first commit
This commit is contained in:
@@ -0,0 +1 @@
|
||||
+
|
||||
@@ -0,0 +1,177 @@
|
||||
var cfgs = [
|
||||
[ "", "General configuration", "" ],
|
||||
[ "wifi", "Wifi mode (0=off, 1=client, 2=AP, 3=client or AP autoselect on startup)" ],
|
||||
[ "mdnsname", "Network mDNS name"],
|
||||
[ "ephftp", "FTP server for ephemeris data (RS92 decoder)"],
|
||||
[ "debug", "Debug mode (0/1)" ],
|
||||
[ "maxsonde", "Maximum number of QRG entries (must be ≤ 50)" ],
|
||||
[ "rxlat", "Receiver fixed latitude"],
|
||||
[ "rxlon", "Receiver fixed longitude"],
|
||||
[ "rxalt", "Receiver fixed altitude"],
|
||||
[ "", "OLED display configuration", "" ],
|
||||
[ "screenfile", "Screen config (0=automatic; 1-2=OLED predefined; other=custom)" ],
|
||||
[ "display", "Display screens (scan, default, ...)" ],
|
||||
[ "dispsaver", "Display saver (0=never/1=always/2=ifnorx [+10*n: after n sec.])" ],
|
||||
[ "dispcontrast", "OLED contrast (-1=use default; 0..255=set contrast)" ],
|
||||
[ "norx_timeout", "No-RX-timeout in seconds (-1=disabled)"],
|
||||
[ "", "Spectrum display configuration", "" ],
|
||||
[ "spectrum", "Show spectrum on start (-1=no, 0=forever, >0=time [sec])" ],
|
||||
[ "startfreq", "Start frequency (MHz, default 400)" ],
|
||||
[ "channelbw", "Bandwidth (kHz)" ],
|
||||
[ "marker", "Spectrum MHz marker" ], // maybe remove, assume always ==1?
|
||||
[ "noisefloor", "Spectrum noisefloor" ],
|
||||
[ "", "Receiver configuration", "" ],
|
||||
[ "freqofs", "RX frequency offset (Hz)"],
|
||||
[ "rs41.agcbw", "RS41 AGC bandwidth"],
|
||||
[ "rs41.rxbw", "RS41 RX bandwidth"],
|
||||
[ "rs92.rxbw", "RS92 RX (and AGC) bandwidth"],
|
||||
[ "rs92.alt2d", "RS92 2D fix default altitude"],
|
||||
[ "dfm.agcbw", "DFM AGC bandwidth"],
|
||||
[ "dfm.rxbw", "DFM RX bandwidth"],
|
||||
[ "m10m20.agcbw", "M10/M20 AGC bandwidth"],
|
||||
[ "m10m20.rxbw", "M10/M20 RX bandwidth"],
|
||||
[ "mp3h.agcbw", "MP3H AGC bandwidth"],
|
||||
[ "mp3h.rxbw", "MP3H RX bandwidth"],
|
||||
[ "", "KISS TNC/AXUDP/AXTCP data feed configuration", ""],
|
||||
[ "call", "Call"],
|
||||
[ "passcode", "Passcode"],
|
||||
[ "kisstnc.active", "KISS TNC (port 14590) (needs reboot)"],
|
||||
[ "axudp.active", "AXUDP active"],
|
||||
[ "axudp.host", "AXUDP host"],
|
||||
[ "axudp.port", "AXUDP port"],
|
||||
[ "axudp.highrate", "Rate limit"],
|
||||
[ "tcp.active", "APRS TCP active"],
|
||||
[ "tcp.host", "APRS TCP host"],
|
||||
[ "tcp.port", "APRS TCP port"],
|
||||
[ "tcp.highrate", "Rate limit"],
|
||||
[ "tcp.objcall", "APRS object call"],
|
||||
[ "tcp.beaconsym", "APRS tracker symbol"],
|
||||
[ "tcp.chase", "APRS location reporting (0=off, 1=fixed, 2=chase/GPS, 3=auto)"],
|
||||
[ "tcp.comment", "APRS location comment"],
|
||||
[ "", "MQTT data feed configuration", ""],
|
||||
[ "mqtt.active", "MQTT active (needs reboot)"],
|
||||
[ "mqtt.id", "MQTT client ID"],
|
||||
[ "mqtt.host", "MQTT server hostname"],
|
||||
[ "mqtt.port", "MQTT port"],
|
||||
[ "mqtt.username", "MQTT username"],
|
||||
[ "mqtt.password", "MQTT password"],
|
||||
[ "mqtt.prefix", "MQTT prefix"],
|
||||
[ "", "Chasemapper settings", ""],
|
||||
[ "cm.active", "Chasemapper active (0=disabled, 1=active)"],
|
||||
[ "cm.host", "Chasemapper UDP host"],
|
||||
[ "cm.port", "Chasemapper UDP port"],
|
||||
[ "", "SondeHub settings", ""],
|
||||
[ "sondehub.active", "SondeHub reporting (0=disabled, 1=active)"],
|
||||
[ "sondehub.chase", "SondeHub location reporting (0=off, 1=fixed, 2=chase/GPS, 3=auto)"],
|
||||
[ "sondehub.host", "SondeHub host (DO NOT CHANGE)"],
|
||||
[ "sondehub.callsign", "Callsign"],
|
||||
[ "sondehub.antenna", "Antenna (optional, visisble on SondeHub tracker)"],
|
||||
[ "sondehub.email", "SondeHub email (optional, only used to contact in case of upload errors)"],
|
||||
[ "", "SondeHub frequency import", "" ],
|
||||
[ "sondehub.fiactive", "SondeHub frequency import active (0=disabled, 1=active)" ],
|
||||
[ "sondehub.fiinterval", "Import frequency (minutes, ≥ 5)" ],
|
||||
[ "sondehub.fimaxdist", "Import maximum distance (km, ≤ 700)" ],
|
||||
[ "sondehub.fimaxage", "Import maximum age (hours, ≤ 48)" ],
|
||||
[ "", "Hardware configuration (requires reboot)", ""],
|
||||
[ "disptype", "Display type (0=OLED/SSD1306, 2=OLED/SH1106, 5=ST7789)"],
|
||||
[ "oled_sda", "OLED SDA/TFT SDA"],
|
||||
[ "oled_scl", "OLED SCL/TFT CLK"],
|
||||
[ "oled_rst", "OLED RST/TFT RST (needs reboot)"],
|
||||
[ "button_pin", "Button input port"],
|
||||
[ "button2_pin", "Button 2 input port"],
|
||||
[ "button2_axp", "Use AXP192 PWR as Button 2"],
|
||||
[ "touch_thresh", "Touch button threshold<br>(0 for calib mode)"],
|
||||
[ "power_pout", "Power control port"],
|
||||
[ "led_pout", "LED output port (25)"],
|
||||
|
||||
["buzzerOn", "Buzzer (0=Disabled, 1 Enable)"],
|
||||
["buzzerPort", "Buzzer Port (4)"],
|
||||
["buzzerFreq", "Buzzer Frequency (700)"],
|
||||
["dbsmetre", "dB = 0 / Smetre =1)"],
|
||||
["degdec", "Lat,Lon Decimal =0 ou Degres =1)"],
|
||||
|
||||
[ "gps_rxd", "GPS RXD pin (-1 to disable)"],
|
||||
[ "gps_txd", "GPS TXD pin (not really needed)"],
|
||||
[ "batt_adc", "Battery measurement pin"],
|
||||
[ "sx1278_ss", "SX1278 SS"],
|
||||
[ "sx1278_miso", "SX1278 MISO"],
|
||||
[ "sx1278_mosi", "SX1278 MOSI"],
|
||||
[ "sx1278_sck", "SX1278 SCK"],
|
||||
];
|
||||
|
||||
function mkcfg(id, key, label, value) {
|
||||
var s = "<tr style=\"visibility: collapse;\" class=\"cfgpanel\"><td>" + label + "</td><td><input name=\"" + key + "\" type=\"text\" value=\"" + value + "\"/></td></tr>\n";
|
||||
return s;
|
||||
}
|
||||
function mkcfgbtn(id, key, label, value) {
|
||||
var touch = "";
|
||||
var v = value;
|
||||
if(v != -1 && (v&128)) {
|
||||
touch = " checked";
|
||||
v = v & 127;
|
||||
}
|
||||
var s = "<tr style=\"visibility:collapse\" class=\"cfgpanel\"><td>" + label + "</td><td><input name=\"" + key + "\" type=\"text\" size=\"3\" value=\"" + v + "\"/>";
|
||||
s += "<input type=\"checkbox\" name=\"" + key + "#\" "+touch+"> Touch</td></tr>\n";
|
||||
return s;
|
||||
}
|
||||
|
||||
function mksep(id,label,url) {
|
||||
return "<tr class=\"cfgheader\"><th class=\"cfg\" align=\"left\" colspan=\"2\">"+label+" <a href=\""+url+"\" target=\”_blank\">[wiki]</a></th></tr>\n";
|
||||
}
|
||||
function rowdisp(id,disp) {
|
||||
var matches = document.querySelectorAll("tr."+id);
|
||||
matches.forEach(function(e) { if(disp) e.hidden=true; else e.removeAttribute('hidden');});
|
||||
hid=id; nid="N"+id;
|
||||
if(!disp) { hid=nid; nid=id; }
|
||||
document.querySelector("span."+hid).hidden=true;
|
||||
document.querySelector("span."+nid).removeAttribute('hidden');
|
||||
}
|
||||
function configTable() {
|
||||
// iterate over cfgs
|
||||
var tab = "<table width=\"100%\"><tr><th>Option</th><th>Value</th></tr>\n";
|
||||
var id=0;
|
||||
for(i=0; i<cfgs.length; i++) {
|
||||
var key = cfgs[i][0];
|
||||
var lbl = cfgs[i][1];
|
||||
if(key) {
|
||||
if(key=="button_pin" || key=="button2_pin") {
|
||||
tab += mkcfgbtn("s"+id, key, lbl, cf.get(key));
|
||||
} else if (key=="display") {
|
||||
tab += mkcfg("s"+id, key, lbl, cf.get(key));
|
||||
tab += "<tr style=\"visibility:collapse\" class=\"cfgpanel\"><td>"+scr+"</td><td></td></tr>"
|
||||
} else {
|
||||
tab += mkcfg("s"+id, key, lbl, cf.get(key));
|
||||
}
|
||||
} else {
|
||||
id++;
|
||||
tab += mksep("s"+id, lbl, cfgs[i][2]);
|
||||
}
|
||||
}
|
||||
tab += "</table>";
|
||||
var cfgdiv = document.getElementById("cfgtab");
|
||||
cfgdiv.innerHTML = tab;
|
||||
// enable collapse / expand of items below a header
|
||||
var acc = document.getElementsByClassName("cfgheader");
|
||||
for(i=0; i<acc.length; i++) {
|
||||
acc[i].firstChild.innerHTML = "[+] " + acc[i].firstChild.innerHTML;
|
||||
acc[i].addEventListener("click", function(e) {
|
||||
if(e.target.nodeName=="A") return;
|
||||
achar = "[+]";
|
||||
if(this.classList.toggle("active")) achar = "[\u2212]";
|
||||
this.firstChild.innerHTML = achar + this.firstChild.innerHTML.substring(3);
|
||||
var panel = this;
|
||||
console.log(panel);
|
||||
while( panel = panel.nextElementSibling) {
|
||||
console.log(panel);
|
||||
if ( panel.className!="cfgpanel") { break; }
|
||||
if(panel.style.visibility==="collapse") {
|
||||
panel.style.visibility="visible";
|
||||
} else {
|
||||
console.log("none");
|
||||
panel.style.visibility="collapse";
|
||||
}
|
||||
}
|
||||
});
|
||||
}
|
||||
acc[0].click();
|
||||
}
|
||||
@@ -0,0 +1,150 @@
|
||||
#-------------------------------#
|
||||
# Hardware depending settings
|
||||
#-------------------------------#
|
||||
# pin: 255=disabled; x=button x+128=touch button
|
||||
#button_pin=130
|
||||
#button2_pin=142
|
||||
# No specification in config file: try autodetection (gpio4 pin level at startup)
|
||||
#button_pin=0
|
||||
#button2_pin=255
|
||||
#button2_axp=0
|
||||
# LED port
|
||||
#led_pout=-1
|
||||
# OLED Setup is depending on hardware of LoRa board
|
||||
# TTGO v1: SDA=4 SCL=15, RST=16
|
||||
# TTGO v2: SDA=21 SCL=22, RST=16
|
||||
# T-BEAM, OLED: SDA=21, SCL=22, RST=16
|
||||
# T-BEAM, ILI9225: SDA=4, CLK=21, RS=2, RST=22, CS=0
|
||||
# No specification in config file: try autodetection (gpio4 pin level at startup)
|
||||
#
|
||||
# disptype: 0=OLED, 1=ILI9225
|
||||
#disptype=0
|
||||
#oled_sda=21
|
||||
#oled_scl=22
|
||||
#oled_rst=16
|
||||
rxlat=
|
||||
rxlon=
|
||||
rxalt=
|
||||
oled_orient=1
|
||||
#gps_rxd=-1
|
||||
#gps_txd=-1
|
||||
# Frequency correction, in Hz
|
||||
# freqofs=0
|
||||
#-------------------------------#
|
||||
# General config settings
|
||||
#-------------------------------#
|
||||
maxsonde=20
|
||||
debug=0
|
||||
# wifi mode: 1=client in background; 2=AP in background; 3=client on startup, ap if failure
|
||||
wifi=3
|
||||
# TCP/IP KISS TNC in port 14590 for APRSdroid (0=disabled, 1=enabled)
|
||||
kisstnc.active = 1
|
||||
|
||||
# which screens file to use (0: automated selection based on display type and orientation, i>0: screens${i}.txt
|
||||
# predefined: 1: for OLED, 2: for ILI9225; 3: for ILI9225 (portrait mode); 4: for ILI9431; 5: for ILI9431 (portrait mode)
|
||||
# screenfile=2
|
||||
# display configuration. List of "displays"
|
||||
# first entry: "Scanner" display
|
||||
# second entry: default "Receiver" display
|
||||
# additional entries: alternative receiver display, activated by button
|
||||
display=0,1,2,3,4,5,6,7
|
||||
# turn off display: 0=never, 1=always, 2=if no RX; (+n*10: after n seconds)
|
||||
dispsaver=0
|
||||
# set OLED contrast (0..255) or leave at factory default (-1)
|
||||
dispcontrast=-1
|
||||
# set to -1 to disable (used for "N" values in timers in screens.txt). Value in seconds
|
||||
norx_timeout=20
|
||||
#Add F4IYT
|
||||
buzzerOn=1
|
||||
buzzerPort=25
|
||||
buzzerFreq=700
|
||||
dbsmetre=1
|
||||
#-------------------------------#
|
||||
# Spectrum display settings
|
||||
#-------------------------------#
|
||||
startfreq=400
|
||||
channelbw=10
|
||||
spectrum=-1 #10
|
||||
noisefloor=-125
|
||||
marker=1
|
||||
#-------------------------------#
|
||||
# APRS settings
|
||||
#-------------------------------#
|
||||
call=N0CALL
|
||||
passcode=12345
|
||||
#-------------------------------#
|
||||
# Sonde specific settings: bandwidth
|
||||
# valid values: 3100, 3900, 5200, 6300, 7800, 10400, 12500,
|
||||
# 15600, 20800, 25000, ...
|
||||
# other values will be rounded up to the next valid value
|
||||
# rs92.alt2d: default altitude used by RS92 decoder if only 3 sats available
|
||||
#-------------------------------#
|
||||
rs41.agcbw=12500
|
||||
rs41.rxbw=6300
|
||||
rs92.rxbw=12500
|
||||
rs92.alt2d=480
|
||||
dfm.agcbw=20800
|
||||
dfm.rxbw=10400
|
||||
#-------------------------------#
|
||||
# ftp server for RINEX data (for RS92)
|
||||
# YYYY/DDD/brdcDDD0.YYn.gz is appended
|
||||
# s1: igs.bkg.bund.de/IGS/BRDC/
|
||||
# s2: www.ngs.noaa.gov/cors/rinex/
|
||||
#-------------------------------#
|
||||
#ephftp=www.ngs.noaa.gov/cors/rinex/
|
||||
#ephftp=igs.bkg.bund.de/IGS/BRDC/
|
||||
ephftp=gssc.esa.int/gnss/data/daily/
|
||||
#-------------------------------#
|
||||
# axudp for sending to aprsmap
|
||||
#-------------------------------#
|
||||
# local use only, do not feed to public services
|
||||
# data not sanitized / quality checked, outliers not filtered out
|
||||
axudp.active=1
|
||||
axudp.host=192.168.42.20
|
||||
axudp.port=9002
|
||||
axudp.symbol=/O
|
||||
axudp.highrate=1
|
||||
#-------------------------------#
|
||||
# connect to some aprs server
|
||||
#-------------------------------#
|
||||
tcp.active=0
|
||||
tcp.host=radiosondy.info
|
||||
tcp.port=14590
|
||||
tcp.symbol=/O
|
||||
tcp.highrate=20
|
||||
# send beacon (possibly with different call or SSID)
|
||||
tcp.chase=0
|
||||
tcp.objcall=
|
||||
tcp.beaconsym=/`/(
|
||||
tcp.comment=
|
||||
#-------------------------------#
|
||||
# mqtt settings
|
||||
#-------------------------------#
|
||||
# data not sanitized / quality checked, outliers not filtered out
|
||||
mqtt.active=0
|
||||
mqtt.id=rdz_sonde_server
|
||||
mqtt.ip=192.168.1.5
|
||||
mqtt.port=1883
|
||||
mqtt.username=
|
||||
mqtt.password=
|
||||
mqtt.prefix=rdz_sonde_server/
|
||||
#-------------------------------#
|
||||
# Sondehub v2 settings
|
||||
#-------------------------------#
|
||||
# Sondehub v2 DB settings
|
||||
sondehub.active=0
|
||||
sondehub.chase=3
|
||||
sondehub.host=api.v2.sondehub.org
|
||||
sondehub.callsign=CHANGEME_RDZTTGO
|
||||
sondehub.antenna=
|
||||
sondehub.email=
|
||||
#-------------------------------#
|
||||
# Sondehub freq import settings
|
||||
#-------------------------------#
|
||||
shfimp.active=0
|
||||
shfimp.interval=60
|
||||
shfimp.maxdist=150
|
||||
shfimp.maxage=6
|
||||
#-------------------------------#
|
||||
# EOF
|
||||
#-------------------------------#
|
||||
Executable
BIN
Binary file not shown.
Executable
BIN
Binary file not shown.
Executable
+193
@@ -0,0 +1,193 @@
|
||||
<!DOCTYPE html>
|
||||
<html>
|
||||
<head>
|
||||
<title>RadioSonde (version %VERSION_ID%)</title>
|
||||
<meta name="viewport" content="width=device-width, initial-scale=1">
|
||||
<link rel="icon" href="data:,">
|
||||
<link rel="stylesheet" type="text/css" href="style.css">
|
||||
</head>
|
||||
<body style="background-color: #008CBA;">
|
||||
<div style="background-color: #FFFFFF;">
|
||||
<h2><i onclick="w3_open()" class="fa fa-bars"></i> RadioSonde (version %VERSION_ID%)</h2>
|
||||
</div>
|
||||
<!--
|
||||
<p>GPIO state: <strong> %STATE%</strong></p>
|
||||
<p><a href="/on"><button class="button">ON</button></a></p>
|
||||
<p><a href="/off"><button class="button button2">OFF</button></a></p>
|
||||
-->
|
||||
|
||||
<!-- Side Navigation -->
|
||||
<nav style="text-align: left; background-color: #aaa; font-weight: bold; display:none" id="mySidebar">
|
||||
<h3>MENU</h3>
|
||||
<button class="tablinks fa fa-close" onclick="w3_close();"> Close</button><br>
|
||||
<button class="tablinks fa fa-dashboard" onclick="selTab(event,'QRG'); w3_close()" id="defaultTab"> QRG</button><br>
|
||||
<button class="tablinks fa fa-wifi" onclick="selTab(event,'WiFi'); w3_close()"> WiFi</button><br>
|
||||
<button class="tablinks fa fa-database" onclick="selTab(event,'Data'); w3_close()"> Data</button><br>
|
||||
<button class="tablinks fa fa-map-marker" onclick="selTab(event,'Map'); w3_close()"> Map</button><br>
|
||||
<button class="tablinks fa fa-map-marker" onclick="document.location.href='livemap.html'"> Livemap</button><br>
|
||||
<button class="tablinks fa fa-gears" onclick="selTab(event,'Config'); w3_close()"> Config</button><br>
|
||||
<button class="tablinks fa fa-sliders" onclick="selTab(event,'Control'); w3_close()"> Control</button><br>
|
||||
<button class="tablinks fa fa-download" onclick="selTab(event,'Update'); w3_close()"> Update</button><br>
|
||||
<button class="tablinks fa fa-support" onclick="selTab(event,'About'); w3_close()"> About</button><br><br><br><br>
|
||||
</nav>
|
||||
|
||||
<div id="QRG" class="tabcontent">
|
||||
<h3> QRG - Setup</h3>
|
||||
<iframe src="qrg.html" style="border:none;" width="100%%" height="100%%"></iframe>
|
||||
</div>
|
||||
|
||||
<div id="WiFi" class="tabcontent">
|
||||
<h3> WiFi - Settings</h3>
|
||||
<iframe src="wifi.html" style="border:none;" width="100%%" height="100%%"></iframe>
|
||||
</div>
|
||||
|
||||
<div id="Data" class="tabcontent" data-src="status.html">
|
||||
<h3>Data</h3>
|
||||
<iframe src="status.html" style="border:none;" width="100%%" height="100%%"></iframe>
|
||||
</div>
|
||||
|
||||
<div id="Map" class="tabcontent" data-src="map.html">
|
||||
<iframe src="map.html" style="border:none;" width="98%%" height="98%%"></iframe>
|
||||
</div>
|
||||
|
||||
<div id="LiveMap" class="tabcontent" data-src="livemap.html">
|
||||
<iframe src="livemap.html" style="border:none;" width="98%%" height="98%%"></iframe>
|
||||
</div>
|
||||
|
||||
<div id="Config" class="tabcontent">
|
||||
<h3>Configuration</h3>
|
||||
<iframe src="config.html" style="border:none;" width="100%%" height="100%%"></iframe>
|
||||
</div>
|
||||
|
||||
<div id="Control" class="tabcontent">
|
||||
<h3>Control</h3>
|
||||
<iframe src="control.html" style="border:none;" width="100%%" height="100%%"></iframe>
|
||||
</div>
|
||||
|
||||
<div id="Update" class="tabcontent">
|
||||
<h3>Update</h3>
|
||||
<iframe src="update.html" style="border:none;" width="100%%" height="100%%"></iframe>
|
||||
</div>
|
||||
<div id="Telemetry" class="tabcontent">
|
||||
<h3>Telemetry</h3>
|
||||
<button onclick="javascript:window.open('/download','_self');">Telemetry</button>
|
||||
</div>
|
||||
<div id="About" class="tabcontent">
|
||||
%VERSION_NAME%<br>
|
||||
CopyLeft 2020-2022 Modifier par <a href="http://openpmr.fr.nf/">Xav, FRS2013</a> & Vigor<br>
|
||||
<a href="#Update">Check for update (requires TTGO internet connection via WiFi)</a><br><br>
|
||||
<br>
|
||||
(version %VERSION_ID%)
|
||||
<br>
|
||||
Original project by Hansi<br>
|
||||
Copyright © 2019-2022 by Hansi Reiser, DL9RDZ<br>
|
||||
<br><br>
|
||||
Autodetect info: %AUTODETECT_INFO%<br>
|
||||
<br>
|
||||
RS92 RINEX eph state: %EPHSTATE%<br>
|
||||
<br>
|
||||
This program is free software; you can redistribute it and/or
|
||||
modify it under the terms of the GNU General Public License as
|
||||
published by the Free Software Foundation; either version 2 of
|
||||
the License, or (at your option) any later version.<br>
|
||||
See <a href="https://www.gnu.org/licenses/gpl-2.0.txt">https://www.gnu.org/licenses/gpl-2.0.txt</a>
|
||||
for details.
|
||||
</div>
|
||||
|
||||
<div style="background-color: #008CBA;"><br>
|
||||
<div class="footer"><span></span><span class="ttgoinfo">RadioSonde %VERSION_ID%</span></div>
|
||||
</div>
|
||||
<script>
|
||||
function selTab(evt, id) {
|
||||
var i, tabcontent, tablinks;
|
||||
tabcontent=document.getElementsByClassName("tabcontent");
|
||||
for(i=0; i<tabcontent.length; i++) {
|
||||
tabcontent[i].style.display = "none";
|
||||
var link = tabcontent[i].dataset.src;
|
||||
if(link) {
|
||||
var iframe = tabcontent[i].getElementsByTagName("iframe")[0];
|
||||
iframe.setAttribute("src", "");
|
||||
}
|
||||
}
|
||||
tablinks=document.getElementsByClassName("tablinks");
|
||||
for(i=0; i<tablinks.length; i++) {
|
||||
tablinks[i].className = tablinks[i].className.replace(" active", "");
|
||||
}
|
||||
var act = document.getElementById(id);
|
||||
act.style.display = "block";
|
||||
evt.currentTarget.className += " active";
|
||||
|
||||
var link = act.dataset.src;
|
||||
if(link) {
|
||||
var iframe = act.getElementsByTagName("iframe")[0];
|
||||
iframe.setAttribute("src", link);
|
||||
}
|
||||
}
|
||||
document.getElementById("defaultTab").click();
|
||||
</script>
|
||||
<!-- Script for Sidebar, Tabs, Accordions, Progress bars and slideshows -->
|
||||
<script>
|
||||
// Side navigation
|
||||
function w3_open() {
|
||||
var x = document.getElementById("mySidebar");
|
||||
x.style.width = "100%";
|
||||
x.style.height = "80%";
|
||||
x.style.fontSize = "40px";
|
||||
x.style.paddingTop = "0%";
|
||||
x.style.display = "block";
|
||||
}
|
||||
function w3_close() {
|
||||
document.getElementById("mySidebar").style.display = "none";
|
||||
}
|
||||
|
||||
// Tabs
|
||||
function openCity(evt, cityName) {
|
||||
var i;
|
||||
var x = document.getElementsByClassName("city");
|
||||
for (i = 0; i < x.length; i++) {
|
||||
x[i].style.display = "none";
|
||||
}
|
||||
var activebtn = document.getElementsByClassName("testbtn");
|
||||
for (i = 0; i < x.length; i++) {
|
||||
activebtn[i].className = activebtn[i].className.replace(" w3-dark-grey", "");
|
||||
}
|
||||
document.getElementById(cityName).style.display = "block";
|
||||
evt.currentTarget.className += " w3-dark-grey";
|
||||
}
|
||||
|
||||
var mybtn = document.getElementsByClassName("testbtn")[0];
|
||||
mybtn.click();
|
||||
|
||||
// Accordions
|
||||
function myAccFunc(id) {
|
||||
var x = document.getElementById(id);
|
||||
if (x.className.indexOf("w3-show") == -1) {
|
||||
x.className += " w3-show";
|
||||
} else {
|
||||
x.className = x.className.replace(" w3-show", "");
|
||||
}
|
||||
}
|
||||
|
||||
// Slideshows
|
||||
var slideIndex = 1;
|
||||
|
||||
function plusDivs(n) {
|
||||
slideIndex = slideIndex + n;
|
||||
showDivs(slideIndex);
|
||||
}
|
||||
|
||||
function showDivs(n) {
|
||||
var x = document.getElementsByClassName("mySlides");
|
||||
if (n > x.length) {slideIndex = 1}
|
||||
if (n < 1) {slideIndex = x.length} ;
|
||||
for (i = 0; i < x.length; i++) {
|
||||
x[i].style.display = "none";
|
||||
}
|
||||
x[slideIndex-1].style.display = "block";
|
||||
}
|
||||
|
||||
showDivs(1);
|
||||
</script>
|
||||
</body>
|
||||
</html>
|
||||
|
||||
@@ -0,0 +1,18 @@
|
||||
<!DOCTYPE html>
|
||||
<html>
|
||||
<head>
|
||||
<title>RadioSonde LiveMap</title>
|
||||
<meta charset="utf-8" />
|
||||
<meta name="viewport" content="width=device-width, initial-scale=1, shrink-to-fit=no" />
|
||||
<link rel="stylesheet" type="text/css" href="style_map.css" />
|
||||
<link rel="stylesheet" href="https://unpkg.com/leaflet@1.8.0/dist/leaflet.css" />
|
||||
<script>var mapcenter=[%MAPCENTER%];</script>
|
||||
<script src="https://code.jquery.com/jquery-3.6.0.min.js"></script>
|
||||
<script src="https://unpkg.com/leaflet@1.8.0/dist/leaflet.js"></script>
|
||||
<script src="https://unpkg.com/leaflet.marker.slideto@0.2.0/Leaflet.Marker.SlideTo.js"></script>
|
||||
<script src="livemap.js"></script>
|
||||
</head>
|
||||
<body>
|
||||
<div id="map"></div>
|
||||
</body>
|
||||
</html>
|
||||
@@ -0,0 +1,530 @@
|
||||
try {
|
||||
var check = $(document);
|
||||
} catch (e) {
|
||||
document.addEventListener("DOMContentLoaded", function(event) {
|
||||
document.getElementById('map').innerHTML = '<br /><br />In order to use this functionality, there must be an internet connection.<br /><br/><a href="livemap.html">retry</a><br /><br/><a href="index.html">go back</a>';
|
||||
});
|
||||
}
|
||||
|
||||
$(document).ready(function(){
|
||||
|
||||
var map = L.map('map', { attributionControl: false, zoomControl: false });
|
||||
map.on('mousedown touchstart',function () { follow=false; });
|
||||
|
||||
L.control.scale().addTo(map);
|
||||
L.control.attribution({prefix:false}).addTo(map);
|
||||
|
||||
var osmlight = L.tileLayer('https://{s}.tile.openstreetmap.de/{z}/{x}/{y}.png', {
|
||||
maxZoom: 19,
|
||||
attribution: '© <a href="https://www.openstreetmap.org/copyright">OpenStreetMap</a> contributors'
|
||||
});
|
||||
|
||||
var osmdark = L.tileLayer('https://{s}.basemaps.cartocdn.com/dark_all/{z}/{x}/{y}.png', {
|
||||
attribution: '© <a href="https://www.openstreetmap.org/copyright">OpenStreetMap</a> contributors © <a href="https://carto.com/attributions">CARTO</a>',
|
||||
maxZoom: 19
|
||||
});
|
||||
|
||||
var opentopo = L.tileLayer('https://{s}.tile.opentopomap.org/{z}/{x}/{y}.png', {
|
||||
maxZoom: 17,
|
||||
attribution: 'Map data: © <a href="https://www.openstreetmap.org/copyright">OpenStreetMap</a> contributors, <a href="http://viewfinderpanoramas.org">SRTM</a><br />Map style: © <a href="https://opentopomap.org">OpenTopoMap</a> (<a href="https://creativecommons.org/licenses/by-sa/3.0/">CC-BY-SA</a>)'
|
||||
});
|
||||
|
||||
var esri = L.tileLayer('https://server.arcgisonline.com/ArcGIS/rest/services/World_Imagery/MapServer/tile/{z}/{y}/{x}', {
|
||||
attribution: 'Tiles © Esri — Source: Esri, i-cubed, USDA, USGS, AEX, GeoEye,<br />Getmapping, Aerogrid, IGN, IGP, UPR-EGP, and the GIS User Community',
|
||||
maxZoom: 21
|
||||
});
|
||||
|
||||
var basemap;
|
||||
if (window.matchMedia && window.matchMedia('(prefers-color-scheme: dark)').matches) {
|
||||
map.addLayer(osmdark);
|
||||
basemap='osmdark';
|
||||
} else {
|
||||
map.addLayer(osmlight);
|
||||
basemap='osmlight';
|
||||
}
|
||||
|
||||
basemap_change = function () {
|
||||
if (basemap == 'osmlight') {
|
||||
map.removeLayer(osmlight);
|
||||
map.addLayer(opentopo);
|
||||
basemap = 'opentopo';
|
||||
} else if (basemap == 'opentopo') {
|
||||
map.removeLayer(opentopo);
|
||||
map.addLayer(esri);
|
||||
basemap = 'esri';
|
||||
} else if (basemap == 'esri') {
|
||||
map.removeLayer(esri);
|
||||
map.addLayer(osmdark);
|
||||
basemap = 'osmdark';
|
||||
} else {
|
||||
map.removeLayer(osmdark);
|
||||
map.addLayer(osmlight);
|
||||
basemap = 'osmlight';
|
||||
}
|
||||
};
|
||||
|
||||
if(mapcenter) map.setView(mapcenter, 5);
|
||||
else map.setView([51.163361,10.447683], 5); // Mitte DE
|
||||
|
||||
var reddot = '<span class="ldot rbg"></span>';
|
||||
var yellowdot = '<span class="ldot ybg"></span>';
|
||||
var greendot = '<span class="ldot gbg"></span>';
|
||||
var lastframe = 0;
|
||||
|
||||
$('#map .leaflet-control-container').append(L.DomUtil.create('div', 'leaflet-top leaflet-center leaflet-header'));
|
||||
var header = '';
|
||||
header += '<div id="sonde_main"><b>rdzTTGOSonde LiveMap</b><br />🎈 <b><span id="sonde_id"></span> - <span id="sonde_freq"></span> MHz - <span id="sonde_type"></span></b></div>';
|
||||
header += '<div id="sonde_detail"><span id="sonde_alt"></span>m | <span id="sonde_climb"></span>m/s | <span id="sonde_speed"></span>km/h | <span id="sonde_dir"></span>°<br /><span id="sonde_time"></span> | -<span id="sonde_rssi"></span>dBm</div>';
|
||||
header += '<div id="sonde_status"><span id="sonde_statbar"></span></div>';
|
||||
header += '<div id="settings"><br /><b>Prediction-Settings</b><br />';
|
||||
|
||||
header += '<label for="burst">Burst at:</label><input type="text" id="burst" maxlength="5" value="..." /> m<br />';
|
||||
header += '<label for="overwrite_descend">Descending:</label><input type="text" id="overwrite_descend" maxlength="2" value="..." /> m/s<br />';
|
||||
header += '<label for="overwrite_descend_till">Use this descending until:</label><input type="text" id="overwrite_descend_till" maxlength="5" value="..." /> m<br />';
|
||||
header += '<small>after the transmitted descend will be used</small>';
|
||||
header += '<div id="submit"><input type="button" value="save" onclick="settings_save();"/> <input type="button" id="submit" value="reset" onclick="settings_reset();"/></div>';
|
||||
header += '</div>';
|
||||
$('.leaflet-header').append(header);
|
||||
|
||||
|
||||
$('#map .leaflet-control-container').append(L.DomUtil.create('div', 'leaflet-bottom leaflet-center leaflet-footer'));
|
||||
var footer = '';
|
||||
footer += '<div id="gps_main"><b>Direction: </b><span class="gps_dir">...</span>°<br /><b>Distance: </b><span class="gps_dist">...</span>m</div>';
|
||||
$('.leaflet-footer').append(footer);
|
||||
|
||||
var statbar = '';
|
||||
headtxt = function(data,stat) {
|
||||
var staticon = (stat == '1')?greendot:yellowdot;
|
||||
statbar = staticon + statbar;
|
||||
if ((statbar.length) > 10*greendot.length) { statbar = statbar.substring(0,10*greendot.length); }
|
||||
if (data.id && data.vframe != lastframe ) {
|
||||
lastframe = data.vframe;
|
||||
$('#sonde_id').html(data.id);
|
||||
$('#sonde_alt').html(data.alt);
|
||||
$('#sonde_climb').html(data.climb);
|
||||
$('#sonde_speed').html( mr(data.speed * 3.6 * 10) / 10 );
|
||||
$('#sonde_dir').html(data.dir);
|
||||
$('#sonde_time').html(new Date(data.time * 1000).toISOString());
|
||||
$('#sonde_rssi').html(data.rssi / 2 );
|
||||
$('#sonde_detail').show();
|
||||
} else {
|
||||
if (!data.id) {
|
||||
$('#sonde_id').html(data.launchsite.trim());
|
||||
// $('#sonde_detail').hide();
|
||||
}
|
||||
}
|
||||
$('#sonde_freq').html(data.freq);
|
||||
$('#sonde_type').html(data.type);
|
||||
$('#sonde_statbar').html(' '+statbar);
|
||||
};
|
||||
|
||||
map.addControl(new L.Control.Button([ { position: 'topleft', text: '🔙', href: 'index.html' } ]));
|
||||
|
||||
L.control.zoom({ position:'topleft' }).addTo(map);
|
||||
|
||||
map.addControl(new L.Control.Button([ { position: 'topleft', text: '🗺️', href: 'javascript:basemap_change();' } ]));
|
||||
|
||||
map.addControl(new L.Control.Button([ { position: 'topright', id: "status", text: '', href: 'javascript:get_data();' } ]));
|
||||
|
||||
map.addControl(new L.Control.Button([
|
||||
{ position:'topright', text: '🎈', href: 'javascript:show(marker[last_id],\'marker\');' },
|
||||
{ text: '〰️', href: 'javascript:show_line();' },
|
||||
{ text: '💥', href: 'javascript:show(marker_burst[last_id],\'burst\');' },
|
||||
{ text: '🎯', href: 'javascript:show(marker_landing[last_id],\'landing\');' }
|
||||
]));
|
||||
|
||||
map.addControl(new L.Control.Button([ { position:'topright', text: '⚙️', href: 'javascript:show_settings();' } ]));
|
||||
|
||||
|
||||
|
||||
show = function(e,p) {
|
||||
if (p == 'landing') { get_predict(last_data); }
|
||||
if (e) {
|
||||
map.closePopup();
|
||||
map.setView(map._layers[e._leaflet_id].getLatLng());
|
||||
map._layers[e._leaflet_id].openPopup();
|
||||
follow = p;
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
getTwoBounds = function (a,b) {
|
||||
var sW = new L.LatLng((a._southWest.lat > b._southWest.lat)?b._southWest.lat:a._southWest.lat, (a._southWest.lng > b._southWest.lng)?b._southWest.lng:a._southWest.lng);
|
||||
var nE = new L.LatLng((a._northEast.lat < b._northEast.lat)?b._northEast.lat:a._northEast.lat, (a._northEast.lng < b._northEast.lng)?b._northEast.lng:a._northEast.lng);
|
||||
|
||||
return new L.LatLngBounds(sW, nE);
|
||||
};
|
||||
|
||||
show_line = function() {
|
||||
$('.i_position, .i_landing').remove();
|
||||
map.closePopup();
|
||||
if (line[last_id]._latlngs.length != 0 && line_predict[last_id]._latlngs.length != 0) {
|
||||
map.fitBounds(getTwoBounds(line[last_id].getBounds(),line_predict[last_id].getBounds()));
|
||||
} else if (line[last_id]._latlngs.length != 0) {
|
||||
map.fitBounds(line[last_id].getBounds());
|
||||
} else if (line_predict[last_id]._latlngs.length != 0) {
|
||||
map.fitBounds(line_predict[last_id].getBounds());
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
|
||||
last_data = false;
|
||||
last_id = false;
|
||||
follow = 'marker';
|
||||
|
||||
marker_landing = [];
|
||||
icon_landing = L.divIcon({className: 'leaflet-landing'});
|
||||
dots_predict = [];
|
||||
line_predict = [];
|
||||
marker_burst = [];
|
||||
icon_burst = L.divIcon({className: 'leaflet-burst'});
|
||||
|
||||
marker = [];
|
||||
dots = [];
|
||||
line = [];
|
||||
|
||||
draw = function(data) {
|
||||
var stat;
|
||||
if (data.id) {
|
||||
last_id = data.id;
|
||||
// data.res: 0: ok 1: no rx (timeout), 2: crc err, >2 some other error
|
||||
if ((data.lat && data.lon && data.alt) && (lastframe != 0)) {
|
||||
var location = [data.lat,data.lon,data.alt];
|
||||
if (!marker[data.id]) {
|
||||
map.setView(location, 14);
|
||||
marker[data.id] = L.marker(location).addTo(map)
|
||||
.bindPopup(poptxt('position',data),{closeOnClick:false, autoPan:false}).openPopup();
|
||||
get_predict(data);
|
||||
} else {
|
||||
marker[data.id].slideTo(location, {
|
||||
duration: 500,
|
||||
keepAtCenter: (follow=='marker')?true:false
|
||||
})
|
||||
.setPopupContent(poptxt('position',data));
|
||||
}
|
||||
if (!dots[data.id]) { dots[data.id] = []; }
|
||||
dots[data.id].push(location);
|
||||
if (!line[data.id]) {
|
||||
line[data.id] = L.polyline(dots[data.id]).addTo(map);
|
||||
} else {
|
||||
line[data.id].setLatLngs(dots[data.id]);
|
||||
}
|
||||
|
||||
}
|
||||
if (data.res == 0) {
|
||||
storage_write(data);
|
||||
$('#status').html(greendot);
|
||||
stat = 1;
|
||||
} else {
|
||||
$('#status').html(yellowdot);
|
||||
stat = 0;
|
||||
}
|
||||
headtxt(data,stat);
|
||||
last_data = data;
|
||||
} else {
|
||||
$('#status').html(yellowdot);
|
||||
headtxt(data,0);
|
||||
}
|
||||
};
|
||||
|
||||
|
||||
marker_gps = false;
|
||||
icon_gps = L.divIcon({className: 'leaflet-gps'});
|
||||
circ_gps = false;
|
||||
|
||||
gps = function(e) {
|
||||
gps_location = [e.lat,e.lon];
|
||||
gps_accuracy = e.hdop*2;
|
||||
|
||||
if (last_data && last_data.lat != '0.000000') {
|
||||
if ($('.leaflet-footer').css('display') == 'none') { $('.leaflet-footer').show(); }
|
||||
|
||||
var distance = Math.round(map.distance(gps_location,[last_data.lat, last_data.lon]));
|
||||
distance = (distance > 1000)?(distance / 1000) + 'k':distance;
|
||||
$('.leaflet-footer .gps_dist').html(distance);
|
||||
|
||||
$('.leaflet-footer .gps_dir').html( bearing(gps_location,[last_data.lat, last_data.lon]) );
|
||||
}
|
||||
|
||||
if (!marker_gps) {
|
||||
map.addControl(new L.Control.Button([{ position: 'topleft', text: '🛰️', href: 'javascript:show(marker_gps,\'gps\');' }]));
|
||||
|
||||
marker_gps = L.marker(gps_location,{icon:icon_gps}).addTo(map)
|
||||
.bindPopup(poptxt('gps',e),{closeOnClick:false, autoPan:false});
|
||||
circ_gps = L.circle(gps_location, gps_accuracy).addTo(map);
|
||||
} else {
|
||||
marker_gps.slideTo(gps_location, {
|
||||
duration: 500,
|
||||
keepAtCenter: (follow=='gps')?true:false
|
||||
})
|
||||
.setPopupContent(poptxt('gps',e));
|
||||
circ_gps.slideTo(gps_location, { duration: 500 });
|
||||
circ_gps.setRadius(gps_accuracy);
|
||||
}
|
||||
};
|
||||
|
||||
get_data = function() {
|
||||
$('#status').html(reddot);
|
||||
$.ajax({url: 'live.json', success: (function( data ) {
|
||||
if (typeof data != "object") { data = $.parseJSON(data); }
|
||||
if (data.sonde) {
|
||||
draw(data.sonde);
|
||||
} else {
|
||||
setTimeout(function() {$('#status').html(yellowdot);},100);
|
||||
}
|
||||
if (data.gps) {
|
||||
gps(data.gps);
|
||||
}
|
||||
}),
|
||||
timeout: 1000}
|
||||
);
|
||||
};
|
||||
|
||||
storage = (typeof(Storage) !== "undefined")?true:false;
|
||||
|
||||
settings_std = {
|
||||
burst: 32500,
|
||||
overwrite_descend: 6,
|
||||
overwrite_descend_till: 12000
|
||||
};
|
||||
|
||||
settings_read = function() {
|
||||
if (storage) {
|
||||
if (sessionStorage.settings) {
|
||||
return JSON.parse(sessionStorage.settings);
|
||||
} else {
|
||||
settings_write(settings_std);
|
||||
return settings_std;
|
||||
}
|
||||
} else {
|
||||
return settings_std;
|
||||
}
|
||||
return false;
|
||||
};
|
||||
|
||||
settings_write = function (data) {
|
||||
if (storage) {
|
||||
sessionStorage.settings = JSON.stringify(data);
|
||||
settings = data;
|
||||
}
|
||||
};
|
||||
|
||||
settings = settings_read();
|
||||
|
||||
settings_save = function() {
|
||||
settings.burst = parseInt($('#settings #burst').val());
|
||||
settings.overwrite_descend = parseInt($('#settings #overwrite_descend').val());
|
||||
settings.overwrite_descend_till = parseInt($('#settings #overwrite_descend_till').val());
|
||||
if (Number.isInteger(settings.burst) && Number.isInteger(settings.overwrite_descend) && Number.isInteger(settings.overwrite_descend_till)) {
|
||||
settings_write(settings);
|
||||
$("#settings").slideUp();
|
||||
get_predict(last_data);
|
||||
} else {
|
||||
alert('Error: only numeric values allowed!');
|
||||
}
|
||||
};
|
||||
|
||||
settings_reset = function() {
|
||||
if (confirm('Reset to default?')) {
|
||||
settings_write(settings_std);
|
||||
show_settings();
|
||||
}
|
||||
};
|
||||
|
||||
show_settings = function() {
|
||||
$('#settings #burst').val(settings.burst);
|
||||
$('#settings #overwrite_descend').val(settings.overwrite_descend);
|
||||
$('#settings #overwrite_descend_till').val(settings.overwrite_descend_till);
|
||||
$("#settings").slideToggle();
|
||||
};
|
||||
|
||||
predictor = false;
|
||||
get_predict = function(data) {
|
||||
if (!data) { return; }
|
||||
var ascent = (data.climb > 0)? data.climb : 15;
|
||||
var descent = (data.climb > 0)? settings.overwrite_descend : data.climb * -1;
|
||||
|
||||
var burst;
|
||||
if (data.climb > 0) {
|
||||
burst = (data.alt > settings.burst )?data.alt + 100 : settings.burst;
|
||||
} else {
|
||||
burst = parseInt(data.alt) + 7;
|
||||
if (data.alt > settings.overwrite_descend_till ) { descent = settings.overwrite_descend; }
|
||||
}
|
||||
|
||||
var m = new Date();
|
||||
var datetime = m.getUTCFullYear() + "-" + az(m.getUTCMonth()+1) + "-" + az(m.getUTCDate()) + "T" +
|
||||
az(m.getUTCHours()) + ":" + az(m.getUTCMinutes()) + ":" + az(m.getUTCSeconds()) + "Z";
|
||||
var url = 'https://api.v2.sondehub.org/tawhiri';
|
||||
url += '?launch_latitude='+data.lat + '&launch_longitude='+tawhiri_lon(data.lon);
|
||||
url += '&launch_altitude='+data.alt + '&launch_datetime='+datetime;
|
||||
url += '&ascent_rate='+ascent + '&burst_altitude=' + burst + '&descent_rate='+descent;
|
||||
|
||||
$.getJSON(url, function( prediction ) {
|
||||
draw_predict(prediction,data);
|
||||
});
|
||||
};
|
||||
|
||||
draw_predict = function(prediction,data) {
|
||||
var ascending = prediction.prediction[0].trajectory;
|
||||
var highest = ascending[ascending.length-1];
|
||||
var highest_location = [highest.latitude,sanitize_lon(highest.longitude)];
|
||||
|
||||
var descending = prediction.prediction[1].trajectory;
|
||||
var landing = descending[descending.length-1];
|
||||
var landing_location = [landing.latitude,sanitize_lon(landing.longitude)];
|
||||
|
||||
if (!marker_landing[data.id]) {
|
||||
marker_landing[data.id] = L.marker(landing_location,{icon: icon_landing}).addTo(map)
|
||||
