712 lines
36 KiB
C
712 lines
36 KiB
C
|
/* -*- mode: c; tab-width: 4; indent-tabs-mode: t; c-basic-offset: 4; coding: utf-8 -*- */
|
||
|
|
/************************************************************************************
|
||
|
|
** **
|
||
|
|
** UHSDR **
|
||
|
|
** a powerful firmware for STM32 based SDR transceivers **
|
||
|
|
** **
|
||
|
|
**---------------------------------------------------------------------------------**
|
||
|
|
** **
|
||
|
|
** File name: **
|
||
|
|
** Description: **
|
||
|
|
** Last Modified: **
|
||
|
|
** Licence: GNU GPLv3 **
|
||
|
|
************************************************************************************/
|
||
|
|
|
||
|
|
#ifndef DRIVERS_UI_UI_CONFIGURATION_H_
|
||
|
|
#define DRIVERS_UI_UI_CONFIGURATION_H_
|
||
|
|
#include "uhsdr_board.h"
|
||
|
|
|
||
|
|
enum
|
||
|
|
{
|
||
|
|
ConfigEntry_Stop = 0,
|
||
|
|
ConfigEntry_UInt8,
|
||
|
|
ConfigEntry_UInt16,
|
||
|
|
ConfigEntry_UInt32_16,
|
||
|
|
ConfigEntry_Int32_16,
|
||
|
|
ConfigEntry_Int16,
|
||
|
|
ConfigEntry_Int32, //this type saves and reads two subsequent 16bit words
|
||
|
|
ConfigEntry_UInt8x2, // this type saves and reads two indepent 8 bit values stored in a 16bit structure. This is relevant for defaults, which are independent
|
||
|
|
// ConfigEntry_Bool,
|
||
|
|
Calib_Val = 0x10000000, // if this is "or"ed with a normal ConfigEntry_... value, it indicates this parameter is a hardware calibration parameter.
|
||
|
|
ConfigEntry_TypeMask = 0x0000ffff, // we support 2^16 different types, this is plenty.
|
||
|
|
};
|
||
|
|
|
||
|
|
typedef struct
|
||
|
|
{
|
||
|
|
int typeId;
|
||
|
|
uint16_t id;
|
||
|
|
volatile void* val_ptr;
|
||
|
|
int32_t val_default;
|
||
|
|
int32_t val_min;
|
||
|
|
int32_t val_max;
|
||
|
|
// uint16_t item_count; // 0 or 1 indicates single value; higher values indicate arrays
|
||
|
|
// uint16_t item_data_spacing; // only used for 32bit values; indicates the distance of the higher 16 bits from the lower 16bits
|
||
|
|
} ConfigEntryDescriptor;
|
||
|
|
|
||
|
|
const ConfigEntryDescriptor* UiConfiguration_GetEntry(uint16_t id);
|
||
|
|
|
||
|
|
void UiConfiguration_LoadEepromValues(bool load_freq_mode_defaults, bool load_eeprom_defaults);
|
||
|
|
uint16_t UiConfiguration_SaveEepromValues(void);
|
||
|
|
void UiConfiguration_UpdateMacroCap(void);
|
||
|
|
|
||
|
|
// Configuration Value Definitions Follow
|
||
|
|
//
|
||
|
|
//
|
||
|
|
#define SIDETONE_MAX_GAIN 15 // Maximum sidetone gain
|
||
|
|
#define DEFAULT_SIDETONE_GAIN 5 // Default sidetone gain
|
||
|
|
//
|
||
|
|
#define CW_KEYER_SPEED_MIN 5 // Minimum keyer speed
|
||
|
|
#define CW_KEYER_SPEED_MAX 48 // Maximum keyer speed
|
||
|
|
#define CW_KEYER_SPEED_DEFAULT 20 // Default keyer speed
|
||
|
|
//
|
||
|
|
|
||
|
|
//
|
||
|
|
#define USB_FREQ_THRESHOLD (10000000) // dial frequency at and above which the default is USB, Hz
|
||
|
|
//
|
||
|
|
//
|
||
|
|
#define MIN_RIT_VALUE -60 // Minimum RIT Value -1.2 kHz
|
||
|
|
#define MAX_RIT_VALUE 60 // Maximum RIT Value +1.2 kHz
|
||
|
|
|
||
|
|
#define LINEOUT_GAIN_DEFAULT 0x49 // Default lineout gain setting in dB steps
|
||
|
|
#define LINEOUT_GAIN_MIN 1 // min lineout gain setting in dB steps
|
||
|
|
#define LINEOUT_GAIN_MAX 0x50 // max lineout gain setting in dB steps
|
||
|
|
|
||
|
|
|
||
|
|
#define AUDIO_GAIN_DEFAULT 16 // Default audio gain
|
||
|
|
#define AUDIO_GAIN_MAX 30 // Maximum audio gain setting
|
||
|
|
|
||
|
|
#define DIG_GAIN_MAX 31 // Maximum audio gain setting
|
||
|
|
#define DIG_GAIN_DEFAULT 16 // Default audio gain
|
||
|
|
|
||
|
|
//
|
||
|
|
// The following are used in the max volume setting in the menu system
|
||
|
|
//
|
||
|
|
#define MAX_VOLUME_MIN 8 // Minimum setting for maximum volume
|
||
|
|
#define MAX_VOLUME_MAX AUDIO_GAIN_MAX // Maximum setting for maximum volume
|
||
|
|
#define MAX_VOLUME_DEFAULT AUDIO_GAIN_DEFAULT
|
||
|
|
//
|
||
|
|
#define MAX_VOLUME_RED_THRESH 10 // "MAX VOLUME" setting at or below which number will be RED to warn user
|
||
|
|
#define MAX_VOLUME_YELLOW_THRESH 16 // "MAX VOLUME" setting at or below which number will be YELLOW to warn user
|
||
|
|
|
||
|
|
#define MAGNIFY_MIN 0
|
||
|
|
#define MAGNIFY_MAX 5
|
||
|
|
#define MAGNIFY_DEFAULT 0
|
||
|
|
#define MAGNIFY_NUM (MAGNIFY_MAX+1)
|
||
|
|
|
||
|
|
//
|
||
|
|
#define PA_BIAS_MAX 115 // Maximum PA Bias Setting
|
||
|
|
#define PA_BIAS_DEFAULT 0 // Default PA Bias setting
|
||
|
|
#define PA_BIAS_LOW_LIMIT 20 // Minimum bias setting. (Below this, number is red)
|
||
|
|
//
|
||
|
|
#define BIAS_OFFSET 25 // Offset value to be added to bias setting
|
||
|
|
// DA value = (OFFSET + (2*setting)) where DA value is 0-255
|
||
|
|
//
|
||
|
|
|
||
|
|
#define XVERTER_MULT_MAX 10 // maximum LO multipler in xverter mode
