magnum88/UHSDR
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0ba62c225f
UHSDR/UHSDR-active-devel/mchf-eclipse/hardware/uhsdr_board.h
Xavier f838fa66c4 first commit
2022-11-08 16:13:55 +01:00

1006 lines
41 KiB
C
Raw Blame History

/* -*- mode: c; tab-width: 4; indent-tabs-mode: t; c-basic-offset: 4; coding: utf-8 -*- */
/************************************************************************************
** **
** mcHF QRP Transceiver **
** K Atanassov - M0NKA 2014 **
** **
**---------------------------------------------------------------------------------**
** **
** File name: **
** Description: **
** Last Modified: **
** Licence: GNU GPLv3 **
************************************************************************************/
#ifndef __MCHF_BOARD_H
#define __MCHF_BOARD_H
#include "uhsdr_board_config.h"
#include "uhsdr_mcu.h"
#include "uhsdr_types.h"
#include "audio_filter.h"
#include "osc_interface.h"
#include "ui_lcd_layouts.h"
#include "ui_lcd_hy28.h"
#include "ui_vkeybrd.h"
#include "audio_driver.h"
struct mchf_waterfall
{
uint8_t color_scheme; // stores waterfall color scheme
uint8_t vert_step_size; // vertical step size in waterfall mode
// int32_t offset; // offset for waterfall display
uint32_t contrast; // contrast setting for waterfall display
uint8_t speed; // speed of update of the waterfall
// uint8_t nosig_adjust; // Adjustment for no signal adjustment conditions for waterfall
uint16_t scheduler;
};
// -----------------------------------------------------------------------------
// -----------------------------------------------------------------------------
#define TRX_MODE_RX 0
#define TRX_MODE_TX 1
typedef enum {
DEMOD_USB = 0,
DEMOD_LSB = 1,
DEMOD_CW = 2,
DEMOD_AM = 3,
DEMOD_SAM = 4,
DEMOD_FM = 5,
DEMOD_DIGI = 6,
#ifdef USE_TWO_CHANNEL_AUDIO
DEMOD_SSBSTEREO = 7,
DEMOD_IQ = 8,
#endif
DEMOD_NUM_MODE
} DemodModes_t;
#define DEMOD_MAX_MODE (DEMOD_NUM_MODE-1)
// codec x demod
// analog USB LSB CW AM FM SAM
// FreeDV USB LSB - - - -
#define MIN_FREQ_CAL -1499 // Minimum and maximum range of frequency calibration in 10xppm
#define MAX_FREQ_CAL 1499
#define MAX_BANDS 17 // Highest band number: 17 = General coverage (RX only) band
#define MAX_BAND_NUM (MAX_BANDS+1) // Number of Bands
// opposed to the RF_BRD_MCHF / RF_BRD_OVI40 which are
// compile time constants, the FOUND_RF_BOARD_xx is a runtime detected property
typedef enum {
FOUND_RF_BOARD_MCHF = 0,
FOUND_RF_BOARD_OVI40 = 1,
} RfBoard_t;
#define CW_KEYER_MODE_IAM_B 0
#define CW_KEYER_MODE_IAM_A 1
#define CW_KEYER_MODE_STRAIGHT 2
#define CW_KEYER_MODE_ULTIMATE 3
#define CW_KEYER_MAX_MODE 3
#define SSB_TUNE_FREQ 750 // Frequency at which the SSB TX IQ gain and phase adjustment is to be done
//
#define VOICE_TX2RX_DELAY_DEFAULT 450 // Delay for switching when going from TX to RX (this is 0.66uS units)
//
// IQ source RX demodulation
enum
{
RX_IQ_CODEC = 0, // IQ from codec
RX_IQ_DIGIQ, // IQ from USB audio
RX_IQ_DIG, // demodulated audio
RX_IQ_NUM
};
// Audio sources for TX modulation
#define TX_AUDIO_MIC 0
#define TX_AUDIO_LINEIN_L 1
#define TX_AUDIO_LINEIN_R 2
#define TX_AUDIO_DIG 3
#define TX_AUDIO_DIGIQ 4
#define TX_AUDIO_MAX_ITEMS 4
#define TX_AUDIO_NUM (TX_AUDIO_MAX_ITEMS +1)
//
#define LINE_GAIN_MIN 3
#define LINE_GAIN_MAX 31
#define LINE_GAIN_DEFAULT 12 // Original fixed gain setting
//
#define MIC_GAIN_MIN 2
#define MIC_GAIN_MAX 99
#define MIC_GAIN_DEFAULT 15 // Default value - close to original fixed setting
//
//
#define TX_POWER_FACTOR_MIN 3 // Minimum power factor setting (3 = 0.03)
#define TX_POWER_FACTOR_MAX_INTERNAL 0.55 // we limit power factor to 55 (.55) . This limit is independent of the possible scale factor 4 for the power factor
#define TX_POWER_FACTOR_MAX (TX_POWER_FACTOR_MAX_INTERNAL*400.0) // Please keep in mind that this is only a setting value maximum. Depending on the flags this reduced by 4 before further use.
//And the true maximum is defined above in TX_POWER_FACTOR_MAX_INTERNAL
//
// Default power factors for 5 watt and FULL settings in percent
// These power factors are based on the original fixed values
//
#define TX_POWER_FACTOR_80_DEFAULT 0
#define TX_POWER_FACTOR_60_DEFAULT 0
#define TX_POWER_FACTOR_40_DEFAULT 0
#define TX_POWER_FACTOR_30_DEFAULT 0
#define TX_POWER_FACTOR_20_DEFAULT 0
#define TX_POWER_FACTOR_17_DEFAULT 0
#define TX_POWER_FACTOR_15_DEFAULT 0
#define TX_POWER_FACTOR_12_DEFAULT 0
#define TX_POWER_FACTOR_10_DEFAULT 0
#define TX_POWER_FACTOR_6_DEFAULT 0
#define TX_POWER_FACTOR_4_DEFAULT 0
#define TX_POWER_FACTOR_2_DEFAULT 0
#define TX_POWER_FACTOR_70_DEFAULT 0
#define TX_POWER_FACTOR_23_DEFAULT 0
#define TX_POWER_FACTOR_2200_DEFAULT 0
#define TX_POWER_FACTOR_630_DEFAULT 0
#define TX_POWER_FACTOR_160_DEFAULT 0
//
// Enumeration of colours used in spectrum scope display
//
typedef enum
{
SPEC_WHITE = 0,
SPEC_GREY,
SPEC_BLUE,
SPEC_RED1,
SPEC_RED2,
SPEC_RED3,
SPEC_MAGENTA,
SPEC_GREEN,
SPEC_CYAN,
SPEC_YELLOW,
SPEC_ORANGE,
SPEC_CREAM,
SPEC_BLACK,
SPEC_GREY1,
SPEC_GREY2,
SPEC_GREY3,
SPEC_GREY4,
SPEC_GREY5,
SPEC_GREY6,
SPEC_GREY7,
SPEC_RED4,
SPEC_GREEN2,
SPEC_BLUE3,
SPEC_BROWN,
SPEC_MAX_COLOUR,
} mchf_color_t;
typedef struct {
const uint32_t value;
const char* name;
} ColorNameValue;
// this data structure needs to be in sync with the color definitions above
// otherwise strange colors may become visible in the UI.
