magnum88/UHSDR
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e663300109
UHSDR/UHSDR-active-devel/mchf-eclipse/hardware/uhsdr_board_config.h
Xavier e663300109 first commit
2022-08-24 08:39:13 +02:00

295 lines
11 KiB
C
Executable File
Raw Blame History

/* -*- mode: c; tab-width: 4; indent-tabs-mode: t; c-basic-offset: 4; coding: utf-8 -*- */
/************************************************************************************
** **
** UHSDR **
** a powerful firmware for STM32 based SDR transceivers **
** **
**--------------------------------------------------------------------------------**
** **
** Description: Please provide one **
** Licence: GNU GPLv3 **
************************************************************************************/
#ifndef __UHSDR_BOARD_CONFIG_H
#define __UHSDR_BOARD_CONFIG_H
#if defined(UI_BRD_MCHF) && defined(UI_BRD_OVI40)
#error Only one ui board can be selected: UI_BRD_MCHF, UI_BRD_OVI40
#elif defined(UI_BRD_OVI40)
#include "UHSDR_UI_ovi40_config.h"
#elif defined(UI_BRD_MCHF)
#include "UHSDR_UI_mchf_config.h"
#else
#error One ui board has to be selected: UI_BRD_MCHF, UI_BRD_OVI40
#endif
#if !defined(BOOTLOADER_BUILD)
// The rf boards we want to support, but the bootloader should compile for all if possible.
// so we don't tell the bootloader which one we have
#if !defined(RF_BRD_OVI40) && !defined(RF_BRD_MCHF) && !defined(RF_BRD_LAPWING)
#error At least one rf board must be selected: RF_BRD_MCHF, RF_BRD_OVI40, RF_BRD_LAPWING
#else
#if defined(RF_BRD_OVI40)
#include "UHSDR_RF_ovi40_config.h"
#endif
#if defined(RF_BRD_MCHF)
#include "UHSDR_RF_mchf_config.h"
#endif
#endif
#endif
#include "uhsdr_types.h"
//************DEFAULT_VALUES_IF_NOT_SET_IN_BOARD_CONFIG_FILES**********//
#if !defined(TRX_NAME)
#define TRX_NAME "mcHF QRP"
#endif //TRX_NAME
#if !defined(TRX_ID)
#define TRX_ID "mchf"
#endif // TRX_ID
#if !defined(TRX_HW_LIC)
#define TRX_HW_LIC "CC BY-NC-SA 3.0"
#define TRX_HW_CREATOR "K. Atanassov, M0NKA, www.m0nka.co.uk"
#endif // TRX_HW_LIC
#if !defined(__MCHF_SPECIALMEM)
#define __MCHF_SPECIALMEM
#endif
#if !defined(__UHSDR_DMAMEM)
#define __UHSDR_DMAMEM
#endif
#if !defined(DEVICE_STRING)
#define DEVICE_STRING TRX_NAME " Transceiver"
#endif
/***
* Please document all switches/parameters with what they are supposed to do and what values they can have.
* Please use proper naming:
* For capabilities of the software which can be enabled and disabled
* use USE_<CAPABILITY/FEATURENAME>
*
* These should be defined using #define USE_CAPABILITY
* or left undefined if not enabled so that these can be checked using #ifdef
*
* For related parameters DON'T USE USE_...
*
* In an ideal world please use PAR_<CAPABILITY/FEATURE>_<PARAMETERNAME> (we haven't done that yet)
* Please don't define constant or local parameters here, only those a user (!) is supposed to change as part of
* configuring a specific build variant.
*
*/
// Fast convolution filtering
// experimental at the moment DD4WH, 2018_08_18
//#define USE_CONVOLUTION
// old LMS noise reduction
// will probably never used any more
//#define OBSOLETE_NR
// this switches on the autonotch filter based on LMS algorithm
// leave this switched on, until we have a new autonotch filter approach
#define USE_LMS_AUTONOTCH
// save processor time for the STM32F4
// changes lowpass decimation filters to 89 taps instead of 199 taps
// because they run at 48ksps, this is a considerable decrease in processing power
#ifdef STM32F4
//#define USE_SMALL_HILBERT_DECIMATION_FILTERS
#endif
// save processor time for the STM32F4
// changes lowpass decimation filters to 89 taps instead of 199 taps
// because they run at 48ksps, this is a considerable decrease in processing power
// this is ONLY relevant for STM32F4 which has SPI !
