747 lines
20 KiB
C
747 lines
20 KiB
C
/**
|
|
******************************************************************************
|
|
* @file : usbd_conf.c
|
|
* @version : v1.0_Cube
|
|
* @brief : This file implements the board support package for the USB device library
|
|
******************************************************************************
|
|
* This notice applies to any and all portions of this file
|
|
* that are not between comment pairs USER CODE BEGIN and
|
|
* USER CODE END. Other portions of this file, whether
|
|
* inserted by the user or by software development tools
|
|
* are owned by their respective copyright owners.
|
|
*
|
|
* Copyright (c) 2018 STMicroelectronics International N.V.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted, provided that the following conditions are met:
|
|
*
|
|
* 1. Redistribution of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. Neither the name of STMicroelectronics nor the names of other
|
|
* contributors to this software may be used to endorse or promote products
|
|
* derived from this software without specific written permission.
|
|
* 4. This software, including modifications and/or derivative works of this
|
|
* software, must execute solely and exclusively on microcontroller or
|
|
* microprocessor devices manufactured by or for STMicroelectronics.
|
|
* 5. Redistribution and use of this software other than as permitted under
|
|
* this license is void and will automatically terminate your rights under
|
|
* this license.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
|
|
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
|
|
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
|
|
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
|
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/* Includes ------------------------------------------------------------------*/
|
|
#include "stm32h7xx.h"
|
|
#include "stm32h7xx_hal.h"
|
|
#include "usbd_def.h"
|
|
#include "usbd_core.h"
|
|
|
|
/* USER CODE BEGIN Includes */
|
|
|
|
/* USER CODE END Includes */
|
|
|
|
/* Private typedef -----------------------------------------------------------*/
|
|
/* Private define ------------------------------------------------------------*/
|
|
/* Private macro -------------------------------------------------------------*/
|
|
|
|
/* USER CODE BEGIN PV */
|
|
/* Private variables ---------------------------------------------------------*/
|
|
|
|
/* USER CODE END PV */
|
|
|
|
PCD_HandleTypeDef hpcd_USB_OTG_FS;
|
|
void _Error_Handler(char * file, int line);
|
|
|
|
/* External functions --------------------------------------------------------*/
|
|
void SystemClock_Config(void);
|
|
|
|
/* USER CODE BEGIN 0 */
|
|
/* USER CODE END 0 */
|
|
|
|
/* USER CODE BEGIN PFP */
|
|
/* Private function prototypes -----------------------------------------------*/
|
|
|
|
/* USER CODE END PFP */
|
|
|
|
/* Private functions ---------------------------------------------------------*/
|
|
|
|
/* USER CODE BEGIN 1 */
|
|
/* USER CODE END 1 */
|
|
|
|
/*******************************************************************************
|
|
LL Driver Callbacks (PCD -> USB Device Library)
|
|
*******************************************************************************/
|
|
/* MSP Init */
|
|
|
|
void HAL_PCD_MspInit(PCD_HandleTypeDef* pcdHandle)
|
|
{
|
|
GPIO_InitTypeDef GPIO_InitStruct;
|
|
if(pcdHandle->Instance==USB_OTG_FS)
|
|
{
|
|
/* USER CODE BEGIN USB_OTG_FS_MspInit 0 */
|
|
|
|
/* USER CODE END USB_OTG_FS_MspInit 0 */
|
|
|
|
/**USB_OTG_FS GPIO Configuration
|
|
PA11 ------> USB_OTG_FS_DM