.bindPopup(poptxt('landing',landing),{closeOnClick:false, autoPan:false});
|
||||
} else {
|
||||
marker_landing[data.id].slideTo(landing_location, {
|
||||
duration: 500,
|
||||
keepAtCenter: (follow=='landing')?true:false
|
||||
})
|
||||
.setPopupContent(poptxt('landing',landing));
|
||||
}
|
||||
|
||||
dots_predict[data.id]=[];
|
||||
|
||||
if (data.climb > 0) {
|
||||
ascending.forEach(p => dots_predict[data.id].push([p.latitude,sanitize_lon(p.longitude)]));
|
||||
|
||||
if (!marker_burst[data.id]) {
|
||||
marker_burst[data.id] = L.marker(highest_location,{icon:icon_burst}).addTo(map).bindPopup(poptxt('burst',highest),{closeOnClick:false, autoPan:false});
|
||||
} else {
|
||||
marker_burst[data.id].slideTo(highest_location, {
|
||||
duration: 500,
|
||||
keepAtCenter: (follow=='burst')?true:false
|
||||
}).setPopupContent(poptxt('burst',highest));
|
||||
}
|
||||
}
|
||||
|
||||
descending.forEach(p => dots_predict[data.id].push([p.latitude,sanitize_lon(p.longitude)]));
|
||||
|
||||
if (!line_predict[data.id]) {
|
||||
line_predict[data.id] = L.polyline(dots_predict[data.id],{color: 'yellow'}).addTo(map);
|
||||
} else {
|
||||
line_predict[data.id].setLatLngs(dots_predict[data.id]);
|
||||
}
|
||||
|
||||
if (data.climb > 0) {
|
||||
predictor_time = 5 * 60; // ascending, every 5 min
|
||||
} else if (data.climb < 0 && data.alt > 5000) {
|
||||
predictor_time = 2 * 60; // descending, above 5km, every 2 min
|
||||
} else {
|
||||
predictor_time = 30; // descending, below 5km, every 30 sec
|
||||
}
|
||||
clearTimeout(predictor);
|
||||
predictor = setTimeout(function() {get_predict(last_data);}, predictor_time*1000);
|
||||
};
|
||||
|
||||
sanitize_lon = function(lon) {
|
||||
if (lon > 180) { return lon - 360; }
|
||||
return lon;
|
||||
}
|
||||
tawhiri_lon = function(lon) {
|
||||
if (lon < 0) { return lon + 360; }
|
||||
return lon;
|
||||
}
|
||||
|
||||
poptxt = function(t,i) {
|
||||
var lat_input = (i.id)?i.lat:i.latitude;
|
||||
var lon_input = sanitize_lon((i.id)?i.lon:i.longitude);
|
||||
|
||||
var lat = Math.round(lat_input * 1000000) / 1000000;
|
||||
var lon = Math.round(lon_input * 1000000) / 1000000;
|
||||
|
||||
var add =
|
||||
'<br /><b>Position:</b> '+lat+', '+lon+'<br />'+
|
||||
'<b>Open:</b> <a href="https://www.google.de/maps/?q='+lat+', '+lon+'" target="_blank">GMaps</a> | <a href="https://www.openstreetmap.org/?mlat='+lat+'&mlon='+lon+'&zoom=15" target="_blank">OSM</a> | <a href="geo://'+lat+','+lon+'">GeoApp</a>';
|
||||
|
||||
if (t == 'position') { return '<div class="i_position"><b>🎈 '+i.id+'</b>'+add+'</div>'; }
|
||||
if (t == 'burst') { return '<div class="i_burst"><b>💥 Predicted Burst:</b><br />'+fd(i.datetime)+' in '+mr(i.altitude)+'m'+add+'</div>'; }
|
||||
if (t == 'highest') { return '<div class="i_burst"><b>💥 Burst:</b> '+mr(i.altitude)+'m'+add+'</div>';}
|
||||
if (t == 'landing') { return '<div class="i_landing"><b>🎯 Predicted Landing:</b><br />'+fd(i.datetime)+' at '+mr(i.altitude)+'m'+add+'</div>'; }
|
||||
if (t == 'gps') { return '<div class="i_gps">Position: '+(i.lat)+','+(i.lon)+'<br />Altitude: '+i.alt+'m<br />Speed: '+mr(i.speed * 3.6 * 10)/10+'km/h '+i.dir+'°<br />Sat: '+i.sat+' Hdop:'+(i.hdop/10)+'</div>'; }
|
||||
};
|
||||
|
||||
fd = function(date) {
|
||||
var d = new Date(Date.parse(date));
|
||||
return az(d.getUTCHours()) +':'+ az(d.getUTCMinutes())+' UTC';
|
||||
};
|
||||
az = function(n) { return (n<10)?'0'+n:n; };
|
||||
mr = function(n) { return Math.round(n); };
|
||||
|
||||
storage = (typeof(Storage) !== "undefined")?true:false;
|
||||
storage_write = function (data) {
|
||||
if (storage) {
|
||||
if (sessionStorage.sonde) {
|
||||
storage_data = JSON.parse(sessionStorage.sonde);
|
||||
} else {
|
||||
storage_data = [];
|
||||
}
|
||||
if (JSON.stringify(data) != JSON.stringify(storage_data[storage_data.length - 1])) {
|
||||
storage_data.push(data);
|
||||
sessionStorage.sonde = JSON.stringify(storage_data);
|
||||
}
|
||||
}
|
||||
};
|
||||
|
||||
storage_read = function() {
|
||||
if (storage) {
|
||||
if (sessionStorage.sonde) {
|
||||
storage_data = JSON.parse(sessionStorage.sonde);
|
||||
return storage_data;
|
||||
}
|
||||
}
|
||||
return false;
|
||||
};
|
||||
|
||||
storage_remove = function() {
|
||||
sessionStorage.removeItem('sonde');
|
||||
};
|
||||
|
||||
session_storage = storage_read();
|
||||
if (session_storage) {
|
||||
session_storage.forEach(function(d) {
|
||||
dots.push([d.lat,d.lon,d.alt]);
|
||||
session_storage_last = d;
|
||||
});
|
||||
draw(session_storage_last);
|
||||
}
|
||||
|
||||
setInterval(get_data,1000);
|
||||
|
||||
});
|
||||
|
||||
L.Control.Button = L.Control.extend({
|
||||
onAdd: function (map) {
|
||||
var container = L.DomUtil.create('div', 'leaflet-bar leaflet-control');
|
||||
options = this.options;
|
||||
Object.keys(options).forEach(function(key) {
|
||||
this.link = L.DomUtil.create('a', '', container);
|
||||
this.link.text = options[key].text;
|
||||
this.link.href = options[key].href;
|
||||
this.link.id = options[key].id;
|
||||
});
|
||||
|
||||
this.options.position = this.options[0].position;
|
||||
return container;
|
||||
}
|
||||
});
|
||||
|
||||
|
||||
// https://github.com/makinacorpus/Leaflet.GeometryUtil/blob/master/src/leaflet.geometryutil.js#L682
|
||||
// modified to fit
|
||||
function bearing(latlng1, latlng2) {
|
||||
var rad = Math.PI / 180,
|
||||
lat1 = latlng1[0] * rad,
|
||||
lat2 = latlng2[0] * rad,
|
||||
lon1 = latlng1[1] * rad,
|
||||
lon2 = latlng2[1] * rad,
|
||||
y = Math.sin(lon2 - lon1) * Math.cos(lat2),
|
||||
x = Math.cos(lat1) * Math.sin(lat2) -
|
||||
Math.sin(lat1) * Math.cos(lat2) * Math.cos(lon2 - lon1);
|
||||
var bearing = ((Math.atan2(y, x) * 180 / Math.PI) + 360) % 360;
|
||||
bearing = bearing < 0 ? bearing-360 : bearing;
|
||||
return Math.round(bearing);
|
||||
}
|
||||
@@ -0,0 +1,25 @@
|
||||
<html>
|
||||
<head>
|
||||
<script>
|
||||
maptype = "SH"; // TODO: Get from config
|
||||
|
||||
const maps = {
|
||||
"WS": ["https://www.wettersonde.net/map.php", (s)=>"?sonde="+s, (lat,lon)=>""],
|
||||
"SH": ["https://sondehub.org/#!mt=Mapnik", (lat,lon)=>'&mz=7&qm=12h&mc=' + lat + ',' + lon],
|
||||
"RS": ["https://radiosondy.info/", (s)=>"sonde.php?sondenumber="+s, (lat,lon)=>""],
|
||||
"OW": ["https://v2.openwx.de/start.php", (s)=>"?sonde="+s, (lat,lon)=>"?mode=mobile"],
|
||||
};
|
||||
|
||||
|
||||
const data = {"gps_lat":45.62172,"gps_lon":7.02026};
|
||||
|
||||
urlarg = + maps[maptype][1] + data['gps_lat']+","+data['gps_lon'];
|
||||
|
||||
iftxt='<iframe src="' + maps[maptype][0] + urlarg +'" style="border:1px solid #00A3D3;border-radius:20px;height:98vh;width:100%"></iframe>';
|
||||
document.write(iftxt);
|
||||
document.getElementsByTagName('body')[0].innerHTML = iftxt;
|
||||
</script>
|
||||
</head>
|
||||
<body>
|
||||
</body>
|
||||
</html>
|
||||
Executable
+6
@@ -0,0 +1,6 @@
|
||||
Radiosonde
|
||||
Radiosonde
|
||||
Terreandro
|
||||
terrexavier
|
||||
TERREWIFI
|
||||
terrexavier
|
||||
@@ -0,0 +1,26 @@
|
||||
# Frequency in Mhz (format nnn.nnn)
|
||||
# Type (4=RS41, R=RS92, D=DFM (automated normal/inverted), M=M10/M20, 3=MP3H)
|
||||
# (older versions: 6=DFM6, 9=DFM9, now both treated the same as D)
|
||||
# (older versions: M=M10, 2=M20, now both treaded the same: automated M10/M20 decoding)
|
||||
# +: active, -: not active
|
||||
#
|
||||
400.000 9 + Test(FR)
|
||||
402.000 2 + Nimes(FR)
|
||||
402.800 4 + Cuneo(IT)
|
||||
403.000 6 - Ajactio(FR)
|
||||
403.200 M - OHP(FR)
|
||||
403.010 6 - Canjuers(FR)
|
||||
404.200 4 - Rome(IT)
|
||||
404.789 9 - Frejus1(FR)
|
||||
404.800 4 - Milan(IT)
|
||||
405.000 R - Frejus2(FR)
|
||||
405.789 9 - Pegomas(FR)
|
||||
403.700 4 - Cuneo2(IT)
|
||||
400.000 D -
|
||||
400.000 D -
|
||||
400.000 D -
|
||||
400.000 D -
|
||||
400.000 D -
|
||||
400.000 D -
|
||||
400.000 D -
|
||||
# end
|
||||
@@ -0,0 +1,54 @@
|
||||
let stypes=new Map();
|
||||
stypes.set('4', 'RS41');
|
||||
stypes.set('R', 'RS92');
|
||||
stypes.set('D', 'DFM');
|
||||
stypes.set('M', 'M10/M20');
|
||||
stypes.set('3', 'MP3H');
|
||||
|
||||
function footer() {
|
||||
document.addEventListener("DOMContentLoaded", function(){
|
||||
var form = document.querySelector(".wrapper");
|
||||
form.addEventListener("input", function() {
|
||||
document.querySelector(".save").disabled = false;
|
||||
});
|
||||
document.querySelector(".save").disabled = true;
|
||||
});
|
||||
}
|
||||
|
||||
/* Used by qrg.html in RX_FSK.ino */
|
||||
function prep() {
|
||||
var stlist=document.querySelectorAll("input.stype");
|
||||
for(txt of stlist){
|
||||
var val=txt.getAttribute('value'); var nam=txt.getAttribute('name');
|
||||
if(val=='2') { val='M'; }
|
||||
var sel=document.createElement('select');
|
||||
sel.setAttribute('name',nam);
|
||||
for(stype of stypes) {
|
||||
var opt=document.createElement('option');
|
||||
opt.value=stype[0];
|
||||
opt.innerHTML=stype[1];
|
||||
if(stype[0]==val) { opt.setAttribute('selected','selected'); }
|
||||
sel.appendChild(opt);
|
||||
}
|
||||
txt.replaceWith(sel);
|
||||
}
|
||||
}
|
||||
|
||||
function qrgTable() {
|
||||
var tab=document.getElementById("divTable");
|
||||
|
||||
var table = "<table><tr><th>Ch</th><th>Active</th><th>Frequency</th><th>Decoder</th><th>Launchsite</th></tr>";
|
||||
for(i=0; i<qrgs.length; i++) {
|
||||
var ck = "";
|
||||
if(qrgs[i][0]) ck="checked";
|
||||
table += "<tr><td class=\"ch\">" + (i+1) + "</td><td class=\"act\"><input name=\"A" + (i+1) + "\" type=\"checkbox\" " + ck + "/></td>";
|
||||
table += "<td><input name=\"F" + (i+1) + "\" type=\"text\" size=7 value=\"" + qrgs[i][1] + "\"></td>";
|
||||
table += "<td><input class=\"stype\" name=\"T" + (i+1) + "\" value=\"" + qrgs[i][3] + "\"></td>";
|
||||
table += "<td><input name=\"S" + (i+1) + "\" type=\"text\" value=\"" + qrgs[i][2] +"\"></td></tr>";
|
||||
}
|
||||
table += "</table>";
|
||||
tab.innerHTML = table;
|
||||
prep();
|
||||
footer();
|
||||
}
|
||||
|
||||
@@ -0,0 +1,460 @@
|
||||
# Definition of display content and action behaviour
|
||||
#
|
||||
# Timer: (view timer, rx timer, norx timer)
|
||||
# - value -1: timer is disabled; value>=0: timer fires after (value) seconds
|
||||
# - view timer: time since current view (display mode and sonde) was started
|
||||
# - rx timer: time since when sonde data has been received continuously (trigger immediatly after RX)
|
||||
# - norx timer: time since when no sonde data has been received continuously
|
||||
# (rx and norx timer is started after tuning a new frequency and receiving a signal or not receiving
|
||||
# anything for a 1s period)
|
||||
#
|
||||
# Actions:
|
||||
# - W: activate WiFi scan
|
||||
# - F: activate frequency spectrum display
|
||||
# - 0: activate "Scan:" display (this is basically just display mode 0)
|
||||
# - x: (1..N): activate display mode x [deprecated]
|
||||
# - >: activate next display mode
|
||||
# - D: activate default receiver display (display mode specified in config)
|
||||
# - +: advance to next active sonde from QRG config
|
||||
# - #: no action
|
||||
#
|
||||
# Display content (lower/upper case: small/large font)
|
||||
# line,column=content
|
||||
# for ILI9225 its also possible to indicate
|
||||
# line,column,width=content for text within a box of width 'width'
|
||||
# line,column,-width=content for right-justified text
|
||||
#
|
||||
# XText : Text
|
||||
# F(suffix): frequency (with suffix, e.g., " MHz")
|
||||
# L latitade
|
||||
# O lOngitute
|
||||
# A altitude
|
||||
# Hm(suffix) hor. speed m/s (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Hk(suffix) hor. speed km/h (suffix: e.g. "km/h"; no suffix=>km/h as 16x8 bitmap for SSD1306 display only)
|
||||
# V(suffix) vert. speef (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Ix sonde ID (default/d: dxlaprs; s: short id, n: real serial number)
|
||||
# RS41,RS92: all identical R1234567
|
||||
# DFMx: ID M12345678; short ID and serial 12345678
|
||||
# M10: ID ME95231F0; short ID: M95231F0; serial 9062104592
|
||||
# Q signal quality statistics bar
|
||||
# T type string (RS41/DFM9/DFM6/RS92)
|
||||
# C afC value
|
||||
# N ip address (only tiny font)
|
||||
# S scan list entry info: l/empty: launch site name, #=entry nr, t=total entries, a=active entries, /: #/t
|
||||
# K RS41 kill timer values: Kl launch timer, Kb burst timer, Kc kill countdown
|
||||
# format: K_4: h:mm k_6: h:mm:ss k_s: sssss, nothing shown for other sonde
|
||||
# Mx telemetry value x (t temp p preassure h hyg) [not yet implemented, maybe some day in future]
|
||||
# Gx GPS-related data
|
||||
# raw data from GPS: GA, GO, GH, GC: LAtitude, lOngitude, Altutide(Height), Course over ground
|
||||
# relative to sonde: GD, GI, GB: Distance, dIrection (absolute), relative Bearing
|
||||
# G0 GPS circle diagram e.g. 3,5=g0NCS,50,ff0000,000033,5,ffff00,4,ffffff
|
||||
# "N" (what is on top: N=north C=course)
|
||||
# "C" (where does the arrow point to: C=course, S=sonde)
|
||||
# "S" (what is shown by the bullet: C=course, S=sonde)
|
||||
# 50: circle radius, followed by fg and bg color
|
||||
# 5: bullet radius, followed by fg color
|
||||
# 4: arrow width, followed by fg color
|
||||
# R RSSI
|
||||
# B battery(T-Beam 1.0) S=status V=Batt.Volt C=charge current D=discharge current
|
||||
# U=USB volt I=USB current T=IC temp
|
||||
#
|
||||
# fonts=x,y can be used to select font (x=small, y=large) for all items below
|
||||
# for SSD1306, x and y can be used to select one of those fonts:
|
||||
# (y should be a 1x2 font (1,5,6,7), x a small font)
|
||||
# u8x8_font_chroma48medium8_r, // 0 ** default small
|
||||
# u8x8_font_7x14_1x2_f, // 1 ** default large
|
||||
# u8x8_font_amstrad_cpc_extended_f, // 2
|
||||
# u8x8_font_5x7_f, // 3
|
||||
# u8x8_font_5x8_f, // 4
|
||||
# u8x8_font_8x13_1x2_f, // 5
|
||||
# u8x8_font_8x13B_1x2_f, // 6
|
||||
# u8x8_font_7x14B_1x2_f, // 7
|
||||
# u8x8_font_artossans8_r, // 8
|
||||
# u8x8_font_artosserif8_r, // 9
|
||||
# u8x8_font_torussansbold8_r, // 10
|
||||
# u8x8_font_victoriabold8_r, // 11
|
||||
# u8x8_font_victoriamedium8_r, // 12
|
||||
# u8x8_font_pressstart2p_f, // 13
|
||||
# u8x8_font_pcsenior_f, // 14
|
||||
# u8x8_font_pxplusibmcgathin_f, // 15
|
||||
# u8x8_font_pxplusibmcga_f, // 16
|
||||
# u8x8_font_pxplustandynewtv_f, // 17
|
||||
#
|
||||
# for ILI9225, these fonts are available:
|
||||
# Terminal6x8 // 0
|
||||
# Terminal11x16 // 1
|
||||
# Terminal12x16 // 2
|
||||
# FreeMono9pt7b, // 3
|
||||
# FreeMono12pt7b, // 4
|
||||
# FreeSans9pt7b, // 5
|
||||
# FreeSans12pt7b, // 6
|
||||
# Picopixel, // 7
|
||||
#
|
||||
# color=rrggbb,rrggbb can be used to select color (foreground, background)
|
||||
# see https://github.com/Nkawu/TFT_22_ILI9225/wiki#color-reference for example (use without "#"-sign)
|
||||
#
|
||||
# for TFT display, coordinates and width are multiplied by xscale,yscale and later used in pixels
|
||||
# with scale=1,1 you can directly use pixel coordinates. (default: xscale=13,yscale=22 => 8 lines, 16 columns)
|
||||
###########
|
||||
#
|
||||
# Default configuration for "Scanner" display:
|
||||
# - view timer disabled; rx timer=0; norx timer = 0
|
||||
# => after 1 second immediately an action is triggered
|
||||
# (norx: go to next sonde; rx: go to default receiver display)
|
||||
# - key1 actions: D,0,F,W
|
||||
# => Button press activates default receiver view, double press does nothing
|
||||
# Mid press activates Spectrum display, long press activates Wifi scan
|
||||
# - key2 has no function
|
||||
@Scanner
|
||||
timer=-1,0,0
|
||||
key1action=D,#,F,W
|
||||
key2action=#,#,#,#
|
||||
timeaction=#,D,+
|
||||
0,0=XScan
|
||||
0,5=S#:
|
||||
0,9=T
|
||||
3,0=F MHz
|
||||
5,0=S
|
||||
7,5=n
|
||||
|
||||
############
|
||||
# Default configuration for "Legacy" display:
|
||||
# - view timer=-1, rx timer=-1 (disabled); norx timer=20 (or -1 for "old" behaviour)
|
||||
# => norx timer fires after not receiving a singla for 20 seconds
|
||||
# - key1 actions: +,0,F,W
|
||||
# => Button1 press: next sonde; double press => @Scanner display
|
||||
# => Mid press activates Spectrum display, long press activates Wifi scan
|
||||
# - key2 actions: 2,#,#,#
|
||||
# => BUtton2 activates display 2 (@Field)
|
||||
# - timer actions: #,#,0
|
||||
# (norx timer: if no signal for >20 seconds: go back to scanner mode)
|
||||
#
|
||||
@Legacy
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
0,5=f MHz
|
||||
1,8=c
|
||||
0,0=t
|
||||
1,0=is
|
||||
2,0=L
|
||||
4,0=O
|
||||
2,10=a
|
||||
3,10=h
|
||||
4,9=v
|
||||
6,0=R
|
||||
6,7=Q
|
||||
|
||||
############
|
||||
# Configuratoon for "Field" display (display 2)
|
||||
# similar to @Legacy, but no norx timer, and Key2 goes to display 4
|
||||
@Field
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
2,0=L
|
||||
4,0=O
|
||||
3,10=h
|
||||
4,9=v
|
||||
0,0=Is
|
||||
6,0=A
|
||||
6,7=Q
|
||||
|
||||
############
|
||||
# Configuration for "Field2" display (display 3)
|
||||
# similar to @Field
|
||||
@Field2
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
2,0=L
|
||||
4,0=O
|
||||
1,12=t
|
||||
0,9=f
|
||||
3,10=h
|
||||
4,9=v
|
||||
0,0=Is
|
||||
6,0=A
|
||||
6,7=Q
|
||||
|
||||
#############
|
||||
# Configuration for "GPS" display
|
||||
# not yet the final version, just for testing
|
||||
@GPSDIST
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
0,0=Is
|
||||
0,9=f
|
||||
1,12=t
|
||||
2,0=L
|
||||
4,0=O
|
||||
2,10=a
|
||||
3,10=h
|
||||
4,9=v
|
||||
5,9=gC
|
||||
5,13=gB
|
||||
6,7=Q
|
||||
7,0=gV
|
||||
7,2=xd=
|
||||
7,4=gD
|
||||
7,12=gI°
|
||||
|
||||
############
|
||||
# Scan display for large 2" TFT dispaly
|
||||
@ScannerTFT
|
||||
timer=-1,0,0
|
||||
key1action=D,#,F,W
|
||||
key2action=#,#,#,#
|
||||
timeaction=#,D,+
|
||||
fonts=5,6
|
||||
0,0=XScan
|
||||
0,8,-3=S#:
|
||||
0,9,5=T
|
||||
3,0=F MHz
|
||||
5,0,16=S
|
||||
7,5=n
|
||||
|
||||
############
|
||||
@MainTFT
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
color=FFD700
|
||||
0,0=Is
|
||||
color=0000FF
|
||||
0,11,-5.5=f
|
||||
1,1,6=c
|
||||
1,12.5,-4=t
|
||||
color=00ff00
|
||||
2,0=L
|
||||
4,0=O
|
||||
color=FFA500
|
||||
2,9.5,-7=A
|
||||
3,9.5,-7=vm/s
|
||||
color=AA5522
|
||||
4,9.5,-7=hkkm/h
|
||||
color=FFFFFF
|
||||
6,2=r
|
||||
7,0=xd=
|
||||
7,2,6=gD
|
||||
7,12=gI
|
||||
|
||||
############
|
||||
@PeilungTFT
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
color=ffff00,000033
|
||||
color=bbbbbb,000000
|
||||
0,2=xN Top:
|
||||
0,8=xCourse Top:
|
||||
color=ffff00,000033
|
||||
1,0=g0NCS,48,ffff00,000044,6,33ff33,5,eeaa00
|
||||
1,8=g0CCS,48,ffff00,000044,6,55ff55,5,eeaa00
|
||||
color=ffffff,000000
|
||||
6,0=xDirection:
|
||||
6,8,4=gI
|
||||
7,0=xCOG:
|
||||
7,4,4=gC
|
||||
7,8=xturn:
|
||||
7,12,4=gB
|
||||
|
||||
|
||||
############
|
||||
@GPSdataTFT
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
0,0=xOn-board GPS:
|
||||
1,0,8=gA
|
||||
2,0,8=gO
|
||||
3,0,8=gH
|
||||
4,0,8=gC
|
||||
5,0=xGPS vs Sonde:
|
||||
6,0,8=gD
|
||||
7,0,8=gI
|
||||
7,8,8=gB
|
||||
|
||||
############
|
||||
@BatteryTFT
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
0,0=xBattery status:
|
||||
0,14=bS
|
||||
1,0=xBatt:
|
||||
1,5,5=bVV
|
||||
2,0,16=bCmA(charging)
|
||||
3,0,16=bDmA(discharging)
|
||||
4.4,0=xUSB:
|
||||
4.4,5,5=bUV
|
||||
5.4,0,10=bImA
|
||||
6.4,0=xTemp:
|
||||
6.4,5,5=bT C
|
||||
|
||||
############
|
||||
@BatteryOLED
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=xBat.Status:
|
||||
0,12=bS
|
||||
1,0=xBatt:
|
||||
1,6=bVV
|
||||
2,0=bCmA (charge)
|
||||
3,0=bDmA (disch.)
