int ret, const uint8_t *data)
{
Serial.print(label); Serial.print("(");
Serial.print(ret);
Serial.print("):");
int i;
for(i=0; i<len/2; i++) {
char str[10];
snprintf(str, 10, "%02X", data[i]);
Serial.print(str);
}
Serial.print(data[i]&0x0F, HEX);
Serial.print(" ");
}
void DFM::decodeCFG(uint8_t *cfg)
{
static int lowid, highid, idgood=0, type=0;
if((cfg[0]>>4)==0x06 && type==0) { // DFM-6 ID
lowid = ((cfg[0]&0x0F)<<20) | (cfg[1]<<12) | (cfg[2]<<4) | (cfg[3]&0x0f);
Serial.print("DFM-06 ID: "); Serial.print(lowid, HEX);
snprintf(sonde.si()->id, 10, "%x", lowid);
sonde.si()->validID = true;
}
if((cfg[0]>>4)==0x0A) { // DMF-9 ID
type=9;
if(cfg[3]==1) {
lowid = (cfg[1]<<8) | cfg[2];
idgood |= 1;
} else {
highid = (cfg[1]<<8) | cfg[2];
idgood |= 2;
}
if(idgood==3) {
uint32_t dfmid = (highid<<16) | lowid;
Serial.print("DFM-09 ID: "); Serial.print(dfmid);
snprintf(sonde.si()->ser, 10, "%d", dfmid);
// dxlAPRS sonde number (DF6 (why??) and 5 last digits of serial number as hex number
snprintf(sonde.si()->id, 9, "DF6%05X", dfmid&0xfffff);
sonde.si()->validID = true;
}
}
}
static int bitCount(int x) {
int m4 = 0x1 | (0x1<<8) | (0x1<<16) | (0x1<<24);
int m1 = 0xFF;
int s4 = (x&m4) + ((x>>1)&m4) + ((x>>2)&m4) + ((x>>3)&m4) + ((x>>4)&m4) + ((x>>5)&m4) + ((x>>6)&m4) + ((x>>7)&m4);
int s1 = (s4&m1) + ((s4>>8)&m1) + ((s4>>16)&m1) + ((s4>>24)&m1);
return s1;
}
static uint16_t MON[]={0,0,31,59,90,120,151,181,212,243,273,304,334};
void DFM::decodeDAT(uint8_t *dat)
{
Serial.print(" DAT["); Serial.print(dat[6]); Serial.print("]: ");
switch(dat[6]) {
case 0:
Serial.print("Packet counter: "); Serial.print(dat[3]);
sonde.si()->frame = dat[3];
break;
case 1:
{
int val = (((uint16_t)dat[4])<<8) + (uint16_t)dat[5];
Serial.print("UTC-msec: "); Serial.print(val);
sonde.si()->sec = val/1000;
uint32_t tmp = ((uint32_t)dat[0]<<24) + ((uint32_t)dat[1]<<16) + ((uint32_t)dat[2]<<8) + ((uint32_t)dat[3]);
sonde.si()->sats = bitCount(tmp); // maybe!?!?!?
}
break;
case 2:
{
float lat, vh;
lat = ((uint32_t)dat[0]<<24) + ((uint32_t)dat[1]<<16) + ((uint32_t)dat[2]<<8) + ((uint32_t)dat[3]);
vh = ((uint16_t)dat[4]<<8) + dat[5];
Serial.print("GPS-lat: "); Serial.print(lat*0.0000001);
Serial.print(", hor-V: "); Serial.print(vh*0.01);
sonde.si()->lat = lat*0.0000001;
sonde.si()->hs = vh*0.01;
sonde.si()->validPos |= 0x11;
}
break;
case 3:
{
float lon, dir;
lon = ((uint32_t)dat[0]<<24) + ((uint32_t)dat[1]<<16) + ((uint32_t)dat[2]<<8) + (uint32_t)dat[3];
dir = ((uint16_t)dat[4]<<8) + dat[5];
Serial.print("GPS-lon: "); Serial.print(lon*0.0000001);
Serial.print(", dir: "); Serial.print(dir*0.01);
sonde.si()->lon = lon*0.0000001;
sonde.si()->dir = dir*0.01;
sonde.si()->validPos |= 0x42;
}
break;
case 4:
{
float alt, vv;
alt = ((uint32_t)dat[0]<<24) + ((uint32_t)dat[1]<<16) + ((uint32_t)dat[2]<<8) + dat[3];
vv = (int16_t)( ((int16_t)dat[4]<<8) | dat[5] );
Serial.print("GPS-height: "); Serial.print(alt*0.01);
Serial.print(", vv: "); Serial.print(vv*0.01);
sonde.si()->alt = alt*0.01;
sonde.si()->vs = vv*0.01;
sonde.si()->validPos |= 0x0C;
}
break;
case 8:
{
int y = (dat[0]<<4) + (dat[1]>>4);
int m = dat[1]&0x0F;
int d = dat[2]>>3;
int h = ((dat[2]&0x07)<<2) + (dat[3]>>6);
int mi = (dat[3]&0x3F);
char buf[100];
snprintf(buf, 100, "%04d-%02d-%02d %02d:%02dz", y, m, d, h, mi);
Serial.print("Date: "); Serial.print(buf);
// convert to unix time
int tt = (y-1970)*365 + (y-1969)/4; // days since 1970
if(m<=12) { tt += MON[m]; if((y%4)==0 && m>2) tt++; }
tt = (tt+d-1)*(60*60*24) + h*3600 + mi*60;
sonde.si()->time = tt;
}
break;
default:
Serial.print("(?)");
break;
}
}
void DFM::bitsToBytes(uint8_t *bits, uint8_t *bytes, int len)
{
int i;
for(i=0; i<len*4; i++) {
//Serial.print(bits[i]?"1":"0");
bytes[i/8] = (bytes[i/8]<<1) | (bits[i]?1:0);
}
bytes[(i-1)/8] &= 0x0F;
}
int DFM::receive() {
byte data[1000]; // pending data from previous mode may write more than 33 bytes. TODO.
for(int i=0; i<2; i++) {
sx1278.setPayloadLength(33); // Expect 33 bytes (7+13+13 bytes)
sx1278.writeRegister(REG_OP_MODE, FSK_RX_MODE);
int e = sx1278.receivePacketTimeout(1000, data);
if(e) { return RX_TIMEOUT; } //if timeout... return 1
Serial.printf("inverse is %d\b", inverse);
if(!inverse) { for(int i=0; i<33; i++) { data[i]^=0xFF; } }
deinterleave(data, 7, hamming_conf);
deinterleave(data+7, 13, hamming_dat1);
deinterleave(data+20, 13, hamming_dat2);
int ret0 = hamming(hamming_conf, 7, block_conf);
int ret1 = hamming(hamming_dat1, 13, block_dat1);
int ret2 = hamming(hamming_dat2, 13, block_dat2);
byte byte_conf[4], byte_dat1[7], byte_dat2[7];
bitsToBytes(block_conf, byte_conf, 7);
bitsToBytes(block_dat1, byte_dat1, 13);
bitsToBytes(block_dat2, byte_dat2, 13);
printRaw("CFG", 7, ret0, byte_conf);
printRaw("DAT", 13, ret1, byte_dat1);
printRaw("DAT", 13, ret2, byte_dat2);
decodeCFG(byte_conf);
decodeDAT(byte_dat1);
decodeDAT(byte_dat2);
}
return RX_OK;
}
// moved to a single function in Sonde(). This function can be used for additional
// processing here, that takes too long for doing in the RX task loop
int DFM::waitRXcomplete() {
#if 0
int res=0;
uint32_t t0 = millis();
while( rxtask.receiveResult < 0 && millis()-t0 < 2000) { delay(50); }
if( rxtask.receiveResult<0 || rxtask.receiveResult==RX_TIMEOUT) {
res = RX_TIMEOUT;
} else if ( rxtask.receiveResult ==0) {
res = RX_OK;
} else {
res = RX_ERROR;
}
rxtask.receiveResult = -1;
Serial.printf("waitRXcomplete returning %d\n", res);
return res;
#endif
return 0;
}
DFM dfm = DFM();
+67
View File
@@ -0,0 +1,67 @@
/*
* DFM.h
* Functions for decoding DFM sondes with SX127x chips
* Copyright (C) 2019 Hansi Reiser, dl9rdz
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef DFM_h
#define DFM_h
#include <stdlib.h>
#include <stdint.h>
#include <Arduino.h>
#ifndef inttypes_h
#include <inttypes.h>
#endif
#define DFM_NORMAL 0
#define DFM_INVERSE 1
/* Main class */
class DFM
{
private:
int inverse=0;
void deinterleave(uint8_t *str, int L, uint8_t *block);
uint32_t bits2val(const uint8_t *bits, int len);
int check(uint8_t code[8]);
int hamming(uint8_t *ham, int L, uint8_t *sym);
void printRaw(const char *prefix, int len, int ret, const uint8_t* data);
void decodeCFG(uint8_t *cfg);
void decodeDAT(uint8_t *dat);
void bitsToBytes(uint8_t *bits, uint8_t *bytes, int len);
#define B 8
#define S 4
uint8_t hamming_conf[ 7*B]; // 7*8=56
uint8_t hamming_dat1[13*B]; // 13*8=104
uint8_t hamming_dat2[13*B];
uint8_t block_conf[ 7*S]; // 7*4=28
uint8_t block_dat1[13*S]; // 13*4=52
uint8_t block_dat2[13*S];
uint8_t H[4][8] = // extended Hamming(8,4) particy check matrix
{{ 0, 1, 1, 1, 1, 0, 0, 0},
{ 1, 0, 1, 1, 0, 1, 0, 0},
{ 1, 1, 0, 1, 0, 0, 1, 0},
{ 1, 1, 1, 0, 0, 0, 0, 1}};
uint8_t He[8] = { 0x7, 0xB, 0xD, 0xE, 0x8, 0x4, 0x2, 0x1}; // Spalten von H:
// 1-bit-error-Syndrome
public:
DFM();
// main decoder API
int setup(float frequency, int inverse);
int receive();
int waitRXcomplete();
int use_ecc = 1;
};
extern DFM dfm;
#endif
+367
View File
@@ -0,0 +1,367 @@
// SPDX-License-Identifier: GPL-3.0
// original source: https://github.com/Nkawu/TFT_22_ILI9225
#ifdef __AVR__
#include <avr/pgmspace.h>
#elif defined(ESP8266) || defined(ESP32)
#include <pgmspace.h>
#endif
#if defined(ARDUINO_ARCH_SAM) || defined(ARDUINO_ARCH_SAMD) || defined(ARDUINO_ARCH_STM32) || defined(ARDUINO_ARCH_STM32F1) || defined(STM32F1) || defined(ESP32)
#define PROGMEM
#define fontdatatype const char
#else
#define fontdatatype const uint8_t
#endif
//Font Generated by MikroElektronika GLCD Font Creator 1.2.0.0
//MikroElektronika 2011
//http://www.mikroe.com
//GLCD FontName : Terminal6x8
//GLCD FontSize : 6 x 8
fontdatatype Terminal6x8[] PROGMEM = {
0x06, 0x08, 0x20, 0x60,
0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char
0x05, 0x00, 0x00, 0x06, 0x5F, 0x06, 0x00, // Code for char !
0x06, 0x00, 0x07, 0x03, 0x00, 0x07, 0x03, // Code for char "
0x06, 0x00, 0x24, 0x7E, 0x24, 0x7E, 0x24, // Code for char #
0x05, 0x00, 0x24, 0x2B, 0x6A, 0x12, 0x00, // Code for char $
0x06, 0x00, 0x63, 0x13, 0x08, 0x64, 0x63, // Code for char %
0x06, 0x00, 0x36, 0x49, 0x56, 0x20, 0x50, // Code for char &
0x04, 0x00, 0x00, 0x07, 0x03, 0x00, 0x00, // Code for char '
0x04, 0x00, 0x00, 0x3E, 0x41, 0x00, 0x00, // Code for char (
0x04, 0x00, 0x00, 0x41, 0x3E, 0x00, 0x00, // Code for char )
0x06, 0x00, 0x08, 0x3E, 0x1C, 0x3E, 0x08, // Code for char *
0x06, 0x00, 0x08, 0x08, 0x3E, 0x08, 0x08, // Code for char +
0x04, 0x00, 0x00, 0xE0, 0x60, 0x00, 0x00, // Code for char ,
0x06, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, // Code for char -
0x04, 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, // Code for char .
0x06, 0x00, 0x20, 0x10, 0x08, 0x04, 0x02, // Code for char /
0x06, 0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E, // Code for char 0
0x05, 0x00, 0x00, 0x42, 0x7F, 0x40, 0x00, // Code for char 1
0x06, 0x00, 0x62, 0x51, 0x49, 0x49, 0x46, // Code for char 2
0x06, 0x00, 0x22, 0x49, 0x49, 0x49, 0x36, // Code for char 3
0x06, 0x00, 0x18, 0x14, 0x12, 0x7F, 0x10, // Code for char 4
0x06, 0x00, 0x2F, 0x49, 0x49, 0x49, 0x31, // Code for char 5
0x06, 0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30, // Code for char 6
0x06, 0x00, 0x01, 0x71, 0x09, 0x05, 0x03, // Code for char 7
0x06, 0x00, 0x36, 0x49, 0x49, 0x49, 0x36, // Code for char 8
0x06, 0x00, 0x06, 0x49, 0x49, 0x29, 0x1E, // Code for char 9
0x04, 0x00, 0x00, 0x6C, 0x6C, 0x00, 0x00, // Code for char :
0x04, 0x00, 0x00, 0xEC, 0x6C, 0x00, 0x00, // Code for char ;
0x05, 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, // Code for char <
0x06, 0x00, 0x24, 0x24, 0x24, 0x24, 0x24, // Code for char =
0x06, 0x00, 0x00, 0x41, 0x22, 0x14, 0x08, // Code for char >
0x06, 0x00, 0x02, 0x01, 0x59, 0x09, 0x06, // Code for char ?
0x06, 0x00, 0x3E, 0x41, 0x5D, 0x55, 0x1E, // Code for char @
0x06, 0x00, 0x7E, 0x11, 0x11, 0x11, 0x7E, // Code for char A
0x06, 0x00, 0x7F, 0x49, 0x49, 0x49, 0x36, // Code for char B
0x06, 0x00, 0x3E, 0x41, 0x41, 0x41, 0x22, // Code for char C
0x06, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x3E, // Code for char D
0x06, 0x00, 0x7F, 0x49, 0x49, 0x49, 0x41, // Code for char E
0x06, 0x00, 0x7F, 0x09, 0x09, 0x09, 0x01, // Code for char F
0x06, 0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A, // Code for char G
0x06, 0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F, // Code for char H
0x05, 0x00, 0x00, 0x41, 0x7F, 0x41, 0x00, // Code for char I
0x06, 0x00, 0x30, 0x40, 0x40, 0x40, 0x3F, // Code for char J
0x06, 0x00, 0x7F, 0x08, 0x14, 0x22, 0x41, // Code for char K
0x06, 0x00, 0x7F, 0x40, 0x40, 0x40, 0x40, // Code for char L
0x06, 0x00, 0x7F, 0x02, 0x04, 0x02, 0x7F, // Code for char M
0x06, 0x00, 0x7F, 0x02, 0x04, 0x08, 0x7F, // Code for char N
0x06, 0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E, // Code for char O
0x06, 0x00, 0x7F, 0x09, 0x09, 0x09, 0x06, // Code for char P
0x06, 0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E, // Code for char Q
0x06, 0x00, 0x7F, 0x09, 0x09, 0x19, 0x66, // Code for char R
0x06, 0x00, 0x26, 0x49, 0x49, 0x49, 0x32, // Code for char S
0x06, 0x00, 0x01, 0x01, 0x7F, 0x01, 0x01, // Code for char T
0x06, 0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F, // Code for char U
0x06, 0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F, // Code for char V
0x06, 0x00, 0x3F, 0x40, 0x3C, 0x40, 0x3F, // Code for char W
0x06, 0x00, 0x63, 0x14, 0x08, 0x14, 0x63, // Code for char X
0x06, 0x00, 0x07, 0x08, 0x70, 0x08, 0x07, // Code for char Y
0x05, 0x00, 0x71, 0x49, 0x45, 0x43, 0x00, // Code for char Z
0x05, 0x00, 0x00, 0x7F, 0x41, 0x41, 0x00, // Code for char [
0x06, 0x00, 0x02, 0x04, 0x08, 0x10, 0x20, // Code for char BackSlash
0x05, 0x00, 0x00, 0x41, 0x41, 0x7F, 0x00, // Code for char ]
0x06, 0x00, 0x04, 0x02, 0x01, 0x02, 0x04, // Code for char ^
0x06, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, // Code for char _
0x04, 0x00, 0x00, 0x03, 0x07, 0x00, 0x00, // Code for char `
0x06, 0x00, 0x20, 0x54, 0x54, 0x54, 0x78, // Code for char a
0x06, 0x00, 0x7F, 0x44, 0x44, 0x44, 0x38, // Code for char b
0x06, 0x00, 0x38, 0x44, 0x44, 0x44, 0x28, // Code for char c
0x06, 0x00, 0x38, 0x44, 0x44, 0x44, 0x7F, // Code for char d
0x06, 0x00, 0x38, 0x54, 0x54, 0x54, 0x08, // Code for char e
0x05, 0x00, 0x08, 0x7E, 0x09, 0x09, 0x00, // Code for char f
0x06, 0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C, // Code for char g
0x05, 0x00, 0x7F, 0x04, 0x04, 0x78, 0x00, // Code for char h
0x05, 0x00, 0x00, 0x00, 0x7D, 0x40, 0x00, // Code for char i
0x05, 0x00, 0x40, 0x80, 0x84, 0x7D, 0x00, // Code for char j
0x05, 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00, // Code for char k
0x05, 0x00, 0x00, 0x00, 0x7F, 0x40, 0x00, // Code for char l
0x06, 0x00, 0x7C, 0x04, 0x18, 0x04, 0x78, // Code for char m
0x05, 0x00, 0x7C, 0x04, 0x04, 0x78, 0x00, // Code for char n
0x06, 0x00, 0x38, 0x44, 0x44, 0x44, 0x38, // Code for char o
0x06, 0x00, 0xFC, 0x44, 0x44, 0x44, 0x38, // Code for char p
0x06, 0x00, 0x38, 0x44, 0x44, 0x44, 0xFC, // Code for char q
0x06, 0x00, 0x44, 0x78, 0x44, 0x04, 0x08, // Code for char r
0x06, 0x00, 0x08, 0x54, 0x54, 0x54, 0x20, // Code for char s
0x05, 0x00, 0x04, 0x3E, 0x44, 0x24, 0x00, // Code for char t
0x05, 0x00, 0x3C, 0x40, 0x20, 0x7C, 0x00, // Code for char u
0x06, 0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C, // Code for char v
0x06, 0x00, 0x3C, 0x60, 0x30, 0x60, 0x3C, // Code for char w
0x05, 0x00, 0x6C, 0x10, 0x10, 0x6C, 0x00, // Code for char x
0x05, 0x00, 0x9C, 0xA0, 0x60, 0x3C, 0x00, // Code for char y
0x05, 0x00, 0x64, 0x54, 0x54, 0x4C, 0x00, // Code for char z
0x05, 0x00, 0x08, 0x3E, 0x41, 0x41, 0x00, // Code for char {
0x04, 0x00, 0x00, 0x00, 0x77, 0x00, 0x00, // Code for char |
0x06, 0x00, 0x00, 0x41, 0x41, 0x3E, 0x08, // Code for char }
0x05, 0x00, 0x02, 0x01, 0x02, 0x01, 0x00, // Code for char ~
0x06, 0x00, 0x3C, 0x26, 0x23, 0x26, 0x3C // Code for char 
};
//Font Generated by MikroElektronika GLCD Font Creator 1.2.0.0
//MikroElektronika 2011
//http://www.mikroe.com
//GLCD FontName : Terminal11x16
//GLCD FontSize : 11 x 16
fontdatatype Terminal11x16[] PROGMEM = {
0x0B, 0x10, 0x20, 0x60,
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xFF, 0x33, 0xFF, 0x33, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char !
0x08, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char "
0x0B, 0x00, 0x02, 0x10, 0x1E, 0x90, 0x1F, 0xF0, 0x03, 0x7E, 0x02, 0x1E, 0x1E, 0x90, 0x1F, 0xF0, 0x03, 0x7E, 0x02, 0x1E, 0x00, 0x10, 0x00, // Code for char #
0x09, 0x00, 0x00, 0x78, 0x04, 0xFC, 0x0C, 0xCC, 0x0C, 0xFF, 0x3F, 0xFF, 0x3F, 0xCC, 0x0C, 0xCC, 0x0F, 0x88, 0x07, 0x00, 0x00, 0x00, 0x00, // Code for char $
0x0B, 0x00, 0x30, 0x38, 0x38, 0x38, 0x1C, 0x38, 0x0E, 0x00, 0x07, 0x80, 0x03, 0xC0, 0x01, 0xE0, 0x38, 0x70, 0x38, 0x38, 0x38, 0x1C, 0x00, // Code for char %
0x0A, 0x00, 0x00, 0x00, 0x1F, 0xB8, 0x3F, 0xFC, 0x31, 0xC6, 0x21, 0xE2, 0x37, 0x3E, 0x1E, 0x1C, 0x1C, 0x00, 0x36, 0x00, 0x22, 0x00, 0x00, // Code for char &
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x27, 0x00, 0x3F, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char '
0x08, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x03, 0xFC, 0x0F, 0xFE, 0x1F, 0x07, 0x38, 0x01, 0x20, 0x01, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char (
0x08, 0x00, 0x00, 0x00, 0x00, 0x01, 0x20, 0x01, 0x20, 0x07, 0x38, 0xFE, 0x1F, 0xFC, 0x0F, 0xF0, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char )
0x09, 0x00, 0x00, 0x98, 0x0C, 0xB8, 0x0E, 0xE0, 0x03, 0xF8, 0x0F, 0xF8, 0x0F, 0xE0, 0x03, 0xB8, 0x0E, 0x98, 0x0C, 0x00, 0x00, 0x00, 0x00, // Code for char *
0x09, 0x00, 0x00, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0xF0, 0x0F, 0xF0, 0x0F, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, // Code for char +
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xB8, 0x00, 0xF8, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char ,
0x09, 0x00, 0x00, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, // Code for char -
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x38, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char .
0x0B, 0x00, 0x18, 0x00, 0x1C, 0x00, 0x0E, 0x00, 0x07, 0x80, 0x03, 0xC0, 0x01, 0xE0, 0x00, 0x70, 0x00, 0x38, 0x00, 0x1C, 0x00, 0x0E, 0x00, // Code for char /
0x0B, 0xF8, 0x07, 0xFE, 0x1F, 0x06, 0x1E, 0x03, 0x33, 0x83, 0x31, 0xC3, 0x30, 0x63, 0x30, 0x33, 0x30, 0x1E, 0x18, 0xFE, 0x1F, 0xF8, 0x07, // Code for char 0
0x0A, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x30, 0x0C, 0x30, 0x0E, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, // Code for char 1
0x0B, 0x1C, 0x30, 0x1E, 0x38, 0x07, 0x3C, 0x03, 0x3E, 0x03, 0x37, 0x83, 0x33, 0xC3, 0x31, 0xE3, 0x30, 0x77, 0x30, 0x3E, 0x30, 0x1C, 0x30, // Code for char 2
0x0B, 0x0C, 0x0C, 0x0E, 0x1C, 0x07, 0x38, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xE7, 0x39, 0x7E, 0x1F, 0x3C, 0x0E, // Code for char 3
0x0B, 0xC0, 0x03, 0xE0, 0x03, 0x70, 0x03, 0x38, 0x03, 0x1C, 0x03, 0x0E, 0x03, 0x07, 0x03, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x03, 0x00, 0x03, // Code for char 4
0x0B, 0x3F, 0x0C, 0x7F, 0x1C, 0x63, 0x38, 0x63, 0x30, 0x63, 0x30, 0x63, 0x30, 0x63, 0x30, 0x63, 0x30, 0xE3, 0x38, 0xC3, 0x1F, 0x83, 0x0F, // Code for char 5
0x0B, 0xC0, 0x0F, 0xF0, 0x1F, 0xF8, 0x39, 0xDC, 0x30, 0xCE, 0x30, 0xC7, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x39, 0x80, 0x1F, 0x00, 0x0F, // Code for char 6
0x0B, 0x03, 0x00, 0x03, 0x00, 0x03, 0x00, 0x03, 0x30, 0x03, 0x3C, 0x03, 0x0F, 0xC3, 0x03, 0xF3, 0x00, 0x3F, 0x00, 0x0F, 0x00, 0x03, 0x00, // Code for char 7
0x0B, 0x00, 0x0F, 0xBC, 0x1F, 0xFE, 0x39, 0xE7, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xE7, 0x30, 0xFE, 0x39, 0xBC, 0x1F, 0x00, 0x0F, // Code for char 8
0x0B, 0x3C, 0x00, 0x7E, 0x00, 0xE7, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x38, 0xC3, 0x1C, 0xC3, 0x0E, 0xE7, 0x07, 0xFE, 0x03, 0xFC, 0x00, // Code for char 9
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x1C, 0x70, 0x1C, 0x70, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char :
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x9C, 0x70, 0xFC, 0x70, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char ;
0x09, 0x00, 0x00, 0xC0, 0x00, 0xE0, 0x01, 0xF0, 0x03, 0x38, 0x07, 0x1C, 0x0E, 0x0E, 0x1C, 0x07, 0x38, 0x03, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char <
0x0A, 0x00, 0x00, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x00, 0x00, // Code for char =
0x09, 0x00, 0x00, 0x03, 0x30, 0x07, 0x38, 0x0E, 0x1C, 0x1C, 0x0E, 0x38, 0x07, 0xF0, 0x03, 0xE0, 0x01, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char >
0x0A, 0x1C, 0x00, 0x1E, 0x00, 0x07, 0x00, 0x03, 0x00, 0x83, 0x37, 0xC3, 0x37, 0xE3, 0x00, 0x77, 0x00, 0x3E, 0x00, 0x1C, 0x00, 0x00, 0x00, // Code for char ?
0x0B, 0xF8, 0x0F, 0xFE, 0x1F, 0x07, 0x18, 0xF3, 0x33, 0xFB, 0x37, 0x1B, 0x36, 0xFB, 0x37, 0xFB, 0x37, 0x07, 0x36, 0xFE, 0x03, 0xF8, 0x01, // Code for char @
0x0A, 0x00, 0x38, 0x00, 0x3F, 0xE0, 0x07, 0xFC, 0x06, 0x1F, 0x06, 0x1F, 0x06, 0xFC, 0x06, 0xE0, 0x07, 0x00, 0x3F, 0x00, 0x38, 0x00, 0x00, // Code for char A
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xE7, 0x30, 0xFE, 0x39, 0xBC, 0x1F, 0x00, 0x0F, 0x00, 0x00, // Code for char B
0x0A, 0xF0, 0x03, 0xFC, 0x0F, 0x0E, 0x1C, 0x07, 0x38, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x07, 0x38, 0x0E, 0x1C, 0x0C, 0x0C, 0x00, 0x00, // Code for char C
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x07, 0x38, 0x0E, 0x1C, 0xFC, 0x0F, 0xF0, 0x03, 0x00, 0x00, // Code for char D
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0x03, 0x30, 0x03, 0x30, 0x00, 0x00, // Code for char E
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, // Code for char F
0x0A, 0xF0, 0x03, 0xFC, 0x0F, 0x0E, 0x1C, 0x07, 0x38, 0x03, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC7, 0x3F, 0xC6, 0x3F, 0x00, 0x00, // Code for char G
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char H
0x08, 0x00, 0x00, 0x00, 0x00, 0x03, 0x30, 0x03, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x30, 0x03, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char I
0x0A, 0x00, 0x0E, 0x00, 0x1E, 0x00, 0x38, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x38, 0xFF, 0x1F, 0xFF, 0x07, 0x00, 0x00, // Code for char J
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0xC0, 0x00, 0xE0, 0x01, 0xF0, 0x03, 0x38, 0x07, 0x1C, 0x0E, 0x0E, 0x1C, 0x07, 0x38, 0x03, 0x30, 0x00, 0x00, // Code for char K
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, // Code for char L
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0x1E, 0x00, 0x78, 0x00, 0xE0, 0x01, 0xE0, 0x01, 0x78, 0x00, 0x1E, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char M
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0x0E, 0x00, 0x38, 0x00, 0xF0, 0x00, 0xC0, 0x03, 0x00, 0x07, 0x00, 0x1C, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char N
0x0A, 0xF0, 0x03, 0xFC, 0x0F, 0x0E, 0x1C, 0x07, 0x38, 0x03, 0x30, 0x03, 0x30, 0x07, 0x38, 0x0E, 0x1C, 0xFC, 0x0F, 0xF0, 0x03, 0x00, 0x00, // Code for char O
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0x83, 0x01, 0x83, 0x01, 0x83, 0x01, 0x83, 0x01, 0x83, 0x01, 0xC7, 0x01, 0xFE, 0x00, 0x7C, 0x00, 0x00, 0x00, // Code for char P
0x0A, 0xF0, 0x03, 0xFC, 0x0F, 0x0E, 0x1C, 0x07, 0x38, 0x03, 0x30, 0x03, 0x36, 0x07, 0x3E, 0x0E, 0x1C, 0xFC, 0x3F, 0xF0, 0x33, 0x00, 0x00, // Code for char Q
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0x83, 0x01, 0x83, 0x01, 0x83, 0x03, 0x83, 0x07, 0x83, 0x0F, 0xC7, 0x1D, 0xFE, 0x38, 0x7C, 0x30, 0x00, 0x00, // Code for char R
0x0A, 0x3C, 0x0C, 0x7E, 0x1C, 0xE7, 0x38, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC7, 0x39, 0x8E, 0x1F, 0x0C, 0x0F, 0x00, 0x00, // Code for char S
0x09, 0x00, 0x00, 0x03, 0x00, 0x03, 0x00, 0x03, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x00, 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char T
0x0A, 0xFF, 0x07, 0xFF, 0x1F, 0x00, 0x38, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x38, 0xFF, 0x1F, 0xFF, 0x07, 0x00, 0x00, // Code for char U
0x0A, 0x07, 0x00, 0x3F, 0x00, 0xF8, 0x01, 0xC0, 0x0F, 0x00, 0x3E, 0x00, 0x3E, 0xC0, 0x0F, 0xF8, 0x01, 0x3F, 0x00, 0x07, 0x00, 0x00, 0x00, // Code for char V
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x1C, 0x00, 0x06, 0x80, 0x03, 0x80, 0x03, 0x00, 0x06, 0x00, 0x1C, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char W
0x0A, 0x03, 0x30, 0x0F, 0x3C, 0x1C, 0x0E, 0x30, 0x03, 0xE0, 0x01, 0xE0, 0x01, 0x30, 0x03, 0x1C, 0x0E, 0x0F, 0x3C, 0x03, 0x30, 0x00, 0x00, // Code for char X
0x0A, 0x03, 0x00, 0x0F, 0x00, 0x3C, 0x00, 0xF0, 0x00, 0xC0, 0x3F, 0xC0, 0x3F, 0xF0, 0x00, 0x3C, 0x00, 0x0F, 0x00, 0x03, 0x00, 0x00, 0x00, // Code for char Y
0x0A, 0x03, 0x30, 0x03, 0x3C, 0x03, 0x3E, 0x03, 0x33, 0xC3, 0x31, 0xE3, 0x30, 0x33, 0x30, 0x1F, 0x30, 0x0F, 0x30, 0x03, 0x30, 0x00, 0x00, // Code for char Z
0x08, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char [
0x0B, 0x0E, 0x00, 0x1C, 0x00, 0x38, 0x00, 0x70, 0x00, 0xE0, 0x00, 0xC0, 0x01, 0x80, 0x03, 0x00, 0x07, 0x00, 0x0E, 0x00, 0x1C, 0x00, 0x18, // Code for char BackSlash
0x08, 0x00, 0x00, 0x00, 0x00, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char ]
0x0B, 0x60, 0x00, 0x70, 0x00, 0x38, 0x00, 0x1C, 0x00, 0x0E, 0x00, 0x07, 0x00, 0x0E, 0x00, 0x1C, 0x00, 0x38, 0x00, 0x70, 0x00, 0x60, 0x00, // Code for char ^
0x0B, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, // Code for char _
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x7E, 0x00, 0x4E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char `
0x0A, 0x00, 0x1C, 0x40, 0x3E, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0xE0, 0x3F, 0xC0, 0x3F, 0x00, 0x00, // Code for char a
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0xC0, 0x30, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0xE0, 0x38, 0xC0, 0x1F, 0x80, 0x0F, 0x00, 0x00, // Code for char b
0x0A, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x38, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0xC0, 0x18, 0x80, 0x08, 0x00, 0x00, // Code for char c
0x0A, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x38, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0xE0, 0x30, 0xC0, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char d
0x0A, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x3B, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0xC0, 0x13, 0x80, 0x01, 0x00, 0x00, // Code for char e
0x08, 0xC0, 0x00, 0xC0, 0x00, 0xFC, 0x3F, 0xFE, 0x3F, 0xC7, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char f
0x0A, 0x80, 0x03, 0xC0, 0xC7, 0xE0, 0xCE, 0x60, 0xCC, 0x60, 0xCC, 0x60, 0xCC, 0x60, 0xCC, 0x60, 0xE6, 0xE0, 0x7F, 0xE0, 0x3F, 0x00, 0x00, // Code for char g
0x09, 0xFF, 0x3F, 0xFF, 0x3F, 0xC0, 0x00, 0x60, 0x00, 0x60, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xC0, 0x3F, 0x80, 0x3F, 0x00, 0x00, 0x00, 0x00, // Code for char h
0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0x30, 0xEC, 0x3F, 0xEC, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char i
0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xC0, 0x60, 0xC0, 0xEC, 0xFF, 0xEC, 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char j
0x09, 0x00, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x03, 0x80, 0x07, 0xC0, 0x0F, 0xE0, 0x1C, 0x60, 0x38, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char k
0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x03, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char l
0x0A, 0xE0, 0x3F, 0xC0, 0x3F, 0xE0, 0x00, 0xE0, 0x00, 0xC0, 0x3F, 0xC0, 0x3F, 0xE0, 0x00, 0xE0, 0x00, 0xC0, 0x3F, 0x80, 0x3F, 0x00, 0x00, // Code for char m
0x0A, 0x00, 0x00, 0xE0, 0x3F, 0xE0, 0x3F, 0x60, 0x00, 0x60, 0x00, 0x60, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xC0, 0x3F, 0x80, 0x3F, 0x00, 0x00, // Code for char n
0x0A, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x38, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0xE0, 0x38, 0xC0, 0x1F, 0x80, 0x0F, 0x00, 0x00, // Code for char o
0x0A, 0xE0, 0xFF, 0xE0, 0xFF, 0x60, 0x0C, 0x60, 0x18, 0x60, 0x18, 0x60, 0x18, 0x60, 0x18, 0xE0, 0x1C, 0xC0, 0x0F, 0x80, 0x07, 0x00, 0x00, // Code for char p
0x0A, 0x80, 0x07, 0xC0, 0x0F, 0xE0, 0x1C, 0x60, 0x18, 0x60, 0x18, 0x60, 0x18, 0x60, 0x18, 0x60, 0x0C, 0xE0, 0xFF, 0xE0, 0xFF, 0x00, 0x00, // Code for char q
0x0A, 0x00, 0x00, 0xE0, 0x3F, 0xE0, 0x3F, 0xC0, 0x00, 0x60, 0x00, 0x60, 0x00, 0x60, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xC0, 0x00, 0x00, 0x00, // Code for char r
0x08, 0xC0, 0x11, 0xE0, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x3F, 0x40, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char s
0x08, 0x60, 0x00, 0x60, 0x00, 0xFE, 0x1F, 0xFE, 0x3F, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char t
0x0A, 0xE0, 0x0F, 0xE0, 0x1F, 0x00, 0x38, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x18, 0xE0, 0x3F, 0xE0, 0x3F, 0x00, 0x00, // Code for char u
0x0A, 0x60, 0x00, 0xE0, 0x01, 0x80, 0x07, 0x00, 0x1E, 0x00, 0x38, 0x00, 0x38, 0x00, 0x1E, 0x80, 0x07, 0xE0, 0x01, 0x60, 0x00, 0x00, 0x00, // Code for char v
0x0A, 0xE0, 0x07, 0xE0, 0x1F, 0x00, 0x38, 0x00, 0x1C, 0xE0, 0x0F, 0xE0, 0x0F, 0x00, 0x1C, 0x00, 0x38, 0xE0, 0x1F, 0xE0, 0x07, 0x00, 0x00, // Code for char w
0x09, 0x60, 0x30, 0xE0, 0x38, 0xC0, 0x1D, 0x80, 0x0F, 0x00, 0x07, 0x80, 0x0F, 0xC0, 0x1D, 0xE0, 0x38, 0x60, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char x
0x09, 0x00, 0x00, 0x60, 0x00, 0xE0, 0x81, 0x80, 0xE7, 0x00, 0x7E, 0x00, 0x1E, 0x80, 0x07, 0xE0, 0x01, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char y
0x09, 0x60, 0x30, 0x60, 0x38, 0x60, 0x3C, 0x60, 0x36, 0x60, 0x33, 0xE0, 0x31, 0xE0, 0x30, 0x60, 0x30, 0x20, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char z
0x09, 0x00, 0x00, 0x80, 0x00, 0xC0, 0x01, 0xFC, 0x1F, 0x7E, 0x3F, 0x07, 0x70, 0x03, 0x60, 0x03, 0x60, 0x03, 0x60, 0x00, 0x00, 0x00, 0x00, // Code for char {
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char |
0x09, 0x00, 0x00, 0x03, 0x60, 0x03, 0x60, 0x03, 0x60, 0x07, 0x70, 0x7E, 0x3F, 0xFC, 0x1F, 0xC0, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char }
0x0A, 0x10, 0x00, 0x18, 0x00, 0x0C, 0x00, 0x04, 0x00, 0x0C, 0x00, 0x18, 0x00, 0x10, 0x00, 0x18, 0x00, 0x0C, 0x00, 0x04, 0x00, 0x00, 0x00, // Code for char ~
0x0A, 0x00, 0x0F, 0x80, 0x0F, 0xC0, 0x0C, 0x60, 0x0C, 0x30, 0x0C, 0x30, 0x0C, 0x60, 0x0C, 0xC0, 0x0C, 0x80, 0x0F, 0x00, 0x0F, 0x00, 0x00 // Code for char 
};
//Font Generated by MikroElektronika GLCD Font Creator 1.2.0.0
//MikroElektronika 2011
//http://www.mikroe.com
//GLCD FontName : Terminal12x16
//GLCD FontSize : 12 x 16
fontdatatype Terminal12x16[] PROGMEM = {
0x0C, 0x10, 0x20, 0x60,
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char
0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x00, 0xFF, 0x33, 0xFF, 0x33, 0xFF, 0x33, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char !
0x09, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x3C, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x3C, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char "
0x0C, 0x00, 0x02, 0x10, 0x1E, 0x90, 0x1F, 0xF0, 0x1F, 0xFE, 0x03, 0x7E, 0x1E, 0x9E, 0x1F, 0xF0, 0x1F, 0xFE, 0x03, 0x7E, 0x02, 0x1E, 0x00, 0x10, 0x00, // Code for char #
0x0A, 0x00, 0x00, 0x78, 0x04, 0xFC, 0x0C, 0xFC, 0x0C, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xCC, 0x0F, 0xCC, 0x0F, 0x88, 0x07, 0x00, 0x00, 0x00, 0x00, // Code for char $
0x0C, 0x00, 0x30, 0x38, 0x38, 0x38, 0x3C, 0x38, 0x1E, 0x38, 0x0F, 0x80, 0x07, 0xC0, 0x03, 0xE0, 0x39, 0xF0, 0x38, 0x78, 0x38, 0x3C, 0x38, 0x1C, 0x00, // Code for char %
0x0B, 0x00, 0x00, 0x00, 0x1F, 0xB8, 0x3F, 0xFC, 0x3F, 0xFE, 0x31, 0xE6, 0x37, 0xFE, 0x3F, 0x3E, 0x1E, 0x1C, 0x3E, 0x00, 0x36, 0x00, 0x22, 0x00, 0x00, // Code for char &
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x27, 0x00, 0x3F, 0x00, 0x3F, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char '
0x09, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x03, 0xFC, 0x0F, 0xFE, 0x1F, 0xFF, 0x3F, 0x07, 0x38, 0x01, 0x20, 0x01, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char (
0x09, 0x00, 0x00, 0x00, 0x00, 0x01, 0x20, 0x01, 0x20, 0x07, 0x38, 0xFF, 0x3F, 0xFE, 0x1F, 0xFC, 0x0F, 0xF0, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char )
0x0A, 0x00, 0x00, 0x98, 0x0C, 0xB8, 0x0E, 0xF8, 0x0F, 0xF8, 0x0F, 0xF8, 0x0F, 0xF8, 0x0F, 0xF8, 0x0F, 0xB8, 0x0E, 0x98, 0x0C, 0x00, 0x00, 0x00, 0x00, // Code for char *
0x0A, 0x00, 0x00, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0xF0, 0x0F, 0xF0, 0x0F, 0xF0, 0x0F, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, // Code for char +
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xB8, 0x00, 0xF8, 0x00, 0xF8, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char ,
0x0A, 0x00, 0x00, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x00, 0x00, 0x00, 0x00, // Code for char -
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x38, 0x00, 0x38, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char .
0x0C, 0x00, 0x18, 0x00, 0x1C, 0x00, 0x1E, 0x00, 0x0F, 0x80, 0x07, 0xC0, 0x03, 0xE0, 0x01, 0xF0, 0x00, 0x78, 0x00, 0x3C, 0x00, 0x1E, 0x00, 0x0E, 0x00, // Code for char /
0x0C, 0xF8, 0x07, 0xFE, 0x1F, 0xFE, 0x1F, 0x07, 0x3F, 0x83, 0x33, 0xC3, 0x31, 0xE3, 0x30, 0x73, 0x30, 0x3F, 0x38, 0xFE, 0x1F, 0xFE, 0x1F, 0xF8, 0x07, // Code for char 0
0x0B, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x30, 0x0C, 0x30, 0x0E, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, // Code for char 1
0x0C, 0x1C, 0x30, 0x1E, 0x38, 0x1F, 0x3C, 0x07, 0x3E, 0x03, 0x3F, 0x83, 0x37, 0xC3, 0x33, 0xE3, 0x31, 0xF7, 0x30, 0x7F, 0x30, 0x3E, 0x30, 0x1C, 0x30, // Code for char 2
0x0C, 0x0C, 0x0C, 0x0E, 0x1C, 0x0F, 0x3C, 0xC7, 0x38, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xE7, 0x39, 0xFF, 0x3F, 0x7E, 0x1F, 0x3C, 0x0E, // Code for char 3
0x0C, 0xC0, 0x03, 0xE0, 0x03, 0xF0, 0x03, 0x78, 0x03, 0x3C, 0x03, 0x1E, 0x03, 0x0F, 0x03, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x03, 0x00, 0x03, // Code for char 4
0x0C, 0x3F, 0x0C, 0x7F, 0x1C, 0x7F, 0x3C, 0x63, 0x38, 0x63, 0x30, 0x63, 0x30, 0x63, 0x30, 0x63, 0x30, 0xE3, 0x38, 0xE3, 0x3F, 0xC3, 0x1F, 0x83, 0x0F, // Code for char 5
0x0C, 0xC0, 0x0F, 0xF0, 0x1F, 0xF8, 0x3F, 0xFC, 0x39, 0xDE, 0x30, 0xCF, 0x30, 0xC7, 0x30, 0xC3, 0x30, 0xC3, 0x39, 0xC3, 0x3F, 0x80, 0x1F, 0x00, 0x0F, // Code for char 6
0x0C, 0x03, 0x00, 0x03, 0x00, 0x03, 0x00, 0x03, 0x30, 0x03, 0x3C, 0x03, 0x3F, 0xC3, 0x0F, 0xF3, 0x03, 0xFF, 0x00, 0x3F, 0x00, 0x0F, 0x00, 0x03, 0x00, // Code for char 7
0x0C, 0x00, 0x0F, 0xBC, 0x1F, 0xFE, 0x3F, 0xFF, 0x39, 0xE7, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xE7, 0x30, 0xFF, 0x39, 0xFE, 0x3F, 0xBC, 0x1F, 0x00, 0x0F, // Code for char 8
0x0C, 0x3C, 0x00, 0x7E, 0x00, 0xFF, 0x30, 0xE7, 0x30, 0xC3, 0x30, 0xC3, 0x38, 0xC3, 0x3C, 0xC3, 0x1E, 0xE7, 0x0F, 0xFF, 0x07, 0xFE, 0x03, 0xFC, 0x00, // Code for char 9
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x1C, 0x70, 0x1C, 0x70, 0x1C, 0x70, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char :
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x9C, 0x70, 0xFC, 0x70, 0xFC, 0x70, 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char ;
0x0A, 0x00, 0x00, 0xC0, 0x00, 0xE0, 0x01, 0xF0, 0x03, 0xF8, 0x07, 0x3C, 0x0F, 0x1E, 0x1E, 0x0F, 0x3C, 0x07, 0x38, 0x03, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char <
0x0B, 0x00, 0x00, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x60, 0x06, 0x00, 0x00, // Code for char =
0x0A, 0x00, 0x00, 0x03, 0x30, 0x07, 0x38, 0x0F, 0x3C, 0x1E, 0x1E, 0x3C, 0x0F, 0xF8, 0x07, 0xF0, 0x03, 0xE0, 0x01, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char >
0x0B, 0x1C, 0x00, 0x1E, 0x00, 0x1F, 0x00, 0x07, 0x00, 0x83, 0x37, 0xC3, 0x37, 0xE3, 0x37, 0xF7, 0x00, 0x7F, 0x00, 0x3E, 0x00, 0x1C, 0x00, 0x00, 0x00, // Code for char ?
