magnum88/UHSDR
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2_12_2m9t
UHSDR/UHSDR-active-devel/mchf-embitz
History
Xavier 5765dbd675 first commit
2022-08-24 08:41:00 +02:00
..
.gitignore first commit 2022-08-24 08:41:00 +02:00
bootloader_f7.ebp first commit 2022-08-24 08:41:00 +02:00
bootloader.ebp first commit 2022-08-24 08:41:00 +02:00
cmsis_dsp_f7.ebp first commit 2022-08-24 08:41:00 +02:00
cmsis_dsp_h7.ebp first commit 2022-08-24 08:41:00 +02:00
cmsis_dsp.ebp first commit 2022-08-24 08:41:00 +02:00
Readme.md first commit 2022-08-24 08:41:00 +02:00
stm32f4xx_hal.ebp first commit 2022-08-24 08:41:00 +02:00
stm32f7xx_hal.ebp first commit 2022-08-24 08:41:00 +02:00
stm32h7xx_hal.ebp first commit 2022-08-24 08:41:00 +02:00
uhsdr_f7.ebp first commit 2022-08-24 08:41:00 +02:00
uhsdr_h7.ebp first commit 2022-08-24 08:41:00 +02:00
uhsdr-embitz.eworkspace first commit 2022-08-24 08:41:00 +02:00
uhsdr.ebp first commit 2022-08-24 08:41:00 +02:00

Readme.md

PLEASE NOTE: EMBITZ BUILD IS CURRENTLY UNMAINTAINED Builds are mostly not working. Looking for volunteers!

Building uhsdr firmware with EmBitz

This document describes how to build the uhsdr firmware using the EmBitz IDE on windows.

What is EmBitz

EmBitz (formerly Em::Blocks) is a powerful C/C++ IDE for embedded software development on Windows. It is a free IDE built as a derivative of Code::Block but specifically tailored for embedded software development. It comes with a bundled GNU ARM compiler 5.4 with different optimized libraries. See features at Embitz.org.

It is a light and fast IDE compared to Eclipse but with a lot of handy and powerfull features for embedded development. See the discussion on inexpensive ARM development tools on EEVBLOG electronics Community Forum.

Prerequisites

  • EmBitz works on windows 7 and up.
  • Optional : Building the uhsdr firmware with the bundled GNU ARM toolchain 5.4 is fine, but you can install independent GNU ARM Embedded Toolchains if you prefer another toolchain version.
  • Optional : EmBitz doesn't include any Git interface or plugin, an external Git tool is needed to publish your modifications on GitHub. GitHub Desktop or SmartGit are very easy to use. Read the explanations by DF8OE in the CONTRIBUTING.md file.

Building

  • Open the uhsdr-embitz.eworkspace file into EmBitz (File/Open/Workspace files menu)
  • Change the ar toolchain archiver to arm-none-eabi-gcc-ar.exe (Settings/Tools/Global Compiler Settings/Toolchain Executables), this is to allow link time optimization of libraries
  • Select the Release target of all projects and build them.
  • The ready to flash fw-xxx.bin file is in mchf-embitz/bin/Release directory.

Debugging

EmBitz uses own tailor made GDB debuggers, allowing some features such as live variables and "hot" connect to running targets without stopping. The integrated ARM GDB supports the inexpensive ST-LINK V2 clones from Ebay.

  • Select the Debug target of all projects and build them.
  • Press and hold the POWER button of the radio and start the debug session with the F8 key. The GDB is started and automatically flashes the firmware onto the CPU. Don't release the POWER button until the main firmware is run to the point where the GPIO pin controlling the power (POWERDOWN signal) is set. ** Once powered on, the firmware could be reseted or halted and breakpoints could be set without loosing the power.

Have fun - Open-Source opens possibilities!

F4FHH, Nicolas