// in those machines when enabling NR and other features, ui slows down . . .
// thus we should enable the small decimation filter in those machines
/**
* This parameter disables certain features / capabilites in order to achieve a minimum build size for
* the 192k ram / 512k flash STM32F4 machines. Unless you have such a machine, leave this disabled.
*/
//#define IS_SMALL_BUILD // ********************************** Small build (512k) Var. 1 (not good)
//#define R928_PLUS // ********************************** For R928 ets with Si5351a alone synthesizer
//#define OPEN_TX_OUTBAND // Open TX out of band (by Menu option) - not in use now
//#define GREY_STYLE // ********************************** Monochrome display style
//#define SEPIA_STYLE // ********************************** Monochrome display style
//#define SDR_AMBER // ********************************** Russian replica from UB8JDC (SDR)
//#define SDR_AMBER_480_320 // ********************************** Display 480x320 (3.5")
//#define SDR_AMBER_4INCH // ********************************** Display 480x320 (4.0")
//#define SDR_AMBER_PTT_ALT // ********************************** Work CW with pedal is ON - Amber only for F7 and H7!!!
//#define DDC_AXIS // ********************************** Russian replica from UB8JDC (DDC/DUC)
//#define OVI40_DISP_320_240 // ********************************** UHSDR don't love displays 320*240 now. Why?
//#define OVI40_MOD_480_320 // ********************************** Interface like Amber 480x320
#define FAST_FREQ_ENC // ********************************** The freq encoder is polled more often than 10ms.
//#define HELP_MENU // ********************************** Show help for system menu - need a lot of RAM
#if !defined(IS_SMALL_BUILD)
#define USE_8bit_FONT
#define USE_PREDEFINED_WINDOW_DATA
// OPTION with IS_SMALL_BUILD we are not automatically including USE_FREEDV as it uses lot of memory, both RAM and flash
#define USE_FREEDV // ********************************** Small build (512k) Var. 2
#endif // IS_SMALL_BUILD
#ifdef SDR_AMBER
#define DAC_5MW 0
#define DAC_05W 208
#define DAC_1W 298
#define DAC_2W 438
#define DAC_4W 758
#define DAC_5W 2048
#endif
// some special switches
//#define DEBUG_BUILD
//#define DEBUG_FREEDV
// if enabled the alternate (read new and better) noise reduction is active
// this is the standard NR now (Febr 2018)
#define USE_ALTERNATE_NR
#define USE_LEAKY_LMS // Named in interface as ANR
// you may optionally define the list of supported GFX drivers externally
// if you just define EXTERNAL_USE_GFX_CONFIG and no USE_GFX_...
// you will get a headless system using a dummy display driver
#ifndef EXTERNAL_USE_GFX_CONFIG
#define USE_GFX_ILI932x
#define USE_GFX_ILI9486
#define USE_GFX_ST7796
// #define USE_GFX_ILI9341
// SSD1289 support is not yet working, also requires USE_GFX_ILI932x to be enabled for now.
// #define USE_GFX_SSD1289
#define USE_DISP_480_320
#if defined(STM32F7) || defined(STM32H7)
#define USE_GFX_RA8875
#endif
#endif
#define USE_FFT_1024
// OPTION
#define USE_RTTY_PROCESSOR
// OPTION
#define USE_USBHOST
#ifdef USE_USBHOST
// define additional USBHOST related "switches" only here!
// #define USE_USBDRIVE
#define USE_USBKEYBOARD
#endif
// use the STM32 internal RTC with an external quartz and
// M1 and F3 connected to PD14 and PD15 (D0 and D1 of LCD) instead of PC14 and PC15 (to which the 32768 Hz quartz has to be connected)
#define USE_RTC_LSE
// multiple oscillators may be enabled, but only the first detected oscillator is issued
// i.e. there is currently only support for a single oscillator in a TRX.
// Support for LO based on SI570
#define USE_OSC_SI570
// Support for LO based on SI5351
#define USE_OSC_SI5351A
// Support for DUC/DDC board
#define USE_OSC_DUCDDC
// OPTION TO USE FLASH BASED CONFIGURATION STORAGE
#define USE_CONFIGSTORAGE_FLASH
// Option: If defined, high priority tasks are executed in the context of an PendSV interrupt
// which gives finishing these tasks a priority over "normal", less real-time critical longer running user control tasks
// such as display redraw.