0x0C, 0xF8, 0x0F, 0xFE, 0x1F, 0xFF, 0x1F, 0xF7, 0x3B, 0xFB, 0x37, 0xFB, 0x37, 0xFB, 0x37, 0xFB, 0x37, 0xFF, 0x37, 0xFF, 0x37, 0xFE, 0x03, 0xF8, 0x01, // Code for char @
0x0B, 0x00, 0x38, 0x00, 0x3F, 0xE0, 0x3F, 0xFC, 0x07, 0xFF, 0x06, 0x1F, 0x06, 0xFF, 0x06, 0xFC, 0x07, 0xE0, 0x3F, 0x00, 0x3F, 0x00, 0x38, 0x00, 0x00, // Code for char A
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xE7, 0x30, 0xFF, 0x39, 0xFE, 0x3F, 0xBC, 0x1F, 0x00, 0x0F, 0x00, 0x00, // Code for char B
0x0B, 0xF0, 0x03, 0xFC, 0x0F, 0xFE, 0x1F, 0x0F, 0x3C, 0x07, 0x38, 0x03, 0x30, 0x03, 0x30, 0x07, 0x38, 0x0F, 0x3C, 0x0E, 0x1C, 0x0C, 0x0C, 0x00, 0x00, // Code for char C
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x07, 0x38, 0x0F, 0x3C, 0xFE, 0x1F, 0xFC, 0x0F, 0xF0, 0x03, 0x00, 0x00, // Code for char D
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0x03, 0x30, 0x03, 0x30, 0x00, 0x00, // Code for char E
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, // Code for char F
0x0B, 0xF0, 0x03, 0xFC, 0x0F, 0xFE, 0x1F, 0x0F, 0x3C, 0x07, 0x38, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC7, 0x3F, 0xC7, 0x3F, 0xC6, 0x3F, 0x00, 0x00, // Code for char G
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char H
0x09, 0x00, 0x00, 0x00, 0x00, 0x03, 0x30, 0x03, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x30, 0x03, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char I
0x0B, 0x00, 0x0E, 0x00, 0x1E, 0x00, 0x3E, 0x00, 0x38, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x38, 0xFF, 0x3F, 0xFF, 0x1F, 0xFF, 0x07, 0x00, 0x00, // Code for char J
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xE0, 0x01, 0xF0, 0x03, 0xF8, 0x07, 0x3C, 0x0F, 0x1E, 0x1E, 0x0F, 0x3C, 0x07, 0x38, 0x03, 0x30, 0x00, 0x00, // Code for char K
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, // Code for char L
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x7E, 0x00, 0xF8, 0x01, 0xE0, 0x01, 0xF8, 0x01, 0x7E, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char M
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x3E, 0x00, 0xF8, 0x00, 0xF0, 0x03, 0xC0, 0x07, 0x00, 0x1F, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char N
0x0B, 0xF0, 0x03, 0xFC, 0x0F, 0xFE, 0x1F, 0x0F, 0x3C, 0x07, 0x38, 0x03, 0x30, 0x07, 0x38, 0x0F, 0x3C, 0xFE, 0x1F, 0xFC, 0x0F, 0xF0, 0x03, 0x00, 0x00, // Code for char O
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x83, 0x01, 0x83, 0x01, 0x83, 0x01, 0x83, 0x01, 0xC7, 0x01, 0xFF, 0x01, 0xFE, 0x00, 0x7C, 0x00, 0x00, 0x00, // Code for char P
0x0B, 0xF0, 0x03, 0xFC, 0x0F, 0xFE, 0x1F, 0x0F, 0x3C, 0x07, 0x38, 0x03, 0x36, 0x07, 0x3E, 0x0F, 0x3E, 0xFE, 0x3F, 0xFC, 0x3F, 0xF0, 0x33, 0x00, 0x00, // Code for char Q
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x83, 0x01, 0x83, 0x03, 0x83, 0x07, 0x83, 0x0F, 0xC7, 0x1F, 0xFF, 0x3D, 0xFE, 0x38, 0x7C, 0x30, 0x00, 0x00, // Code for char R
0x0B, 0x3C, 0x0C, 0x7E, 0x1C, 0xFF, 0x3C, 0xE7, 0x38, 0xC3, 0x30, 0xC3, 0x30, 0xC3, 0x30, 0xC7, 0x39, 0xCF, 0x3F, 0x8E, 0x1F, 0x0C, 0x0F, 0x00, 0x00, // Code for char S
0x0A, 0x00, 0x00, 0x03, 0x00, 0x03, 0x00, 0x03, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x00, 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char T
0x0B, 0xFF, 0x07, 0xFF, 0x1F, 0xFF, 0x3F, 0x00, 0x38, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x38, 0xFF, 0x3F, 0xFF, 0x1F, 0xFF, 0x07, 0x00, 0x00, // Code for char U
0x0B, 0x07, 0x00, 0x3F, 0x00, 0xFF, 0x01, 0xF8, 0x0F, 0xC0, 0x3F, 0x00, 0x3E, 0xC0, 0x3F, 0xF8, 0x0F, 0xFF, 0x01, 0x3F, 0x00, 0x07, 0x00, 0x00, 0x00, // Code for char V
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x1E, 0x80, 0x07, 0x80, 0x03, 0x80, 0x07, 0x00, 0x1E, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char W
0x0B, 0x03, 0x30, 0x0F, 0x3C, 0x1F, 0x3E, 0x3C, 0x0F, 0xF0, 0x03, 0xE0, 0x01, 0xF0, 0x03, 0x3C, 0x0F, 0x1F, 0x3E, 0x0F, 0x3C, 0x03, 0x30, 0x00, 0x00, // Code for char X
0x0B, 0x03, 0x00, 0x0F, 0x00, 0x3F, 0x00, 0xFC, 0x00, 0xF0, 0x3F, 0xC0, 0x3F, 0xF0, 0x3F, 0xFC, 0x00, 0x3F, 0x00, 0x0F, 0x00, 0x03, 0x00, 0x00, 0x00, // Code for char Y
0x0B, 0x03, 0x30, 0x03, 0x3C, 0x03, 0x3E, 0x03, 0x3F, 0xC3, 0x33, 0xE3, 0x31, 0xF3, 0x30, 0x3F, 0x30, 0x1F, 0x30, 0x0F, 0x30, 0x03, 0x30, 0x00, 0x00, // Code for char Z
0x09, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char [
0x0C, 0x0E, 0x00, 0x1E, 0x00, 0x3C, 0x00, 0x78, 0x00, 0xF0, 0x00, 0xE0, 0x01, 0xC0, 0x03, 0x80, 0x07, 0x00, 0x0F, 0x00, 0x1E, 0x00, 0x1C, 0x00, 0x18, // Code for char BackSlash
0x09, 0x00, 0x00, 0x00, 0x00, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0x03, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char ]
0x0C, 0x60, 0x00, 0x70, 0x00, 0x78, 0x00, 0x3C, 0x00, 0x1E, 0x00, 0x0F, 0x00, 0x0F, 0x00, 0x1E, 0x00, 0x3C, 0x00, 0x78, 0x00, 0x70, 0x00, 0x60, 0x00, // Code for char ^
0x0C, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x00, 0xC0, // Code for char _
0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x7E, 0x00, 0x7E, 0x00, 0x4E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char `
0x0B, 0x00, 0x1C, 0x40, 0x3E, 0x60, 0x3F, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0xE0, 0x3F, 0xE0, 0x3F, 0xC0, 0x3F, 0x00, 0x00, // Code for char a
0x0B, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xE0, 0x30, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0xE0, 0x38, 0xE0, 0x3F, 0xC0, 0x1F, 0x80, 0x0F, 0x00, 0x00, // Code for char b
0x0B, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x3F, 0xE0, 0x38, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0xE0, 0x38, 0xC0, 0x18, 0x80, 0x08, 0x00, 0x00, // Code for char c
0x0B, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x3F, 0xE0, 0x38, 0x60, 0x30, 0x60, 0x30, 0xE0, 0x30, 0xE0, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, // Code for char d
0x0B, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x3F, 0xE0, 0x3B, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0xE0, 0x33, 0xC0, 0x13, 0x80, 0x01, 0x00, 0x00, // Code for char e
0x09, 0xC0, 0x00, 0xC0, 0x00, 0xFC, 0x3F, 0xFE, 0x3F, 0xFF, 0x3F, 0xC7, 0x00, 0xC3, 0x00, 0xC3, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char f
0x0B, 0x80, 0x03, 0xC0, 0xC7, 0xE0, 0xCF, 0xE0, 0xCE, 0x60, 0xCC, 0x60, 0xCC, 0x60, 0xCC, 0x60, 0xEE, 0xE0, 0xFF, 0xE0, 0x7F, 0xE0, 0x3F, 0x00, 0x00, // Code for char g
0x0A, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0xE0, 0x00, 0x60, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xE0, 0x3F, 0xC0, 0x3F, 0x80, 0x3F, 0x00, 0x00, 0x00, 0x00, // Code for char h
0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x60, 0x30, 0xEC, 0x3F, 0xEC, 0x3F, 0xEC, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char i
0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xE0, 0x60, 0xC0, 0xEC, 0xFF, 0xEC, 0xFF, 0xEC, 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char j
0x0A, 0x00, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x80, 0x07, 0xC0, 0x0F, 0xE0, 0x1F, 0xE0, 0x3C, 0x60, 0x38, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char k
0x09, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x03, 0x30, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char l
0x0B, 0xE0, 0x3F, 0xE0, 0x3F, 0xE0, 0x3F, 0xE0, 0x00, 0xE0, 0x3F, 0xC0, 0x3F, 0xE0, 0x3F, 0xE0, 0x00, 0xE0, 0x3F, 0xC0, 0x3F, 0x80, 0x3F, 0x00, 0x00, // Code for char m
0x0B, 0x00, 0x00, 0xE0, 0x3F, 0xE0, 0x3F, 0xE0, 0x3F, 0x60, 0x00, 0x60, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xE0, 0x3F, 0xC0, 0x3F, 0x80, 0x3F, 0x00, 0x00, // Code for char n
0x0B, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x3F, 0xE0, 0x38, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0xE0, 0x38, 0xE0, 0x3F, 0xC0, 0x1F, 0x80, 0x0F, 0x00, 0x00, // Code for char o
0x0B, 0xE0, 0xFF, 0xE0, 0xFF, 0xE0, 0xFF, 0x60, 0x1C, 0x60, 0x18, 0x60, 0x18, 0x60, 0x18, 0xE0, 0x1C, 0xE0, 0x1F, 0xC0, 0x0F, 0x80, 0x07, 0x00, 0x00, // Code for char p
0x0B, 0x80, 0x07, 0xC0, 0x0F, 0xE0, 0x1F, 0xE0, 0x1C, 0x60, 0x18, 0x60, 0x18, 0x60, 0x18, 0x60, 0x1C, 0xE0, 0xFF, 0xE0, 0xFF, 0xE0, 0xFF, 0x00, 0x00, // Code for char q
0x0B, 0x00, 0x00, 0xE0, 0x3F, 0xE0, 0x3F, 0xE0, 0x3F, 0xE0, 0x00, 0x60, 0x00, 0x60, 0x00, 0x60, 0x00, 0xE0, 0x00, 0xE0, 0x00, 0xC0, 0x00, 0x00, 0x00, // Code for char r
0x09, 0xC0, 0x11, 0xE0, 0x33, 0xE0, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x33, 0x60, 0x3F, 0x60, 0x3F, 0x40, 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char s
0x09, 0x60, 0x00, 0x60, 0x00, 0xFE, 0x1F, 0xFE, 0x3F, 0xFE, 0x3F, 0x60, 0x30, 0x60, 0x30, 0x60, 0x30, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char t
0x0B, 0xE0, 0x0F, 0xE0, 0x1F, 0xE0, 0x3F, 0x00, 0x38, 0x00, 0x30, 0x00, 0x30, 0x00, 0x30, 0x00, 0x38, 0xE0, 0x3F, 0xE0, 0x3F, 0xE0, 0x3F, 0x00, 0x00, // Code for char u
0x0B, 0x60, 0x00, 0xE0, 0x01, 0xE0, 0x07, 0x80, 0x1F, 0x00, 0x3E, 0x00, 0x38, 0x00, 0x3E, 0x80, 0x1F, 0xE0, 0x07, 0xE0, 0x01, 0x60, 0x00, 0x00, 0x00, // Code for char v
0x0B, 0xE0, 0x07, 0xE0, 0x1F, 0xE0, 0x3F, 0x00, 0x3C, 0xE0, 0x1F, 0xE0, 0x0F, 0xE0, 0x1F, 0x00, 0x3C, 0xE0, 0x3F, 0xE0, 0x1F, 0xE0, 0x07, 0x00, 0x00, // Code for char w
0x0A, 0x60, 0x30, 0xE0, 0x38, 0xE0, 0x3D, 0xC0, 0x1F, 0x80, 0x0F, 0x80, 0x0F, 0xC0, 0x1F, 0xE0, 0x3D, 0xE0, 0x38, 0x60, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char x
0x0A, 0x00, 0x00, 0x60, 0x00, 0xE0, 0x81, 0xE0, 0xE7, 0x80, 0xFF, 0x00, 0x7E, 0x80, 0x1F, 0xE0, 0x07, 0xE0, 0x01, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char y
0x0A, 0x60, 0x30, 0x60, 0x38, 0x60, 0x3C, 0x60, 0x3E, 0x60, 0x37, 0xE0, 0x33, 0xE0, 0x31, 0xE0, 0x30, 0x60, 0x30, 0x20, 0x30, 0x00, 0x00, 0x00, 0x00, // Code for char z
0x0A, 0x00, 0x00, 0x80, 0x00, 0xC0, 0x01, 0xFC, 0x1F, 0xFE, 0x3F, 0x7F, 0x7F, 0x07, 0x70, 0x03, 0x60, 0x03, 0x60, 0x03, 0x60, 0x00, 0x00, 0x00, 0x00, // Code for char {
0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x3F, 0xFF, 0x3F, 0xFF, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char |
0x0A, 0x00, 0x00, 0x03, 0x60, 0x03, 0x60, 0x03, 0x60, 0x07, 0x70, 0x7F, 0x7F, 0xFE, 0x3F, 0xFC, 0x1F, 0xC0, 0x01, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char }
0x0B, 0x10, 0x00, 0x18, 0x00, 0x1C, 0x00, 0x0C, 0x00, 0x0C, 0x00, 0x1C, 0x00, 0x18, 0x00, 0x18, 0x00, 0x1C, 0x00, 0x0C, 0x00, 0x04, 0x00, 0x00, 0x00, // Code for char ~
0x0B, 0x00, 0x0F, 0x80, 0x0F, 0xC0, 0x0F, 0xE0, 0x0C, 0x70, 0x0C, 0x30, 0x0C, 0x70, 0x0C, 0xE0, 0x0C, 0xC0, 0x0F, 0x80, 0x0F, 0x00, 0x0F, 0x00, 0x00 // Code for char 
};
//Font Generated by MikroElektronika GLCD Font Creator 1.2.0.0
//MikroElektronika 2011
//http://www.mikroe.com
//GLCD FontName : Trebuchet_MS16x21
//GLCD FontSize : 16 x 21
fontdatatype Trebuchet_MS16x21[] PROGMEM = {
0x10, 0x15, 0x2E, 0x0D,
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char .
0x0C, 0x00, 0x00, 0x10, 0x00, 0x00, 0x1E, 0x00, 0xC0, 0x1F, 0x00, 0xF0, 0x1F, 0x00, 0xFE, 0x0F, 0x80, 0xFF, 0x03, 0xF0, 0x7F, 0x00, 0xFE, 0x0F, 0x00, 0xFF, 0x03, 0x00, 0x7F, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char /
0x10, 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0xF0, 0xFF, 0x03, 0xFC, 0xFF, 0x07, 0xFE, 0xFF, 0x0F, 0x3E, 0x80, 0x0F, 0x0F, 0x00, 0x1E, 0x07, 0x00, 0x1C, 0x07, 0x00, 0x1C, 0x07, 0x00, 0x1C, 0x0F, 0x00, 0x1E, 0x1F, 0x80, 0x0F, 0xFE, 0xFF, 0x0F, 0xFC, 0xFF, 0x07, 0xF8, 0xFF, 0x01, 0xC0, 0x7F, 0x00, // Code for char 0
0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x78, 0x00, 0x00, 0x38, 0x00, 0x00, 0x3C, 0x00, 0x00, 0xFE, 0xFF, 0x1F, 0xFE, 0xFF, 0x1F, 0xFF, 0xFF, 0x1F, 0xFF, 0xFF, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // Code for char 1
0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x18, 0x1E, 0x00, 0x1C, 0x0E, 0x00, 0x1F, 0x0F, 0x80, 0x1F, 0x07, 0xC0, 0x1F, 0x07, 0xF0, 0x1F, 0x07, 0xF8, 0x1D, 0x07, 0xFE, 0x1C, 0x0F, 0x3F, 0x1C, 0xFE, 0x1F, 0x1C, 0xFE, 0x0F, 0x1C, 0xFC, 0x03, 0x1C, 0xF8, 0x00, 0x1C, 0x00, 0x00, 0x1C, // Code for char 2
0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x00, 0x0E, 0x0E, 0x00, 0x0F, 0x0F, 0x00, 0x1E, 0x07, 0x00, 0x1C, 0x07, 0x07, 0x1C, 0x07, 0x07, 0x1C, 0x07, 0x07, 0x1C, 0x8F, 0x0F, 0x1E, 0xFF, 0x1F, 0x1E, 0xFE, 0xFD, 0x0F, 0xFC, 0xFD, 0x0F, 0x78, 0xF8, 0x07, 0x00, 0xF0, 0x01, 0x00, 0x00, 0x00, // Code for char 3
0x10, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0xF0, 0x00, 0x00, 0xF8, 0x00, 0x00, 0xFE, 0x00, 0x00, 0xEF, 0x00, 0x80, 0xE7, 0x00, 0xC0, 0xE3, 0x00, 0xF0, 0xE0, 0x00, 0x78, 0xE0, 0x00, 0xFC, 0xFF, 0x1F, 0xFE, 0xFF, 0x1F, 0xFF, 0xFF, 0x1F, 0xFF, 0xFF, 0x1F, 0x00, 0xE0, 0x00, 0x00, 0xE0, 0x00, // Code for char 4
0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0xFF, 0x03, 0x0F, 0xFF, 0x07, 0x0E, 0xFF, 0x03, 0x1C, 0xFF, 0x01, 0x1C, 0xC7, 0x01, 0x1C, 0xC7, 0x01, 0x1C, 0xC7, 0x01, 0x1E, 0xC7, 0x03, 0x1F, 0xC7, 0xFF, 0x0F, 0x87, 0xFF, 0x0F, 0x07, 0xFF, 0x07, 0x00, 0xFC, 0x01, 0x00, 0x00, 0x00, // Code for char 5
0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x80, 0xFF, 0x03, 0xE0, 0xFF, 0x07, 0xF0, 0xFF, 0x0F, 0xF8, 0x0F, 0x1E, 0x7C, 0x07, 0x1C, 0x3E, 0x07, 0x1C, 0x1E, 0x07, 0x1C, 0x0F, 0x07, 0x1C, 0x07, 0x0F, 0x1E, 0x02, 0xFE, 0x0F, 0x00, 0xFE, 0x0F, 0x00, 0xFC, 0x07, 0x00, 0xF0, 0x01, // Code for char 6
0x10, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x18, 0x07, 0x00, 0x1E, 0x07, 0xC0, 0x1F, 0x07, 0xF0, 0x1F, 0x07, 0xFC, 0x0F, 0x07, 0xFF, 0x01, 0xC7, 0x7F, 0x00, 0xF7, 0x0F, 0x00, 0xFF, 0x03, 0x00, 0xFF, 0x00, 0x00, 0x3F, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x03, 0x00, 0x00, // Code for char 7
0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x03, 0x78, 0xF8, 0x07, 0xFC, 0xFD, 0x0F, 0xFE, 0xFF, 0x0F, 0xFF, 0x1F, 0x1E, 0x8F, 0x0F, 0x1C, 0x07, 0x07, 0x1C, 0x07, 0x0F, 0x1C, 0x8F, 0x0F, 0x1C, 0xFF, 0x3F, 0x1E, 0xFE, 0xFD, 0x0F, 0xFE, 0xFD, 0x0F, 0x78, 0xF0, 0x07, 0x00, 0xE0, 0x03, // Code for char 8
0x0F, 0x00, 0x00, 0x00, 0xF0, 0x01, 0x00, 0xFC, 0x07, 0x00, 0xFE, 0x0F, 0x00, 0xFE, 0x0F, 0x08, 0x0F, 0x1E, 0x1C, 0x07, 0x1C, 0x1E, 0x07, 0x1C, 0x0F, 0x07, 0x9C, 0x0F, 0x07, 0xDC, 0x07, 0x0F, 0xFE, 0x03, 0xFE, 0xFF, 0x01, 0xFC, 0xFF, 0x00, 0xF8, 0x3F, 0x00, 0xE0, 0x0F, 0x00, 0x00, 0x00, 0x00, // Code for char 9
0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x0C, 0xC0, 0x03, 0x1E, 0xC0, 0x03, 0x1E, 0x80, 0x01, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 // Code for char :
};
+1711
View File
File diff suppressed because it is too large Load Diff
+165
View File
@@ -0,0 +1,165 @@
#ifndef Display_h
#define Display_h
#define FONT_LARGE 1
#define FONT_SMALL 0
#include <SPI.h>
//#include <TFT22_ILI9225.h>
#include "gfxfont.h"
#include <U8x8lib.h>
#include <SPIFFS.h>
#define WIDTH_AUTO 9999
struct DispEntry {
int16_t y;
int16_t x;
int16_t fmt, width;
uint16_t fg,bg;
void (*func)(DispEntry *de);
const char *extra;
};
#define GPSUSE_BASE 1
#define GPSUSE_DIST 2
#define GPSUSE_BEARING 4
struct DispInfo {
DispEntry *de;
uint8_t *actions;
int16_t *timeouts;
const char *label;
uint8_t usegps;
};
struct StatInfo {
uint8_t len;
uint8_t size;
};
// Now starting towards supporting different Display types / libraries
class RawDisplay {
public:
virtual void begin() = 0;
virtual void clear() = 0;
virtual void setFont(uint8_t fontindex) = 0;
virtual void getDispSize(uint8_t *height, uint8_t *width, uint8_t *lineskip, uint8_t *colskip) = 0;
virtual void drawString(uint8_t x, uint8_t y, const char *s, int16_t width=WIDTH_AUTO, uint16_t fg=0xffff, uint16_t bg=0 ) = 0;
virtual void drawTile(uint8_t x, uint8_t y, uint8_t cnt, uint8_t *tile_ptr) = 0;
virtual void drawTriangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t x3, uint16_t y3, uint16_t color, bool fill) = 0;
virtual void drawBitmap(uint16_t x1, uint16_t y1, const uint16_t* bitmap, int16_t w, int16_t h) = 0;
virtual void welcome() = 0;
virtual void drawIP(uint8_t x, uint8_t y, int16_t width=WIDTH_AUTO, uint16_t fg=0xffff, uint16_t bg=0 ) = 0;
virtual void drawQS(uint8_t x, uint8_t y, uint8_t len, uint8_t size, uint8_t *stat, uint16_t fg=0xffff, uint16_t bg=0) = 0;
};
class U8x8Display : public RawDisplay {
private:
U8X8 *u8x8 = NULL; // initialize later after reading config file
int _type;
const uint8_t **fontlist;
int nfonts;
public:
U8x8Display(int type = 0) { _type = type; }
void begin();
void clear();
void setFont(uint8_t fontindex);
void getDispSize(uint8_t *height, uint8_t *width, uint8_t *lineskip, uint8_t *colskip);
void drawString(uint8_t x, uint8_t y, const char *s, int16_t width=WIDTH_AUTO, uint16_t fg=0xffff, uint16_t bg=0);
void drawTile(uint8_t x, uint8_t y, uint8_t cnt, uint8_t *tile_ptr);
void drawTriangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t x3, uint16_t y3, uint16_t color, bool fill);
void drawBitmap(uint16_t x1, uint16_t y1, const uint16_t* bitmap, int16_t w, int16_t h);
void welcome();
void drawIP(uint8_t x, uint8_t y, int16_t width=WIDTH_AUTO, uint16_t fg=0xffff, uint16_t bg=0);
void drawQS(uint8_t x, uint8_t y, uint8_t len, uint8_t size, uint8_t *stat, uint16_t fg=0xffff, uint16_t bg=0);
};
class Display {
private:
void replaceLayouts(DispInfo *newlayout, int nnew);
int allocDispInfo(int entries, DispInfo *d, char *label);
void parseDispElement(char *text, DispEntry *de);
int xscale=13, yscale=22;
int fontsma=0, fontlar=1;
uint16_t colfg, colbg;
static void circ(int x, int y);
static int countEntries(File f);
void calcGPS();
void calcVbat();
void calcDurVol();
boolean gpsValid;
float gpsLat, gpsLon;
int gpsAlt;
int gpsDist; // -1: invalid
int gpsCourse, gpsDir, gpsBear; // 0..360; -1: invalid
boolean gpsCourseOld;
static const int LINEBUFLEN{ 255 };
static char lineBuf[LINEBUFLEN];
static const char *trim(char *s) {
char *ret = s;
while(*ret && isspace(*ret)) { ret++; }
int lastidx;
while(1) {
lastidx = strlen(ret)-1;
if(lastidx>=0 && isspace(ret[lastidx]))
ret[lastidx] = 0;
else
break;
}
return ret;
}
public:
void initFromFile();
int layoutIdx;
DispInfo *layout;
DispInfo *layouts;
int nLayouts;
static RawDisplay *rdis;
Display();
void init();
static char buf[17];
static void drawLat(DispEntry *de);
static void drawLon(DispEntry *de);
static void drawAz(DispEntry *de);
static void drawVBat(DispEntry *de);
static void drawDurVol(DispEntry *de);
static void drawAlt(DispEntry *de);
static void drawHS(DispEntry *de);
static void drawVS(DispEntry *de);
static void drawID(DispEntry *de);
static void drawRSSI(DispEntry *de);
static void drawQS(DispEntry *de);
static void drawType(DispEntry *de);
static void drawFreq(DispEntry *de);
static void drawAFC(DispEntry *de);
static void drawIP(DispEntry *de);
static void drawSite(DispEntry *de);
static void drawTelemetry(DispEntry *de);
static void drawKilltimer(DispEntry *de);
static void drawGPS(DispEntry *de);
static void drawText(DispEntry *de);
static void drawBatt(DispEntry *de);
static void drawString(DispEntry *de, const char *str);
void clearIP();
void setIP(const char *ip, bool AP);
void updateDisplayPos();
void updateDisplayPos2();
void updateDisplayAz();
void updateDisplayVBat();
void updateDisplayID();
void updateDisplayRSSI();
void updateStat();
void updateDisplayRXConfig();
void updateDisplayIP();
void updateDisplay();
void updateDisplayVBatt();
void setLayout(int layout);
};
extern Display disp;
#endif
+529
View File
@@ -0,0 +1,529 @@
/* M10 decoder functions */
#include "M10.h"
#include "SX1278FSK.h"
#include "rsc.h"
#include "Sonde.h"
#include <SPIFFS.h>
// well...
//#include "rs92gps.h"
#define M10_DEBUG 1
#if M10_DEBUG
#define M10_DBG(x) x
#else
#define M10_DBG(x)
#endif
static byte data1[512];
static byte *dataptr=data1;
static uint8_t rxbitc;
static uint16_t rxbyte;
static int rxp=0;
static int haveNewFrame = 0;
static int lastFrame = 0;
static int headerDetected = 0;
int M10::setup(float frequency)
{
#if M10_DEBUG
Serial.println("Setup sx1278 for M10 sonde");
#endif
//if(!initialized) {
//Gencrctab();
//initrsc();
// not here for now.... get_eph("/brdc.19n");
// initialized = true;
//}
if(sx1278.ON()!=0) {
M10_DBG(Serial.println("Setting SX1278 power on FAILED"));
return 1;
}
if(sx1278.setFSK()!=0) {
M10_DBG(Serial.println("Setting FSJ mode FAILED"));
return 1;
}
if(sx1278.setBitrate(9600)!=0) {
M10_DBG(Serial.println("Setting bitrate 9600bit/s FAILED"));
return 1;
}
#if M10_DEBUG
float br = sx1278.getBitrate();
Serial.print("Exact bitrate is ");
Serial.println(br);
#endif
if(sx1278.setAFCBandwidth(sonde.config.rs92.rxbw)!=0) {
M10_DBG(Serial.printf("Setting AFC bandwidth %d Hz FAILED", sonde.config.rs92.rxbw));
return 1;
}
if(sx1278.setRxBandwidth(sonde.config.rs92.rxbw)!=0) {
M10_DBG(Serial.printf("Setting RX bandwidth to %d Hz FAILED", sonde.config.rs92.rxbw));
return 1;
}
// Enable auto-AFC, auto-AGC, RX Trigger by preamble
if(sx1278.setRxConf(0x1E)!=0) {
M10_DBG(Serial.println("Setting RX Config FAILED"));
return 1;
}
// Set autostart_RX to 01, preamble 0, SYNC detect==on, syncsize=3 (==4 byte
//char header[] = "0110.0101 0110.0110 1010.0101 1010.1010";
//const char *SYNC="\x10\xB6\xCA\x11\x22\x96\x12\xF8";
//const char *SYNC="\x08\x6D\x53\x88\x44\x69\x48\x1F";
// was 0x57
//const char *SYNC="\x99\x9A";
#if 1
// version 1, working with continuous RX
const char *SYNC="\x66\x65";
if(sx1278.setSyncConf(0x70, 2, (const uint8_t *)SYNC)!=0) {
M10_DBG(Serial.println("Setting SYNC Config FAILED"));
return 1;
}
//if(sx1278.setPreambleDetect(0xA8)!=0) {
if((sx1278.setPreambleDetect(0x9F)!=0)&&((sx1278.setPreambleDetect(0xAF)!=0))) {
M10_DBG(Serial.println("Setting PreambleDetect FAILED"));
return 1;
}
#endif
#if 0
// version 2, with per-packet rx start, untested
// header is 2a 10 65, i.e. with lsb first
// 0 0101 0100 1 0 0000 1000 1 0 1010 0110 1
// 10 10011001 10011010 01 10 10101010 01101010 01 10 01100110 10010110 01
// preamble 0x6A 0x66 0x6A
// i.e. preamble detector on (0x80), preamble detector size 1 (0x00), preample chip errors??? (0x0A)
// after 2a2a2a2a2a1065
if(sx1278.setPreambleDetect(0xA8)!=0) {
M10_DBG(Serial.println("Setting PreambleDetect FAILED"));
return 1;
}
// sync config: ato restart (01), preamble polarity AA (0), sync on (1), resevered (0), syncsize 2+1 (010) => 0x52
const char *SYNC="\x6A\x66\x69";
if(sx1278.setSyncConf(0x52, 3, (const uint8_t *)SYNC)!=0) {
M10_DBG(Serial.println("Setting SYNC Config FAILED"));
return 1;
}
// payload length is ((240 - 7)*10 +6)/8 = 292
#endif
// Packet config 1: fixed len, no mancecer, no crc, no address filter
// Packet config 2: packet mode, no home ctrl, no beackn, msb(packetlen)=0)
if(sx1278.setPacketConfig(0x08, 0x40)!=0) {
M10_DBG(Serial.println("Setting Packet config FAILED"));
return 1;
}
Serial.print("M10: setting RX frequency to ");
Serial.println(frequency);
int res = sx1278.setFrequency(frequency);
// enable RX
sx1278.setPayloadLength(0); // infinite for now...
//sx1278.setPayloadLength(292);
sx1278.writeRegister(REG_OP_MODE, FSK_RX_MODE);
#if M10_DEBUG
M10_DBG(Serial.println("Setting SX1278 config for M10 finished\n"); Serial.println());
#endif
return res;
}
#if 0
int M10::setFrequency(float frequency) {
Serial.print("M10: setting RX frequency to ");
Serial.println(frequency);
int res = sx1278.setFrequency(frequency);
// enable RX
sx1278.setPayloadLength(0); // infinite for now...
sx1278.writeRegister(REG_OP_MODE, FSK_RX_MODE);
return res;
}
#endif
#if 0
uint32_t M10::bits2val(const uint8_t *bits, int len) {
uint32_t val = 0;
for (int j = 0; j < len; j++) {
val |= (bits[j] << (len-1-j));
}
return val;
}
#endif
M10::M10() {
}
#define M10_FRAMELEN 101
#define M10_CRCPOS 99
void M10::printRaw(uint8_t *data, int len)
{
char buf[3];
int i;
for(i=0; i<len; i++) {
snprintf(buf, 3, "%02X ", data[i]);
Serial.print(buf);
}
Serial.println();
}
static int update_checkM10(int c, uint8_t b) {
int c0, c1, t, t6, t7, s;
c1 = c & 0xFF;
// B
b = (b >> 1) | ((b & 1) << 7);
b ^= (b >> 2) & 0xFF;
// A1
t6 = ( c & 1) ^ ((c >> 2) & 1) ^ ((c >> 4) & 1);
t7 = ((c >> 1) & 1) ^ ((c >> 3) & 1) ^ ((c >> 5) & 1);
t = (c & 0x3F) | (t6 << 6) | (t7 << 7);
// A2
s = (c >> 7) & 0xFF;
s ^= (s >> 2) & 0xFF;
c0 = b ^ t ^ s;
return ((c1 << 8) | c0) & 0xFFFF;
}
static bool checkM10crc(uint8_t *msg) {
int i, cs, cs1;
cs = 0;
for (i = 0; i < M10_CRCPOS; i++) {
cs = update_checkM10(cs, msg[i]);
}
cs = cs & 0xFFFF;
cs1 = (msg[M10_CRCPOS] << 8) | msg[M10_CRCPOS+1];
return (cs1 == cs);
}
typedef uint32_t SET256[8];
static SET256 sondeudp_VARSET = {0x03BBBBF0UL,0x80600000UL,0x06A001A0UL,
0x0000001CUL,0x00000000UL,0x00000000UL,0x00000000UL,
0x00000000UL};
// VARSET=SET256{4..9,11..13,15..17,19..21,23..25,53..54,63,69,71,72,85,87,89,90,98..100};
static uint8_t fixcnt[M10_FRAMELEN];
static uint8_t fixbytes[M10_FRAMELEN];
static int32_t getint32(uint8_t *data) {
return (int32_t)( data[3]|(data[2]<<8)|(data[1]<<16)|(data[0]<<24) );
}
static int16_t getint16(uint8_t *data) {
return (int16_t)(data[1]|((uint16_t)data[0]<<8));
}
static char dez(uint8_t nr) {
nr = nr%10;
return '0'+nr;
}
static char hex(uint8_t nr) {
nr = nr&0x0f;
if(nr<10) return '0'+nr;
else return 'A'+nr-10;
}
const static float DEGMUL = 1.0/0xB60B60;
#define VMUL 0.005
#ifndef PI
#define PI (3.1415926535897932384626433832795)
#endif
#define RAD (PI/180)
// ret: 1=frame ok; 2=frame with errors; 0=ignored frame (m10dop-alternativ)
int M10::decodeframeM10(uint8_t *data) {
int repairstep = 16;
int repl = 0;
bool crcok;
// error correction, inspired by oe5dxl's sondeudp
do {
crcok = checkM10crc(data);
if(crcok) break;
repl = 0;
for(int i=0; i<M10_CRCPOS; i++) {
if( ((sondeudp_VARSET[i/32]&(1<<(i%32))) != 1) && (fixcnt[i]>=repairstep) ) {
repl++;
data[i] = fixbytes[i];
}
}
repairstep >>= 1;
} while(repairstep>0);
if(crcok) {
for(int i=0; i<M10_CRCPOS; i++) {
if(fixbytes[i]==data[i] &&fixcnt[i]<255) fixcnt[i]++;
else { fixcnt[i]=0; fixbytes[i]=data[i]; }
}
}
Serial.println(crcok?"CRC OK":"CRC NOT OK");
//M10 0x9F M10Plus 0xAF M20 0x20
if((data[1]==0x9F && data[2]==0x20) || (data[1]==0xAF && data[2]==0x20)) {
Serial.println("Decoding...");
// Its a M10
// getid...
char ids[11];
ids[0] = 'M';
ids[1] = 'E';
ids[2] = hex(data[95]/16);
ids[3] = hex(data[95]);
ids[4] = hex(data[93]);
uint32_t id = data[96] + data[97]*256;
ids[5] = hex(id/4096);
ids[6] = hex(id/256);
ids[7] = hex(id/16);
ids[8] = hex(id);
ids[9] = 0;
strncpy(sonde.si()->id, ids, 10);
ids[0] = hex(data[95]/16);
ids[1] = dez((data[95]&0x0f)/10);
ids[2] = dez((data[95]&0x0f));
ids[3] = dez(data[93]);
ids[4] = dez(id>>13);
id &= 0x1fff;
ids[5] = dez(id/1000);
ids[6] = dez((id/100)%10);
ids[7] = dez((id/10)%10);
ids[8] = dez(id%10);
strncpy(sonde.si()->ser, ids, 10);
sonde.si()->validID = true;
Serial.printf("ID is %s [%02x %02x %d]\n", ids, data[95], data[93], id);
// ID printed on sonde is ...-.-abbbb, with a=id>>13, bbbb=id&0x1fff in decimal
// position data
sonde.si()->lat = getint32(data+14) * DEGMUL;
sonde.si()->lon = getint32(data+18) * DEGMUL;
sonde.si()->alt = getint32(data+22) * 0.001;
float ve = getint16(data+4)*VMUL;
float vn = getint16(data+6)*VMUL;
sonde.si()->vs = getint16(data+8) * VMUL;
sonde.si()->hs = sqrt(ve*ve+vn*vn);
float dir = atan2(vn, ve)*(1.0/RAD);
if(dir<0) dir+=360;
sonde.si()->dir = dir;
sonde.si()->validPos = 0x3f;
uint32_t gpstime = getint32(data+10);
uint16_t gpsweek = getint16(data+32);
// UTC is GPSTIME - 18s (24*60*60-18 = 86382)
// one week = 7*24*60*60 = 604800 seconds
// unix epoch starts jan 1st 1970 0:00
// gps time starts jan 6, 1980 0:00. thats 315964800 epoch seconds.
// subtracting 86400 yields 315878400UL
sonde.si()->time = (gpstime/1000) + 86382 + gpsweek*604800 + 315878400UL;
sonde.si()->validTime = true;
} else {
Serial.printf("data is %02x %02x %02x\n", data[0], data[1], data[2]);
return 0;
}
return crcok?1:2;
}
static uint32_t rxdata;
static bool rxsearching=true;
// search for
// //101001100110011010011010011001100110100110101010100110101001
// //1010011001100110100110100110 0110.0110 1001.1010 1010.1001 1010.1001 => 0x669AA9A9
void M10::processM10data(uint8_t dt)
{
for(int i=0; i<8; i++) {
uint8_t d = (dt&0x80)?1:0;
dt <<= 1;
rxdata = (rxdata<<1) | d;
//uint8_t value = ((rxdata>>1)^rxdata)&0x01;
//if((rxbitc&1)==1) { rxbyte = (rxbyte>>1) + ((value)<<8); } // mancester decoded data
//rxbyte = (rxbyte>>1) | (d<<8);
if( (rxbitc&1)==0 ) {
// "bit1"
rxbyte = (rxbyte<<1) | d;
} else {
// "bit2" ==> 01 or 10 => 1, otherweise => 0
rxbyte = rxbyte ^ d;
}
//
if(rxsearching) {
if( rxdata == 0xcccca64c || rxdata == 0x333359b3 ) {
rxsearching = false;
rxbitc = 0;
rxp = 0;
#if 1
int rssi=sx1278.getRSSI();
int fei=sx1278.getFEI();
int afc=sx1278.getAFC();
Serial.print("Test: RSSI="); Serial.print(rssi);
Serial.print(" FEI="); Serial.print(fei);
Serial.print(" AFC="); Serial.println(afc);
sonde.si()->rssi = rssi;
sonde.si()->afc = afc;
#endif
}
} else {
rxbitc = (rxbitc+1)%16; // 16;
if(rxbitc == 0) { // got 8 data bit
//Serial.printf("%03x ",rxbyte);
dataptr[rxp++] = rxbyte&0xff; // (rxbyte>>1)&0xff;
#if 0
if(rxp==7 && dataptr[6] != 0x65) {
Serial.printf("wrong start: %02x\n",dataptr[6]);
rxsearching = true;
}
#endif
if(rxp>=M10_FRAMELEN) {
rxsearching = true;
haveNewFrame = decodeframeM10(dataptr);
}
}
}
}
}
int M10::receive() {
unsigned long t0 = millis();
Serial.printf("M10::receive() start at %ld\n",t0);
while( millis() - t0 < 1000 ) {
uint8_t value = sx1278.readRegister(REG_IRQ_FLAGS2);
if ( bitRead(value, 7) ) {
Serial.println("FIFO full");
}
if ( bitRead(value, 4) ) {
Serial.println("FIFO overflow");
}
if ( bitRead(value, 2) == 1 ) {
Serial.println("FIFO: ready()");
sx1278.clearIRQFlags();
}
if(bitRead(value, 6) == 0) { // while FIFO not empty
byte data = sx1278.readRegister(REG_FIFO);
//Serial.printf("%02x",data);
processM10data(data);
value = sx1278.readRegister(REG_IRQ_FLAGS2);
} else {
if(headerDetected) {
t0 = millis(); // restart timer... don't time out if header detected...
headerDetected = 0;
}
if(haveNewFrame) {
Serial.printf("M10::receive(): new frame complete after %ldms\n", millis()-t0);
printRaw(dataptr, M10_FRAMELEN);
int retval = haveNewFrame==1 ? RX_OK: RX_ERROR;
haveNewFrame = 0;
return retval;
}
delay(2);
}
}
Serial.printf("M10::receive() timed out\n");
return RX_TIMEOUT; // TODO RX_OK;
}
#define M10MAXLEN (240)
int M10::waitRXcomplete() {
// called after complete...
#if 0
Serial.printf("decoding frame %d\n", lastFrame);
print_frame(lastFrame==1?data1:data2, 240);
SondeInfo *si = sonde.sondeList+rxtask.receiveSonde;
si->lat = gpx.lat;
si->lon = gpx.lon;
si->alt = gpx.alt;
si->vs = gpx.vU;
si->hs = gpx.vH;
si->dir = gpx.vD;
si->validPos = 0x3f;
memcpy(si->id, gpx.id, 9);
si->validID = true;
int res=0;
uint32_t t0 = millis();
while( rxtask.receiveResult == 0xFFFF && millis()-t0 < 2000) { delay(20); }
if( rxtask.receiveResult<0 || rxtask.receiveResult==RX_TIMEOUT) {
res = RX_TIMEOUT;
} else if ( rxtask.receiveResult==0) {
res = RX_OK;
} else {
res = RX_ERROR;
}
rxtask.receiveResult = 0xFFFF;
Serial.printf("M10::waitRXcomplete returning %d (%s)\n", res, RXstr[res]);
return res;
#endif
return 0;
}
#if 0
int oldwaitRXcomplete() {
Serial.println("M10: receive frame...\n");
sx1278receiveData = true;
delay(6000); // done in other task....
//sx1278receiveData = false;
#if 0
//sx1278.setPayloadLength(518-8); // Expect 320-8 bytes or 518-8 bytes (8 byte header)
//sx1278.setPayloadLength(0); // infinite for now...
