SrvSVXLink/Installation/install.sh

#!/bin/bash
VERT="\\033[32m"
NORMAL="\\033[39m"
ROUGE="\\033[31m"
JAUNE="\\033[33m"

####################################################################################
#
#	Installation complète d'une configuration Spotnik V3.0 || V3.1
#	Pour Raspberry & BUSTER https://downloads.raspberrypi.org/raspbian_lite_latest
#
#	chmod +x install_Spotnik3.sh
#	sudo ./install_Spotnik3.sh
#
#	V 3.23 - 03-02-2020 	@TK4LS & @F8ASB & @F5SWB
#	
#
####################################################################################



SPOTNIK_VERSION="3.0"
#SPOTNIK_VERSION="3.1"
SVXLINK_CONF_FILE="/etc/spotnik/svxlink.cfg"
pathinstall="/opt/spotnik/spotnik2hmi_V2"

WD=$PWD
# PWD ROOT
sudo sh -c 'echo root:spotnik | chpasswd'
sed -i 's/#\?\(PermitRootLogin\s*\).*$/\1 yes/' /etc/ssh/sshd_config
service sshd reload

if [ $(id -u) != 0 ] ; then

	echo "Saisir le password 'spotnik'"
	su root
	
#  echo "Les droits de super-utilisateur (root) sont requis pour continuer l'instalation"
#  #echo "Veuillez lancer 'sudo $0' ou connectez-vous en tant que root, puis relancez $0"
#  echo "Connectez-vous en tant que 'root' avec la commande: 'su root'"
#  echo "paswword: 'spotnik'";
#  echo "puis relancez $0"
#  exit 1

fi


grep --binary-files=text -s -q '^Raspberry' /proc/device-tree/model && HDW='Raspberry' || HDW='Orange Pi'
rev=`awk '/^Revision/ {sub("^1000", "", $3); print $3}' /proc/cpuinfo`


apt_install() {
  apt-get -y install "$@"
  if [ $? -ne 0 ]; then
    echo -e "${ROUGE}Ne peut installer $@ - Annulation${NORMAL}"
    exit 1
  fi
}


update_upgrade() {
  echo "---------------------------------------------------------------------"
  echo -e "${JAUNE}Update & Upgrade RaspBian BUSTER${NORMAL}"
  apt-get update
  apt-get -y upgrade
  echo -e "${VERT}Update & Upgrade términé${NORMAL}"
}

install_mainpackage() {
	echo "---------------------------------------------------------------------"

	# apt_install lighttpd php htop toilet
	# apt-get -y remove net-tools
	# dpkg-reconfigure locales
		
	echo -e "${VERT}Installation des paquets terminée${NORMAL}"
}


install_nodejs() {
	echo "---------------------------------------------------------------------"
	echo -e "${JAUNE}Installation de NodeJS${NORMAL}"


	# ArmV6
	if [[ $(uname -m) =~ ^armv6 ]] ; then
		wget https://nodejs.org/dist/v11.9.0/node-v11.9.0-linux-armv6l.tar.xz
		tar -xzf node-v11.9.0-linux-armv6l.tar.xz
		cd node-v11.9.0-linux-armv6l/
		cp -R * /usr/local/
		rm -rf node-v11.9.0-linux-armv6l
		rm -f node-v11.9.0-linux-armv6l.tar.xz
		
	else
		curl -sL https://deb.nodesource.com/setup_13.x | bash -
		apt_install nodejs && npm install npm@latest -g
	fi
	
	echo -e "${VERT}Installation de NodeJS terminée${NORMAL}"
}



install_svxlink() {
	
	echo -e "${JAUNE}Installation des paquets nécéssaires pour Svxlink${NORMAL}"
	
	apt_install cmake libsigc++-2.0-dev libasound2-dev libpopt-dev libgcrypt20-dev tk-dev libgsm1-dev libspeex-dev libopus-dev groff build-essential git libfftw3-dev libusb-1.0-0-dev opus-tools librtlsdr-dev libcurl4-openssl-dev alsa-tools
	
	# Branch master
	#apt_install libjsoncpp-dev
	
	apt_install locales mc gawk fetchmail procmail tcllib sox avahi-daemon
	# apt_install lynx

	echo "---------------------------------------------------------------------"
	echo -e "${JAUNE}Installation de SvxLink${NORMAL}"
	
	if pgrep -x svxlink >/dev/null
	then
		pkill -TERM svxlink
	fi
	
	cd /usr/src
	
	# Récupère le source "svxlink 19.09.01" dans /usr/src
	wget https://github.com/sm0svx/svxlink/archive/19.09.1.tar.gz
	tar -xzf 19.09.1.tar.gz -C /usr/src/
	rm 19.09.1.tar.gz
	wget -O - ftp://ftp.f5nlg.ovh/DEV/SERVEUR_17.12/ReflectorClient.cpp > /usr/src/svxlink-19.09.1/src/svxlink/reflector/ReflectorClient.cpp
	wget -O - ftp://ftp.f5nlg.ovh/DEV/SERVEUR_17.12/ModuleMetarInfo.cpp > /usr/src/svxlink-19.09.1/src/svxlink/modules/metarinfo/ModuleMetarInfo.cpp
	mkdir /usr/src/svxlink-19.09.1/src/build && cd /usr/src/svxlink-19.09.1/src/build
	
	#wget https://github.com/sm0svx/svxlink/archive/17.12.tar.gz
	#tar -xzf 17.12.tar.gz -C /usr/src/
	#rm 17.12.tar.gz
	#wget -O - ftp://ftp.f5nlg.ovh/DEV/SERVEUR_17.12/ReflectorClient.cpp > /usr/src/svxlink-17.12/src/svxlink/reflector/ReflectorClient.cpp
	#wget -O - ftp://ftp.f5nlg.ovh/DEV/SERVEUR_17.12/ModuleMetarInfo.cpp > /usr/src/svxlink-17.12/src/svxlink/modules/metarinfo/ModuleMetarInfo.cpp
	#mkdir /usr/src/svxlink-17.12/src/build && cd /usr/src/svxlink-17.12/src/build
	
	# Source sur la branch master
	#mkdir -p /usr/src/svxlink-master
	#git clone https://github.com/sm0svx/svxlink.git /usr/src/svxlink-master
	#wget -O - ftp://ftp.f5nlg.ovh/DEV/SERVEUR_17.12/ReflectorClient.cpp > /usr/src/svxlink-master/src/svxlink/reflector/ReflectorClient.cpp
	#mkdir /usr/src/svxlink-master/src/build && cd /usr/src/svxlink-master/src/build
	
	
	
	useradd -r -g daemon svxlink
	#usermod -a -G daemon svxlink
	groupadd svxlink
	gpasswd -a svxlink svxlink
	gpasswd -a svxlink gpio
	gpasswd -a svxlink audio

	#cmake -DCMAKE_INSTALL_PREFIX=/usr -DSYSCONF_INSTALL_DIR=/etc -DLOCAL_STATE_DIR=/var -DUSE_OSS=NO -DUSE_QT=NO  ..	
	#make
	
	cmake -DCMAKE_INSTALL_PREFIX=/usr -DSYSCONF_INSTALL_DIR=/etc -DLOCAL_STATE_DIR=/var -DUSE_OSS=NO -DUSE_QT=NO -RELEASE_CFLAGS=-g -O2 -mfloat-abi=softfp -mfpu=vfp -mcpu=native ..
	make -j4
	
	if [ $? -ne 0 ]; then
      echo -e "${ROUGE}Ne peut pas compiler Svxlink - Annulation${NORMAL}"
      exit 1
    fi
	
	#make doc
	make install
	make clean

	rm -rf /usr/src/svxlink-17.12/src/build

	ldconfig
		
	rm -f svxlink-sounds-en_US-heather-16k-19.09.99.tar.gz
	wget https://github.com/sm0svx/svxlink-sounds-en_US-heather/releases/download/19.09.99/svxlink-sounds-en_US-heather-16k-19.09.99.tar.gz
	tar -xzf svxlink-sounds-en_US-heather-16k-19.09.99.tar.gz -C /usr/share/svxlink/sounds
	rm -f svxlink-sounds-en_US-heather-16k-19.09.99.tar.gz
	mv /usr/share/svxlink/sounds/en_US-heather-16k /usr/share/svxlink/sounds/en_US
	
	
	pip install requests metar
	
	
	echo -e "${VERT}Installation de SvxLink terminée${NORMAL}"
	
}






install_spotnik() {

	echo "---------------------------------------------------------------------"
	echo -e "${JAUNE}Configuration du Spotnik V$SPOTNIK_VERSION ${NORMAL}"

	if pgrep -x spotnik >/dev/null
	then
		pkill -TERM spotnik
	fi

	if pgrep -x svxlink >/dev/null
	then
		pkill -TERM svxlink
		if [ "$HDW" == "Raspberry" ]; then
			echo "18" > /sys/class/gpio/unexport
			echo "17" > /sys/class/gpio/unexport
		elif [ "$HDW" == "Orange Pi" ]; then
			echo "10" > /sys/class/gpio/unexport
			echo "7" > /sys/class/gpio/unexport
		fi
		sleep 2
	fi
	
	cd $WD	
	
	wget https://raw.githubusercontent.com/spotnik-ham/usr_bin/master/spot
	wget https://raw.githubusercontent.com/spotnik-ham/usr_bin/master/fetchsetup
	mv -f spot /usr/bin/spot
	mv -f fetchsetup /usr/bin/fetchsetup
	
	chmod 744 /usr/bin/spot /usr/bin/fetchsetup
	
	rm -rf /etc/spotnik
	git clone https://github.com/spotnik-ham/etc.git /etc/spotnik
		
	rm -rf /opt/spotnik/gui
	git clone https://github.com/spotnik-ham/gui.git /opt/spotnik/gui

	
	rm -rf /usr/share/svxlink/events.d/local
	git clone https://github.com/spotnik-ham/usr_share_svxlink.git /usr/share/svxlink/events.d/local


	rm -f fr_FR.tar.gz
	wget ftp://ftp.f5nlg.ovh/DEV/fr_FR.tar.gz
	tar -xzf fr_FR.tar.gz -C /usr/share/svxlink/sounds
	rm -f fr_FR.tar.gz

	rm -f Spotnik31.tgz
	wget ftp://rrf.f5nlg.ovh/DEV/Spotnik_v3.1/Spotnik31.tgz
	tar -xzf Spotnik31.tgz
	rm -f Spotnik31.tgz



	if [ "$SPOTNIK_VERSION" == "3.1" ]; then
						
		### /ETC
		rm -f /etc/spotnik/restart.* /etc/spotnik/svxlink.1voie /etc/spotnik/svxlink.2voies /etc/spotnik/svxlink.cfg /etc/spotnik/svxlink.el
		cp -R Spotnik31/etc/. /etc
		chmod 600 /etc/spotnik/fetchmailrc
		chmod 744 /etc/spotnik/restart
		
		### /USR/SHARE/SVXLINK 
		mkdir -p /usr/share/svxlink/sounds/fr_FR/RRF
		mv -f /etc/spotnik/*.wav /usr/share/svxlink/sounds/fr_FR/RRF
		mv -f /usr/share/svxlink/sounds/fr_FR/RRF/name.wav /usr/share/svxlink/sounds/fr_FR/PropagationMonitor
		
		
		mkdir -p /usr/share/svxlink/events.d/local
		cp -R Spotnik31/usr_share_svxlink_events.d_local/Logic.tcl /usr/share/svxlink/events.d/local
		#cp -R Spotnik31/usr_share_svxlink_events.d_local/* /usr/share/svxlink/events.d/local
	
		### /USR/BIN
		cp -R Spotnik31/usr_bin/. /usr/bin
		chmod 744 /usr/bin/spot /usr/bin/fetchsetup
	
		### /OPT/SPOTNIK/GUI
		cp -R Spotnik31/opt_spotnik_gui/. /opt/spotnik/gui
	
		echo $SPOTNIK_VERSION > /etc/spotnik/version
	
		#rm -f Spotnik31.tgz
		
	fi


	# Ramdisk
	#cp /etc/fstab /etc/fstab.save
	#echo "tmpfs /tmp tmpfs defaults,nosuid 0 0" >> /etc/fstab
	#echo "tmpfs /var/spool/svxlink tmpfs defaults,nosuid 0 0" >> /etc/fstab

	#swapoff -a

	### /ETC
	# hostname spotnikV$SPOTNIK_VERSION
	echo "spotnikV$SPOTNIK_VERSION" > /etc/hostname
	sed -i "s/raspberrypi/spotnikV$SPOTNIK_VERSION/g" /etc/hosts

	# Si RPI 3B+
	#if [ "$HDW" == "Raspberry" ] && [ "$rev" == "a020d3" ]; then
				
	echo "default" > /etc/spotnik/network
	
	mv /etc/rc.local /etc/rc.local.save

	# RPI
	if [ "$HDW" == "Raspberry" ]; then	

		if [ ! -f "/etc/wpa_supplicant/wpa_supplicant.conf" ]; then
			mkdir -p /etc/wpa_supplicant
			cp Spotnik31/wpa_supplicant.conf /etc/wpa_supplicant
		fi

		mv Spotnik31/etc/rc.local.rpi /etc/rc.local

		sed -i 's/GPIO_SQL_PIN=gpio10/GPIO_SQL_PIN=gpio18/g' $SVXLINK_CONF_FILE > /dev/null 2>&1
		sed -i 's/PTT_PIN=gpio7/PTT_PIN=gpio17/g' $SVXLINK_CONF_FILE > /dev/null 2>&1
		
		# Sound card
			#echo "blacklist snd_bcm2835" > /etc/modprobe.d/blacklist-snd_bcm2835.conf
			echo -e "options snd_usb_audio index=0\noptions snd_bcm2835 index=1\noptions snd slots=snd_usb_audio,snd-bcm2835" > /lib/modprobe.d/snd-card.conf
		# Rx1 & Tx1
		#sed -i "/^\[Rx1\]/,/^\[/ s/AUDIO_DEV=alsa:plughw:0/AUDIO_DEV=alsa:plughw:1/g" $SVXLINK_CONF_FILE > /dev/null 2>&1
		#sed -i "/^\[Tx1\]/,/^\[/ s/AUDIO_DEV=alsa:plughw:0/AUDIO_DEV=alsa:plughw:1/g" $SVXLINK_CONF_FILE > /dev/null 2>&1

	
	# OPI
	else
		
		mv Spotnik31/etc/rc.local.opi /etc/rc.local
		
		apt_install network-manager;
	
	fi

	rm -f /etc/rc.local.opi /etc/rc.local.rpi

	chmod 0755 /etc/rc.local

	rm -rf Spotnik31

	cd /opt/spotnik/gui

	#make stop
	make

	if [ $? -ne 0 ]; then
      echo -e "${ROUGE}Ne peut installer Spotnik GUI - Annulation${NORMAL}"
      exit 1
    fi

	ldconfig
	
	# Configure les fichiers SVXLINK_CONF_FILE & /etc/spotnik/config.json
	_config
	
	
	# CRON
	echo -e "## Alerte Propagation\n#*/5 * * * * root /usr/bin/fetchmail -f /etc/spotnik/fetchmailrc &> /dev/null" > /etc/cron.d/spotnik-fetchmail
	echo -e "## Meteo\n30 9,13,19,22 * * *  root /etc/spotnik/meteo.sh" > /etc/cron.d/spotnik-meteo
	echo -e "## Exemple QSO départemental sur le salon à 18h les vendredi\n#0 18 * * fri root /etc/spotnik/restart loc" > /etc/cron.d/spotnik-qsolocal
	/etc/init.d/cron restart


	# Clean
	swapoff -a 
	rm /var/swapfile
	apt-get -y remove dphys-swapfile
	apt-get -y remove x11-common
	apt-get -y autoremove
	apt autoclean
	apt clean
	apt clean cache

	# Locales
	sed -i "s/# fr_FR.UTF-8/fr_FR.UTF-8/g" /etc/locale.gen
	locale-gen && export LANG=fr_FR.UTF-8
	echo "Europe/Paris" | sudo tee /etc/timezone
	dpkg-reconfigure --frontend noninteractive tzdata

	ip=`hostname -I`
	
	echo -e "${VERT}Configuration du Spotnik terminée${NORMAL}"
	echo -e "${VERT}Interface web => https://$ip${NORMAL}"
		
	if (whiptail --title "Reboot necessaire" --yesno "Le Spotnik doit redemarrer.\nVoulez vous redemarrer maintenant ?\n\nInterface Web => https://$ip" 10 60) then
		reboot
	fi