|
||||
4,0=xUSB:
|
||||
4,5=bUV
|
||||
5,5=bImA
|
||||
6,0=xTemp:
|
||||
6,5=bT C
|
||||
|
||||
### Alternative display layouts based on https://gist.github.com/bazjo
|
||||
# Scan display for large 2" TFT dispaly
|
||||
@Scan.TFT.Bazjo
|
||||
timer=-1,0,0
|
||||
key1action=D,#,F,W
|
||||
key2action=#,#,#,#
|
||||
timeaction=#,D,+
|
||||
scale=11,10
|
||||
fonts=0,2
|
||||
color=e0e0e0
|
||||
#Row 1
|
||||
0.5,0=XScanning...
|
||||
#Row 2
|
||||
3,0=xIndex
|
||||
4,0=S/
|
||||
3,9=xSite
|
||||
4,9=S
|
||||
#Row 3
|
||||
6,0=xType
|
||||
7,0=T
|
||||
6,9=xFrequency
|
||||
7,9=F
|
||||
#Row 4
|
||||
9,0=xWeb UI IP
|
||||
10,0=N
|
||||
#Row 5
|
||||
#Footer
|
||||
color=6C757D
|
||||
15,0=xScan Mode
|
||||
15,18=bVV
|
||||
|
||||
############
|
||||
@Decode/General.TFT.Bazjo
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
scale=11,10
|
||||
fonts=0,2
|
||||
#Row 1
|
||||
color=996A06
|
||||
0,0=xSerial
|
||||
0,5=t
|
||||
color=FFB10B
|
||||
1,0=Is
|
||||
color=996A06
|
||||
0,11=xFreq.
|
||||
0,16=c
|
||||
color=FFB10B
|
||||
1,11=F
|
||||
#Row 2
|
||||
color=3C5C99
|
||||
3,0=xLatitude
|
||||
color=639AFF
|
||||
4,0=L
|
||||
color=3C5C99
|
||||
3,11=xLongitude
|
||||
color=639AFF
|
||||
4,11=O
|
||||
#Row 3
|
||||
color=3C5C99
|
||||
6,0=xHoriz. Speed
|
||||
color=639AFF
|
||||
7,0=Hkkm/h
|
||||
color=3C5C99
|
||||
6,11=xVert. Speed
|
||||
color=639AFF
|
||||
7,11=Vm/s
|
||||
#Row 4
|
||||
color=99004A
|
||||
9,0=xAltitude
|
||||
color=FF007B
|
||||
10,0=A
|
||||
color=99004A
|
||||
9,11=xBearing
|
||||
color=FF007B
|
||||
10,11=GB
|
||||
#Row 5
|
||||
color=06998E
|
||||
12,0=xRSSI
|
||||
color=0AFFEF
|
||||
13,0=R
|
||||
color=06998E
|
||||
12,11=xHistory
|
||||
color=0AFFEF
|
||||
13.5,11=Q4
|
||||
#Footer
|
||||
color=6C757D
|
||||
15,0=xDecode Mode / General View
|
||||
15,18=bVV
|
||||
|
||||
|
||||
############
|
||||
@Decode/Battery.TFT.Bazjo
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
scale=11,10
|
||||
fonts=0,2
|
||||
#Row 1
|
||||
color=99001F
|
||||
0,0=xBattery Status
|
||||
0,11=xBattery Voltage
|
||||
color=FF0035
|
||||
1,0=BS
|
||||
1,11=BVV
|
||||
#Row 2
|
||||
color=99001F
|
||||
3,0=xCharge Current
|
||||
3,11=xDischarge Current
|
||||
color=FF0035
|
||||
4,0=BCmA
|
||||
4,11=BDmA
|
||||
#Row 3
|
||||
color=99001F
|
||||
6,0=xUSB Voltage
|
||||
6,11=xUSB Current
|
||||
color=FF0035
|
||||
7,0=BUV
|
||||
7,11=BImA
|
||||
#Row 4
|
||||
color=99001F
|
||||
9,0=xIC Temperature
|
||||
#9,11=xKey
|
||||
color=FF0035
|
||||
10,0=BTC
|
||||
#10,11=XValue
|
||||
#Row 5
|
||||
#12,0=xKey
|
||||
#12,11=xKey
|
||||
#13,0=XValue
|
||||
#13,11=XValue
|
||||
#Footer
|
||||
color=99001F
|
||||
15,0=xDecode Mode/Battery View
|
||||
15,18=bVV
|
||||
|
||||
@@ -0,0 +1,267 @@
|
||||
### screens1.txt: OLED display
|
||||
# Definition of display content and action behaviour
|
||||
#
|
||||
# Timer: (view timer, rx timer, norx timer)
|
||||
# - value -1: timer is disabled; value>=0: timer fires after (value) seconds
|
||||
# - view timer: time since current view (display mode and sonde) was started
|
||||
# - rx timer: time since when sonde data has been received continuously (trigger immediatly after RX)
|
||||
# - norx timer: time since when no sonde data has been received continuously
|
||||
# (rx and norx timer is started after tuning a new frequency and receiving a signal or not receiving
|
||||
# anything for a 1s period)
|
||||
#
|
||||
# Actions:
|
||||
# - W: activate WiFi scan
|
||||
# - F: activate frequency spectrum display
|
||||
# - 0: activate "Scan:" display (this is basically just display mode 0)
|
||||
# - x: (1..N): activate display mode x [deprecated]
|
||||
# - >: activate next display mode
|
||||
# - D: activate default receiver display (display mode specified in config)
|
||||
# - +: advance to next active sonde from QRG config
|
||||
# - #: no action
|
||||
#
|
||||
# Display content (lower/upper case: small/large font)
|
||||
# line,column=content
|
||||
# for ILI9225 its also possible to indicate
|
||||
# line,column,width=content for text within a box of width 'width'
|
||||
# line,column,-width=content for right-justified text
|
||||
#
|
||||
# XText : Text
|
||||
# F(suffix): frequency (with suffix, e.g., " MHz")
|
||||
# L latitade
|
||||
# O lOngitute
|
||||
# A altitude
|
||||
# Hm(suffix) hor. speed m/s (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Hk(suffix) hor. speed km/h (suffix: e.g. "km/h"; no suffix=>km/h as 16x8 bitmap for SSD1306 display only)
|
||||
# V(suffix) vert. speef (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Ix sonde ID (default/d: dxlaprs; s: short id, n: real serial number)
|
||||
# RS41,RS92: all identical R1234567
|
||||
# DFMx: ID M12345678; short ID and serial 12345678
|
||||
# M10: ID ME95231F0; short ID: M95231F0; serial 9062104592
|
||||
# Q signal quality statistics bar
|
||||
# T type string (RS41/DFM9/DFM6/RS92)
|
||||
# C afC value
|
||||
# N ip address (only tiny font)
|
||||
# S scan list entry info: l/empty: launch site name, #=entry nr, t=total entries, a=active entries, /: #/t
|
||||
# K RS41 kill timer values: Kl launch timer, Kb burst timer, Kc kill countdown
|
||||
# format: K_4: h:mm k_6: h:mm:ss k_s: sssss, nothing shown for other sonde
|
||||
# Mx telemetry value x (t temp p preassure h hyg b battery)
|
||||
# Gx GPS-related data
|
||||
# raw data from GPS: GA, GO, GH, GC: LAtitude, lOngitude, Altutide(Height), Course over ground
|
||||
# relative to sonde: GD, GI, GB: Distance, dIrection (absolute), relative Bearing
|
||||
# G0 GPS circle diagram e.g. 3,5=g0NCS,50,ff0000,000033,5,ffff00,4,ffffff
|
||||
# "N" (what is on top: N=north C=course)
|
||||
# "C" (where does the arrow point to: C=course, S=sonde)
|
||||
# "S" (what is shown by the bullet: C=course, S=sonde)
|
||||
# 50: circle radius, followed by fg and bg color
|
||||
# 5: bullet radius, followed by fg color
|
||||
# 4: arrow width, followed by fg color
|
||||
# R RSSI
|
||||
# B battery(T-Beam 1.0) S=status V=Batt.Volt C=charge current D=discharge current
|
||||
# U=USB volt I=USB current T=IC temp
|
||||
#
|
||||
# fonts=x,y can be used to select font (x=small, y=large) for all items below
|
||||
# for SSD1306, x and y can be used to select one of those fonts:
|
||||
# (y should be a 1x2 font (1,5,6,7), x a small font)
|
||||
# u8x8_font_chroma48medium8_r, // 0 ** default small
|
||||
# u8x8_font_7x14_1x2_f, // 1 ** default large
|
||||
# u8x8_font_amstrad_cpc_extended_f, // 2
|
||||
# u8x8_font_5x7_f, // 3
|
||||
# u8x8_font_5x8_f, // 4
|
||||
# u8x8_font_8x13_1x2_f, // 5
|
||||
# u8x8_font_8x13B_1x2_f, // 6
|
||||
# u8x8_font_7x14B_1x2_f, // 7
|
||||
# u8x8_font_artossans8_r, // 8
|
||||
# u8x8_font_artosserif8_r, // 9
|
||||
# u8x8_font_torussansbold8_r, // 10
|
||||
# u8x8_font_victoriabold8_r, // 11
|
||||
# u8x8_font_victoriamedium8_r, // 12
|
||||
# u8x8_font_pressstart2p_f, // 13
|
||||
# u8x8_font_pcsenior_f, // 14
|
||||
# u8x8_font_pxplusibmcgathin_f, // 15
|
||||
# u8x8_font_pxplusibmcga_f, // 16
|
||||
# u8x8_font_pxplustandynewtv_f, // 17
|
||||
#
|
||||
# for ILI9225, these fonts are available:
|
||||
# Terminal6x8 // 0
|
||||
# Terminal11x16 // 1
|
||||
# Terminal12x16 // 2
|
||||
# FreeMono9pt7b, // 3
|
||||
# FreeMono12pt7b, // 4
|
||||
# FreeSans9pt7b, // 5
|
||||
# FreeSans12pt7b, // 6
|
||||
# Picopixel, // 7
|
||||
#
|
||||
# color=rrggbb,rrggbb can be used to select color (foreground, background)
|
||||
# see https://github.com/Nkawu/TFT_22_ILI9225/wiki#color-reference for example (use without "#"-sign)
|
||||
#
|
||||
# for TFT display, coordinates and width are multiplied by xscale,yscale and later used in pixels
|
||||
# with scale=1,1 you can directly use pixel coordinates. (default: xscale=13,yscale=22 => 8 lines, 16 columns)
|
||||
###########
|
||||
#
|
||||
# Default configuration for "Scanner" display:
|
||||
# - view timer disabled; rx timer=0; norx timer = 0
|
||||
# => after 1 second immediately an action is triggered
|
||||
# (norx: go to next sonde; rx: go to default receiver display)
|
||||
# - key1 actions: D,0,F,W
|
||||
# => Button press activates default receiver view, double press does nothing
|
||||
# Mid press activates Spectrum display, long press activates Wifi scan
|
||||
# - key2 has no function
|
||||
@Scanner
|
||||
timer=-1,0,0
|
||||
key1action=D,#,F,W
|
||||
key2action=D,#,#,#
|
||||
timeaction=#,D,+
|
||||
0,0=XScan
|
||||
0,5=S#:
|
||||
0,9=T
|
||||
3,0=F MHz
|
||||
5,0,16=S
|
||||
7,0=bVV
|
||||
#7,0=gV
|
||||
7,5=n
|
||||
|
||||
############
|
||||
# Default configuration for "Legacy" display:
|
||||
# - view timer=-1, rx timer=-1 (disabled); norx timer=20 (or -1 for "old" behaviour)
|
||||
# => norx timer fires after not receiving a singla for 20 seconds
|
||||
# - key1 actions: +,0,F,W
|
||||
# => Button1 press: next sonde; double press => @Scanner display
|
||||
# => Mid press activates Spectrum display, long press activates Wifi scan
|
||||
# - key2 actions: 2,#,#,#
|
||||
# => BUtton2 activates display 2 (@Field)
|
||||
# - timer actions: #,#,0
|
||||
# (norx timer: if no signal for >20 seconds: go back to scanner mode)
|
||||
#
|
||||
@Legacy
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
0,5=f MHz
|
||||
1,8=c
|
||||
0,0=t
|
||||
1,0=is
|
||||
2,0=L
|
||||
4,0=O
|
||||
2,10=a
|
||||
3,10=h
|
||||
4,9=v
|
||||
6,0=R
|
||||
6,7=Q
|
||||
|
||||
############
|
||||
# Configuratoon for "Field" display (display 2)
|
||||
# similar to @Legacy, but no norx timer, and Key2 goes to display 4
|
||||
@Field
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
2,0=L
|
||||
4,0=O
|
||||
3,10=h
|
||||
4,9=v
|
||||
0,0=Is
|
||||
6,0=A
|
||||
6,7=Q
|
||||
|
||||
############
|
||||
# Configuration for "Field2" display (display 3)
|
||||
# similar to @Field
|
||||
@Field2
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
2,0=L
|
||||
4,0=O
|
||||
1,12=t
|
||||
0,9=f
|
||||
3,10=h
|
||||
4,9=v
|
||||
0,0=Is
|
||||
6,0=A
|
||||
6,7=Q
|
||||
|
||||
#############
|
||||
# Configuration for "GPS" display
|
||||
# not yet the final version, just for testing
|
||||
@GPSDIST
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
0,0=Is
|
||||
0,9=f
|
||||
1,12=t
|
||||
2,0=L
|
||||
4,0=O
|
||||
2,10=a
|
||||
3,10=h
|
||||
4,9=v
|
||||
5,9=gC
|
||||
5,13=gB
|
||||
6,7=Q
|
||||
7,0=gV
|
||||
7,2=xd=
|
||||
7,4=gD
|
||||
7,12=gI°
|
||||
|
||||
############
|
||||
@BatteryOLED
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=xBat.Status:
|
||||
0,12=bS
|
||||
1,0=xBatt:
|
||||
1,6=bVV
|
||||
2,0=bCmA (charge)
|
||||
3,0=bDmA (disch.)
