RadioSonde/RadioSonde_FSK/data/config.txt
2022-08-24 08:32:29 +02:00

111 lines
3.0 KiB
Plaintext
Executable File

#-------------------------------#
# Hardware depending settings
#-------------------------------#
# pin: 255=disabled; x=button x+128=touch button
#button_pin=2
#button2_pin=4
# No specification in config file: try autodetection (gpio4 pin level at startup)
#button_pin=0
#button2_pin=255
#button2_axp=0
# LED port
#led_pout=-1
# OLED Setup is depending on hardware of LoRa board
# TTGO v1: SDA=4 SCL=15, RST=16
# TTGO v2: SDA=21 SCL=22, RST=16
# T-BEAM, OLED: SDA=21, SCL=22, RST=16
# T-BEAM, ILI9225: SDA=4, CLK=21, RS=2, RST=22, CS=0
# No specification in config file: try autodetection (gpio4 pin level at startup)
#
# disptype: 0=OLED, 1=ILI9225
#disptype=0
#oled_sda=21
#oled_scl=22
#oled_rst=16
oled_orient=1
gpsOn=0
gps_rxd=-1
gps_txd=-1
gps_lat=43.59169
gps_lon=7.10071
gps_alt=123
# Show AFC value (for RS41 only, maybe also DFM, but useful for RS92 or M10)
# showafc=1
# Frequency correction, in Hz
# freqofs=0
#-------------------------------#
# General config settings
#-------------------------------#
maxsonde=20
debug=0
# wifi mode: 1=client in background; 2=AP in background; 3=client on startup, ap if failure
wifi=3
# TCP/IP KISS TNC in port 14590 for APRSdroid (0=disabled, 1=enabled)
kisstnc.active = 1
mdnsname=radiosonde
# display configuration. List of "displays"
# first entry: "Scanner" display
# second entry: default "Receiver" display
# additional entries: alternative receiver display, activated by button
display=0,1,2,3,4,5,6
# set to -1 to disable (used for "N" values in timers in screens.txt). Value in seconds
norx_timeout=20
vbatmax=1.86
vbatmin=1.64
telemetryOn=0
buzzerOn=0
buzzerPort=12
buzzerFreq=700
dbsmetre=1
gainLNA=0
#-------------------------------#
# Spectrum display settings
#-------------------------------#
startfreq=400
channelbw=10
spectrum=30 #10
noisefloor=-125
marker=1
#-------------------------------#
# APRS settings
#-------------------------------#
call=FR2013
passcode=14003
#-------------------------------#
# Sonde specific settings: bandwidth
# valid values: 3100, 3900, 5200, 6300, 7800, 10400, 12500,
# 15600, 20800, 25000, ...
# other values will be rounded up to the next valid value
# rs92.alt2d: default altitude used by RS92 decoder if only 3 sats available
#-------------------------------#
rs41.agcbw=12500
rs41.rxbw=6300
rs92.rxbw=12500
rs92.alt2d=480
dfm.agcbw=20800
dfm.rxbw=10400
#-------------------------------#
# axudp for sending to aprsmap
#-------------------------------#
# local use only, do not feed to public services
# data not sanitized / quality checked, outliers not filtered out
axudp.active=1
axudp.host=fra1od.fr.to
axudp.port=14580
axudp.symbol=/O
axudp.highrate=1
axudp.idformat=0
#-------------------------------#
# maybe some time in the future
#-------------------------------#
# currently simply not implemented, no need to put anything here anyway
tcp.active=0
tcp.host=radiosondy.info
tcp.port=14590
tcp.symbol=/O
tcp.highrate=20
tcp.idformat=0
#-------------------------------#
# EOF
#-------------------------------#