|
|
PA12 ------> USB_OTG_FS_DP
|
|
*/
|
|
GPIO_InitStruct.Pin = GPIO_PIN_11|GPIO_PIN_12;
|
|
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
|
|
GPIO_InitStruct.Pull = GPIO_NOPULL;
|
|
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
|
|
GPIO_InitStruct.Alternate = GPIO_AF10_OTG1_FS;
|
|
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
|
|
|
|
/* Peripheral clock enable */
|
|
__HAL_RCC_USB_OTG_FS_CLK_ENABLE();
|
|
|
|
/* Peripheral interrupt init */
|
|
HAL_NVIC_SetPriority(OTG_FS_IRQn, 1, 0);
|
|
HAL_NVIC_EnableIRQ(OTG_FS_IRQn);
|
|
/* USER CODE BEGIN USB_OTG_FS_MspInit 1 */
|
|
|
|
/* USER CODE END USB_OTG_FS_MspInit 1 */
|
|
}
|
|
}
|
|
|
|
void HAL_PCD_MspDeInit(PCD_HandleTypeDef* pcdHandle)
|
|
{
|
|
if(pcdHandle->Instance==USB_OTG_FS)
|
|
{
|
|
/* USER CODE BEGIN USB_OTG_FS_MspDeInit 0 */
|
|
|
|
/* USER CODE END USB_OTG_FS_MspDeInit 0 */
|
|
/* Peripheral clock disable */
|
|
__HAL_RCC_USB_OTG_FS_CLK_DISABLE();
|
|
|
|
/**USB_OTG_FS GPIO Configuration
|
|
PA11 ------> USB_OTG_FS_DM
|
|
PA12 ------> USB_OTG_FS_DP
|
|
*/
|
|
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_11|GPIO_PIN_12);
|
|
|
|
/* Peripheral interrupt Deinit*/
|
|
HAL_NVIC_DisableIRQ(OTG_FS_IRQn);
|
|
|
|
/* USER CODE BEGIN USB_OTG_FS_MspDeInit 1 */
|
|
|
|
/* USER CODE END USB_OTG_FS_MspDeInit 1 */
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Setup stage callback
|
|
* @param hpcd: PCD handle
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
|
|
{
|
|
USBD_LL_SetupStage((USBD_HandleTypeDef*)hpcd->pData, (uint8_t *)hpcd->Setup);
|
|
}
|
|
|
|
/**
|
|
* @brief Data Out stage callback.
|
|
* @param hpcd: PCD handle
|
|
* @param epnum: Endpoint number
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
|
{
|
|
USBD_LL_DataOutStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->OUT_ep[epnum].xfer_buff);
|
|
}
|
|
|
|
/**
|
|
* @brief Data In stage callback.
|
|
* @param hpcd: PCD handle
|
|
* @param epnum: Endpoint number
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
|
{
|
|
USBD_LL_DataInStage((USBD_HandleTypeDef*)hpcd->pData, epnum, hpcd->IN_ep[epnum].xfer_buff);
|
|
}
|
|
|
|
/**
|
|
* @brief SOF callback.
|
|
* @param hpcd: PCD handle
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
|
|
{
|
|
USBD_LL_SOF((USBD_HandleTypeDef*)hpcd->pData);
|
|
}
|
|
|
|
/**
|
|
* @brief Reset callback.
|
|
* @param hpcd: PCD handle
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
|
|
{
|
|
USBD_SpeedTypeDef speed = USBD_SPEED_FULL;
|
|
|
|
/* Set USB current speed. */
|
|
switch (hpcd->Init.speed)
|
|
{
|
|
case PCD_SPEED_HIGH:
|
|
speed = USBD_SPEED_HIGH;
|
|
break;
|
|
case PCD_SPEED_FULL:
|
|
speed = USBD_SPEED_FULL;
|
|
break;
|
|
|
|
default:
|
|
speed = USBD_SPEED_FULL;
|
|
break;
|
|
}
|
|
USBD_LL_SetSpeed((USBD_HandleTypeDef*)hpcd->pData, speed);
|
|
|
|
/* Reset Device. */
|
|
USBD_LL_Reset((USBD_HandleTypeDef*)hpcd->pData);
|
|
}
|
|
|
|
/**
|
|
* @brief Suspend callback.
|
|
* When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
|
|
* @param hpcd: PCD handle
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
|
|
{
|
|
/* Inform USB library that core enters in suspend Mode. */
|
|
USBD_LL_Suspend((USBD_HandleTypeDef*)hpcd->pData);
|
|
__HAL_PCD_GATE_PHYCLOCK(hpcd);
|
|
/* Enter in STOP mode. */
|
|
/* USER CODE BEGIN 2 */
|
|
if (hpcd->Init.low_power_enable)
|
|
{
|
|
/* Set SLEEPDEEP bit and SleepOnExit of Cortex System Control Register */
|
|
SCB->SCR |= (uint32_t)((uint32_t)(SCB_SCR_SLEEPDEEP_Msk | SCB_SCR_SLEEPONEXIT_Msk));
|
|
}
|
|
/* USER CODE END 2 */
|
|
}
|
|
|
|
/**
|
|
* @brief Resume callback.