}



_config() {


	_qrz=`sed -nE 's:^.*\"callsign\"\: \"(.*)\".*$:\1:p' /etc/spotnik/config.json`
	while true
	do

		qrz=$(whiptail --title "Configuration Spotnik" --inputbox "Saisissez votre indicatif" 16 35 $_qrz 3>&1 1>&2 2>&3)
		if [ $? != 0 ]; then
			qrz=$_qrz
			break;
		elif [ $qrz != "" ]; then
			sed -i "s/\"callsign\"\: \"$_qrz\"/\"callsign\"\: \"$qrz\"/g" /etc/spotnik/config.json > /dev/null 2>&1
			
			sed -i "/^\[SimplexLogic\]/,/^\[/ s/^CALLSIGN=\(.*\)/CALLSIGN=$qrz/g" $SVXLINK_CONF_FILE > /dev/null 2>&1
			sed -i "/^\[LocationInfo\]/,/^\[/ s/^CALLSIGN=EL-\(.*\)/CALLSIGN=EL-$qrz/g" $SVXLINK_CONF_FILE > /dev/null 2>&1

			break;
		fi

	done

	
	_dpt=`sed -nE 's:^.*\"Departement\"\: \"([[:alnum:]]{0,3})\".*$:\1:p' /etc/spotnik/config.json`	
	while true
	do

		dpt=$(whiptail --title "Configuration Spotnik" --inputbox "Saisissez votre departement" 16 35 $_dpt 3>&1 1>&2 2>&3)
		if [ $? != 0 ]; then
			dpt=$_dpt
			break;
		elif [ $dpt != "" ]; then
			sed -i "s/\"Departement\"\: \"$_dpt\"/\"Departement\"\: \"$dpt\"/g" /etc/spotnik/config.json > /dev/null 2>&1
			break;
		fi
	
	done
	
	
	
	_band=`sed -nE 's:^.*\"band_type\"\: \"(V|U|R|T|H|10M|6M|V3)\".*$:\1:p' /etc/spotnik/config.json`
	while true
	do
				
		band=$(whiptail --title "Configuration materiel" --radiolist "Bande d'emission" 17 50 6 \
								"10M" "29 MHZ" OFF  \
								"6M" "50 MHZ" OFF \
								"V" "144 - 146 MHZ " OFF \
								"U" "430 - 440 MHZ " ON \
								"R" "Relais" OFF \
								"H" "HotSpot " OFF \
								"T" "Transpondeur" OFF 3>&1 1>&2 2>&3)
		
		if [ $? != 0 ]; then
			band=$_band
			break;
		else
			sed -i "s/\"band_type\"\: \"$_band\"/\"band_type\"\: \"$band\"/g" /etc/spotnik/config.json > /dev/null 2>&1
			break;
		fi
	
	done
	
	
	_sql=`sed -nE 's:^.*\"sql_det\"\: \"(CTCSS|GPIO)\".*$:\1:p' /etc/spotnik/config.json`
	while true
	do
		sql=$(whiptail --title "Configuration materiel" --radiolist "Detection du squelch" 15 52 4 \
				"CTCSS" "Detection du CTCSS par SvxLink" ON \
				"GPIO" "Detection du CTCSS par votre RX " OFF 3>&1 1>&2 2>&3)

	if [ $? != 0 ]; then
			sql=$_sql
			break;
		elif [ $sql != "" ]; then
			sed -i "s/\"sql_det\"\: \"$_sql\"/\"sql_det\"\: \"$sql\"/g" /etc/spotnik/config.json > /dev/null 2>&1
			
			sed -i "/^\[Rx1\]/,/^\[/ s/^SQL_DET=\(GPIO\|CTCSS\)/SQL_DET=$sql/g" $SVXLINK_CONF_FILE > /dev/null 2>&1

			
			#tone=$(whiptail --title "Configuration materiel" --radiolist "Tonalité du CTCSS" 15 52 4 \
			#	"71.9" "71.9" ON \
			#	"88" "88" OFF 3>&1 1>&2 2>&3)
			
			break;
		fi

	done
		
	
	sed -i "s/^CALLSIGN=([[:alnum:]]\{1,3\}) \(.*\) \(B\|V\|U\|R\|T\|H\|10M\|6M\|V3\)/CALLSIGN=\($dpt\) $qrz $band/g" $SVXLINK_CONF_FILE > /dev/null 2>&1



}




install_SPOTNIK2HMI() {

	echo "---------------------------------------------------------------------"
	echo -e "${JAUNE}Installation SPOTNIK2HMI${NORMAL}"
	
	echo "INSTALLATION DEPENDANCE PYTHON POUR SPOTNIK2HMI"

	# Nextion
	apt_install python-serial python3-serial python3-pip 
	pip3 install pyalsaaudio speedtest-cli
	pip3 install requests
	
	
	echo "INSTALLATION scripts python"
	git clone https://github.com/F8ASB/spotnik2hmi_V2.git $pathinstall

	chmod +x $pathinstall/spotnik2hmi.py

	echo "INSTALLATION UTILITAIRE METAR"
	git clone https://github.com/python-metar/python-metar.git $pathinstall/python-metar/
	
	
	# Nextion RPI
	if [ "$HDW" == "Raspberry" ]; then

		# Desactive le Bluetooth
		option=dtoverlay
		value=pi3-disable-bt
		sed -i \
			-e '/^#\?\(\s*'${option//\//\\/}'\s*=\s*\).*/{s//\1'${value//\//\\/}'/;:a;n;ba;q}' \
			-e '$a'${option//\//\\/}'='${value//\//\\/} /boot/config.txt
	
		#PORT Nextion sur RPI
		PORT=$(whiptail --title "Choix du Port de communication" --radiolist \
				"Sur quoi raccorder vous le Nextion?" 15 60 4 \
				"ttyAMA0" "Sur Raspberry Pi " ON \
				"ttyUSB0" "Orange Pi ou Raspberry Pi " OFF 3>&1 1>&2 2>&3)


	# Nextion OPI
	elif [ "$HDW" == "Orange Pi" ]; then
		apt_install libpython3-dev libasound2-dev
	
		#PORT Nextion sur OPI
		PORT=$(whiptail --title "Choix du Port de communication" --radiolist \
				"Sur quoi raccorder vous le Nextion?" 15 60 4 \
				"ttyS0" "Sur Orange Pi " ON \
				"ttyUSB0" "Orange Pi ou Raspberry Pi " OFF 3>&1 1>&2 2>&3)
	fi
	
	
	
	# Desactiver Port série
	sed -i "s/console=serial0,115200//g" /boot/cmdline.txt > /dev/null 2>&1
	option=enable_uart
	value=1
		sed -i \
			-e '/^#\?\(\s*'${option//\//\\/}'\s*=\s*\).*/{s//\1'${value//\//\\/}'/;:a;n;ba;q}' \
			-e '$a'${option//\//\\/}'='${value//\//\\/} /boot/config.txt
	
	
	

	grep -q "^python3 $pathinstall/spotnik2hmi.py $PORT 9600" /etc/rc.local

	if [ $? -ne 0 ]; then
		sed -i '/make start/a \sleep 10\npython3 '$pathinstall'/spotnik2hmi.py '$PORT' 9600' /etc/rc.local
	fi
		
	echo ""
	echo " ENJOY ;) TEAM:F0DEI,F5SWB,F8ASB"
	echo ""
	
	
	
	echo -e "${VERT}Installation SPOTNIK2HMI terminée${NORMAL}"
	
	if (whiptail --title "Reboot necessaire" --yesno "Voulez vous redemarrer maintenant ?" 10 60) then
		reboot
	fi
}


install_NEXTION() {

	echo "---------------------------------------------------------------------"
	echo -e "${JAUNE}Installation NEXTION${NORMAL}"
	
	#PORT='ttyUSB0'
	if [ "$HDW" == "Raspberry" ]; then
	
		PORT=$(whiptail --title "Choix du Port de communication" --radiolist \
			"Sur quoi raccorder vous le Nextion?" 15 60 4 \
			"ttyAMA0" "Sur Raspberry Pi " ON \
			"ttyUSB0" "Orange Pi ou Raspberry Pi " OFF 3>&1 1>&2 2>&3)
	
	elif [ "$HDW" == "Orange Pi" ]; then
		
		PORT=$(whiptail --title "Choix du Port de communication" --radiolist \
			"Sur quoi raccorder vous le Nextion?" 15 60 4 \
			"ttyS0" "Sur Orange Pi " ON \
			"ttyUSB0" "Orange Pi ou Raspberry Pi " OFF 3>&1 1>&2 2>&3)
		
	fi


	ECRAN=$(whiptail --title "Choix type d'ecran NEXTION" --radiolist \
	"Quel Type d'ecran ?" 15 60 4 \
	"NX4832K035.tft" "Ecran 3,5 Enhanced" OFF \
	"NX4832T035.tft" "Ecran 3,5 Basic" ON 3>&1 1>&2 2>&3)

	exitstatus=$?
	if [ $exitstatus = 0 ]; then
		echo "Type d'écran :" $ECRAN
		python $pathinstall'/nextion/nextion.py' $pathinstall'/nextion/'$ECRAN '/dev/'$PORT

		echo ""
		echo " ENJOY ;) TEAM:F0DEI,F5SWB,F8ASB"
		echo ""
		
	else
		echo "Vous avez annule"
	fi
	
	echo -e "${VERT}Installation NEXTION terminée${NORMAL}"

}





install_hamnet() {

	echo "---------------------------------------------------------------------"
	echo -e "${JAUNE}Installation HamNet${NORMAL}"


	# https://f5nlg.wordpress.com/2018/03/09/routeur-hamnet-sur-orangepi-0/
	
	# HAMNET
	apt_install pptp-linux
	
	IP_ROUTEUR=""
	IP_GATEWAY=""
	USER=""
	PWD=""
	SERVEUR_PPTP=""
		 
	cd /etc/ppp/peers
	
	wget ftp://rrf.f5nlg.ovh/HAMNET/hamnet
	
	cd /etc/ppp/ip-up.d
	
	wget ftp://rrf.f5nlg.ovh/HAMNET/ip-up.d/hamnet
	chmod +x hamnet
		
	#pon hamnet
	
	#cd $WD
	
	#wget ftp://rrf.f5nlg.ovh/HAMNET/Hamnet.sh
	
	#chmod +x Hamnet.sh
	
	
	#/etc/dhcp/dhcpd.conf
	
	echo -e "${VERT}Installation HamNet terminée${NORMAL}"
	
}


install_Dwservice() {

	cd $WD
	
	wget https://www.dwservice.net/download/dwagent_generic.sh

	chmod +x dwagent_generic.sh

	./dwagent_generic.sh -silent logpath=/var/log/dwservice.log

	rm dwagent_generic.sh

}




install_all() {
	update_upgrade
	#install_mainpackage
	install_nodejs
	install_svxlink
	install_spotnik
	install_hamnet
	install_SPOTNIK2HMI
	#install_NEXTION
	install_Dwservice
}



while : ; do

choix=$(whiptail --title "Installation Spotnik V$SPOTNIK_VERSION sur $HDW"  --menu " Votre choix: " 20 60 12 \
1 " Installation complète" \
2 " Installation NodeJS" \
3 " Installation SvxLink" \
4 " Configuration du Spotnik" \
5 " SPOTNIK2HMI Gestion Nextion avec Spotnik " \
6 " NEXTION Programmation ecran Nextion " \
7 " Installation DwService" \
8 " Reboot"  3>&1 1>&2 2>&3)

exitstatus=$?

if [ $exitstatus = 0 ]; then
    echo "Your chosen option:" $choix
else
    break;
fi

cd $WD

case $choix in


1)
update_upgrade
install_all;;

2)
install_nodejs ;;


3)
update_upgrade
install_svxlink
if (whiptail --title "Reboot necessaire" --yesno "Voulez vous redemarrer maintenant ?" 10 60) then
	reboot
fi
;;

4)
install_spotnik ;;

5)
update_upgrade
install_SPOTNIK2HMI ;;

6)
install_NEXTION ;;

7)
install_Dwservice ;;

8)
reboot

esac

done
exit 0