extern const ColorNameValue MchfColor_Id2ValueName[SPEC_MAX_COLOUR];
// Enumeration of transmit meter modes
enum
{
METER_SWR = 0,
METER_AUDIO,
METER_ALC,
METER_MAX,
};
//
#define BACKLIGHT_BLANK_TIMING_DEFAULT 8 // default number of SECONDS for backlight blanking
#define LCD_STARTUP_BLANKING_TIME 3000 // number of DECISECONDS (e.g. SECONDS * 100) after power-up before LCD blanking occurs if no buttons are pressed/knobs turned
#define LOW_POWER_SHUTDOWN_DELAY_TIME 6000 // number of DECISECONDS after power-up before low power auto shutdown is checked
#ifndef SDR_AMBER
enum
{
INPUT_NOIPO = 0,
INPUT_IPO,
INPUT_ATT12,
INPUT_ATT24,
};
#endif
// Enumeration of transmit tune modes
typedef enum
{
TUNE_TONE_SINGLE = 0,
TUNE_TONE_TWO,
TUNE_TONE_MAX,
} TuneToneMode;
typedef struct Gain_s
{
uint8_t value;
uint8_t max;
uint8_t value_old;
float32_t active_value;
} Gain;
typedef struct {
int32_t value[IQ_TRANS_NUM];
} iq_balance_data_t;
//#define KEYER_BUTTONS 3
#define KEYER_BUTTONS 4
#define KEYER_BUTTON_NONE -1
#define KEYER_BUTTON_1 0
#define KEYER_BUTTON_2 1
#define KEYER_BUTTON_3 2
#define KEYER_BUTTON_4 3
#define KEYER_MACRO_LEN 200
#define KEYER_CAP_LEN 6
typedef struct {
bool active;
int8_t button_recording;
uint8_t macro[KEYER_BUTTONS][KEYER_MACRO_LEN];
uint8_t cap[KEYER_BUTTONS][KEYER_CAP_LEN + 1];
}
keyer_mode_t;
static uint32_t mem_data[4][2][20];
static uint32_t xvtr_data[4][3];
static uint16_t bw_data[10][20];
typedef enum
{
TXRX_U = 0,
TXRX_B,
CYCLED,
BEACON,
} keyer_mode_tx_t;
//
// Bands tuning values - WORKING registers - used "live" during transceiver operation
// (May contain VFO A, B or "Memory" channel values)
//
typedef struct vfo_reg_s
{
uint32_t dial_value;
uint8_t decod_mode;
uint8_t digital_mode;
// uint32_t filter_mode;
int32_t dial_delta;
} VfoReg;
typedef enum
{
BEACON_INTERVAL_1M = 0,
BEACON_INTERVAL_3M,
BEACON_INTERVAL_5M,
BEACON_INTERVAL_10M,
BEACON_INTERVAL_15M,
} beacon_int_t;
typedef struct BandInfo BandInfo; // forward declaration of BandInfo data type, we need this to be able to make a pointer to it.
// Transceiver state public structure
typedef struct TransceiverState
{
// Sampling rate public flag
uint32_t samp_rate;
// Virtual pots public values
int16_t rit_value;
#define RX_AUDIO_SPKR 0
#define RX_AUDIO_DIG 1
Gain rx_gain[2]; //ts.rx_gain[RX_AUDIO_SPKR].value
uint8_t lineout_gain; // lineout gain to control lineout level
#define MAX_RF_CODEC_GAIN_VAL 9 // Maximum RF gain setting
#define DEFAULT_RF_CODEC_GAIN_VAL 9 // Default RF gain setting (9 = AUTO mode)
#define RF_CODEC_GAIN_AUTO 9 // Default RF gain setting (9 = AUTO mode)
uint8_t rf_codec_gain; // gain for codec (A/D converter) in receive mode
uint8_t cw_sidetone_gain;
uint8_t pa_bias;
uint8_t pa_cw_bias;
// timer for muting of input into signal processing chains (TX/RX)
uint16_t audio_processor_input_mute_counter;
iq_float_t tx_adj_gain_var[IQ_TRANS_NUM]; // active variables for adjusting tx gain balance
iq_float_t rx_adj_gain_var; // active variables for adjusting rx gain balance
// Equalisation factor
float32_t tx_power_factor;
int freq_cal; // frequency calibration
// Frequency synthesizer
uint32_t tune_freq; // main synthesizer frequency
uint32_t tune_freq_req; // used to detect change of main synthesizer frequency
// Transceiver menu mode variables
uint8_t menu_mode; // TRUE if in menu mode
int16_t menu_item; // Used to indicate specific menu item
int menu_var; // Used to change specific menu item
bool menu_var_changed; // TRUE if something changed in a menu and that an EEPROM save should be done!
// Ham band public flag
// index of bands table in Flash
const BandInfo* band; // this band does not relate to the real frequency, it "just" a band memory.
const BandInfo* band_effective; // the band the currently selected frequency is in (which may be different from the band memory idx);
bool rx_temp_mute;
uint8_t filter_band; // filter selection band: 1= 80, 2= 60/40, 3=30/20, 4=17/15/12/10 - used for selection of power detector coefficient selection.
#define FILTER_BAND_UNKNOWN 255 // used to indicate that we don't know how the BPF is set
uint8_t coupling_band; // which tx wattmeter coupling factor value to use
//
// Receive/Transmit public flag
uint8_t txrx_mode;
bool ptt_req; // setting this to true will inform the PTT handling to switch to TX. Setting this to false has no effect if TX has been started.
// to stop TX, use tx_stop_req, see below.
bool tx_stop_req; // setting this to true will inform the PTT handling to switch to RX.
// Please note: ptt_req takes precedence over tx_stop_req if both are true.
// Demodulator mode public flag
uint8_t dmod_mode;
uint8_t enc_one_mode;
uint8_t enc_two_mode;
uint8_t enc_thr_mode;
uint8_t tx_meter_mode; // meter mode
// Audio filter ID
uint8_t filter_select[AUDIO_FILTER_NUM];
#define FILTER_PATH_MEM_MAX 5
uint16_t filter_path_mem[FILTER_MODE_MAX][FILTER_PATH_MEM_MAX];
uint16_t filter_path;
const FilterPathDescriptor *filters_p;
uint16_t demod_mode_disable; // TRUE if AM mode is to be disabled
#define DEMOD_AM_DISABLE (0x0001)
#define DEMOD_CW_DISABLE (0x0002)
#define DEMOD_DIGI_DISABLE (0x0004)
// AGC mode
// uint8_t agc_mode;
// uint8_t agc_custom_decay;
// uint8_t max_rf_gain;
// Eth to UI driver requests flag
uint8_t LcdRefreshReq;
// Eth to UI public flag
uint8_t new_band;
uint8_t new_mode;
uint8_t new_digi_mode;
// Current CW mode
uint8_t cw_keyer_mode;
uint8_t cw_keyer_speed;
uint8_t cw_keyer_speed_bak;
uint8_t cw_paddle_reverse;
bool cw_text_entry;
uint8_t cw_keyer_weight; // cw dit/pause ratio 100 = 1.00 -> dit == pause == dah / 3
#define CW_KEYER_WEIGHT_DEFAULT (100)
#define CW_KEYER_WEIGHT_MAX (150)
#define CW_KEYER_WEIGHT_MIN (50)
uint8_t cw_rx_delay; // break time
#define CW_TX2RX_DELAY_DEFAULT 8
#define CW_RX_DELAY_MAX 50 // Maximum TX to RX turnaround setting
uint32_t cw_sidetone_freq;
#define CW_SIDETONE_FREQ_DEFAULT 750 // Default CW Audio Sidetone and TX offset frequency in Hz
#define CW_SIDETONE_FREQ_MIN 400
#define CW_SIDETONE_FREQ_MAX 1000
uint32_t audio_spkr_unmute_delay_count;
uint8_t power_level; // an abstract power level id
uint8_t power_scale_gen; // power scale for Gen, %
uint8_t power_scale_gen_full; // power scale for Gen, FULL POWER, %
int32_t power; // the actual request power in mW
bool power_modified; // the actual power is lower than the requested power_level, e.g. because of out side band.
uint8_t tx_audio_source;
uint8_t rx_iq_source;
//
uint8_t tx_mic_boost; // in dB
#define MIC_BOOST_DEFAULT 0 // 0 dB boost (no boost)
#define MIC_BOOST_MIN 0
#define MIC_BOOST_DYNAMIC 14 // 14 dB boost ( 25.1)
#define MIC_BOOST_MAX 20 // 20 dB boost (100.0) {more is not better}
//
uint32_t tx_mic_gain_mult;
uint8_t tx_gain[TX_AUDIO_NUM];
int16_t tx_comp_level; // Used to hold compression level which is used to calculate other values for compression. 0 = manual.
// Global tuning flag - in every demod mode
uint8_t tune;
uint16_t ee_init_stat;
uint8_t powering_down;
// Spectrum Scope config - placed here since "sd." not defined at time of init
uint8_t spectrum_size; // size of waterfall display (and other parameters) - size setting is in lower nybble, upper nybble/byte reserved
uint8_t spectrum_filter; // strength of filter in spectrum scope
uint8_t spectrum_centre_line_colour; // color of center line of scope grid
uint8_t spectrum_freqscale_colour; // color of spectrum scope frequency scale
uint8_t spectrum_agc_rate; // agc rate on the 'scope
uint8_t spectrum_db_scale; // db/Division scale setting on spectrum scope
// uint8_t fft_window_type; // type of windowing function applied to scope/waterfall. At the moment, only lower 4 bits are used - upper 4 bits are reserved
uint16_t scope_scheduler; // timer for scheduling the next update of the spectrum scope update, updated at DMA rate
uint8_t scope_speed; // update rate for spectrum scope
uint8_t scope_trace_colour; // color of spectrum scope trace;
uint8_t scope_grid_colour; // saved color of spectrum scope grid;
uint8_t scope_trace_BW_colour; // color of BW highlighted spectrum scope trace
uint8_t scope_backgr_BW_colour; // color of BW highlighted background of spectrum scope (% of white)
// uint8_t spectrum_scope_nosig_adjust; // Adjustment for no signal adjustment conditions for spectrum scope
struct mchf_waterfall waterfall;
uint8_t box_colour; // screen boxes color
uint8_t txtline_colour; // ticker color
uint8_t cw_smooth; // smooth of CW signal edges
uint8_t cw_smooth_len; // duration of CW signal edges
uint8_t cw_smooth_steps; // duration steps of CW signal edges
// uint8_t xverter_mode; // TRUE if transverter mode active
uint32_t xverter_mode; // TRUE if transverter mode active
uint32_t xverter_offset; // frequency offset for transverter (added to frequency display)
uint32_t xverter_offset_tx; // used for tx if set, frequency offset for transverter (added to frequency display)
//
// Calibration factors for output power, in percent (100 = 1.00)
//
#define ADJ_REF_PWR 0
#define ADJ_FULL_POWER 1