|
|
* When Low power mode is enabled the debug cannot be used (IAR, Keil doesn't support it)
|
|
* @param hpcd: PCD handle
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
|
|
{
|
|
/* USER CODE BEGIN 3 */
|
|
/* USER CODE END 3 */
|
|
USBD_LL_Resume((USBD_HandleTypeDef*)hpcd->pData);
|
|
}
|
|
|
|
/**
|
|
* @brief ISOOUTIncomplete callback.
|
|
* @param hpcd: PCD handle
|
|
* @param epnum: Endpoint number
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
|
{
|
|
USBD_LL_IsoOUTIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
|
|
}
|
|
|
|
/**
|
|
* @brief ISOINIncomplete callback.
|
|
* @param hpcd: PCD handle
|
|
* @param epnum: Endpoint number
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
|
|
{
|
|
USBD_LL_IsoINIncomplete((USBD_HandleTypeDef*)hpcd->pData, epnum);
|
|
}
|
|
|
|
/**
|
|
* @brief Connect callback.
|
|
* @param hpcd: PCD handle
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
|
|
{
|
|
USBD_LL_DevConnected((USBD_HandleTypeDef*)hpcd->pData);
|
|
}
|
|
|
|
/**
|
|
* @brief Disconnect callback.
|
|
* @param hpcd: PCD handle
|
|
* @retval None
|
|
*/
|
|
void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
|
|
{
|
|
USBD_LL_DevDisconnected((USBD_HandleTypeDef*)hpcd->pData);
|
|
}
|
|
|
|
/*******************************************************************************
|
|
LL Driver Interface (USB Device Library --> PCD)
|
|
*******************************************************************************/
|
|
|
|
/**
|
|
* @brief Initializes the low level portion of the device driver.
|
|
* @param pdev: Device handle
|
|
* @retval USBD status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
|
|
{
|
|
/* Init USB Ip. */
|
|
if (pdev->id == DEVICE_FS) {
|
|
/* Link the driver to the stack. */
|
|
hpcd_USB_OTG_FS.pData = pdev;
|
|
pdev->pData = &hpcd_USB_OTG_FS;
|
|
|
|
hpcd_USB_OTG_FS.Instance = USB_OTG_FS;
|
|
hpcd_USB_OTG_FS.Init.dev_endpoints = 9;
|
|
hpcd_USB_OTG_FS.Init.speed = PCD_SPEED_FULL;
|
|
hpcd_USB_OTG_FS.Init.dma_enable = DISABLE;
|
|
hpcd_USB_OTG_FS.Init.ep0_mps = DEP0CTL_MPS_64;
|
|
hpcd_USB_OTG_FS.Init.phy_itface = PCD_PHY_EMBEDDED;
|
|
hpcd_USB_OTG_FS.Init.Sof_enable = ENABLE;
|
|
hpcd_USB_OTG_FS.Init.low_power_enable = DISABLE;
|
|
hpcd_USB_OTG_FS.Init.lpm_enable = ENABLE;
|
|
hpcd_USB_OTG_FS.Init.battery_charging_enable = DISABLE;
|
|
hpcd_USB_OTG_FS.Init.vbus_sensing_enable = DISABLE;
|
|
hpcd_USB_OTG_FS.Init.use_dedicated_ep1 = DISABLE;
|
|
if (HAL_PCD_Init(&hpcd_USB_OTG_FS) != HAL_OK)
|
|
{
|
|
_Error_Handler(__FILE__, __LINE__);
|
|
}
|
|
|
|
HAL_PCDEx_SetRxFiFo(&hpcd_USB_OTG_FS, 0x80);
|
|
HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 0, 0x20);
|
|
HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 1, 0x10);
|
|
HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 1, 0x10);
|
|
HAL_PCDEx_SetTxFiFo(&hpcd_USB_OTG_FS, 3, 0x80);
|
|
}
|
|
return USBD_OK;
|
|
}
|
|
|
|
/**
|
|
* @brief De-Initializes the low level portion of the device driver.
|
|
* @param pdev: Device handle
|
|
* @retval USBD status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
|
|
|
hal_status = HAL_PCD_DeInit(pdev->pData);
|
|
|
|
switch (hal_status) {
|
|
case HAL_OK :
|
|
usb_status = USBD_OK;
|
|
break;
|
|
case HAL_ERROR :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
case HAL_BUSY :
|
|
usb_status = USBD_BUSY;
|
|
break;
|
|
case HAL_TIMEOUT :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
default :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
}
|
|
return usb_status;
|
|
}
|
|
|
|
/**
|
|
* @brief Starts the low level portion of the device driver.
|
|
* @param pdev: Device handle
|
|
* @retval USBD status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
|
|
|
hal_status = HAL_PCD_Start(pdev->pData);
|
|
|
|
switch (hal_status) {
|
|
case HAL_OK :
|
|
usb_status = USBD_OK;
|
|
break;
|
|
case HAL_ERROR :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
case HAL_BUSY :
|
|
usb_status = USBD_BUSY;
|
|
break;
|
|
case HAL_TIMEOUT :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
default :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
}
|
|
return usb_status;
|
|
}
|
|
|
|
/**
|
|
* @brief Stops the low level portion of the device driver.
|
|
* @param pdev: Device handle
|
|
* @retval USBD status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
|
|
|
hal_status = HAL_PCD_Stop(pdev->pData);
|
|
|
|
switch (hal_status) {
|
|
case HAL_OK :
|
|
usb_status = USBD_OK;
|
|
break;
|
|
case HAL_ERROR :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
case HAL_BUSY :
|
|
usb_status = USBD_BUSY;
|
|
break;
|
|
case HAL_TIMEOUT :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
default :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
}
|
|
return usb_status;
|
|
}
|
|
|
|
/**
|
|
* @brief Opens an endpoint of the low level driver.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint number
|
|
* @param ep_type: Endpoint type
|
|
* @param ep_mps: Endpoint max packet size
|
|
* @retval USBD status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t ep_type, uint16_t ep_mps)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
|
|
|
hal_status = HAL_PCD_EP_Open(pdev->pData, ep_addr, ep_mps, ep_type);
|
|
|
|
switch (hal_status) {
|
|
case HAL_OK :
|
|
usb_status = USBD_OK;
|
|
break;
|
|
case HAL_ERROR :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
case HAL_BUSY :
|
|
usb_status = USBD_BUSY;
|
|
break;
|
|
case HAL_TIMEOUT :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
default :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
}
|
|
return usb_status;
|
|
}
|
|
|
|
/**
|
|
* @brief Closes an endpoint of the low level driver.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint number
|
|
* @retval USBD status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
|
|
|
hal_status = HAL_PCD_EP_Close(pdev->pData, ep_addr);
|
|
|
|
switch (hal_status) {
|
|
case HAL_OK :
|
|
usb_status = USBD_OK;
|
|
break;
|
|
case HAL_ERROR :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
case HAL_BUSY :
|
|
usb_status = USBD_BUSY;
|
|
break;
|
|
case HAL_TIMEOUT :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
default :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
}
|
|
return usb_status;
|
|
}
|
|
|
|
/**
|
|
* @brief Flushes an endpoint of the Low Level Driver.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint number
|
|
* @retval USBD status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
|
|
|
hal_status = HAL_PCD_EP_Flush(pdev->pData, ep_addr);
|
|
|
|
switch (hal_status) {
|
|
case HAL_OK :
|
|
usb_status = USBD_OK;
|
|
break;
|
|
case HAL_ERROR :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
case HAL_BUSY :
|
|
usb_status = USBD_BUSY;
|
|
break;
|
|
case HAL_TIMEOUT :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
default :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
}
|
|
return usb_status;
|
|
}
|
|
|
|
/**
|
|
* @brief Sets a Stall condition on an endpoint of the Low Level Driver.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint number
|
|
* @retval USBD status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
|
|
|
hal_status = HAL_PCD_EP_SetStall(pdev->pData, ep_addr);
|
|
|
|
switch (hal_status) {
|
|
case HAL_OK :
|
|
usb_status = USBD_OK;
|
|
break;
|
|
case HAL_ERROR :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
case HAL_BUSY :
|
|
usb_status = USBD_BUSY;
|
|
break;
|
|
case HAL_TIMEOUT :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
default :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
}
|
|
return usb_status;
|
|
}
|
|
|
|
/**
|
|
* @brief Clears a Stall condition on an endpoint of the Low Level Driver.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint number
|
|
* @retval USBD status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
|
|
|
hal_status = HAL_PCD_EP_ClrStall(pdev->pData, ep_addr);
|
|
|
|
switch (hal_status) {
|
|
case HAL_OK :
|
|
usb_status = USBD_OK;
|
|
break;
|
|
case HAL_ERROR :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
case HAL_BUSY :
|
|
usb_status = USBD_BUSY;
|
|
break;
|
|
case HAL_TIMEOUT :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
default :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
}
|
|
return usb_status;
|
|
}
|
|
|
|
/**
|
|
* @brief Returns Stall condition.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint number
|
|
* @retval Stall (1: Yes, 0: No)
|
|
*/
|
|
uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
|
{
|
|
PCD_HandleTypeDef *hpcd = (PCD_HandleTypeDef*) pdev->pData;
|
|
|
|
if((ep_addr & 0x80) == 0x80)
|
|
{
|
|
return hpcd->IN_ep[ep_addr & 0x7F].is_stall;
|
|
}
|
|
else
|
|
{
|
|
return hpcd->OUT_ep[ep_addr & 0x7F].is_stall;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* @brief Assigns a USB address to the device.