|
||
|
|
//#define XVERTER_OFFSET_MAX 999000000 // Maximum transverter offset (999 MHz)
|
||
|
|
#define XVERTER_OFFSET_MAX_HZ 499999999 // Maximum transverter offset, setting in Hz. More - in kHz
|
||
|
|
#define XVERTER_OFFSET_MAX 1999999999 // Maximum transverter offset
|
||
|
|
//
|
||
|
|
#define AUTO_LSB_USB_OFF 0
|
||
|
|
#define AUTO_LSB_USB_ON 1
|
||
|
|
#define AUTO_LSB_USB_60M 2
|
||
|
|
#define AUTO_LSB_USB_MAX 2
|
||
|
|
#define AUTO_LSB_USB_DEFAULT AUTO_LSB_USB_60M
|
||
|
|
|
||
|
|
// used to limit the voltmeter calibration parameters
|
||
|
|
//
|
||
|
|
#define POWER_VOLTMETER_CALIBRATE_DEFAULT 100
|
||
|
|
#define POWER_VOLTMETER_CALIBRATE_MIN 00
|
||
|
|
#define POWER_VOLTMETER_CALIBRATE_MAX 200
|
||
|
|
|
||
|
|
#define LOW_POWER_CONFIG_DEFAULT (90-LOW_POWER_THRESHOLD_OFFSET)
|
||
|
|
#define LOW_POWER_CONFIG_MIN 0
|
||
|
|
#define LOW_POWER_CONFIG_MAX (LOW_POWER_ENABLE_MASK + LOW_POWER_THRESHOLD_MAX)
|
||
|
|
|
||
|
|
#define SWR_CAL_MIN 75
|
||
|
|
#define SWR_CAL_MAX 150
|
||
|
|
#define SWR_CAL_DEFAULT 100
|
||
|
|
//
|
||
|
|
#define SENSOR_NULL_MIN 75
|
||
|
|
#define SENSOR_NULL_MAX 125
|
||
|
|
#define SENSOR_NULL_DEFAULT 100
|
||
|
|
|
||
|
|
|
||
|
|
#define SPEC_COLOUR_TRACE_DEFAULT SPEC_WHITE
|
||
|
|
#define SPEC_COLOUR_TRACEBW_DEFAULT SPEC_WHITE
|
||
|
|
#define SPEC_COLOUR_BACKGRBW_DEFAULT 20
|
||
|
|
#define SPEC_COLOUR_GRID_DEFAULT SPEC_GREY4
|
||
|
|
#define SPEC_COLOUR_SCALE_DEFAULT SPEC_GREY4
|
||
|
|
#define FILTER_DISP_COLOUR_DEFAULT SPEC_GREY4
|
||
|
|
|
||
|
|
//
|
||
|
|
// *************************************************************************************************************************
|
||
|
|
//
|
||
|
|
// EEPROM Items IDs
|
||
|
|
//
|
||
|
|
// These do NOT use "enum" as it is important that the number *NOT* change
|
||
|
|
// by the insertion of new variables: All NEW variable should be placed at
|
||
|
|
// the END of the list to maintain compatibility with older versions and the settings!
|
||
|
|
// If a firmware no longer uses an ID, do not delete the ID entry, just comment it out!
|
||
|
|
// This allows to track former use of an ID for a particular purpose.
|
||
|
|
// DO NOT REUSE PREVIOUSLY USED IDs without thinking twice. Old entries from former
|
||
|
|
// use may cause unexpected behavior with the new firmware and vice versa
|
||
|
|
// if downgrading from a new one to an old firmware.
|
||
|
|
//
|
||
|
|
//
|
||
|
|
|
||
|
|
#define EEPROM_ZERO_LOC 0
|
||
|
|
#define EEPROM_BAND_MODE 1
|
||
|
|
#define EEPROM_FREQ_HIGH 2
|
||
|
|
#define EEPROM_FREQ_LOW 3
|
||
|
|
#define EEPROM_FREQ_STEP 4
|
||
|
|
#define EEPROM_TX_AUDIO_SRC 5
|
||
|
|
#define EEPROM_TCXO_STATE 6
|
||
|
|
#define EEPROM_PA_BIAS 7
|
||
|
|
#define EEPROM_AUDIO_GAIN 8
|
||
|
|
#define EEPROM_RX_CODEC_GAIN 9
|
||
|
|
#define EEPROM_MAX_VOLUME 10
|
||
|
|
#define EEPROM_POWER_STATE 11
|
||
|
|
#define EEPROM_TX_POWER_LEVEL 12
|
||
|
|
#define EEPROM_CW_KEYER_SPEED 13
|
||
|
|
#define EEPROM_CW_KEYER_MODE 14
|
||
|
|
#define EEPROM_CW_SIDETONE_GAIN 15
|
||
|
|
#define EEPROM_MIC_BOOST 16
|
||
|
|
#define EEPROM_TX_IQ_80M_GAIN_BALANCE 17 // TX gain balance
|
||
|
|
#define EEPROM_TX_IQ_80M_PHASE_BALANCE 18 // TX phase balance
|
||
|
|
#define EEPROM_RX_IQ_80M_GAIN_BALANCE 19
|
||
|
|
#define EEPROM_RX_IQ_80M_PHASE_BALANCE 20
|
||
|
|
|
||
|
|
#if 0 /* config value locations below are no longer in use since 2.5.18 */
|
||
|
|
#define EEPROM_BAND0_MODE 21 // Band/mode/filter memory per-band - bands indexed from here
|
||
|
|
#define EEPROM_BAND1_MODE 22
|
||
|
|
#define EEPROM_BAND2_MODE 23
|
||
|
|
#define EEPROM_BAND3_MODE 24
|
||
|
|
#define EEPROM_BAND4_MODE 25
|
||
|
|
#define EEPROM_BAND5_MODE 26
|
||
|
|
#define EEPROM_BAND6_MODE 27
|
||
|
|
#define EEPROM_BAND7_MODE 28
|
||
|
|
#define EEPROM_BAND8_MODE 29
|
||
|
|
#define EEPROM_BAND9_MODE 30
|
||
|
|
#define EEPROM_BAND10_MODE 31
|
||
|
|
#define EEPROM_BAND11_MODE 32
|
||
|
|
#define EEPROM_BAND12_MODE 33
|
||
|
|
#define EEPROM_BAND13_MODE 34
|
||
|
|
#define EEPROM_BAND14_MODE 35
|
||
|
|
#define EEPROM_BAND15_MODE 36
|
||
|
|
#define EEPROM_BAND16_MODE 37
|
||
|
|
#define EEPROM_BAND17_MODE 38 // "Floating" General coverage band
|
||
|
|
//
|
||
|
|
//
|
||
|
|
#define EEPROM_BAND0_FREQ_HIGH 39 // Per-band frequency, high word - bands indexed from here
|
||
|
|
#define EEPROM_BAND1_FREQ_HIGH 40
|
||
|
|
#define EEPROM_BAND2_FREQ_HIGH 41
|
||
|
|
#define EEPROM_BAND3_FREQ_HIGH 42
|
||
|
|
#define EEPROM_BAND4_FREQ_HIGH 43
|
||
|
|
#define EEPROM_BAND5_FREQ_HIGH 44
|
||
|
|
#define EEPROM_BAND6_FREQ_HIGH 45
|
||
|
|
#define EEPROM_BAND7_FREQ_HIGH 46
|
||
|
|
#define EEPROM_BAND8_FREQ_HIGH 47
|
||
|
|
#define EEPROM_BAND9_FREQ_HIGH 48
|
||
|
|
#define EEPROM_BAND10_FREQ_HIGH 49
|
||
|
|
#define EEPROM_BAND11_FREQ_HIGH 50
|
||
|
|
#define EEPROM_BAND12_FREQ_HIGH 51
|
||
|
|
#define EEPROM_BAND13_FREQ_HIGH 52
|
||
|
|
#define EEPROM_BAND14_FREQ_HIGH 53
|
||
|
|
#define EEPROM_BAND15_FREQ_HIGH 54
|
||
|
|
#define EEPROM_BAND16_FREQ_HIGH 55
|
||
|
|
#define EEPROM_BAND17_FREQ_HIGH 56 // "Floating" General coverage band
|
||
|
|
//
|
||
|
|
//
|
||
|
|
#define EEPROM_BAND0_FREQ_LOW 57 // Per-band frequency, high word - bands indexed from here
|
||
|
|
#define EEPROM_BAND1_FREQ_LOW 58
|
||
|
|
#define EEPROM_BAND2_FREQ_LOW 59
|
||
|
|
#define EEPROM_BAND3_FREQ_LOW 60
|
||
|
|
#define EEPROM_BAND4_FREQ_LOW 61
|
||
|
|
#define EEPROM_BAND5_FREQ_LOW 62
|
||
|
|
#define EEPROM_BAND6_FREQ_LOW 63
|
||
|
|
#define EEPROM_BAND7_FREQ_LOW 64
|
||
|
|
#define EEPROM_BAND8_FREQ_LOW 65
|
||
|
|
#define EEPROM_BAND9_FREQ_LOW 66
|
||
|
|
#define EEPROM_BAND10_FREQ_LOW 67
|
||
|
|
#define EEPROM_BAND11_FREQ_LOW 68
|
||
|
|
#define EEPROM_BAND12_FREQ_LOW 69
|
||
|
|
#define EEPROM_BAND13_FREQ_LOW 70
|
||
|
|
#define EEPROM_BAND14_FREQ_LOW 71
|
||
|
|
#define EEPROM_BAND15_FREQ_LOW 72
|
||
|
|
#define EEPROM_BAND16_FREQ_LOW 73
|
||
|
|
#define EEPROM_BAND17_FREQ_LOW 74 // "Floating" General coverage band
|
||
|
|
|
||
|
|
#endif
|
||
|
|
//
|
||
|
|
//
|
||
|
|
#define EEPROM_FREQ_CAL 75 // Frequency calibration
|
||
|
|
#define EEPROM_NB_SETTING 76 // Noise Blanker Setting
|
||
|
|
//#define EEPROM_AGC_MODE 77 // AGC setting
|
||
|
|
#define EEPROM_MIC_GAIN 78 // Mic gain setting
|
||
|
|
#define EEPROM_LINE_GAIN 79 // Line gain setting
|
||
|
|
#define EEPROM_SIDETONE_FREQ 80 // Sidetone frequency (Hz)
|
||
|
|
#define EEPROM_SPEC_SCOPE_SPEED 81 // Spectrum Scope Speed
|
||
|
|
#define EEPROM_SPECTRUM_FILTER 82 // Spectrum Scope filter strength
|
||
|
|
//#define EEPROM_RX_GAIN 83 // RX Gain setting (e.g. minimum RF gain as might be used for manual AGC)
|
||
|
|
//#define EEPROM_AGC_CUSTOM_DECAY 84 // Custom setting for AGC decay rate
|
||
|
|
#define EEPROM_SPECTRUM_TRACE_COLOUR 85 // Custom setting for spectrum scope trace colour
|
||
|
|
#define EEPROM_SPECTRUM_GRID_COLOUR 86 // Custom setting for spectrum scope grid colour
|
||
|
|
#define EEPROM_SPECTRUM_SCALE_COLOUR 87 // Custom setting for spectrum scope frequency scale colour
|
||
|
|
#define EEPROM_PADDLE_REVERSE 88 // TRUE if paddle is to be reversed
|
||
|
|
#define EEPROM_CW_RX_DELAY 89 // Delay after last CW element before returning to receive
|
||
|
|
#define EEPROM_SPECTRUM_CENTRE_LINE_COLOUR 90 // Custom setting for spectrum scope grid center marker colour
|
||
|
|
//
|
||
|
|
#define EEPROM_DETECTOR_COUPLING_COEFF_2200M 91 // Calibration coupling coefficient for FWD/REV power sensor for 80 meters
|
||
|
|
#define EEPROM_DETECTOR_COUPLING_COEFF_630M 92 // Calibration coupling coefficient for FWD/REV power sensor for 80 meters
|
||
|
|
#define EEPROM_DETECTOR_COUPLING_COEFF_80M 93 // Calibration coupling coefficient for FWD/REV power sensor for 80 meters
|
||
|
|
#define EEPROM_DETECTOR_COUPLING_COEFF_40M 94 // Calibration coupling coefficient for FWD/REV power sensor for 60/40 meters
|
||
|
|
#define EEPROM_DETECTOR_COUPLING_COEFF_20M 95 // Calibration coupling coefficient for FWD/REV power sensor for 30/20/17 meters
|
||
|
|
#define EEPROM_DETECTOR_COUPLING_COEFF_15M 96 // Calibration coupling coefficient for FWD/REV power sensor for 15/12 meters
|
||
|
|
//
|
||
|
|
// The following are the coefficients used to set the RF output power settings
|
||
|
|
//
|
||
|
|
#define EEPROM_BAND0_5W 97 // 5 watt power setting, 80m
|
||
|
|
#define EEPROM_BAND1_5W 98 // 5 watt power setting, 60m
|
||
|
|
#define EEPROM_BAND2_5W 99 // 5 watt power setting, 40m
|
||
|
|
#define EEPROM_BAND3_5W 100 // 5 watt power setting, 30m
|
||
|
|
#define EEPROM_BAND4_5W 101 // 5 watt power setting, 20m
|
||
|
|
#define EEPROM_BAND5_5W 102 // 5 watt power setting, 17m
|
||
|
|
#define EEPROM_BAND6_5W 103 // 5 watt power setting, 15m
|
||
|
|
#define EEPROM_BAND7_5W 104 // 5 watt power setting, 12m
|
||
|
|
#define EEPROM_BAND8_5W 105 // 5 watt power setting, 10m
|
||
|
|
#define EEPROM_BAND9_5W 106 // 5 watt power setting, 6m
|
||
|
|
#define EEPROM_BAND10_5W 107 // 5 watt power setting, 4m
|
||
|
|
#define EEPROM_BAND11_5W 108 // 5 watt power setting, 2m
|
||
|
|
#define EEPROM_BAND12_5W 109 // 5 watt power setting, 70cm
|
||
|
|
#define EEPROM_BAND13_5W 110 // 5 watt power setting, 23cm
|
||
|
|
#define EEPROM_BAND14_5W 111 // 5 watt power setting, 2200m
|
||
|
|
#define EEPROM_BAND15_5W 112 // 5 watt power setting, 630m
|
||
|
|
#define EEPROM_BAND16_5W 113 // 5 watt power setting, 160m
|
||
|
|
#define EEPROM_BAND17_5W 114 // reserved
|
||
|
|
//
|
||
|
|
#define EEPROM_BAND0_FULL 115 // "FULL" power setting, 80m
|
||
|
|
#define EEPROM_BAND1_FULL 116 // "FULL" power setting, 60m
|
||
|
|
#define EEPROM_BAND2_FULL 117 // "FULL" power setting, 40m
|
||
|
|
#define EEPROM_BAND3_FULL 118 // "FULL" power setting, 30m
|
||
|
|
#define EEPROM_BAND4_FULL 119 // "FULL" power setting, 20m
|
||
|
|
#define EEPROM_BAND5_FULL 120 // "FULL" power setting, 17m
|
||
|
|
#define EEPROM_BAND6_FULL 121 // "FULL" power setting, 15m
|
||
|
|
#define EEPROM_BAND7_FULL 122 // "FULL" power setting, 12m
|
||
|
|
#define EEPROM_BAND8_FULL 123 // "FULL" power setting, 10m
|
||
|
|
#define EEPROM_BAND9_FULL 124 // "FULL" power setting, 6m
|
||
|
|
#define EEPROM_BAND10_FULL 125 // "FULL" power setting, 4m
|
||
|
|
#define EEPROM_BAND11_FULL 126 // "FULL" power setting, 2m
|
||
|
|
#define EEPROM_BAND12_FULL 127 // "FULL" power setting, 70cm
|
||
|
|
#define EEPROM_BAND13_FULL 128 // "FULL" power setting, 23cm
|
||
|
|
#define EEPROM_BAND14_FULL 129 // "FULL" power setting, 2200m
|
||
|
|
#define EEPROM_BAND15_FULL 130 // "FULL" power setting, 630m
|
||
|
|
#define EEPROM_BAND16_FULL 131 // "FULL" power setting, 160m
|
||
|
|
#define EEPROM_BAND17_FULL 132 // reserved
|
||
|
|
//
|
||
|
|
#if 0 // No longer being used, superseded by filter path
|
||
|
|
#define EEPROM_FILTER_300HZ_SEL 133 // Selection of 300 Hz filter
|
||
|
|
#define EEPROM_FILTER_500HZ_SEL 134 // Selection of 500 Hz filter
|
||
|
|
#define EEPROM_FILTER_1K8_SEL 135 // Selection of 1.8 kHz filter
|
||
|
|
#define EEPROM_FILTER_2K3_SEL 136 // Selection of 2.3 kHz filter
|
||
|
|
#define EEPROM_FILTER_3K6_SEL 137 // Selection of 3.6 kHz filter
|
||
|
|
#define EEPROM_FILTER_WIDE_SEL 138 // Selection of "Wide" filter (>3.6kHz)
|
||
|
|
//
|
||
|
|
#endif
|
||
|
|
#define EEPROM_TX_IQ_10M_GAIN_BALANCE 139 // TX gain balance
|
||
|
|
#define EEPROM_TX_IQ_10M_PHASE_BALANCE 140 // TX phase balance
|
||
|
|
#define EEPROM_RX_IQ_10M_GAIN_BALANCE 141
|
||
|
|
#define EEPROM_RX_IQ_10M_PHASE_BALANCE 142
|
||
|
|
#define EEPROM_SENSOR_NULL 143 // Power meter sensor null calibrate
|
||
|
|
//#define EEPROM_REV_PWR_CAL 144 // REV power meter calibrate
|
||
|
|
//
|
||
|
|
#define EEPROM_XVERTER_DISP 145 // TRUE if display is offset with transverter frequency offset
|
||
|
|
#define EEPROM_XVERTER_OFFSET_HIGH 146 // Frequency by which the display is offset for transverter use, high byte
|
||
|
|
//
|
||
|
|
#define EEPROM_VFO_MEM_MODE 147 // settings of VFO/SPLIT/Memory configuration bits - see variable "vfo_mem_mode" for information.
|
||
|
|
//
|
||
|
|
#define EEPROM_XVERTER_OFFSET_LOW 148 // Low byte of above
|
||
|
|
//
|
||
|
|
#define EEPROM_SPECTRUM_MAGNIFY 149 // TRUE if spectrum scope is to be magnified
|
||
|
|
//
|
||
|
|
//#define EEPROM_WIDE_FILT_CW_DISABLE 150 // TRUE if wide filters are to be disabled in CW mode
|
||
|
|
//#define EEPROM_NARROW_FILT_SSB_DISABLE 151 // TRUE if narrow filters are to be disabled in SSB mode
|
||
|
|
//
|
||
|
|
#define EEPROM_AM_MODE_DISABLE 152 // TRUE if AM mode is to be disabled
|
||
|
|
//
|
||
|
|
#define EEPROM_PA_CW_BIAS 153 // If non-zero, this is the PA bias setting when in CW mode
|
||
|
|
//
|
||
|
|
#define EEPROM_SPECTRUM_DB_DIV 154 // Spectrum Scope dB/Division
|
||
|
|
#define EEPROM_SPECTRUM_AGC_RATE 155 // AGC setting for spectrum scope
|
||
|
|
//
|
||
|
|
#define EEPROM_METER_MODE 156 // Stored setting of meter mode
|
||
|
|
//
|
||
|
|
#define EEPROM_ALC_DECAY_TIME 157 // ALC Decay time
|
||
|
|
#define EEPROM_ALC_POSTFILT_TX_GAIN 158 // ALC post-filter TX audio gain
|
||
|
|
//
|
||
|
|
#define EEPROM_STEP_SIZE_CONFIG 159 // TRUE if there is to be a line under the frequency digit indicating step size
|
||
|
|
//
|
||
|
|
#define EEPROM_DSP_MODE 160 // Stores the DSP operational mode
|
||
|
|
#define EEPROM_DSP_NR_STRENGTH 161 // Stores the DSP Noise Reduction operational strength
|
||
|
|
#ifdef OBSOLETE_NR
|
||
|
|
#define EEPROM_DSP_NR_DECOR_BUFLEN 162 // DSP Noise Reduction De-correlator buffer length
|
||
|
|
#define EEPROM_DSP_NR_FFT_NUMTAPS 163 // DSP Noise Reduction FFT number of taps
|
||
|
|
|
||
|
|
#define EEPROM_DSP_NOTCH_DECOR_BUFLEN 164 // DSP Notch De-correlator buffer length
|
||
|
|
#define EEPROM_DSP_NOTCH_CONV_RATE 165 // DSP Notch convergence rate
|
||
|
|
#endif
|
||
|
|
#ifdef USE_LMS_AUTONOTCH
|
||
|
|
#define EEPROM_DSP_NOTCH_DECOR_BUFLEN 164 // DSP Notch De-correlator buffer length
|
||
|
|
#define EEPROM_DSP_NOTCH_CONV_RATE 165 // DSP Notch convergence rate
|
||
|
|
#endif
|
||
|
|
//
|
||
|
|
//#define EEPROM_MAX_RX_GAIN 166 // Maximum RX gain - adjusts maximum allowed AGC gain in S-units
|
||
|
|
#define EEPROM_TX_AUDIO_COMPRESS 167 // TX audio compressor setting, used to calculate other values
|
||
|
|
//
|
||
|
|
#define EEPROM_TX_IQ_80M_GAIN_BALANCE_TRANS_OFF 168 // IQ Gain balance for AM reception
|
||
|
|
//
|
||
|
|
#define EEPROM_TX_DISABLE 169 // TRUE of transmit is to be disabled
|
||
|
|
#define EEPROM_FLAGS1 170 // Miscellaneous status flag, saved in EEPROM - see variable "flags1"
|
||
|
|
#define EEPROM_VERSION_RELEASE 171 // Storage of current version release - used to detect change of firmware
|
||
|
|
#define EEPROM_NB_AGC_TIME_CONST 172 // Noise blanker AGC time constant setting
|
||
|
|
#define EEPROM_CW_OFFSET_MODE 173 // CW Offset mode
|
||
|
|
#define EEPROM_FREQ_CONV_MODE 174 // Frequency Conversion Mode (e.g. I/Q frequency conversion done in receive/transmit to offset from zero)
|
||
|
|
#define EEPROM_LSB_USB_AUTO_SELECT 175 // Auto selection of LSB/USB above/below 10 MHz (including 60 meters)
|
||
|
|
#define EEPROM_VERSION_MAJOR 176 // Storage of current version build number - used to detect change of firmware
|
||
|
|
#define EEPROM_LCD_BLANKING_CONFIG 177 // Configuration of automatic LCD blanking mode settings
|
||
|
|
#define EEPROM_VOLTMETER_CALIBRATE 178 // Holder for calibration of the on-screen voltmeter
|
||
|
|
#define EEPROM_WATERFALL_COLOR_SCHEME 179 // Color scheme for waterfall display
|
||
|
|
#define EEPROM_WATERFALL_VERTICAL_STEP_SIZE 180 // Number of vertical steps of waterfall per iteration
|
||
|
|
#define EEPROM_WATERFALL_OFFSET 181 // Palette offset for waterfall
|
||
|
|
#define EEPROM_WATERFALL_CONTRAST 182 // Palette contrast multiplier for waterfall
|
||
|
|
//
|
||
|
|
// VFO A storage
|
||
|
|
//
|
||
|
|
#define EEPROM_BAND0_MODE_A 183 // Band/mode/filter memory per-band - bands indexed from here
|
||
|
|
#define EEPROM_BAND1_MODE_A 184
|
||
|
|
#define EEPROM_BAND2_MODE_A 185
|
||
|
|
#define EEPROM_BAND3_MODE_A 186
|
||
|
|
#define EEPROM_BAND4_MODE_A 187
|
||
|
|
#define EEPROM_BAND5_MODE_A 188
|
||
|
|
#define EEPROM_BAND6_MODE_A 189
|
||
|
|
#define EEPROM_BAND7_MODE_A 190
|
||
|
|
#define EEPROM_BAND8_MODE_A 191
|
||
|
|
#define EEPROM_BAND9_MODE_A 192
|
||
|
|
#define EEPROM_BAND10_MODE_A 193
|
||
|
|
#define EEPROM_BAND11_MODE_A 194
|
||
|
|
#define EEPROM_BAND12_MODE_A 195
|
||
|
|
#define EEPROM_BAND13_MODE_A 196
|
||
|
|
#define EEPROM_BAND14_MODE_A 197
|
||
|
|
#define EEPROM_BAND15_MODE_A 198
|
||
|
|
#define EEPROM_BAND16_MODE_A 199
|
||
|
|
#define EEPROM_BAND17_MODE_A 200 // "Floating" General coverage band
|
||
|
|
//
|
||
|
|
#define EEPROM_BAND0_FREQ_HIGH_A 201 // Per-band frequency, high word - bands indexed from here
|
||
|
|
#define EEPROM_BAND1_FREQ_HIGH_A 202
|
||
|
|
#define EEPROM_BAND2_FREQ_HIGH_A 203
|
||
|
|
#define EEPROM_BAND3_FREQ_HIGH_A 204
|
||
|
|
#define EEPROM_BAND4_FREQ_HIGH_A 205
|
||
|
|
#define EEPROM_BAND5_FREQ_HIGH_A 206
|
||
|
|
#define EEPROM_BAND6_FREQ_HIGH_A 207
|
||
|
|
#define EEPROM_BAND7_FREQ_HIGH_A 208
|
||
|
|
#define EEPROM_BAND8_FREQ_HIGH_A 209
|
||
|
|
#define EEPROM_BAND9_FREQ_HIGH_A 210
|
||
|
|
#define EEPROM_BAND10_FREQ_HIGH_A 211
|
||
|
|
#define EEPROM_BAND11_FREQ_HIGH_A 212
|
||
|
|
#define EEPROM_BAND12_FREQ_HIGH_A 213
|
||
|
|
#define EEPROM_BAND13_FREQ_HIGH_A 214
|
||
|
|
#define EEPROM_BAND14_FREQ_HIGH_A 215
|
||
|
|
#define EEPROM_BAND15_FREQ_HIGH_A 216
|
||
|
|
#define EEPROM_BAND16_FREQ_HIGH_A 217
|
||
|
|
#define EEPROM_BAND17_FREQ_HIGH_A 218 // "Floating" General coverage band
|
||
|
|
//
|
||
|
|
#define EEPROM_BAND0_FREQ_LOW_A 219 // Per-band frequency, high word - bands indexed from here
|
||
|
|
#define EEPROM_BAND1_FREQ_LOW_A 220
|
||
|
|
#define EEPROM_BAND2_FREQ_LOW_A 221
|
||
|
|
#define EEPROM_BAND3_FREQ_LOW_A 222
|
||
|
|
#define EEPROM_BAND4_FREQ_LOW_A 223
|
||
|
|
#define EEPROM_BAND5_FREQ_LOW_A 224
|
||
|
|
#define EEPROM_BAND6_FREQ_LOW_A 225
|
||
|
|
#define EEPROM_BAND7_FREQ_LOW_A 226
|
||
|
|
#define EEPROM_BAND8_FREQ_LOW_A 227
|
||
|
|
#define EEPROM_BAND9_FREQ_LOW_A 228
|
||
|
|
#define EEPROM_BAND10_FREQ_LOW_A 229
|
||
|
|
#define EEPROM_BAND11_FREQ_LOW_A 230
|
||
|
|
#define EEPROM_BAND12_FREQ_LOW_A 231
|
||
|
|
#define EEPROM_BAND13_FREQ_LOW_A 232
|
||
|
|
#define EEPROM_BAND14_FREQ_LOW_A 233
|
||
|
|
#define EEPROM_BAND15_FREQ_LOW_A 234
|
||
|
|
#define EEPROM_BAND16_FREQ_LOW_A 235
|
||
|
|
#define EEPROM_BAND17_FREQ_LOW_A 236 // "Floating" General coverage band
|
||
|
|
//
|
||
|
|
// VFO B storage
|
||
|
|
//
|
||
|
|
#define EEPROM_BAND0_MODE_B 237 // Band/mode/filter memory per-band - bands indexed from here
|
||
|
|
#define EEPROM_BAND1_MODE_B 238
|
||
|
|
#define EEPROM_BAND2_MODE_B 239
|
||
|
|
#define EEPROM_BAND3_MODE_B 240
|
||
|
|
#define EEPROM_BAND4_MODE_B 241
|
||
|
|
#define EEPROM_BAND5_MODE_B 242
|
||
|
|
#define EEPROM_BAND6_MODE_B 243
|
||
|
|
#define EEPROM_BAND7_MODE_B 244
|
||
|
|
#define EEPROM_BAND8_MODE_B 245
|
||
|
|
#define EEPROM_BAND9_MODE_B 246
|
||
|
|
#define EEPROM_BAND10_MODE_B 247
|
||
|
|
#define EEPROM_BAND11_MODE_B 248
|
||
|
|
#define EEPROM_BAND12_MODE_B 249
|
||
|
|
#define EEPROM_BAND13_MODE_B 250
|
||
|
|
#define EEPROM_BAND14_MODE_B 251
|
||
|
|
#define EEPROM_BAND15_MODE_B 252
|
||
|
|
#define EEPROM_BAND16_MODE_B 253
|
||
|
|
#define EEPROM_BAND17_MODE_B 254 // "Floating" General coverage band
|
||
|
|
//
|
||
|
|
//
|
||
|
|
#define EEPROM_BAND0_FREQ_HIGH_B 255 // Per-band frequency, high word - bands indexed from here
|
||
|
|
#define EEPROM_BAND1_FREQ_HIGH_B 256
|
||
|
|
#define EEPROM_BAND2_FREQ_HIGH_B 257
|
||
|
|
#define EEPROM_BAND3_FREQ_HIGH_B 258
|
||
|
|
#define EEPROM_BAND4_FREQ_HIGH_B 259
|
||
|
|
#define EEPROM_BAND5_FREQ_HIGH_B 260
|
||
|
|
#define EEPROM_BAND6_FREQ_HIGH_B 261
|
||
|
|
#define EEPROM_BAND7_FREQ_HIGH_B 262
|
||
|
|
#define EEPROM_BAND8_FREQ_HIGH_B 263
|
||
|
|
#define EEPROM_BAND9_FREQ_HIGH_B 264
|
||
|
|
#define EEPROM_BAND10_FREQ_HIGH_B 265
|
||
|
|
#define EEPROM_BAND11_FREQ_HIGH_B 266
|
||
|
|
#define EEPROM_BAND12_FREQ_HIGH_B 267
|
||
|
|
#define EEPROM_BAND13_FREQ_HIGH_B 268
|
||
|
|
#define EEPROM_BAND14_FREQ_HIGH_B 269
|
||
|
|
#define EEPROM_BAND15_FREQ_HIGH_B 270
|
||
|
|
#define EEPROM_BAND16_FREQ_HIGH_B 271
|
||
|
|
#define EEPROM_BAND17_FREQ_HIGH_B 272 // "Floating" General coverage band
|
||
|
|
//
|
||
|
|
//
|
||
|
|
#define EEPROM_BAND0_FREQ_LOW_B 273 // Per-band frequency, high word - bands indexed from here
|
||
|
|
#define EEPROM_BAND1_FREQ_LOW_B 274
|
||
|
|
#define EEPROM_BAND2_FREQ_LOW_B 275
|
||
|
|
#define EEPROM_BAND3_FREQ_LOW_B 276
|
||
|
|
#define EEPROM_BAND4_FREQ_LOW_B 277
|
||
|
|
#define EEPROM_BAND5_FREQ_LOW_B 278
|
||
|
|
#define EEPROM_BAND6_FREQ_LOW_B 279
|
||
|
|
#define EEPROM_BAND7_FREQ_LOW_B 280
|
||
|
|
#define EEPROM_BAND8_FREQ_LOW_B 281
|
||
|
|
#define EEPROM_BAND9_FREQ_LOW_B 282
|
||
|
|
#define EEPROM_BAND10_FREQ_LOW_B 283
|
||
|
|
#define EEPROM_BAND11_FREQ_LOW_B 284
|
||
|
|
#define EEPROM_BAND12_FREQ_LOW_B 285
|
||
|
|
#define EEPROM_BAND13_FREQ_LOW_B 286
|
||
|
|
#define EEPROM_BAND14_FREQ_LOW_B 287
|
||
|
|
#define EEPROM_BAND15_FREQ_LOW_B 288
|
||
|
|
#define EEPROM_BAND16_FREQ_LOW_B 289
|
||
|
|
#define EEPROM_BAND17_FREQ_LOW_B 290 // "Floating" General coverage band
|
||
|
|
//
|
||
|
|
#define EEPROM_WATERFALL_SPEED 291 // Spectrum Scope Speed
|
||
|
|
#define EEPROM_SPECTRUM_SCOPE_NOSIG_ADJUST 292 // adjustment for no-signal conditions of spectrum scope
|
||
|
|
#define EEPROM_WATERFALL_NOSIG_ADJUST 293 // adjustment for no-signal conditions of waterfall
|
||
|
|
#define EEPROM_DSP_NOTCH_FFT_NUMTAPS 294 // DSP Notch FFT number of taps
|
||
|
|
#define EEPROM_SPECTRUM_SIZE 295 // size of waterfall display (and other parameters) - size setting is in lower nybble, upper nybble/byte reserved
|
||
|
|
#define EEPROM_FFT_WINDOW 296 // FFT Window information (lower nybble currently used - upper nybble reserved)
|
||
|
|
#define EEPROM_TXRX_SWITCH_AUDIO_MUTE_DELAY 297 // timer used for muting TX audio when keying PTT to suppress "click" or "thump"
|
||
|
|
#define EEPROM_FLAGS2 298 // Miscellaneous status flag, saved in EEPROM - see variable "flags2"
|
||
|
|
#define EEPROM_FILTER_DISP_COLOUR 299 // This contains the color of the line under the spectrum/waterfall display
|
||
|
|
#define EEPROM_TX_IQ_10M_GAIN_BALANCE_TRANS_OFF 300 // IQ Gain balance for AM transmission
|
||
|
|
#define EEPROM_TX_IQ_10M_PHASE_BALANCE_TRANS_OFF 301 // IQ Gain balance for FM transmission
|
||
|
|
#define EEPROM_FM_SUBAUDIBLE_TONE_GEN 302 // index for storage of subaudible tone generation
|
||
|
|
#define EEPROM_FM_TONE_BURST_MODE 303 // tone burst mode
|
||
|
|
#define EEPROM_FM_SQUELCH_SETTING 304 // FM squelch setting
|
||
|
|
#define EEPROM_FM_RX_BANDWIDTH 305 // bandwidth setting for FM reception
|
||
|
|
#define EEPROM_RX_IQ_FM_GAIN_BALANCE 306 // IQ Gain balance for AM reception
|
||
|
|
#define EEPROM_FM_SUBAUDIBLE_TONE_DET 307 // index for storage of subaudible tone detection
|
||
|
|
#define EEPROM_KEYBOARD_BEEP_FREQ 308 // keyboard beep frequency (in Hz)
|
||
|
|
#define EEPROM_BEEP_LOUDNESS 309 // loudness of beep (keyboard, sidetone test)
|
||
|
|
#define EEPROM_VERSION_MINOR 310 // Storage of current minor version number - used to detect change of firmware
|
||
|
|
|
||
|
|
#define EEPROM_DETECTOR_COUPLING_COEFF_160M 311 // Calibration coupling coefficient for FWD/REV power sensor for 160 meters
|
||
|
|
#define EEPROM_DETECTOR_COUPLING_COEFF_6M 312 // Calibration coupling coefficient for FWD/REV power sensor for 6 meters
|
||
|
|
#define EEPROM_TUNE_POWER_LEVEL 313
|
||
|
|
// #define EEPROM_CAT_MODE_ACTIVE 314
|
||
|
|
#define EEPROM_CAT_XLAT 315
|
||
|
|
//#define EEPROM_CAT_IN_SANDBOX 316
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
#define EEPROM_METER_COLOUR_UP 327
|
||
|
|
#define EEPROM_METER_COLOUR_DOWN 328
|
||
|
|
#define EEPROM_FILTER_PATH_MAP_BASE 329 //
|
||
|
|
#define EEPROM_FILTER_PATH_MAP_END (329 + FILTER_MODE_MAX*FILTER_PATH_MEM_MAX) // this is currently 5*5 = 25
|
||
|
|
//#define EEPROM_SPECTRUM_LIGHT_ENABLE 355
|
||
|
|
#define EEPROM_MANUAL_NOTCH 356
|
||
|
|
#define EEPROM_MANUAL_PEAK 357
|
||
|
|
#define EEPROM_TX_IQ_80M_PHASE_BALANCE_TRANS_OFF 358 // IQ Gain balance for AM reception
|
||
|
|
#define EEPROM_DISPLAY_DBM 359 // dbm display
|
||
|
|
#define EEPROM_BASS_GAIN 360 // bass gain lowShelf filter
|
||
|
|
#define EEPROM_TREBLE_GAIN 361 // treble gain highShelf filter
|
||
|
|
//#define EEPROM_S_METER 362 // S-Meter configuration
|
||
|
|
#define EEPROM_TX_FILTER 363 // TX_Filter configuration
|
||
|
|
//#define EEPROM_TX_BASS_GAIN 364 // TX bass gain lowShelf filter
|
||
|
|
//#define EEPROM_TX_TREBLE_GAIN 365 // TX treble gain highShelf filter
|
||
|
|
#define EEPROM_TX_EQ0_GAIN 364 // TX bass EQ filter
|
||
|
|
#define EEPROM_TX_EQ4_GAIN 365 // TX treble EQ filter
|
||
|
|
#define EEPROM_SAM_PLL_LOCKING_RANGE 366 //
|
||
|
|
#define EEPROM_SAM_PLL_STEP_RESPONSE 367 //
|
||
|
|
#define EEPROM_SAM_PLL_BANDWIDTH 368 //
|
||
|
|
#define EEPROM_I2C1_SPEED 369 //
|
||
|
|
#define EEPROM_I2C2_SPEED 370 //
|
||
|
|
#define EEPROM_SAM_FADE_LEVELER 371
|
||
|
|
#define EEPROM_LINEOUT_GAIN 372
|
||
|
|
#define EEPROM_IQ_AUTO_CORRECTION 373 // Receive IQ auto correction ON/OFF
|
||
|
|
//#define EEPROM_AGC_WDSP_SWITCH 374
|
||
|
|
#define EEPROM_AGC_WDSP_MODE 375
|
||
|
|
#define EEPROM_AGC_WDSP_THRESH 376
|
||
|
|
#define EEPROM_AGC_WDSP_SLOPE 377
|
||
|
|
#define EEPROM_AGC_WDSP_HANG 378
|
||
|
|
#define EEPROM_DBM_CALIBRATE 379
|
||
|
|
#define EEPROM_AGC_WDSP_TAU_DECAY_0 380
|
||
|
|
#define EEPROM_AGC_WDSP_TAU_HANG_DECAY 381
|
||
|
|
#define EEPROM_RTC_CALIB 382
|
||
|
|
#define EEPROM_AGC_WDSP_TAU_DECAY_1 383
|
||
|
|
#define EEPROM_AGC_WDSP_TAU_DECAY_2 384
|
||
|
|
#define EEPROM_AGC_WDSP_TAU_DECAY_3 385
|
||
|
|
#define EEPROM_AGC_WDSP_TAU_DECAY_4 386
|
||
|
|
|
||
|
|
#define EEPROM_LOW_POWER_CONFIG 387
|
||
|
|
#define EEPROM_CW_KEYER_WEIGHT 388
|
||
|
|
#define EEPROM_DIGI_MODE_CONF 389
|
||
|
|
#define EEPROM_Scope_TRACE_HL_BW 390
|
||
|
|
#define EEPROM_Scope_TRACE_HL_BW_BGR 391
|
||
|
|
#define EEPROM_TScal0_High 392 //callibration data for touchscreen (all data are int32_t divided in two 16bit chunks)
|
||
|
|
#define EEPROM_TScal0_Low 393
|
||
|
|
#define EEPROM_TScal1_High 394
|
||
|
|
#define EEPROM_TScal1_Low 395
|
||
|
|
#define EEPROM_TScal2_High 396
|
||
|
|
#define EEPROM_TScal2_Low 397
|
||
|
|
#define EEPROM_TScal3_High 398
|
||
|
|
#define EEPROM_TScal3_Low 399
|
||
|
|
#define EEPROM_TScal4_High 400
|
||
|
|
#define EEPROM_TScal4_Low 401
|
||
|
|
#define EEPROM_TScal5_High 402
|
||
|
|
#define EEPROM_TScal5_Low 403
|
||
|
|
#define EEPROM_CW_DECODER_ENABLE 404
|
||
|
|
#define EEPROM_Scope_Graticule_Ypos 405
|
||
|
|
#define EEPROM_Freq_Display_Font 406
|
||
|
|
#define EEPROM_NUMBER_OF_ENTRIES 407 // this is the index of the config value which holds the number of used config entries
|
||
|
|
// , not the value itself (which is in fact EEPROM_FIRST_UNUSED)
|
||
|
|
|
||
|
|
#define EEPROM_DSP_MODE_MASK 408
|
||
|
|
#define EEPROM_ENABLE_PTT_RTS 409
|
||
|
|
#define EEPROM_CW_DECODER_THRESH 410
|
||
|
|
#define EEPROM_CW_DECODER_BLOCKSIZE 411
|
||
|
|
#define EEPROM_SMETER_ALPHAS 412
|
||
|
|
#define EEPROM_ADJ_TX_IQ_SOMEBANDS 413 // unused, may be reused due to short usage time in its original
|
||
|
|
#define EEPROM_TX_IQ_20M_GAIN_BALANCE 414
|
||
|
|
#define EEPROM_TX_IQ_20M_PHASE_BALANCE 415
|
||
|
|
#define EEPROM_TX_IQ_15M_GAIN_BALANCE 416
|
||
|
|
#define EEPROM_TX_IQ_15M_PHASE_BALANCE 417
|
||
|
|
#define EEPROM_TX_IQ_10M_UP_GAIN_BALANCE 418
|
||
|
|
#define EEPROM_TX_IQ_10M_UP_PHASE_BALANCE 419
|
||
|
|
#define EEPROM_TX_IQ_20M_GAIN_BALANCE_TRANS_OFF 420
|
||
|
|
#define EEPROM_TX_IQ_20M_PHASE_BALANCE_TRANS_OFF 421
|
||
|
|
#define EEPROM_TX_IQ_15M_GAIN_BALANCE_TRANS_OFF 422
|
||
|
|
#define EEPROM_TX_IQ_15M_PHASE_BALANCE_TRANS_OFF 423
|
||
|
|
#define EEPROM_TX_IQ_10M_UP_GAIN_BALANCE_TRANS_OFF 424
|
||
|
|
#define EEPROM_TX_IQ_10M_UP_PHASE_BALANCE_TRANS_OFF 425
|
||
|
|
#define EEPROM_VSWR_PROTECTION_THRESHOLD 426
|
||
|
|
#define EEPROM_EXPFLAGS1 427 // Flags for options in Debug/Expert menu - see variable "expflags1"
|
||
|
|
//#define EEPROM_FIRST_UNUSED 428 // change this if new value ids are introduced, must be correct at any time
|
||
|
|
#define EEPROM_LO_TX_SUPR0_0 428
|
||
|
|
#define EEPROM_LO_TX_SUPR0_1 429
|
||
|
|
#define EEPROM_LO_TX_SUPR0_2 430
|
||
|
|
#define EEPROM_LO_TX_SUPR0_3 431
|
||
|
|
#define EEPROM_LO_TX_SUPR0_4 432
|
||
|
|
#define EEPROM_LO_TX_SUPR0_5 433
|
||
|
|
#define EEPROM_LO_TX_SUPR0_6 434
|
||
|
|
#define EEPROM_LO_TX_SUPR0_7 435
|
||
|
|
#define EEPROM_LO_TX_SUPR0_8 436
|
||
|
|
#define EEPROM_LO_TX_SUPR0_9 437
|
||
|
|
#define EEPROM_LO_TX_SUPR0_10 438
|
||
|
|
#define EEPROM_LO_TX_SUPR0_11 439
|
||
|
|
#define EEPROM_LO_TX_SUPR0_12 440
|
||
|
|
#define EEPROM_LO_TX_SUPR1_0 441
|
||
|
|
#define EEPROM_LO_TX_SUPR1_1 442
|
||
|
|
#define EEPROM_LO_TX_SUPR1_2 443
|
||
|
|
#define EEPROM_LO_TX_SUPR1_3 444
|
||
|
|
#define EEPROM_LO_TX_SUPR1_4 445
|
||
|
|
#define EEPROM_LO_TX_SUPR1_5 446
|
||
|
|
#define EEPROM_LO_TX_SUPR1_6 447
|
||
|
|
#define EEPROM_LO_TX_SUPR1_7 448
|
||
|
|
#define EEPROM_LO_TX_SUPR1_8 449
|
||
|
|
#define EEPROM_LO_TX_SUPR1_9 450
|
||
|
|
#define EEPROM_LO_TX_SUPR1_10 451
|
||
|
|
#define EEPROM_LO_TX_SUPR1_11 452
|
||
|
|
#define EEPROM_LO_TX_SUPR1_12 453
|
||
|
|
#define EEPROM_BOX_COLOUR 454
|
||
|
|
#define EEPROM_DETECTOR_COUPLING_COEFF_10M 455 // Calibration coupling coefficient for FWD/REV power sensor for 10 meters
|
||
|
|
#define EEPROM_TX_IQ_6M_GAIN_BALANCE 456
|
||
|
|
#define EEPROM_TX_IQ_6M_PHASE_BALANCE 457
|
||
|
|
#define EEPROM_TX_IQ_6M_GAIN_BALANCE_TRANS_OFF 458
|
||
|
|
#define EEPROM_TX_IQ_6M_PHASE_BALANCE_TRANS_OFF 459
|
||
|
|
#define EEPROM_TX_IQ_6M_PHASE_BALANCE_TRANS_OFF 459
|
||
|
|
#define EEPROM_PEAK_IND_TUNE 460 // in 1/4 sec, 0 is OFF
|
||
|
|
#define EEPROM_XVERTER_OFFSET_TX_HIGH 461 // Secondary frequency by which the display is offset for transverter use, high word
|
||
|
|
#define EEPROM_XVERTER_OFFSET_TX_LOW 462 // Secondary frequency by which the display is offset for transverter use, low word
|
||
|
|
#define EEPROM_LO_TX_SUPR0_13 463 // Wild zone
|
||
|
|
#define EEPROM_LO_TX_SUPR1_13 464 // Wild zone
|
||
|
|
#define EEPROM_LO_TX_SUPR0_14 465 // 28 MHz Up
|
||
|
|
#define EEPROM_LO_TX_SUPR1_14 466 // 28 MHz Up
|
||
|
|
#define EEPROM_TXTLINE_COLOUR 467 // Ticker colour
|
||
|
|
#define EEPROM_CW_SMOOTH 468 // Smooth of CW signal edges
|
||
|
|
#define EEPROM_PWR_SCALE_GEN 469 // Power scale for Gen band 5W
|
||
|
|
#define EEPROM_EXPFLAGS2 470 // Flags for options in the system menu - see variable "expflags2"
|
||
|
|
#define EEPROM_PWR_SCALE_GEN_FULL 471 // Power scale for Gen band FULL POWER
|
||
|
|
#define EEPROM_AMBER_BANDCODE 472
|
||
|
|
#define EEPROM_ANR_N_TAPS 473
|
||
|
|
#define EEPROM_ANR_DELAY 474
|
||
|
|
#define EEPROM_ANR_TWO_MU_INT 475
|
||
|
|
#define EEPROM_ANR_GAMMA_INT 476
|
||
|
|
#define EEPROM_CW_DECODER_FLAGS 477 // Various flags controlling operation of CW decoder
|
||
|
|
#define EEPROM_BAND_REGION 478 // store which region the TRX is being used in
|
||
|
|
|
||
|
|
#define EEPROM_TX_IQ_160M_GAIN_BALANCE 479 // Advanced I/Q justify
|
||
|
|
#define EEPROM_TX_IQ_160M_PHASE_BALANCE 480
|
||
|
|
#define EEPROM_TX_IQ_40M_GAIN_BALANCE 481
|
||
|
|
#define EEPROM_TX_IQ_40M_PHASE_BALANCE 482
|
||
|
|
#define EEPROM_TX_IQ_30M_GAIN_BALANCE 483
|
||
|
|
#define EEPROM_TX_IQ_30M_PHASE_BALANCE 484
|
||
|
|
#define EEPROM_TX_IQ_17M_GAIN_BALANCE 485
|
||
|
|
#define EEPROM_TX_IQ_17M_PHASE_BALANCE 486
|
||
|
|
#define EEPROM_TX_IQ_12M_GAIN_BALANCE 487
|
||
|
|
#define EEPROM_TX_IQ_12M_PHASE_BALANCE 488
|
||
|
|
|
||
|
|
#define EEPROM_TX_IQ_160M_GAIN_BALANCE_TRANS_OFF 489
|
||
|
|
#define EEPROM_TX_IQ_160M_PHASE_BALANCE_TRANS_OFF 490
|
||
|
|
#define EEPROM_TX_IQ_40M_GAIN_BALANCE_TRANS_OFF 491
|
||
|
|
#define EEPROM_TX_IQ_40M_PHASE_BALANCE_TRANS_OFF 492
|
||
|
|
#define EEPROM_TX_IQ_30M_GAIN_BALANCE_TRANS_OFF 493
|
||
|
|
#define EEPROM_TX_IQ_30M_PHASE_BALANCE_TRANS_OFF 494
|
||
|
|
#define EEPROM_TX_IQ_17M_GAIN_BALANCE_TRANS_OFF 495
|
||
|
|
#define EEPROM_TX_IQ_17M_PHASE_BALANCE_TRANS_OFF 496
|
||
|
|
#define EEPROM_TX_IQ_12M_GAIN_BALANCE_TRANS_OFF 497
|
||
|
|
#define EEPROM_TX_IQ_12M_PHASE_BALANCE_TRANS_OFF 498
|
||
|
|
#define EEPROM_TX_REVERB_GAIN 499
|
||
|
|
#define EEPROM_TX_REVERB_DELAY 500
|
||
|
|
#define EEPROM_TX_EQ1_GAIN 501
|
||
|
|
#define EEPROM_TX_EQ2_GAIN 502
|
||
|
|
#define EEPROM_TX_EQ3_GAIN 503
|
||
|
|
#define EEPROM_IQ_FREQ_DELTA 504
|
||
|
|
#define EEPROM_EXPFLAGS3 505 // Flags for options in the system menu - see variable "expflags3"
|
||
|
|
#define EEPROM_INPUT_STATE 506 // State of input group - TRX Amber etc.
|
||
|
|
//#define EEPROM_CQ_COLOUR 507
|
||
|
|
#define EEPROM_FIRST_UNUSED 507 // change this if new value ids are introduced, must be correct at any time
|
||
|
|
|
||
|
|
#define MAX_VAR_ADDR (EEPROM_FIRST_UNUSED - 1) // Max 511
|
||
|
|
|
||
|
|
// Note: EEPROM addresses up to 383 are currently defined. If this value is passed you
|
||
|
|
// need to modify virtual EEPROM routines otherwise system may crash
|
||
|
|
|
||
|
|
//#define EEPROM_KEYER_MEMORY_ADDRESS 0x1000
|
||
|
|
#define EEPROM_KEYER_MEMORY_ADDRESS 0x3C30
|
||
|
|
#define EEPROM_MEMS_MEMORY_ADDRESS 0x3F5C
|
||
|
|
#define EEPROM_XVTR_MEMORY_ADDRESS 0x535D
|
||
|
|
|
||
|
|
#endif /* DRIVERS_UI_UI_CONFIGURATION_H_ */
|