uint8_t pwr_adj[2][MAX_BAND_NUM];
//
uint32_t alc_decay; // adjustable ALC release time - EEPROM read/write version
uint32_t alc_decay_var; // adjustable ALC release time - working variable version
uint32_t alc_tx_postfilt_gain; // amount of gain after the TX audio filtering - EEPROM read/write version
uint32_t alc_tx_postfilt_gain_var; // amount of gain after the TX audio filtering - working variable version
// we can use AT least the upper 8 bits of freq_step_config for other purpose since these have not been used and are all initialized with 0)
#define FREQ_STEP_SWAP_BTN 0x10
#define FREQ_STEP_SHOW_MARKER 0x01
uint16_t freq_step_config; // configuration of step size (line, step button reversal) - setting any of the 4 upper bits -> step button switch, any of the lower bits -> frequency marker display enabled
uint8_t digital_mode; // holds actual digital mode
dsp_params_t dsp;
uint8_t lcd_backlight_brightness; // LCD backlight dimming, 0-LCD_DIMMING_LEVEL_MAX: 0 = full, LCD_DIMMING_LEVEL_MAX = dimmest
#define LCD_DIMMING_LEVEL_MAX 5
#define LCD_DIMMING_LEVEL_MIN 0
#define LCD_BLANKING_ENABLE 0x80
#define LCD_BLANKING_TIMEMASK 0x0f
uint8_t lcd_backlight_blanking; // for controlling backlight auto-off control
#define LOW_POWER_ENABLE 0x80 // bit7 shows enable / no enable
#define LOW_POWER_ENABLE_MASK 0x80
#define LOW_POWER_THRESHOLD_OFFSET 30 // value stored in the configuration variable is lower by this offset
#define LOW_POWER_THRESHOLD_MASK 0x7f
#define LOW_POWER_THRESHOLD_DEFAULT 0
#define LOW_POWER_THRESHOLD_MIN 0
#define LOW_POWER_THRESHOLD_MAX 126
uint8_t low_power_config; // for voltage colours and auto shutdown
uint32_t low_power_shutdown_time; // earliest time when auto shutdown can be executed
//
uint8_t tune_step; // Used for press-and-hold tune step adjustment
uint32_t tune_step_idx_holder; // used to hold the original step size index during the press-and-hold
//
bool frequency_lock; // TRUE if frequency knob is locked
//
#define TX_DISABLE_OFF 0
#define TX_DISABLE_ALWAYS 1
#define TX_DISABLE_USER 2
#define TX_DISABLE_OUTOFRANGE 4
#define TX_DISABLE_RXMODE 8
uint8_t tx_disable; // >0 if no transmit permitted, use RadioManagement_IsTxDisabled() to get boolean
uint16_t flags1; // Used to hold individual status flags, stored in EEPROM location "EEPROM_FLAGS1"
#define FLAGS1_TX_AUTOSWITCH_UI_DISABLE 0x01 // if on-screen AFG/(STG/CMP) and WPM/(MIC/LIN) indicators are changed on TX
#define FLAGS1_SWAP_BAND_BTN 0x02 // if BAND-/BAND+ buttons are to be swapped in their positions
#define FLAGS1_MUTE_LINEOUT_TX 0x04 // if TX audio output from LINE OUT is to be muted during transmit (audio output only enabled when translate mode is DISABLED
#define FLAGS1_AM_TX_FILTER_DISABLE 0x08 // if AM TX has transmit filter DISABLED
#define FLAGS1_SWAP_FWDREV_SENSE 0x10 // if FWD/REV A/D inputs from RF power detectors are to be reversed
#define FLAGS1_FREQ_LIMIT_RELAX 0x20 // if Frequency tuning is to be relaxed
#define FLAGS1_SSB_TX_FILTER_DISABLE 0x40 // if SSB TX has transmit filter DISABLED
#define FLAGS1_WFALL_ENABLED 0x80 // 1 = Waterfall display
#define FLAGS1_SCOPE_ENABLED 0x100 // 1 = Scope display
#define FLAGS1_DYN_TUNE_ENABLE 0x200 // 0 = dynamic tune is disabled, 1 = dynamic tune is enabled
#define FLAGS1_SAM_ENABLE 0x400 // 0 = SAM mode is disabled, 1 = SAM mode is enabled
#define FLAGS1_CAT_IN_SANDBOX 0x800 // 0 = CAT works on band storage, 1 = CAT works in sandbox
#define FLAGS1_SCOPE_LIGHT_ENABLE 0x1000 // 0 = Spectrum normal, 1 = Spectrum light
#define FLAGS1_TX_OUTSIDE_BANDS 0x2000 // 1 = TX outside bands enabled
#define FLAGS1_REVERSE_X_TOUCHSCREEN 0x4000 // 1 = X direcction of touchscreen is mirrored
#define FLAGS1_REVERSE_Y_TOUCHSCREEN 0x8000 // 1 = Y direcction of touchscreen is mirrored
uint16_t expflags1; // Used to hold flags for options in menu, stored in EEPROM location "EEPROM_EXPFLAGS1"
#define EXPFLAGS1_SMOOTH_DYNAMIC_TUNE 0x01 // 1 = Smooth dynamic tune is ON
#define EXPFLAGS1_CB_27MC_TX_ENABLE 0x02 // 1 = Enable transmitting (4W) on CB band 27 MHz (AM, FM, SSB)
#define EXPFLAGS1_CB_26MC_TX_ENABLE 0x04 // 1 = Enable transmitting (4W) on CB band 26 MHz (AM, FM, SSB)
#define EXPFLAGS1_CB_12W_SSB_TX_ENABLE 0x08 // 1 = Enable transmitting 12W SSB on CB bands, where TX is open
#define EXPFLAGS1_WIDE_SPEC_DEF 0x10 // 1 = Enable default wide spectrum on screen
#define EXPFLAGS1_NO_SHOW_BNDMEM 0x20 // 1 - Don't show BndMemory on screen
#define EXPFLAGS1_BANDCH_JUMP_SWAP 0x40 // 1 - LongAction of Band+/- is band change, ShortAction is jump by freq on panorama width
#define EXPFLAGS1_TUNE_HELPER_DEFENABLE 0x80 // 1 - Tune Helper enable by default
#define EXPFLAGS1_ENC1_REVERSE 0x100 // 1 - encoder1 are reversed
#define EXPFLAGS1_ENC4_REVERSE 0x200 // 1 - encoder4 (TUNE) are reversed
#define EXPFLAGS1_SHOW_GREETING 0x400 // 1 - Amber/Axis - show once on start the greeting for foreign buyers
#define EXPFLAGS1_CLEAR_PAN_ON_TX 0x800 // 1 - clear panoram on TX/TUNE
#define EXPFLAGS1_SMETER_AM_NOT_LO 0x1000 // 1 - Don't calculate LO for S-meter in AM mode
#define EXPFLAGS1_FAST_MACRO_1_2 0x2000 // 1 - Fast TXing CW macros 1, 2
#define EXPFLAGS1_CLEAR_TX_CW_RTTY_BPSK 0x4000 // 1 - Forming CW/RTTY/BPSK signal at intermediate frequency for clean TX
#define EXPFLAGS1_CB_10W_TX_ENABLE 0x8000 // 1 - Enable transmitting 10W for any mode on CB bands, where TX is open
#define EXPFLAGS1_CONFIG_DEFAULT 0x0000 // Default flags state
uint16_t expflags2; // Used to hold flags for options in menu, stored in EEPROM location "EEPROM_EXPFLAGS2"
#define EXPFLAGS2_TEMP_MEM_BW_MOD_BAND 0x01 // 1 - Remember the filter settings of each mode in each range for the duration of the session
#define EXPFLAGS2_ILLUM_BUTT 0x02 // 1 - Amber, illumination of buttons is ON
#define EXPFLAGS2_3_ADD_BPF 0x04 // 1 - On Amber-RF board the BPF-option is present, add. BPF 6, 160 and <160m (usually 6 and <=160m)
#define EXPFLAGS2_XVTR_OFF_PA 0x08 // 1 - Amber - OFF PA in XVTR mode TX
#define EXPFLAGS2_DISABLE_TP 0x10 // 1 - Disabled touchscreen actions
#define EXPFLAGS2_FMENUS_SELECT 0x20 // 0 - carousel, 1 - menu
#define EXPFLAGS2_AMBER_4INCH_F6_IND 0x40 // Amber 4": 0 - Soft, 1 - AT (Autotuner UT0UM)
#define EXPFLAGS2_AMBER_4INCH_F7_IND 0x80 // Amber 4": 0 - AT, 1 - POWER
#define EXPFLAGS2_ALT_PWR_CTRL 0x100 // 1 - Alternative POWER level control via DAC -> mosfet in TX preamp
#define EXPFLAGS2_IMPROV_IQ_ADJ 0x200 // 1 - Improved I/Q adjusting. Added 160, 40, 30, 17, 12m
#define EXPFLAGS2_ENC2_REVERSE 0x400 // 1 - encoder2 are reversed
#define EXPFLAGS2_ENC3_REVERSE 0x800 // 1 - encoder3 are reversed
#define EXPFLAGS2_BEEP_GEN 0x1000 // 1 - Beep (as button beep set) when the band border is crossed
#define EXPFLAGS2_SHOW_SWR_ONLY_TUNE 0x2000 // 1 - Show SWR only in TUNE mode.
#define EXPFLAGS2_CONTEST_MODE_F3_ON 0x4000 // 1 - Contest mode F3 activation is ON.
//#define EXPFLAGS2_BLABLABLA 0x8000 // reserved
#define EXPFLAGS2_CONFIG_DEFAULT 0x0000 // Default flags state
uint16_t expflags3; // Used to hold flags for options in menu, stored in EEPROM location "EEPROM_EXPFLAGS3"
#define EXPFLAGS3_BAND_OFF_160M 0x01 // 1 - Remove this band from switching queue
#define EXPFLAGS3_BAND_OFF_80M 0x02 // 1 - Remove this band from switching queue
#define EXPFLAGS3_BAND_OFF_60M 0x04 // 1 - Remove this band from switching queue
#define EXPFLAGS3_BAND_OFF_40M 0x08 // 1 - Remove this band from switching queue
#define EXPFLAGS3_BAND_OFF_30M 0x10 // 1 - Remove this band from switching queue
#define EXPFLAGS3_BAND_OFF_20M 0x20 // 1 - Remove this band from switching queue
#define EXPFLAGS3_BAND_OFF_17M 0x40 // 1 - Remove this band from switching queue
#define EXPFLAGS3_BAND_OFF_15M 0x80 // 1 - Remove this band from switching queue
#define EXPFLAGS3_BAND_OFF_12M 0x100 // 1 - Remove this band from switching queue
#define EXPFLAGS3_BAND_OFF_10M 0x200 // 1 - Remove this band from switching queue
#define EXPFLAGS3_BAND_OFF_6M 0x400 // 1 - Remove this band from switching queue
#define EXPFLAGS3_LOW_BAND_BIAS_REDUCE_MORE 0x800 // 1 - Reduce power x20 (instead of x4) for F < 8 MHz.
//#define EXPFLAGS3_BLABLABLA 0x1000 // reserved
//#define EXPFLAGS3_BLABLABLA 0x2000 // reserved
//#define EXPFLAGS3_BLABLABLA 0x4000 // reserved
//#define EXPFLAGS3_BLABLABLA 0x8000 // reserved
#define EXPFLAGS3_CONFIG_DEFAULT 0x0000 // Default flags state
#ifdef UI_BRD_MCHF
// the default screen needs no reversed touch
#define FLAGS1_CONFIG_DEFAULT (FLAGS1_WFALL_ENABLED|FLAGS1_SCOPE_ENABLED)
#define TOUCHSCREEN_DF_MIRROR TOUCHSCREEN_NO_MIRROR_NOFLIP
#endif
#ifdef UI_BRD_OVI40
// the default screen needs reversed x axis touch
#define FLAGS1_CONFIG_DEFAULT (FLAGS1_REVERSE_X_TOUCHSCREEN)
#define TOUCHSCREEN_DF_MIRROR TOUCHSCREEN_X_MIRROR_NOFLIP
#endif
uint16_t flags2; // Used to hold individual status flags, stored in EEPROM location "EEPROM_FLAGS2"
#define FLAGS2_FM_MODE_ENABLE 0x01 // 0 if FM mode is DISABLED, 1 if FM mode is ENABLED
#define FLAGS2_FM_MODE_DEVIATION_5KHZ 0x02 // 0 if 2.5 kHz FM deviation, 1 for 5 kHz FM deviation
#define FLAGS2_KEY_BEEP_ENABLE 0x04 // 1 if key/button beep is enabled
#define FLAGS2_LOW_BAND_BIAS_REDUCE 0x08 // 1 if bias values for lower bands below 8Mhz have lower influence factor
#define FLAGS2_FREQ_MEM_LIMIT_RELAX 0x10 // 1 if memory-save versus frequency restrictions are to be relaxed
#define FLAGS2_TOUCHSCREEN_FLIP_XY 0x20 // 1 if touchscreen x and y are flipped
#define FLAGS2_HIGH_BAND_BIAS_REDUCE 0x40 // 1 if bias values for higher bands above 8Mhz have lower influence factor
#define FLAGS2_UI_INVERSE_SCROLLING 0x80 // 1 if inverted Enc2/Enc3 UI actions, clockwise goes previous UiMenu_RenderChangeItem, folds up menu groups
#define FLAGS2_CONFIG_DEFAULT (FLAGS2_HIGH_BAND_BIAS_REDUCE|FLAGS2_LOW_BAND_BIAS_REDUCE)
uint32_t sysclock; // This counts up from zero when the unit is powered up at precisely 100 Hz over the long term. This
// is NEVER reset and is used for timing certain events.
uint16_t version_number_minor; // version number - minor - used to hold version number and detect change
uint16_t version_number_major; // version number - build - used to hold version number and detect change
uint16_t version_number_release; // version number - release - used to hold version number and detect change
uint8_t cw_offset_mode; // CW offset mode (USB, LSB, etc.)
bool cw_lsb; // flag used to indicate that CW is to operate in LSB when TRUE
int32_t iq_freq_mode; // used to set/configure the I/Q frequency/conversion mode
uint8_t lsb_usb_auto_select; // holds setting of LSB/USB auto-select above/below 10 MHz
uint32_t last_tuning; // this is a timer used to prevent too fast tuning per second
uint32_t lcd_blanking_time; // this holds the system time after which the LCD is blanked - if blanking is enabled
bool lcd_blanking_flag; // if TRUE, the LCD is blanked completely (e.g. backlight is off)
bool xvtr_adjust_flag; // set TRUE if transverter offset adjustment is in process
bool SpectrumResize_flag; // set TRUE if waterfall/spectrum resize request from touchscreen action
bool VirtualKeysShown_flag; // set TRUE if virtual keypad displayed instead of spectrum/waterfall
const VKeypad* VirtualKeyPad; // pointer to virtual keyboard definition (if VirtualKeysShown_flag is set)
uint32_t SpectrumResize_timer; //
#define VFO_MEM_MODE_SPLIT 0x80
#define VFO_MEM_MODE_VFO_B 0x40
uint32_t vfo_mem_mode; // this is used to record the VFO/memory mode (0 = VFO "A" = backwards compatibility)
// LSB+6 (0x40): 0 = VFO A, 1 = VFO B
// LSB+7 (0x80): 0 = normal mode, 1 = Split mode (e.g. LSB=0: RX=A, TX=B; LSB=1: RX=B, TX=A)
uint32_t voltmeter_calibrate; // used to calibrate the voltmeter
bool dvmode; // TRUE if alternate (stripped-down) RX and TX functions (USB-only) are to be used
uint8_t txrx_switch_audio_muting_timing; // timing value used for muting TX audio when keying PTT to suppress "click" or "thump"
uint32_t audio_dac_muting_timer; // timer value used for muting TX audio when keying PTT to suppress "click" or "thump"
uint32_t audio_dac_muting_buffer_count; // the audio dac out will be muted for number of buffers
uint8_t filter_disp_colour; // used to hold the current color of the line that indicates the filter passband/bandwidth
bool audio_dac_muting_flag; // when TRUE, audio is to be muted after PTT/keyup
bool vfo_mem_flag; // when TRUE, memory mode is enabled
bool mem_disp; // when TRUE, memory list is enabled
bool xvtr_disp; // when TRUE, XVTR list is enabled
uint32_t fm_subaudible_tone_gen_select; // lookup ("tone number") used to index the table tone generation (0 corresponds to "tone disabled")
uint8_t fm_tone_burst_mode; // this is the setting for the tone burst generator
uint32_t fm_tone_burst_timing; // this is used to time/schedule the duration of a tone burst
uint8_t fm_sql_threshold; // squelch threshold "dial" setting
uint32_t fm_subaudible_tone_det_select; // lookup ("tone number") used to index the table for tone detection (0 corresponds to "disabled")
// key beep. Enabled via FLAGS2 !
uint32_t beep_frequency; // beep frequency, in Hz
uint8_t beep_loudness; // loudness of the key beep
uint32_t beep_timing; // countdown timer, used to activate beep and time the duration of a keyboard beep, in 1/100 ms
#define EEPROM_SER_NONE 0
#define EEPROM_SER_WRONG_SIG 1
#define EEPROM_SER_UNKNOWN 2
uint8_t ser_eeprom_type; // serial eeprom type
#define CONFIGSTORE_IN_USE_I2C 0x00
#define CONFIGSTORE_IN_USE_ERROR 0x05
#define CONFIGSTORE_IN_USE_RAMCACHE 0xAA
#define CONFIGSTORE_IN_USE_FLASH 0xFF
uint8_t configstore_in_use; // use to determine non-volatile memory configuration
mchf_touchscreen_t *tp;
bool show_debug_info; // show coordinates on LCD
bool show_wide_spectrum; // Mode of alternate full wide spectrum on screen
uint8_t tune_power_level; // TX power in antenna tuning function
uint8_t power_temp; // temporary tx power if tune is different from actual tx power
uint8_t cat_band_index; // buffered bandindex before first CAT command arrived
uint8_t xlat; // CAT <> IQ-Audio
// bool dBm_Hz_Test; // for testing only
// uint32_t dBm_count; // timer for calculating RX dBm
uint8_t display_dbm; // display dbm or dbm/Hz or OFF
uint8_t s_meter; // defines S-Meter style/configuration
uint8_t meter_colour_up;
uint8_t meter_colour_down;
uint8_t iq_auto_correction; // switch variable for automatic IQ correction
bool display_rx_iq;
// twinpeak_tested = 2 --> wait for system to warm up
// twinpeak_tested = 0 --> go and test the IQ phase
// twinpeak_tested = 1 --> tested, verified, go and have a nice day!