////// test code for continuous reception
// sx1278.receive(); /// active FSK RX mode -- already done above...
uint8_t value = sx1278.readRegister(REG_IRQ_FLAGS2);
unsigned long previous = millis();
byte ready=0;
uint32_t wait = 8000;
// while not yet done or FIFO not yet empty
// bit 6: FIFO Empty
// bit 2 payload ready
int by=0;
while( (!ready || bitRead(value,6)==0) && (millis() - previous < wait) )
{
if( bitRead(value, 7) ) { Serial.println("FIFO full"); }
if( bitRead(value, 4) ) { Serial.println("FIFO overflow"); }
if( bitRead(value,2)==1 ) ready=1;
if( bitRead(value, 6) == 0 ) { // FIFO not empty
byte data = sx1278.readRegister(REG_FIFO);
process8N1data(data);
by++;
#if 0
if(di==1) {
int rssi=getRSSI();
int fei=getFEI();
int afc=getAFC();
Serial.print("Test: RSSI="); Serial.println(rssi);
Serial.print("Test: FEI="); Serial.println(fei);
Serial.print("Test: AFC="); Serial.println(afc);
sonde.si()->rssi = rssi;
sonde.si()->afc = afc;
}
if(di>520) {
// TODO
Serial.println("TOO MUCH DATA");
break;
}
previous = millis(); // reset timeout after receiving data
#endif
}
value = sx1278.readRegister(REG_IRQ_FLAGS2);
}
Serial.printf("processed %d bytes before end/timeout\n", by);
#endif
/////
#if 0
int e = sx1278.receivePacketTimeout(1000, data+8);
if(e) { Serial.println("TIMEOUT"); return RX_TIMEOUT; } //if timeout... return 1
printRaw(data, M10MAXLEN);
//for(int i=0; i<M10MAXLEN; i++) { data[i] = reverse(data[i]); }
//printRaw(data, MAXLEN);
//for(int i=0; i<M10MAXLEN; i++) { data[i] = data[i] ^ scramble[i&0x3F]; }
//printRaw(data, MAXLEN);
//int res = decode41(data, M10MAXLEN);
#endif
int res=0;
return res==0 ? RX_OK : RX_ERROR;
}
#endif
M10 m10 = M10();
+96
View File
@@ -0,0 +1,96 @@
/*
* M10.h
* Functions for decoding Meteomodem M10 sondes with SX127x chips
* Copyright (C) 2019 Hansi Reiser, dl9rdz
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef M10_h
#define M10_h
#include <stdlib.h>
#include <stdint.h>
#include <Arduino.h>
#ifndef inttypes_h
#include <inttypes.h>
#endif
#if 0
struct CONTEXTR9 {
char calibdata[512];
uint32_t calibok;
char mesok;
char posok;
char framesent;
double lat;
double lon;
double heig;
double speed;
double dir;
double climb;
double lastlat;
double laslong;
double lastalt;
double lastspeed;
double lastdir;
double lastclb;
float hrmsc;
float vrmsc;
double hp;
double hyg;
double temp;
double ozontemp;
double ozon;
uint32_t goodsats;
uint32_t timems;
uint32_t framenum;
};
#endif
/* Main class */
class M10
{
private:
void printRaw(uint8_t *data, int len);
void processM10data(uint8_t data);
int decodeframeM10(uint8_t *data);
#if 0
void stobyte92(uint8_t byte);
void dogps(const uint8_t *sf, int sf_len,
struct CONTEXTR9 * cont, uint32_t * timems,
uint32_t * gpstime);
uint32_t bits2val(const uint8_t *bits, int len);
int bitsToBytes(uint8_t *bits, uint8_t *bytes, int len);
int decode92(byte *data, int maxlen);
uint8_t hamming_conf[ 7*8]; // 7*8=56
uint8_t hamming_dat1[13*8]; // 13*8=104
uint8_t hamming_dat2[13*8];
uint8_t block_conf[ 7*4]; // 7*4=28
uint8_t block_dat1[13*4]; // 13*4=52
uint8_t block_dat2[13*4];
uint8_t H[4][8] = // extended Hamming(8,4) particy check matrix
{{ 0, 1, 1, 1, 1, 0, 0, 0},
{ 1, 0, 1, 1, 0, 1, 0, 0},
{ 1, 1, 0, 1, 0, 0, 1, 0},
{ 1, 1, 1, 0, 0, 0, 0, 1}};
uint8_t He[8] = { 0x7, 0xB, 0xD, 0xE, 0x8, 0x4, 0x2, 0x1}; // Spalten von H:
// 1-bit-error-Syndrome
boolean initialized = false;
#endif
public:
M10();
int setup(float frequency);
int receive();
int waitRXcomplete();
//int use_ecc = 1;
};
extern M10 m10;
#endif
+556
View File
@@ -0,0 +1,556 @@
/* RS41 decoder functions */
#include "RS41.h"
#include "SX1278FSK.h"
#include "rsc.h"
#include "Sonde.h"
#define RS41_DEBUG 0
#if RS41_DEBUG
#define RS41_DBG(x) x
#else
#define RS41_DBG(x)
#endif
#define RS41MAXLEN (320)
static byte data[800];
static int dpos = 0;
static uint16_t CRCTAB[256];
#define X2C_DIVR(a, b) ((b) != 0.0f ? (a)/(b) : (a))
#define X2C_DIVL(a, b) ((a)/(b))
static uint32_t X2C_LSH(uint32_t a, int32_t length, int32_t n)
{
uint32_t m;
m = 0;
m = (length == 32) ? 0xFFFFFFFFl : (1 << length) - 1;
if (n > 0) {
if (n >= (int32_t)length)
return 0;
return (a << n) & m;
}
if (n <= (int32_t)-length)
return 0;
return (a >> -n) & m;
}
static double atang2(double x, double y)
{
double w;
if (fabs(x)>fabs(y)) {
w = (double)atan((float)(X2C_DIVL(y,x)));
if (x<0.0) {
if (y>0.0) w = 3.1415926535898+w;
else w = w-3.1415926535898;
}
}
else if (y!=0.0) {
w = (double)(1.5707963267949f-atan((float)(X2C_DIVL(x,
y))));
if (y<0.0) w = w-3.1415926535898;
}
else w = 0.0;
return w;
} /* end atang2() */
static void Gencrctab(void)
{
uint16_t j;
uint16_t i;
uint16_t crc;
for (i = 0U; i<=255U; i++) {
crc = (uint16_t)(i*256U);
for (j = 0U; j<=7U; j++) {
if ((0x8000U & crc)) crc = X2C_LSH(crc,16,1)^0x1021U;
else crc = X2C_LSH(crc,16,1);
} /* end for */
CRCTAB[i] = X2C_LSH(crc,16,-8)|X2C_LSH(crc,16,8);
} /* end for */
} /* end Gencrctab() */
int RS41::setup(float frequency)
{
#if RS41_DEBUG
Serial.println("Setup sx1278 for RS41 sonde");
#endif
if(!initialized) {
Gencrctab();
initrsc();
initialized = true;
}
if(sx1278.ON()!=0) {
RS41_DBG(Serial.println("Setting SX1278 power on FAILED"));
return 1;
}
if(sx1278.setFSK()!=0) {
RS41_DBG(Serial.println("Setting FSK mode FAILED"));
return 1;
}
if(sx1278.setBitrate(4800)!=0) {
RS41_DBG(Serial.println("Setting bitrate 4800bit/s FAILED"));
return 1;
}
#if RS41_DEBUG
float br = sx1278.getBitrate();
Serial.print("Exact bitrate is ");
Serial.println(br);
#endif
if(sx1278.setAFCBandwidth(sonde.config.rs41.agcbw)!=0) {
RS41_DBG(Serial.printf("Setting AFC bandwidth %d Hz FAILED", sonde.config.rs41.agcbw));
return 1;
}
if(sx1278.setRxBandwidth(sonde.config.rs41.rxbw)!=0) {
RS41_DBG(Serial.printf("Setting RX bandwidth to %d Hz FAILED", sonde.config.rs41.rxbw));
return 1;
}
// Enable auto-AFC, auto-AGC, RX Trigger by preamble
if(sx1278.setRxConf(0x1E)!=0) {
RS41_DBG(Serial.println("Setting RX Config FAILED"));
return 1;
}
// Set autostart_RX to 01, preamble 0, SYNC detect==on, syncsize=3 (==4 byte
//char header[] = "0110.0101 0110.0110 1010.0101 1010.1010";
//const char *SYNC="\x10\xB6\xCA\x11\x22\x96\x12\xF8";
const char *SYNC="\x08\x6D\x53\x88\x44\x69\x48\x1F";
if(sx1278.setSyncConf(0x57, 8, (const uint8_t *)SYNC)!=0) {
RS41_DBG(Serial.println("Setting SYNC Config FAILED"));
return 1;
}
if(sx1278.setPreambleDetect(0xA8)!=0) {
RS41_DBG(Serial.println("Setting PreambleDetect FAILED"));
return 1;
}
// Packet config 1: fixed len, no mancecer, no crc, no address filter
// Packet config 2: packet mode, no home ctrl, no beackn, msb(packetlen)=0)
if(sx1278.setPacketConfig(0x08, 0x40)!=0) {
RS41_DBG(Serial.println("Setting Packet config FAILED"));
return 1;
}
Serial.print("RS41: setting RX frequency to ");
Serial.println(frequency);
int retval = sx1278.setFrequency(frequency);
dpos = 0;
#if RS41_DEBUG
RS41_DBG(Serial.println("Setting SX1278 config for RS41 finished\n"); Serial.println());
#endif
sx1278.clearIRQFlags();
// the following is already done in receivePacketTimeout()
// sx1278.setPayloadLength(RS41MAXLEN-8); // Expect 320-8 bytes or 518-8 bytes (8 byte header)
// sx1278.writeRegister(REG_OP_MODE, FSK_RX_MODE);
return retval;
}
uint32_t RS41::bits2val(const uint8_t *bits, int len) {
uint32_t val = 0;
for (int j = 0; j < len; j++) {
val |= (bits[j] << (len-1-j));
}
return val;
}
RS41::RS41() {
}
/* RS41 reed solomon decoder, from dxlAPRS
*/
static int32_t reedsolomon41(byte buf[], uint32_t buf_len, uint32_t len2)
{
uint32_t i;
int32_t res1;
/*tb1, */
int32_t res;
char b1[256];
char b[256];
uint32_t eraspos[24];
uint32_t tmp;
for (i = 0UL; i<=255UL; i++) {
b[i] = 0;
b1[i] = 0;
} /* end for */
tmp = len2;
i = 0UL;
if (i<=tmp) for (;; i++) {
b[230UL-i] = buf[i*2UL+56UL];
b1[230UL-i] = buf[i*2UL+57UL];
if (i==tmp) break;
} /* end for */
for (i = 0UL; i<=23UL; i++) {
b[254UL-i] = buf[i+8UL];
b1[254UL-i] = buf[i+32UL];
} /* end for */
res = decodersc(b, eraspos, 0);
res1 = decodersc(b1, eraspos, 0);
if (res>0L && res<=12L) {
tmp = len2;
i = 0UL;
if (i<=tmp) for (;; i++) {
buf[i*2UL+56UL] = b[230UL-i];
if (i==tmp) break;
} /* end for */
for (i = 0UL; i<=23UL; i++) {
buf[i+8UL] = b[254UL-i];
} /* end for */
}
if (res1>0L && res1<=12L) {
tmp = len2;
i = 0UL;
if (i<=tmp) for (;; i++) {
buf[i*2UL+57UL] = b1[230UL-i];
if (i==tmp) break;
} /* end for */
for (i = 0UL; i<=23UL; i++) {
buf[i+32UL] = b1[254UL-i];
} /* end for */
}
if (res<0L || res1<0L) return -1L;
else return res+res1;
return 0;
} /* end reedsolomon41() */
static char crcrs(const byte frame[], uint32_t frame_len,
int32_t from, int32_t to)
{
uint16_t crc;
int32_t i;
int32_t tmp;
crc = 0xFFFFU;
tmp = to-3L;
i = from;
if (i<=tmp) for (;; i++) {
crc = X2C_LSH(crc,16,-8)^CRCTAB[(uint32_t)((crc^(uint16_t)(uint8_t)frame[i])&0xFFU)];
if (i==tmp) break;
} /* end for */
return frame[to-1L]==(char)crc && frame[to-2L]==(char)X2C_LSH(crc,
16,-8);
} /* end crcrs() */
static int32_t getint32(const byte frame[], uint32_t frame_len,
uint32_t p)
{
uint32_t n;
uint32_t i;
n = 0UL;
for (i = 3UL;; i--) {
n = n*256UL+(uint32_t)(uint8_t)frame[p+i];
if (i==0UL) break;
} /* end for */
return (int32_t)n;
} /* end getint32() */
static uint32_t getcard16(const byte frame[], uint32_t frame_len,
uint32_t p)
{
return (uint32_t)(uint8_t)frame[p]+256UL*(uint32_t)(uint8_t)
frame[p+1UL];
} /* end getcard16() */
static int32_t getint16(const byte frame[], uint32_t frame_len,
uint32_t p)
{
uint32_t n;
n = (uint32_t)(uint8_t)frame[p]+256UL*(uint32_t)(uint8_t)
frame[p+1UL];
if (n>=32768UL) return (int32_t)(n-65536UL);
return (int32_t)n;
} /* end getint16() */
static void wgs84r(double x, double y, double z,
double * lat, double * long0,
double * heig)
{
double sl;
double ct;
double st;
double t;
double rh;
double xh;
double h;
h = x*x+y*y;
if (h>0.0) {
rh = (double)sqrt((float)h);
xh = x+rh;
*long0 = atang2(xh, y)*2.0;
if (*long0>3.1415926535898) *long0 = *long0-6.2831853071796;
t = (double)atan((float)(X2C_DIVL(z*1.003364089821,
rh)));
st = (double)sin((float)t);
ct = (double)cos((float)t);
*lat = (double)atan((float)
(X2C_DIVL(z+4.2841311513312E+4*st*st*st,
rh-4.269767270718E+4*ct*ct*ct)));
sl = (double)sin((float)*lat);
*heig = X2C_DIVL(rh,(double)cos((float)*lat))-(double)(X2C_DIVR(6.378137E+6f,
sqrt((float)(1.0-6.6943799901413E-3*sl*sl))));
}
else {
*lat = 0.0;
*long0 = 0.0;
*heig = 0.0;
}
/* lat:=atan(z/(rh*(1.0 - E2))); */
/* heig:=sqrt(h + z*z) - EARTHA; */
} /* end wgs84r() */
// returns: 0=ok, -1=error
static void posrs41(const byte b[], uint32_t b_len, uint32_t p)
{
double dir;
double vu;
double ve;
double vn;
double vz;
double vy;
double vx;
double heig;
double long0;
double lat;
double z;
double y;
double x;
x = (double)getint32(b, b_len, p)*0.01;
y = (double)getint32(b, b_len, p+4UL)*0.01;
z = (double)getint32(b, b_len, p+8UL)*0.01;
wgs84r(x, y, z, &lat, &long0, &heig);
Serial.print(" ");
sonde.si()->lat = (float)(X2C_DIVL(lat,1.7453292519943E-2));
Serial.print(sonde.si()->lat);
Serial.print(" ");
sonde.si()->lon = (float)(X2C_DIVL(long0,1.7453292519943E-2));
Serial.print(sonde.si()->lon);
if (heig<1.E+5 && heig>(-1.E+5)) {
Serial.print(" ");
Serial.print((uint32_t)heig);
Serial.print("m");
}
/*speed */
vx = (double)getint16(b, b_len, p+12UL)*0.01;
vy = (double)getint16(b, b_len, p+14UL)*0.01;
vz = (double)getint16(b, b_len, p+16UL)*0.01;
vn = (-(vx*(double)sin((float)lat)*(double)
cos((float)long0))-vy*(double)
sin((float)lat)*(double)sin((float)
long0))+vz*(double)cos((float)lat);
ve = -(vx*(double)sin((float)long0))+vy*(double)
cos((float)long0);
vu = vx*(double)cos((float)lat)*(double)
cos((float)long0)+vy*(double)
cos((float)lat)*(double)sin((float)
long0)+vz*(double)sin((float)lat);
dir = X2C_DIVL(atang2(vn, ve),1.7453292519943E-2);
if (dir<0.0) dir = 360.0+dir;
sonde.si()->dir = dir;
Serial.print(" ");
sonde.si()->hs = sqrt((float)(vn*vn+ve*ve))*3.6f;
Serial.print(sonde.si()->hs);
Serial.print("km/h ");
Serial.print(dir);
Serial.print("deg ");
Serial.print((float)vu);
sonde.si()->vs = vu;
Serial.print("m/s ");
uint8_t sats = getcard16(b, b_len, p+18UL)&255UL;
Serial.print(sats);
Serial.print("Sats");
sonde.si()->sats = sats;
sonde.si()->alt = heig;
if( 0==(int)(lat*10000) && 0==(int)(long0*10000) ) {
if(sonde.si()->validPos) {
// we have an old position, so keep previous position and mark it as old
sonde.si()->validPos |= 0x80;
}
}
else
sonde.si()->validPos = 0x7f;
} /* end posrs41() */
// returns: 0: ok, -1: rs or crc error
int RS41::decode41(byte *data, int maxlen)
{
char buf[128];
int crcok = 0;
int32_t corr = reedsolomon41(data, 560, 131); // try short frame first
if(corr<0) {
corr = reedsolomon41(data, 560, 230); // try long frame
}
#if 0
Serial.print("RS result:");
Serial.print(corr);
Serial.println();
#endif
int p = 57; // 8 byte header, 48 byte RS
while(p<maxlen) { /* why 555? */
uint8_t typ = data[p++];
uint32_t len = data[p++]+2UL;
if(p+len>maxlen) break;
#if 0
// DEBUG OUTPUT
Serial.print("@");
Serial.print(p-2);
Serial.print(": ID:");
Serial.print(typ, HEX);
Serial.print(", len=");
Serial.print(len);
Serial.print(": ");
for(int i=0; i<len-1; i++) {
char buf[3];
snprintf(buf, 4, "%02X|", data[p+i]);
Serial.print(buf);
}
#endif
// check CRC
if(!crcrs(data, 560, p, p+len)) {
Serial.println("###CRC ERROR###");
} else {
crcok = 1;
switch(typ) {
case 'y': // name
{
Serial.print("#");
uint16_t fnr = data[p]+(data[p+1]<<8);
Serial.print(fnr);
sonde.si()->frame = fnr;
Serial.print("; RS41 ID ");
snprintf(buf, 10, "%.8s ", data+p+2);
Serial.print(buf);
sonde.si()->type=STYPE_RS41;
strncpy(sonde.si()->id, (const char *)(data+p+2), 8);
sonde.si()->id[8]=0;
strncpy(sonde.si()->ser, (const char *)(data+p+2), 8);
sonde.si()->ser[8]=0;
sonde.si()->validID=true;
int calnr = data[p+23];
// not sure about this
if(calnr==0x31) {
uint16_t bt = data[p+30] + 256*data[p+31];
sonde.si()->burstKT = bt;
}
// this should be right...
if(calnr==0x02) {
uint16_t kt = data[p+31] + 256*data[p+32];
sonde.si()->launchKT = kt;
}
// and this seems fine as well...
if(calnr==0x32) {
uint16_t cntdown = data[p+24] + (data[p+25]<<8);
uint16_t min = cntdown - (cntdown/3600)*3600;
Serial.printf("Countdown value: %d\n [%2d:%02d:%02d]", cntdown, cntdown/3600, min/60, min-(min/60)*60);
sonde.si()->countKT = cntdown;
sonde.si()->crefKT = fnr;
}
}
// TODO: some more data
break;
case '|': // date
{
uint32_t gpstime = getint32(data, 560, p+2);
uint16_t gpsweek = getint16(data, 560, p);
// UTC is GPSTIME - 18s (24*60*60-18 = 86382)
// one week = 7*24*60*60 = 604800 seconds
// unix epoch starts jan 1st 1970 0:00
// gps time starts jan 6, 1980 0:00. thats 315964800 epoch seconds.
// subtracting 86400 yields 315878400UL
sonde.si()->time = (gpstime/1000) + 86382 + gpsweek*604800 + 315878400UL;
sonde.si()->validTime = true;
}
break;
case '{': // pos
posrs41(data+p, len, 0);
break;
default:
break;
}}
p += len;
Serial.println();
}
return crcok ? 0 : -1;
}
void RS41::printRaw(uint8_t *data, int len)
{
char buf[3];
int i;
for(i=0; i<len; i++) {
snprintf(buf, 3, "%02X", data[i]);
Serial.print(buf);
}
Serial.println();
}
void RS41::bitsToBytes(uint8_t *bits, uint8_t *bytes, int len)
{
int i;
for(i=0; i<len*4; i++) {
bytes[i/8] = (bytes[i/8]<<1) | (bits[i]?1:0);
}
bytes[(i-1)/8] &= 0x0F;
}
static unsigned char lookup[16] = {
0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe,
0x1, 0x9, 0x5, 0xd, 0x3, 0xb, 0x7, 0xf, };
static uint8_t reverse(uint8_t n) {
return (lookup[n&0x0f] << 4) | lookup[n>>4];
}
static uint8_t scramble[64] = {150U,131U,62U,81U,177U,73U,8U,152U,50U,5U,89U,
14U,249U,68U,198U,38U,33U,96U,194U,234U,121U,93U,109U,161U,
84U,105U,71U,12U,220U,232U,92U,241U,247U,118U,130U,127U,7U,
153U,162U,44U,147U,124U,48U,99U,245U,16U,46U,97U,208U,188U,
180U,182U,6U,170U,244U,35U,120U,110U,59U,174U,191U,123U,76U,
193U};
int RS41::receive() {
sx1278.setPayloadLength(RS41MAXLEN-8);
int e = sx1278.receivePacketTimeout(1000, data+8);
if(e) { Serial.println("TIMEOUT"); return RX_TIMEOUT; }
for(int i=0; i<RS41MAXLEN; i++) { data[i] = reverse(data[i]); }
for(int i=0; i<RS41MAXLEN; i++) { data[i] = data[i] ^ scramble[i&0x3F]; }
return decode41(data, RS41MAXLEN);
}
int RS41::waitRXcomplete() {
// Currently not used. can be used for additinoal post-processing
// (required for RS92 to avoid FIFO overrun in rx task)
#if 0
int res;
uint32_t t0 = millis();
while(rxtask.receiveResult<0 && millis()-t0 < 3000) { delay(50); }
if(rxtask.receiveResult<0 || rxtask.receiveResult==RX_TIMEOUT) {
res = RX_TIMEOUT;
} else if (rxtask.receiveResult==0) {
res = RX_OK;
} else {
res = RX_ERROR;
}
rxtask.receiveResult = -1;
Serial.printf("waitRXcomplete returning %d\n", res);
return res;
#endif
return 0;
}
RS41 rs41 = RS41();
+67
View File
@@ -0,0 +1,67 @@
/*
* RS41.h
* Functions for decoding RS41 sondes with SX127x chips
* Copyright (C) 2019 Hansi Reiser, dl9rdz
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef RS41_h
#define RS41_h
#include <stdlib.h>
#include <stdint.h>
#include <Arduino.h>
#ifndef inttypes_h
#include <inttypes.h>
#endif
/* Main class */
class RS41
{
private:
uint32_t bits2val(const uint8_t *bits, int len);
void printRaw(uint8_t *data, int len);
void bitsToBytes(uint8_t *bits, uint8_t *bytes, int len);
int decode41(byte *data, int maxlen);
#define B 8
#define S 4
uint8_t hamming_conf[ 7*B]; // 7*8=56
uint8_t hamming_dat1[13*B]; // 13*8=104
uint8_t hamming_dat2[13*B];
uint8_t block_conf[ 7*S]; // 7*4=28
uint8_t block_dat1[13*S]; // 13*4=52
uint8_t block_dat2[13*S];
uint8_t H[4][8] = // extended Hamming(8,4) particy check matrix
{{ 0, 1, 1, 1, 1, 0, 0, 0},
{ 1, 0, 1, 1, 0, 1, 0, 0},
{ 1, 1, 0, 1, 0, 0, 1, 0},
{ 1, 1, 1, 0, 0, 0, 0, 1}};
uint8_t He[8] = { 0x7, 0xB, 0xD, 0xE, 0x8, 0x4, 0x2, 0x1}; // Spalten von H:
// 1-bit-error-Syndrome
boolean initialized = false;
public:
RS41();
// New interface:
// setup() is called when channel is activated (sets mode and frequency and activates receiver)
int setup(float frequency);
// processRXbyte is called by background task for each received byte
// should be fast enough to not cause sx127x fifo buffer overflow
// void processRXbyte(uint8_t data);
// is called approx. 1x per second, may do some post-processing of received data
// and update information in sonde data structure
// returns infomration about sucess/error (for timers and for quality bar in display)
int receive();
int waitRXcomplete();
//int receiveFrame();
int use_ecc = 1;
};
extern RS41 rs41;
#endif
+727
View File
@@ -0,0 +1,727 @@
/* RS92 decoder functions */
#include "RS92.h"
#include "SX1278FSK.h"
#include "rsc.h"
#include "Sonde.h"
#include <SPIFFS.h>
// well...
#include "rs92gps.h"
#define RS92_DEBUG 1
#if RS92_DEBUG
#define RS92_DBG(x) x
#else
#define RS92_DBG(x)
#endif
//static uint16_t CRCTAB[256];
uint16_t *CRCTAB = NULL;
#define X2C_DIVR(a, b) ((b) != 0.0f ? (a)/(b) : (a))
#define X2C_DIVL(a, b) ((a)/(b))
static uint32_t X2C_LSH(uint32_t a, int32_t length, int32_t n)
{
uint32_t m;
m = 0;
m = (length == 32) ? 0xFFFFFFFFl : (1 << length) - 1;
if (n > 0) {
if (n >= (int32_t)length)
return 0;
return (a << n) & m;
}
if (n <= (int32_t)-length)
return 0;
return (a >> -n) & m;
}
#if 0
static double atang2(double x, double y)
{
double w;
if (fabs(x)>fabs(y)) {
w = (double)atan((float)(X2C_DIVL(y,x)));
if (x<0.0) {
if (y>0.0) w = 3.1415926535898+w;
else w = w-3.1415926535898;
}
}
else if (y!=0.0) {
w = (double)(1.5707963267949f-atan((float)(X2C_DIVL(x,
y))));
if (y<0.0) w = w-3.1415926535898;
}
else w = 0.0;
return w;
} /* end atang2() */
#endif
static void Gencrctab(void)
{
uint16_t j;
uint16_t i;
uint16_t crc;
if(!CRCTAB) { CRCTAB=(uint16_t *)malloc(256*sizeof(uint16_t)); }
for (i = 0U; i<=255U; i++) {
crc = (uint16_t)(i*256U);
for (j = 0U; j<=7U; j++) {
if ((0x8000U & crc)) crc = X2C_LSH(crc,16,1)^0x1021U;
else crc = X2C_LSH(crc,16,1);
} /* end for */
CRCTAB[i] = X2C_LSH(crc,16,-8)|X2C_LSH(crc,16,8);
} /* end for */
} /* end Gencrctab() */
static byte data1[512]={0x2A, 0x2A, 0x2A, 0x2A, 0x2A, 0x10};
static byte data2[512]={0x2A, 0x2A, 0x2A, 0x2A, 0x2A, 0x10};
static byte *dataptr=data1;
static uint8_t rxbitc;
static int32_t asynst[10]={0};
static uint16_t rxbyte;
int rxp=0;
static int haveNewFrame = 0;
static int lastFrame = 0;
static int headerDetected = 0;
int RS92::setup(float frequency)
{
#if RS92_DEBUG
Serial.println("Setup sx1278 for RS92 sonde");
#endif
if(!initialized) {
Gencrctab();
initrsc();
// not here for now.... get_eph("/brdc.19n");
initialized = true;
}
if(sx1278.ON()!=0) {
RS92_DBG(Serial.println("Setting SX1278 power on FAILED"));
return 1;
}
if(sx1278.setFSK()!=0) {
RS92_DBG(Serial.println("Setting FSJ mode FAILED"));
return 1;
}
if(sx1278.setBitrate(4800)!=0) {
RS92_DBG(Serial.println("Setting bitrate 4800bit/s FAILED"));
return 1;
}
#if RS92_DEBUG
float br = sx1278.getBitrate();
Serial.print("Exact bitrate is ");
Serial.println(br);
#endif
if(sx1278.setAFCBandwidth(sonde.config.rs92.rxbw)!=0) {
RS92_DBG(Serial.printf("Setting AFC bandwidth %d Hz FAILED", sonde.config.rs92.rxbw));
return 1;
}
if(sx1278.setRxBandwidth(sonde.config.rs92.rxbw)!=0) {
RS92_DBG(Serial.printf("Setting RX bandwidth to %d Hz FAILED", sonde.config.rs92.rxbw));
return 1;
}
// Enable auto-AFC, auto-AGC, RX Trigger by preamble
if(sx1278.setRxConf(0x1E)!=0) {
RS92_DBG(Serial.println("Setting RX Config FAILED"));
return 1;
}
// Set autostart_RX to 01, preamble 0, SYNC detect==on, syncsize=3 (==4 byte
//char header[] = "0110.0101 0110.0110 1010.0101 1010.1010";
//const char *SYNC="\x10\xB6\xCA\x11\x22\x96\x12\xF8";
//const char *SYNC="\x08\x6D\x53\x88\x44\x69\x48\x1F";
// was 0x57
//const char *SYNC="\x99\x9A";
#if 1
// version 1, working with continuous RX
const char *SYNC="\x66\x65";
if(sx1278.setSyncConf(0x70, 2, (const uint8_t *)SYNC)!=0) {
RS92_DBG(Serial.println("Setting SYNC Config FAILED"));
return 1;
}
if(sx1278.setPreambleDetect(0xA8)!=0) {
RS92_DBG(Serial.println("Setting PreambleDetect FAILED"));
return 1;
}
#endif
#if 0
// version 2, with per-packet rx start, untested
// header is 2a 10 65, i.e. with lsb first
// 0 0101 0100 1 0 0000 1000 1 0 1010 0110 1
// 10 10011001 10011010 01 10 10101010 01101010 01 10 01100110 10010110 01
// preamble 0x6A 0x66 0x6A
// i.e. preamble detector on (0x80), preamble detector size 1 (0x00), preample chip errors??? (0x0A)
// after 2a2a2a2a2a1065
if(sx1278.setPreambleDetect(0xA8)!=0) {
RS92_DBG(Serial.println("Setting PreambleDetect FAILED"));
return 1;
}
// sync config: ato restart (01), preamble polarity AA (0), sync on (1), resevered (0), syncsize 2+1 (010) => 0x52
const char *SYNC="\x6A\x66\x69";
if(sx1278.setSyncConf(0x52, 3, (const uint8_t *)SYNC)!=0) {
RS92_DBG(Serial.println("Setting SYNC Config FAILED"));
return 1;
}
// payload length is ((240 - 7)*10 +6)/8 = 292
#endif
// Packet config 1: fixed len, no mancecer, no crc, no address filter
// Packet config 2: packet mode, no home ctrl, no beackn, msb(packetlen)=0)
if(sx1278.setPacketConfig(0x08, 0x40)!=0) {
RS92_DBG(Serial.println("Setting Packet config FAILED"));
return 1;
}
Serial.print("RS92: setting RX frequency to ");
Serial.println(frequency);
int res = sx1278.setFrequency(frequency);
sx1278.clearIRQFlags();
// enable RX
sx1278.setPayloadLength(0); // infinite for now...
//sx1278.setPayloadLength(292);
sx1278.writeRegister(REG_OP_MODE, FSK_RX_MODE);
#if RS92_DEBUG
RS92_DBG(Serial.println("Setting SX1278 config for RS92 finished\n"); Serial.println());
#endif
return res;
}
#if 0
int RS92::setFrequency(float frequency) {
Serial.print("RS92: setting RX frequency to ");
Serial.println(frequency);
int res = sx1278.setFrequency(frequency);
// enable RX
sx1278.setPayloadLength(0); // infinite for now...
sx1278.writeRegister(REG_OP_MODE, FSK_RX_MODE);
return res;
}
#endif
uint32_t RS92::bits2val(const uint8_t *bits, int len) {
uint32_t val = 0;
for (int j = 0; j < len; j++) {
val |= (bits[j] << (len-1-j));
}
return val;
}
RS92::RS92() {
}
/* RS92 reed solomon decoder, from dxlAPRS
*/
#if 0
static char crcrs(const byte frame[], uint32_t frame_len,
int32_t from, int32_t to)
{
uint16_t crc;
int32_t i;
int32_t tmp;
crc = 0xFFFFU;
tmp = to-3L;
i = from;
if (i<=tmp) for (;; i++) {
crc = X2C_LSH(crc,16,-8)^CRCTAB[(uint32_t)((crc^(uint16_t)(uint8_t)frame[i])&0xFFU)];
if (i==tmp) break;
} /* end for */
return frame[to-1L]==(char)crc && frame[to-2L]==(char)X2C_LSH(crc,
16,-8);
} /* end crcrs() */
static int32_t getint32(const byte frame[], uint32_t frame_len,
uint32_t p)
{
uint32_t n;
uint32_t i;
n = 0UL;
for (i = 3UL;; i--) {
n = n*256UL+(uint32_t)(uint8_t)frame[p+i];
if (i==0UL) break;
} /* end for */
return (int32_t)n;
} /* end getint32() */
static uint32_t getcard16(const byte frame[], uint32_t frame_len,
uint32_t p)
{
return (uint32_t)(uint8_t)frame[p]+256UL*(uint32_t)(uint8_t)
frame[p+1UL];
} /* end getcard16() */
static int32_t getint16(const byte frame[], uint32_t frame_len,
uint32_t p)
{
uint32_t n;
n = (uint32_t)(uint8_t)frame[p]+256UL*(uint32_t)(uint8_t)
frame[p+1UL];
if (n>=32768UL) return (int32_t)(n-65536UL);
return (int32_t)n;
} /* end getint16() */
static void wgs84r(double x, double y, double z,
double * lat, double * long0,
double * heig)
{
double sl;
double ct;
double st;
double t;
double rh;
double xh;
double h;
h = x*x+y*y;
if (h>0.0) {
rh = (double)sqrt((float)h);
xh = x+rh;
*long0 = atang2(xh, y)*2.0;
if (*long0>3.1415926535898) *long0 = *long0-6.2831853071796;
t = (double)atan((float)(X2C_DIVL(z*1.003364089821,
rh)));
st = (double)sin((float)t);
ct = (double)cos((float)t);
*lat = (double)atan((float)
(X2C_DIVL(z+4.2841311513312E+4*st*st*st,
rh-4.269767270718E+4*ct*ct*ct)));
sl = (double)sin((float)*lat);
*heig = X2C_DIVL(rh,(double)cos((float)*lat))-(double)(X2C_DIVR(6.378137E+6f,
sqrt((float)(1.0-6.6943799901413E-3*sl*sl))));
}
else {
*lat = 0.0;
*long0 = 0.0;
*heig = 0.0;
}
/* lat:=atan(z/(rh*(1.0 - E2))); */
/* heig:=sqrt(h + z*z) - EARTHA; */
} /* end wgs84r() */
#endif
static int32_t reedsolomon92(uint8_t *buf, uint32_t buf_len)
{
uint32_t i;
int32_t res;
uint8_t b[256];
uint32_t eraspos[24];
for (i = 0UL; i<=255UL; i++) {
b[i] = 0;
} /* end for */
for (i = 0UL; i<=209UL; i++) {
b[230UL-i] = buf[i+6UL];
} /* end for */
for (i = 0UL; i<=23UL; i++) {
b[254UL-i] = buf[i+216UL];
} /* end for */
res = decodersc((char *)b, eraspos, 0L);
if (res>0L && res<=12L) {
for (i = 0UL; i<=209UL; i++) {
buf[i+6UL] = b[230UL-i];
} /* end for */
for (i = 0UL; i<=23UL; i++) {
buf[i+216UL] = b[254UL-i];
} /* end for */
}
return res;
} /* end reedsolomon92() */
void printRaw(uint8_t *data, int len)
{
char buf[3];
int i;
for(i=0; i<len; i++) {
snprintf(buf, 3, "%02X", data[i]);
Serial.print(buf);
}
Serial.println();
}
void RS92::decodeframe92(uint8_t *data)
{
//uint32_t gpstime;
//uint32_t flen;
//uint32_t j;
int32_t corr;
corr = reedsolomon92(data, 301ul);
//int calok;
//int mesok;
//uint32_t calibok;
lastFrame = (dataptr==data1)?1:2;
Serial.printf("rs corr is %d --- data:%p data1:%p data2:%p lastframe=%d\n", corr, data, data1, data2, lastFrame);
dataptr = (dataptr==data1)?data2:data1;
//print_frame(data, 240);
#if 0
/* from sondemod*/
int p=6;
while(1) {
uint8_t typ = data[p];
if(typ==0xff) break;
++p;
int len = ((uint32_t)data[p])*2 + 2;
Serial.printf("type %c: len=%d\n", typ, len);
//printRaw(data+p, len+2);
if(len>240) {
Serial.print("RS92 frame too long: ");
Serial.println(len);
break;
}
++p;
j=0;
uint16_t crc = 0xFFFF;
while(j<len) {
if(j < len-2) {
for(int ic = 0; ic<=7; ic++) {
if (((0x8000&crc)!=0) != ( ((1<<(7-ic))&data[p])!=0 )) {
crc <<= 1;
crc ^= 0x1021;
} else {
crc <<= 1;
}
}
}
++p;
++j;
if(p>240) {
Serial.println("eof");
return;
}
}
if ( (((uint8_t)(crc&0xff)) != data[p-2]) || (((uint8_t)(crc>>8)) != data[p-1])) {
Serial.printf("************ crc error: expected %04x\n",crc);
continue;
}
switch(typ) {
case 'e':
Serial.println("cal ");
//docalib(sf, 256, objname, 9, &contextr9, &mhz, &frameno);
// ...
break;
case 'i':
if(calok && calibok==0xffffffff) {
//domes(sf, 256, &hp, &hyg, &temp)
mesok = 1;
}
break;
case 'g':
Serial.println("gps ");
if(1||calok) {
//dogps(data+p-len, 256, &contextr9, &contextr9.timems, &gpstime);
}
break;
case 'h':
Serial.println("data "); break;
if(data[p+2]!=3) Serial.println("aux ");
// ..
break;
}
}
#endif
} /* end decodeframe92() */
void RS92::printRaw(uint8_t *data, int len)
{
char buf[3];
int i;
for(i=0; i<len; i++) {
snprintf(buf, 3, "%02X", data[i]);
Serial.print(buf);
}
Serial.println();
}
#if 0
// I guess this is old copy&paste stuff from RS41??
int RS92::bitsToBytes(uint8_t *bits, uint8_t *bytes, int len)
{
int i;
for(i=0; i<len*4; i++) {
bytes[i/8] = (bytes[i/8]<<1) | (bits[i]?1:0);
}
bytes[(i-1)/8] &= 0x0F;
}
static unsigned char lookup[16] = {
0x0, 0x8, 0x4, 0xc, 0x2, 0xa, 0x6, 0xe,
0x1, 0x9, 0x5, 0xd, 0x3, 0xb, 0x7, 0xf, };
static uint8_t reverse(uint8_t n) {
return (lookup[n&0x0f] << 4) | lookup[n>>4];
}
static uint8_t scramble[64] = {150U,131U,62U,81U,177U,73U,8U,152U,50U,5U,89U,
14U,249U,68U,198U,38U,33U,96U,194U,234U,121U,93U,109U,161U,
84U,105U,71U,12U,220U,232U,92U,241U,247U,118U,130U,127U,7U,
153U,162U,44U,147U,124U,48U,99U,245U,16U,46U,97U,208U,188U,
180U,182U,6U,170U,244U,35U,120U,110U,59U,174U,191U,123U,76U,
193U};
#endif
void RS92::stobyte92(uint8_t b)
{
dataptr[rxp] = b;
if(rxp>=5 || b=='*') rxp++; else rxp=0;
if(rxp==6) { // header detected
headerDetected = 1;
}
if(rxp>=240) { // frame complete... (240 byte)
rxp=0;
//printRaw(data, 240);
decodeframe92(dataptr);
haveNewFrame = 1;
}
} /* end stobyte92() */
uint32_t rxdata;
bool rxsearching=true;
// search for
// 101001100110011010011010011001100110100110101010100110101001
// 1010011001100110100110100110 0110.0110 1001.1010 1010.1001 1010.1001 => 0x669AA9A9
void RS92::process8N1data(uint8_t dt)
{
for(int i=0; i<8; i++) {
uint8_t d = (dt&0x80)?1:0;
rxdata = (rxdata<<1) | d;
if((rxbitc&1)==1) { rxbyte = (rxbyte>>1) + (d<<9); } // mancester decoded data
dt <<= 1;
//
if(rxsearching) {
if(rxdata == 0x669AA9A9) {
rxsearching = false;
rxbitc = 0;
rxp = 6;
int rssi=sx1278.getRSSI();
int fei=sx1278.getFEI();
int afc=sx1278.getAFC();
Serial.print("Test: RSSI="); Serial.print(rssi);
Serial.print(" FEI="); Serial.print(fei);
Serial.print(" AFC="); Serial.println(afc);
sonde.si()->rssi = rssi;
sonde.si()->afc = afc;
}
} else {
rxbitc = (rxbitc+1)%20;
if(rxbitc == 0) { // got startbit, 8 data bit, stop bit
//Serial.printf("%03x ",rxbyte);
dataptr[rxp++] = (rxbyte>>1)&0xff;
if(rxp==7 && dataptr[6] != 0x65) {
Serial.printf("wrong start: %02x\n",dataptr[6]);
rxsearching = true;
}
if(rxp>=240) {
rxsearching = true;
decodeframe92(dataptr);
haveNewFrame = 1;
}
}
}
}
}
void process8N1dataOrig(uint8_t data)
{
// data contains 8 bits (after mancester encoding; 4 real bit), big endian
for(int i=0; i<4; i++) {
uint8_t d = (data&0x80)?1:0;
data = data << 2;
rxbyte = (rxbyte>>1) + (d<<8);
int maxk = 0;
int max0 = 0;
for(int k = 0; k< 10; k++) {
int n = asynst[k] - asynst[(k+1)%10];
if(abs(n)>abs(max0)) {
max0 = n;
maxk = k;
}
}
//Serial.printf("<%d,%d,%d>",max0,maxk,rxbitc);
if(rxbitc == maxk) {
if(max0<0) { rxbyte = rxbyte ^ 0xFF; }
/////TODO stobyte92( rxbyte&0xff );
}
//Serial.printf("%d:",asynst[rxbitc]);
if(d) {
asynst[rxbitc] += (32767-asynst[rxbitc])/16;
} else {
asynst[rxbitc] -= (32767+asynst[rxbitc])/16;
}
//Serial.printf("%d ",asynst[rxbitc]);
rxbitc = (rxbitc+1) % 10;
}
}
int RS92::receive() {
unsigned long t0 = millis();
Serial.printf("RS92::receive() start at %ld\n",t0);
while( millis() - t0 < 1000 ) {
uint8_t value = sx1278.readRegister(REG_IRQ_FLAGS2);
if ( bitRead(value, 7) ) {
Serial.println("FIFO full");
}
if ( bitRead(value, 4) ) {
Serial.println("FIFO overflow");
}
if ( bitRead(value, 2) == 1 ) {
Serial.println("FIFO: ready()");
sx1278.clearIRQFlags();
}
if(bitRead(value, 6) == 0) { // while FIFO not empty
byte data = sx1278.readRegister(REG_FIFO);
//Serial.printf("%02x",data);
process8N1data(data);
value = sx1278.readRegister(REG_IRQ_FLAGS2);
} else {
if(headerDetected) {
t0 = millis(); // restart timer... don't time out if header detected...
headerDetected = 0;
}
if(haveNewFrame) {
Serial.printf("RS92::receive(): new frame complete after %ldms\n", millis()-t0);
haveNewFrame = 0;
return RX_OK;
}
delay(2);
}
}
Serial.printf("RS92::receive() timed out\n");
return RX_TIMEOUT; // TODO RX_OK;
}
#define RS92MAXLEN (240)
int RS92::waitRXcomplete() {
// called after complete...
Serial.printf("decoding frame %d\n", lastFrame);
print_frame(lastFrame==1?data1:data2, 240);
SondeInfo *si = sonde.sondeList+rxtask.receiveSonde;
si->lat = gpx.lat;
si->lon = gpx.lon;
si->alt = gpx.alt;
si->vs = gpx.vU;
si->hs = gpx.vH;
si->dir = gpx.vD;
si->validPos = 0x3f;
memcpy(si->id, gpx.id, 9);
memcpy(si->ser, gpx.id, 9);
si->validID = true;
si->frame = gpx.frnr;
si->sats = gpx.k;
si->time = (gpx.gpssec/1000) + 86382 + gpx.week*604800 + 315878400UL;
si->validTime = true;
#if 0
int res=0;
uint32_t t0 = millis();
while( rxtask.receiveResult == 0xFFFF && millis()-t0 < 2000) { delay(20); }
if( rxtask.receiveResult<0 || rxtask.receiveResult==RX_TIMEOUT) {
res = RX_TIMEOUT;
} else if ( rxtask.receiveResult==0) {
res = RX_OK;
} else {
res = RX_ERROR;
}
rxtask.receiveResult = 0xFFFF;
Serial.printf("RS92::waitRXcomplete returning %d (%s)\n", res, RXstr[res]);
return res;
#endif
return 0;
}
#if 0
int oldwaitRXcomplete() {
Serial.println("RS92: receive frame...\n");
sx1278receiveData = true;
delay(6000); // done in other task....
//sx1278receiveData = false;
#if 0
//sx1278.setPayloadLength(518-8); // Expect 320-8 bytes or 518-8 bytes (8 byte header)
//sx1278.setPayloadLength(0); // infinite for now...
////// test code for continuous reception
// sx1278.receive(); /// active FSK RX mode -- already done above...
uint8_t value = sx1278.readRegister(REG_IRQ_FLAGS2);
unsigned long previous = millis();
byte ready=0;
uint32_t wait = 8000;
// while not yet done or FIFO not yet empty
// bit 6: FIFO Empty
// bit 2 payload ready
int by=0;
while( (!ready || bitRead(value,6)==0) && (millis() - previous < wait) )
{
if( bitRead(value, 7) ) { Serial.println("FIFO full"); }
if( bitRead(value, 4) ) { Serial.println("FIFO overflow"); }
if( bitRead(value,2)==1 ) ready=1;
if( bitRead(value, 6) == 0 ) { // FIFO not empty
byte data = sx1278.readRegister(REG_FIFO);
process8N1data(data);
by++;
#if 0
if(di==1) {
int rssi=getRSSI();
int fei=getFEI();
int afc=getAFC();
Serial.print("Test: RSSI="); Serial.println(rssi);
Serial.print("Test: FEI="); Serial.println(fei);
Serial.print("Test: AFC="); Serial.println(afc);
sonde.si()->rssi = rssi;
sonde.si()->afc = afc;
}
if(di>520) {
// TODO
Serial.println("TOO MUCH DATA");
break;
}
previous = millis(); // reset timeout after receiving data
#endif
}
value = sx1278.readRegister(REG_IRQ_FLAGS2);
}
Serial.printf("processed %d bytes before end/timeout\n", by);
#endif
/////
#if 0
int e = sx1278.receivePacketTimeout(1000, data+8);
if(e) { Serial.println("TIMEOUT"); return RX_TIMEOUT; } //if timeout... return 1
printRaw(data, RS92MAXLEN);
//for(int i=0; i<RS92MAXLEN; i++) { data[i] = reverse(data[i]); }
//printRaw(data, MAXLEN);
//for(int i=0; i<RS92MAXLEN; i++) { data[i] = data[i] ^ scramble[i&0x3F]; }
//printRaw(data, MAXLEN);
//int res = decode41(data, RS92MAXLEN);
#endif
int res=0;
return res==0 ? RX_OK : RX_ERROR;
}
#endif
RS92 rs92 = RS92();
+96
View File
@@ -0,0 +1,96 @@
/*
* RS92.h
* Functions for decoding RS92 sondes with SX127x chips
* Copyright (C) 2019 Hansi Reiser, dl9rdz
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef RS92_h
#define RS92_h
#include <stdlib.h>
#include <stdint.h>
#include <Arduino.h>
#ifndef inttypes_h
#include <inttypes.h>
#endif
struct CONTEXTR9 {
char calibdata[512];
uint32_t calibok;
char mesok;
char posok;
char framesent;
double lat;
double lon;
double heig;
double speed;
double dir;
double climb;
double lastlat;
double laslong;
double lastalt;
double lastspeed;
double lastdir;
double lastclb;
float hrmsc;
float vrmsc;
double hp;
double hyg;
double temp;
double ozontemp;
double ozon;
uint32_t goodsats;
uint32_t timems;
uint32_t framenum;
};
/* Main class */
class RS92
{
private:
void process8N1data(uint8_t data);
void stobyte92(uint8_t byte);
void decodeframe92(uint8_t *data);
#if 0
void dogps(const uint8_t *sf, int sf_len,
struct CONTEXTR9 * cont, uint32_t * timems,
uint32_t * gpstime);
#endif
uint32_t bits2val(const uint8_t *bits, int len);
void printRaw(uint8_t *data, int len);
int bitsToBytes(uint8_t *bits, uint8_t *bytes, int len);
int decode92(byte *data, int maxlen);
uint8_t hamming_conf[ 7*8]; // 7*8=56
uint8_t hamming_dat1[13*8]; // 13*8=104
uint8_t hamming_dat2[13*8];
uint8_t block_conf[ 7*4]; // 7*4=28
uint8_t block_dat1[13*4]; // 13*4=52
uint8_t block_dat2[13*4];
uint8_t H[4][8] = // extended Hamming(8,4) particy check matrix
{{ 0, 1, 1, 1, 1, 0, 0, 0},
{ 1, 0, 1, 1, 0, 1, 0, 0},
{ 1, 1, 0, 1, 0, 0, 1, 0},
{ 1, 1, 1, 0, 0, 0, 0, 1}};
uint8_t He[8] = { 0x7, 0xB, 0xD, 0xE, 0x8, 0x4, 0x2, 0x1}; // Spalten von H:
// 1-bit-error-Syndrome
boolean initialized = false;
public:
RS92();
int setup(float frequency);
int receive();
int waitRXcomplete();
int use_ecc = 1;
};
extern RS92 rs92;
#endif
+113
View File
@@ -0,0 +1,113 @@
#include "Scanner.h"
#include <SX1278FSK.h>
#include <U8x8lib.h>
#include "Sonde.h"
#include "Display.h"
#define CHANBW 10
#define PIXSAMPL (50/CHANBW)
#define SMOOTH 3
//#define STARTF 401000000
#define NCHAN ((int)(6000/CHANBW))
double STARTF = (sonde.config.startfreq * 1000000);
//int CHANBW = (sonde.config.channelbw);
//int NCHAN = ((int)(6000/CHANBW));
//int PIXSAMPL = (50/CHANBW);
int scanresult[NCHAN];
int scandisp[NCHAN/PIXSAMPL];
#define PLOT_N 128
#define TICK1 (128/6)
#define TICK2 (TICK1/4)
//#define PLOT_MIN -250
#define PLOT_MIN (sonde.config.noisefloor*2)
#define PLOT_SCALE(x) (x<PLOT_MIN?0:(x-PLOT_MIN)/2)
const byte tilepatterns[9]={0,0x80,0xC0,0xE0,0xF0,0xF8,0xFC,0xFE,0xFF};
void Scanner::fillTiles(uint8_t *row, int value) {
for(int y=0; y<8; y++) {
int nbits = value - 8*(7-y);
if(nbits<0) { row[8*y]=0; continue; }
if(nbits>=8) { row[8*y]=255; continue; }
row[8*y] = tilepatterns[nbits];
}
}
/*
* There are 16*8 columns to plot, NPLOT must be lower than that
* currently, we use 128 * 50kHz channels
* There are 8*8 values to plot; MIN is bottom end,
*/
uint8_t tiles[16] = { 0x0f,0x0f,0x0f,0x0f,0xf0,0xf0,0xf0,0xf0, 1, 3, 7, 15, 31, 63, 127, 255};
void Scanner::plotResult()
{
uint8_t row[8*8];
for(int i=0; i<PLOT_N; i+=8) {
for(int j=0; j<8; j++) {
fillTiles(row+j, PLOT_SCALE(scandisp[i+j]));
if( ((i+j)%TICK1)==0) { row[j] |= 0x07; }
if( ((i+j)%TICK2)==0) { row[j] |= 0x01; }
}
for(int y=0; y<8; y++) {
if(sonde.config.marker && y==1) {
// don't overwrite MHz marker text
if(i<3*8 || (i>=7*8&&i<10*8) || i>=13*8) continue;
}
disp.rdis->drawTile(i/8, y, 1, row+8*y);
}
}
}
void Scanner::scan()
{
// Configure
sx1278.writeRegister(REG_PLL_HOP, 0x80); // FastHopOn
sx1278.setRxBandwidth(CHANBW*1000);
sx1278.writeRegister(REG_RSSI_CONFIG, SMOOTH&0x07);
sx1278.setFrequency(STARTF);
sx1278.writeRegister(REG_OP_MODE, FSK_RX_MODE);
delay(20);
unsigned long start = millis();
uint32_t lastfrf=-1;
for(int iter=0; iter<2; iter++) { // two interations, to catch all RS41 transmissions
for(int i=0; i<NCHAN; i++) {
float freq = STARTF + 1000.0*i*CHANBW;
uint32_t frf = freq * 1.0 * (1<<19) / SX127X_CRYSTAL_FREQ;
if( (lastfrf>>16)!=(frf>>16) ) {
sx1278.writeRegister(REG_FRF_MSB, (frf&0xff0000)>>16);
}
if( ((lastfrf&0x00ff00)>>8) != ((frf&0x00ff00)>>8) ) {
sx1278.writeRegister(REG_FRF_MID, (frf&0x00ff00)>>8);
}
sx1278.writeRegister(REG_FRF_LSB, (frf&0x0000ff));
lastfrf = frf;
// Wait TS_HOP (20us) + TS_RSSI ( 2^(SMOOTH+1) / 4 / CHANBW us)
int wait = 20 + 1000*(1<<(SMOOTH+1))/4/CHANBW;
delayMicroseconds(wait+5);
int rssi = -(int)sx1278.readRegister(REG_RSSI_VALUE_FSK);
if(iter==0) { scanresult[i] = rssi; } else {
if(rssi>scanresult[i]) scanresult[i]=rssi;
}
}
}
unsigned long duration = millis()-start;
Serial.print("Scan time: ");
Serial.println(duration);
for(int i=0; i<NCHAN; i+=PIXSAMPL) {
scandisp[i/PIXSAMPL]=scanresult[i];
for(int j=1; j<PIXSAMPL; j++) { scandisp[i/PIXSAMPL]+=scanresult[i+j]; }
//for(int j=1; j<PIXSAMPL; j++) { if(scanresult[i+j]>scandisp[i/PIXSAMPL]) scandisp[i/PIXSAMPL] = scanresult[i+j]; }
Serial.print(scanresult[i]); Serial.print(", ");
}
Serial.println("\n");
for(int i=0; i<NCHAN/PIXSAMPL; i++) {
scandisp[i]/=PIXSAMPL;
Serial.print(scandisp[i]); Serial.print(", ");
}
Serial.println("\n");
}
Scanner scanner = Scanner();
+24
View File
@@ -0,0 +1,24 @@
#ifndef _SCANNER_H
#define _SCANNER_H
#include <stdlib.h>
#include <stdint.h>
#include <Arduino.h>
#ifndef inttypes_h
#include <inttypes.h>
#endif
class Scanner
{
private:
void fillTiles(uint8_t *row, int value);
public:
void plotResult();
void scan(void);
};
extern Scanner scanner;
#endif
+688
View File
@@ -0,0 +1,688 @@
#include <U8x8lib.h>
#include <U8g2lib.h>
#include "Sonde.h"
#include "RS41.h"
#include "RS92.h"
#include "DFM.h"
#include "M10.h"
#include "SX1278FSK.h"
#include "Display.h"
#include <Wire.h>
extern SX1278FSK sx1278;
RXTask rxtask = { -1, -1, -1, 0xFFFF, 0 };
const char *evstring[]={"NONE", "KEY1S", "KEY1D", "KEY1M", "KEY1L", "KEY2S", "KEY2D", "KEY2M", "KEY2L",
"VIEWTO", "RXTO", "NORXTO", "(max)"};
const char *RXstr[]={"RX_OK", "RX_TIMEOUT", "RX_ERROR", "RX_UNKNOWN"};
int fingerprintValue[]={ 17, 31, 64, 4, 55, 48, 23, 128+23, -1 };
const char *fingerprintText[]={
"TTGO T-Beam (new version 1.0), I2C not working after powerup, assuming 0.9\" OLED@21,22",
"TTGO LORA32 v2.1_1.6 (0.9\" OLED@21,22)",
"TTGO LORA v1.0 (0.9\" OLED@4,15)",
"Heltec v1/v2 (0.9\"OLED@4,15)",
"TTGO T-Beam (old version), 0.9\" OLED@21,22",
"TTGO T-Beam (old version), SPI TFT@4,21,22",
"TTGO T-Beam (new version 1.0), 0.9\" OLED@21,22",
"TTGO T-Beam (new version 1.0), SPI TFT@4,13,14",
};
int getKeyPressEvent(); /* in RX_FSK.ino */
/* Task model:
* There is a background task for all SX1278 interaction.
* - On startup and on each mode/frequency change (requested by setting requestNextSonde
* to an sonde index >=0) it calls Sonde::setup(), which will call the new decoder's
* setup function. Setup will update the value currentSonde.
* - Periodically it calls Sonde::receive(), which calls the current decoder's receive()
* function. It should return control to the SX1278 main loop at least once per second.
* It will also set the internal variable receiveResult. The decoder's receive function
* must make sure that there are no FIFI overflows in the SX1278.
* - the Arduino main loop will call the waitRXcomplete function, which should return as
* soon as there is some new data to display, or no later than after 1s, returning the
* value of receiveResult (or timeout, if receiveResult was not set within 1s). It
* should also return immediately if there is some keyboard input.
*/
int initlevels[40];
Sonde::Sonde() {
for (int i = 0; i < 39; i++) {
initlevels[i] = gpio_get_level((gpio_num_t)i);
}
}
void Sonde::defaultConfig() {
fingerprint = initlevels[4];
fingerprint = (fingerprint<<1) | initlevels[12];
fingerprint = (fingerprint<<1) | initlevels[16];
fingerprint = (fingerprint<<1) | initlevels[17];
fingerprint = (fingerprint<<1) | initlevels[21];
fingerprint = (fingerprint<<1) | initlevels[22];
fingerprint = (fingerprint<<1) | initlevels[23];
Serial.printf("Board fingerprint is %d\n", fingerprint);
sondeList = (SondeInfo *)malloc((MAXSONDE+1)*sizeof(SondeInfo));
memset(sondeList, 0, (MAXSONDE+1)*sizeof(SondeInfo));
config.touch_thresh = 70;
config.led_pout = -1;
config.power_pout = -1;
config.spectrum=10;
// Try autodetecting board type
// Seems like on startup, GPIO4 is 1 on v1 boards, 0 on v2.1 boards?
config.gpsOn=0;
config.gps_rxd = -1;
config.gps_txd = -1;
strcpy(config.gps_lat,"43.591");
strcpy(config.gps_lon,"7.100");
config.gps_alt=123;
config.gps_Lat=0;
config.gps_Lon=0;
config.gps_Alt=0;
config.oled_rst = 16;
config.disptype = 0;
config.oled_orient = 1;
config.button2_axp = 0;
config.norx_timeout = 20;
if(initlevels[16]==0) {
config.oled_sda = 4;
config.oled_scl = 15;
config.button_pin = 0;
config.button2_pin = T4 + 128; // T4 == GPIO13
config.power_pout = 21; // for Heltec v2
config.led_pout = 2;
Serial.println("Autoconfig: looks like TTGO v1 / Heltec v1/V2 board");
} else {
config.oled_sda = 21;
config.oled_scl = 22;
if(initlevels[17]==0) { // T-Beam
if(initlevels[12]==0) { // T-Beam v1.0
Serial.println("Autoconfig: looks like T-Beam 1.0 board");
config.button_pin = 38;
config.button2_pin = 15 + 128; //T4 + 128; // T4 = GPIO13
// Maybe in future use as default only PWR as button2?
//config.button2_pin = 255;
config.button2_axp = 1;
config.gps_rxd = 34;
// Check for I2C-Display@21,22
#define SSD1306_ADDRESS 0x3c
Wire.begin(21, 22);
Wire.beginTransmission(SSD1306_ADDRESS);
byte err = Wire.endTransmission();
delay(100); // otherwise its too fast?!
Wire.beginTransmission(SSD1306_ADDRESS);
err = Wire.endTransmission();
if(err!=0 && fingerprint!=17) { // hmm. 17 after powerup with oled commected and no i2c answer!?!?
fingerprint |= 128;
Serial.println("no I2C display found, assuming large TFT display\n");
// CS=0, RST=14, RS=2, SDA=4, CLK=13
Serial.println("... with large TFT display\n");
config.disptype = 1;
config.oled_sda = 4;
config.oled_scl = 13;
config.oled_rst = 14;
config.spectrum = -1; // no spectrum for now on large display
} else {
// OLED display, pins 21,22 ok...
config.disptype = 0;
Serial.println("... with small OLED display\n");
}
} else {
Serial.println("Autoconfig: looks like T-Beam v0.7 board");
config.button_pin = 39;
config.button2_pin = T4 + 128; // T4 == GPIO13
config.gps_rxd = 12;
// Check if we possibly have a large display
if(initlevels[21]==0) {
Serial.println("Autoconfig: looks like T-Beam v0.7 board with large TFT display");
config.disptype = 1;
config.oled_sda = 4;
config.oled_scl = 21;
config.oled_rst = 22;
config.spectrum = -1; // no spectrum for now on large display
}
}
} else {
config.button_pin = 2 + 128; // GPIO2 / T2
config.button2_pin = 14 + 128; // GPIO14 / T6
config.led_pout = 25;
}
}
//
config.noisefloor = -125;
config.gainLNA=0;
strcpy(config.call,"NOCALL");
strcpy(config.passcode, "---");
strcpy(config.mdnsname, "radiosonde");
strcpy(config.vbatmax,"1.84");
strcpy(config.vbatmin,"1.64");
config.telemetryOn=0;
config.buzzerOn=0;
config.buzzerFreq=700;
config.buzzerPort=12;
config.dbsmetre=0;
config.degdec=0;
config.maxsonde=15;
config.debug=0;
config.wifi=1;
config.wifiap=1;
config.display[0]=0;
config.display[1]=1;
config.display[2]=-1;
config.startfreq=400;
config.channelbw=10;
config.marker=0;
config.showafc=0;
config.freqofs=0;
config.rs41.agcbw=12500;
config.rs41.rxbw=6300;
config.rs92.rxbw=12500;
config.rs92.alt2d=480;
config.dfm.agcbw=20800;
config.dfm.rxbw=10400;
config.udpfeed.active = 1;
config.udpfeed.type = 0;
strcpy(config.udpfeed.host, "fra1od.fr.to");
strcpy(config.udpfeed.symbol, "/O");
config.udpfeed.port = 14580;
config.udpfeed.highrate = 1;
config.udpfeed.idformat = ID_DFMGRAW;
config.tcpfeed.active = 0;
config.tcpfeed.type = 1;
strcpy(config.tcpfeed.host, "radiosondy.info");
strcpy(config.tcpfeed.symbol, "/O");
config.tcpfeed.port = 14580;
config.tcpfeed.highrate = 10;
config.tcpfeed.idformat = ID_DFMDXL;
config.kisstnc.active = 0;
}
void Sonde::setConfig(const char *cfg) {
while(*cfg==' '||*cfg=='\t') cfg++;
if(*cfg=='#') return;
char *s = strchr(cfg,'=');
if(!s) return;
char *val = s+1;
*s=0; s--;
while(s>cfg && (*s==' '||*s=='\t')) { *s=0; s--; }
Serial.printf("configuration option '%s'=%s \n", cfg, val);
if(strcmp(cfg,"noisefloor")==0) {
config.noisefloor = atoi(val);
if(config.noisefloor==0) config.noisefloor=-130;
} else if(strcmp(cfg,"gainLNA")==0) {
config.gainLNA = atoi(val);
} else if(strcmp(cfg,"call")==0) {
strncpy(config.call, val, 9);
config.call[9]=0;
} else if(strcmp(cfg,"passcode")==0) {
strncpy(config.passcode, val, 9);
} else if(strcmp(cfg,"button_pin")==0) {
config.button_pin = atoi(val);
} else if(strcmp(cfg,"button2_pin")==0) {
config.button2_pin = atoi(val);
} else if(strcmp(cfg,"button2_axp")==0) {
config.button2_axp = atoi(val);
} else if(strcmp(cfg,"touch_thresh")==0) {
config.touch_thresh = atoi(val);
} else if(strcmp(cfg,"led_pout")==0) {
config.led_pout = atoi(val);
} else if(strcmp(cfg,"power_pout")==0) {
config.power_pout = atoi(val);
} else if(strcmp(cfg,"disptype")==0) {
config.disptype = atoi(val);
} else if(strcmp(cfg,"oled_sda")==0) {
config.oled_sda = atoi(val);
} else if(strcmp(cfg,"oled_scl")==0) {
config.oled_scl = atoi(val);
} else if(strcmp(cfg,"oled_rst")==0) {
config.oled_rst = atoi(val);
} else if(strcmp(cfg,"oled_orient")==0) {
config.oled_orient = atoi(val);
} else if(strcmp(cfg,"gpsOn")==0) {
config.gpsOn = atoi(val);
} else if(strcmp(cfg,"gps_rxd")==0) {
config.gps_rxd = atoi(val);
} else if(strcmp(cfg,"gps_txd")==0) {
config.gps_txd = atoi(val);
} else if(strcmp(cfg,"gps_lat")==0) {
strncpy(config.gps_lat, val, 8);
} else if(strcmp(cfg,"gps_lon")==0) {
strncpy(config.gps_lon, val, 8);
} else if(strcmp(cfg,"gps_alt")==0) {
config.gps_alt = atoi(val);
} else if(strcmp(cfg,"maxsonde")==0) {
config.maxsonde = atoi(val);
if(config.maxsonde>MAXSONDE) config.maxsonde=MAXSONDE;
} else if(strcmp(cfg,"debug")==0) {
config.debug = atoi(val);
} else if(strcmp(cfg,"wifi")==0) {
config.wifi = atoi(val);
} else if(strcmp(cfg,"wifiap")==0) {
config.wifiap = atoi(val);
} else if(strcmp(cfg,"mdnsname")==0) {
strncpy(config.mdnsname, val, 14);
} else if(strcmp(cfg,"vbatmax")==0) {
strncpy(config.vbatmax,val,5);
} else if(strcmp(cfg,"vbatmin")==0) {
strncpy(config.vbatmin,val,5);
} else if(strcmp(cfg,"telemetryOn")==0) {
config.telemetryOn=atoi(val);
} else if(strcmp(cfg,"buzzerOn")==0) {
config.buzzerOn=atoi(val);
} else if(strcmp(cfg,"buzzerPort")==0) {
config.buzzerPort=atoi(val);
} else if(strcmp(cfg,"buzzerFreq")==0) {
config.buzzerFreq=atoi(val);
} else if(strcmp(cfg,"dbsmetre")==0) {
config.dbsmetre=atoi(val);
} else if(strcmp(cfg,"degdec")==0) {
config.degdec=atoi(val);
} else if(strcmp(cfg,"display")==0) {
int i = 0;
char *ptr;
while(val) {
ptr = strchr(val,',');
if(ptr) *ptr = 0;
config.display[i++] = atoi(val);
val = ptr?ptr+1:NULL;
Serial.printf("appending value %d next is %s\n", config.display[i-1], val?val:"");
}
config.display[i] = -1;
} else if (strcmp(cfg, "norx_timeout")==0) {
config.norx_timeout = atoi(val);
} else if(strcmp(cfg,"startfreq")==0) {
config.startfreq = atoi(val);
} else if(strcmp(cfg,"channelbw")==0) {
config.channelbw = atoi(val);
} else if(strcmp(cfg,"spectrum")==0) {
config.spectrum = atoi(val);
} else if(strcmp(cfg,"marker")==0) {
config.marker = atoi(val);
} else if(strcmp(cfg,"showafc")==0) {
config.showafc = atoi(val);
} else if(strcmp(cfg,"freqofs")==0) {
config.freqofs = atoi(val);
} else if(strcmp(cfg,"rs41.agcbw")==0) {
config.rs41.agcbw = atoi(val);
} else if(strcmp(cfg,"rs41.rxbw")==0) {
config.rs41.rxbw = atoi(val);
} else if(strcmp(cfg,"dfm.agcbw")==0) {
config.dfm.agcbw = atoi(val);
} else if(strcmp(cfg,"dfm.rxbw")==0) {
config.dfm.rxbw = atoi(val);
} else if(strcmp(cfg,"rs92.alt2d")==0) {
config.rs92.alt2d= atoi(val);
} else if(strcmp(cfg,"kisstnc.active")==0) {
config.kisstnc.active = atoi(val);
} else if(strcmp(cfg,"kisstnc.idformat")==0) {
config.kisstnc.idformat = atoi(val);
} else if(strcmp(cfg,"rs92.rxbw")==0) {
config.rs92.rxbw = atoi(val);
} else if(strcmp(cfg,"axudp.active")==0) {
config.udpfeed.active = atoi(val)>0;
} else if(strcmp(cfg,"axudp.host")==0) {
strncpy(config.udpfeed.host, val, 63);
} else if(strcmp(cfg,"axudp.port")==0) {
config.udpfeed.port = atoi(val);
} else if(strcmp(cfg,"axudp.symbol")==0) {
strncpy(config.udpfeed.symbol, val, 3);
} else if(strcmp(cfg,"axudp.highrate")==0) {
config.udpfeed.highrate = atoi(val);
} else if(strcmp(cfg,"axudp.idformat")==0) {
config.udpfeed.idformat = atoi(val);
} else if(strcmp(cfg,"tcp.active")==0) {
config.tcpfeed.active = atoi(val)>0;
} else if(strcmp(cfg,"tcp.host")==0) {
strncpy(config.tcpfeed.host, val, 63);
} else if(strcmp(cfg,"tcp.port")==0) {
config.tcpfeed.port = atoi(val);
} else if(strcmp(cfg,"tcp.symbol")==0) {
strncpy(config.tcpfeed.symbol, val, 3);
} else if(strcmp(cfg,"tcp.highrate")==0) {
config.tcpfeed.highrate = atoi(val);
} else if(strcmp(cfg,"tcp.idformat")==0) {
config.tcpfeed.idformat = atoi(val);
} else {
Serial.printf("Invalid config option '%s'=%s \n", cfg, val);
}
}
void Sonde::setIP(String ip, bool AP) {
ipaddr = ip;
isAP = AP;
}
void Sonde::clearSonde() {
nSonde = 0;
}
void Sonde::addSonde(float frequency, SondeType type, int active, char *launchsite) {
if(nSonde>=config.maxsonde) {
Serial.println("Cannot add another sonde, MAXSONDE reached");
return;
}
Serial.printf("Adding %f - %d - %d - %s\n", frequency, type, active, launchsite);
sondeList[nSonde].type = type;
sondeList[nSonde].freq = frequency;
sondeList[nSonde].active = active;
strncpy(sondeList[nSonde].launchsite, launchsite, 17);
memcpy(sondeList[nSonde].rxStat, "\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3\x3", 18); // unknown/undefined
nSonde++;
}
// called by updateState (only)
void Sonde::nextConfig() {
currentSonde++;
if(currentSonde>=nSonde) {
currentSonde=0;
}
// Skip non-active entries (but don't loop forever if there are no active ones)
for(int i=0; i<config.maxsonde; i++) {
if(!sondeList[currentSonde].active) {
currentSonde++;
if(currentSonde>=nSonde) currentSonde=0;
}
}
}
void Sonde::nextRxSonde() {
rxtask.currentSonde++;
if(rxtask.currentSonde>=nSonde) {
rxtask.currentSonde=0;
}
for(int i=0; i<config.maxsonde; i++) {
if(!sondeList[rxtask.currentSonde].active) {
rxtask.currentSonde++;
if(rxtask.currentSonde>=nSonde) rxtask.currentSonde=0;
}
}
Serial.printf("nextRxSonde: %d\n", rxtask.currentSonde);
}
void Sonde::nextRxFreq(int addkhz) {
// last entry is for the variable frequency
rxtask.currentSonde = nSonde - 1;
sondeList[rxtask.currentSonde].active = 1;
sondeList[rxtask.currentSonde].freq += addkhz*0.001;
if(sondeList[rxtask.currentSonde].freq>406)
sondeList[rxtask.currentSonde].freq = 400;
Serial.printf("nextRxFreq: %d\n", rxtask.currentSonde);
}
SondeInfo *Sonde::si() {
return &sondeList[currentSonde];
}
void Sonde::setup() {
if(rxtask.currentSonde<0 || rxtask.currentSonde>=config.maxsonde) {
Serial.print("Invalid rxtask.currentSonde: ");
Serial.println(rxtask.currentSonde);
rxtask.currentSonde = 0;
}
// update receiver config
Serial.print("\nSonde::setup() on sonde index ");
Serial.println(rxtask.currentSonde);
switch(sondeList[rxtask.currentSonde].type) {
case STYPE_RS41:
rs41.setup(sondeList[rxtask.currentSonde].freq * 1000000);
break;
case STYPE_DFM06:
case STYPE_DFM09:
dfm.setup( sondeList[rxtask.currentSonde].freq * 1000000, sondeList[rxtask.currentSonde].type==STYPE_DFM06?0:1 );
break;
case STYPE_RS92:
rs92.setup( sondeList[rxtask.currentSonde].freq * 1000000);
break;
case STYPE_M10:
m10.setup( sondeList[rxtask.currentSonde].freq * 1000000);
break;
}
// debug
float afcbw = sx1278.getAFCBandwidth();
float rxbw = sx1278.getRxBandwidth();
Serial.printf("AFC BW: %f RX BW: %f\n", afcbw, rxbw);
}
extern void flashLed(int ms);
extern void buzzerLed(int temps);
void Sonde::receive() {
uint16_t res = 0;
SondeInfo *si = &sondeList[rxtask.currentSonde];
switch(si->type) {
case STYPE_RS41:
res = rs41.receive();
break;
case STYPE_RS92:
res = rs92.receive();
break;
case STYPE_M10:
res = m10.receive();
break;
case STYPE_DFM06:
case STYPE_DFM09:
res = dfm.receive();
break;
}
// state information for RX_TIMER / NORX_TIMER events
if(res==0) { // RX OK
flashLed(700);
if(sonde.config.buzzerOn==1) {
buzzerLed(500);
}
if(si->lastState != 1) {
si->rxStart = millis();
si->lastState = 1;
}
} else { // RX not ok
if(res==RX_ERROR) {
flashLed(100);
}
Serial.printf("RX result %d, laststate was %d\n", res, si->lastState);
if(si->lastState != 0) {
si->norxStart = millis();
si->lastState = 0;
}
}
// Serial.printf("debug: res was %d, now lastState is %d\n", res, si->lastState);
// we should handle timer events here, because after returning from receive,
// we'll directly enter setup
rxtask.receiveSonde = rxtask.currentSonde; // pass info about decoded sonde to main loop
int event = getKeyPressEvent();
if (!event) event = timeoutEvent(si);
int action = (event==EVT_NONE) ? ACT_NONE : disp.layout->actions[event];
Serial.printf("event %x: action is %x\n", event, action);
// If action is to move to a different sonde index, we do update things here, set activate
// to force the sx1278 task to call sonde.setup(), and pass information about sonde to
// main loop (display update...)
if(action == ACT_NEXTSONDE || action==ACT_PREVSONDE || (action>64&&action<128) ) {
// handled here...
if(action==ACT_NEXTSONDE||action==ACT_PREVSONDE)
nextRxSonde();
else
nextRxFreq( action-64 );
action = ACT_SONDE(rxtask.currentSonde);
if(rxtask.activate==-1) {
// race condition here. maybe better use mutex. TODO
rxtask.activate = action;
}
}
res = (action<<8) | (res&0xff);
Serial.printf("receive Result is %04x\n", res);
// let waitRXcomplete resume...
rxtask.receiveResult = res;
}
// return (action<<8) | (rxresult)
uint16_t Sonde::waitRXcomplete() {
uint16_t res=0;
uint32_t t0 = millis();
rxloop:
while( rxtask.receiveResult==0xFFFF && millis()-t0 < 3000) { delay(50); }
if( rxtask.receiveResult == RX_UPDATERSSI ) {
rxtask.receiveResult = 0xFFFF;
Serial.print("RSSI update: ");
disp.updateDisplayRSSI();
goto rxloop;
}
if( rxtask.receiveResult==0xFFFF) {
Serial.println("TIMEOUT in waitRXcomplete. Should never happen!\n");
res = RX_TIMEOUT;
} else {
res = rxtask.receiveResult;
}
rxtask.receiveResult = 0xFFFF;
/// TODO: THis has caused an exception when swithcing back to spectrumm...
Serial.printf("waitRXcomplete returning %04x (%s)\n", res, (res&0xff)<4?RXstr[res&0xff]:"");
// currently used only by RS92
switch(sondeList[rxtask.receiveSonde].type) {
case STYPE_RS41:
rs41.waitRXcomplete();
break;
case STYPE_RS92:
rs92.waitRXcomplete();
break;
case STYPE_M10:
m10.waitRXcomplete();
break;
case STYPE_DFM06:
case STYPE_DFM09:
dfm.waitRXcomplete();
break;
}
memmove(sonde.si()->rxStat+1, sonde.si()->rxStat, 17);
sonde.si()->rxStat[0] = res;
return res;
}
uint8_t Sonde::timeoutEvent(SondeInfo *si) {
uint32_t now = millis();
#if 1
Serial.printf("Timeout check: %d - %d vs %d; %d - %d vs %d; %d - %d vs %d\n",
now, si->viewStart, disp.layout->timeouts[0],
now, si->rxStart, disp.layout->timeouts[1],
now, si->norxStart, disp.layout->timeouts[2]);
#endif
Serial.printf("lastState is %d\n", si->lastState);
if(disp.layout->timeouts[0]>=0 && now - si->viewStart >= disp.layout->timeouts[0]) {
Serial.println("View timer expired");
return EVT_VIEWTO;
}
if(si->lastState==1 && disp.layout->timeouts[1]>=0 && now - si->rxStart >= disp.layout->timeouts[1]) {
Serial.println("RX timer expired");
return EVT_RXTO;
}
if(si->lastState==0 && disp.layout->timeouts[2]>=0 && now - si->norxStart >= disp.layout->timeouts[2]) {
Serial.println("NORX timer expired");
return EVT_NORXTO;
}
return 0;
}
uint8_t Sonde::updateState(uint8_t event) {
Serial.printf("Sonde::updateState for event %d\n", event);
// No change
if(event==ACT_NONE) return 0xFF;
// In all cases (new display mode, new sonde) we reset the mode change timers
sonde.sondeList[sonde.currentSonde].viewStart = millis();
sonde.sondeList[sonde.currentSonde].lastState = -1;
// Moving to a different display mode
if (event==ACT_DISPLAY_SPECTRUM || event==ACT_DISPLAY_WIFI) {
// main loop will call setMode() and disable sx1278 background task
return event;
}
int n = event;
if(event==ACT_DISPLAY_DEFAULT) {
n = config.display[1];
} else if(event==ACT_DISPLAY_SCANNER) {
n= config.display[0];
} else if(event==ACT_DISPLAY_NEXT) {
int i;
for(i=0; config.display[i]!=-1; i++) {
if(config.display[i] == disp.layoutIdx) break;
}
if(config.display[i]==-1 || config.display[i+1]==-1) {
//unknown index, or end of list => loop to start
n = config.display[1];
} else {
n = config.display[i+1];
}
}
if(n>=0 && n<ACT_MAXDISPLAY) {
if(n>=disp.nLayouts) {
Serial.println("WARNNG: next layout out of range");
n = config.display[1];
}
Serial.printf("Setting display mode %d\n", n);
disp.setLayout(n);
sonde.clearDisplay();
return 0xFF;
}
// Moving to a different value for currentSonde
// TODO: THis should be done in sx1278 task, not in main loop!!!!!
if(event==ACT_NEXTSONDE) {
sonde.nextConfig();
Serial.printf("advancing to next sonde %d\n", sonde.currentSonde);
return event;
}
if (event==ACT_PREVSONDE) {
// TODO
Serial.printf("previous not supported, advancing to next sonde\n");
sonde.nextConfig();
return ACT_NEXTSONDE;
}
if(event&0x80) {
sonde.currentSonde = (event&0x7F);
return ACT_NEXTSONDE;
}
return 0xFF;
}
void Sonde::updateDisplayPos() {
disp.updateDisplayPos();
}
void Sonde::updateDisplayPos2() {
disp.updateDisplayPos2();
}
void Sonde::updateDisplayID() {
disp.updateDisplayID();
}
void Sonde::updateDisplayRSSI() {
disp.updateDisplayRSSI();
}
void Sonde::updateStat() {
disp.updateStat();
}
void Sonde::updateDisplayRXConfig() {
disp.updateDisplayRXConfig();
}
void Sonde::updateDisplayIP() {
disp.updateDisplayIP();
}
void Sonde::updateDisplay()
{
int t = millis();
disp.updateDisplay();
Serial.printf("updateDisplay took %d ms\n", (int)(millis()-t));
}
void Sonde::clearDisplay() {
disp.rdis->clear();
}
Sonde sonde = Sonde();
+271
View File
@@ -0,0 +1,271 @@
#ifndef Sonde_h
#define Sonde_h
// RX_TIMEOUT: no header detected
// RX_ERROR: header detected, but data not decoded (crc error, etc.)
// RX_OK: header and data ok
enum RxResult { RX_OK, RX_TIMEOUT, RX_ERROR, RX_UNKNOWN, RX_NOPOS };
#define RX_UPDATERSSI 0xFFFE
// Events that change what is displayed (mode, sondenr)
// Keys:
// 1 Button (short) or Touch (short)
// 2 Button (double) or Touch (double)
// 3 Button (mid) or Touch (mid)
// 4 Button (long) or Touch (long)
// 5 Touch1/2 (short)
// 6 Touch1/2 (double)
// 7 Touch1/2 (mid)
// 8 Touch1/2 (long)
/* Keypress => Sonde++ / Sonde-- / Display:=N*/
enum Events { EVT_NONE, EVT_KEY1SHORT, EVT_KEY1DOUBLE, EVT_KEY1MID, EVT_KEY1LONG,
EVT_KEY2SHORT, EVT_KEY2DOUBLE, EVT_KEY2MID, EVT_KEY2LONG,
EVT_VIEWTO, EVT_RXTO, EVT_NORXTO,
EVT_MAX };
extern const char *evstring[];
extern const char *RXstr[];
#define EVENTNAME(s) evstring[s]
//int8_t actions[EVT_MAX];
#define ACT_NONE 255
#define ACT_DISPLAY(n) (n)
#define ACT_MAXDISPLAY 50
#define ACT_DISPLAY_SCANNER 0
#define ACT_DISPLAY_NEXT 64
#define ACT_DISPLAY_DEFAULT 63
#define ACT_DISPLAY_SPECTRUM 62
#define ACT_DISPLAY_WIFI 61
#define ACT_NEXTSONDE 65
#define ACT_PREVSONDE 66
#define ACT_ADDFREQ(n) ((n)+64)
#define ACT_SONDE(n) ((n)+128)
// 0000nnnn => goto display nnnn
// 01000000 => goto sonde -1
// 01000001 => goto sonde +1
#define NSondeTypes 5
enum SondeType { STYPE_DFM06, STYPE_DFM09, STYPE_RS41, STYPE_RS92, STYPE_M10 };
extern const char *sondeTypeStr[NSondeTypes];
typedef struct st_sondeinfo {
// receiver configuration
bool active;
SondeType type;
float freq;
// decoded ID
char id[10];
char ser[12];
bool validID;
char launchsite[18];
// decoded position
float lat; // latitude
float lon; // longitude
float az; // azimut
float vbat; // vbat %
int durvolheure; // duree vol heure
int durvolminute; // duree vol minute
int durvolseconde; // duree vol seconde
float alt; // altitude
float vs; // vertical speed
float hs; // horizontal speed
float dir; // 0..360
uint8_t sats; // number of sats
uint8_t validPos; // bit pattern for validity of above 7 fields; 0x80: position is old
// decoded GPS time
uint32_t time;
uint16_t sec;
uint32_t frame;
bool validTime;
// RSSI from receiver
int rssi; // signal strength
int32_t afc; // afc correction value
// statistics
uint8_t rxStat[20];
uint32_t rxStart; // millis() timestamp of continuous rx start
uint32_t norxStart; // millis() timestamp of continuous no rx start
uint32_t viewStart; // millis() timestamp of viewinf this sonde with current display
int8_t lastState; // -1: disabled; 0: norx; 1: rx
// shut down timers, currently only for RS41; -1=disabled
int16_t launchKT, burstKT, countKT;
uint16_t crefKT; // frame number in which countKT was last sent
} SondeInfo;
// rxStat: 3=undef[empty] 1=timeout[.] 2=errro[E] 0=ok[|] 4=no valid position[°]
// Used for interacting with the RX background task
typedef struct st_RXTask {
// Variables set by Arduino main loop to value >=0 for requesting
// mode change to sonde reception for sonde <value) in RXTask.
// Will be reset to -1 by RXTask
int activate;
// Variables set by RXTask, corresponding to mode ST_DECODER (if active) or something else,
// and currently received sonde
int mainState;
int currentSonde;
// Variable set by RXTask to communicate status to Arduino task
// via waitRXcomplete function
uint16_t receiveResult;
uint16_t receiveSonde; // sonde inde corresponding to receiveResult
// status variabe set by decoder to indicate something is broken
// int fifoOverflow;
} RXTask;
extern RXTask rxtask;
struct st_rs41config {
int agcbw;
int rxbw;
};
struct st_rs92config {
int rxbw;
int alt2d;
};
struct st_dfmconfig {
int agcbw;
int rxbw;
};
enum IDTYPE { ID_DFMDXL, ID_DFMGRAW, ID_DFMAUTO };
struct st_feedinfo {
bool active;
int type; // 0:UDP(axudp), 1:TCP(aprs.fi)
char host[64];
int port;
char symbol[3];
int lowrate;
int highrate;
int lowlimit;
int idformat; // 0: dxl 1: real 2: auto
};
// maybe extend for external Bluetooth interface?
// internal bluetooth consumes too much memory
struct st_kisstnc {
bool active;
int idformat;
};
typedef struct st_rdzconfig {
// hardware configuration
int button_pin; // PIN port number menu button (+128 for touch mode)
int button2_pin; // PIN port number menu button (+128 for touch mode)
int button2_axp; // Use AXP192 power button as button2
int touch_thresh; // Threshold value (0..100) for touch input button
int led_pout; // POUT port number of LED (used as serial monitor)
int power_pout; // Power control pin (for Heltec v2)
int disptype; // 0=OLED; 1=ILI9225
int oled_sda; // OLED data pin
int oled_scl; // OLED clock pin
int oled_rst; // OLED reset pin
int oled_orient; // OLED orientation (default: 1)
int gpsOn; // GPS Active On=1/Off=0
int gps_rxd; // GPS module RXD pin. We expect 9600 baud NMEA data.
int gps_txd; // GPS module TXD pin
char gps_lat[20]; // QTH no gps latitude
char gps_lon[20]; // QTH no gps longitude
int gps_alt; // QTH no gps altitude
float gps_Lat,gps_Lon, gps_Alt; // QTH gps OM lat, lon, alt
// software configuration
int debug; // show port and config options after reboot
int wifi; // connect to known WLAN 0=skip
int wifiap; // enable/disable WiFi AccessPoint mode 0=disable
int8_t display[30]; // list of display mode (0:scanner, 1:default, 2,... additional modes)
int startfreq; // spectrum display start freq (400, 401, ...)
int channelbw; // spectrum channel bandwidth (valid: 5, 10, 20, 25, 50, 100 kHz)
int spectrum; // show freq spectrum for n seconds -1=disable; 0=forever
int marker; // show freq marker in spectrum 0=disable
int maxsonde; // number of max sonde in scan (range=1-99)
int norx_timeout; // Time after which rx mode switches to scan mode (without rx signal)
int noisefloor; // for spectrum display
int gainLNA;
char mdnsname[15]; // mDNS-Name, defaults to radiosonde
char vbatmax[5]; // Vbat maxi when bat charged
char vbatmin[5]; // Vbat minimum discharged
int telemetryOn; // Active Save information telemetry
int buzzerPort; // Buzzer port
int buzzerFreq; // Buzzer Frequency
int buzzerOn; // Buzzer On
int dbsmetre; // Db or Smetre display
int degdec; // Degres or Decimal 0=decimal 1=degres
// receiver configuration
int showafc; // show afc value in rx screen
int freqofs; // frequency offset (tuner config = rx frequency + freqofs) in Hz
struct st_rs41config rs41; // configuration options specific for RS41 receiver
struct st_rs92config rs92;
struct st_dfmconfig dfm;
// data feed configuration
// for now, one feed for each type is enough, but might get extended to more?
char call[10]; // APRS callsign
char passcode[9]; // APRS passcode
struct st_feedinfo udpfeed; // target for AXUDP messages
struct st_feedinfo tcpfeed; // target for APRS-IS TCP connections
struct st_kisstnc kisstnc; // target for KISS TNC (via TCP, mainly for APRSdroid)
} RDZConfig;
#define MAXSONDE 99
extern int fingerprintValue[];
extern const char *fingerprintText[];
class Sonde
{
private:
public:
RDZConfig config;
int fingerprint = 0;
int currentSonde = 0;
int nSonde;
String ipaddr;
bool isAP;
// moved to heap, saving space in .bss
//SondeInfo sondeList[MAXSONDE+1];
SondeInfo *sondeList;
Sonde();
void defaultConfig();
void setConfig(const char *str);
void clearSonde();
void addSonde(float frequency, SondeType type, int active, char *launchsite);
void nextConfig();
void nextRxSonde();
void nextRxFreq(int addkhz);
/* new interface */
void setup();
void receive();
uint16_t waitRXcomplete();
/* old and temp interface */
#if 0
void processRXbyte(uint8_t data);
int receiveFrame();
#endif
SondeInfo *si();
uint8_t timeoutEvent(SondeInfo *si);
uint8_t updateState(uint8_t event);
void updateDisplayPos();
void updateDisplayPos2();
void updateDisplayID();
void updateDisplayRSSI();
void updateDisplayRXConfig();
void updateStat();
void updateDisplayIP();
void updateDisplay();
void clearDisplay();
void setIP(String ip, bool isAP);
};
extern Sonde sonde;
#endif
+1412
View File
File diff suppressed because it is too large Load Diff
+468
View File
@@ -0,0 +1,468 @@
// SPDX-License-Identifier: GPL-3.0
// original source: https://github.com/Nkawu/TFT22_ILI9225
#ifndef TFT22_ILI9225_h
#define TFT22_ILI9225_h
#ifdef __STM32F1__
#define ARDUINO_STM32_FEATHER
#define PROGMEM
// if 'SPI_CHANNEL' is not defined, 'SPI' is used, only valid for STM32F1
//#define SPI_CHANNEL SPI_2
#endif
#define USE_STRING_CLASS
#ifdef USE_STRING_CLASS
#define STRING String
#else
#define STRING const char *
#endif
#if ARDUINO >= 100
#include "Arduino.h"
#else
#include "WProgram.h"
#endif
#include <SPI.h>
#include "gfxfont.h"
#if defined(ARDUINO_STM32_FEATHER) || defined(ARDUINO_ARCH_STM32) || defined(ARDUINO_ARCH_STM32F1) || defined(STM32F1)
typedef volatile uint32 RwReg;
#endif
#if defined(ARDUINO_FEATHER52)
typedef volatile uint32_t RwReg;
#endif
/* ILI9225 screen size */
#define ILI9225_LCD_WIDTH 176
#define ILI9225_LCD_HEIGHT 220
/* ILI9225 LCD Registers */
#define ILI9225_DRIVER_OUTPUT_CTRL (0x01u) // Driver Output Control
#define ILI9225_LCD_AC_DRIVING_CTRL (0x02u) // LCD AC Driving Control
#define ILI9225_ENTRY_MODE (0x03u) // Entry Mode
#define ILI9225_DISP_CTRL1 (0x07u) // Display Control 1
#define ILI9225_BLANK_PERIOD_CTRL1 (0x08u) // Blank Period Control
#define ILI9225_FRAME_CYCLE_CTRL (0x0Bu) // Frame Cycle Control
#define ILI9225_INTERFACE_CTRL (0x0Cu) // Interface Control
#define ILI9225_OSC_CTRL (0x0Fu) // Osc Control
#define ILI9225_POWER_CTRL1 (0x10u) // Power Control 1
#define ILI9225_POWER_CTRL2 (0x11u) // Power Control 2
#define ILI9225_POWER_CTRL3 (0x12u) // Power Control 3
#define ILI9225_POWER_CTRL4 (0x13u) // Power Control 4
#define ILI9225_POWER_CTRL5 (0x14u) // Power Control 5
#define ILI9225_VCI_RECYCLING (0x15u) // VCI Recycling
#define ILI9225_RAM_ADDR_SET1 (0x20u) // Horizontal GRAM Address Set
#define ILI9225_RAM_ADDR_SET2 (0x21u) // Vertical GRAM Address Set
#define ILI9225_GRAM_DATA_REG (0x22u) // GRAM Data Register
#define ILI9225_GATE_SCAN_CTRL (0x30u) // Gate Scan Control Register
#define ILI9225_VERTICAL_SCROLL_CTRL1 (0x31u) // Vertical Scroll Control 1 Register
#define ILI9225_VERTICAL_SCROLL_CTRL2 (0x32u) // Vertical Scroll Control 2 Register
#define ILI9225_VERTICAL_SCROLL_CTRL3 (0x33u) // Vertical Scroll Control 3 Register
#define ILI9225_PARTIAL_DRIVING_POS1 (0x34u) // Partial Driving Position 1 Register
#define ILI9225_PARTIAL_DRIVING_POS2 (0x35u) // Partial Driving Position 2 Register
#define ILI9225_HORIZONTAL_WINDOW_ADDR1 (0x36u) // Horizontal Address Start Position
#define ILI9225_HORIZONTAL_WINDOW_ADDR2 (0x37u) // Horizontal Address End Position
#define ILI9225_VERTICAL_WINDOW_ADDR1 (0x38u) // Vertical Address Start Position
#define ILI9225_VERTICAL_WINDOW_ADDR2 (0x39u) // Vertical Address End Position
#define ILI9225_GAMMA_CTRL1 (0x50u) // Gamma Control 1
#define ILI9225_GAMMA_CTRL2 (0x51u) // Gamma Control 2
#define ILI9225_GAMMA_CTRL3 (0x52u) // Gamma Control 3
#define ILI9225_GAMMA_CTRL4 (0x53u) // Gamma Control 4
#define ILI9225_GAMMA_CTRL5 (0x54u) // Gamma Control 5
#define ILI9225_GAMMA_CTRL6 (0x55u) // Gamma Control 6
#define ILI9225_GAMMA_CTRL7 (0x56u) // Gamma Control 7
#define ILI9225_GAMMA_CTRL8 (0x57u) // Gamma Control 8
#define ILI9225_GAMMA_CTRL9 (0x58u) // Gamma Control 9
#define ILI9225_GAMMA_CTRL10 (0x59u) // Gamma Control 10
#define ILI9225C_INVOFF 0x20
#define ILI9225C_INVON 0x21
// autoincrement modes (register ILI9225_ENTRY_MODE, bit 5..3 )
enum autoIncMode_t { R2L_BottomUp, BottomUp_R2L, L2R_BottomUp, BottomUp_L2R, R2L_TopDown, TopDown_R2L, L2R_TopDown, TopDown_L2R };
/* RGB 16-bit color table definition (RG565) */
#define COLOR_BLACK 0x0000 /* 0, 0, 0 */
#define COLOR_WHITE 0xFFFF /* 255, 255, 255 */
#define COLOR_BLUE 0x001F /* 0, 0, 255 */
#define COLOR_GREEN 0x07E0 /* 0, 255, 0 */
#define COLOR_RED 0xF800 /* 255, 0, 0 */
#define COLOR_NAVY 0x000F /* 0, 0, 128 */
#define COLOR_DARKBLUE 0x0011 /* 0, 0, 139 */
#define COLOR_DARKGREEN 0x03E0 /* 0, 128, 0 */
#define COLOR_DARKCYAN 0x03EF /* 0, 128, 128 */
#define COLOR_CYAN 0x07FF /* 0, 255, 255 */
#define COLOR_TURQUOISE 0x471A /* 64, 224, 208 */
#define COLOR_INDIGO 0x4810 /* 75, 0, 130 */
#define COLOR_DARKRED 0x8000 /* 128, 0, 0 */
#define COLOR_OLIVE 0x7BE0 /* 128, 128, 0 */
#define COLOR_GRAY 0x8410 /* 128, 128, 128 */
#define COLOR_GREY 0x8410 /* 128, 128, 128 */
#define COLOR_SKYBLUE 0x867D /* 135, 206, 235 */
#define COLOR_BLUEVIOLET 0x895C /* 138, 43, 226 */
#define COLOR_LIGHTGREEN 0x9772 /* 144, 238, 144 */
#define COLOR_DARKVIOLET 0x901A /* 148, 0, 211 */
#define COLOR_YELLOWGREEN 0x9E66 /* 154, 205, 50 */
#define COLOR_BROWN 0xA145 /* 165, 42, 42 */
#define COLOR_DARKGRAY 0x7BEF /* 128, 128, 128 */
#define COLOR_DARKGREY 0x7BEF /* 128, 128, 128 */
#define COLOR_SIENNA 0xA285 /* 160, 82, 45 */
#define COLOR_LIGHTBLUE 0xAEDC /* 172, 216, 230 */
#define COLOR_GREENYELLOW 0xAFE5 /* 173, 255, 47 */
#define COLOR_SILVER 0xC618 /* 192, 192, 192 */
#define COLOR_LIGHTGRAY 0xC618 /* 192, 192, 192 */
#define COLOR_LIGHTGREY 0xC618 /* 192, 192, 192 */
#define COLOR_LIGHTCYAN 0xE7FF /* 224, 255, 255 */
#define COLOR_VIOLET 0xEC1D /* 238, 130, 238 */
#define COLOR_AZUR 0xF7FF /* 240, 255, 255 */
#define COLOR_BEIGE 0xF7BB /* 245, 245, 220 */
#define COLOR_MAGENTA 0xF81F /* 255, 0, 255 */
#define COLOR_TOMATO 0xFB08 /* 255, 99, 71 */
#define COLOR_GOLD 0xFEA0 /* 255, 215, 0 */
#define COLOR_ORANGE 0xFD20 /* 255, 165, 0 */
#define COLOR_SNOW 0xFFDF /* 255, 250, 250 */
#define COLOR_YELLOW 0xFFE0 /* 255, 255, 0 */
/* Font defines */
#define FONT_HEADER_SIZE 4 // 1: pixel width of 1 font character, 2: pixel height,
#define readFontByte(x) pgm_read_byte(&cfont.font[x])
extern uint8_t Terminal6x8[];
extern uint8_t Terminal11x16[];
extern uint8_t Terminal12x16[];
extern uint8_t Trebuchet_MS16x21[];
struct _currentFont
{
uint8_t* font;
uint8_t width;
uint8_t height;
uint8_t offset;
uint8_t numchars;
uint8_t nbrows;
bool monoSp;
};
#define MONOSPACE 1
#if defined (ARDUINO_STM32_FEATHER)
#undef USE_FAST_PINIO
#elif defined (__AVR__) || defined(TEENSYDUINO) || defined(ESP8266) || defined(__arm__)
#define USE_FAST_PINIO
#endif
/// Main and core class
class TFT22_ILI9225 {
public:
TFT22_ILI9225(int8_t RST, int8_t RS, int8_t CS, int8_t SDI, int8_t CLK, int8_t LED);
TFT22_ILI9225(int8_t RST, int8_t RS, int8_t CS, int8_t LED);
TFT22_ILI9225(int8_t RST, int8_t RS, int8_t CS, int8_t SDI, int8_t CLK, int8_t LED, uint8_t brightness);
TFT22_ILI9225(int8_t RST, int8_t RS, int8_t CS, int8_t LED, uint8_t brightness);
/// Initialization
#ifndef ESP32
void begin(void);
#else
void begin(SPIClass &spi=SPI);
#endif
/// Clear the screen
void clear(void);
/// Invert screen
/// @param flag true to invert, false for normal screen
void invert(boolean flag);
/// Switch backlight on or off
/// @param flag true=on, false=off
void setBacklight(boolean flag);
/// Set backlight brightness
/// @param brightness sets backlight brightness 0-255
void setBacklightBrightness(uint8_t brightness);
/// Switch display on or off
/// @param flag true=on, false=off
void setDisplay(boolean flag);
/// Set orientation
/// @param orientation orientation, 0=portrait, 1=right rotated landscape, 2=reverse portrait, 3=left rotated landscape
void setOrientation(uint8_t orientation);
/// Get orientation
/// @return orientation orientation, 0=portrait, 1=right rotated landscape, 2=reverse portrait, 3=left rotated landscape
uint8_t getOrientation(void);
/// Font size, x-axis
/// @return horizontal size of current font, in pixels
// uint8_t fontX(void);
/// Font size, y-axis
/// @return vertical size of current font, in pixels
// uint8_t fontY(void);
/// Screen size, x-axis
/// @return horizontal size of the screen, in pixels
/// @note 240 means 240 pixels and thus 0..239 coordinates (decimal)
uint16_t maxX(void);
/// Screen size, y-axis
/// @return vertical size of the screen, in pixels
/// @note 220 means 220 pixels and thus 0..219 coordinates (decimal)
uint16_t maxY(void);
/// Draw circle
/// @param x0 center, point coordinate, x-axis
/// @param y0 center, point coordinate, y-axis
/// @param radius radius
/// @param color 16-bit color
void drawCircle(uint16_t x0, uint16_t y0, uint16_t radius, uint16_t color);
/// Draw solid circle
/// @param x0 center, point coordinate, x-axis
/// @param y0 center, point coordinate, y-axis
/// @param radius radius
/// @param color 16-bit color
void fillCircle(uint8_t x0, uint8_t y0, uint8_t radius, uint16_t color);
/// Set background color
/// @param color background color, default=black
void setBackgroundColor(uint16_t color = COLOR_BLACK);
/// Draw line, rectangle coordinates
/// @param x1 start point coordinate, x-axis
/// @param y1 start point coordinate, y-axis
/// @param x2 end point coordinate, x-axis
/// @param y2 end point coordinate, y-axis
/// @param color 16-bit color
void drawLine(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t color);
/// Draw rectangle, rectangle coordinates
/// @param x1 top left coordinate, x-axis
/// @param y1 top left coordinate, y-axis
/// @param x2 bottom right coordinate, x-axis
/// @param y2 bottom right coordinate, y-axis
/// @param color 16-bit color
void drawRectangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t color);
/// Draw solid rectangle, rectangle coordinates
/// @param x1 top left coordinate, x-axis
/// @param y1 top left coordinate, y-axis
/// @param x2 bottom right coordinate, x-axis
/// @param y2 bottom right coordinate, y-axis
/// @param color 16-bit color
void fillRectangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t color);
/// Draw pixel
/// @param x1 point coordinate, x-axis
/// @param y1 point coordinate, y-axis
/// @param color 16-bit color
void drawPixel(uint16_t x1, uint16_t y1, uint16_t color);
/// Draw ASCII Text (pixel coordinates)
/// @param x point coordinate, x-axis
/// @param y point coordinate, y-axis
/// @param s text string
/// @param color 16-bit color, default=white
/// @return x-position behind text
uint16_t drawText(uint16_t x, uint16_t y, STRING s, uint16_t color = COLOR_WHITE);
/// width of an ASCII Text (pixel )
/// @param s text string
uint16_t getTextWidth( STRING s ) ;
/// Calculate 16-bit color from 8-bit Red-Green-Blue components
/// @param red red component, 0x00..0xff
/// @param green green component, 0x00..0xff
/// @param blue blue component, 0x00..0xff
/// @return 16-bit color
uint16_t setColor(uint8_t red, uint8_t green, uint8_t blue);
/// Calculate 8-bit Red-Green-Blue components from 16-bit color
/// @param rgb 16-bit color
/// @param red red component, 0x00..0xff
/// @param green green component, 0x00..0xff
/// @param blue blue component, 0x00..0xff
void splitColor(uint16_t rgb, uint8_t &red, uint8_t &green, uint8_t &blue);
/// Draw triangle, triangle coordinates
/// @param x1 corner 1 coordinate, x-axis
/// @param y1 corner 1 coordinate, y-axis
/// @param x2 corner 2 coordinate, x-axis
/// @param y2 corner 2 coordinate, y-axis
/// @param x3 corner 3 coordinate, x-axis
/// @param y3 corner 3 coordinate, y-axis
/// @param color 16-bit color
void drawTriangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t x3, uint16_t y3, uint16_t color);
/// Draw solid triangle, triangle coordinates
/// @param x1 corner 1 coordinate, x-axis
/// @param y1 corner 1 coordinate, y-axis
/// @param x2 corner 2 coordinate, x-axis
/// @param y2 corner 2 coordinate, y-axis
/// @param x3 corner 3 coordinate, x-axis
/// @param y3 corner 3 coordinate, y-axis
/// @param color 16-bit color
void fillTriangle(uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2, uint16_t x3, uint16_t y3, uint16_t color);
/// Set current font
/// @param font Font name
void setFont(uint8_t* font, bool monoSp=false ); // default = proportional
/// Get current font
_currentFont getFont();
/// Draw single character (pixel coordinates)
/// @param x point coordinate, x-axis
/// @param y point coordinate, y-axis
/// @param ch ASCII character
/// @param color 16-bit color, default=white
/// @return width of character in display pixels
uint16_t drawChar(uint16_t x, uint16_t y, uint16_t ch, uint16_t color = COLOR_WHITE);
/// width of an ASCII character (pixel )
/// @param ch ASCII character
uint16_t getCharWidth( uint16_t ch ) ;
/// Draw bitmap
/// @param x point coordinate, x-axis
/// @param y point coordinate, y-axis
/// @param bitmap
/// @param w width
/// @param h height
/// @param color 16-bit color, default=white
/// @param bg 16-bit color, background
void drawBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, uint16_t color);
void drawBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, uint16_t color, uint16_t bg);
void drawBitmap(int16_t x, int16_t y, uint8_t *bitmap, int16_t w, int16_t h, uint16_t color);
void drawBitmap(int16_t x, int16_t y, uint8_t *bitmap, int16_t w, int16_t h, uint16_t color, uint16_t bg);
void drawXBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, uint16_t color);
void drawXBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h, uint16_t color, uint16_t bg);
/// Draw bitmap
/// @param x point coordinate, x-axis
/// @param y point coordinate, y-axis
/// @param bitmap, 2D 16bit color bitmap
/// @param w width
/// @param h height
void drawBitmap(uint16_t x, uint16_t y, const uint16_t** bitmap, int16_t w, int16_t h);
void drawBitmap(uint16_t x, uint16_t y, uint16_t** bitmap, int16_t w, int16_t h);
/// Draw bitmap
/// @param x point coordinate, x-axis
/// @param y point coordinate, y-axis
/// @param bitmap, 1D 16bit color bitmap
/// @param w width
/// @param h height
void drawBitmap(uint16_t x, uint16_t y, const uint16_t* bitmap, int16_t w, int16_t h);
void drawBitmap(uint16_t x, uint16_t y, uint16_t* bitmap, int16_t w, int16_t h);
/// Set current GFX font
/// @param f GFX font name defined in include file
void setGFXFont(const GFXfont *f = NULL);
/// Draw a string with the current GFX font
/// @param x point coordinate, x-axis
/// @param y point coordinate, y-axis
/// @param s string to print
/// @param color 16-bit color
void drawGFXText(int16_t x, int16_t y, STRING s, uint16_t color);
/// Get the width & height of a text string with the current GFX font
/// @param str string to analyze
/// @param x point coordinate, x-axis
/// @param y point coordinate, y-axis
/// @param w width in pixels of string
/// @param h height in pixels of string
void getGFXTextExtent(STRING str, int16_t x, int16_t y, int16_t *w, int16_t *h);
/// Draw a single character with the current GFX font
/// @param x point coordinate, x-axis
/// @param y point coordinate, y-axis
/// @param c character to draw
/// @param color 16-bit color
/// @return width of character in display pixels
uint16_t drawGFXChar(int16_t x, int16_t y, unsigned char c, uint16_t color);
uint16_t drawGFXcharBM(int16_t x, int16_t y, unsigned char c, uint16_t color, uint16_t *bm, int bmwd);
void getGFXCharExtent(uint8_t c, int16_t *gw, int16_t *gh, int16_t *xa);
private:
void _spiWrite(uint8_t v);
void _spiWrite16(uint16_t v);
void _spiWriteCommand(uint8_t c);
void _spiWriteData(uint8_t d);
void _swap(uint16_t &a, uint16_t &b);
void _setWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1);
void _setWindow(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, autoIncMode_t mode);
void _resetWindow();
void _drawBitmap(int16_t x, int16_t y, const uint8_t *bitmap, int16_t w, int16_t h,
uint16_t color, uint16_t bg, bool transparent, bool progmem, bool Xbit );
void _orientCoordinates(uint16_t &x1, uint16_t &y1);
void _writeRegister(uint16_t reg, uint16_t data);
void _writeData(uint8_t HI, uint8_t LO);
void _writeData16(uint16_t HILO);
void _writeCommand(uint8_t HI, uint8_t LO);
void _writeCommand16(uint16_t HILO);
uint16_t _maxX, _maxY, _bgColor;
#if defined (__AVR__) || defined(TEENSYDUINO)
int8_t _rst, _rs, _cs, _sdi, _clk, _led;
#ifdef USE_FAST_PINIO
volatile uint8_t *mosiport, *clkport, *dcport, *rsport, *csport;
uint8_t mosipinmask, clkpinmask, cspinmask, dcpinmask;
#endif
#elif defined (__arm__)
int32_t _rst, _rs, _cs, _sdi, _clk, _led;
#ifdef USE_FAST_PINIO
volatile RwReg *mosiport, *clkport, *dcport, *rsport, *csport;
uint32_t mosipinmask, clkpinmask, cspinmask, dcpinmask;
#endif
#elif defined (ESP8266) || defined (ESP32)
int8_t _rst, _rs, _cs, _sdi, _clk, _led;
#ifdef USE_FAST_PINIO
volatile uint32_t *mosiport, *clkport, *dcport, *rsport, *csport;
uint32_t mosipinmask, clkpinmask, cspinmask, dcpinmask;
#endif
#else
int8_t _rst, _rs, _cs, _sdi, _clk, _led;
#endif
uint8_t _orientation, _brightness;
// correspondig modes if orientation changed:
const autoIncMode_t modeTab [3][8] = {
// { R2L_BottomUp, BottomUp_R2L, L2R_BottomUp, BottomUp_L2R, R2L_TopDown, TopDown_R2L, L2R_TopDown, TopDown_L2R }//
/* 90° */ { BottomUp_L2R, L2R_BottomUp, TopDown_L2R, L2R_TopDown, BottomUp_R2L, R2L_BottomUp, TopDown_R2L, R2L_TopDown },
/*180° */ { L2R_TopDown , TopDown_L2R, R2L_TopDown, TopDown_R2L, L2R_BottomUp, BottomUp_L2R, R2L_BottomUp, BottomUp_R2L},
/*270° */ { TopDown_R2L , R2L_TopDown, BottomUp_R2L, R2L_BottomUp, TopDown_L2R, L2R_TopDown, BottomUp_L2R, L2R_BottomUp}
};
bool hwSPI, blState;
_currentFont cfont;
#ifdef ESP32
SPIClass _spi;
#endif
protected:
uint32_t writeFunctionLevel;
void startWrite(void);
void endWrite(void);
GFXfont *gfxFont;
};
#endif
+350
View File
@@ -0,0 +1,350 @@
/* Copyright (C) Hansi Reiser, dl9rdz
*
* partially based on dxlAPRS toolchain
*
* Copyright (C) Christian Rabler <oe5dxl@oevsv.at>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <stdio.h>
#include <WString.h>
#include <stdlib.h>
//#include <arpa/inet.h>
//#include <sys/socket.h>
#include <math.h>
#include <unistd.h>
#include <inttypes.h>
#include "aprs.h"
#if 0
int openudp(const char *ip, int port, struct sockaddr_in *si) {
int fd;
if((fd=socket(AF_INET, SOCK_DGRAM, IPPROTO_UDP))==-1) return -1;
memset((char *)&si, 0, sizeof(si));
si->sin_family = AF_INET;
si->sin_port = htons(port);
if(inet_aton(ip, &(si->sin_addr))==0) {
return -1;
}
return fd;
}
int sendudp(int fd, struct sockaddr_in *si, char *frame, int framelen)
{
if(sendto(fd, frame, framelen, 0, (struct sockaddr *)si, sizeof(struct sockaddr_in))==-1) {
return -1;
}
return 0;
}
#endif
void aprsstr_append(char *b, const char *data)
{
int blen=strlen(b);
int len=strlen(data);
if(blen+len>APRS_MAXLEN) len=APRS_MAXLEN-blen;
strncat(b, data, len);
}
uint32_t realcard(float x) {
if(x<0) return 0;
else return (uint32_t)x;
}
/* CRC for AXUDP frames */
#define APRSCRC_POLY 0x8408
static uint8_t CRCL[256];
static uint8_t CRCH[256];
void aprs_gencrctab(void)
{
uint32_t c;
uint32_t crc;
uint32_t i;
for (c = 0UL; c<=255UL; c++) {
crc = 255UL-c;
for (i = 0UL; i<=7UL; i++) {
if ((crc&1)) crc = (uint32_t)((uint32_t)(crc>>1)^APRSCRC_POLY);
else crc = crc>>1;
} /* end for */
CRCL[c] = (uint8_t)crc;
CRCH[c] = (uint8_t)(255UL-(crc>>8));
} /* end for */
} /* end Gencrctab() */
static void aprsstr_appcrc(char frame[], uint32_t frame_len, int32_t size)
{
uint8_t h;
uint8_t l;
uint8_t b;
int32_t i;
int32_t tmp;
l = 0U;
h = 0U;
tmp = size-1L;
i = 0L;
if (i<=tmp) for (;; i++) {
b = (uint8_t)((uint8_t)(uint8_t)frame[i]^l);
l = CRCL[b]^h;
h = CRCH[b];
if (i==tmp) break;
} /* end for */
frame[size] = (char)l;
frame[size+1L] = (char)h;
} /* end aprsstr_appcrc() */
static int mkaprscall(int32_t * p, char raw[],
uint32_t * i, const char mon[],
char sep1, char sep2, char sep3,
uint32_t sbase)
{
uint32_t s;
uint32_t l;
l = 0UL;
while ((((mon[*i] && mon[*i]!=sep1) && mon[*i]!=sep2) && mon[*i]!=sep3)
&& mon[*i]!='-') {
s = (uint32_t)(uint8_t)mon[*i]*2UL&255UL;
if (s<=64UL) return 0;
raw[*p] = (char)s;
++*p;
++*i;
++l;
if (l>=7UL) return 0;
}
while (l<6UL) {
raw[*p] = '@';
++*p;
++l;
}
s = 0UL;
if (mon[*i]=='-') {
++*i;
while ((uint8_t)mon[*i]>='0' && (uint8_t)mon[*i]<='9') {
s = (s*10UL+(uint32_t)(uint8_t)mon[*i])-48UL;
++*i;
}
if (s>15UL) return 0;
}
raw[*p] = (char)((s+sbase)*2UL);
++*p;
return 1;
} /* end call() */
// returns raw len, 0 in case of error
extern int aprsstr_mon2raw(const char *mon, char raw[], int raw_len)
{
uint32_t r;
uint32_t n;
uint32_t i;
uint32_t tmp;
int p = 7L;
i = 0UL;
fprintf(stderr,"mon2raw for %s\n", mon);
if (!mkaprscall(&p, raw, &i, mon, '>', 0, 0, 48UL)) {
return 0;
}
p = 0L;
if (mon[i]!='>') return 0;
/* ">" */
++i;
if (!mkaprscall(&p, raw, &i, mon, ':', ',', 0, 112UL)) {
return 0;
}
p = 14L;
n = 0UL;
while (mon[i]==',') {
++i;
if (!mkaprscall(&p, raw, &i, mon, ':', ',', '*', 48UL)) {
return 0;
}
++n;
if (n>8UL) {
return 0;
}
if (mon[i]=='*') {
/* "*" has repeatet sign */
++i;
r = (uint32_t)p;
if (r>=21UL) for (tmp = (uint32_t)(r-21UL)/7UL;;) {
raw[r-1UL] = (char)((uint32_t)(uint8_t)raw[r-1UL]+128UL);
/* set "has repeated" flags */
if (!tmp) break;
--tmp;
r -= 7UL;
} /* end for */
}
}
if (p==0L || mon[i]!=':') {
return 0;
}
raw[p-1L] = (char)((uint32_t)(uint8_t)raw[p-1L]+1UL);
/* end address field mark */
raw[p] = '\003';
++p;
raw[p] = '\360';
++p;
++i;
n = 256UL;
while (mon[i]) {
/* copy info part */
if (p>=(int32_t)(raw_len-1)-2L || n==0UL) {
return 0;
}
raw[p] = mon[i];
++p;
++i;
--n;
}
aprsstr_appcrc(raw, raw_len, p);
fprintf(stderr,"results in %s\n",raw);
return p+2;
} /* end mon2raw() */
extern int aprsstr_mon2kiss(const char *mon, char raw[], int raw_len)
{
char tmp[201];
int len = aprsstr_mon2raw(mon, tmp, 201);
if(len==0) return 0;
int idx=0;
raw[idx++] = '\xC0';
for(int i=0; i<len-2; i++) { // -2: discard CRC, not used in KISS
if(tmp[i]=='\xC0') {
raw[idx++] = '\xDB';
raw[idx++] = '\xDC';
} else if (tmp[i]=='\xDB') {
raw[idx++] = '\xDB';
raw[idx++] = '\xDD';
} else {
raw[idx++] = tmp[i];
}
if(idx>=raw_len)
return 0;
}
return idx;
}
#define FEET (1.0/0.3048)
#define KNOTS (1.851984)
#define X2C_max_longcard 0xFFFFFFFFUL
static uint32_t X2C_TRUNCC(double x, uint32_t min0, uint32_t max0)
{
uint32_t i;
if (x < (double)min0)
i = (uint32_t)min0;
if (x > (double)max0)
i = (uint32_t)max0;
i = (uint32_t)x;
if ((double)i > x)
--i;
return i;
}
static uint32_t truncc(double r)
{
if (r<=0.0) return 0UL;
else if (r>=2.E+9) return 2000000000UL;
else return (uint32_t)X2C_TRUNCC(r,0UL,X2C_max_longcard);
return 0;
} /* end truncc() */
static uint32_t dao91(double x)
/* radix91(xx/1.1) of dddmm.mmxx */
{
double a;
a = fabs(x);
return ((truncc((a-(double)(float)truncc(a))*6.E+5)%100UL)
*20UL+11UL)/22UL;
} /* end dao91() */
char b[201];
char raw[201];
char *aprs_senddata(SondeInfo *s, const char *usercall, const char *sym) {
// float lat, float lon, float alt, float speed, float dir, float climb, const char *type, const char *objname, const char *usercall, const char *sym, const char *comm)
*b=0;
aprsstr_append(b, usercall);
aprsstr_append(b, ">");
const char *destcall="APZRDZ";
aprsstr_append(b, destcall);
// uncompressed
aprsstr_append(b, ":;");
char tmp[10];
snprintf(tmp,10,"%s ",s->id);
aprsstr_append(b, tmp);
aprsstr_append(b, "*");
// time
int i = strlen(b);
int sec = s->time % 86400;
snprintf(b+i, APRS_MAXLEN-1, "%02d%02d%02dz", sec/(60*60), (sec%(60*60))/60, sec%60);
i = strlen(b);
//aprsstr_append_data(time, ds);
int lati = abs((int)s->lat);
int latm = (fabs(s->lat)-lati)*6000;
snprintf(b+i, APRS_MAXLEN-i, "%02d%02d.%02d%c%c", lati, latm/100, latm%100, s->lat<0?'S':'N', sym[0]);
i = strlen(b);
int loni = abs((int)s->lon);
int lonm = (fabs(s->lon)-loni)*6000;
snprintf(b+i, APRS_MAXLEN-i, "%03d%02d.%02d%c%c", loni, lonm/100, lonm%100, s->lon<0?'W':'E', sym[1]);
if(s->hs>0.5) {
i=strlen(b);
snprintf(b+i, APRS_MAXLEN-i, "%03d/%03d", realcard(s->dir+1.5), realcard(s->hs*1.0/KNOTS+0.5));
}
if(s->alt>0.5) {
i=strlen(b);
snprintf(b+i, APRS_MAXLEN-i, "/A=%06d", realcard(s->alt*FEET+0.5));
}
int dao=1;
if(dao) {
i=strlen(b);
snprintf(b+i, APRS_MAXLEN-i, "!w%c%c!", 33+dao91(s->lat), 33+dao91(s->lon));
}
strcat(b, "&");
char comm[100];
snprintf(comm, 100, "Clb=%.1fm/s %.3fMHz Type=%s", s->vs, s->freq, sondeTypeStr[s->type]);
strcat(b, comm);
if(s->type==STYPE_M10||s->type==STYPE_DFM06||s->type==STYPE_DFM09) {
snprintf(comm, 100, " ser=%s", s->ser);
strcat(b, comm);
}
return b;
}
#if 0
int main(int argc, char *argv[])
{
Gencrctab();
struct sockaddr_in si;
int fd = openudp("127.0.0.1",9002,&si);
if(fd<0) { fprintf(stderr,"open failed\n"); return 1; }
float lat=48, lon=10;
while(1) {
const char *str = aprs_senddata(lat, lon, 543, 5, 180, 1.5, "RS41", "TE0ST", "TE1ST", "EO");
int rawlen = aprsstr_mon2raw(str, raw, APRS_MAXLEN);
sendudp(fd, raw, rawlen);
str = "OE3XKC>APMI06,qAR,OE3XLR:;ER-341109*111111z4803.61NE01532.39E0145.650MHz R15k OE3XPA";
rawlen = aprsstr_mon2raw(str, raw, APRS_MAXLEN);
sendudp(fd, &si, raw, rawlen);
lat += 0.002; lon += 0.01;
sleep(5);
}
}
#endif
+14
View File
@@ -0,0 +1,14 @@
#ifndef _aprs_h
#define _aprs_h
#include "Sonde.h"
#define APRS_MAXLEN 201
void aprs_gencrctab(void);
int aprsstr_mon2raw(const char *mon, char raw[], int raw_len);
int aprsstr_mon2kiss(const char *mon, char raw[], int raw_len);
char *aprs_senddata(SondeInfo *s, const char *usercall, const char *sym);
#endif
+68
View File
@@ -0,0 +1,68 @@
Heltec board v1 => fingerprint 0000100 => 4
(sda,scl: 4,15) (same as LORA v1.0)
0:1 1:0 2:0 3:1 4:0 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:0 13:0 14:1 15:0 16:0 17:0 18:0 19:0 20:0 21:1 22:0 23:0 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0
Heltec board v2
(sda,scl: 4,15) (similar to v1.0, but GPIO21 switches 3V3) => fingerprint 4
0:1 1:0 2:0 3:1 4:0 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:0 13:0 14:1 15:0 16:0 17:0 18:0 19:0 20:0 21:1 22:0 23:0 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0
0:1 1:1 2:0 3:1 4:0 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:0 13:0 14:1 15:0 16:0 17:0 18:0 19:0 20:0 21:1 22:0 23:0 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0 (before setup
TTGO LORA32 v2.1_1.6 (button1: touch gpio 2 => 130; button2: touch gpio14 => 142) fingerprint 0011111 => 31
(sda,scl: 21,22)
0:1 1:0 2:0 3:1 4:0 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:0 13:0 14:1 15:1 16:1 17:1 18:0 19:0 20:0 21:1 22:1 23:1 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0
0:4 1:4 2:0 3:4 4:0 5:4 6:0 7:4 8:0 9:4 10:4 11:4 12:0 13:0 14:4 15:4 16:4 17:4 18:0 19:0 20:0 21:4 22:4 23:4 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0 (in Sonde())
TTGO LORA v1.0 => fingerprint 1000000 => 64
(sda,scl: 4,15) (button1: 0) (button2: touch gpio13 = 141)
0:1 1:0 2:0 3:1 4:1 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:0 13:0 14:1 15:1 16:0 17:0 18:0 19:0 20:0 21:0 22:0 23:0 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0
0:4 1:4 2:0 3:4 4:4 5:4 6:0 7:4 8:0 9:4 10:4 11:4 12:0 13:0 14:4 15:4 16:0 17:0 18:0 19:0 20:0 21:0 22:0 23:0 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0 (in Sonde())
TTGO T-Beam => fingerprint 0110111 => 55
(sda,scl: 21,22) (button1: 39) (button2: touch gpio13 = 141) (gps rx: 12)
0:1 1:0 2:0 3:1 4:0 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:1 13:0 14:1 15:1 16:1 17:0 18:0 19:0 20:0 21:1 22:1 23:1 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0
0:4 1:4 2:0 3:4 4:0 5:4 6:0 7:4 8:0 9:4 10:4 11:4 12:4 13:0 14:4 15:4 16:4 17:0 18:0 19:0 20:0 21:4 22:4 23:4 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0 (before setup)
TTGO T-Beam with extern 2" ILI9225 Display => fingerprint 0110000 => 48
0:1 1:0 2:0 3:1 4:0 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:1 13:0 14:1 15:1 16:1 17:0 18:0 19:0 20:0 21:0 22:0 23:1 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0
0:4 1:4 2:0 3:4 4:0 5:4 6:0 7:4 8:0 9:4 10:4 11:4 12:4 13:0 14:4 15:4 16:4 17:0 18:0 19:0 20:0 21:0 22:0 23:4 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0 (before setup)
TTGO T-Beam 1.0 with OLED display => fingerprint 0010111 => 23
0:1 1:0 2:0 3:1 4:0 5:1 6:0 7:1 8:0 9:1 10:1 11:1 12:0 13:0 14:1 15:1 16:1 17:0 18:0 19:0 20:0 21:1 22:1 23:1 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0
0:4 1:4 2:0 3:4 4:0 5:4 6:0 7:4 8:0 9:4 10:4 11:4 12:0 13:0 14:4 15:4 16:4 17:0 18:0 19:0 20:0 21:4 22:4 23:4 24:0 25:0 26:0 27:0 28:0 29:0 30:0 31:0 32:0 33:0 34:0 35:0 36:0 37:0 38:0 (before setup)
1
Fingerprint GPIOs: 4, 12, 16, 17, 21, 22, 23,
Current autodetect strategy:
RST always set to 16
GPIO16=0 (GPio22,23 would also work):
==Heltec or TTGO LORA v1.0==
SDA,SCL set to (4,15)
Button 1 set to GPIO 0
Button 2 set to Touch in GPIO 13 (141)
otherwise
==LORA32 v2.1 or T-Beam==
GPIO17=0:
== T-BEAM =
GPIO12==0: v1 (or check PMU via I2C?)
GPS RX set to 34
Button 1 set to GPIO28
BUtton 2 set to Touch GPIO13
else:
GPS RX set to 12
Button 1 set to GPIO39
Button 2 set to Touch GPIO13 (141)
GPIO21=0:
large display connected (use ILI9225 contig: SDA4 CLK21 RS2 RST22 CS0)
else:
small display connected, set SDA,SCL to (21,22)
otherweise:
SDA,SCL set to (21,22)
GPS disabled
Button 1 set to Touch GPIO2 (130)
Button 2 set to Touch GPIO14 (142)
+124
View File
@@ -0,0 +1,124 @@
#include "FS.h"
#include <SPIFFS.h>
#include <WiFi.h>
//Write data web
//Fonction
void writedataweb(){
String updateHost = "xavier.debert.free.fr";
String updateDataWeb = "/RS/dataweb/index.html.txt";
String *updateData = &updateDataWeb;
String dispHost = updateHost.substring(0, 14);
//disp.rdis->drawString(2, 0, dispHost.c_str());
Serial.println("Connecting to: " + updateHost);
// Connect to Update host
if (client.connect(updateHost.c_str(), updatePort)) {
// Connection succeeded, fecthing the bin
Serial.println("Fetching index.html: " + String(*updateData));
// Get the contents of the bin file
client.print(String("GET ") + *updateData + " HTTP/1.1\r\n" +
"Host: " + updateHost + "\r\n" +
"Cache-Control: no-cache\r\n" +
"Connection: close\r\n\r\n");
// Check what is being sent
// Serial.print(String("GET ") + bin + " HTTP/1.1\r\n" +
// "Host: " + host + "\r\n" +
// "Cache-Control: no-cache\r\n" +
// "Connection: close\r\n\r\n");
unsigned long timeout = millis();
while (client.available() == 0) {
if (millis() - timeout > 5000) {
Serial.println("Client Timeout !");
client.stop();
return;
}
}
// Once the response is available,
// check stuff
/*
Response Structure
HTTP/1.1 200 OK
x-amz-id-2: NVKxnU1aIQMmpGKhSwpCBh8y2JPbak18QLIfE+OiUDOos+7UftZKjtCFqrwsGOZRN5Zee0jpTd0=
x-amz-request-id: 2D56B47560B764EC
Date: Wed, 14 Jun 2017 03:33:59 GMT
Last-Modified: Fri, 02 Jun 2017 14:50:11 GMT
ETag: "d2afebbaaebc38cd669ce36727152af9"
Accept-Ranges: bytes
Content-Type: application/octet-stream
Content-Length: 357280
Server: AmazonS3
{{BIN FILE CONTENTS}}
*/
while (client.available()) {
// read line till /n
String line = client.readStringUntil('\n');
// remove space, to check if the line is end of headers
line.trim();
// if the the line is empty,
// this is end of headers
// break the while and feed the
// remaining `client` to the
// Update.writeStream();
if (!line.length()) {
//headers ended
break; // and get the OTA started
}
// Check if the HTTP Response is 200
// else break and Exit Update
if (line.startsWith("HTTP/1.1")) {
if (line.indexOf("200") < 0) {
Serial.println("Got a non 200 status code from server. error.");
break;
}
}
// extract headers here
// Start with content length
if (line.startsWith("Content-Length: ")) {
contentLength = atoi((getHeaderValue(line, "Content-Length: ")).c_str());
Serial.println("Got " + String(contentLength) + " bytes from server");
}
// Next, the content type
if (line.startsWith("Content-Type: ")) {
String contentType = getHeaderValue(line, "Content-Type: ");
Serial.println("Got " + contentType + " payload.");
if (contentType == "application/text") {
isValidContentType = true;
}
}
}
} else {
// Connect to updateHost failed
// May be try?
// Probably a choppy network?
Serial.println("Connection to " + String(updateHost) + " failed. Please check your setup");
// retry??
// execOTA();
}
/*
Serial.printf("\nDataWeb On\n");
//open file for appending new blank line to EOF.
File f = SPIFFS.open("/data.html", "w");
f.println("<html><body>TEST de DATAWeb1</body></html>");
f.close();
*/
}
+226
View File
@@ -0,0 +1,226 @@
#include "time.h"
#include "geteph.h"
#include <SPIFFS.h>
#include <WiFi.h>
#include <rom/miniz.h>
#include <inttypes.h>
#include <WiFi.h>
#include "Display.h"
extern WiFiClient client;
static const char *ftpserver = "www.ngs.noaa.gov";
char outbuf[128];
uint8_t getreply() {
String s = client.readStringUntil('\n');
Serial.println(s);
const char *str = s.c_str();
if(strlen(str)<4) return 255; // something unusual...
if(str[3]=='-') { // multi-line resonse...
String s2;
const char *str2;
do {
s2 = client.readStringUntil('\n');
Serial.println(s2);
str2 = s2.c_str();
if(strlen(str2)<4) return 255; // something is wrong
} while( str[0]!=str2[0] || str[1]!=str2[1] || str[2]!=str2[2] || str2[3]!=' ' );
}
return str[0];
}
void writeFully(File &file, uint8_t *buf, size_t len)
{
size_t olen;
while(len) {
olen = file.write(buf, len);
Serial.printf("written: %d of %d\n", olen, len);
len -= olen;
buf += olen;
}
}
void geteph() {
// Set current time via network...
struct tm tinfo;
configTime(0, 0, "pool.ntp.org");
bool ok = getLocalTime(&tinfo, 2000); // wait max 2 seconds to get current time via ntp
if(!ok) {
Serial.println("Failed to get current date/time");
return;
}
// Check time of last update
int year = tinfo.tm_year + 1900;
int day = tinfo.tm_yday + 1;
Serial.printf("year %d, day %d\n", year, day);
char nowstr[20];
snprintf(nowstr, 20, "%04d%03d%02d", year, day, tinfo.tm_hour);
File status = SPIFFS.open("/brdc.time", "r");
if(status) {
String ts = status.readStringUntil('\n');
const char *tsstr = ts.c_str();
if(tsstr && strlen(tsstr)>=9) {
if(strcmp(nowstr, ts.c_str())<=0) {
Serial.println("local brdc is up to date\n");
return;
}
}
Serial.printf("now: %s, existing: %s => updating\n", nowstr, tsstr);
}
status.close();
disp.rdis->clear();
disp.rdis->setFont(FONT_SMALL);
disp.rdis->drawString(0, 0, "FTP ngs.noaa.gov");
// fetch rinex from server
File fh = SPIFFS.open("/brdc.gz","w");
if(!fh) {
Serial.println("cannot open file\n");
return;
}
char buf[252];
snprintf(buf, 128, "/cors/rinex/%04d/%03d/brdc%03d0.%02dn.gz", year, day, day, year-2000);
Serial.println("running geteph\n");
disp.rdis->drawString(0, 1, buf+21);
if(!client.connect(ftpserver, 21)) {
Serial.println("FTP connection to www.ngs.noaa.gov failed");
return;
}
#if 0
while(!client.available()) delay(1);
while(client.available()) {
String s = client.readStringUntil('\n');
Serial.println(s);
}
#endif
if(getreply()>='4') { Serial.println("connected failed"); return; }
client.print("USER anonymous\r\n");
if(getreply()>='4') { Serial.println("USER failed"); return; }
client.print("PASS anonymous\r\n");
if(getreply()>='4') { Serial.println("PASS failed"); return; }
client.print("TYPE I\r\n");
if(getreply()>='4') { Serial.println("TYPE I failed"); return; }
client.print("PASV\r\n");
String s = client.readStringUntil('\n');
Serial.println(s);
if(s.c_str()[0]>='4') { Serial.println("PASV failed"); return; }
int array_pasv[6];
char *tStr = strtok((char *)s.c_str(), "(,");
for(int i=0; i<6; i++) {
tStr = strtok(NULL, "(,");
if(tStr==NULL) {
Serial.println("strange response to PASV");
return;
}
array_pasv[i] = atoi(tStr);
Serial.println(array_pasv[i]);
}
uint16_t port = (array_pasv[4]<<8) | (array_pasv[5]&0xff);
WiFiClient dclient;
Serial.printf("connecting to %s:%d\n", ftpserver,port);
dclient.connect(ftpserver, port);
if(!dclient) {
Serial.println("data connection failed");
return;
}
client.print("RETR ");
Serial.printf("fetching %s with FTP...\n", buf);
client.println(buf);
s = client.readStringUntil('\n');
Serial.println(s);
if(s.c_str()[0]>='4') { Serial.println("RETR failed"); return; }
int len=0;
while(dclient.connected()) {
while(dclient.available()) {
char c = dclient.read();
fh.write(c);
len++;
}
}
Serial.printf("fetched %d bytes\n", len);
fh.close();
snprintf(buf, 16, "Fetched %d B ",len);
buf[16]=0;
disp.rdis->drawString(0,2,buf);
disp.rdis->drawString(0,4,"Decompressing...");
// decompression
tinfl_decompressor *decomp = (tinfl_decompressor *)malloc(sizeof(tinfl_decompressor));
tinfl_init(decomp);
File file = SPIFFS.open("/brdc.gz","r");
if(!file) {
Serial.println("cannot open file\n");
return;
}
File ofile = SPIFFS.open("/brdc", "w");
if(!ofile) {
Serial.println("cannot open file /brdc for writing");
return;
}
file.readBytes(buf, 10); // skip gzip header
char flags = buf[3];
if(flags&0x07) {
Serial.println("Unsupported flags in gzip header, may or may not cause a problem");
}
if(flags&0x08) { // skip file name extra header
do {
int res=file.readBytes(buf, 1);
if(res!=1) return;
} while(*buf);
}
if(flags&0x10) { // skip file name extra header
do {
int res=file.readBytes(buf, 1);
if(res!=1) return;
} while(*buf);
}
int opos = 0;
int total = 0;
Serial.println("Decompressing ephemeris data...\n");
char *obuf =(char *)malloc(32768);
char *ibuf =(char *)malloc(8192);
while(file.available()) {
size_t len = file.readBytes(ibuf, 8192);
size_t inofs = 0;
size_t inlen = len;
while(inofs<len) {
size_t outlen=32768-opos;
int res = tinfl_decompress(decomp, (const mz_uint8 *)ibuf+inofs, &inlen, (uint8_t *)obuf, (mz_uint8 *)obuf+opos, &outlen, TINFL_FLAG_HAS_MORE_INPUT);
if(res<0) break;
if(outlen==0) break;
Serial.printf("... (res=%d) decompressed %d into %d bytes\n", res, inlen, outlen);
inofs += inlen;
inlen = len - inofs;
//size_t retv = ofile.write((uint8_t *)(obuf+opos), outlen);
//Serial.printf("write %d bytes\n", retv);
writeFully(ofile, (uint8_t *)(obuf+opos), outlen);
//Serial.write((uint8_t *)(obuf+opos), outlen);
total += outlen;
opos += outlen;
if(res==0) break; // done indication
if(opos>=32768) {
Serial.printf("... decompressed %d bytes\n", total);
opos=0;
}
}
}
// maybe todo: check crc?!?
Serial.printf("done extracing content (total length: %d)\n", total);
status = SPIFFS.open("/brdc.time","w");
status.println(nowstr);
status.close();
snprintf(buf, 16, "Done: %d B ",total);
buf[16]=0;
disp.rdis->drawString(0,5,buf);
delay(1000);
free(obuf);
free(ibuf);
free(decomp);
file.close();
ofile.close();
}
+3
View File
@@ -0,0 +1,3 @@
void geteph();
+26
View File
@@ -0,0 +1,26 @@
// SPDX-License-Identifier: GPL-3.0
// original source: https://github.com/Nkawu/TFT_22_ILI9225
// Font structures like Adafruit_GFX (1.1 and later).
// Example fonts are included in 'fonts' directory.
// To use a font in your Arduino sketch, #include the corresponding .h
// file and pass address of GFXfont struct to setFont().
#ifndef _GFFFONT_H_
#define _GFFFONT_H_
typedef struct { // Data stored PER GLYPH
uint16_t bitmapOffset; // Pointer into GFXfont->bitmap
uint8_t width, height; // Bitmap dimensions in pixels
uint8_t xAdvance; // Distance to advance cursor (x axis)
int8_t xOffset, yOffset; // Dist from cursor pos to UL corner
} GFXglyph;
typedef struct { // Data stored for FONT AS A WHOLE:
uint8_t *bitmap; // Glyph bitmaps, concatenated
GFXglyph *glyph; // Glyph array
uint8_t first, last; // ASCII extents
uint8_t yAdvance; // Newline distance (y axis)
} GFXfont;
#endif // _GFFFONT_H_
+1866
View File
File diff suppressed because it is too large Load Diff
+148
View File
@@ -0,0 +1,148 @@
typedef struct {
uint16_t prn;
uint16_t week;
uint32_t toa;
char epoch[20];
double toe;
double toc;
double e;
double delta_n;
double delta_i;
double i0;
double OmegaDot;
double sqrta;
double Omega0;
double w;
double M0;
double tgd;
double idot;
double cuc;
double cus;
double crc;
double crs;
double cic;
double cis;
double af0;
double af1;
double af2;
int gpsweek;
uint16_t svn;
uint8_t ura;
uint8_t health;
uint8_t conf;
} EPHEM_t;
typedef struct {
uint32_t t;
double pseudorange;
double pseudorate;
double clock_corr;
double clock_drift;
double X;
double Y;
double Z;
double vX;
double vY;
double vZ;
int ephhr;
double PR;
double ephtime;
int prn;
} SAT_t;
typedef struct {double X; double Y; double Z;} LOC_t;
typedef struct {double X; double Y; double Z;
double vX; double vY; double vZ;} VEL_t;
double dist(double X1, double Y1, double Z1, double X2, double Y2, double Z2);
void GPS_SatelliteClockCorrection(
const unsigned short transmission_gpsweek, // GPS week when signal was transmit (0-1024+) [weeks]
const double transmission_gpstow, // GPS time of week when signal was transmit [s]
const unsigned short ephem_week, // ephemeris: GPS week (0-1024+) [weeks]
const double toe, // ephemeris: time of week [s]
const double toc, // ephemeris: clock reference time of week [s]
const double af0, // ephemeris: polynomial clock correction coefficient [s],
const double af1, // ephemeris: polynomial clock correction coefficient [s/s],
const double af2, // ephemeris: polynomial clock correction coefficient [s/s^2]
const double ecc, // ephemeris: eccentricity of satellite orbit []
const double sqrta, // ephemeris: square root of the semi-major axis of orbit [m^(1/2)]
const double delta_n, // ephemeris: mean motion difference from computed value [rad]
const double m0, // ephemeris: mean anomaly at reference time [rad]
const double tgd, // ephemeris: group delay differential between L1 and L2 [s]
double* clock_correction );
void GPS_SatellitePosition_Ephem(
const unsigned short gpsweek, // gps week of signal transmission (0-1024+) [week]
const double gpstow, // time of week of signal transmission (gpstow-psr/c) [s]
EPHEM_t ephem,
double* clock_correction, // clock correction for this satellite for this epoch [m]
double* satX, // satellite X position WGS84 ECEF [m]
double* satY, // satellite Y position WGS84 ECEF [m]
double* satZ // satellite Z position WGS84 ECEF [m]
);
void GPS_SatelliteClockDriftCorrection(
const unsigned short transmission_gpsweek, // GPS week when signal was transmit (0-1024+) [weeks]
const double transmission_gpstow, // GPS time of week when signal was transmit [s]
const unsigned short ephem_week, // ephemeris: GPS week (0-1024+) [weeks]
const double toe, // ephemeris: time of week [s]
const double toc, // ephemeris: clock reference time of week [s]
const double af0, // ephemeris: polynomial clock correction coefficient [s],
const double af1, // ephemeris: polynomial clock correction coefficient [s/s],
const double af2, // ephemeris: polynomial clock correction coefficient [s/s^2]
const double ecc, // ephemeris: eccentricity of satellite orbit []
const double sqrta, // ephemeris: square root of the semi-major axis of orbit [m^(1/2)]
const double delta_n, // ephemeris: mean motion difference from computed value [rad]
const double m0, // ephemeris: mean anomaly at reference time [rad]
const double tgd, // ephemeris: group delay differential between L1 and L2 [s]
double* clock_correction, // ephemeris: satellite clock correction [m]
double* clock_drift ) ;
void GPS_SatellitePositionVelocity_Ephem(
const unsigned short gpsweek, // gps week of signal transmission (0-1024+) [week]
const double gpstow, // time of week of signal transmission (gpstow-psr/c) [s]
EPHEM_t ephem,
double* clock_correction, // clock correction for this satellite for this epoch [m]
double* clock_drift, // clock correction for this satellite for this epoch [m]
double* satX, // satellite X position WGS84 ECEF [m]
double* satY, // satellite Y position WGS84 ECEF [m]
double* satZ, // satellite Z position WGS84 ECEF [m]
double* satvX, // satellite X velocity WGS84 ECEF [m]
double* satvY, // satellite Y velocity WGS84 ECEF [m]
double* satvZ // satellite Z velocity WGS84 ECEF [m]
);
int NAV_ClosedFormSolution_FromPseudorange(
SAT_t sats[4], // input: satellite position and pseudorange
double* latitude, // output: ellipsoid latitude [rad]
double* longitude, // ellipsoid longitude [rad]
double* height, // ellipsoid height [m]
double* rx_clock_bias, // receiver clock bias [m]
double pos_ecef[3] );
int calc_DOPn(int n, SAT_t satss[], double pos_ecef[3], double DOP[4]);
int NAV_LinP(int N, SAT_t satv[], double pos_ecef[3], double dt,
double dpos_ecef[3], double *cc);
void ecef2elli(double X, double Y, double Z, double *lat, double *lon, double *alt);
int NAV_LinP(int N, SAT_t satv[], double pos_ecef[3], double dt,
double dpos_ecef[3], double *cc);
int NAV_LinV(int N, SAT_t satv[], double pos_ecef[3],
double vel_ecef[3], double dt,
double dvel_ecef[3], double *cc);
int NAV_bancroft1(int N, SAT_t sats[], double pos_ecef[3], double *cc);
EPHEM_t *read_RNXpephs(const char *file);
+1735
View File
File diff suppressed because it is too large Load Diff
+22
View File
@@ -0,0 +1,22 @@
typedef struct {
int frnr;
char id[11];
int week; int gpssec;
int jahr; int monat; int tag;
int wday;
int std; int min; float sek;
double lat; double lon; double alt;
double vH; double vD; double vU;
int k;
int sats[4];
double dop;
int freq;
unsigned short aux[4];
double diter;
} gpx_t;
extern gpx_t gpx;
void print_frame(uint8_t *data, int len);
void get_eph(const char *file);
+32
View File
@@ -0,0 +1,32 @@
/*
* dxlAPRS toolchain
*
* Copyright (C) Christian Rabler <oe5dxl@oevsv.at>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef inttypes_h
#include <inttypes.h>
#endif
#define N 255
#define R 24
#define K (N-R)
void *init_rs_char(int symsize,int gfpoly,int fcr,int prim,int nroots,int pad);
int decode_rs_char(void *arg,
unsigned char *data, int *eras_pos, int no_eras);
void *rs;
void initrsc()
{
rs = init_rs_char( 8, 0x11d, 0, 1, R, 0);
}
int decodersc(char *data, uint32_t *eras_pos, uint32_t no_eras)
{
return decode_rs_char(rs, (unsigned char *)data, (int *)eras_pos, no_eras);
}
+17
View File
@@ -0,0 +1,17 @@
/*
* dxlAPRS toolchain
*
* Copyright (C) Christian Rabler <oe5dxl@oevsv.at>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef rsc_H_
#define rsc_H_
long decodersc(char [], uint32_t [], uint32_t);
void initrsc(void);
#endif /* rsc_H_ */
+436
View File
@@ -0,0 +1,436 @@
/*
* Copyright 2016 Hannes Schmelzer, OE5HPM
* doing several cleanups and architecture changes, no functional change yet
*
* General purpose Reed-Solomon decoder for 8-bit symbols or less
* Copyright 2003 Phil Karn, KA9Q
* May be used under the terms of the GNU Lesser General Public License (LGPL)
*
* The guts of the Reed-Solomon decoder, meant to be #included
* into a function body with the following typedefs, macros and variables supplied
* according to the code parameters:
* data_t - a typedef for the data symbol
* data_t data[] - array of rs->nn data and parity symbols to be corrected in place
* retval - an integer lvalue into which the decoder's return code is written
* NROOTS - the number of roots in the RS code generator polynomial,
* which is the same as the number of parity symbols in a block.
Integer variable or literal.
* rs->nn - the total number of symbols in a RS block. Integer variable or literal.
* rs->pad - the number of pad symbols in a block. Integer variable or literal.
* rs->alpha_to - The address of an array of rs->nn elements to convert Galois field
* elements in index (log) form to polynomial form. Read only.
* rs->index_of - The address of an array of rs->nn elements to convert Galois field
* elements in polynomial form to index (log) form. Read only.
* MODNN - a function to reduce its argument modulo rs->nn. May be inline or a macro.
* rs->fcr - An integer literal or variable specifying the first consecutive root of the
* Reed-Solomon generator polynomial. Integer variable or literal.
* rs->prim - The primitive root of the generator poly. Integer variable or literal.
* DEBUG - If set to 1 or more, do various internal consistency checking. Leave this
* undefined for production code
* The memset(), memmove(), and memcpy() functions are used. The appropriate header
* file declaring these functions (usually <string.h>) must be included by the calling
* program.
*/
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
struct rs {
unsigned int magic; /* struct magic */
int mm; /* Bits per symbol */
int nn; /* Symbols per block (= (1<<mm)-1) */
unsigned char *alpha_to; /* log lookup table */
unsigned char *index_of; /* Antilog lookup table */
unsigned char *genpoly; /* Generator polynomial */
int nroots; /*
* Number of generator
* roots = number of parity symbols
*/
int fcr; /* First consecutive root, index form */
int prim; /* Primitive element, index form */
int iprim; /* prim-th root of 1, index form */
int pad; /* Padding bytes in shortened block */
};
static inline int modnn(struct rs *rs,int x)
{
while (x >= rs->nn) {
x -= rs->nn;
x = (x >> rs->mm) + (x & rs->nn);
}
return x;
}
#define MODNN(x) modnn(rs, x)
#define MIN(a,b) ((a) < (b) ? (a) : (b))
#define MAGIC 0xABCD6722
void free_rs_char(void *arg)
{
struct rs *rs = (struct rs *)arg;
if (rs == NULL)
return;
if (rs->magic != MAGIC)
return;
if (rs->alpha_to != NULL)
free(rs->alpha_to);
if (rs->index_of != NULL)
free(rs->index_of);
if (rs->genpoly != NULL)
free(rs->genpoly);
free(rs);
}
/* Initialize a Reed-Solomon codec
* symsize = symbol size, bits
* gfpoly = Field generator polynomial coefficients
* fcr = first root of RS code generator polynomial, index form
* prim = primitive element to generate polynomial roots
* nroots = RS code generator polynomial degree (number of roots)
* pad = padding bytes at front of shortened block
*/
void *init_rs_char(int symsize, int gfpoly, int fcr, int prim,
int nroots, int pad)
{
struct rs *rs;
int i, j, sr,root,iprim;
/* Check parameter ranges */
if (symsize < 0 || symsize > 8*sizeof(unsigned char))
return NULL;
if (fcr < 0 || fcr >= (1<<symsize))
return NULL;
if (prim <= 0 || prim >= (1<<symsize))
return NULL;
if (nroots < 0 || nroots >= (1<<symsize))
return NULL;
if (pad < 0 || pad >= ((1<<symsize) -1 - nroots))
return NULL;
rs = (struct rs*)malloc(sizeof(*rs));
if (rs == NULL) {
printf("%s: cannot allocate memory!\n", __func__);
return NULL;
}
memset(rs, 0, sizeof(*rs));
rs->magic = MAGIC;
rs->mm = symsize;
rs->nn = (1<<symsize)-1;
rs->pad = pad;
rs->alpha_to = (unsigned char *)malloc(sizeof(unsigned char)*(rs->nn+1));
if (rs->alpha_to == NULL) {
free(rs);
return NULL;
}
rs->index_of = (unsigned char *)malloc(sizeof(unsigned char)*(rs->nn+1));
if (rs->index_of == NULL) {
free(rs->alpha_to);
free(rs);
return NULL;
}
/* Generate Galois field lookup tables */
rs->index_of[0] = rs->nn; /* log(zero) = -inf */
rs->alpha_to[rs->nn] = 0; /* alpha**-inf = 0 */
sr = 1;
for (i = 0; i < rs->nn; i++) {
rs->index_of[sr] = i;
rs->alpha_to[i] = sr;
sr <<= 1;
if (sr & (1<<symsize))
sr ^= gfpoly;
sr &= rs->nn;
}
if (sr != 1) {
/* field generator polynomial is not primitive! */
free(rs->alpha_to);
free(rs->index_of);
free(rs);
return NULL;
}
/* Form RS code generator polynomial from its roots */
rs->genpoly = (unsigned char *)malloc(sizeof(unsigned char)*(nroots+1));
if(rs->genpoly == NULL) {
free(rs->alpha_to);
free(rs->index_of);
free(rs);
return NULL;
}
rs->fcr = fcr;
rs->prim = prim;
rs->nroots = nroots;
/* Find prim-th root of 1, used in decoding */
for (iprim = 1; (iprim % prim) != 0; iprim += rs->nn)
;
rs->iprim = iprim / prim;
rs->genpoly[0] = 1;
for (i = 0, root = fcr*prim; i < nroots; i++, root += prim) {
rs->genpoly[i+1] = 1;
/* Multiply rs->genpoly[] by @**(root + x) */
for (j = i; j > 0; j--) {
if (rs->genpoly[j] != 0)
rs->genpoly[j] = rs->genpoly[j-1] ^ rs->alpha_to[modnn(rs,rs->index_of[rs->genpoly[j]] + root)];
else
rs->genpoly[j] = rs->genpoly[j-1];
}
/* rs->genpoly[0] can never be zero */
rs->genpoly[0] = rs->alpha_to[modnn(rs,rs->index_of[rs->genpoly[0]] + root)];
}
/* convert rs->genpoly[] to index form for quicker encoding */
for (i = 0; i <= nroots; i++)
rs->genpoly[i] = rs->index_of[rs->genpoly[i]];
return rs;
}
int decode_rs_char(void *arg,
unsigned char *data, int *eras_pos, int no_eras)
{
struct rs *rs = (struct rs *)arg;
if (rs == NULL)
return -1;
if (rs->magic != MAGIC)
return -1;
int retval;
int deg_lambda, el, deg_omega;
int i, j, r,k;
unsigned char u,q,tmp,num1,num2,den,discr_r;
unsigned char lambda[rs->nroots+1], s[rs->nroots]; /* Err+Eras Locator poly
* and syndrome poly */
unsigned char b[rs->nroots+1], t[rs->nroots+1], omega[rs->nroots+1];
unsigned char root[rs->nroots], reg[rs->nroots+1], loc[rs->nroots];
int syn_error, count;
/* form the syndromes; i.e., evaluate data(x) at roots of g(x) */
for (i = 0; i < rs->nroots; i++)
s[i] = data[0];
for (j = 1; j < rs->nn-rs->pad; j++) {
for(i=0;i<rs->nroots;i++) {
if(s[i] == 0) {
s[i] = data[j];
} else {
s[i] = data[j] ^ rs->alpha_to[MODNN(rs->index_of[s[i]] + (rs->fcr+i)*rs->prim)];
}
}
}
/* Convert syndromes to index form, checking for nonzero condition */
syn_error = 0;
for (i = 0; i < rs->nroots; i++) {
syn_error |= s[i];
s[i] = rs->index_of[s[i]];
}
if (!syn_error) {
/* if syndrome is zero, data[] is a codeword and there are no
* errors to correct. So return data[] unmodified
*/
count = 0;
goto finish;
}
memset(&lambda[1], 0, rs->nroots*sizeof(lambda[0]));
lambda[0] = 1;
if (no_eras > 0) {
/* Init lambda to be the erasure locator polynomial */
lambda[1] = rs->alpha_to[MODNN(rs->prim*(rs->nn-1-eras_pos[0]))];
for (i = 1; i < no_eras; i++) {
u = MODNN(rs->prim*(rs->nn-1-eras_pos[i]));
for (j = i+1; j > 0; j--) {
tmp = rs->index_of[lambda[j - 1]];
if(tmp != rs->nn)
lambda[j] ^= rs->alpha_to[MODNN(u + tmp)];
}
}
#if DEBUG >= 1
/* Test code that verifies the erasure locator polynomial just constructed
Needed only for decoder debugging. */
/* find roots of the erasure location polynomial */
for(i=1;i<=no_eras;i++)
reg[i] = rs->index_of[lambda[i]];
count = 0;
for (i = 1,k=rs->iprim-1; i <= rs->nn; i++,k = MODNN(k+rs->iprim)) {
q = 1;
for (j = 1; j <= no_eras; j++)
if (reg[j] != rs->nn) {
reg[j] = MODNN(reg[j] + j);
q ^= rs->alpha_to[reg[j]];
}
if (q != 0)
continue;
/* store root and error location number indices */
root[count] = i;
loc[count] = k;
count++;
}
if (count != no_eras) {
printf("count = %d no_eras = %d\n lambda(x) is WRONG\n",count,no_eras);
count = -1;
goto finish;
}
#if DEBUG >= 2
printf("\n Erasure positions as determined by roots of Eras Loc Poly:\n");
for (i = 0; i < count; i++)
printf("%d ", loc[i]);
printf("\n");
#endif
#endif
}
for (i = 0; i < rs->nroots+1; i++)
b[i] = rs->index_of[lambda[i]];
/*
* Begin Berlekamp-Massey algorithm to determine error+erasure
* locator polynomial
*/
r = no_eras;
el = no_eras;
while (++r <= rs->nroots) { /* r is the step number */
/* Compute discrepancy at the r-th step in poly-form */
discr_r = 0;
for (i = 0; i < r; i++) {
if ((lambda[i] != 0) && (s[r-i-1] != rs->nn)) {
discr_r ^= rs->alpha_to[MODNN(rs->index_of[lambda[i]] + s[r-i-1])];
}
}
discr_r = rs->index_of[discr_r]; /* Index form */
if (discr_r == rs->nn) {
/* 2 lines below: B(x) <-- x*B(x) */
memmove(&b[1],b,rs->nroots*sizeof(b[0]));
b[0] = rs->nn;
} else {
/* 7 lines below: T(x) <-- lambda(x) - discr_r*x*b(x) */
t[0] = lambda[0];
for (i = 0 ; i < rs->nroots; i++) {
if(b[i] != rs->nn)
t[i+1] = lambda[i+1] ^ rs->alpha_to[MODNN(discr_r + b[i])];
else
t[i+1] = lambda[i+1];
}
if (2 * el <= r + no_eras - 1) {
el = r + no_eras - el;
/*
* 2 lines below: B(x) <-- inv(discr_r) *
* lambda(x)
*/
for (i = 0; i <= rs->nroots; i++)
b[i] = (lambda[i] == 0) ? rs->nn : MODNN(rs->index_of[lambda[i]] - discr_r + rs->nn);
} else {
/* 2 lines below: B(x) <-- x*B(x) */
memmove(&b[1],b,rs->nroots*sizeof(b[0]));
b[0] = rs->nn;
}
memcpy(lambda,t,(rs->nroots+1)*sizeof(t[0]));
}
}
/* Convert lambda to index form and compute deg(lambda(x)) */
deg_lambda = 0;
for (i = 0;i < rs->nroots+1; i++){
lambda[i] = rs->index_of[lambda[i]];
if(lambda[i] != rs->nn)
deg_lambda = i;
}
/* Find roots of the error+erasure locator polynomial by Chien search */
memcpy(&reg[1], &lambda[1], rs->nroots*sizeof(reg[0]));
count = 0; /* Number of roots of lambda(x) */
for (i = 1,k=rs->iprim-1; i <= rs->nn; i++,k = MODNN(k+rs->iprim)) {
q = 1; /* lambda[0] is always 0 */
for (j = deg_lambda; j > 0; j--) {
if (reg[j] != rs->nn) {
reg[j] = MODNN(reg[j] + j);
q ^= rs->alpha_to[reg[j]];
}
}
if (q != 0)
continue; /* Not a root */
/* store root (index-form) and error location number */
#if DEBUG>=2
printf("count %d root %d loc %d\n",count,i,k);
#endif
root[count] = i;
loc[count] = k;
/* If we've already found max possible roots,
* abort the search to save time
*/
if(++count == deg_lambda)
break;
}
if (deg_lambda != count) {
/*
* deg(lambda) unequal to number of roots => uncorrectable
* error detected
*/
count = -1;
goto finish;
}
/*
* Compute err+eras evaluator poly omega(x) = s(x)*lambda(x) (modulo
* x**rs->nroots). in index form. Also find deg(omega).
*/
deg_omega = deg_lambda-1;
for (i = 0; i <= deg_omega;i++) {
tmp = 0;
for (j = i; j >= 0; j--) {
if ((s[i - j] != rs->nn) && (lambda[j] != rs->nn))
tmp ^= rs->alpha_to[MODNN(s[i - j] + lambda[j])];
}
omega[i] = rs->index_of[tmp];
}
/*
* Compute error values in poly-form. num1 = omega(inv(X(l))), num2 =
* inv(X(l))**(rs->fcr-1) and den = lambda_pr(inv(X(l))) all in poly-form
*/
for (j = count-1; j >=0; j--) {
num1 = 0;
for (i = deg_omega; i >= 0; i--) {
if (omega[i] != rs->nn)
num1 ^= rs->alpha_to[MODNN(omega[i] + i * root[j])];
}
num2 = rs->alpha_to[MODNN(root[j] * (rs->fcr - 1) + rs->nn)];
den = 0;
/* lambda[i+1] for i even is the formal derivative lambda_pr of lambda[i] */
for (i = MIN(deg_lambda, rs->nroots-1) & ~1; i >= 0; i -=2) {
if(lambda[i+1] != rs->nn)
den ^= rs->alpha_to[MODNN(lambda[i+1] + i * root[j])];
}
#if DEBUG >= 1
if (den == 0) {
printf("\n ERROR: denominator = 0\n");
count = -1;
goto finish;
}
#endif
/* Apply error to data */
if (num1 != 0 && loc[j] >= rs->pad) {
data[loc[j]-rs->pad] ^= rs->alpha_to[MODNN(rs->index_of[num1] + rs->index_of[num2] + rs->nn - rs->index_of[den])];
}
}
finish:
if(eras_pos != NULL) {
for (i = 0; i < count; i++)
eras_pos[i] = loc[i];
}
retval = count;
return retval;
}
+36
View File
@@ -0,0 +1,36 @@
#include <FS.h>
#include <SPIFFS.h>
#include <SD_MMC.h> // (or SD_MMC.h)
void transfert_sd() {
if (!SD_MMC.begin()) {
Serial.println("Carte SD introuvable");
}
else{
Serial.println("Carte SD détectée");
sonde.clearDisplay();
disp.rdis->drawString(0, 2, "Carte SD On");
disp.rdis->drawString(0, 4, "Transfert Data");
File sourceFile = SPIFFS.open("/data.csv", "r");
File destFile = SD_MMC.open("/data.csv","w");
static uint8_t tanpon[512];
while( sourceFile.read( tanpon, 512) ) {
destFile.write( tanpon, 512 );
}
destFile.close();
sourceFile.close();
delay(1000);
//sonde.updateDisplay();
sonde.clearDisplay();
disp.rdis->drawString(0, 2, "Sortir SD");
disp.rdis->drawString(0, 4, "Reboot 5s");
delay(5000);
ESP.restart();
}
}
+227
View File
@@ -0,0 +1,227 @@
const uint8_t FreeMono12pt7bBitmaps[] PROGMEM = {
0x49, 0x24, 0x92, 0x48, 0x01, 0xF8, 0xE7, 0xE7, 0x67, 0x42, 0x42, 0x42,
0x42, 0x09, 0x02, 0x41, 0x10, 0x44, 0x11, 0x1F, 0xF1, 0x10, 0x4C, 0x12,
0x3F, 0xE1, 0x20, 0x48, 0x12, 0x04, 0x81, 0x20, 0x48, 0x04, 0x07, 0xA2,
0x19, 0x02, 0x40, 0x10, 0x03, 0x00, 0x3C, 0x00, 0x80, 0x10, 0x06, 0x01,
0xE0, 0xA7, 0xC0, 0x40, 0x10, 0x04, 0x00, 0x3C, 0x19, 0x84, 0x21, 0x08,
0x66, 0x0F, 0x00, 0x0C, 0x1C, 0x78, 0x01, 0xE0, 0xCC, 0x21, 0x08, 0x43,
0x30, 0x78, 0x3E, 0x30, 0x10, 0x08, 0x02, 0x03, 0x03, 0x47, 0x14, 0x8A,
0x43, 0x11, 0x8F, 0x60, 0xFD, 0xA4, 0x90, 0x05, 0x25, 0x24, 0x92, 0x48,
0x92, 0x24, 0x11, 0x24, 0x89, 0x24, 0x92, 0x92, 0x90, 0x00, 0x04, 0x02,
0x11, 0x07, 0xF0, 0xC0, 0x50, 0x48, 0x42, 0x00, 0x08, 0x04, 0x02, 0x01,
0x00, 0x87, 0xFC, 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, 0x3B, 0x9C, 0xCE,
0x62, 0x00, 0xFF, 0xE0, 0xFF, 0x80, 0x00, 0x80, 0xC0, 0x40, 0x20, 0x20,
0x10, 0x10, 0x08, 0x08, 0x04, 0x04, 0x02, 0x02, 0x01, 0x01, 0x00, 0x80,
0x80, 0x40, 0x00, 0x1C, 0x31, 0x90, 0x58, 0x38, 0x0C, 0x06, 0x03, 0x01,
0x80, 0xC0, 0x60, 0x30, 0x34, 0x13, 0x18, 0x70, 0x30, 0xE1, 0x44, 0x81,
0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x81, 0x1F, 0xC0, 0x1E, 0x10, 0x90,
0x68, 0x10, 0x08, 0x0C, 0x04, 0x04, 0x04, 0x06, 0x06, 0x06, 0x06, 0x0E,
0x07, 0xFE, 0x3E, 0x10, 0x40, 0x08, 0x02, 0x00, 0x80, 0x40, 0xE0, 0x04,
0x00, 0x80, 0x10, 0x04, 0x01, 0x00, 0xD8, 0x63, 0xE0, 0x06, 0x0A, 0x0A,
0x12, 0x22, 0x22, 0x42, 0x42, 0x82, 0x82, 0xFF, 0x02, 0x02, 0x02, 0x0F,
0x7F, 0x20, 0x10, 0x08, 0x04, 0x02, 0xF1, 0x8C, 0x03, 0x00, 0x80, 0x40,
0x20, 0x18, 0x16, 0x18, 0xF0, 0x0F, 0x8C, 0x08, 0x08, 0x04, 0x04, 0x02,
0x79, 0x46, 0xC1, 0xE0, 0x60, 0x28, 0x14, 0x19, 0x08, 0x78, 0xFF, 0x81,
0x81, 0x02, 0x02, 0x02, 0x02, 0x04, 0x04, 0x04, 0x04, 0x08, 0x08, 0x08,
0x08, 0x3E, 0x31, 0xB0, 0x70, 0x18, 0x0C, 0x05, 0x8C, 0x38, 0x63, 0x40,
0x60, 0x30, 0x18, 0x1B, 0x18, 0xF8, 0x3C, 0x31, 0x30, 0x50, 0x28, 0x0C,
0x0F, 0x06, 0x85, 0x3C, 0x80, 0x40, 0x40, 0x20, 0x20, 0x63, 0xE0, 0xFF,
0x80, 0x07, 0xFC, 0x39, 0xCE, 0x00, 0x00, 0x06, 0x33, 0x98, 0xC4, 0x00,
0x00, 0xC0, 0x60, 0x18, 0x0C, 0x06, 0x01, 0x80, 0x0C, 0x00, 0x60, 0x03,
0x00, 0x30, 0x01, 0x00, 0xFF, 0xF0, 0x00, 0x00, 0x0F, 0xFF, 0xC0, 0x06,
0x00, 0x30, 0x01, 0x80, 0x18, 0x01, 0x80, 0xC0, 0x30, 0x18, 0x0C, 0x02,
0x00, 0x00, 0x3E, 0x60, 0xA0, 0x20, 0x10, 0x08, 0x08, 0x18, 0x10, 0x08,
0x00, 0x00, 0x00, 0x01, 0xC0, 0xE0, 0x1C, 0x31, 0x10, 0x50, 0x28, 0x14,
0x3A, 0x25, 0x22, 0x91, 0x4C, 0xA3, 0xF0, 0x08, 0x02, 0x01, 0x80, 0x7C,
0x3F, 0x00, 0x0C, 0x00, 0x48, 0x01, 0x20, 0x04, 0x40, 0x21, 0x00, 0x84,
0x04, 0x08, 0x1F, 0xE0, 0x40, 0x82, 0x01, 0x08, 0x04, 0x20, 0x13, 0xE1,
0xF0, 0xFF, 0x08, 0x11, 0x01, 0x20, 0x24, 0x04, 0x81, 0x1F, 0xC2, 0x06,
0x40, 0x68, 0x05, 0x00, 0xA0, 0x14, 0x05, 0xFF, 0x00, 0x1E, 0x48, 0x74,
0x05, 0x01, 0x80, 0x20, 0x08, 0x02, 0x00, 0x80, 0x20, 0x04, 0x01, 0x01,
0x30, 0x87, 0xC0, 0xFE, 0x10, 0x44, 0x09, 0x02, 0x40, 0x50, 0x14, 0x05,
0x01, 0x40, 0x50, 0x14, 0x0D, 0x02, 0x41, 0x3F, 0x80, 0xFF, 0xC8, 0x09,
0x01, 0x20, 0x04, 0x00, 0x88, 0x1F, 0x02, 0x20, 0x40, 0x08, 0x01, 0x00,
0xA0, 0x14, 0x03, 0xFF, 0xC0, 0xFF, 0xE8, 0x05, 0x00, 0xA0, 0x04, 0x00,
0x88, 0x1F, 0x02, 0x20, 0x40, 0x08, 0x01, 0x00, 0x20, 0x04, 0x01, 0xF0,
0x00, 0x1F, 0x46, 0x19, 0x01, 0x60, 0x28, 0x01, 0x00, 0x20, 0x04, 0x00,
0x83, 0xF0, 0x0B, 0x01, 0x20, 0x23, 0x0C, 0x3E, 0x00, 0xE1, 0xD0, 0x24,
0x09, 0x02, 0x40, 0x90, 0x27, 0xF9, 0x02, 0x40, 0x90, 0x24, 0x09, 0x02,
0x40, 0xB8, 0x70, 0xFE, 0x20, 0x40, 0x81, 0x02, 0x04, 0x08, 0x10, 0x20,
0x40, 0x81, 0x1F, 0xC0, 0x0F, 0xE0, 0x10, 0x02, 0x00, 0x40, 0x08, 0x01,
0x00, 0x20, 0x04, 0x80, 0x90, 0x12, 0x02, 0x40, 0xC6, 0x30, 0x7C, 0x00,
0xF1, 0xE4, 0x0C, 0x41, 0x04, 0x20, 0x44, 0x04, 0x80, 0x5C, 0x06, 0x60,
0x43, 0x04, 0x10, 0x40, 0x84, 0x08, 0x40, 0xCF, 0x07, 0xF8, 0x04, 0x00,
0x80, 0x10, 0x02, 0x00, 0x40, 0x08, 0x01, 0x00, 0x20, 0x04, 0x04, 0x80,
0x90, 0x12, 0x03, 0xFF, 0xC0, 0xE0, 0x3B, 0x01, 0x94, 0x14, 0xA0, 0xA4,
0x89, 0x24, 0x49, 0x14, 0x48, 0xA2, 0x45, 0x12, 0x10, 0x90, 0x04, 0x80,
0x24, 0x01, 0x78, 0x3C, 0xE0, 0xF6, 0x02, 0x50, 0x25, 0x02, 0x48, 0x24,
0xC2, 0x44, 0x24, 0x22, 0x43, 0x24, 0x12, 0x40, 0xA4, 0x0A, 0x40, 0x6F,
0x06, 0x0F, 0x03, 0x0C, 0x60, 0x64, 0x02, 0x80, 0x18, 0x01, 0x80, 0x18,
0x01, 0x80, 0x18, 0x01, 0x40, 0x26, 0x06, 0x30, 0xC0, 0xF0, 0xFF, 0x10,
0x64, 0x05, 0x01, 0x40, 0x50, 0x34, 0x19, 0xFC, 0x40, 0x10, 0x04, 0x01,
0x00, 0x40, 0x3E, 0x00, 0x0F, 0x03, 0x0C, 0x60, 0x64, 0x02, 0x80, 0x18,
0x01, 0x80, 0x18, 0x01, 0x80, 0x18, 0x01, 0x40, 0x26, 0x06, 0x30, 0xC1,
0xF0, 0x0C, 0x01, 0xF1, 0x30, 0xE0, 0xFF, 0x04, 0x18, 0x40, 0xC4, 0x04,
0x40, 0x44, 0x0C, 0x41, 0x87, 0xE0, 0x43, 0x04, 0x10, 0x40, 0x84, 0x04,
0x40, 0x4F, 0x03, 0x1F, 0x48, 0x34, 0x05, 0x01, 0x40, 0x08, 0x01, 0xC0,
0x0E, 0x00, 0x40, 0x18, 0x06, 0x01, 0xE1, 0xA7, 0xC0, 0xFF, 0xF0, 0x86,
0x10, 0x82, 0x00, 0x40, 0x08, 0x01, 0x00, 0x20, 0x04, 0x00, 0x80, 0x10,
0x02, 0x00, 0x40, 0x7F, 0x00, 0xF0, 0xF4, 0x02, 0x40, 0x24, 0x02, 0x40,
0x24, 0x02, 0x40, 0x24, 0x02, 0x40, 0x24, 0x02, 0x40, 0x22, 0x04, 0x30,
0xC0, 0xF0, 0xF8, 0x7C, 0x80, 0x22, 0x01, 0x04, 0x04, 0x10, 0x20, 0x40,
0x80, 0x82, 0x02, 0x10, 0x08, 0x40, 0x11, 0x00, 0x48, 0x01, 0xA0, 0x03,
0x00, 0x0C, 0x00, 0xF8, 0x7C, 0x80, 0x22, 0x00, 0x88, 0xC2, 0x23, 0x10,
0x8E, 0x42, 0x29, 0x09, 0x24, 0x24, 0x90, 0x91, 0x41, 0x85, 0x06, 0x14,
0x18, 0x70, 0x60, 0x80, 0xF0, 0xF2, 0x06, 0x30, 0x41, 0x08, 0x09, 0x80,
0x50, 0x06, 0x00, 0x60, 0x0D, 0x00, 0x88, 0x10, 0xC2, 0x04, 0x60, 0x2F,
0x0F, 0xF0, 0xF2, 0x02, 0x10, 0x41, 0x04, 0x08, 0x80, 0x50, 0x05, 0x00,
0x20, 0x02, 0x00, 0x20, 0x02, 0x00, 0x20, 0x02, 0x01, 0xFC, 0xFF, 0x40,
0xA0, 0x90, 0x40, 0x40, 0x40, 0x20, 0x20, 0x20, 0x10, 0x50, 0x30, 0x18,
0x0F, 0xFC, 0xF2, 0x49, 0x24, 0x92, 0x49, 0x24, 0x9C, 0x80, 0x60, 0x10,
0x08, 0x02, 0x01, 0x00, 0x40, 0x20, 0x08, 0x04, 0x01, 0x00, 0x80, 0x20,
0x10, 0x04, 0x02, 0x00, 0x80, 0x40, 0xE4, 0x92, 0x49, 0x24, 0x92, 0x49,
0x3C, 0x08, 0x0C, 0x09, 0x0C, 0x4C, 0x14, 0x04, 0xFF, 0xFC, 0x84, 0x21,
0x3E, 0x00, 0x60, 0x08, 0x02, 0x3F, 0x98, 0x28, 0x0A, 0x02, 0xC3, 0x9F,
0x30, 0xE0, 0x01, 0x00, 0x08, 0x00, 0x40, 0x02, 0x00, 0x13, 0xE0, 0xA0,
0x86, 0x02, 0x20, 0x09, 0x00, 0x48, 0x02, 0x40, 0x13, 0x01, 0x14, 0x1B,
0x9F, 0x00, 0x1F, 0x4C, 0x19, 0x01, 0x40, 0x28, 0x01, 0x00, 0x20, 0x02,
0x00, 0x60, 0x43, 0xF0, 0x00, 0xC0, 0x08, 0x01, 0x00, 0x20, 0x04, 0x3C,
0x98, 0x52, 0x06, 0x80, 0x50, 0x0A, 0x01, 0x40, 0x24, 0x0C, 0xC2, 0x87,
0x98, 0x3F, 0x18, 0x68, 0x06, 0x01, 0xFF, 0xE0, 0x08, 0x03, 0x00, 0x60,
0xC7, 0xC0, 0x0F, 0x98, 0x08, 0x04, 0x02, 0x07, 0xF8, 0x80, 0x40, 0x20,
0x10, 0x08, 0x04, 0x02, 0x01, 0x03, 0xF8, 0x1E, 0x6C, 0x39, 0x03, 0x40,
0x28, 0x05, 0x00, 0xA0, 0x12, 0x06, 0x61, 0x43, 0xC8, 0x01, 0x00, 0x20,
0x08, 0x3E, 0x00, 0xC0, 0x10, 0x04, 0x01, 0x00, 0x40, 0x13, 0x87, 0x11,
0x82, 0x40, 0x90, 0x24, 0x09, 0x02, 0x40, 0x90, 0x2E, 0x1C, 0x08, 0x04,
0x02, 0x00, 0x00, 0x03, 0xC0, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01, 0x00,
0x80, 0x43, 0xFE, 0x04, 0x08, 0x10, 0x00, 0x1F, 0xC0, 0x81, 0x02, 0x04,
0x08, 0x10, 0x20, 0x40, 0x81, 0x02, 0x0B, 0xE0, 0xE0, 0x02, 0x00, 0x20,
0x02, 0x00, 0x20, 0x02, 0x3C, 0x21, 0x02, 0x60, 0x2C, 0x03, 0x80, 0x24,
0x02, 0x20, 0x21, 0x02, 0x08, 0xE1, 0xF0, 0x78, 0x04, 0x02, 0x01, 0x00,
0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01, 0x00, 0x80, 0x43, 0xFE,
0xDC, 0xE3, 0x19, 0x90, 0x84, 0x84, 0x24, 0x21, 0x21, 0x09, 0x08, 0x48,
0x42, 0x42, 0x17, 0x18, 0xC0, 0x67, 0x83, 0x84, 0x20, 0x22, 0x02, 0x20,
0x22, 0x02, 0x20, 0x22, 0x02, 0x20, 0x2F, 0x07, 0x1F, 0x04, 0x11, 0x01,
0x40, 0x18, 0x03, 0x00, 0x60, 0x0A, 0x02, 0x20, 0x83, 0xE0, 0xCF, 0x85,
0x06, 0x60, 0x24, 0x01, 0x40, 0x14, 0x01, 0x40, 0x16, 0x02, 0x50, 0x44,
0xF8, 0x40, 0x04, 0x00, 0x40, 0x0F, 0x00, 0x1E, 0x6C, 0x3B, 0x03, 0x40,
0x28, 0x05, 0x00, 0xA0, 0x12, 0x06, 0x61, 0x43, 0xC8, 0x01, 0x00, 0x20,
0x04, 0x03, 0xC0, 0xE3, 0x8B, 0x13, 0x80, 0x80, 0x20, 0x08, 0x02, 0x00,
0x80, 0x20, 0x3F, 0x80, 0x1F, 0x58, 0x34, 0x05, 0x80, 0x1E, 0x00, 0x60,
0x06, 0x01, 0xC0, 0xAF, 0xC0, 0x20, 0x04, 0x00, 0x80, 0x10, 0x0F, 0xF0,
0x40, 0x08, 0x01, 0x00, 0x20, 0x04, 0x00, 0x80, 0x10, 0x03, 0x04, 0x3F,
0x00, 0xC1, 0xC8, 0x09, 0x01, 0x20, 0x24, 0x04, 0x80, 0x90, 0x12, 0x02,
0x61, 0xC7, 0xCC, 0xF8, 0xF9, 0x01, 0x08, 0x10, 0x60, 0x81, 0x08, 0x08,
0x40, 0x22, 0x01, 0x20, 0x05, 0x00, 0x30, 0x00, 0xF0, 0x7A, 0x01, 0x10,
0x08, 0x8C, 0x42, 0x62, 0x12, 0x90, 0xA5, 0x05, 0x18, 0x28, 0xC0, 0x86,
0x00, 0x78, 0xF3, 0x04, 0x18, 0x80, 0xD0, 0x06, 0x00, 0x70, 0x09, 0x81,
0x0C, 0x20, 0x6F, 0x8F, 0xF0, 0xF2, 0x02, 0x20, 0x41, 0x04, 0x10, 0x80,
0x88, 0x09, 0x00, 0x50, 0x06, 0x00, 0x20, 0x04, 0x00, 0x40, 0x08, 0x0F,
0xE0, 0xFF, 0x41, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x40, 0xBF,
0xC0, 0x19, 0x08, 0x42, 0x10, 0x84, 0x64, 0x18, 0x42, 0x10, 0x84, 0x20,
0xC0, 0xFF, 0xFF, 0xC0, 0xC1, 0x08, 0x42, 0x10, 0x84, 0x10, 0x4C, 0x42,
0x10, 0x84, 0x26, 0x00, 0x38, 0x13, 0x38, 0x38 };
const GFXglyph FreeMono12pt7bGlyphs[] PROGMEM = {
{ 0, 0, 0, 14, 0, 1 }, // 0x20 ' '
{ 0, 3, 15, 14, 6, -14 }, // 0x21 '!'
{ 6, 8, 7, 14, 3, -14 }, // 0x22 '"'
{ 13, 10, 16, 14, 2, -14 }, // 0x23 '#'
{ 33, 10, 17, 14, 2, -14 }, // 0x24 '$'
{ 55, 10, 15, 14, 2, -14 }, // 0x25 '%'
{ 74, 9, 12, 14, 3, -11 }, // 0x26 '&'
{ 88, 3, 7, 14, 5, -14 }, // 0x27 '''
{ 91, 3, 18, 14, 7, -14 }, // 0x28 '('
{ 98, 3, 18, 14, 4, -14 }, // 0x29 ')'
{ 105, 9, 9, 14, 3, -14 }, // 0x2A '*'
{ 116, 9, 11, 14, 3, -11 }, // 0x2B '+'
{ 129, 5, 7, 14, 3, -3 }, // 0x2C ','
{ 134, 11, 1, 14, 2, -6 }, // 0x2D '-'
{ 136, 3, 3, 14, 5, -2 }, // 0x2E '.'
{ 138, 9, 18, 14, 3, -15 }, // 0x2F '/'
{ 159, 9, 15, 14, 3, -14 }, // 0x30 '0'
{ 176, 7, 14, 14, 4, -13 }, // 0x31 '1'
{ 189, 9, 15, 14, 2, -14 }, // 0x32 '2'
{ 206, 10, 15, 14, 2, -14 }, // 0x33 '3'
{ 225, 8, 15, 14, 3, -14 }, // 0x34 '4'
{ 240, 9, 15, 14, 3, -14 }, // 0x35 '5'
{ 257, 9, 15, 14, 3, -14 }, // 0x36 '6'
{ 274, 8, 15, 14, 3, -14 }, // 0x37 '7'
{ 289, 9, 15, 14, 3, -14 }, // 0x38 '8'
{ 306, 9, 15, 14, 3, -14 }, // 0x39 '9'
{ 323, 3, 10, 14, 5, -9 }, // 0x3A ':'
{ 327, 5, 13, 14, 3, -9 }, // 0x3B ';'
{ 336, 11, 11, 14, 2, -11 }, // 0x3C '<'
{ 352, 12, 4, 14, 1, -8 }, // 0x3D '='
{ 358, 11, 11, 14, 2, -11 }, // 0x3E '>'
{ 374, 9, 14, 14, 3, -13 }, // 0x3F '?'
{ 390, 9, 16, 14, 3, -14 }, // 0x40 '@'
{ 408, 14, 14, 14, 0, -13 }, // 0x41 'A'
{ 433, 11, 14, 14, 2, -13 }, // 0x42 'B'
{ 453, 10, 14, 14, 2, -13 }, // 0x43 'C'
{ 471, 10, 14, 14, 2, -13 }, // 0x44 'D'
{ 489, 11, 14, 14, 2, -13 }, // 0x45 'E'
{ 509, 11, 14, 14, 2, -13 }, // 0x46 'F'
{ 529, 11, 14, 14, 2, -13 }, // 0x47 'G'
{ 549, 10, 14, 14, 2, -13 }, // 0x48 'H'
{ 567, 7, 14, 14, 4, -13 }, // 0x49 'I'
{ 580, 11, 14, 14, 2, -13 }, // 0x4A 'J'
{ 600, 12, 14, 14, 2, -13 }, // 0x4B 'K'
{ 621, 11, 14, 14, 2, -13 }, // 0x4C 'L'
{ 641, 13, 14, 14, 1, -13 }, // 0x4D 'M'
{ 664, 12, 14, 14, 1, -13 }, // 0x4E 'N'
{ 685, 12, 14, 14, 1, -13 }, // 0x4F 'O'
{ 706, 10, 14, 14, 2, -13 }, // 0x50 'P'
{ 724, 12, 17, 14, 1, -13 }, // 0x51 'Q'
{ 750, 12, 14, 14, 2, -13 }, // 0x52 'R'
{ 771, 10, 14, 14, 2, -13 }, // 0x53 'S'
{ 789, 11, 14, 14, 2, -13 }, // 0x54 'T'
{ 809, 12, 14, 14, 1, -13 }, // 0x55 'U'
{ 830, 14, 14, 14, 0, -13 }, // 0x56 'V'
{ 855, 14, 14, 14, 0, -13 }, // 0x57 'W'
{ 880, 12, 14, 14, 1, -13 }, // 0x58 'X'
{ 901, 12, 14, 14, 1, -13 }, // 0x59 'Y'
{ 922, 9, 14, 14, 3, -13 }, // 0x5A 'Z'
{ 938, 3, 18, 14, 7, -14 }, // 0x5B '['
{ 945, 9, 18, 14, 3, -15 }, // 0x5C '\'
{ 966, 3, 18, 14, 5, -14 }, // 0x5D ']'
{ 973, 9, 6, 14, 3, -14 }, // 0x5E '^'
{ 980, 14, 1, 14, 0, 3 }, // 0x5F '_'
{ 982, 4, 4, 14, 4, -15 }, // 0x60 '`'
{ 984, 10, 10, 14, 2, -9 }, // 0x61 'a'
{ 997, 13, 15, 14, 0, -14 }, // 0x62 'b'
{ 1022, 11, 10, 14, 2, -9 }, // 0x63 'c'
{ 1036, 11, 15, 14, 2, -14 }, // 0x64 'd'
{ 1057, 10, 10, 14, 2, -9 }, // 0x65 'e'
{ 1070, 9, 15, 14, 4, -14 }, // 0x66 'f'
{ 1087, 11, 14, 14, 2, -9 }, // 0x67 'g'
{ 1107, 10, 15, 14, 2, -14 }, // 0x68 'h'
{ 1126, 9, 15, 14, 3, -14 }, // 0x69 'i'
{ 1143, 7, 19, 14, 3, -14 }, // 0x6A 'j'
{ 1160, 12, 15, 14, 1, -14 }, // 0x6B 'k'
{ 1183, 9, 15, 14, 3, -14 }, // 0x6C 'l'
{ 1200, 13, 10, 14, 1, -9 }, // 0x6D 'm'
{ 1217, 12, 10, 14, 1, -9 }, // 0x6E 'n'
{ 1232, 11, 10, 14, 2, -9 }, // 0x6F 'o'
{ 1246, 12, 14, 14, 1, -9 }, // 0x70 'p'
{ 1267, 11, 14, 14, 2, -9 }, // 0x71 'q'
{ 1287, 10, 10, 14, 3, -9 }, // 0x72 'r'
{ 1300, 10, 10, 14, 2, -9 }, // 0x73 's'
{ 1313, 11, 14, 14, 1, -13 }, // 0x74 't'
{ 1333, 11, 10, 14, 2, -9 }, // 0x75 'u'
{ 1347, 13, 10, 14, 1, -9 }, // 0x76 'v'
{ 1364, 13, 10, 14, 1, -9 }, // 0x77 'w'
{ 1381, 12, 10, 14, 1, -9 }, // 0x78 'x'
{ 1396, 12, 14, 14, 1, -9 }, // 0x79 'y'
{ 1417, 9, 10, 14, 3, -9 }, // 0x7A 'z'
{ 1429, 5, 18, 14, 5, -14 }, // 0x7B '{'
{ 1441, 1, 18, 14, 7, -14 }, // 0x7C '|'
{ 1444, 5, 18, 14, 5, -14 }, // 0x7D '}'
{ 1456, 10, 3, 14, 2, -7 } }; // 0x7E '~'
const GFXfont FreeMono12pt7b PROGMEM = {
(uint8_t *)FreeMono12pt7bBitmaps,
(GFXglyph *)FreeMono12pt7bGlyphs,
0x20, 0x7E, 24 };
// Approx. 2132 bytes
+176
View File
@@ -0,0 +1,176 @@
const uint8_t FreeMono9pt7bBitmaps[] PROGMEM = {
0xAA, 0xA8, 0x0C, 0xED, 0x24, 0x92, 0x48, 0x24, 0x48, 0x91, 0x2F, 0xE4,
0x89, 0x7F, 0x28, 0x51, 0x22, 0x40, 0x08, 0x3E, 0x62, 0x40, 0x30, 0x0E,
0x01, 0x81, 0xC3, 0xBE, 0x08, 0x08, 0x71, 0x12, 0x23, 0x80, 0x23, 0xB8,
0x0E, 0x22, 0x44, 0x70, 0x38, 0x81, 0x02, 0x06, 0x1A, 0x65, 0x46, 0xC8,
0xEC, 0xE9, 0x24, 0x5A, 0xAA, 0xA9, 0x40, 0xA9, 0x55, 0x5A, 0x80, 0x10,
0x22, 0x4B, 0xE3, 0x05, 0x11, 0x00, 0x10, 0x20, 0x47, 0xF1, 0x02, 0x04,
0x00, 0x6B, 0x48, 0xFF, 0x00, 0xF0, 0x02, 0x08, 0x10, 0x60, 0x81, 0x04,
0x08, 0x20, 0x41, 0x02, 0x08, 0x00, 0x38, 0x8A, 0x0C, 0x18, 0x30, 0x60,
0xC1, 0x82, 0x88, 0xE0, 0x27, 0x28, 0x42, 0x10, 0x84, 0x21, 0x3E, 0x38,
0x8A, 0x08, 0x10, 0x20, 0x82, 0x08, 0x61, 0x03, 0xF8, 0x7C, 0x06, 0x02,
0x02, 0x1C, 0x06, 0x01, 0x01, 0x01, 0x42, 0x3C, 0x18, 0xA2, 0x92, 0x8A,
0x28, 0xBF, 0x08, 0x21, 0xC0, 0x7C, 0x81, 0x03, 0xE4, 0x40, 0x40, 0x81,
0x03, 0x88, 0xE0, 0x1E, 0x41, 0x04, 0x0B, 0x98, 0xB0, 0xC1, 0xC2, 0x88,
0xE0, 0xFE, 0x04, 0x08, 0x20, 0x40, 0x82, 0x04, 0x08, 0x20, 0x40, 0x38,
0x8A, 0x0C, 0x14, 0x47, 0x11, 0x41, 0x83, 0x8C, 0xE0, 0x38, 0x8A, 0x1C,
0x18, 0x68, 0xCE, 0x81, 0x04, 0x13, 0xC0, 0xF0, 0x0F, 0x6C, 0x00, 0xD2,
0xD2, 0x00, 0x03, 0x04, 0x18, 0x60, 0x60, 0x18, 0x04, 0x03, 0xFF, 0x80,
0x00, 0x1F, 0xF0, 0x40, 0x18, 0x03, 0x00, 0x60, 0x20, 0x60, 0xC0, 0x80,
0x3D, 0x84, 0x08, 0x30, 0xC2, 0x00, 0x00, 0x00, 0x30, 0x3C, 0x46, 0x82,
0x8E, 0xB2, 0xA2, 0xA2, 0x9F, 0x80, 0x80, 0x40, 0x3C, 0x3C, 0x01, 0x40,
0x28, 0x09, 0x01, 0x10, 0x42, 0x0F, 0xC1, 0x04, 0x40, 0x9E, 0x3C, 0xFE,
0x21, 0x90, 0x48, 0x67, 0xE2, 0x09, 0x02, 0x81, 0x41, 0xFF, 0x80, 0x3E,
0xB0, 0xF0, 0x30, 0x08, 0x04, 0x02, 0x00, 0x80, 0x60, 0x8F, 0x80, 0xFE,
0x21, 0x90, 0x68, 0x14, 0x0A, 0x05, 0x02, 0x83, 0x43, 0x7F, 0x00, 0xFF,
0x20, 0x90, 0x08, 0x87, 0xC2, 0x21, 0x00, 0x81, 0x40, 0xFF, 0xC0, 0xFF,
0xA0, 0x50, 0x08, 0x87, 0xC2, 0x21, 0x00, 0x80, 0x40, 0x78, 0x00, 0x1E,
0x98, 0x6C, 0x0A, 0x00, 0x80, 0x20, 0xF8, 0x0B, 0x02, 0x60, 0x87, 0xC0,
0xE3, 0xA0, 0x90, 0x48, 0x27, 0xF2, 0x09, 0x04, 0x82, 0x41, 0x71, 0xC0,
0xF9, 0x08, 0x42, 0x10, 0x84, 0x27, 0xC0, 0x1F, 0x02, 0x02, 0x02, 0x02,
0x02, 0x82, 0x82, 0xC6, 0x78, 0xE3, 0xA1, 0x11, 0x09, 0x05, 0x83, 0x21,
0x08, 0x84, 0x41, 0x70, 0xC0, 0xE0, 0x40, 0x40, 0x40, 0x40, 0x40, 0x41,
0x41, 0x41, 0xFF, 0xE0, 0xEC, 0x19, 0x45, 0x28, 0xA4, 0xA4, 0x94, 0x91,
0x12, 0x02, 0x40, 0x5C, 0x1C, 0xC3, 0xB0, 0x94, 0x4A, 0x24, 0x92, 0x49,
0x14, 0x8A, 0x43, 0x70, 0x80, 0x1E, 0x31, 0x90, 0x50, 0x18, 0x0C, 0x06,
0x02, 0x82, 0x63, 0x0F, 0x00, 0xFE, 0x43, 0x41, 0x41, 0x42, 0x7C, 0x40,
0x40, 0x40, 0xF0, 0x1C, 0x31, 0x90, 0x50, 0x18, 0x0C, 0x06, 0x02, 0x82,
0x63, 0x1F, 0x04, 0x07, 0x92, 0x30, 0xFE, 0x21, 0x90, 0x48, 0x24, 0x23,
0xE1, 0x10, 0x84, 0x41, 0x70, 0xC0, 0x3A, 0xCD, 0x0A, 0x03, 0x01, 0x80,
0xC1, 0xC7, 0x78, 0xFF, 0xC4, 0x62, 0x21, 0x00, 0x80, 0x40, 0x20, 0x10,
0x08, 0x1F, 0x00, 0xE3, 0xA0, 0x90, 0x48, 0x24, 0x12, 0x09, 0x04, 0x82,
0x22, 0x0E, 0x00, 0xF1, 0xE8, 0x10, 0x82, 0x10, 0x42, 0x10, 0x22, 0x04,
0x80, 0x50, 0x0C, 0x00, 0x80, 0xF1, 0xE8, 0x09, 0x11, 0x25, 0x44, 0xA8,
0x55, 0x0C, 0xA1, 0x8C, 0x31, 0x84, 0x30, 0xE3, 0xA0, 0x88, 0x82, 0x80,
0x80, 0xC0, 0x90, 0x44, 0x41, 0x71, 0xC0, 0xE3, 0xA0, 0x88, 0x82, 0x81,
0x40, 0x40, 0x20, 0x10, 0x08, 0x1F, 0x00, 0xFD, 0x0A, 0x20, 0x81, 0x04,
0x10, 0x21, 0x83, 0xFC, 0xEA, 0xAA, 0xAA, 0xC0, 0x80, 0x81, 0x03, 0x02,
0x04, 0x04, 0x08, 0x08, 0x10, 0x10, 0x20, 0x20, 0xD5, 0x55, 0x55, 0xC0,
0x10, 0x51, 0x22, 0x28, 0x20, 0xFF, 0xE0, 0x88, 0x80, 0x7E, 0x00, 0x80,
0x47, 0xEC, 0x14, 0x0A, 0x0C, 0xFB, 0xC0, 0x20, 0x10, 0x0B, 0xC6, 0x12,
0x05, 0x02, 0x81, 0x40, 0xB0, 0xB7, 0x80, 0x3A, 0x8E, 0x0C, 0x08, 0x10,
0x10, 0x9E, 0x03, 0x00, 0x80, 0x47, 0xA4, 0x34, 0x0A, 0x05, 0x02, 0x81,
0x21, 0x8F, 0x60, 0x3C, 0x43, 0x81, 0xFF, 0x80, 0x80, 0x61, 0x3E, 0x3D,
0x04, 0x3E, 0x41, 0x04, 0x10, 0x41, 0x0F, 0x80, 0x3D, 0xA1, 0xA0, 0x50,
0x28, 0x14, 0x09, 0x0C, 0x7A, 0x01, 0x01, 0x87, 0x80, 0xC0, 0x20, 0x10,
0x0B, 0xC6, 0x32, 0x09, 0x04, 0x82, 0x41, 0x20, 0xB8, 0xE0, 0x10, 0x01,
0xC0, 0x81, 0x02, 0x04, 0x08, 0x11, 0xFC, 0x10, 0x3E, 0x10, 0x84, 0x21,
0x08, 0x42, 0x3F, 0x00, 0xC0, 0x40, 0x40, 0x4F, 0x44, 0x58, 0x70, 0x48,
0x44, 0x42, 0xC7, 0x70, 0x20, 0x40, 0x81, 0x02, 0x04, 0x08, 0x10, 0x23,
0xF8, 0xB7, 0x64, 0x62, 0x31, 0x18, 0x8C, 0x46, 0x23, 0x91, 0x5E, 0x31,
0x90, 0x48, 0x24, 0x12, 0x09, 0x05, 0xC7, 0x3E, 0x31, 0xA0, 0x30, 0x18,
0x0C, 0x05, 0x8C, 0x7C, 0xDE, 0x30, 0x90, 0x28, 0x14, 0x0A, 0x05, 0x84,
0xBC, 0x40, 0x20, 0x38, 0x00, 0x3D, 0xA1, 0xA0, 0x50, 0x28, 0x14, 0x09,
0x0C, 0x7A, 0x01, 0x00, 0x80, 0xE0, 0xCE, 0xA1, 0x82, 0x04, 0x08, 0x10,
0x7C, 0x3A, 0x8D, 0x0B, 0x80, 0xF0, 0x70, 0xDE, 0x40, 0x40, 0xFC, 0x40,
0x40, 0x40, 0x40, 0x40, 0x41, 0x3E, 0xC3, 0x41, 0x41, 0x41, 0x41, 0x41,
0x43, 0x3D, 0xE3, 0xA0, 0x90, 0x84, 0x42, 0x20, 0xA0, 0x50, 0x10, 0xE3,
0xC0, 0x92, 0x4B, 0x25, 0x92, 0xA9, 0x98, 0x44, 0xE3, 0x31, 0x05, 0x01,
0x01, 0x41, 0x11, 0x05, 0xC7, 0xE3, 0xA0, 0x90, 0x84, 0x42, 0x40, 0xA0,
0x60, 0x10, 0x10, 0x08, 0x3E, 0x00, 0xFD, 0x08, 0x20, 0x82, 0x08, 0x10,
0xBF, 0x29, 0x24, 0xA2, 0x49, 0x26, 0xFF, 0xF8, 0x89, 0x24, 0x8A, 0x49,
0x2C, 0x61, 0x24, 0x30 };
const GFXglyph FreeMono9pt7bGlyphs[] PROGMEM = {
{ 0, 0, 0, 11, 0, 1 }, // 0x20 ' '
{ 0, 2, 11, 11, 4, -10 }, // 0x21 '!'
{ 3, 6, 5, 11, 2, -10 }, // 0x22 '"'
{ 7, 7, 12, 11, 2, -10 }, // 0x23 '#'
{ 18, 8, 12, 11, 1, -10 }, // 0x24 '$'
{ 30, 7, 11, 11, 2, -10 }, // 0x25 '%'
{ 40, 7, 10, 11, 2, -9 }, // 0x26 '&'
{ 49, 3, 5, 11, 4, -10 }, // 0x27 '''
{ 51, 2, 13, 11, 5, -10 }, // 0x28 '('
{ 55, 2, 13, 11, 4, -10 }, // 0x29 ')'
{ 59, 7, 7, 11, 2, -10 }, // 0x2A '*'
{ 66, 7, 7, 11, 2, -8 }, // 0x2B '+'
{ 73, 3, 5, 11, 2, -1 }, // 0x2C ','
{ 75, 9, 1, 11, 1, -5 }, // 0x2D '-'
{ 77, 2, 2, 11, 4, -1 }, // 0x2E '.'
{ 78, 7, 13, 11, 2, -11 }, // 0x2F '/'
{ 90, 7, 11, 11, 2, -10 }, // 0x30 '0'
{ 100, 5, 11, 11, 3, -10 }, // 0x31 '1'
{ 107, 7, 11, 11, 2, -10 }, // 0x32 '2'
{ 117, 8, 11, 11, 1, -10 }, // 0x33 '3'
{ 128, 6, 11, 11, 3, -10 }, // 0x34 '4'
{ 137, 7, 11, 11, 2, -10 }, // 0x35 '5'
{ 147, 7, 11, 11, 2, -10 }, // 0x36 '6'
{ 157, 7, 11, 11, 2, -10 }, // 0x37 '7'
{ 167, 7, 11, 11, 2, -10 }, // 0x38 '8'
{ 177, 7, 11, 11, 2, -10 }, // 0x39 '9'
{ 187, 2, 8, 11, 4, -7 }, // 0x3A ':'
{ 189, 3, 11, 11, 3, -7 }, // 0x3B ';'
{ 194, 8, 8, 11, 1, -8 }, // 0x3C '<'
{ 202, 9, 4, 11, 1, -6 }, // 0x3D '='
{ 207, 9, 8, 11, 1, -8 }, // 0x3E '>'
{ 216, 7, 10, 11, 2, -9 }, // 0x3F '?'
{ 225, 8, 12, 11, 2, -10 }, // 0x40 '@'
{ 237, 11, 10, 11, 0, -9 }, // 0x41 'A'
{ 251, 9, 10, 11, 1, -9 }, // 0x42 'B'
{ 263, 9, 10, 11, 1, -9 }, // 0x43 'C'
{ 275, 9, 10, 11, 1, -9 }, // 0x44 'D'
{ 287, 9, 10, 11, 1, -9 }, // 0x45 'E'
{ 299, 9, 10, 11, 1, -9 }, // 0x46 'F'
{ 311, 10, 10, 11, 1, -9 }, // 0x47 'G'
{ 324, 9, 10, 11, 1, -9 }, // 0x48 'H'
{ 336, 5, 10, 11, 3, -9 }, // 0x49 'I'
{ 343, 8, 10, 11, 2, -9 }, // 0x4A 'J'
{ 353, 9, 10, 11, 1, -9 }, // 0x4B 'K'
{ 365, 8, 10, 11, 2, -9 }, // 0x4C 'L'
{ 375, 11, 10, 11, 0, -9 }, // 0x4D 'M'
{ 389, 9, 10, 11, 1, -9 }, // 0x4E 'N'
{ 401, 9, 10, 11, 1, -9 }, // 0x4F 'O'
{ 413, 8, 10, 11, 1, -9 }, // 0x50 'P'
{ 423, 9, 13, 11, 1, -9 }, // 0x51 'Q'
{ 438, 9, 10, 11, 1, -9 }, // 0x52 'R'
{ 450, 7, 10, 11, 2, -9 }, // 0x53 'S'
{ 459, 9, 10, 11, 1, -9 }, // 0x54 'T'
{ 471, 9, 10, 11, 1, -9 }, // 0x55 'U'
{ 483, 11, 10, 11, 0, -9 }, // 0x56 'V'
{ 497, 11, 10, 11, 0, -9 }, // 0x57 'W'
{ 511, 9, 10, 11, 1, -9 }, // 0x58 'X'
{ 523, 9, 10, 11, 1, -9 }, // 0x59 'Y'
{ 535, 7, 10, 11, 2, -9 }, // 0x5A 'Z'
{ 544, 2, 13, 11, 5, -10 }, // 0x5B '['
{ 548, 7, 13, 11, 2, -11 }, // 0x5C '\'
{ 560, 2, 13, 11, 4, -10 }, // 0x5D ']'
{ 564, 7, 5, 11, 2, -10 }, // 0x5E '^'
{ 569, 11, 1, 11, 0, 2 }, // 0x5F '_'
{ 571, 3, 3, 11, 3, -11 }, // 0x60 '`'
{ 573, 9, 8, 11, 1, -7 }, // 0x61 'a'
{ 582, 9, 11, 11, 1, -10 }, // 0x62 'b'
{ 595, 7, 8, 11, 2, -7 }, // 0x63 'c'
{ 602, 9, 11, 11, 1, -10 }, // 0x64 'd'
{ 615, 8, 8, 11, 1, -7 }, // 0x65 'e'
{ 623, 6, 11, 11, 3, -10 }, // 0x66 'f'
{ 632, 9, 11, 11, 1, -7 }, // 0x67 'g'
{ 645, 9, 11, 11, 1, -10 }, // 0x68 'h'
{ 658, 7, 10, 11, 2, -9 }, // 0x69 'i'
{ 667, 5, 13, 11, 3, -9 }, // 0x6A 'j'
{ 676, 8, 11, 11, 2, -10 }, // 0x6B 'k'
{ 687, 7, 11, 11, 2, -10 }, // 0x6C 'l'
{ 697, 9, 8, 11, 1, -7 }, // 0x6D 'm'
{ 706, 9, 8, 11, 1, -7 }, // 0x6E 'n'
{ 715, 9, 8, 11, 1, -7 }, // 0x6F 'o'
{ 724, 9, 11, 11, 1, -7 }, // 0x70 'p'
{ 737, 9, 11, 11, 1, -7 }, // 0x71 'q'
{ 750, 7, 8, 11, 3, -7 }, // 0x72 'r'
{ 757, 7, 8, 11, 2, -7 }, // 0x73 's'
{ 764, 8, 10, 11, 2, -9 }, // 0x74 't'
{ 774, 8, 8, 11, 1, -7 }, // 0x75 'u'
{ 782, 9, 8, 11, 1, -7 }, // 0x76 'v'
{ 791, 9, 8, 11, 1, -7 }, // 0x77 'w'
{ 800, 9, 8, 11, 1, -7 }, // 0x78 'x'
{ 809, 9, 11, 11, 1, -7 }, // 0x79 'y'
{ 822, 7, 8, 11, 2, -7 }, // 0x7A 'z'
{ 829, 3, 13, 11, 4, -10 }, // 0x7B '{'
{ 834, 1, 13, 11, 5, -10 }, // 0x7C '|'
{ 836, 3, 13, 11, 4, -10 }, // 0x7D '}'
{ 841, 7, 3, 11, 2, -6 } }; // 0x7E '~'
const GFXfont FreeMono9pt7b PROGMEM = {
(uint8_t *)FreeMono9pt7bBitmaps,
(GFXglyph *)FreeMono9pt7bGlyphs,
0x20, 0x7E, 18 };
// Approx. 1516 bytes
+270
View File
@@ -0,0 +1,270 @@
const uint8_t FreeSans12pt7bBitmaps[] PROGMEM = {
0xFF, 0xFF, 0xFF, 0xF0, 0xF0, 0xCF, 0x3C, 0xF3, 0x8A, 0x20, 0x06, 0x30,
0x31, 0x03, 0x18, 0x18, 0xC7, 0xFF, 0xBF, 0xFC, 0x31, 0x03, 0x18, 0x18,
0xC7, 0xFF, 0xBF, 0xFC, 0x31, 0x01, 0x18, 0x18, 0xC0, 0xC6, 0x06, 0x30,
0x04, 0x03, 0xE1, 0xFF, 0x72, 0x6C, 0x47, 0x88, 0xF1, 0x07, 0x20, 0x7E,
0x03, 0xF0, 0x17, 0x02, 0x3C, 0x47, 0x88, 0xF1, 0x1B, 0x26, 0x7F, 0xC3,
0xE0, 0x10, 0x02, 0x00, 0x00, 0x06, 0x03, 0xC0, 0x40, 0x7E, 0x0C, 0x0E,
0x70, 0x80, 0xC3, 0x18, 0x0C, 0x31, 0x00, 0xE7, 0x30, 0x07, 0xE6, 0x00,
0x3C, 0x40, 0x00, 0x0C, 0x7C, 0x00, 0x8F, 0xE0, 0x19, 0xC7, 0x01, 0x18,
0x30, 0x31, 0x83, 0x02, 0x1C, 0x70, 0x40, 0xFE, 0x04, 0x07, 0xC0, 0x0F,
0x00, 0x7E, 0x03, 0x9C, 0x0C, 0x30, 0x30, 0xC0, 0xE7, 0x01, 0xF8, 0x03,
0x80, 0x3E, 0x01, 0xCC, 0x6E, 0x19, 0xB0, 0x7C, 0xC0, 0xF3, 0x03, 0xCE,
0x1F, 0x9F, 0xE6, 0x1E, 0x1C, 0xFF, 0xA0, 0x08, 0x8C, 0x66, 0x31, 0x98,
0xC6, 0x31, 0x8C, 0x63, 0x08, 0x63, 0x08, 0x61, 0x0C, 0x20, 0x82, 0x18,
0xC3, 0x18, 0xC3, 0x18, 0xC6, 0x31, 0x8C, 0x62, 0x31, 0x88, 0xC4, 0x62,
0x00, 0x10, 0x23, 0x5B, 0xE3, 0x8D, 0x91, 0x00, 0x0C, 0x03, 0x00, 0xC0,
0x30, 0xFF, 0xFF, 0xF0, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0xF5, 0x60,
0xFF, 0xF0, 0xF0, 0x02, 0x0C, 0x10, 0x20, 0xC1, 0x02, 0x0C, 0x10, 0x20,
0xC1, 0x02, 0x0C, 0x10, 0x20, 0xC1, 0x00, 0x1F, 0x07, 0xF1, 0xC7, 0x30,
0x6E, 0x0F, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3C,
0x0E, 0xC1, 0x9C, 0x71, 0xFC, 0x1F, 0x00, 0x08, 0xCF, 0xFF, 0x8C, 0x63,
0x18, 0xC6, 0x31, 0x8C, 0x63, 0x18, 0x1F, 0x0F, 0xF9, 0x87, 0x60, 0x7C,
0x06, 0x00, 0xC0, 0x18, 0x07, 0x01, 0xC0, 0xF0, 0x78, 0x1C, 0x06, 0x00,
0x80, 0x30, 0x07, 0xFF, 0xFF, 0xE0, 0x3F, 0x0F, 0xF3, 0x87, 0x60, 0x6C,
0x0C, 0x01, 0x80, 0x70, 0x7C, 0x0F, 0x80, 0x18, 0x01, 0x80, 0x3C, 0x07,
0x80, 0xD8, 0x73, 0xFC, 0x1F, 0x00, 0x01, 0x80, 0x70, 0x0E, 0x03, 0xC0,
0xD8, 0x1B, 0x06, 0x61, 0x8C, 0x21, 0x8C, 0x33, 0x06, 0x7F, 0xFF, 0xFE,
0x03, 0x00, 0x60, 0x0C, 0x01, 0x80, 0x3F, 0xCF, 0xF9, 0x80, 0x30, 0x06,
0x00, 0xDE, 0x1F, 0xE7, 0x0E, 0x00, 0xE0, 0x0C, 0x01, 0x80, 0x30, 0x07,
0x81, 0xF8, 0x73, 0xFC, 0x1F, 0x00, 0x0F, 0x07, 0xF9, 0xC3, 0x30, 0x74,
0x01, 0x80, 0x33, 0xC7, 0xFE, 0xF0, 0xDC, 0x1F, 0x01, 0xE0, 0x3C, 0x06,
0xC1, 0xDC, 0x71, 0xFC, 0x1F, 0x00, 0xFF, 0xFF, 0xFC, 0x01, 0x00, 0x60,
0x18, 0x02, 0x00, 0xC0, 0x30, 0x06, 0x01, 0x80, 0x30, 0x04, 0x01, 0x80,
0x30, 0x06, 0x01, 0x80, 0x30, 0x00, 0x1F, 0x07, 0xF1, 0xC7, 0x30, 0x66,
0x0C, 0xC1, 0x8C, 0x61, 0xFC, 0x3F, 0x8E, 0x3B, 0x01, 0xE0, 0x3C, 0x07,
0x80, 0xD8, 0x31, 0xFC, 0x1F, 0x00, 0x1F, 0x07, 0xF1, 0xC7, 0x70, 0x6C,
0x07, 0x80, 0xF0, 0x1E, 0x07, 0x61, 0xEF, 0xFC, 0x79, 0x80, 0x30, 0x05,
0x81, 0x98, 0x73, 0xFC, 0x1E, 0x00, 0xF0, 0x00, 0x03, 0xC0, 0xF0, 0x00,
0x0F, 0x56, 0x00, 0x00, 0x07, 0x01, 0xE0, 0xF8, 0x3C, 0x0F, 0x00, 0xE0,
0x07, 0xC0, 0x0F, 0x00, 0x3C, 0x00, 0xF0, 0x01, 0xFF, 0xFF, 0xFF, 0x00,
0x00, 0x00, 0xFF, 0xFF, 0xFF, 0x00, 0x0E, 0x00, 0x78, 0x01, 0xF0, 0x07,
0xC0, 0x0F, 0x00, 0x70, 0x1E, 0x0F, 0x03, 0xC0, 0xF0, 0x08, 0x00, 0x1F,
0x1F, 0xEE, 0x1B, 0x03, 0xC0, 0xC0, 0x30, 0x0C, 0x06, 0x03, 0x81, 0xC0,
0xE0, 0x30, 0x0C, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x03, 0x00, 0x00, 0xFE,
0x00, 0x0F, 0xFE, 0x00, 0xF0, 0x3E, 0x07, 0x00, 0x3C, 0x38, 0x00, 0x30,
0xC1, 0xE0, 0x66, 0x0F, 0xD9, 0xD8, 0x61, 0xC3, 0xC3, 0x07, 0x0F, 0x1C,
0x1C, 0x3C, 0x60, 0x60, 0xF1, 0x81, 0x83, 0xC6, 0x06, 0x1B, 0x18, 0x38,
0xEE, 0x71, 0xE7, 0x18, 0xFD, 0xF8, 0x71, 0xE7, 0xC0, 0xE0, 0x00, 0x01,
0xE0, 0x00, 0x01, 0xFF, 0xC0, 0x01, 0xFC, 0x00, 0x03, 0xC0, 0x03, 0xC0,
0x03, 0xC0, 0x07, 0xE0, 0x06, 0x60, 0x06, 0x60, 0x0E, 0x70, 0x0C, 0x30,
0x0C, 0x30, 0x1C, 0x38, 0x18, 0x18, 0x1F, 0xF8, 0x3F, 0xFC, 0x30, 0x1C,
0x30, 0x0C, 0x70, 0x0E, 0x60, 0x06, 0x60, 0x06, 0xFF, 0xC7, 0xFF, 0x30,
0x19, 0x80, 0x6C, 0x03, 0x60, 0x1B, 0x00, 0xD8, 0x0C, 0xFF, 0xC7, 0xFF,
0x30, 0x0D, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00, 0x78, 0x06, 0xFF, 0xF7,
0xFE, 0x00, 0x07, 0xE0, 0x3F, 0xF0, 0xE0, 0x73, 0x80, 0x66, 0x00, 0x6C,
0x00, 0x30, 0x00, 0x60, 0x00, 0xC0, 0x01, 0x80, 0x03, 0x00, 0x06, 0x00,
0x06, 0x00, 0x6C, 0x00, 0xDC, 0x03, 0x1E, 0x0E, 0x1F, 0xF8, 0x0F, 0xC0,
0xFF, 0x83, 0xFF, 0x8C, 0x07, 0x30, 0x0E, 0xC0, 0x1B, 0x00, 0x7C, 0x00,
0xF0, 0x03, 0xC0, 0x0F, 0x00, 0x3C, 0x00, 0xF0, 0x03, 0xC0, 0x1F, 0x00,
0x6C, 0x03, 0xB0, 0x1C, 0xFF, 0xE3, 0xFF, 0x00, 0xFF, 0xFF, 0xFF, 0xC0,
0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xFF, 0xEF, 0xFE, 0xC0,
0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xFF, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0x00, 0x60, 0x0C, 0x01, 0x80, 0x30, 0x06, 0x00, 0xFF, 0xDF,
0xFB, 0x00, 0x60, 0x0C, 0x01, 0x80, 0x30, 0x06, 0x00, 0xC0, 0x18, 0x00,
0x07, 0xF0, 0x1F, 0xFC, 0x3C, 0x1E, 0x70, 0x06, 0x60, 0x03, 0xE0, 0x00,
0xC0, 0x00, 0xC0, 0x00, 0xC0, 0x7F, 0xC0, 0x7F, 0xC0, 0x03, 0xC0, 0x03,
0x60, 0x03, 0x60, 0x07, 0x30, 0x0F, 0x3C, 0x1F, 0x1F, 0xFB, 0x07, 0xE1,
0xC0, 0x1E, 0x00, 0xF0, 0x07, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00, 0x78,
0x03, 0xFF, 0xFF, 0xFF, 0xF0, 0x07, 0x80, 0x3C, 0x01, 0xE0, 0x0F, 0x00,
0x78, 0x03, 0xC0, 0x1E, 0x00, 0xC0, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0x01,
0x80, 0xC0, 0x60, 0x30, 0x18, 0x0C, 0x06, 0x03, 0x01, 0x80, 0xC0, 0x60,
0x3C, 0x1E, 0x0F, 0x07, 0xC7, 0x7F, 0x1F, 0x00, 0xC0, 0x3B, 0x01, 0xCC,
0x0E, 0x30, 0x70, 0xC3, 0x83, 0x1C, 0x0C, 0xE0, 0x33, 0x80, 0xDE, 0x03,
0xDC, 0x0E, 0x38, 0x30, 0x60, 0xC1, 0xC3, 0x03, 0x8C, 0x06, 0x30, 0x1C,
0xC0, 0x3B, 0x00, 0x60, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x0C,
0x03, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x30, 0x0C, 0x03, 0x00,
0xFF, 0xFF, 0xF0, 0xE0, 0x07, 0xE0, 0x07, 0xF0, 0x0F, 0xF0, 0x0F, 0xD0,
0x0F, 0xD8, 0x1B, 0xD8, 0x1B, 0xD8, 0x1B, 0xCC, 0x33, 0xCC, 0x33, 0xCC,
0x33, 0xC6, 0x63, 0xC6, 0x63, 0xC6, 0x63, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
0xC3, 0xC1, 0x83, 0xE0, 0x1F, 0x00, 0xFC, 0x07, 0xE0, 0x3D, 0x81, 0xEE,
0x0F, 0x30, 0x79, 0xC3, 0xC6, 0x1E, 0x18, 0xF0, 0xE7, 0x83, 0x3C, 0x1D,
0xE0, 0x6F, 0x01, 0xF8, 0x0F, 0xC0, 0x3E, 0x01, 0xC0, 0x03, 0xE0, 0x0F,
0xFC, 0x0F, 0x07, 0x86, 0x00, 0xC6, 0x00, 0x33, 0x00, 0x1B, 0x00, 0x07,
0x80, 0x03, 0xC0, 0x01, 0xE0, 0x00, 0xF0, 0x00, 0x78, 0x00, 0x36, 0x00,
0x33, 0x00, 0x18, 0xC0, 0x18, 0x78, 0x3C, 0x1F, 0xFC, 0x03, 0xF8, 0x00,
0xFF, 0x8F, 0xFE, 0xC0, 0x6C, 0x03, 0xC0, 0x3C, 0x03, 0xC0, 0x3C, 0x07,
0xFF, 0xEF, 0xFC, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00,
0xC0, 0x0C, 0x00, 0x03, 0xE0, 0x0F, 0xFC, 0x0F, 0x07, 0x86, 0x00, 0xC6,
0x00, 0x33, 0x00, 0x1B, 0x00, 0x07, 0x80, 0x03, 0xC0, 0x01, 0xE0, 0x00,
0xF0, 0x00, 0x78, 0x00, 0x36, 0x00, 0x33, 0x01, 0x98, 0xC0, 0xFC, 0x78,
0x3C, 0x1F, 0xFF, 0x03, 0xF9, 0x80, 0x00, 0x40, 0xFF, 0xC3, 0xFF, 0xCC,
0x03, 0xB0, 0x06, 0xC0, 0x1B, 0x00, 0x6C, 0x01, 0xB0, 0x0C, 0xFF, 0xE3,
0xFF, 0xCC, 0x03, 0xB0, 0x06, 0xC0, 0x1B, 0x00, 0x6C, 0x01, 0xB0, 0x06,
0xC0, 0x1B, 0x00, 0x70, 0x0F, 0xE0, 0x7F, 0xC3, 0x83, 0x9C, 0x07, 0x60,
0x0D, 0x80, 0x06, 0x00, 0x1E, 0x00, 0x3F, 0x80, 0x3F, 0xC0, 0x0F, 0x80,
0x07, 0xC0, 0x0F, 0x00, 0x3E, 0x00, 0xDE, 0x0E, 0x3F, 0xF0, 0x3F, 0x80,
0xFF, 0xFF, 0xFF, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60,
0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60, 0x06, 0x00, 0x60,
0x06, 0x00, 0x60, 0xC0, 0x1E, 0x00, 0xF0, 0x07, 0x80, 0x3C, 0x01, 0xE0,
0x0F, 0x00, 0x78, 0x03, 0xC0, 0x1E, 0x00, 0xF0, 0x07, 0x80, 0x3C, 0x01,
0xE0, 0x0F, 0x80, 0xEE, 0x0E, 0x3F, 0xE0, 0x7C, 0x00, 0x60, 0x06, 0xC0,
0x1D, 0xC0, 0x31, 0x80, 0x63, 0x01, 0xC7, 0x03, 0x06, 0x06, 0x0C, 0x1C,
0x1C, 0x30, 0x18, 0x60, 0x31, 0xC0, 0x73, 0x00, 0x66, 0x00, 0xDC, 0x01,
0xF0, 0x01, 0xE0, 0x03, 0xC0, 0x07, 0x00, 0xE0, 0x30, 0x1D, 0x80, 0xE0,
0x76, 0x07, 0x81, 0xD8, 0x1E, 0x06, 0x70, 0x7C, 0x18, 0xC1, 0xB0, 0xE3,
0x0C, 0xC3, 0x8C, 0x33, 0x0C, 0x38, 0xC6, 0x30, 0x67, 0x18, 0xC1, 0x98,
0x67, 0x06, 0x61, 0xD8, 0x1D, 0x83, 0x60, 0x3C, 0x0D, 0x80, 0xF0, 0x3E,
0x03, 0xC0, 0x70, 0x0F, 0x01, 0xC0, 0x18, 0x07, 0x00, 0x70, 0x0E, 0x60,
0x38, 0xE0, 0x60, 0xE1, 0xC0, 0xC3, 0x01, 0xCC, 0x01, 0xF8, 0x01, 0xE0,
0x03, 0x80, 0x07, 0x80, 0x1F, 0x00, 0x33, 0x00, 0xE7, 0x03, 0x86, 0x06,
0x0E, 0x1C, 0x0E, 0x70, 0x0C, 0xC0, 0x1C, 0x60, 0x06, 0x70, 0x0E, 0x30,
0x1C, 0x38, 0x18, 0x1C, 0x38, 0x0C, 0x30, 0x0E, 0x70, 0x06, 0x60, 0x03,
0xC0, 0x03, 0xC0, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0x01,
0x80, 0x01, 0x80, 0x01, 0x80, 0x01, 0x80, 0xFF, 0xFF, 0xFF, 0xC0, 0x0E,
0x00, 0xE0, 0x0E, 0x00, 0x60, 0x07, 0x00, 0x70, 0x07, 0x00, 0x30, 0x03,
0x80, 0x38, 0x03, 0x80, 0x18, 0x01, 0xC0, 0x1C, 0x00, 0xFF, 0xFF, 0xFF,
0xC0, 0xFF, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCC, 0xCF,
0xF0, 0x81, 0x81, 0x02, 0x06, 0x04, 0x08, 0x18, 0x10, 0x20, 0x60, 0x40,
0x81, 0x81, 0x02, 0x06, 0x04, 0xFF, 0x33, 0x33, 0x33, 0x33, 0x33, 0x33,
0x33, 0x33, 0x33, 0x3F, 0xF0, 0x0C, 0x0E, 0x05, 0x86, 0xC3, 0x21, 0x19,
0x8C, 0x83, 0xC1, 0x80, 0xFF, 0xFE, 0xE3, 0x8C, 0x30, 0x3F, 0x07, 0xF8,
0xE1, 0xCC, 0x0C, 0x00, 0xC0, 0x1C, 0x3F, 0xCF, 0x8C, 0xC0, 0xCC, 0x0C,
0xE3, 0xC7, 0xEF, 0x3C, 0x70, 0xC0, 0x0C, 0x00, 0xC0, 0x0C, 0x00, 0xC0,
0x0C, 0xF8, 0xDF, 0xCF, 0x0E, 0xE0, 0x7C, 0x03, 0xC0, 0x3C, 0x03, 0xC0,
0x3C, 0x03, 0xE0, 0x6F, 0x0E, 0xDF, 0xCC, 0xF8, 0x1F, 0x0F, 0xE7, 0x1B,
0x83, 0xC0, 0x30, 0x0C, 0x03, 0x00, 0xC0, 0x38, 0x37, 0x1C, 0xFE, 0x1F,
0x00, 0x00, 0x60, 0x0C, 0x01, 0x80, 0x30, 0x06, 0x3C, 0xCF, 0xFB, 0x8F,
0xE0, 0xF8, 0x0F, 0x01, 0xE0, 0x3C, 0x07, 0x80, 0xF8, 0x3B, 0x8F, 0x3F,
0x63, 0xCC, 0x1F, 0x07, 0xF1, 0xC7, 0x70, 0x3C, 0x07, 0xFF, 0xFF, 0xFE,
0x00, 0xC0, 0x1C, 0x0D, 0xC3, 0x1F, 0xE1, 0xF0, 0x3B, 0xD8, 0xC6, 0x7F,
0xEC, 0x63, 0x18, 0xC6, 0x31, 0x8C, 0x63, 0x00, 0x1E, 0x67, 0xFD, 0xC7,
0xF0, 0x7C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x7C, 0x1D, 0xC7, 0x9F,
0xB1, 0xE6, 0x00, 0xC0, 0x3E, 0x0E, 0x7F, 0xC7, 0xE0, 0xC0, 0x30, 0x0C,
0x03, 0x00, 0xC0, 0x33, 0xCD, 0xFB, 0xC7, 0xE0, 0xF0, 0x3C, 0x0F, 0x03,
0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x30, 0xF0, 0x3F, 0xFF, 0xFF,
0xF0, 0x33, 0x00, 0x03, 0x33, 0x33, 0x33, 0x33, 0x33, 0x33, 0x33, 0x3F,
0xE0, 0xC0, 0x18, 0x03, 0x00, 0x60, 0x0C, 0x01, 0x83, 0x30, 0xC6, 0x30,
0xCC, 0x1B, 0x83, 0xF0, 0x77, 0x0C, 0x61, 0x8E, 0x30, 0xE6, 0x0C, 0xC1,
0xD8, 0x18, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0xCF, 0x1F, 0x6F, 0xDF, 0xFC,
0x78, 0xFC, 0x18, 0x3C, 0x0C, 0x1E, 0x06, 0x0F, 0x03, 0x07, 0x81, 0x83,
0xC0, 0xC1, 0xE0, 0x60, 0xF0, 0x30, 0x78, 0x18, 0x3C, 0x0C, 0x18, 0xCF,
0x37, 0xEF, 0x1F, 0x83, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x3C,
0x0F, 0x03, 0xC0, 0xC0, 0x1F, 0x07, 0xF1, 0xC7, 0x70, 0x7C, 0x07, 0x80,
0xF0, 0x1E, 0x03, 0xC0, 0x7C, 0x1D, 0xC7, 0x1F, 0xC1, 0xF0, 0xCF, 0x8D,
0xFC, 0xF0, 0xEE, 0x06, 0xC0, 0x3C, 0x03, 0xC0, 0x3C, 0x03, 0xC0, 0x3E,
0x07, 0xF0, 0xEF, 0xFC, 0xCF, 0x8C, 0x00, 0xC0, 0x0C, 0x00, 0xC0, 0x00,
0x1E, 0x67, 0xFD, 0xC7, 0xF0, 0x7C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0,
0x7C, 0x1D, 0xC7, 0x9F, 0xF1, 0xE6, 0x00, 0xC0, 0x18, 0x03, 0x00, 0x60,
0xCF, 0x7F, 0x38, 0xC3, 0x0C, 0x30, 0xC3, 0x0C, 0x30, 0xC0, 0x3E, 0x1F,
0xEE, 0x1B, 0x00, 0xC0, 0x3C, 0x07, 0xF0, 0x3E, 0x01, 0xF0, 0x3E, 0x1D,
0xFE, 0x3E, 0x00, 0x63, 0x19, 0xFF, 0xB1, 0x8C, 0x63, 0x18, 0xC6, 0x31,
0xE7, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0, 0xF0, 0x3C, 0x0F, 0x03, 0xC0,
0xF0, 0x7E, 0x3D, 0xFB, 0x3C, 0xC0, 0xE0, 0x66, 0x06, 0x60, 0x67, 0x0C,
0x30, 0xC3, 0x0C, 0x39, 0x81, 0x98, 0x19, 0x81, 0xF0, 0x0F, 0x00, 0xE0,
0x0E, 0x00, 0xC1, 0xC1, 0xB0, 0xE1, 0xD8, 0x70, 0xCC, 0x2C, 0x66, 0x36,
0x31, 0x9B, 0x18, 0xCD, 0x98, 0x64, 0x6C, 0x16, 0x36, 0x0F, 0x1A, 0x07,
0x8F, 0x03, 0x83, 0x80, 0xC1, 0xC0, 0x60, 0xEE, 0x18, 0xC6, 0x0C, 0xC1,
0xF0, 0x1C, 0x01, 0x80, 0x78, 0x1B, 0x03, 0x30, 0xC7, 0x30, 0x66, 0x06,
0xE0, 0x6C, 0x0D, 0x83, 0x38, 0x63, 0x0C, 0x63, 0x0E, 0x60, 0xCC, 0x1B,
0x03, 0x60, 0x3C, 0x07, 0x00, 0xE0, 0x18, 0x03, 0x00, 0xE0, 0x78, 0x0E,
0x00, 0xFF, 0xFF, 0xF0, 0x18, 0x0C, 0x07, 0x03, 0x81, 0xC0, 0x60, 0x30,
0x18, 0x0E, 0x03, 0xFF, 0xFF, 0xC0, 0x19, 0xCC, 0x63, 0x18, 0xC6, 0x31,
0x99, 0x86, 0x18, 0xC6, 0x31, 0x8C, 0x63, 0x1C, 0x60, 0xFF, 0xFF, 0xFF,
0xFF, 0xFF, 0xFC, 0xC7, 0x18, 0xC6, 0x31, 0x8C, 0x63, 0x0C, 0x33, 0x31,
0x8C, 0x63, 0x18, 0xC6, 0x73, 0x00, 0x70, 0x3E, 0x09, 0xE4, 0x1F, 0x03,
0x80 };
const GFXglyph FreeSans12pt7bGlyphs[] PROGMEM = {
{ 0, 0, 0, 6, 0, 1 }, // 0x20 ' '
{ 0, 2, 18, 8, 3, -17 }, // 0x21 '!'