|
||||
4,0=xUSB:
|
||||
4,5=bUV
|
||||
5,5=bImA
|
||||
6,0=xTemp:
|
||||
6,5=bT C
|
||||
|
||||
#############
|
||||
@Meteo
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=Is
|
||||
0,9=f
|
||||
1,12=t
|
||||
2,0=xSonde
|
||||
3,0=xData
|
||||
2,10=A
|
||||
4,0=Mt°C
|
||||
4,9=Mh%rH
|
||||
6,0=MphPa
|
||||
6,11=MbV
|
||||
|
||||
#############
|
||||
@GPS-Data
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=xGPS-Data
|
||||
1,0=xLAT :
|
||||
1,6=gA
|
||||
2,0=xLONG:
|
||||
2,6=gO
|
||||
3,0=xALT :
|
||||
3,9=gH
|
||||
4,0=xSonde
|
||||
5,0=xAlt :
|
||||
5,6=a
|
||||
6,0=xDist:
|
||||
6,6=gD
|
||||
|
||||
|
||||
@@ -0,0 +1,276 @@
|
||||
## screens2.txt: TFT display (landscape)
|
||||
# Definition of display content and action behaviour
|
||||
#
|
||||
# Timer: (view timer, rx timer, norx timer)
|
||||
# - value -1: timer is disabled; value>=0: timer fires after (value) seconds
|
||||
# - view timer: time since current view (display mode and sonde) was started
|
||||
# - rx timer: time since when sonde data has been received continuously (trigger immediatly after RX)
|
||||
# - norx timer: time since when no sonde data has been received continuously
|
||||
# (rx and norx timer is started after tuning a new frequency and receiving a signal or not receiving
|
||||
# anything for a 1s period)
|
||||
#
|
||||
# Actions:
|
||||
# - W: activate WiFi scan
|
||||
# - F: activate frequency spectrum display
|
||||
# - 0: activate "Scan:" display (this is basically just display mode 0)
|
||||
# - x: (1..N): activate display mode x [deprecated]
|
||||
# - >: activate next display mode
|
||||
# - D: activate default receiver display (display mode specified in config)
|
||||
# - +: advance to next active sonde from QRG config
|
||||
# - #: no action
|
||||
#
|
||||
# Display content (lower/upper case: small/large font)
|
||||
# line,column=content
|
||||
# for ILI9225 its also possible to indicate
|
||||
# line,column,width=content for text within a box of width 'width'
|
||||
# line,column,-width=content for right-justified text
|
||||
#
|
||||
# XText : Text
|
||||
# F(suffix): frequency (with suffix, e.g., " MHz")
|
||||
# L latitade
|
||||
# O lOngitute
|
||||
# A altitude
|
||||
# Hm(suffix) hor. speed m/s (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Hk(suffix) hor. speed km/h (suffix: e.g. "km/h"; no suffix=>km/h as 16x8 bitmap for SSD1306 display only)
|
||||
# V(suffix) vert. speef (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Ix sonde ID (default/d: dxlaprs; s: short id, n: real serial number)
|
||||
# RS41,RS92: all identical R1234567
|
||||
# DFMx: ID M12345678; short ID and serial 12345678
|
||||
# M10: ID ME95231F0; short ID: M95231F0; serial 9062104592
|
||||
# Q signal quality statistics bar
|
||||
# T type string (RS41/DFM9/DFM6/RS92)
|
||||
# C afC value
|
||||
# N ip address (only tiny font)
|
||||
# S scan list entry info: l/empty: launch site name, #=entry nr, t=total entries, a=active entries, /: #/t
|
||||
# K RS41 kill timer values: Kl launch timer, Kb burst timer, Kc kill countdown
|
||||
# format: K_4: h:mm k_6: h:mm:ss k_s: sssss, nothing shown for other sonde
|
||||
# Mx telemetry value x (t temp p preassure h hyg b batt)
|
||||
# Gx GPS-related data
|
||||
# raw data from GPS: GA, GO, GH, GC: LAtitude, lOngitude, Altutide(Height), Course over ground
|
||||
# relative to sonde: GD, GI, GB: Distance, dIrection (absolute), relative Bearing
|
||||
# G0 GPS circle diagram e.g. 3,5=g0NCS,50,ff0000,000033,5,ffff00,4,ffffff
|
||||
# "N" (what is on top: N=north C=course)
|
||||
# "C" (where does the arrow point to: C=course, S=sonde)
|
||||
# "S" (what is shown by the bullet: C=course, S=sonde)
|
||||
# 50: circle radius, followed by fg and bg color
|
||||
# 5: bullet radius, followed by fg color
|
||||
# 4: arrow width, followed by fg color
|
||||
# R RSSI
|
||||
# B battery(T-Beam 1.0) S=status V=Batt.Volt C=charge current D=discharge current
|
||||
# U=USB volt I=USB current T=IC temp
|
||||
#
|
||||
# fonts=x,y can be used to select font (x=small, y=large) for all items below
|
||||
# for SSD1306, x and y can be used to select one of those fonts:
|
||||
# (y should be a 1x2 font (1,5,6,7), x a small font)
|
||||
# u8x8_font_chroma48medium8_r, // 0 ** default small
|
||||
# u8x8_font_7x14_1x2_f, // 1 ** default large
|
||||
# u8x8_font_amstrad_cpc_extended_f, // 2
|
||||
# u8x8_font_5x7_f, // 3
|
||||
# u8x8_font_5x8_f, // 4
|
||||
# u8x8_font_8x13_1x2_f, // 5
|
||||
# u8x8_font_8x13B_1x2_f, // 6
|
||||
# u8x8_font_7x14B_1x2_f, // 7
|
||||
# u8x8_font_artossans8_r, // 8
|
||||
# u8x8_font_artosserif8_r, // 9
|
||||
# u8x8_font_torussansbold8_r, // 10
|
||||
# u8x8_font_victoriabold8_r, // 11
|
||||
# u8x8_font_victoriamedium8_r, // 12
|
||||
# u8x8_font_pressstart2p_f, // 13
|
||||
# u8x8_font_pcsenior_f, // 14
|
||||
# u8x8_font_pxplusibmcgathin_f, // 15
|
||||
# u8x8_font_pxplusibmcga_f, // 16
|
||||
# u8x8_font_pxplustandynewtv_f, // 17
|
||||
#
|
||||
# for ILI9225, these fonts are available:
|
||||
# Terminal6x8 // 0
|
||||
# Terminal11x16 // 1
|
||||
# Terminal12x16 // 2
|
||||
# FreeMono9pt7b, // 3
|
||||
# FreeMono12pt7b, // 4
|
||||
# FreeSans9pt7b, // 5
|
||||
# FreeSans12pt7b, // 6
|
||||
# Picopixel, // 7
|
||||
#
|
||||
# color=rrggbb,rrggbb can be used to select color (foreground, background)
|
||||
# see https://github.com/Nkawu/TFT_22_ILI9225/wiki#color-reference for example (use without "#"-sign)
|
||||
#
|
||||
# for TFT display, coordinates and width are multiplied by xscale,yscale and later used in pixels
|
||||
# with scale=1,1 you can directly use pixel coordinates. (default: xscale=13,yscale=22 => 8 lines, 16 columns)
|
||||
###########
|
||||
|
||||
############
|
||||
# Scan display for large 2" TFT dispaly
|
||||
@ScannerTFT
|
||||
timer=-1,0,0
|
||||
key1action=D,#,F,W
|
||||
key2action=D,#,#,#
|
||||
timeaction=#,D,+
|
||||
0,0=XScan
|
||||
0,5=S#:
|
||||
0,9=T
|
||||
3,0=F MHz
|
||||
5,0,16=S
|
||||
7,0=bVV
|
||||
7,5=n
|
||||
|
||||
############
|
||||
@Legacy
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
0,0=t
|
||||
0,5=f MHz
|
||||
1,0=is
|
||||
#1,8=c
|
||||
1,8=z
|
||||
2,0=L
|
||||
2,10=a
|
||||
3,10=h
|
||||
4,0=O
|
||||
4,9=v
|
||||
5,9=gC
|
||||
5,13=gB
|
||||
6,0=R
|
||||
6,7=Q
|
||||
7,6=gD
|
||||
7,12=gI°
|
||||
|
||||
############
|
||||
@Field
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
2,0=L
|
||||
4,0=O
|
||||
3,10=h
|
||||
4,9=v
|
||||
0,0=Is
|
||||
6,0=A
|
||||
6,7=Q
|
||||
|
||||
############
|
||||
@Field2
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
2,0=L
|
||||
4,0=O
|
||||
1,12=t
|
||||
0,9=f
|
||||
3,10=h
|
||||
4,9=v
|
||||
0,0=Is
|
||||
6,0=A
|
||||
6,7=Q
|
||||
|
||||
############
|
||||
@GPSDIST
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
0,0=Is
|
||||
0,9=f
|
||||
1,12=t
|
||||
2,0=L
|
||||
4,0=O
|
||||
2,10=a
|
||||
3,10=h
|
||||
4,9=v
|
||||
5,9=gC
|
||||
5,13=gB
|
||||
6,7=Q
|
||||
7,0=gV
|
||||
7,2=xd=
|
||||
7,4=gD
|
||||
7,12=gI°
|
||||
|
||||
### Alternative display layouts based on https://gist.github.com/bazjo
|
||||
# Scan display for large 2" TFT dispaly
|
||||
@BatteryOLED
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=xBat.Status:
|
||||
0,12=bS
|
||||
1,0=xBatt:
|
||||
1,6=bVV
|
||||
2,0=bCmA (charge)
|
||||
3,0=bDmA (disch.)
|
||||
4,0=xUSB:
|
||||
4,5=bUV
|
||||
5,5=bImA
|
||||
6,0=xTemp:
|
||||
6,5=bT C
|
||||
|
||||
############
|
||||
@Meteo
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=Is
|
||||
0,9=f
|
||||
1,12=t
|
||||
2,0=xSonde
|
||||
3,0=xData
|
||||
2,10=A
|
||||
4,0=Mt°C
|
||||
4,9=Mh%rH
|
||||
6,0=MphPa
|
||||
6,11=MbV
|
||||
|
||||
##################
|
||||
@GPS-Data
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=xGPS-Data
|
||||
1,0=xLAT :
|
||||
1,6=gA
|
||||
2,0=xLONG:
|
||||
2,6=gO
|
||||
3,0=xALT :
|
||||
3,9=gH
|
||||
4,0=xSonde
|
||||
5,0=xAlt :
|
||||
5,6=a
|
||||
6,0=xDist:
|
||||
6,6=gD
|
||||
|
||||
#################
|
||||
@TelemetryData
|
||||
scale=22,13
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
fonts=5,6
|
||||
color=FFD700
|
||||
0,0,10.5=Is
|
||||
color=0000FF
|
||||
0,11,-5.5=f
|
||||
1,0,4=t
|
||||
1,10.5,-6=c
|
||||
color=00ff00
|
||||
2,0,7=L
|
||||
3,0,7=O
|
||||
color=FFA500
|
||||
2,9.5,-7=a
|
||||
2.8,9.5,-7=vm/s
|
||||
color=AA5522
|
||||
3.6,9.5,-7=hkkm/h
|
||||
color=FFFFFF
|
||||
4.4,0=xTelemetry Data:
|
||||
5.3,0=Mt C
|
||||
5.3,9=Mh%rH
|
||||
6.5,0=MphPa
|
||||
6.5,11=MbV
|
||||
@@ -0,0 +1,276 @@
|
||||
## screens2.txt: TFT display (landscape)
|
||||
# Definition of display content and action behaviour
|
||||
#
|
||||
# Timer: (view timer, rx timer, norx timer)
|
||||
# - value -1: timer is disabled; value>=0: timer fires after (value) seconds
|
||||
# - view timer: time since current view (display mode and sonde) was started
|
||||
# - rx timer: time since when sonde data has been received continuously (trigger immediatly after RX)
|
||||
# - norx timer: time since when no sonde data has been received continuously
|
||||
# (rx and norx timer is started after tuning a new frequency and receiving a signal or not receiving
|
||||
# anything for a 1s period)
|
||||
#
|
||||
# Actions:
|
||||
# - W: activate WiFi scan
|
||||
# - F: activate frequency spectrum display
|
||||
# - 0: activate "Scan:" display (this is basically just display mode 0)
|
||||
# - x: (1..N): activate display mode x [deprecated]
|
||||
# - >: activate next display mode
|
||||
# - D: activate default receiver display (display mode specified in config)
|
||||
# - +: advance to next active sonde from QRG config
|
||||
# - #: no action
|
||||
#
|
||||
# Display content (lower/upper case: small/large font)
|
||||
# line,column=content
|
||||
# for ILI9225 its also possible to indicate
|
||||
# line,column,width=content for text within a box of width 'width'
|
||||
# line,column,-width=content for right-justified text
|
||||
#
|
||||
# XText : Text
|
||||
# F(suffix): frequency (with suffix, e.g., " MHz")
|
||||
# L latitade
|
||||
# O lOngitute
|
||||
# A altitude
|
||||
# Hm(suffix) hor. speed m/s (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Hk(suffix) hor. speed km/h (suffix: e.g. "km/h"; no suffix=>km/h as 16x8 bitmap for SSD1306 display only)
|
||||
# V(suffix) vert. speef (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Ix sonde ID (default/d: dxlaprs; s: short id, n: real serial number)
|
||||
# RS41,RS92: all identical R1234567
|
||||
# DFMx: ID M12345678; short ID and serial 12345678
|
||||
# M10: ID ME95231F0; short ID: M95231F0; serial 9062104592
|
||||
# Q signal quality statistics bar
|
||||
# T type string (RS41/DFM9/DFM6/RS92)
|
||||
# C afC value
|
||||
# N ip address (only tiny font)
|
||||
# S scan list entry info: l/empty: launch site name, #=entry nr, t=total entries, a=active entries, /: #/t
|
||||
# K RS41 kill timer values: Kl launch timer, Kb burst timer, Kc kill countdown
|
||||
# format: K_4: h:mm k_6: h:mm:ss k_s: sssss, nothing shown for other sonde
|
||||
# Mx telemetry value x (t temp p preassure h hyg b batt)
|
||||
# Gx GPS-related data
|
||||
# raw data from GPS: GA, GO, GH, GC: LAtitude, lOngitude, Altutide(Height), Course over ground
|
||||
# relative to sonde: GD, GI, GB: Distance, dIrection (absolute), relative Bearing
|
||||
# G0 GPS circle diagram e.g. 3,5=g0NCS,50,ff0000,000033,5,ffff00,4,ffffff
|
||||
# "N" (what is on top: N=north C=course)
|
||||
# "C" (where does the arrow point to: C=course, S=sonde)
|
||||
# "S" (what is shown by the bullet: C=course, S=sonde)
|
||||
# 50: circle radius, followed by fg and bg color
|
||||
# 5: bullet radius, followed by fg color
|
||||
# 4: arrow width, followed by fg color
|
||||
# R RSSI
|
||||
# B battery(T-Beam 1.0) S=status V=Batt.Volt C=charge current D=discharge current
|
||||
# U=USB volt I=USB current T=IC temp
|
||||
#
|
||||
# fonts=x,y can be used to select font (x=small, y=large) for all items below
|
||||
# for SSD1306, x and y can be used to select one of those fonts:
|
||||
# (y should be a 1x2 font (1,5,6,7), x a small font)
|
||||
# u8x8_font_chroma48medium8_r, // 0 ** default small
|
||||
# u8x8_font_7x14_1x2_f, // 1 ** default large
|
||||
# u8x8_font_amstrad_cpc_extended_f, // 2
|
||||
# u8x8_font_5x7_f, // 3
|
||||
# u8x8_font_5x8_f, // 4
|
||||
# u8x8_font_8x13_1x2_f, // 5
|
||||
# u8x8_font_8x13B_1x2_f, // 6
|
||||
# u8x8_font_7x14B_1x2_f, // 7
|
||||
# u8x8_font_artossans8_r, // 8
|
||||
# u8x8_font_artosserif8_r, // 9
|
||||
# u8x8_font_torussansbold8_r, // 10
|
||||
# u8x8_font_victoriabold8_r, // 11
|
||||
# u8x8_font_victoriamedium8_r, // 12
|
||||
# u8x8_font_pressstart2p_f, // 13
|
||||
# u8x8_font_pcsenior_f, // 14
|
||||
# u8x8_font_pxplusibmcgathin_f, // 15
|
||||
# u8x8_font_pxplusibmcga_f, // 16
|
||||
# u8x8_font_pxplustandynewtv_f, // 17
|
||||
#
|
||||
# for ILI9225, these fonts are available:
|
||||
# Terminal6x8 // 0
|
||||
# Terminal11x16 // 1
|
||||
# Terminal12x16 // 2
|
||||
# FreeMono9pt7b, // 3
|
||||
# FreeMono12pt7b, // 4
|
||||
# FreeSans9pt7b, // 5
|
||||
# FreeSans12pt7b, // 6
|
||||
# Picopixel, // 7
|
||||
#
|
||||
# color=rrggbb,rrggbb can be used to select color (foreground, background)
|
||||
# see https://github.com/Nkawu/TFT_22_ILI9225/wiki#color-reference for example (use without "#"-sign)
|
||||
#
|
||||
# for TFT display, coordinates and width are multiplied by xscale,yscale and later used in pixels
|
||||
# with scale=1,1 you can directly use pixel coordinates. (default: xscale=13,yscale=22 => 8 lines, 16 columns)
|
||||
###########
|
||||
|
||||
############
|
||||
# Scan display for large 2" TFT dispaly
|
||||
@ScannerTFT
|
||||
timer=-1,0,0
|
||||
key1action=D,#,F,W
|
||||
key2action=D,#,#,#
|
||||
timeaction=#,D,+
|
||||
0,0=XScan
|
||||
0,5=S#:
|
||||
0,9=T
|
||||
3,0=F MHz
|
||||
5,0,16=S
|
||||
7,0=bVV
|
||||
7,5=n
|
||||
|
||||
############
|
||||
@Legacy
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
0,0=t
|
||||
0,5=f MHz
|
||||
1,0=is
|
||||
#1,8=c
|
||||
1,8=z
|
||||
2,0=L
|
||||
2,10=a
|
||||
3,10=h
|
||||
4,0=O
|
||||
4,9=v
|
||||
5,9=gC
|
||||
5,13=gB
|
||||
6,0=R
|
||||
6,7=Q
|
||||
7,6=gD
|
||||
7,12=gI°
|
||||
|
||||
############
|
||||
@Field
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
2,0=L
|
||||
4,0=O
|
||||
3,10=h
|
||||
4,9=v
|
||||
0,0=Is
|
||||
6,0=A
|
||||
6,7=Q
|
||||
|
||||
############
|
||||
@Field2
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
2,0=L
|
||||
4,0=O
|
||||
1,12=t
|
||||
0,9=f
|
||||
3,10=h
|
||||
4,9=v
|
||||
0,0=Is
|
||||
6,0=A
|
||||
6,7=Q
|
||||
|
||||
############
|
||||
@GPSDIST
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
0,0=Is
|
||||
0,9=f
|
||||
1,12=t
|
||||
2,0=L
|
||||
4,0=O
|
||||
2,10=a
|
||||
3,10=h
|
||||
4,9=v
|
||||
5,9=gC
|
||||
5,13=gB
|
||||
6,7=Q
|
||||
7,0=gV
|
||||
7,2=xd=
|
||||
7,4=gD
|
||||
7,12=gI°
|
||||
|
||||
### Alternative display layouts based on https://gist.github.com/bazjo
|
||||
# Scan display for large 2" TFT dispaly
|
||||
@BatteryOLED
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=xBat.Status:
|
||||
0,12=bS
|
||||
1,0=xBatt:
|
||||
1,6=bVV
|
||||
2,0=bCmA (charge)
|
||||
3,0=bDmA (disch.)
|
||||
4,0=xUSB:
|
||||
4,5=bUV
|
||||
5,5=bImA
|
||||
6,0=xTemp:
|
||||
6,5=bT C
|
||||
|
||||
############
|
||||
@Meteo
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=Is
|
||||
0,9=f
|
||||
1,12=t
|
||||
2,0=xSonde
|
||||
3,0=xData
|
||||
2,10=A
|
||||
4,0=Mt°C
|
||||
4,9=Mh%rH
|
||||
6,0=MphPa
|
||||
6,11=MbV
|
||||
|
||||
##################
|
||||
@GPS-Data
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=xGPS-Data
|
||||
1,0=xLAT :
|
||||
1,6=gA
|
||||
2,0=xLONG:
|
||||
2,6=gO
|
||||
3,0=xALT :
|
||||
3,9=gH
|
||||
4,0=xSonde
|
||||
5,0=xAlt :
|
||||
5,6=a
|
||||
6,0=xDist:
|
||||
6,6=gD
|
||||
|
||||
#################
|
||||
@TelemetryData
|
||||
scale=22,13
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
fonts=5,6
|
||||
color=FFD700
|
||||
0,0,10.5=Is
|
||||
color=0000FF
|
||||
0,11,-5.5=f
|
||||
1,0,4=t
|
||||
1,10.5,-6=c
|
||||
color=00ff00
|
||||
2,0,7=L
|
||||
3,0,7=O
|
||||
color=FFA500
|
||||
2,9.5,-7=a
|
||||
2.8,9.5,-7=vm/s
|
||||
color=AA5522
|
||||
3.6,9.5,-7=hkkm/h
|
||||
color=FFFFFF
|
||||
4.4,0=xTelemetry Data:
|
||||
5.3,0=Mt C
|
||||
5.3,9=Mh%rH
|
||||
6.5,0=MphPa
|
||||
6.5,11=MbV
|
||||
@@ -0,0 +1,276 @@
|
||||
## screens2.txt: TFT display (landscape)
|
||||
# Definition of display content and action behaviour
|
||||
#
|
||||
# Timer: (view timer, rx timer, norx timer)
|
||||
# - value -1: timer is disabled; value>=0: timer fires after (value) seconds
|
||||
# - view timer: time since current view (display mode and sonde) was started
|
||||
# - rx timer: time since when sonde data has been received continuously (trigger immediatly after RX)
|
||||
# - norx timer: time since when no sonde data has been received continuously
|
||||
# (rx and norx timer is started after tuning a new frequency and receiving a signal or not receiving
|
||||
# anything for a 1s period)
|
||||
#
|
||||
# Actions:
|
||||
# - W: activate WiFi scan
|
||||
# - F: activate frequency spectrum display
|
||||
# - 0: activate "Scan:" display (this is basically just display mode 0)
|
||||
# - x: (1..N): activate display mode x [deprecated]
|
||||
# - >: activate next display mode
|
||||
# - D: activate default receiver display (display mode specified in config)
|
||||
# - +: advance to next active sonde from QRG config
|
||||
# - #: no action
|
||||
#
|
||||
# Display content (lower/upper case: small/large font)
|
||||
# line,column=content
|
||||
# for ILI9225 its also possible to indicate
|
||||
# line,column,width=content for text within a box of width 'width'
|
||||
# line,column,-width=content for right-justified text
|
||||
#
|
||||
# XText : Text
|
||||
# F(suffix): frequency (with suffix, e.g., " MHz")
|
||||
# L latitade
|
||||
# O lOngitute
|
||||
# A altitude
|
||||
# Hm(suffix) hor. speed m/s (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Hk(suffix) hor. speed km/h (suffix: e.g. "km/h"; no suffix=>km/h as 16x8 bitmap for SSD1306 display only)
|
||||
# V(suffix) vert. speef (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Ix sonde ID (default/d: dxlaprs; s: short id, n: real serial number)
|
||||
# RS41,RS92: all identical R1234567
|
||||
# DFMx: ID M12345678; short ID and serial 12345678
|
||||
# M10: ID ME95231F0; short ID: M95231F0; serial 9062104592
|
||||
# Q signal quality statistics bar
|
||||
# T type string (RS41/DFM9/DFM6/RS92)
|
||||
# C afC value
|
||||
# N ip address (only tiny font)
|
||||
# S scan list entry info: l/empty: launch site name, #=entry nr, t=total entries, a=active entries, /: #/t
|
||||
# K RS41 kill timer values: Kl launch timer, Kb burst timer, Kc kill countdown
|
||||
# format: K_4: h:mm k_6: h:mm:ss k_s: sssss, nothing shown for other sonde
|
||||
# Mx telemetry value x (t temp p preassure h hyg b batt)
|
||||
# Gx GPS-related data
|
||||
# raw data from GPS: GA, GO, GH, GC: LAtitude, lOngitude, Altutide(Height), Course over ground
|
||||
# relative to sonde: GD, GI, GB: Distance, dIrection (absolute), relative Bearing
|
||||
# G0 GPS circle diagram e.g. 3,5=g0NCS,50,ff0000,000033,5,ffff00,4,ffffff
|
||||
# "N" (what is on top: N=north C=course)
|
||||
# "C" (where does the arrow point to: C=course, S=sonde)
|
||||
# "S" (what is shown by the bullet: C=course, S=sonde)
|
||||
# 50: circle radius, followed by fg and bg color
|
||||
# 5: bullet radius, followed by fg color
|
||||
# 4: arrow width, followed by fg color
|
||||
# R RSSI
|
||||
# B battery(T-Beam 1.0) S=status V=Batt.Volt C=charge current D=discharge current
|
||||
# U=USB volt I=USB current T=IC temp
|
||||
#
|
||||
# fonts=x,y can be used to select font (x=small, y=large) for all items below
|
||||
# for SSD1306, x and y can be used to select one of those fonts:
|
||||
# (y should be a 1x2 font (1,5,6,7), x a small font)
|
||||
# u8x8_font_chroma48medium8_r, // 0 ** default small
|
||||
# u8x8_font_7x14_1x2_f, // 1 ** default large
|
||||
# u8x8_font_amstrad_cpc_extended_f, // 2
|
||||
# u8x8_font_5x7_f, // 3
|
||||
# u8x8_font_5x8_f, // 4
|
||||
# u8x8_font_8x13_1x2_f, // 5
|
||||
# u8x8_font_8x13B_1x2_f, // 6
|
||||
# u8x8_font_7x14B_1x2_f, // 7
|
||||
# u8x8_font_artossans8_r, // 8
|
||||
# u8x8_font_artosserif8_r, // 9
|
||||
# u8x8_font_torussansbold8_r, // 10
|
||||
# u8x8_font_victoriabold8_r, // 11
|
||||
# u8x8_font_victoriamedium8_r, // 12
|
||||
# u8x8_font_pressstart2p_f, // 13
|
||||
# u8x8_font_pcsenior_f, // 14
|
||||
# u8x8_font_pxplusibmcgathin_f, // 15
|
||||
# u8x8_font_pxplusibmcga_f, // 16
|
||||
# u8x8_font_pxplustandynewtv_f, // 17
|
||||
#
|
||||
# for ILI9225, these fonts are available:
|
||||
# Terminal6x8 // 0
|
||||
# Terminal11x16 // 1
|
||||
# Terminal12x16 // 2
|
||||
# FreeMono9pt7b, // 3
|
||||
# FreeMono12pt7b, // 4
|
||||
# FreeSans9pt7b, // 5
|
||||
# FreeSans12pt7b, // 6
|
||||
# Picopixel, // 7
|
||||
#
|
||||
# color=rrggbb,rrggbb can be used to select color (foreground, background)
|
||||
# see https://github.com/Nkawu/TFT_22_ILI9225/wiki#color-reference for example (use without "#"-sign)
|
||||
#
|
||||
# for TFT display, coordinates and width are multiplied by xscale,yscale and later used in pixels
|
||||
# with scale=1,1 you can directly use pixel coordinates. (default: xscale=13,yscale=22 => 8 lines, 16 columns)
|
||||
###########
|
||||
|
||||
############
|
||||
# Scan display for large 2" TFT dispaly
|
||||
@ScannerTFT
|
||||
timer=-1,0,0
|
||||
key1action=D,#,F,W
|
||||
key2action=D,#,#,#
|
||||
timeaction=#,D,+
|
||||
0,0=XScan
|
||||
0,5=S#:
|
||||
0,9=T
|
||||
3,0=F MHz
|
||||
5,0,16=S
|
||||
7,0=bVV
|
||||
7,5=n
|
||||
|
||||
############
|
||||
@Legacy
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
0,0=t
|
||||
0,5=f MHz
|
||||
1,0=is
|
||||
#1,8=c
|
||||
1,8=z
|
||||
2,0=L
|
||||
2,10=a
|
||||
3,10=h
|
||||
4,0=O
|
||||
4,9=v
|
||||
5,9=gC
|
||||
5,13=gB
|
||||
6,0=R
|
||||
6,7=Q
|
||||
7,6=gD
|
||||
7,12=gI°
|
||||
|
||||
############
|
||||
@Field
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
2,0=L
|
||||
4,0=O
|
||||
3,10=h
|
||||
4,9=v
|
||||
0,0=Is
|
||||
6,0=A
|
||||
6,7=Q
|
||||
|
||||
############
|
||||
@Field2
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
2,0=L
|
||||
4,0=O
|
||||
1,12=t
|
||||
0,9=f
|
||||
3,10=h
|
||||
4,9=v
|
||||
0,0=Is
|
||||
6,0=A
|
||||
6,7=Q
|
||||
|
||||
############
|
||||
@GPSDIST
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
0,0=Is
|
||||
0,9=f
|
||||
1,12=t
|
||||
2,0=L
|
||||
4,0=O
|
||||
2,10=a
|
||||
3,10=h
|
||||
4,9=v
|
||||
5,9=gC
|
||||
5,13=gB
|
||||
6,7=Q
|
||||
7,0=gV
|
||||
7,2=xd=
|
||||
7,4=gD
|
||||
7,12=gI°
|
||||
|
||||
### Alternative display layouts based on https://gist.github.com/bazjo
|
||||
# Scan display for large 2" TFT dispaly
|
||||
@BatteryOLED
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=xBat.Status:
|
||||
0,12=bS
|
||||
1,0=xBatt:
|
||||
1,6=bVV
|
||||
2,0=bCmA (charge)
|
||||
3,0=bDmA (disch.)