// twinpeak_tested = 8 -> we are waiting for the main loop to execute I2S restart
#define TWINPEAKS_WAIT 2
#define TWINPEAKS_DONE 1
#define TWINPEAKS_SAMPLING 0
#define TWINPEAKS_UNCORRECTABLE 3
#define TWINPEAKS_CODEC_RESTART 4
uint8_t twinpeaks_tested;
int32_t dbm_constant;
//#define DISPLAY_S_METER_STD 0
#define DISPLAY_S_METER_DBM 1
#define DISPLAY_S_METER_DBMHZ 2
// #define TX_FILTER_NONE 0
#define TX_FILTER_SOPRANO 1
#define TX_FILTER_TENOR 2
#define TX_FILTER_BASS 3
#define TX_FILTER_ESSB_4k 4
#define TX_FILTER_ESSB_5k 5
#define TX_FILTER_ESSB_6k 6
uint8_t tx_filter; // which TX filter has been chosen?
mchf_display_t* display;
uint32_t audio_int_counter; // used for encoder timing - test DL2FW
bool encoder3state;
int32_t bc_band;
Oscillator_ResultCodes_t last_lo_result; // used in dynamic tuning to hold frequency color
TuneToneMode tune_tone_mode;
uint16_t ramsize; // in KB, this is used to distinguish between 192 and 256 kB models.
uint8_t stream_tx_audio; // send tx audio via usb back
#define STREAM_TX_AUDIO_OFF 0 // send nothing
#define STREAM_TX_AUDIO_SRC 1 // send source audio stream (from CODEC)
#define STREAM_TX_AUDIO_FILT 2 // send processed audio stream (after filtering)
#define STREAM_TX_AUDIO_DIGIQ 3 // send final IQ signal
#define STREAM_TX_AUDIO_GENIQ 4 // generated "clean" IQ signal before final scaling and IQ phase/balance adjust
#define STREAM_TX_AUDIO_NUM 5 // how many choices
bool digi_lsb; // flag used to indicate that mcHF is to operate in LSB when TRUE
bool dial_moved; // dial was moved, used to communicate with spectrum display code
uint32_t i2c_speed[2]; // store comm speed for the 2 I2C buses
#define I2C_BUS_1 0
#define I2C_BUS_2 1
bool rtc_present; // a supported rtc was found and is active
int16_t rtc_calib; // ppm variation value, unit 1 ppm
bool vbat_present; // we detected a working vbat mod
bool codec_present; // we detected a working codec
bool codecWM8731_Audio_present; // we detected a working codec
bool codecCS4270_present; // we detected a working codec
float32_t rf_gain_codecCS4270; // for imitation of RF-gain
bool rtty_atc_enable; // is ATC enabled for RTTY decoding? (for testing!)
uint8_t enable_rtty_decode; // new rtty encoder (experimental)
uint8_t cw_decoder_enable;
bool cw_offset_shift_keep_signal; // experimental flag, shall we move shift by sidetone frequency to keep tuned signal?
bool enable_ptt_rts; // disable/enable ptt via virtual serial port rts
keyer_mode_t keyer_mode; // disable/enable keyer mode for F1-F5 buttons
// bool buffered_tx; // disable/enable buffered sending for CW and digital modes
uint8_t keyer_mode_tx; // mode of TX in CW keyer mode
bool keyer_cycled_tx_active; // active repeating TX in keyer mode
uint32_t keyer_cycled_tx_timer; // timer for repeating TX in keyer mode
uint8_t keyer_cycled_tx_button; // for repeating TX in keyer mode - activated button
uint8_t keyer_cycled_interval; // in sec.
uint32_t cw_beacon_interval; // in 1/100 of sec.
uint8_t swbi; // cw beacon interval numerator
uint8_t peak_ind_tune; // in 0.25 sec, 0 is OFF
bool ExtFMenuActive; // active external menu for buttons F1...F5
bool XvtrFMenuActive; // active XVTR menu for buttons F1...F5
bool MenuOfFMenusActive; // active menu for coise the F-menu
#ifdef USE_TWO_CHANNEL_AUDIO
bool stereo_enable; // enable/disable stereo demodulation (only in special hardware, NOT in mcHF)
#endif
#ifdef USE_LEAKY_LMS
bool enable_leaky_LMS;
#endif
uint8_t debug_si5351a_pllreset;
uint16_t graticulePowerupYpos; //initial (after powerup) position of graticule (frequency bar)
const LcdLayout* Layout; //current lcd layout (set by lcd detection routine)
uint8_t FreqDisplayFont; //0= old thin font, 1=new bold 8 bit (if available)
RfBoard_t rf_board; // the detected rf board connected to the control logic
uint8_t special_functions_enabled;
bool txrx_switching_enabled;
bool paddles_active; // setting this to false disables processing of external gpio interrupts (right now just the paddles/PTT)
uint8_t debug_vswr_protection_threshold; // 1 - protection OFF
// noise reduction gain display in spectrum
int16_t nr_gain_display; // 0 = do not display gains, 1 = display bin gain in spectrum display, 2 = display long_tone_gain
// 3 = display bin gain multiplied with long_tone_gain
bool lotx_dacs_present; // TX LO Supression DACs MCP4725 (x096/x97) is present?
int16_t cal_lo_tx_supr0[15]; // Band calibrated values for DACs MCP4725
int16_t cal_lo_tx_supr1[15]; // Band calibrated values for DACs MCP4725
uint8_t band_index; // Index of current band in table (by tune freq)
bool HereIsEnableCB26Mc; // Tune on enable CB band 26 Mc
bool HereIsEnableCB27Mc; // Tune on enable CB band 27 Mc
uint8_t band_lo_tx_supr; // The band the currently selected frequency is in (CB bands == 24/28 MHz)
uint8_t band_lo_tx_supr_old; // Old value
#define MIN_LO_TX_SUPR_BALANCE 48 // Minimum setting for TX LO Supression balance
#define MAX_LO_TX_SUPR_BALANCE 4000 // Maximum setting for TX LO Supression balance
#define LO_TX_SUPR_DAC0_WRITE 192 // address I2C_2
#define LO_TX_SUPR_DAC0_READ 193 // address I2C_2
#define LO_TX_SUPR_DAC1_WRITE 194 // address I2C_2
#define LO_TX_SUPR_DAC1_READ 195 // address I2C_2
//#ifdef SDR_AMBER
uint8_t amber_input_state; // Amber - state of RX input group
#ifdef SDR_AMBER
bool amber_io8_present; // Amber - I/Ox8 PCF8574A is present?