{ 5, 6, 6, 8, 1, -16 }, // 0x22 '"'
{ 10, 13, 16, 13, 0, -15 }, // 0x23 '#'
{ 36, 11, 20, 13, 1, -17 }, // 0x24 '$'
{ 64, 20, 17, 21, 1, -16 }, // 0x25 '%'
{ 107, 14, 17, 16, 1, -16 }, // 0x26 '&'
{ 137, 2, 6, 5, 1, -16 }, // 0x27 '''
{ 139, 5, 23, 8, 2, -17 }, // 0x28 '('
{ 154, 5, 23, 8, 1, -17 }, // 0x29 ')'
{ 169, 7, 7, 9, 1, -17 }, // 0x2A '*'
{ 176, 10, 11, 14, 2, -10 }, // 0x2B '+'
{ 190, 2, 6, 7, 2, -1 }, // 0x2C ','
{ 192, 6, 2, 8, 1, -7 }, // 0x2D '-'
{ 194, 2, 2, 6, 2, -1 }, // 0x2E '.'
{ 195, 7, 18, 7, 0, -17 }, // 0x2F '/'
{ 211, 11, 17, 13, 1, -16 }, // 0x30 '0'
{ 235, 5, 17, 13, 3, -16 }, // 0x31 '1'
{ 246, 11, 17, 13, 1, -16 }, // 0x32 '2'
{ 270, 11, 17, 13, 1, -16 }, // 0x33 '3'
{ 294, 11, 17, 13, 1, -16 }, // 0x34 '4'
{ 318, 11, 17, 13, 1, -16 }, // 0x35 '5'
{ 342, 11, 17, 13, 1, -16 }, // 0x36 '6'
{ 366, 11, 17, 13, 1, -16 }, // 0x37 '7'
{ 390, 11, 17, 13, 1, -16 }, // 0x38 '8'
{ 414, 11, 17, 13, 1, -16 }, // 0x39 '9'
{ 438, 2, 13, 6, 2, -12 }, // 0x3A ':'
{ 442, 2, 16, 6, 2, -11 }, // 0x3B ';'
{ 446, 12, 12, 14, 1, -11 }, // 0x3C '<'
{ 464, 12, 6, 14, 1, -8 }, // 0x3D '='
{ 473, 12, 12, 14, 1, -11 }, // 0x3E '>'
{ 491, 10, 18, 13, 2, -17 }, // 0x3F '?'
{ 514, 22, 21, 24, 1, -17 }, // 0x40 '@'
{ 572, 16, 18, 16, 0, -17 }, // 0x41 'A'
{ 608, 13, 18, 16, 2, -17 }, // 0x42 'B'
{ 638, 15, 18, 17, 1, -17 }, // 0x43 'C'
{ 672, 14, 18, 17, 2, -17 }, // 0x44 'D'
{ 704, 12, 18, 15, 2, -17 }, // 0x45 'E'
{ 731, 11, 18, 14, 2, -17 }, // 0x46 'F'
{ 756, 16, 18, 18, 1, -17 }, // 0x47 'G'
{ 792, 13, 18, 17, 2, -17 }, // 0x48 'H'
{ 822, 2, 18, 7, 2, -17 }, // 0x49 'I'
{ 827, 9, 18, 13, 1, -17 }, // 0x4A 'J'
{ 848, 14, 18, 16, 2, -17 }, // 0x4B 'K'
{ 880, 10, 18, 14, 2, -17 }, // 0x4C 'L'
{ 903, 16, 18, 20, 2, -17 }, // 0x4D 'M'
{ 939, 13, 18, 18, 2, -17 }, // 0x4E 'N'
{ 969, 17, 18, 19, 1, -17 }, // 0x4F 'O'
{ 1008, 12, 18, 16, 2, -17 }, // 0x50 'P'
{ 1035, 17, 19, 19, 1, -17 }, // 0x51 'Q'
{ 1076, 14, 18, 17, 2, -17 }, // 0x52 'R'
{ 1108, 14, 18, 16, 1, -17 }, // 0x53 'S'
{ 1140, 12, 18, 15, 1, -17 }, // 0x54 'T'
{ 1167, 13, 18, 17, 2, -17 }, // 0x55 'U'
{ 1197, 15, 18, 15, 0, -17 }, // 0x56 'V'
{ 1231, 22, 18, 22, 0, -17 }, // 0x57 'W'
{ 1281, 15, 18, 16, 0, -17 }, // 0x58 'X'
{ 1315, 16, 18, 16, 0, -17 }, // 0x59 'Y'
{ 1351, 13, 18, 15, 1, -17 }, // 0x5A 'Z'
{ 1381, 4, 23, 7, 2, -17 }, // 0x5B '['
{ 1393, 7, 18, 7, 0, -17 }, // 0x5C '\'
{ 1409, 4, 23, 7, 1, -17 }, // 0x5D ']'
{ 1421, 9, 9, 11, 1, -16 }, // 0x5E '^'
{ 1432, 15, 1, 13, -1, 4 }, // 0x5F '_'
{ 1434, 5, 4, 6, 1, -17 }, // 0x60 '`'
{ 1437, 12, 13, 13, 1, -12 }, // 0x61 'a'
{ 1457, 12, 18, 13, 1, -17 }, // 0x62 'b'
{ 1484, 10, 13, 12, 1, -12 }, // 0x63 'c'
{ 1501, 11, 18, 13, 1, -17 }, // 0x64 'd'
{ 1526, 11, 13, 13, 1, -12 }, // 0x65 'e'
{ 1544, 5, 18, 7, 1, -17 }, // 0x66 'f'
{ 1556, 11, 18, 13, 1, -12 }, // 0x67 'g'
{ 1581, 10, 18, 13, 1, -17 }, // 0x68 'h'
{ 1604, 2, 18, 5, 2, -17 }, // 0x69 'i'
{ 1609, 4, 23, 6, 0, -17 }, // 0x6A 'j'
{ 1621, 11, 18, 12, 1, -17 }, // 0x6B 'k'
{ 1646, 2, 18, 5, 1, -17 }, // 0x6C 'l'
{ 1651, 17, 13, 19, 1, -12 }, // 0x6D 'm'
{ 1679, 10, 13, 13, 1, -12 }, // 0x6E 'n'
{ 1696, 11, 13, 13, 1, -12 }, // 0x6F 'o'
{ 1714, 12, 17, 13, 1, -12 }, // 0x70 'p'
{ 1740, 11, 17, 13, 1, -12 }, // 0x71 'q'
{ 1764, 6, 13, 8, 1, -12 }, // 0x72 'r'
{ 1774, 10, 13, 12, 1, -12 }, // 0x73 's'
{ 1791, 5, 16, 7, 1, -15 }, // 0x74 't'
{ 1801, 10, 13, 13, 1, -12 }, // 0x75 'u'
{ 1818, 12, 13, 12, 0, -12 }, // 0x76 'v'
{ 1838, 17, 13, 17, 0, -12 }, // 0x77 'w'
{ 1866, 11, 13, 11, 0, -12 }, // 0x78 'x'
{ 1884, 11, 18, 11, 0, -12 }, // 0x79 'y'
{ 1909, 10, 13, 12, 1, -12 }, // 0x7A 'z'
{ 1926, 5, 23, 8, 1, -17 }, // 0x7B '{'
{ 1941, 2, 23, 6, 2, -17 }, // 0x7C '|'
{ 1947, 5, 23, 8, 2, -17 }, // 0x7D '}'
{ 1962, 10, 5, 12, 1, -10 } }; // 0x7E '~'
const GFXfont FreeSans12pt7b PROGMEM = {
(uint8_t *)FreeSans12pt7bBitmaps,
(GFXglyph *)FreeSans12pt7bGlyphs,
0x20, 0x7E, 29 };
// Approx. 2641 bytes
+201
View File
@@ -0,0 +1,201 @@
const uint8_t FreeSans9pt7bBitmaps[] PROGMEM = {
0xFF, 0xFF, 0xF8, 0xC0, 0xDE, 0xF7, 0x20, 0x09, 0x86, 0x41, 0x91, 0xFF,
0x13, 0x04, 0xC3, 0x20, 0xC8, 0xFF, 0x89, 0x82, 0x61, 0x90, 0x10, 0x1F,
0x14, 0xDA, 0x3D, 0x1E, 0x83, 0x40, 0x78, 0x17, 0x08, 0xF4, 0x7A, 0x35,
0x33, 0xF0, 0x40, 0x20, 0x38, 0x10, 0xEC, 0x20, 0xC6, 0x20, 0xC6, 0x40,
0xC6, 0x40, 0x6C, 0x80, 0x39, 0x00, 0x01, 0x3C, 0x02, 0x77, 0x02, 0x63,
0x04, 0x63, 0x04, 0x77, 0x08, 0x3C, 0x0E, 0x06, 0x60, 0xCC, 0x19, 0x81,
0xE0, 0x18, 0x0F, 0x03, 0x36, 0xC2, 0xD8, 0x73, 0x06, 0x31, 0xE3, 0xC4,
0xFE, 0x13, 0x26, 0x6C, 0xCC, 0xCC, 0xC4, 0x66, 0x23, 0x10, 0x8C, 0x46,
0x63, 0x33, 0x33, 0x32, 0x66, 0x4C, 0x80, 0x25, 0x7E, 0xA5, 0x00, 0x30,
0xC3, 0x3F, 0x30, 0xC3, 0x0C, 0xD6, 0xF0, 0xC0, 0x08, 0x44, 0x21, 0x10,
0x84, 0x42, 0x11, 0x08, 0x00, 0x3C, 0x66, 0x42, 0xC3, 0xC3, 0xC3, 0xC3,
0xC3, 0xC3, 0xC3, 0x42, 0x66, 0x3C, 0x11, 0x3F, 0x33, 0x33, 0x33, 0x33,
0x30, 0x3E, 0x31, 0xB0, 0x78, 0x30, 0x18, 0x1C, 0x1C, 0x1C, 0x18, 0x18,
0x10, 0x08, 0x07, 0xF8, 0x3C, 0x66, 0xC3, 0xC3, 0x03, 0x06, 0x1C, 0x07,
0x03, 0xC3, 0xC3, 0x66, 0x3C, 0x0C, 0x18, 0x71, 0x62, 0xC9, 0xA3, 0x46,
0xFE, 0x18, 0x30, 0x60, 0xC0, 0x7F, 0x20, 0x10, 0x08, 0x08, 0x07, 0xF3,
0x8C, 0x03, 0x01, 0x80, 0xF0, 0x6C, 0x63, 0xE0, 0x1E, 0x31, 0x98, 0x78,
0x0C, 0x06, 0xF3, 0x8D, 0x83, 0xC1, 0xE0, 0xD0, 0x6C, 0x63, 0xE0, 0xFF,
0x03, 0x02, 0x06, 0x04, 0x0C, 0x08, 0x18, 0x18, 0x18, 0x10, 0x30, 0x30,
0x3E, 0x31, 0xB0, 0x78, 0x3C, 0x1B, 0x18, 0xF8, 0xC6, 0xC1, 0xE0, 0xF0,
0x6C, 0x63, 0xE0, 0x3C, 0x66, 0xC2, 0xC3, 0xC3, 0xC3, 0x67, 0x3B, 0x03,
0x03, 0xC2, 0x66, 0x3C, 0xC0, 0x00, 0x30, 0xC0, 0x00, 0x00, 0x64, 0xA0,
0x00, 0x81, 0xC7, 0x8E, 0x0C, 0x07, 0x80, 0x70, 0x0E, 0x01, 0x80, 0xFF,
0x80, 0x00, 0x1F, 0xF0, 0x00, 0x70, 0x0E, 0x01, 0xC0, 0x18, 0x38, 0x71,
0xC0, 0x80, 0x00, 0x3E, 0x31, 0xB0, 0x78, 0x30, 0x18, 0x18, 0x38, 0x18,
0x18, 0x0C, 0x00, 0x00, 0x01, 0x80, 0x03, 0xF0, 0x06, 0x0E, 0x06, 0x01,
0x86, 0x00, 0x66, 0x1D, 0xBB, 0x31, 0xCF, 0x18, 0xC7, 0x98, 0x63, 0xCC,
0x31, 0xE6, 0x11, 0xB3, 0x99, 0xCC, 0xF7, 0x86, 0x00, 0x01, 0x80, 0x00,
0x70, 0x40, 0x0F, 0xE0, 0x06, 0x00, 0xF0, 0x0F, 0x00, 0x90, 0x19, 0x81,
0x98, 0x10, 0x83, 0x0C, 0x3F, 0xC2, 0x04, 0x60, 0x66, 0x06, 0xC0, 0x30,
0xFF, 0x18, 0x33, 0x03, 0x60, 0x6C, 0x0D, 0x83, 0x3F, 0xC6, 0x06, 0xC0,
0x78, 0x0F, 0x01, 0xE0, 0x6F, 0xF8, 0x1F, 0x86, 0x19, 0x81, 0xA0, 0x3C,
0x01, 0x80, 0x30, 0x06, 0x00, 0xC0, 0x68, 0x0D, 0x83, 0x18, 0x61, 0xF0,
0xFF, 0x18, 0x33, 0x03, 0x60, 0x3C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0,
0x78, 0x0F, 0x03, 0x60, 0xCF, 0xF0, 0xFF, 0xE0, 0x30, 0x18, 0x0C, 0x06,
0x03, 0xFD, 0x80, 0xC0, 0x60, 0x30, 0x18, 0x0F, 0xF8, 0xFF, 0xC0, 0xC0,
0xC0, 0xC0, 0xC0, 0xFE, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0x0F, 0x83,
0x0E, 0x60, 0x66, 0x03, 0xC0, 0x0C, 0x00, 0xC1, 0xFC, 0x03, 0xC0, 0x36,
0x03, 0x60, 0x73, 0x0F, 0x0F, 0x10, 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3C,
0x07, 0x80, 0xFF, 0xFE, 0x03, 0xC0, 0x78, 0x0F, 0x01, 0xE0, 0x3C, 0x06,
0xFF, 0xFF, 0xFF, 0xC0, 0x06, 0x0C, 0x18, 0x30, 0x60, 0xC1, 0x83, 0x07,
0x8F, 0x1E, 0x27, 0x80, 0xC0, 0xD8, 0x33, 0x0C, 0x63, 0x0C, 0xC1, 0xB8,
0x3F, 0x07, 0x30, 0xC3, 0x18, 0x63, 0x06, 0x60, 0x6C, 0x0C, 0xC0, 0xC0,
0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xC0, 0xFF, 0xE0,
0x3F, 0x01, 0xFC, 0x1F, 0xE0, 0xFD, 0x05, 0xEC, 0x6F, 0x63, 0x79, 0x13,
0xCD, 0x9E, 0x6C, 0xF1, 0x47, 0x8E, 0x3C, 0x71, 0x80, 0xE0, 0x7C, 0x0F,
0xC1, 0xE8, 0x3D, 0x87, 0x98, 0xF1, 0x1E, 0x33, 0xC3, 0x78, 0x6F, 0x07,
0xE0, 0x7C, 0x0E, 0x0F, 0x81, 0x83, 0x18, 0x0C, 0xC0, 0x6C, 0x01, 0xE0,
0x0F, 0x00, 0x78, 0x03, 0xC0, 0x1B, 0x01, 0x98, 0x0C, 0x60, 0xC0, 0xF8,
0x00, 0xFF, 0x30, 0x6C, 0x0F, 0x03, 0xC0, 0xF0, 0x6F, 0xF3, 0x00, 0xC0,
0x30, 0x0C, 0x03, 0x00, 0xC0, 0x00, 0x0F, 0x81, 0x83, 0x18, 0x0C, 0xC0,
0x6C, 0x01, 0xE0, 0x0F, 0x00, 0x78, 0x03, 0xC0, 0x1B, 0x01, 0x98, 0x6C,
0x60, 0xC0, 0xFB, 0x00, 0x08, 0xFF, 0x8C, 0x0E, 0xC0, 0x6C, 0x06, 0xC0,
0x6C, 0x0C, 0xFF, 0x8C, 0x0E, 0xC0, 0x6C, 0x06, 0xC0, 0x6C, 0x06, 0xC0,
0x70, 0x3F, 0x18, 0x6C, 0x0F, 0x03, 0xC0, 0x1E, 0x01, 0xF0, 0x0E, 0x00,
0xF0, 0x3C, 0x0D, 0x86, 0x3F, 0x00, 0xFF, 0x86, 0x03, 0x01, 0x80, 0xC0,
0x60, 0x30, 0x18, 0x0C, 0x06, 0x03, 0x01, 0x80, 0xC0, 0xC0, 0x78, 0x0F,
0x01, 0xE0, 0x3C, 0x07, 0x80, 0xF0, 0x1E, 0x03, 0xC0, 0x78, 0x0F, 0x01,
0xB0, 0x61, 0xF0, 0xC0, 0x6C, 0x0D, 0x81, 0x10, 0x63, 0x0C, 0x61, 0x04,
0x60, 0xCC, 0x19, 0x01, 0x60, 0x3C, 0x07, 0x00, 0x60, 0xC1, 0x81, 0x30,
0xE1, 0x98, 0x70, 0xCC, 0x28, 0x66, 0x26, 0x21, 0x13, 0x30, 0xC8, 0x98,
0x6C, 0x4C, 0x14, 0x34, 0x0A, 0x1A, 0x07, 0x07, 0x03, 0x03, 0x80, 0x81,
0x80, 0x60, 0x63, 0x0C, 0x30, 0xC1, 0x98, 0x0F, 0x00, 0xE0, 0x06, 0x00,
0xF0, 0x19, 0x01, 0x98, 0x30, 0xC6, 0x0E, 0x60, 0x60, 0xC0, 0x36, 0x06,
0x30, 0xC3, 0x0C, 0x19, 0x81, 0xD8, 0x0F, 0x00, 0x60, 0x06, 0x00, 0x60,
0x06, 0x00, 0x60, 0x06, 0x00, 0xFF, 0xC0, 0x60, 0x30, 0x0C, 0x06, 0x03,
0x01, 0xC0, 0x60, 0x30, 0x18, 0x06, 0x03, 0x00, 0xFF, 0xC0, 0xFB, 0x6D,
0xB6, 0xDB, 0x6D, 0xB6, 0xE0, 0x84, 0x10, 0x84, 0x10, 0x84, 0x10, 0x84,
0x10, 0x80, 0xED, 0xB6, 0xDB, 0x6D, 0xB6, 0xDB, 0xE0, 0x30, 0x60, 0xA2,
0x44, 0xD8, 0xA1, 0x80, 0xFF, 0xC0, 0xC6, 0x30, 0x7E, 0x71, 0xB0, 0xC0,
0x60, 0xF3, 0xDB, 0x0D, 0x86, 0xC7, 0x3D, 0xC0, 0xC0, 0x60, 0x30, 0x1B,
0xCE, 0x36, 0x0F, 0x07, 0x83, 0xC1, 0xE0, 0xF0, 0x7C, 0x6D, 0xE0, 0x3C,
0x66, 0xC3, 0xC0, 0xC0, 0xC0, 0xC0, 0xC3, 0x66, 0x3C, 0x03, 0x03, 0x03,
0x3B, 0x67, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0x67, 0x3B, 0x3C, 0x66,
0xC3, 0xC3, 0xFF, 0xC0, 0xC0, 0xC3, 0x66, 0x3C, 0x36, 0x6F, 0x66, 0x66,
0x66, 0x66, 0x60, 0x3B, 0x67, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0x67,
0x3B, 0x03, 0x03, 0xC6, 0x7C, 0xC0, 0xC0, 0xC0, 0xDE, 0xE3, 0xC3, 0xC3,
0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xFF, 0xFF, 0xC0, 0x30, 0x03,
0x33, 0x33, 0x33, 0x33, 0x33, 0x33, 0xE0, 0xC0, 0x60, 0x30, 0x18, 0x4C,
0x46, 0x63, 0x61, 0xF0, 0xEC, 0x62, 0x31, 0x98, 0x6C, 0x30, 0xFF, 0xFF,
0xFF, 0xC0, 0xDE, 0xF7, 0x1C, 0xF0, 0xC7, 0x86, 0x3C, 0x31, 0xE1, 0x8F,
0x0C, 0x78, 0x63, 0xC3, 0x1E, 0x18, 0xC0, 0xDE, 0xE3, 0xC3, 0xC3, 0xC3,
0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0x3C, 0x66, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
0xC3, 0x66, 0x3C, 0xDE, 0x71, 0xB0, 0x78, 0x3C, 0x1E, 0x0F, 0x07, 0x83,
0xE3, 0x6F, 0x30, 0x18, 0x0C, 0x00, 0x3B, 0x67, 0xC3, 0xC3, 0xC3, 0xC3,
0xC3, 0xC3, 0x67, 0x3B, 0x03, 0x03, 0x03, 0xDF, 0x31, 0x8C, 0x63, 0x18,
0xC6, 0x00, 0x3E, 0xE3, 0xC0, 0xC0, 0xE0, 0x3C, 0x07, 0xC3, 0xE3, 0x7E,
0x66, 0xF6, 0x66, 0x66, 0x66, 0x67, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3, 0xC3,
0xC3, 0xC3, 0xC7, 0x7B, 0xC1, 0xA0, 0x98, 0xCC, 0x42, 0x21, 0xB0, 0xD0,
0x28, 0x1C, 0x0C, 0x00, 0xC6, 0x1E, 0x38, 0x91, 0xC4, 0xCA, 0x66, 0xD3,
0x16, 0xD0, 0xA6, 0x87, 0x1C, 0x38, 0xC0, 0xC6, 0x00, 0x43, 0x62, 0x36,
0x1C, 0x18, 0x1C, 0x3C, 0x26, 0x62, 0x43, 0xC1, 0x21, 0x98, 0xCC, 0x42,
0x61, 0xB0, 0xD0, 0x38, 0x1C, 0x0C, 0x06, 0x03, 0x01, 0x03, 0x00, 0xFE,
0x0C, 0x30, 0xC1, 0x86, 0x18, 0x20, 0xC1, 0xFC, 0x36, 0x66, 0x66, 0x6E,
0xCE, 0x66, 0x66, 0x66, 0x30, 0xFF, 0xFF, 0xFF, 0xFF, 0xC0, 0xC6, 0x66,
0x66, 0x67, 0x37, 0x66, 0x66, 0x66, 0xC0, 0x61, 0x24, 0x38 };
const GFXglyph FreeSans9pt7bGlyphs[] PROGMEM = {
{ 0, 0, 0, 5, 0, 1 }, // 0x20 ' '
{ 0, 2, 13, 6, 2, -12 }, // 0x21 '!'
{ 4, 5, 4, 6, 1, -12 }, // 0x22 '"'
{ 7, 10, 12, 10, 0, -11 }, // 0x23 '#'
{ 22, 9, 16, 10, 1, -13 }, // 0x24 '$'
{ 40, 16, 13, 16, 1, -12 }, // 0x25 '%'
{ 66, 11, 13, 12, 1, -12 }, // 0x26 '&'
{ 84, 2, 4, 4, 1, -12 }, // 0x27 '''
{ 85, 4, 17, 6, 1, -12 }, // 0x28 '('
{ 94, 4, 17, 6, 1, -12 }, // 0x29 ')'
{ 103, 5, 5, 7, 1, -12 }, // 0x2A '*'
{ 107, 6, 8, 11, 3, -7 }, // 0x2B '+'
{ 113, 2, 4, 5, 2, 0 }, // 0x2C ','
{ 114, 4, 1, 6, 1, -4 }, // 0x2D '-'
{ 115, 2, 1, 5, 1, 0 }, // 0x2E '.'
{ 116, 5, 13, 5, 0, -12 }, // 0x2F '/'
{ 125, 8, 13, 10, 1, -12 }, // 0x30 '0'
{ 138, 4, 13, 10, 3, -12 }, // 0x31 '1'
{ 145, 9, 13, 10, 1, -12 }, // 0x32 '2'
{ 160, 8, 13, 10, 1, -12 }, // 0x33 '3'
{ 173, 7, 13, 10, 2, -12 }, // 0x34 '4'
{ 185, 9, 13, 10, 1, -12 }, // 0x35 '5'
{ 200, 9, 13, 10, 1, -12 }, // 0x36 '6'
{ 215, 8, 13, 10, 0, -12 }, // 0x37 '7'
{ 228, 9, 13, 10, 1, -12 }, // 0x38 '8'
{ 243, 8, 13, 10, 1, -12 }, // 0x39 '9'
{ 256, 2, 10, 5, 1, -9 }, // 0x3A ':'
{ 259, 3, 12, 5, 1, -8 }, // 0x3B ';'
{ 264, 9, 9, 11, 1, -8 }, // 0x3C '<'
{ 275, 9, 4, 11, 1, -5 }, // 0x3D '='
{ 280, 9, 9, 11, 1, -8 }, // 0x3E '>'
{ 291, 9, 13, 10, 1, -12 }, // 0x3F '?'
{ 306, 17, 16, 18, 1, -12 }, // 0x40 '@'
{ 340, 12, 13, 12, 0, -12 }, // 0x41 'A'
{ 360, 11, 13, 12, 1, -12 }, // 0x42 'B'
{ 378, 11, 13, 13, 1, -12 }, // 0x43 'C'
{ 396, 11, 13, 13, 1, -12 }, // 0x44 'D'
{ 414, 9, 13, 11, 1, -12 }, // 0x45 'E'
{ 429, 8, 13, 11, 1, -12 }, // 0x46 'F'
{ 442, 12, 13, 14, 1, -12 }, // 0x47 'G'
{ 462, 11, 13, 13, 1, -12 }, // 0x48 'H'
{ 480, 2, 13, 5, 2, -12 }, // 0x49 'I'
{ 484, 7, 13, 10, 1, -12 }, // 0x4A 'J'
{ 496, 11, 13, 12, 1, -12 }, // 0x4B 'K'
{ 514, 8, 13, 10, 1, -12 }, // 0x4C 'L'
{ 527, 13, 13, 15, 1, -12 }, // 0x4D 'M'
{ 549, 11, 13, 13, 1, -12 }, // 0x4E 'N'
{ 567, 13, 13, 14, 1, -12 }, // 0x4F 'O'
{ 589, 10, 13, 12, 1, -12 }, // 0x50 'P'
{ 606, 13, 14, 14, 1, -12 }, // 0x51 'Q'
{ 629, 12, 13, 13, 1, -12 }, // 0x52 'R'
{ 649, 10, 13, 12, 1, -12 }, // 0x53 'S'
{ 666, 9, 13, 11, 1, -12 }, // 0x54 'T'
{ 681, 11, 13, 13, 1, -12 }, // 0x55 'U'
{ 699, 11, 13, 12, 0, -12 }, // 0x56 'V'
{ 717, 17, 13, 17, 0, -12 }, // 0x57 'W'
{ 745, 12, 13, 12, 0, -12 }, // 0x58 'X'
{ 765, 12, 13, 12, 0, -12 }, // 0x59 'Y'
{ 785, 10, 13, 11, 1, -12 }, // 0x5A 'Z'
{ 802, 3, 17, 5, 1, -12 }, // 0x5B '['
{ 809, 5, 13, 5, 0, -12 }, // 0x5C '\'
{ 818, 3, 17, 5, 0, -12 }, // 0x5D ']'
{ 825, 7, 7, 8, 1, -12 }, // 0x5E '^'
{ 832, 10, 1, 10, 0, 3 }, // 0x5F '_'
{ 834, 4, 3, 5, 0, -12 }, // 0x60 '`'
{ 836, 9, 10, 10, 1, -9 }, // 0x61 'a'
{ 848, 9, 13, 10, 1, -12 }, // 0x62 'b'
{ 863, 8, 10, 9, 1, -9 }, // 0x63 'c'
{ 873, 8, 13, 10, 1, -12 }, // 0x64 'd'
{ 886, 8, 10, 10, 1, -9 }, // 0x65 'e'
{ 896, 4, 13, 5, 1, -12 }, // 0x66 'f'
{ 903, 8, 14, 10, 1, -9 }, // 0x67 'g'
{ 917, 8, 13, 10, 1, -12 }, // 0x68 'h'
{ 930, 2, 13, 4, 1, -12 }, // 0x69 'i'
{ 934, 4, 17, 4, 0, -12 }, // 0x6A 'j'
{ 943, 9, 13, 9, 1, -12 }, // 0x6B 'k'
{ 958, 2, 13, 4, 1, -12 }, // 0x6C 'l'
{ 962, 13, 10, 15, 1, -9 }, // 0x6D 'm'
{ 979, 8, 10, 10, 1, -9 }, // 0x6E 'n'
{ 989, 8, 10, 10, 1, -9 }, // 0x6F 'o'
{ 999, 9, 13, 10, 1, -9 }, // 0x70 'p'
{ 1014, 8, 13, 10, 1, -9 }, // 0x71 'q'
{ 1027, 5, 10, 6, 1, -9 }, // 0x72 'r'
{ 1034, 8, 10, 9, 1, -9 }, // 0x73 's'
{ 1044, 4, 12, 5, 1, -11 }, // 0x74 't'
{ 1050, 8, 10, 10, 1, -9 }, // 0x75 'u'
{ 1060, 9, 10, 9, 0, -9 }, // 0x76 'v'
{ 1072, 13, 10, 13, 0, -9 }, // 0x77 'w'
{ 1089, 8, 10, 9, 0, -9 }, // 0x78 'x'
{ 1099, 9, 14, 9, 0, -9 }, // 0x79 'y'
{ 1115, 7, 10, 9, 1, -9 }, // 0x7A 'z'
{ 1124, 4, 17, 6, 1, -12 }, // 0x7B '{'
{ 1133, 2, 17, 4, 2, -12 }, // 0x7C '|'
{ 1138, 4, 17, 6, 1, -12 }, // 0x7D '}'
{ 1147, 7, 3, 9, 1, -7 } }; // 0x7E '~'
const GFXfont FreeSans9pt7b PROGMEM = {
(uint8_t *)FreeSans9pt7bBitmaps,
(GFXglyph *)FreeSans9pt7bGlyphs,
0x20, 0x7E, 22 };
// Approx. 1822 bytes
+123
View File
@@ -0,0 +1,123 @@
// Picopixel by Sebastian Weber. A tiny font
// with all characters within a 6 pixel height.
const uint8_t PicopixelBitmaps[] PROGMEM = {
0xE8, 0xB4, 0x57, 0xD5, 0xF5, 0x00, 0x4E, 0x3E, 0x80, 0xA5, 0x4A, 0x4A,
0x5A, 0x50, 0xC0, 0x6A, 0x40, 0x95, 0x80, 0xAA, 0x80, 0x5D, 0x00, 0x60,
0xE0, 0x80, 0x25, 0x48, 0x56, 0xD4, 0x75, 0x40, 0xC5, 0x4E, 0xC5, 0x1C,
0x97, 0x92, 0xF3, 0x1C, 0x53, 0x54, 0xE5, 0x48, 0x55, 0x54, 0x55, 0x94,
0xA0, 0x46, 0x64, 0xE3, 0x80, 0x98, 0xC5, 0x04, 0x56, 0xC6, 0x57, 0xDA,
0xD7, 0x5C, 0x72, 0x46, 0xD6, 0xDC, 0xF3, 0xCE, 0xF3, 0x48, 0x72, 0xD4,
0xB7, 0xDA, 0xF8, 0x24, 0xD4, 0xBB, 0x5A, 0x92, 0x4E, 0x8E, 0xEB, 0x58,
0x80, 0x9D, 0xB9, 0x90, 0x56, 0xD4, 0xD7, 0x48, 0x56, 0xD4, 0x40, 0xD7,
0x5A, 0x71, 0x1C, 0xE9, 0x24, 0xB6, 0xD4, 0xB6, 0xA4, 0x8C, 0x6B, 0x55,
0x00, 0xB5, 0x5A, 0xB5, 0x24, 0xE5, 0x4E, 0xEA, 0xC0, 0x91, 0x12, 0xD5,
0xC0, 0x54, 0xF0, 0x90, 0xC7, 0xF0, 0x93, 0x5E, 0x71, 0x80, 0x25, 0xDE,
0x5E, 0x30, 0x6E, 0x80, 0x77, 0x9C, 0x93, 0x5A, 0xB8, 0x45, 0x60, 0x92,
0xEA, 0xAA, 0x40, 0xD5, 0x6A, 0xD6, 0x80, 0x55, 0x00, 0xD7, 0x40, 0x75,
0x90, 0xE8, 0x71, 0xE0, 0xBA, 0x40, 0xB5, 0x80, 0xB5, 0x00, 0x8D, 0x54,
0xAA, 0x80, 0xAC, 0xE0, 0xE5, 0x70, 0x6A, 0x26, 0xFC, 0xC8, 0xAC, 0x5A };
const GFXglyph PicopixelGlyphs[] PROGMEM = {
{ 0, 0, 0, 2, 0, 1 }, // 0x20 ' '
{ 0, 1, 5, 2, 0, -4 }, // 0x21 '!'
{ 1, 3, 2, 4, 0, -4 }, // 0x22 '"'
{ 2, 5, 5, 6, 0, -4 }, // 0x23 '#'
{ 6, 3, 6, 4, 0, -4 }, // 0x24 '$'
{ 9, 3, 5, 4, 0, -4 }, // 0x25 '%'
{ 11, 4, 5, 5, 0, -4 }, // 0x26 '&'
{ 14, 1, 2, 2, 0, -4 }, // 0x27 '''
{ 15, 2, 5, 3, 0, -4 }, // 0x28 '('
{ 17, 2, 5, 3, 0, -4 }, // 0x29 ')'
{ 19, 3, 3, 4, 0, -3 }, // 0x2A '*'
{ 21, 3, 3, 4, 0, -3 }, // 0x2B '+'
{ 23, 2, 2, 3, 0, 0 }, // 0x2C ','
{ 24, 3, 1, 4, 0, -2 }, // 0x2D '-'
{ 25, 1, 1, 2, 0, 0 }, // 0x2E '.'
{ 26, 3, 5, 4, 0, -4 }, // 0x2F '/'
{ 28, 3, 5, 4, 0, -4 }, // 0x30 '0'
{ 30, 2, 5, 3, 0, -4 }, // 0x31 '1'
{ 32, 3, 5, 4, 0, -4 }, // 0x32 '2'
{ 34, 3, 5, 4, 0, -4 }, // 0x33 '3'
{ 36, 3, 5, 4, 0, -4 }, // 0x34 '4'
{ 38, 3, 5, 4, 0, -4 }, // 0x35 '5'
{ 40, 3, 5, 4, 0, -4 }, // 0x36 '6'
{ 42, 3, 5, 4, 0, -4 }, // 0x37 '7'
{ 44, 3, 5, 4, 0, -4 }, // 0x38 '8'
{ 46, 3, 5, 4, 0, -4 }, // 0x39 '9'
{ 48, 1, 3, 2, 0, -3 }, // 0x3A ':'
{ 49, 2, 4, 3, 0, -3 }, // 0x3B ';'
{ 50, 2, 3, 3, 0, -3 }, // 0x3C '<'
{ 51, 3, 3, 4, 0, -3 }, // 0x3D '='
{ 53, 2, 3, 3, 0, -3 }, // 0x3E '>'
{ 54, 3, 5, 4, 0, -4 }, // 0x3F '?'
{ 56, 3, 5, 4, 0, -4 }, // 0x40 '@'
{ 58, 3, 5, 4, 0, -4 }, // 0x41 'A'
{ 60, 3, 5, 4, 0, -4 }, // 0x42 'B'
{ 62, 3, 5, 4, 0, -4 }, // 0x43 'C'
{ 64, 3, 5, 4, 0, -4 }, // 0x44 'D'
{ 66, 3, 5, 4, 0, -4 }, // 0x45 'E'
{ 68, 3, 5, 4, 0, -4 }, // 0x46 'F'
{ 70, 3, 5, 4, 0, -4 }, // 0x47 'G'
{ 72, 3, 5, 4, 0, -4 }, // 0x48 'H'
{ 74, 1, 5, 2, 0, -4 }, // 0x49 'I'
{ 75, 3, 5, 4, 0, -4 }, // 0x4A 'J'
{ 77, 3, 5, 4, 0, -4 }, // 0x4B 'K'
{ 79, 3, 5, 4, 0, -4 }, // 0x4C 'L'
{ 81, 5, 5, 6, 0, -4 }, // 0x4D 'M'
{ 85, 4, 5, 5, 0, -4 }, // 0x4E 'N'
{ 88, 3, 5, 4, 0, -4 }, // 0x4F 'O'
{ 90, 3, 5, 4, 0, -4 }, // 0x50 'P'
{ 92, 3, 6, 4, 0, -4 }, // 0x51 'Q'
{ 95, 3, 5, 4, 0, -4 }, // 0x52 'R'
{ 97, 3, 5, 4, 0, -4 }, // 0x53 'S'
{ 99, 3, 5, 4, 0, -4 }, // 0x54 'T'
{ 101, 3, 5, 4, 0, -4 }, // 0x55 'U'
{ 103, 3, 5, 4, 0, -4 }, // 0x56 'V'
{ 105, 5, 5, 6, 0, -4 }, // 0x57 'W'
{ 109, 3, 5, 4, 0, -4 }, // 0x58 'X'
{ 111, 3, 5, 4, 0, -4 }, // 0x59 'Y'
{ 113, 3, 5, 4, 0, -4 }, // 0x5A 'Z'
{ 115, 2, 5, 3, 0, -4 }, // 0x5B '['
{ 117, 3, 5, 4, 0, -4 }, // 0x5C '\'
{ 119, 2, 5, 3, 0, -4 }, // 0x5D ']'
{ 121, 3, 2, 4, 0, -4 }, // 0x5E '^'
{ 122, 4, 1, 4, 0, 1 }, // 0x5F '_'
{ 123, 2, 2, 3, 0, -4 }, // 0x60 '`'
{ 124, 3, 4, 4, 0, -3 }, // 0x61 'a'
{ 126, 3, 5, 4, 0, -4 }, // 0x62 'b'
{ 128, 3, 3, 4, 0, -2 }, // 0x63 'c'
{ 130, 3, 5, 4, 0, -4 }, // 0x64 'd'
{ 132, 3, 4, 4, 0, -3 }, // 0x65 'e'
{ 134, 2, 5, 3, 0, -4 }, // 0x66 'f'
{ 136, 3, 5, 4, 0, -3 }, // 0x67 'g'
{ 138, 3, 5, 4, 0, -4 }, // 0x68 'h'
{ 140, 1, 5, 2, 0, -4 }, // 0x69 'i'
{ 141, 2, 6, 3, 0, -4 }, // 0x6A 'j'
{ 143, 3, 5, 4, 0, -4 }, // 0x6B 'k'
{ 145, 2, 5, 3, 0, -4 }, // 0x6C 'l'
{ 147, 5, 3, 6, 0, -2 }, // 0x6D 'm'
{ 149, 3, 3, 4, 0, -2 }, // 0x6E 'n'
{ 151, 3, 3, 4, 0, -2 }, // 0x6F 'o'
{ 153, 3, 4, 4, 0, -2 }, // 0x70 'p'
{ 155, 3, 4, 4, 0, -2 }, // 0x71 'q'
{ 157, 2, 3, 3, 0, -2 }, // 0x72 'r'
{ 158, 3, 4, 4, 0, -3 }, // 0x73 's'
{ 160, 2, 5, 3, 0, -4 }, // 0x74 't'
{ 162, 3, 3, 4, 0, -2 }, // 0x75 'u'
{ 164, 3, 3, 4, 0, -2 }, // 0x76 'v'
{ 166, 5, 3, 6, 0, -2 }, // 0x77 'w'
{ 168, 3, 3, 4, 0, -2 }, // 0x78 'x'
{ 170, 3, 4, 4, 0, -2 }, // 0x79 'y'
{ 172, 3, 4, 4, 0, -3 }, // 0x7A 'z'
{ 174, 3, 5, 4, 0, -4 }, // 0x7B '{'
{ 176, 1, 6, 2, 0, -4 }, // 0x7C '|'
{ 177, 3, 5, 4, 0, -4 }, // 0x7D '}'
{ 179, 4, 2, 5, 0, -3 } }; // 0x7E '~'
const GFXfont Picopixel PROGMEM = {
(uint8_t *)PicopixelBitmaps,
(GFXglyph *)PicopixelGlyphs,
0x20, 0x7E, 7 };
// Approx. 852 bytes