|
||||
4,0=xUSB:
|
||||
4,5=bUV
|
||||
5,5=bImA
|
||||
6,0=xTemp:
|
||||
6,5=bT C
|
||||
|
||||
############
|
||||
@Meteo
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=Is
|
||||
0,9=f
|
||||
1,12=t
|
||||
2,0=xSonde
|
||||
3,0=xData
|
||||
2,10=A
|
||||
4,0=Mt°C
|
||||
4,9=Mh%rH
|
||||
6,0=MphPa
|
||||
6,11=MbV
|
||||
|
||||
##################
|
||||
@GPS-Data
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=xGPS-Data
|
||||
1,0=xLAT :
|
||||
1,6=gA
|
||||
2,0=xLONG:
|
||||
2,6=gO
|
||||
3,0=xALT :
|
||||
3,9=gH
|
||||
4,0=xSonde
|
||||
5,0=xAlt :
|
||||
5,6=a
|
||||
6,0=xDist:
|
||||
6,6=gD
|
||||
|
||||
#################
|
||||
@TelemetryData
|
||||
scale=22,13
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
fonts=5,6
|
||||
color=FFD700
|
||||
0,0,10.5=Is
|
||||
color=0000FF
|
||||
0,11,-5.5=f
|
||||
1,0,4=t
|
||||
1,10.5,-6=c
|
||||
color=00ff00
|
||||
2,0,7=L
|
||||
3,0,7=O
|
||||
color=FFA500
|
||||
2,9.5,-7=a
|
||||
2.8,9.5,-7=vm/s
|
||||
color=AA5522
|
||||
3.6,9.5,-7=hkkm/h
|
||||
color=FFFFFF
|
||||
4.4,0=xTelemetry Data:
|
||||
5.3,0=Mt C
|
||||
5.3,9=Mh%rH
|
||||
6.5,0=MphPa
|
||||
6.5,11=MbV
|
||||
@@ -0,0 +1,276 @@
|
||||
## screens2.txt: TFT display (landscape)
|
||||
# Definition of display content and action behaviour
|
||||
#
|
||||
# Timer: (view timer, rx timer, norx timer)
|
||||
# - value -1: timer is disabled; value>=0: timer fires after (value) seconds
|
||||
# - view timer: time since current view (display mode and sonde) was started
|
||||
# - rx timer: time since when sonde data has been received continuously (trigger immediatly after RX)
|
||||
# - norx timer: time since when no sonde data has been received continuously
|
||||
# (rx and norx timer is started after tuning a new frequency and receiving a signal or not receiving
|
||||
# anything for a 1s period)
|
||||
#
|
||||
# Actions:
|
||||
# - W: activate WiFi scan
|
||||
# - F: activate frequency spectrum display
|
||||
# - 0: activate "Scan:" display (this is basically just display mode 0)
|
||||
# - x: (1..N): activate display mode x [deprecated]
|
||||
# - >: activate next display mode
|
||||
# - D: activate default receiver display (display mode specified in config)
|
||||
# - +: advance to next active sonde from QRG config
|
||||
# - #: no action
|
||||
#
|
||||
# Display content (lower/upper case: small/large font)
|
||||
# line,column=content
|
||||
# for ILI9225 its also possible to indicate
|
||||
# line,column,width=content for text within a box of width 'width'
|
||||
# line,column,-width=content for right-justified text
|
||||
#
|
||||
# XText : Text
|
||||
# F(suffix): frequency (with suffix, e.g., " MHz")
|
||||
# L latitade
|
||||
# O lOngitute
|
||||
# A altitude
|
||||
# Hm(suffix) hor. speed m/s (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Hk(suffix) hor. speed km/h (suffix: e.g. "km/h"; no suffix=>km/h as 16x8 bitmap for SSD1306 display only)
|
||||
# V(suffix) vert. speef (suffix: e.g. "m/s"; no suffix=>m/s as 16x8 bitmap for SSD1306 display only)
|
||||
# Ix sonde ID (default/d: dxlaprs; s: short id, n: real serial number)
|
||||
# RS41,RS92: all identical R1234567
|
||||
# DFMx: ID M12345678; short ID and serial 12345678
|
||||
# M10: ID ME95231F0; short ID: M95231F0; serial 9062104592
|
||||
# Q signal quality statistics bar
|
||||
# T type string (RS41/DFM9/DFM6/RS92)
|
||||
# C afC value
|
||||
# N ip address (only tiny font)
|
||||
# S scan list entry info: l/empty: launch site name, #=entry nr, t=total entries, a=active entries, /: #/t
|
||||
# K RS41 kill timer values: Kl launch timer, Kb burst timer, Kc kill countdown
|
||||
# format: K_4: h:mm k_6: h:mm:ss k_s: sssss, nothing shown for other sonde
|
||||
# Mx telemetry value x (t temp p preassure h hyg b batt)
|
||||
# Gx GPS-related data
|
||||
# raw data from GPS: GA, GO, GH, GC: LAtitude, lOngitude, Altutide(Height), Course over ground
|
||||
# relative to sonde: GD, GI, GB: Distance, dIrection (absolute), relative Bearing
|
||||
# G0 GPS circle diagram e.g. 3,5=g0NCS,50,ff0000,000033,5,ffff00,4,ffffff
|
||||
# "N" (what is on top: N=north C=course)
|
||||
# "C" (where does the arrow point to: C=course, S=sonde)
|
||||
# "S" (what is shown by the bullet: C=course, S=sonde)
|
||||
# 50: circle radius, followed by fg and bg color
|
||||
# 5: bullet radius, followed by fg color
|
||||
# 4: arrow width, followed by fg color
|
||||
# R RSSI
|
||||
# B battery(T-Beam 1.0) S=status V=Batt.Volt C=charge current D=discharge current
|
||||
# U=USB volt I=USB current T=IC temp
|
||||
#
|
||||
# fonts=x,y can be used to select font (x=small, y=large) for all items below
|
||||
# for SSD1306, x and y can be used to select one of those fonts:
|
||||
# (y should be a 1x2 font (1,5,6,7), x a small font)
|
||||
# u8x8_font_chroma48medium8_r, // 0 ** default small
|
||||
# u8x8_font_7x14_1x2_f, // 1 ** default large
|
||||
# u8x8_font_amstrad_cpc_extended_f, // 2
|
||||
# u8x8_font_5x7_f, // 3
|
||||
# u8x8_font_5x8_f, // 4
|
||||
# u8x8_font_8x13_1x2_f, // 5
|
||||
# u8x8_font_8x13B_1x2_f, // 6
|
||||
# u8x8_font_7x14B_1x2_f, // 7
|
||||
# u8x8_font_artossans8_r, // 8
|
||||
# u8x8_font_artosserif8_r, // 9
|
||||
# u8x8_font_torussansbold8_r, // 10
|
||||
# u8x8_font_victoriabold8_r, // 11
|
||||
# u8x8_font_victoriamedium8_r, // 12
|
||||
# u8x8_font_pressstart2p_f, // 13
|
||||
# u8x8_font_pcsenior_f, // 14
|
||||
# u8x8_font_pxplusibmcgathin_f, // 15
|
||||
# u8x8_font_pxplusibmcga_f, // 16
|
||||
# u8x8_font_pxplustandynewtv_f, // 17
|
||||
#
|
||||
# for ILI9225, these fonts are available:
|
||||
# Terminal6x8 // 0
|
||||
# Terminal11x16 // 1
|
||||
# Terminal12x16 // 2
|
||||
# FreeMono9pt7b, // 3
|
||||
# FreeMono12pt7b, // 4
|
||||
# FreeSans9pt7b, // 5
|
||||
# FreeSans12pt7b, // 6
|
||||
# Picopixel, // 7
|
||||
#
|
||||
# color=rrggbb,rrggbb can be used to select color (foreground, background)
|
||||
# see https://github.com/Nkawu/TFT_22_ILI9225/wiki#color-reference for example (use without "#"-sign)
|
||||
#
|
||||
# for TFT display, coordinates and width are multiplied by xscale,yscale and later used in pixels
|
||||
# with scale=1,1 you can directly use pixel coordinates. (default: xscale=13,yscale=22 => 8 lines, 16 columns)
|
||||
###########
|
||||
|
||||
############
|
||||
# Scan display for large 2" TFT dispaly
|
||||
@ScannerTFT
|
||||
timer=-1,0,0
|
||||
key1action=D,#,F,W
|
||||
key2action=D,#,#,#
|
||||
timeaction=#,D,+
|
||||
0,0=XScan
|
||||
0,5=S#:
|
||||
0,9=T
|
||||
3,0=F MHz
|
||||
5,0,16=S
|
||||
7,0=bVV
|
||||
7,5=n
|
||||
|
||||
############
|
||||
@Legacy
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
0,0=t
|
||||
0,5=f MHz
|
||||
1,0=is
|
||||
#1,8=c
|
||||
1,8=z
|
||||
2,0=L
|
||||
2,10=a
|
||||
3,10=h
|
||||
4,0=O
|
||||
4,9=v
|
||||
5,9=gC
|
||||
5,13=gB
|
||||
6,0=R
|
||||
6,7=Q
|
||||
7,6=gD
|
||||
7,12=gI°
|
||||
|
||||
############
|
||||
@Field
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
2,0=L
|
||||
4,0=O
|
||||
3,10=h
|
||||
4,9=v
|
||||
0,0=Is
|
||||
6,0=A
|
||||
6,7=Q
|
||||
|
||||
############
|
||||
@Field2
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
2,0=L
|
||||
4,0=O
|
||||
1,12=t
|
||||
0,9=f
|
||||
3,10=h
|
||||
4,9=v
|
||||
0,0=Is
|
||||
6,0=A
|
||||
6,7=Q
|
||||
|
||||
############
|
||||
@GPSDIST
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
0,0=Is
|
||||
0,9=f
|
||||
1,12=t
|
||||
2,0=L
|
||||
4,0=O
|
||||
2,10=a
|
||||
3,10=h
|
||||
4,9=v
|
||||
5,9=gC
|
||||
5,13=gB
|
||||
6,7=Q
|
||||
7,0=gV
|
||||
7,2=xd=
|
||||
7,4=gD
|
||||
7,12=gI°
|
||||
|
||||
### Alternative display layouts based on https://gist.github.com/bazjo
|
||||
# Scan display for large 2" TFT dispaly
|
||||
@BatteryOLED
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=xBat.Status:
|
||||
0,12=bS
|
||||
1,0=xBatt:
|
||||
1,6=bVV
|
||||
2,0=bCmA (charge)
|
||||
3,0=bDmA (disch.)
|
||||
4,0=xUSB:
|
||||
4,5=bUV
|
||||
5,5=bImA
|
||||
6,0=xTemp:
|
||||
6,5=bT C
|
||||
|
||||
############
|
||||
@Meteo
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=Is
|
||||
0,9=f
|
||||
1,12=t
|
||||
2,0=xSonde
|
||||
3,0=xData
|
||||
2,10=A
|
||||
4,0=Mt°C
|
||||
4,9=Mh%rH
|
||||
6,0=MphPa
|
||||
6,11=MbV
|
||||
|
||||
##################
|
||||
@GPS-Data
|
||||
timer=-1,-1,-1
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,#
|
||||
fonts=0,1
|
||||
0,0=xGPS-Data
|
||||
1,0=xLAT :
|
||||
1,6=gA
|
||||
2,0=xLONG:
|
||||
2,6=gO
|
||||
3,0=xALT :
|
||||
3,9=gH
|
||||
4,0=xSonde
|
||||
5,0=xAlt :
|
||||
5,6=a
|
||||
6,0=xDist:
|
||||
6,6=gD
|
||||
|
||||
#################
|
||||
@TelemetryData
|
||||
scale=22,13
|
||||
timer=-1,-1,N
|
||||
key1action=+,0,F,W
|
||||
key2action=>,#,#,#
|
||||
timeaction=#,#,0
|
||||
fonts=5,6
|
||||
color=FFD700
|
||||
0,0,10.5=Is
|
||||
color=0000FF
|
||||
0,11,-5.5=f
|
||||
1,0,4=t
|
||||
1,10.5,-6=c
|
||||
color=00ff00
|
||||
2,0,7=L
|
||||
3,0,7=O
|
||||
color=FFA500
|
||||
2,9.5,-7=a
|
||||
2.8,9.5,-7=vm/s
|
||||
color=AA5522
|
||||
3.6,9.5,-7=hkkm/h
|
||||
color=FFFFFF
|
||||
4.4,0=xTelemetry Data:
|
||||
5.3,0=Mt C
|
||||
5.3,9=Mh%rH
|
||||
6.5,0=MphPa
|
||||
6.5,11=MbV
|
||||
Executable
+659
@@ -0,0 +1,659 @@
|
||||
body, html {
|
||||
height: 100%;
|
||||
margin: 0;
|
||||
font-family: Arial;
|
||||
}
|
||||
|
||||
table, th, td {
|
||||
border: 1px solid black;
|
||||
border-collapse: collapse;
|
||||
background-color: #ddd
|
||||
}
|
||||
|
||||
td#caption {
|
||||
text-align: center;
|
||||
background-color: #aaa;
|
||||
font-weight: bold;
|
||||
}
|
||||
|
||||
td#sfreq {
|
||||
background-color: #ccc;
|
||||
}
|
||||
|
||||
.tab {
|
||||
overflow: hidden;
|
||||
border: 1px solid #ccc;
|
||||
}
|
||||
|
||||
.tab button {
|
||||
background-color: inherit;
|
||||
float: left;
|
||||
border: none;
|
||||
outline: none;
|
||||
cursor: pointer;
|
||||
padding: 14px 16px;
|
||||
transition: 0.3s;
|
||||
}
|
||||
|
||||
.tab button:hover {
|
||||
background-color: #ddd;
|
||||
}
|
||||
|
||||
.tab button.active {
|
||||
background-color: #ccc;
|
||||
}
|
||||
|
||||
.tabcontent {
|
||||
display: none;
|
||||
padding: 6px 12px;
|
||||
border: 1px solid #ccc;
|
||||
border-top: none;
|
||||
height: 100%;
|
||||
background-color: #FFFFFF;
|
||||
}
|
||||
|
||||
html {
|
||||
font-family: Helvetica;
|
||||
display: inline-block;
|
||||
margin: 0px auto;
|
||||
text-align: center;
|
||||
}
|
||||
h1{
|
||||
color: #0F3376;
|
||||
padding: 2vh;
|
||||
}
|
||||
p{
|
||||
font-size: 1.5rem;
|
||||
}
|
||||
.button {
|
||||
display: inline-block;
|
||||
background-color: #008CBA;
|
||||
border: none;
|
||||
border-radius: 4px;
|
||||
color: white;
|
||||
padding: 16px 40px;
|
||||
text-decoration: none;
|
||||
font-size: 30px;
|
||||
margin: 2px;
|
||||
cursor: pointer;
|
||||
}
|
||||
.button2 {
|
||||
background-color: #f44336;
|
||||
}
|
||||
|
||||
/*!
|
||||
* Font Awesome 4.3.0 by @davegandy - http://fontawesome.io - @fontawesome
|
||||
* License - http://fontawesome.io/license (Font: SIL OFL 1.1, CSS: MIT License)
|
||||
*/@font-face{font-family:'FontAwesome';
|
||||
src:url('fontawesome-webfont.eot?v=4.3.0');
|
||||
src:url('fontawesome-webfont.eot?#iefix&v=4.3.0') format('embedded-opentype'),url('fontawesome-webfont.woff2?v=4.3.0') format('woff2'),url('fontawesome-webfont.woff?v=4.3.0') format('woff'),url('fontawesome-webfont.ttf?v=4.3.0') format('truetype'),url('fontawesome-webfont.svg?v=4.3.0#fontawesomeregular') format('svg');
|
||||
font-weight:normal;
|
||||
font-style:normal}.fa{display:inline-block;
|
||||
font:normal normal normal 14px/1 FontAwesome;
|
||||
font-size:inherit;
|
||||
text-rendering:auto;
|
||||
-webkit-font-smoothing:antialiased;
|
||||
-moz-osx-font-smoothing:grayscale;
|
||||
transform:translate(0, 0)}.fa-lg{font-size:1.33333333em;
|
||||
line-height:.75em;
|
||||
vertical-align:-15%}.fa-2x{font-size:2em}.fa-3x{font-size:3em}.fa-4x{font-size:4em}.fa-5x{font-size:5em}.fa-fw{width:1.28571429em;
|
||||
text-align:center}.fa-ul{padding-left:0;
|
||||
margin-left:2.14285714em;
|
||||
list-style-type:none}.fa-ul>li{position:relative}.fa-li{position:absolute;
|
||||
left:-2.14285714em;
|
||||
width:2.14285714em;
|
||||
top:.14285714em;
|
||||
text-align:center}.fa-li.fa-lg{left:-1.85714286em}.fa-border{padding:.2em .25em .15em;
|
||||
border:solid .08em #eee;
|
||||
border-radius:.1em}.pull-right{float:right}.pull-left{float:left}.fa.pull-left{margin-right:.3em}.fa.pull-right{margin-left:.3em}.fa-spin{-webkit-animation:fa-spin 2s infinite linear;
|
||||
animation:fa-spin 2s infinite linear}.fa-pulse{-webkit-animation:fa-spin 1s infinite steps(8);
|
||||
animation:fa-spin 1s infinite steps(8)}@-webkit-keyframes fa-spin{0%{-webkit-transform:rotate(0deg);
|
||||
transform:rotate(0deg)}100%{-webkit-transform:rotate(359deg);
|
||||
transform:rotate(359deg)}}@keyframes fa-spin{0%{-webkit-transform:rotate(0deg);
|
||||
transform:rotate(0deg)}100%{-webkit-transform:rotate(359deg);
|
||||
transform:rotate(359deg)}}.fa-rotate-90{filter:progid:DXImageTransform.Microsoft.BasicImage(rotation=1);
|
||||
-webkit-transform:rotate(90deg);
|
||||
-ms-transform:rotate(90deg);
|
||||
transform:rotate(90deg)}.fa-rotate-180{filter:progid:DXImageTransform.Microsoft.BasicImage(rotation=2);
|
||||
-webkit-transform:rotate(180deg);
|
||||
-ms-transform:rotate(180deg);
|
||||
transform:rotate(180deg)}.fa-rotate-270{filter:progid:DXImageTransform.Microsoft.BasicImage(rotation=3);
|
||||
-webkit-transform:rotate(270deg);
|
||||
-ms-transform:rotate(270deg);
|
||||
transform:rotate(270deg)}.fa-flip-horizontal{filter:progid:DXImageTransform.Microsoft.BasicImage(rotation=0, mirror=1);
|
||||
-webkit-transform:scale(-1, 1);
|
||||
-ms-transform:scale(-1, 1);
|
||||
transform:scale(-1, 1)}.fa-flip-vertical{filter:progid:DXImageTransform.Microsoft.BasicImage(rotation=2, mirror=1);
|
||||
-webkit-transform:scale(1, -1);
|
||||
-ms-transform:scale(1, -1);
|
||||
transform:scale(1, -1)}:root .fa-rotate-90,:root .fa-rotate-180,:root .fa-rotate-270,:root .fa-flip-horizontal,:root .fa-flip-vertical{filter:none}.fa-stack{position:relative;
|
||||
display:inline-block;
|
||||
width:2em;
|
||||
height:2em;
|
||||
line-height:2em;
|
||||
vertical-align:middle}.fa-stack-1x,.fa-stack-2x{position:absolute;
|
||||
left:0;
|
||||
width:100%;
|
||||
text-align:center}
|
||||
.fa-stack-1x{line-height:inherit}
|
||||
.fa-stack-2x{font-size:2em}
|
||||
.fa-inverse{color:#fff}
|
||||
.fa-glass:before{content:"\f000"}
|
||||
.fa-music:before{content:"\f001"}
|
||||
.fa-search:before{content:"\f002"}
|
||||
.fa-envelope-o:before{content:"\f003"}
|
||||
.fa-heart:before{content:"\f004"}
|
||||
.fa-star:before{content:"\f005"}
|
||||
.fa-star-o:before{content:"\f006"}
|
||||
.fa-user:before{content:"\f007"}
|
||||
.fa-film:before{content:"\f008"}
|
||||
.fa-th-large:before{content:"\f009"}
|
||||
.fa-th:before{content:"\f00a"}
|
||||
.fa-th-list:before{content:"\f00b"}
|
||||
.fa-check:before{content:"\f00c"}
|
||||
.fa-remove:before,.fa-close:before,.fa-times:before{content:"\f00d"}
|
||||
.fa-search-plus:before{content:"\f00e"}
|
||||
.fa-search-minus:before{content:"\f010"}
|
||||
.fa-power-off:before{content:"\f011"}
|
||||
.fa-signal:before{content:"\f012"}
|
||||
.fa-gear:before,.fa-cog:before{content:"\f013"}
|
||||
.fa-trash-o:before{content:"\f014"}
|
||||
.fa-home:before{content:"\f015"}
|
||||
.fa-file-o:before{content:"\f016"}
|
||||
.fa-clock-o:before{content:"\f017"}
|
||||
.fa-road:before{content:"\f018"}
|
||||
.fa-download:before{content:"\f019"}
|
||||
.fa-arrow-circle-o-down:before{content:"\f01a"}
|
||||
.fa-arrow-circle-o-up:before{content:"\f01b"}
|
||||
.fa-inbox:before{content:"\f01c"}
|
||||
.fa-play-circle-o:before{content:"\f01d"}
|
||||
.fa-rotate-right:before,.fa-repeat:before{content:"\f01e"}
|
||||
.fa-refresh:before{content:"\f021"}
|
||||
.fa-list-alt:before{content:"\f022"}
|
||||
.fa-lock:before{content:"\f023"}
|
||||
.fa-flag:before{content:"\f024"}
|
||||
.fa-headphones:before{content:"\f025"}
|
||||
.fa-volume-off:before{content:"\f026"}
|
||||
.fa-volume-down:before{content:"\f027"}
|
||||
.fa-volume-up:before{content:"\f028"}
|
||||
.fa-qrcode:before{content:"\f029"}
|
||||
.fa-barcode:before{content:"\f02a"}
|
||||
.fa-tag:before{content:"\f02b"}
|
||||
.fa-tags:before{content:"\f02c"}
|
||||
.fa-book:before{content:"\f02d"}
|
||||
.fa-bookmark:before{content:"\f02e"}
|
||||
.fa-print:before{content:"\f02f"}
|
||||
.fa-camera:before{content:"\f030"}
|
||||
.fa-font:before{content:"\f031"}
|
||||
.fa-bold:before{content:"\f032"}
|
||||
.fa-italic:before{content:"\f033"}
|
||||
.fa-text-height:before{content:"\f034"}
|
||||
.fa-text-width:before{content:"\f035"}
|
||||
.fa-align-left:before{content:"\f036"}
|
||||
.fa-align-center:before{content:"\f037"}
|
||||
.fa-align-right:before{content:"\f038"}
|
||||
.fa-align-justify:before{content:"\f039"}
|
||||
.fa-list:before{content:"\f03a"}
|
||||
.fa-dedent:before,.fa-outdent:before{content:"\f03b"}
|
||||
.fa-indent:before{content:"\f03c"}
|
||||
.fa-video-camera:before{content:"\f03d"}
|
||||
.fa-photo:before,.fa-image:before,.fa-picture-o:before{content:"\f03e"}
|
||||
.fa-pencil:before{content:"\f040"}
|
||||
.fa-map-marker:before{content:"\f041"}
|
||||
.fa-adjust:before{content:"\f042"}
|
||||
.fa-tint:before{content:"\f043"}
|
||||
.fa-edit:before,.fa-pencil-square-o:before{content:"\f044"}
|
||||
.fa-share-square-o:before{content:"\f045"}
|
||||
.fa-check-square-o:before{content:"\f046"}
|
||||
.fa-arrows:before{content:"\f047"}
|
||||
.fa-step-backward:before{content:"\f048"}
|
||||
.fa-fast-backward:before{content:"\f049"}
|
||||
.fa-backward:before{content:"\f04a"}
|
||||
.fa-play:before{content:"\f04b"}
|
||||
.fa-pause:before{content:"\f04c"}
|
||||
.fa-stop:before{content:"\f04d"}
|
||||
.fa-forward:before{content:"\f04e"}
|
||||
.fa-fast-forward:before{content:"\f050"}
|
||||
.fa-step-forward:before{content:"\f051"}
|
||||
.fa-eject:before{content:"\f052"}
|
||||
.fa-chevron-left:before{content:"\f053"}
|
||||
.fa-chevron-right:before{content:"\f054"}
|
||||
.fa-plus-circle:before{content:"\f055"}
|
||||
.fa-minus-circle:before{content:"\f056"}
|
||||
.fa-times-circle:before{content:"\f057"}
|
||||
.fa-check-circle:before{content:"\f058"}
|
||||
.fa-question-circle:before{content:"\f059"}
|
||||
.fa-info-circle:before{content:"\f05a"}
|
||||
.fa-crosshairs:before{content:"\f05b"}
|
||||
.fa-times-circle-o:before{content:"\f05c"}
|
||||
.fa-check-circle-o:before{content:"\f05d"}
|
||||
.fa-ban:before{content:"\f05e"}
|
||||
.fa-arrow-left:before{content:"\f060"}
|
||||
.fa-arrow-right:before{content:"\f061"}
|
||||
.fa-arrow-up:before{content:"\f062"}
|
||||
.fa-arrow-down:before{content:"\f063"}
|
||||
.fa-mail-forward:before,.fa-share:before{content:"\f064"}
|
||||
.fa-expand:before{content:"\f065"}
|
||||
.fa-compress:before{content:"\f066"}
|
||||
.fa-plus:before{content:"\f067"}
|
||||
.fa-minus:before{content:"\f068"}
|
||||
.fa-asterisk:before{content:"\f069"}
|
||||
.fa-exclamation-circle:before{content:"\f06a"}
|
||||
.fa-gift:before{content:"\f06b"}
|
||||
.fa-leaf:before{content:"\f06c"}
|
||||
.fa-fire:before{content:"\f06d"}
|
||||
.fa-eye:before{content:"\f06e"}
|
||||
.fa-eye-slash:before{content:"\f070"}
|
||||
.fa-warning:before,.fa-exclamation-triangle:before{content:"\f071"}
|
||||
.fa-plane:before{content:"\f072"}
|
||||
.fa-calendar:before{content:"\f073"}
|
||||
.fa-random:before{content:"\f074"}
|
||||
.fa-comment:before{content:"\f075"}
|
||||
.fa-magnet:before{content:"\f076"}
|
||||
.fa-chevron-up:before{content:"\f077"}
|
||||
.fa-chevron-down:before{content:"\f078"}
|
||||
.fa-retweet:before{content:"\f079"}
|
||||
.fa-shopping-cart:before{content:"\f07a"}
|
||||
.fa-folder:before{content:"\f07b"}
|
||||
.fa-folder-open:before{content:"\f07c"}
|
||||
.fa-arrows-v:before{content:"\f07d"}
|
||||
.fa-arrows-h:before{content:"\f07e"}
|
||||
.fa-bar-chart-o:before,.fa-bar-chart:before{content:"\f080"}
|
||||
.fa-twitter-square:before{content:"\f081"}
|
||||
.fa-facebook-square:before{content:"\f082"}
|
||||
.fa-camera-retro:before{content:"\f083"}
|
||||
.fa-key:before{content:"\f084"}
|
||||
.fa-gears:before,.fa-cogs:before{content:"\f085"}
|
||||
.fa-comments:before{content:"\f086"}
|
||||
.fa-thumbs-o-up:before{content:"\f087"}
|
||||
.fa-thumbs-o-down:before{content:"\f088"}
|
||||
.fa-star-half:before{content:"\f089"}
|
||||
.fa-heart-o:before{content:"\f08a"}
|
||||
.fa-sign-out:before{content:"\f08b"}
|
||||
.fa-linkedin-square:before{content:"\f08c"}
|
||||
.fa-thumb-tack:before{content:"\f08d"}
|
||||
.fa-external-link:before{content:"\f08e"}
|
||||
.fa-sign-in:before{content:"\f090"}
|
||||
.fa-trophy:before{content:"\f091"}
|
||||
.fa-github-square:before{content:"\f092"}
|
||||
.fa-upload:before{content:"\f093"}
|
||||
.fa-lemon-o:before{content:"\f094"}
|
||||
.fa-phone:before{content:"\f095"}
|
||||
.fa-square-o:before{content:"\f096"}
|
||||
.fa-bookmark-o:before{content:"\f097"}
|
||||
.fa-phone-square:before{content:"\f098"}
|
||||
.fa-twitter:before{content:"\f099"}
|
||||
.fa-facebook-f:before,.fa-facebook:before{content:"\f09a"}
|
||||
.fa-github:before{content:"\f09b"}
|
||||
.fa-unlock:before{content:"\f09c"}
|
||||
.fa-credit-card:before{content:"\f09d"}
|
||||
.fa-rss:before{content:"\f09e"}
|
||||
.fa-hdd-o:before{content:"\f0a0"}
|
||||
.fa-bullhorn:before{content:"\f0a1"}
|
||||
.fa-bell:before{content:"\f0f3"}
|
||||
.fa-certificate:before{content:"\f0a3"}
|
||||
.fa-hand-o-right:before{content:"\f0a4"}
|
||||
.fa-hand-o-left:before{content:"\f0a5"}
|
||||
.fa-hand-o-up:before{content:"\f0a6"}
|
||||
.fa-hand-o-down:before{content:"\f0a7"}
|
||||
.fa-arrow-circle-left:before{content:"\f0a8"}
|
||||
.fa-arrow-circle-right:before{content:"\f0a9"}
|
||||
.fa-arrow-circle-up:before{content:"\f0aa"}
|
||||
.fa-arrow-circle-down:before{content:"\f0ab"}
|
||||
.fa-globe:before{content:"\f0ac"}
|
||||
.fa-wrench:before{content:"\f0ad"}
|
||||
.fa-tasks:before{content:"\f0ae"}
|
||||
.fa-filter:before{content:"\f0b0"}
|
||||
.fa-briefcase:before{content:"\f0b1"}
|
||||
.fa-arrows-alt:before{content:"\f0b2"}
|
||||
.fa-group:before,.fa-users:before{content:"\f0c0"}
|
||||
.fa-chain:before,.fa-link:before{content:"\f0c1"}
|
||||
.fa-cloud:before{content:"\f0c2"}
|
||||
.fa-flask:before{content:"\f0c3"}
|
||||
.fa-cut:before,.fa-scissors:before{content:"\f0c4"}
|
||||
.fa-copy:before,.fa-files-o:before{content:"\f0c5"}
|
||||
.fa-paperclip:before{content:"\f0c6"}
|
||||
.fa-save:before,.fa-floppy-o:before{content:"\f0c7"}
|
||||
.fa-square:before{content:"\f0c8"}
|
||||
.fa-navicon:before,.fa-reorder:before,.fa-bars:before{content:"\f0c9"}
|
||||
.fa-list-ul:before{content:"\f0ca"}
|
||||
.fa-list-ol:before{content:"\f0cb"}
|
||||
.fa-strikethrough:before{content:"\f0cc"}
|
||||
.fa-underline:before{content:"\f0cd"}
|
||||
.fa-table:before{content:"\f0ce"}
|
||||
.fa-magic:before{content:"\f0d0"}
|
||||
.fa-truck:before{content:"\f0d1"}
|
||||
.fa-pinterest:before{content:"\f0d2"}
|
||||
.fa-pinterest-square:before{content:"\f0d3"}
|
||||
.fa-google-plus-square:before{content:"\f0d4"}
|
||||
.fa-google-plus:before{content:"\f0d5"}
|
||||
.fa-money:before{content:"\f0d6"}
|
||||
.fa-caret-down:before{content:"\f0d7"}
|
||||
.fa-caret-up:before{content:"\f0d8"}
|
||||
.fa-caret-left:before{content:"\f0d9"}
|
||||
.fa-caret-right:before{content:"\f0da"}
|
||||
.fa-columns:before{content:"\f0db"}
|
||||
.fa-unsorted:before,.fa-sort:before{content:"\f0dc"}
|
||||
.fa-sort-down:before,.fa-sort-desc:before{content:"\f0dd"}
|
||||
.fa-sort-up:before,.fa-sort-asc:before{content:"\f0de"}
|
||||
.fa-envelope:before{content:"\f0e0"}
|
||||
.fa-linkedin:before{content:"\f0e1"}
|
||||
.fa-rotate-left:before,.fa-undo:before{content:"\f0e2"}
|
||||
.fa-legal:before,.fa-gavel:before{content:"\f0e3"}
|
||||
.fa-dashboard:before,.fa-tachometer:before{content:"\f0e4"}
|
||||
.fa-comment-o:before{content:"\f0e5"}
|
||||
.fa-comments-o:before{content:"\f0e6"}
|
||||
.fa-flash:before,.fa-bolt:before{content:"\f0e7"}
|
||||
.fa-sitemap:before{content:"\f0e8"}
|
||||
.fa-umbrella:before{content:"\f0e9"}
|
||||
.fa-paste:before,.fa-clipboard:before{content:"\f0ea"}
|
||||
.fa-lightbulb-o:before{content:"\f0eb"}
|
||||
.fa-exchange:before{content:"\f0ec"}
|
||||
.fa-cloud-download:before{content:"\f0ed"}
|
||||
.fa-cloud-upload:before{content:"\f0ee"}
|
||||
.fa-user-md:before{content:"\f0f0"}
|
||||
.fa-stethoscope:before{content:"\f0f1"}
|
||||
.fa-suitcase:before{content:"\f0f2"}
|
||||
.fa-bell-o:before{content:"\f0a2"}
|
||||
.fa-coffee:before{content:"\f0f4"}
|
||||
.fa-cutlery:before{content:"\f0f5"}
|
||||
.fa-file-text-o:before{content:"\f0f6"}
|
||||
.fa-building-o:before{content:"\f0f7"}
|
||||
.fa-hospital-o:before{content:"\f0f8"}
|
||||
.fa-ambulance:before{content:"\f0f9"}
|
||||
.fa-medkit:before{content:"\f0fa"}
|
||||
.fa-fighter-jet:before{content:"\f0fb"}
|
||||
.fa-beer:before{content:"\f0fc"}
|
||||
.fa-h-square:before{content:"\f0fd"}
|
||||
.fa-plus-square:before{content:"\f0fe"}
|
||||
.fa-angle-double-left:before{content:"\f100"}
|
||||
.fa-angle-double-right:before{content:"\f101"}
|
||||
.fa-angle-double-up:before{content:"\f102"}
|
||||
.fa-angle-double-down:before{content:"\f103"}
|
||||
.fa-angle-left:before{content:"\f104"}
|
||||
.fa-angle-right:before{content:"\f105"}
|
||||
.fa-angle-up:before{content:"\f106"}
|
||||
.fa-angle-down:before{content:"\f107"}
|
||||
.fa-desktop:before{content:"\f108"}
|
||||
.fa-laptop:before{content:"\f109"}
|
||||
.fa-tablet:before{content:"\f10a"}
|
||||
.fa-mobile-phone:before,.fa-mobile:before{content:"\f10b"}
|
||||
.fa-circle-o:before{content:"\f10c"}
|
||||
.fa-quote-left:before{content:"\f10d"}
|
||||
.fa-quote-right:before{content:"\f10e"}
|
||||
.fa-spinner:before{content:"\f110"}
|
||||
.fa-circle:before{content:"\f111"}
|
||||
.fa-mail-reply:before,.fa-reply:before{content:"\f112"}
|
||||
.fa-github-alt:before{content:"\f113"}
|
||||
.fa-folder-o:before{content:"\f114"}
|
||||
.fa-folder-open-o:before{content:"\f115"}
|
||||
.fa-smile-o:before{content:"\f118"}
|
||||
.fa-frown-o:before{content:"\f119"}
|
||||
.fa-meh-o:before{content:"\f11a"}
|
||||
.fa-gamepad:before{content:"\f11b"}
|
||||
.fa-keyboard-o:before{content:"\f11c"}
|
||||
.fa-flag-o:before{content:"\f11d"}
|
||||
.fa-flag-checkered:before{content:"\f11e"}
|
||||
.fa-terminal:before{content:"\f120"}
|
||||
.fa-code:before{content:"\f121"}
|
||||
.fa-mail-reply-all:before,.fa-reply-all:before{content:"\f122"}
|
||||
.fa-star-half-empty:before,.fa-star-half-full:before,.fa-star-half-o:before{content:"\f123"}
|
||||
.fa-location-arrow:before{content:"\f124"}
|
||||
.fa-crop:before{content:"\f125"}
|
||||
.fa-code-fork:before{content:"\f126"}
|
||||
.fa-unlink:before,.fa-chain-broken:before{content:"\f127"}
|
||||
.fa-question:before{content:"\f128"}
|
||||
.fa-info:before{content:"\f129"}
|
||||
.fa-exclamation:before{content:"\f12a"}
|
||||
.fa-superscript:before{content:"\f12b"}
|
||||
.fa-subscript:before{content:"\f12c"}
|
||||
.fa-eraser:before{content:"\f12d"}
|
||||
.fa-puzzle-piece:before{content:"\f12e"}
|
||||
.fa-microphone:before{content:"\f130"}
|
||||
.fa-microphone-slash:before{content:"\f131"}
|
||||
.fa-shield:before{content:"\f132"}
|
||||
.fa-calendar-o:before{content:"\f133"}
|
||||
.fa-fire-extinguisher:before{content:"\f134"}
|
||||
.fa-rocket:before{content:"\f135"}
|
||||
.fa-maxcdn:before{content:"\f136"}
|
||||
.fa-chevron-circle-left:before{content:"\f137"}
|
||||
.fa-chevron-circle-right:before{content:"\f138"}
|
||||
.fa-chevron-circle-up:before{content:"\f139"}
|
||||
.fa-chevron-circle-down:before{content:"\f13a"}
|
||||
.fa-html5:before{content:"\f13b"}
|
||||
.fa-css3:before{content:"\f13c"}
|
||||
.fa-anchor:before{content:"\f13d"}
|
||||
.fa-unlock-alt:before{content:"\f13e"}
|
||||
.fa-bullseye:before{content:"\f140"}
|
||||
.fa-ellipsis-h:before{content:"\f141"}
|
||||
.fa-ellipsis-v:before{content:"\f142"}
|
||||
.fa-rss-square:before{content:"\f143"}
|
||||
.fa-play-circle:before{content:"\f144"}
|
||||
.fa-ticket:before{content:"\f145"}
|
||||
.fa-minus-square:before{content:"\f146"}
|
||||
.fa-minus-square-o:before{content:"\f147"}
|
||||
.fa-level-up:before{content:"\f148"}
|
||||
.fa-level-down:before{content:"\f149"}
|
||||
.fa-check-square:before{content:"\f14a"}
|
||||
.fa-pencil-square:before{content:"\f14b"}
|
||||
.fa-external-link-square:before{content:"\f14c"}
|
||||
.fa-share-square:before{content:"\f14d"}
|
||||
.fa-compass:before{content:"\f14e"}
|
||||
.fa-toggle-down:before,.fa-caret-square-o-down:before{content:"\f150"}
|
||||
.fa-toggle-up:before,.fa-caret-square-o-up:before{content:"\f151"}
|
||||
.fa-toggle-right:before,.fa-caret-square-o-right:before{content:"\f152"}
|
||||
.fa-euro:before,.fa-eur:before{content:"\f153"}
|
||||
.fa-gbp:before{content:"\f154"}
|
||||
.fa-dollar:before,.fa-usd:before{content:"\f155"}
|
||||
.fa-rupee:before,.fa-inr:before{content:"\f156"}
|
||||
.fa-cny:before,.fa-rmb:before,.fa-yen:before,.fa-jpy:before{content:"\f157"}
|
||||
.fa-ruble:before,.fa-rouble:before,.fa-rub:before{content:"\f158"}
|
||||
.fa-won:before,.fa-krw:before{content:"\f159"}
|
||||
.fa-bitcoin:before,.fa-btc:before{content:"\f15a"}
|
||||
.fa-file:before{content:"\f15b"}
|
||||
.fa-file-text:before{content:"\f15c"}
|
||||
.fa-sort-alpha-asc:before{content:"\f15d"}
|
||||
.fa-sort-alpha-desc:before{content:"\f15e"}
|
||||
.fa-sort-amount-asc:before{content:"\f160"}
|
||||
.fa-sort-amount-desc:before{content:"\f161"}
|
||||
.fa-sort-numeric-asc:before{content:"\f162"}
|
||||
.fa-sort-numeric-desc:before{content:"\f163"}
|
||||
.fa-thumbs-up:before{content:"\f164"}
|
||||
.fa-thumbs-down:before{content:"\f165"}
|
||||
.fa-youtube-square:before{content:"\f166"}
|
||||