uint8_t amber_io8_state;
#define AMBER_IO8_WRITE 112 // address I2C_2
bool amber_io4_present; // Amber - I/Ox4 PCA9536 is present?
uint8_t amber_io4_state;
uint8_t amber_pa_bandcode_mode;
#define AMBER_IO4_WRITE 130 // address I2C_2
bool amber_dac_pwr_tx_present; // Amber - DAC MCP4725 for TX PWR reg. is present?
int16_t amber_dac_pwr_tx_state;
#define AMBER_DAC_PWR_TX_WRITE 194 // address I2C_1
#define AMBER_CS4270_WRITE 144 // address I2C_4
#define AMBER_CS4270_READ 145 // address I2C_4
#endif
uint8_t anr_n_taps;
uint8_t anr_delay;
uint16_t anr_two_mu_int;
uint16_t anr_gamma_int;
uint8_t dummy;
#ifdef FAST_FREQ_ENC
uint16_t freq_enc_timer;
#endif
bool disabled_tp;
int32_t iq_freq_delta;
uint8_t reverb_gain;
uint8_t reverb_delay;
bool it_is_band;
#ifdef HELP_MENU
uint16_t menu_selected_item;
bool help_showing;
#endif
//Contest mode - F4IYT
//uint8_t cq_colour;
uint8_t maxi_pos_contest;
uint32_t matrix_contest[24];
uint8_t pos_id_contest;
uint8_t maxi_pos_contesttry;
uint32_t matrix_contesttry[24];
uint8_t pos_id_contesttry;
uint8_t swtcqtry;
int cmem_colour;
//Contest mode - end
uint32_t temp_dial_freq; // Need in the RX Slide mode
} TransceiverState;
extern __IO TransceiverState ts;
//extern TransceiverState ts;
#define POWERDOWN_DELAY_COUNT 30 // Delay in main service loop for the "last second" before power-down - to allow EEPROM write to complete
//#define CODEC_USE_SPI
#define DEBUG_COM USART1
/**
* @brief Introduces about 40ms of delay (load dependent, since interrupt eats some of the time.
*/
// TODO: Measure raw time for this loop
#define non_os_delay() \
do { \
register uint32_t i; \
for (i = 0; i < 1000000; ++i) \
__asm__ __volatile__ ("nop\n\t":::"memory"); \
} while (0)
// ------------------------------------------------------------------
// Exports
typedef enum {
LED_STATE_OFF = 0,
LED_STATE_ON = 1,
LED_STATE_TOGGLE = 2
} ledstate_t;
void Board_SetPaBiasValue(uint16_t bias);
void Board_HandlePowerDown(void);
void Board_SelectLpfBpf(uint8_t group);
void Board_InitMinimal(void);
void Board_InitFull(void);
void Board_PostInit(void);
void Board_Reboot(void);
void Board_Powerdown(void);
void Board_EnableTXSignalPath(bool tx_enable);
void Board_GreenLed(ledstate_t state);
void Board_RedLed(ledstate_t state);
#ifdef UI_BRD_OVI40
void Board_BlueLed(ledstate_t state);
#endif
#ifdef SDR_AMBER
void Board_IllumButt(void);
uint16_t Board_AmberIOx8_Write(uint8_t value);
void Board_Amber_InputStateSet(uint8_t code);
uint16_t Board_AmberIOx4_Write(uint8_t command, uint8_t value);
uint16_t Board_AmberCS4270_Write(uint8_t map, uint8_t value);
#endif
bool Board_PttDahLinePressed(void);
#ifdef SDR_AMBER_PTT_ALT
bool Board_PttAltLinePressed(void);
#endif
bool Board_DitLinePressed(void);
uint32_t Board_RamSizeGet(void);
void Board_RamSizeDetection(void);
const char* Board_BootloaderVersion(void);
// in main.c
void CriticalError(uint32_t error);
bool is_vfo_b(void);
void CW_Smooth_Settings(void);
static inline bool is_ssb_tx_filter_enabled(void)
{
return (ts.tx_filter != 0);
// return (ts.flags1 & FLAGS1_SSB_TX_FILTER_DISABLE) == false;
}
static inline bool is_ssb(const uint32_t dmod_mode)
{
return (dmod_mode == DEMOD_LSB || dmod_mode == DEMOD_USB);
}
static inline bool is_splitmode(void)
{
return (ts.vfo_mem_mode & VFO_MEM_MODE_SPLIT) != 0;
}
static inline bool is_scopemode(void)
{
return (ts.flags1 & FLAGS1_SCOPE_ENABLED) != 0;
}
static inline bool is_waterfallmode(void)
{
return (ts.flags1 & FLAGS1_WFALL_ENABLED) != 0;
}
bool is_dsp_nb_active(void);
bool is_dsp_nb(void);
bool is_dsp_nr(void);
bool is_dsp_anr(void);
bool is_dsp_nr_postagc(void);
bool is_dsp_notch(void);
bool is_dsp_mnotch(void);
bool is_dsp_mpeak(void);
#ifdef USE_PENDSV_FOR_HIGHPRIO_TASKS
extern void UiDriver_TaskHandler_HighPrioTasks();
#endif
#endif
// For DACs MCP4725 - on band carrier TX depression
uint16_t LO_TX_SUPR_DAC_WriteReg(uint8_t qitem, uint16_t cal_value);
#ifdef SDR_AMBER
uint16_t ALT_RWP_CTRL_DAC_WriteReg(uint16_t vol_value);
#endif
void LO_TX_SUPR_DAC_GetBand(uint32_t freq);
#ifndef UI_BRD_MCHF
void MIC_bias_set(void);
#endif
Reference in New Issue View Git Blame Copy Permalink