|
|
* @param pdev: Device handle
|
|
* @param dev_addr: Device address
|
|
* @retval USBD status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
|
|
|
hal_status = HAL_PCD_SetAddress(pdev->pData, dev_addr);
|
|
|
|
switch (hal_status) {
|
|
case HAL_OK :
|
|
usb_status = USBD_OK;
|
|
break;
|
|
case HAL_ERROR :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
case HAL_BUSY :
|
|
usb_status = USBD_BUSY;
|
|
break;
|
|
case HAL_TIMEOUT :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
default :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
}
|
|
return usb_status;
|
|
}
|
|
|
|
/**
|
|
* @brief Transmits data over an endpoint.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint number
|
|
* @param pbuf: Pointer to data to be sent
|
|
* @param size: Data size
|
|
* @retval USBD status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
|
|
|
hal_status = HAL_PCD_EP_Transmit(pdev->pData, ep_addr, pbuf, size);
|
|
|
|
switch (hal_status) {
|
|
case HAL_OK :
|
|
usb_status = USBD_OK;
|
|
break;
|
|
case HAL_ERROR :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
case HAL_BUSY :
|
|
usb_status = USBD_BUSY;
|
|
break;
|
|
case HAL_TIMEOUT :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
default :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
}
|
|
return usb_status;
|
|
}
|
|
|
|
/**
|
|
* @brief Prepares an endpoint for reception.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint number
|
|
* @param pbuf: Pointer to data to be received
|
|
* @param size: Data size
|
|
* @retval USBD status
|
|
*/
|
|
USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev, uint8_t ep_addr, uint8_t *pbuf, uint16_t size)
|
|
{
|
|
HAL_StatusTypeDef hal_status = HAL_OK;
|
|
USBD_StatusTypeDef usb_status = USBD_OK;
|
|
|
|
hal_status = HAL_PCD_EP_Receive(pdev->pData, ep_addr, pbuf, size);
|
|
|
|
switch (hal_status) {
|
|
case HAL_OK :
|
|
usb_status = USBD_OK;
|
|
break;
|
|
case HAL_ERROR :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
case HAL_BUSY :
|
|
usb_status = USBD_BUSY;
|
|
break;
|
|
case HAL_TIMEOUT :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
default :
|
|
usb_status = USBD_FAIL;
|
|
break;
|
|
}
|
|
return usb_status;
|
|
}
|
|
|
|
/**
|
|
* @brief Returns the last transfered packet size.
|
|
* @param pdev: Device handle
|
|
* @param ep_addr: Endpoint number
|
|
* @retval Recived Data Size
|
|
*/
|
|
uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
|
|
{
|
|
return HAL_PCD_EP_GetRxCount((PCD_HandleTypeDef*) pdev->pData, ep_addr);
|
|
}
|
|
|
|
/**
|
|
* @brief Delays routine for the USB device library.
|
|
* @param Delay: Delay in ms
|
|
* @retval None
|
|
*/
|
|
void USBD_LL_Delay(uint32_t Delay)
|
|
{
|
|
HAL_Delay(Delay);
|
|
}
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|