.fa-youtube:before{content:"\f167"}
|
||||
.fa-xing:before{content:"\f168"}
|
||||
.fa-xing-square:before{content:"\f169"}
|
||||
.fa-youtube-play:before{content:"\f16a"}
|
||||
.fa-dropbox:before{content:"\f16b"}
|
||||
.fa-stack-overflow:before{content:"\f16c"}
|
||||
.fa-instagram:before{content:"\f16d"}
|
||||
.fa-flickr:before{content:"\f16e"}
|
||||
.fa-adn:before{content:"\f170"}
|
||||
.fa-bitbucket:before{content:"\f171"}
|
||||
.fa-bitbucket-square:before{content:"\f172"}
|
||||
.fa-tumblr:before{content:"\f173"}
|
||||
.fa-tumblr-square:before{content:"\f174"}
|
||||
.fa-long-arrow-down:before{content:"\f175"}
|
||||
.fa-long-arrow-up:before{content:"\f176"}
|
||||
.fa-long-arrow-left:before{content:"\f177"}
|
||||
.fa-long-arrow-right:before{content:"\f178"}
|
||||
.fa-apple:before{content:"\f179"}
|
||||
.fa-windows:before{content:"\f17a"}
|
||||
.fa-android:before{content:"\f17b"}
|
||||
.fa-linux:before{content:"\f17c"}
|
||||
.fa-dribbble:before{content:"\f17d"}
|
||||
.fa-skype:before{content:"\f17e"}
|
||||
.fa-foursquare:before{content:"\f180"}
|
||||
.fa-trello:before{content:"\f181"}
|
||||
.fa-female:before{content:"\f182"}
|
||||
.fa-male:before{content:"\f183"}
|
||||
.fa-gittip:before,.fa-gratipay:before{content:"\f184"}
|
||||
.fa-sun-o:before{content:"\f185"}
|
||||
.fa-moon-o:before{content:"\f186"}
|
||||
.fa-archive:before{content:"\f187"}
|
||||
.fa-bug:before{content:"\f188"}
|
||||
.fa-vk:before{content:"\f189"}
|
||||
.fa-weibo:before{content:"\f18a"}
|
||||
.fa-renren:before{content:"\f18b"}
|
||||
.fa-pagelines:before{content:"\f18c"}
|
||||
.fa-stack-exchange:before{content:"\f18d"}
|
||||
.fa-arrow-circle-o-right:before{content:"\f18e"}
|
||||
.fa-arrow-circle-o-left:before{content:"\f190"}
|
||||
.fa-toggle-left:before,.fa-caret-square-o-left:before{content:"\f191"}
|
||||
.fa-dot-circle-o:before{content:"\f192"}
|
||||
.fa-wheelchair:before{content:"\f193"}
|
||||
.fa-vimeo-square:before{content:"\f194"}
|
||||
.fa-turkish-lira:before,.fa-try:before{content:"\f195"}
|
||||
.fa-plus-square-o:before{content:"\f196"}
|
||||
.fa-space-shuttle:before{content:"\f197"}
|
||||
.fa-slack:before{content:"\f198"}
|
||||
.fa-envelope-square:before{content:"\f199"}
|
||||
.fa-wordpress:before{content:"\f19a"}
|
||||
.fa-openid:before{content:"\f19b"}
|
||||
.fa-institution:before,.fa-bank:before,.fa-university:before{content:"\f19c"}
|
||||
.fa-mortar-board:before,.fa-graduation-cap:before{content:"\f19d"}
|
||||
.fa-yahoo:before{content:"\f19e"}
|
||||
.fa-google:before{content:"\f1a0"}
|
||||
.fa-reddit:before{content:"\f1a1"}
|
||||
.fa-reddit-square:before{content:"\f1a2"}
|
||||
.fa-stumbleupon-circle:before{content:"\f1a3"}
|
||||
.fa-stumbleupon:before{content:"\f1a4"}
|
||||
.fa-delicious:before{content:"\f1a5"}
|
||||
.fa-digg:before{content:"\f1a6"}
|
||||
.fa-pied-piper:before{content:"\f1a7"}
|
||||
.fa-pied-piper-alt:before{content:"\f1a8"}
|
||||
.fa-drupal:before{content:"\f1a9"}
|
||||
.fa-joomla:before{content:"\f1aa"}
|
||||
.fa-language:before{content:"\f1ab"}
|
||||
.fa-fax:before{content:"\f1ac"}
|
||||
.fa-building:before{content:"\f1ad"}
|
||||
.fa-child:before{content:"\f1ae"}
|
||||
.fa-paw:before{content:"\f1b0"}
|
||||
.fa-spoon:before{content:"\f1b1"}
|
||||
.fa-cube:before{content:"\f1b2"}
|
||||
.fa-cubes:before{content:"\f1b3"}
|
||||
.fa-behance:before{content:"\f1b4"}
|
||||
.fa-behance-square:before{content:"\f1b5"}
|
||||
.fa-steam:before{content:"\f1b6"}
|
||||
.fa-steam-square:before{content:"\f1b7"}
|
||||
.fa-recycle:before{content:"\f1b8"}
|
||||
.fa-automobile:before,.fa-car:before{content:"\f1b9"}
|
||||
.fa-cab:before,.fa-taxi:before{content:"\f1ba"}
|
||||
.fa-tree:before{content:"\f1bb"}
|
||||
.fa-spotify:before{content:"\f1bc"}
|
||||
.fa-deviantart:before{content:"\f1bd"}
|
||||
.fa-soundcloud:before{content:"\f1be"}
|
||||
.fa-database:before{content:"\f1c0"}
|
||||
.fa-file-pdf-o:before{content:"\f1c1"}
|
||||
.fa-file-word-o:before{content:"\f1c2"}
|
||||
.fa-file-excel-o:before{content:"\f1c3"}
|
||||
.fa-file-powerpoint-o:before{content:"\f1c4"}
|
||||
.fa-file-photo-o:before,.fa-file-picture-o:before,.fa-file-image-o:before{content:"\f1c5"}
|
||||
.fa-file-zip-o:before,.fa-file-archive-o:before{content:"\f1c6"}
|
||||
.fa-file-sound-o:before,.fa-file-audio-o:before{content:"\f1c7"}
|
||||
.fa-file-movie-o:before,.fa-file-video-o:before{content:"\f1c8"}
|
||||
.fa-file-code-o:before{content:"\f1c9"}
|
||||
.fa-vine:before{content:"\f1ca"}
|
||||
.fa-codepen:before{content:"\f1cb"}
|
||||
.fa-jsfiddle:before{content:"\f1cc"}
|
||||
.fa-life-bouy:before,.fa-life-buoy:before,.fa-life-saver:before,.fa-support:before,.fa-life-ring:before{content:"\f1cd"}
|
||||
.fa-circle-o-notch:before{content:"\f1ce"}
|
||||
.fa-ra:before,.fa-rebel:before{content:"\f1d0"}
|
||||
.fa-ge:before,.fa-empire:before{content:"\f1d1"}
|
||||
.fa-git-square:before{content:"\f1d2"}
|
||||
.fa-git:before{content:"\f1d3"}
|
||||
.fa-hacker-news:before{content:"\f1d4"}
|
||||
.fa-tencent-weibo:before{content:"\f1d5"}
|
||||
.fa-qq:before{content:"\f1d6"}
|
||||
.fa-wechat:before,.fa-weixin:before{content:"\f1d7"}
|
||||
.fa-send:before,.fa-paper-plane:before{content:"\f1d8"}
|
||||
.fa-send-o:before,.fa-paper-plane-o:before{content:"\f1d9"}
|
||||
.fa-history:before{content:"\f1da"}
|
||||
.fa-genderless:before,.fa-circle-thin:before{content:"\f1db"}
|
||||
.fa-header:before{content:"\f1dc"}
|
||||
.fa-paragraph:before{content:"\f1dd"}
|
||||
.fa-sliders:before{content:"\f1de"}
|
||||
.fa-share-alt:before{content:"\f1e0"}
|
||||
.fa-share-alt-square:before{content:"\f1e1"}
|
||||
.fa-bomb:before{content:"\f1e2"}
|
||||
.fa-soccer-ball-o:before,.fa-futbol-o:before{content:"\f1e3"}
|
||||
.fa-tty:before{content:"\f1e4"}
|
||||
.fa-binoculars:before{content:"\f1e5"}
|
||||
.fa-plug:before{content:"\f1e6"}
|
||||
.fa-slideshare:before{content:"\f1e7"}
|
||||
.fa-twitch:before{content:"\f1e8"}
|
||||
.fa-yelp:before{content:"\f1e9"}
|
||||
.fa-newspaper-o:before{content:"\f1ea"}
|
||||
.fa-wifi:before{content:"\f1eb"}
|
||||
.fa-calculator:before{content:"\f1ec"}
|
||||
.fa-paypal:before{content:"\f1ed"}
|
||||
.fa-google-wallet:before{content:"\f1ee"}
|
||||
.fa-cc-visa:before{content:"\f1f0"}
|
||||
.fa-cc-mastercard:before{content:"\f1f1"}
|
||||
.fa-cc-discover:before{content:"\f1f2"}
|
||||
.fa-cc-amex:before{content:"\f1f3"}
|
||||
.fa-cc-paypal:before{content:"\f1f4"}
|
||||
.fa-cc-stripe:before{content:"\f1f5"}
|
||||
.fa-bell-slash:before{content:"\f1f6"}
|
||||
.fa-bell-slash-o:before{content:"\f1f7"}
|
||||
.fa-trash:before{content:"\f1f8"}
|
||||
.fa-copyright:before{content:"\f1f9"}
|
||||
.fa-at:before{content:"\f1fa"}
|
||||
.fa-eyedropper:before{content:"\f1fb"}
|
||||
.fa-paint-brush:before{content:"\f1fc"}
|
||||
.fa-birthday-cake:before{content:"\f1fd"}
|
||||
.fa-area-chart:before{content:"\f1fe"}
|
||||
.fa-pie-chart:before{content:"\f200"}
|
||||
.fa-line-chart:before{content:"\f201"}
|
||||
.fa-lastfm:before{content:"\f202"}
|
||||
.fa-lastfm-square:before{content:"\f203"}
|
||||
.fa-toggle-off:before{content:"\f204"}
|
||||
.fa-toggle-on:before{content:"\f205"}
|
||||
.fa-bicycle:before{content:"\f206"}
|
||||
.fa-bus:before{content:"\f207"}
|
||||
.fa-ioxhost:before{content:"\f208"}
|
||||
.fa-angellist:before{content:"\f209"}
|
||||
.fa-cc:before{content:"\f20a"}
|
||||
.fa-shekel:before,.fa-sheqel:before,.fa-ils:before{content:"\f20b"}
|
||||
.fa-meanpath:before{content:"\f20c"}
|
||||
.fa-buysellads:before{content:"\f20d"}
|
||||
.fa-connectdevelop:before{content:"\f20e"}
|
||||
.fa-dashcube:before{content:"\f210"}
|
||||
.fa-forumbee:before{content:"\f211"}
|
||||
.fa-leanpub:before{content:"\f212"}
|
||||
.fa-sellsy:before{content:"\f213"}
|
||||
.fa-shirtsinbulk:before{content:"\f214"}
|
||||
.fa-simplybuilt:before{content:"\f215"}
|
||||
.fa-skyatlas:before{content:"\f216"}
|
||||
.fa-cart-plus:before{content:"\f217"}
|
||||
.fa-cart-arrow-down:before{content:"\f218"}
|
||||
.fa-diamond:before{content:"\f219"}
|
||||
.fa-ship:before{content:"\f21a"}
|
||||
.fa-user-secret:before{content:"\f21b"}
|
||||
.fa-motorcycle:before{content:"\f21c"}
|
||||
.fa-street-view:before{content:"\f21d"}
|
||||
.fa-heartbeat:before{content:"\f21e"}
|
||||
.fa-venus:before{content:"\f221"}
|
||||
.fa-mars:before{content:"\f222"}
|
||||
.fa-mercury:before{content:"\f223"}
|
||||
.fa-transgender:before{content:"\f224"}
|
||||
.fa-transgender-alt:before{content:"\f225"}
|
||||
.fa-venus-double:before{content:"\f226"}
|
||||
.fa-mars-double:before{content:"\f227"}
|
||||
.fa-venus-mars:before{content:"\f228"}
|
||||
.fa-mars-stroke:before{content:"\f229"}
|
||||
.fa-mars-stroke-v:before{content:"\f22a"}
|
||||
.fa-mars-stroke-h:before{content:"\f22b"}
|
||||
.fa-neuter:before{content:"\f22c"}
|
||||
.fa-facebook-official:before{content:"\f230"}
|
||||
.fa-pinterest-p:before{content:"\f231"}
|
||||
.fa-whatsapp:before{content:"\f232"}
|
||||
.fa-server:before{content:"\f233"}
|
||||
.fa-user-plus:before{content:"\f234"}
|
||||
.fa-user-times:before{content:"\f235"}
|
||||
.fa-hotel:before,.fa-bed:before{content:"\f236"}
|
||||
.fa-viacoin:before{content:"\f237"}
|
||||
.fa-train:before{content:"\f238"}
|
||||
.fa-subway:before{content:"\f239"}
|
||||
.fa-medium:before{content:"\f23a"}
|
||||
Executable
+392
@@ -0,0 +1,392 @@
|
||||
body, html {
|
||||
height: 100%;
|
||||
margin: 0;
|
||||
font-family: Arial;
|
||||
}
|
||||
|
||||
.active, .cfgheader:hover {
|
||||
background-color: #ccc;
|
||||
}
|
||||
.cfgpanel {
|
||||
}
|
||||
|
||||
th.cfg {
|
||||
padding:5pt
|
||||
}
|
||||
table.stat {
|
||||
margin:0px 0px 5px 0px;
|
||||
}
|
||||
|
||||
.hamburger {
|
||||
position: relative;
|
||||
display: inline-block;
|
||||
width: 1.25em;
|
||||
height: 0.8em;
|
||||
margin-right: 0.3em;
|
||||
border-top: 0.2em solid #fff;
|
||||
border-bottom: 0.2em solid #fff;
|
||||
}
|
||||
|
||||
.hamburger:before {
|
||||
content: "";
|
||||
position: absolute;
|
||||
top: 0.3em;
|
||||
left: 0px;
|
||||
width: 100%;
|
||||
border-top: 0.2em solid #fff;
|
||||
}
|
||||
|
||||
.wrapper {
|
||||
height: 100%;
|
||||
display: flex;
|
||||
flex-direction: column;
|
||||
margin: 0;
|
||||
}
|
||||
.tci {
|
||||
flex-grow: 1; border: none; margin: 0; padding: 0;
|
||||
}
|
||||
.footer {
|
||||
background-color: #333;
|
||||
display: flex;
|
||||
justify-content: space-between;
|
||||
}
|
||||
|
||||
td.ch {
|
||||
text-align: right;
|
||||
padding: 0px 8px;
|
||||
}
|
||||
td.act {
|
||||
text-align: center;
|
||||
}
|
||||
table, th, td {
|
||||
border: 1px solid black;
|
||||
border-collapse: collapse;
|
||||
background-color: #ddd
|
||||
}
|
||||
|
||||
td#caption {
|
||||
text-align: center;
|
||||
background-color: #aaa;
|
||||
font-weight: bold;
|
||||
}
|
||||
|
||||
td#sfreq {
|
||||
background-color: #ccc;
|
||||
}
|
||||
|
||||
.content {
|
||||
display: flex;
|
||||
flex: 1;
|
||||
flex-direction: column;
|
||||
overflow: auto;
|
||||
height: 100%;
|
||||
}
|
||||
.tabcontent {
|
||||
display: none;
|
||||
flex: 1;
|
||||
border-top: none;
|
||||
flex-direction: column;
|
||||
overflow: auto;
|
||||
}
|
||||
|
||||
html {
|
||||
font-family: Helvetica;
|
||||
display: inline-block;
|
||||
margin: 0px auto;
|
||||
text-align: center;
|
||||
}
|
||||
h1{
|
||||
color: #0F3376;
|
||||
font-size: 24px
|
||||
}
|
||||
p{
|
||||
font-size: 1.5rem;
|
||||
}
|
||||
|
||||
.button2 {
|
||||
background-color: #f44336;
|
||||
}
|
||||
:disabled.save {
|
||||
opacity: 0.5;
|
||||
}
|
||||
.save {
|
||||
background-color: #CC1111; /* 0F33C6; */
|
||||
border: white;
|
||||
border-width: 1;
|
||||
color: white;
|
||||
padding: 8px 30px;
|
||||
text-align: center;
|
||||
text-decoration: none;
|
||||
display: block;
|
||||
font-size: 14px;
|
||||
margin: 0
|
||||
}
|
||||
|
||||
.ttgoinfo {
|
||||
color: white;
|
||||
padding: 8px 10px;
|
||||
display: block;
|
||||
font-size: 14px;
|
||||
margin: 0
|
||||
}
|
||||
.ctlbtn {
|
||||
background-color: #ccc;
|
||||
border: black;
|
||||
border-width: 1;
|
||||
color: black;
|
||||
padding: 4px 30px;
|
||||
text-align: center;
|
||||
text-decoration: none;
|
||||
display: block;
|
||||
margin: 2;
|
||||
font-size: 4vh;
|
||||
}
|
||||
.update {
|
||||
margin: 0;
|
||||
display: block;
|
||||
}
|
||||
|
||||
#map {
|
||||
height: 100%;
|
||||
}
|
||||
|
||||
.leaflet-popup-content table, .leaflet-popup-content table td {
|
||||
border:0;
|
||||
background-color: white;
|
||||
}
|
||||
|
||||
.leaflet-popup-content table td:nth-child(2),.leaflet-popup-content table td:nth-child(5) {
|
||||
text-align: right;
|
||||
padding-left: 3px;
|
||||
}
|
||||
|
||||
.leaflet-popup-content table td:nth-child(3),.leaflet-popup-content table td:nth-child(6) {
|
||||
text-align: left;
|
||||
padding-right: 10px;
|
||||
}
|
||||
|
||||
.leaflet-gps{animation:fading 1s infinite}@keyframes fading{0%{opacity:0.7}50%{opacity:1}100%{opacity:0.7}}
|
||||
|
||||
.leaflet-gps::after {
|
||||
content: '🔵';
|
||||
}
|
||||
.leaflet-gps {
|
||||
margin-left: -7px !important;
|
||||
margin-top: -9px !important;
|
||||
}
|
||||
|
||||
.leaflet-burst::after {
|
||||
content: '💥';
|
||||
}
|
||||
.leaflet-burst {
|
||||
margin-left: -20px !important;
|
||||
margin-top: -22px !important;
|
||||
font-weight: bold;
|
||||
font-size: 30px;
|
||||
}
|
||||
|
||||
.leaflet-landing::after {
|
||||
content: '×';
|
||||
}
|
||||
|
||||
.leaflet-landing {
|
||||
margin-left: -13px !important;
|
||||
margin-top: -30px !important;
|
||||
font-weight: bold;
|
||||
font-size: 40px;
|
||||
}
|
||||
|
||||
|
||||
.leaflet-header {
|
||||
text-align: center;
|
||||
width: 250px;
|
||||
box-shadow: 0 1px 5px rgba(0,0,0,0.65);
|
||||
border-bottom-left-radius: 4px;
|
||||
border-bottom-right-radius: 4px;
|
||||
pointer-events: auto !important;
|
||||
}
|
||||
|
||||
.leaflet-header #settings {
|
||||
display: none;
|
||||
}
|
||||
|
||||
.leaflet-header label {
|
||||
display: block;
|
||||
margin-top: 5px;
|
||||
}
|
||||
.leaflet-header input {
|
||||
width: 80px;
|
||||
margin: 0 auto;
|
||||
}
|
||||
|
||||
.leaflet-header #submit {
|
||||
margin: 3px auto;
|
||||
}
|
||||
|
||||
.leaflet-footer {
|
||||
display:none;
|
||||
text-align: center;
|
||||
width: 180px;
|
||||
box-shadow: 0 1px 5px rgba(0,0,0,0.65);
|
||||
border-top-left-radius: 4px;
|
||||
border-top-right-radius: 4px;
|
||||
}
|
||||
|
||||
.leaflet-center {
|
||||
left:0;
|
||||
right:0;
|
||||
margin: 0 auto;
|
||||
padding: 5px;
|
||||
background: #fff;
|
||||
background: rgba(255, 255, 255, 0.8);
|
||||
}
|
||||
|
||||
.leaflet-header #sonde_detail {
|
||||
display:none;
|
||||
}
|
||||
|
||||
@media screen and (max-width: 600px) {
|
||||
.leaflet-control-attribution {
|
||||
-moz-transform: rotate(-90deg) translateX(100%);
|
||||
-ms-transform: rotate(-90deg) translateX(100%);
|
||||
-o-transform: rotate(-90deg) translateX(100%);;
|
||||
-webkit-transform: rotate(-90deg) translateX(100%);
|
||||
transform: rotate(-90deg) translateX(100%);
|
||||
-webkit-transform-origin: 100% 100%;
|
||||
-moz-transform-origin: 100% 100%;
|
||||
-ms-transform-origin: 100% 100%;
|
||||
-o-transform-origin: 100% 100%;
|
||||
transform-origin: 100% 100%;
|
||||
}
|
||||
}
|
||||
|
||||
.ldot {
|
||||
height: 15px;
|
||||
width: 15px;
|
||||
margin-top: 8px;
|
||||
margin-left: -1px;
|
||||
border-radius: 50%;
|
||||
display: inline-block;
|
||||
}
|
||||
|
||||
.ybg {
|
||||
background-color: orange;
|
||||
background-image: -webkit-gradient(linear, left top, left bottom, from(yellow), to(orange));
|
||||
background-image: linear-gradient(top, yellow, orange);
|
||||
}
|
||||
.gbg {
|
||||
background-color: green;
|
||||
background-image: -webkit-gradient(linear, left top, left bottom, from(lime), to(green));
|
||||
background-image: linear-gradient(top, lime, green);
|
||||
}
|
||||
.rbg {
|
||||
background-color: red;
|
||||
background-image: -webkit-gradient(linear, left top, left bottom, from(orange), to(red));
|
||||
background-image: linear-gradient(top, orange, red);
|
||||
}
|
||||
|
||||
#sonde_statbar .ldot {
|
||||
margin-right: 3px;
|
||||
}
|
||||
|
||||
/* Add a black background color to the top navigation */
|
||||
.topnav {
|
||||
background-color: #333;
|
||||
overflow: hidden;
|
||||
}
|
||||
|
||||
/* Style the links inside the navigation bar */
|
||||
.topnav a {
|
||||
float: left;
|
||||
display: block;
|
||||
color: #f2f2f2;
|
||||
text-align: center;
|
||||
padding: 14px 16px;
|
||||
text-decoration: none;
|
||||
font-size: 17px;
|
||||
}
|
||||
|
||||
/* Change the color of links on hover */
|
||||
.topnav a:hover {
|
||||
background-color: #ddd;
|
||||
color: black;
|
||||
}
|
||||
|
||||
/* Add an active class to highlight the current page */
|
||||
.topnav a.active {
|
||||
background-color: #04AA6D;
|
||||
color: white;
|
||||
}
|
||||
|
||||
/* Hide the link that should open and close the topnav on small screens */
|
||||
.topnav .icon {
|
||||
display: none;
|
||||
padding-bottom: 12px;
|
||||
padding-top: 11px;
|
||||
}
|
||||
|
||||
/* When the screen is less than 600 pixels wide, hide all links, except for the first one ("Home"). Show the link that contains should open and close the topnav (.icon) */
|
||||
@media screen and (max-width: 600px) {
|
||||
.topnav a:not(.active) {display: none;}
|
||||
.topnav a.icon {
|
||||
float: right;
|
||||
display: block;
|
||||
}
|
||||
}
|
||||
|
||||
/* The "responsive" class is added to the topnav with JavaScript when the user clicks on the icon. This class makes the topnav look good on small screens (display the links vertically instead of horizontally) */
|
||||
@media screen and (max-width: 600px) {
|
||||
.topnav.responsive {position: relative;}
|
||||
.topnav.responsive a.icon {
|
||||
position: absolute;
|
||||
right: 0;
|
||||
top: 0;
|
||||
}
|
||||
.topnav.responsive a {
|
||||
float: none;
|
||||
display: block;
|
||||
text-align: left;
|
||||
}
|
||||
}
|
||||
@media (prefers-color-scheme: dark) {
|
||||
body {
|
||||
background-color: #333;
|
||||
}
|
||||
h2{
|
||||
color: white;
|
||||
}
|
||||
table, th, td, .save, a.active {
|
||||
color: white;
|
||||
border: 1px solid grey;
|
||||
border-collapse: collapse;
|
||||
background-color: #333;
|
||||
}
|
||||
input, select, .tci, .warning {
|
||||
color: white;
|
||||
background-color: #333;
|
||||
}
|
||||
a:link, a:visited {
|
||||
color: #D3D3D3;
|
||||
}
|
||||
.topnav, td#sfreq {
|
||||
background-color: grey;
|
||||
}
|
||||
.topnav a:visited {
|
||||
color: white;
|
||||
}
|
||||
.ctlbtn {
|
||||
color: white;
|
||||
background-color: grey;
|
||||
}
|
||||
.leaflet-center {
|
||||
color: white;
|
||||
background-color: grey;
|
||||
}
|
||||
.leaflet-bar a {
|
||||
background-color: grey !important;
|
||||
}
|
||||
.leaflet-popup-content-wrapper, .leaflet-popup-tip {
|
||||
color: white !important;
|
||||
background: grey !important;
|
||||
}
|
||||
}
|
||||
Reference in New Issue
Block a user