// In general this should be defined but in case of issues one may want to execute High Prio tasks not concurrently
// to normal tasks, comment this in this case and see if the issue goes away. But this may cause other problems
// of course.
#define USE_PENDSV_FOR_HIGHPRIO_TASKS
// OPTION: Enable handling of TX/RX switching in an interrupt. Provides very low latency switching
// EXPERIMENTAL !!!
#define USE_HIGH_PRIO_PTT
// OPTION: IQ signal path now use 24bit samples from/to the codecs instead of the default 16bit. Slightly increases RAM usage (+0.5 - 1k).
// will finally work both on single and dual codec configurations.
#define USE_32_IQ_BITS
#define USE_32_AUDIO_BITS
// OPTION: Instead of band names for memories and enabling only band memories which are supported
// by the current RF board, use all available memories
// this changes the displayed memory name to Mem<Num> instead of Bnd<Wavelength>
#ifdef RF_BRD_LAPWING
#define USE_MEMORY_MODE
#define DEFAULT_MEMORY_FREQ (1240000000)
#endif
// for now: These are fixed.
#define IQ_SAMPLE_RATE (48000)
#define AUDIO_SAMPLE_RATE (48000)
// a lot of code pieces assume that this frequency
// is 1500 Hz, so don't change
#define IQ_INTERRUPT_FREQ (1500)
// we process one dma block of samples at once
// block sizes should be a power of two
// a lot of code process information in these blocks
#define IQ_BLOCK_SIZE (IQ_SAMPLE_RATE/IQ_INTERRUPT_FREQ)
#define AUDIO_BLOCK_SIZE (AUDIO_SAMPLE_RATE/IQ_INTERRUPT_FREQ)
// use for clocking based on DMA IRQ
#define SAMPLES_PER_DMA_CYCLE (IQ_BLOCK_SIZE)
#define SAMPLES_PER_CENTISECOND (IQ_SAMPLE_RATE/100)
#ifdef STM32F4
#define USE_SIMPLE_FREEDV_FILTERS
#define USE_FREEDV_1600
#else
#define USE_FREEDV_700D
#endif
#if (IQ_SAMPLE_RATE) != 48000
#error Only 48k sample frequency supported (yet).
#endif
#if (IQ_BLOCK_SIZE * 1500) != IQ_SAMPLE_RATE
#error Audio Interrupt Frequency must be 1500.
#endif
#if (IQ_SAMPLE_RATE/IQ_BLOCK_SIZE) != (AUDIO_SAMPLE_RATE/AUDIO_BLOCK_SIZE)
#error IQ Interrupt frequency must be idential to Audio Interrupt Frequency
#endif
//******************************CONFIGURATION_LOGIC_CHECKS************************************//
//#if !defined(USE_OSC_SI570) && !defined(USE_OSC_SI5351A)
#if !defined(USE_OSC_SI570) && !defined(USE_OSC_SI5351A) && !defined(USE_OSC_DUCDDC)
#error At least one of supported oscillators should be enabled.
#endif
#if !defined(USE_PENDSV_FOR_HIGHPRIO_TASKS) && defined(USE_HIGH_PRIO_PTT)
#error USE_HIGH_PRIO_PTT requires USE_PENDSV_FOR_HIGHPRIO_TASKS
#endif
#if defined(USE_32_IQ_BITS) && CODEC_NUM == 1
#define USE_32_AUDIO_BITS
#endif
#if !defined(USE_GFX_ILI932x) && !defined(USE_GFX_ILI9486)
#warning Both USE_GFX_ILI932x and USE_GFX_ILI9486 are disabled, no display driver will be available!
#endif
#if defined(UI_BRD_MCHF) && defined(USE_TWO_CHANNEL_AUDIO)
#error UI_BRD_MCHF does not permit USE_TWO_CHANNEL_AUDIO
#endif
#if CODEC_NUM == 1 && (defined(USE_32_IQ_BITS) && !defined(USE_32_AUDIO_BITS)) || (!defined(USE_32_IQ_BITS) && defined(USE_32_AUDIO_BITS))
#error With only one codec bit width of iq and audio must match, either define both USE_32_IQ_BITS and USE_32_AUDIO_BITS or none
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink